Step into a day on our molding floor
You arrive to a wall of live RJG eDART dashboardsnine presses, each running cavity-pressure transfer from fill to pack/hold. You scan curves, check limits, verify transfer at the approved setpoint, and walk the cell to confirm stable cycles. A startup needs first-piece approval; another machine shows a subtle peak-pressure drift. You adjust within authorized parameters, document changes, and keep production on pacesafely, repeatably, and with quality as the constant.
What you'll own
- Set up, start, adjust, and optimize injection molding machines per approved setup sheets and specifications.
- Execute mold, material, and color changeovers; release jobs once startup checks and first-piece verifications are complete.
- Lock in approved parameters (injection speed/pressure, barrel and mold temps, cooling, pack/hold, cycle time) and maintain process documentation.
- Ensure transfer to pack/hold is controlled by the approved cavity-pressure criteria, not merely by screw position or time.
- Oversee the performance and quality of all nine assigned machines, maintaining safe, consistent operations.
Using eDART and cavity pressure like a pro
- Operate and troubleshoot RJG eDART systems on each press; interpret pressure curves to assess stability, transfer, and packing.
- Track transfer pressure, peak pressure, pressure rise, curve shape, and other indicators; react to alarms and out-of-limit conditions per procedure.
- Identify abnormal signatures suggesting short shots, flash, dimensional shifts, sink, or warp; verify sensor health and channel mapping.
- Maintain approved profiles, process windows, transfer criteria, and alarm limits; leverage data for root cause, validation, and continuous improvement.
- Collaborate with Quality, Engineering, Maintenance, and RJG support for advanced troubleshooting and development.
- Use monitoring proactively to catch variation before it becomes scrap or customer impact.
Troubleshooting and optimization
- Diagnose and correct issues tied to machine, mold, material, sensors, or settings.
- Address defects including short shots, flash, sink marks, warpage, burns, splay, contamination, and dimensional nonconformance.
- Optimize cycle times without compromising approved pressure profiles or part quality; pursue OEE gains and scrap reduction.
- Perform root-cause analysis and implement corrective actions within authorized limits; document significant adjustments.
- Coordinate with Maintenance, Tooling, and Engineering on recurring mechanical, electrical, tooling, or process challenges.
Production coordination
- Stay ahead of priorities, cycle times, machine performance, and job queues across all nine machines.
- Respond quickly to stoppages, eDART alarms, process deviations, and quality concerns; monitor alarms and downtime trends.
- Work with operators to ensure materials, packaging, and handling are correct.
- Communicate machine status, delays, and open issues to the Production Manager; provide clear shift handoffs.
- Support scheduling, mold changeovers, and startups as needed.
Quality first
- Confirm molded parts meet dimensional, visual, and functional specifications.
- Perform or support first-piece and in-process inspections; verify correct resin, colorant, mold, and process specs are in use.
- Use pressure monitoring and process limits to hold quality steady; contain nonconforming material and notify Quality when required.
- Investigate deviations and correct before resuming production when procedures call for it; complete inspection and production records accurately.
- Support quality investigations, corrective actions, process validation, and CI initiatives.
Materials and auxiliary equipment
- Confirm material requirements up front; ensure proper drying, handling, blending, and loading per resin specs.
- Monitor dryers, loaders, temperature controllers, mold temp units, water lines, and other auxiliaries.
- Prevent mix-ups and contamination; identify material-related variation and its impact on pressure profiles and quality.
- Coordinate fixes for supply or auxiliary equipment issues.
What you bring
- High school diploma or GED required; technical training in plastics or manufacturing preferred.
- 3+ years in injection molding preferred with independent setup, processing, and troubleshooting capability.
- Hands-on RJG eDART experience and cavity-pressure monitoring required.
- Proven understanding of cavity-pressure-based transfer from injection to pack/hold required.
- Ability to read curves and spot process drift; knowledge of molding defects, variables, and corrective levers.
- Experience with mold/resin changes and auxiliaries (dryers, loaders, temperature controllers, etc.).
- Comfort with setup sheets, work instructions, control plans, and quality specs.
- Strong mechanical aptitude, keen attention to detail, and sharp problem-solving skills.
- Ability to manage priorities across nine presses and communicate clearly with production and support teams.
Language and math
- Must speak English.
- Fluency with addition, subtraction, multiplication, and division.
- Comfort switching among inches, millimeters, decimals, and similar units.
Digital tools
- Microsoft Office proficiency, including PowerPoint, Excel (data analysis, metrics, reporting), Word, and Teams.
- SAP experience is a plus.
Core proficiencies
- Injection Cavity Pressure Monitoring
- Injection Molding Systems
- Injection Molds and Dies
- Injection Molding Equipment Operations