Mobile, AL 36618 • (24.7 miles) • Full Time • 9/25/2026

Job Overview: We are seeking a detail-oriented and dependable Field Quality Control Inspector to join our team. This role involves walking residential construction sites to ensure all work meets established quality standards and complies with client and regulatory requirements. The ideal candidate will have hands-on experience in construction inspections and a strong understanding of residential building practices. Key Responsibilities:Conduct daily field inspections at residential job sites to verify that work meets quality, safety, and compliance standardsInspect construction activities such as trenching, conduit installation, grounding, structural mounting, and equipment placementEnsure contractors adhere to approved specifications, codes, and client requirementsDocument inspection find

Orange Beach, AL 36561 • (36 miles) • Full Time • 9/24/2026

Benefits:Free uniformsHealth insurancePaid time offTraining & developmentVision insurance401(k)401(k) matchingDental insuranceDonation matchingEmployee discountsTuition assistanceTURQUOISE PLACE HOT TUB TECHNICIANJob Summary: Responsible for maintenance and cleanliness of hot tubs in accordance with the Baldwin County and Spectrum Resorts standards. Job Duties:Performs chemical checks in a safe manner to insure required levels are maintained.Responsible for draining/refilling hot tubs as needed.Responsible for maintenance of cleanliness of tubs.Responsible for performing minor repairs such as replacing pillow mounts, cover clips, etc.Responsible for mopping out of each unit entered.Ability to perform other assigned duties.Job RequirementsExcellent communication skills, both oral and writte

Foley, AL 36535 • (26.2 miles) • Full Time • 9/24/2026

Mechanical Engineer / DesignerFoley, AL 36535 System One is seeking a Mechanical Engineer / Designer in Foley, Alabama to support industrial projects from concept through installation by developing mechanical/structural design packages and producing fabrication-ready drawings (dimensions/tolerances, weld symbols, material specs) while coordinating with engineers, fabricators, and plant/site personnel. This position requires industrial mechanical design experience (steel/aluminum preferred), knowledge of fabrication/welding/materials, and strong AutoCAD + SolidWorks drafting capability, plus clear communication and comfort working in an active industrial environment.Important Details:Contract-to-hire position Pay rate range: $30 - $50/hr. Salary will be commensurate with experience.Start da

Axis, AL 36505 • (40.4 miles) • Full Time • 9/24/2026

The Production Supervisor at AMVAC’s Axis, Alabama chemical manufacturing plant is responsible for overseeing safe and efficient plant operations and supervising production personnel. This position coordinates daily production activities, manages manpower, ensures product quality and safety compliance, and supports the achievement of production goals and Key Performance Indicators (KPIs).AMVAC®, an American Vanguard company, develops, manufactures, and markets products for agricultural and commercial use.Job Duties & Responsibilities:Supervise production personnel and coordinate manpower across assigned work areas.Plan and prioritize daily production activities to meet schedules, production targets, quality standards, and KPIs.Coach employees, evaluate performance, address personnel concer

Creola, AL 36525 • (36.3 miles) • Full Time • 9/23/2026

Seeking an experienced Burn Table and Plate Roller Operator to join our client's team in Creola, AL. This is a hands-on, high-volume production role supporting heavy fabrication projects. We are not looking to train entry-level workersThis position requires a seasoned professional with proven experience who can walk in and operate machinery independently on day one. You must also be willing to assist with other shop tasks as needed to keep production moving.The ideal candidate is safety-focused, mechanically skilled, and fully capable of independently burning plate and rolling plate, pipe, and angle profiles strictly to engineering prints.What You Will DoBurn Table Operation: Power up CNC burn tables from startup, load existing cutting programs, verify nesting layouts, and begin cutting wi

Mobile, AL 36611 • (27.6 miles) • Full Time • 9/22/2026

Turner Industries is a fully diversified industrial contractor. We help move the world forward by providing responsive, innovative solutions designed to increase plant production, reduce costs, reduce downtime, and even prevent shutdowns. Headquartered in Baton Rouge, LA, Turner Industries has over 20,000 employees with offices and job sites across the United States. Our single-solution approach in the petrochemical, refining, energy, pulp and paper, and related industries has made Turner one of the nation's top industrial contractors and earned us the No. 1 spot on ABC's 2024 Top Performers list. People are at the heart of everything we do. Their safety, security, and satisfaction have always been our top priorities. For proof, look no further than our strong working relationships and ext

Loxley, AL 36551 • (30.6 miles) • Full Time • 9/22/2026

Benefits:Vision insuranceCompetitive salaryDental insuranceHealth insuranceOpportunity for advancementPaid time offStock options planStone Interiors, a highly respected countertop fabricator specializing in granite, marble, and quartz, is seeking motivated individuals to join our team. Currently, we are looking for A CNC Operator with an exceptional work ethic who want to learn and grow with our dynamic company. Experience is required PRIMARY JOB DUTIES: 1) Quality Control. Efficiently operate the CNC machine in order to attain the required precision cuts for each job. Prior to cutting assigned pieces, preview the tool path cut on the control panel and verify point of origin. Review Autocad drawings and templates to ensure cut is correct. Ensure the correct material is on hand. Accuracy ra

Semmes, AL 36575 • (27.7 miles) • Full Time • 9/21/2026

Position Summary:The Plasma Table Operator receives instructions from the Production Manager or Team Leader pertaining to the assignments and expectations for the day. The operator will have been trained on the Plasma Table and will be required to follow processes and procedures either posted or directed by management.Duties and Responsibilities:Readies table for production.Checks to be sure the machine has the appropriate computer program and necessary tools.Monitors machine during use to address any problems and adjusts as needed.Inspect the finished product to ensure specifications have been met. This includes grade, thickness, and size, as well as other key measurements.Performs daily inspections using quality checkpoints before and after use along with weekly and monthly preventative

Mobile, AL • (20.9 miles) • Full Time • 9/20/2026

For more than 30 years, SQA Services has been a leading provider of managed supplier quality services, offering audits, assessments, remote surveillance, corrective actions, remediation, inspections, and engineering solutions to manufacturers across all industries. We deliver these services by deploying a network of highly skilled associates based throughout the United States and in over 90 countries worldwide, ensuring rapid on-site support at your supplier locations. Our associates are expert quality assurance professionals with extensive experience and local expertise, enabling us to represent our clients on-demand and with greater speed and efficiency than our competitors. We’re hiring for a Quality Mechanical Source Inspector position in Mobile, AL. The schedule is for operating busi

Mobile, AL 36607 • (22.4 miles) • Full Time • 9/20/2026

Benefits:401(k)401(k) matchingCompany partiesCompetitive salaryFlexible scheduleFree food & snacksFree uniformsPaid time offParental leaveTraining & development The CNC Operator, reporting to the general manager, oversees the daily functions of manufacturing machinery. The duties include running tests before the start of operations, programming and monitoring machines, quality control of the cutting as well as machine maintenance. Core tasks: Program the parts to be cut and operate the CNC according to the need.Respect the due date on the job and manage the prioritiesPrepare the placements before cutting to optimize the raw material.Make the placement checked by an other CNC operatorConfirm with the inventory the raw mat to useValidate the raw material: measure and check the quality before

Fairhope, AL 36532-5631 • (19.6 miles) • Full Time • 9/18/2026

Description: ESSENTIAL RESPONSIBILITIES:The Aircraft Component Technician is responsible for assisting in the performance of various aircraft component maintenance/inspection related tasks and duties as delegated by the shop leadership team.ESSENTIAL TASKS/DUTIES:Performs various technical/mechanical functions pertaining to aircraft component maintenance and inspection processes.Assist higher level technicians with various component tasks as necessary (cleaning, testing, paperwork, etc.)Perform various facility and equipment maintenance tasks as directed.Perform repairs on various types of aircraft components, while maintaining company specifications.Aid in evaluation to insure corrective measures; aid quality inspectors in completion of unit return to service.Perform multiple tasks demons

Mobile, AL 36618 • (24.7 miles) • Full Time • 9/18/2026

REN Seafoods is accepting applications for positions in our Production department. Duties may include:Perform tasks as directed based on daily receiving, shipping, and production schedules.Consistently maintain a clean and sanitary work area.Adheres to processing, sanitation, and food safety protocols.Demonstrates quality and safety awareness at all times.Process orders to customer specifications.Provide cutting, assembling, weighing, packing, labeling, palletizing, and other duties as required to complete production requirements.Follow GMP standards as directed.Follow Food Safety System requirements at the direction of the QA tech in the area.Qualifications:Ability to follow verbal and written directions.Basic Math SkillsBasic Computer SkillsBe able to stand for 8-10hours a day in cold an

Bay Minette, AL 36507 • (41.7 miles) • Full Time • 9/18/2026

Quality Engineer Dental Medical Device Manufacturing | DentalEZReady to make an impact where quality truly matters? DentalEZ in Bay Minette, Alabama, is seeking a hands-on Quality Engineer to support the full lifecycle of our dental medical devices-from design transfer through post-market support. In this role, you'll help ensure our products meet the highest standards of safety, performance, and regulatory compliance.What You'll Do Maintain and improve the Quality Management System (CAPA, NCMR, document control).Lead Root Cause Analysis and corrective actions using data-driven tools (5-Whys, Fishbone, Six Sigma).Support risk management activities (dFMEA, pFMEA) aligned with ISO 14971.Partner with suppliers on qualification, audits, and SCARs.Support compliance with the U.S. Food and Drug

Mobile, AL 36693 • (17.2 miles) • Full Time • 9/17/2026

Summary The Instrumentation Technician is a field-based, customer-facing role that installs, services, calibrates, and maintains TriNova Instrumentation at customer sites with minimal supervision. Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time.Essential Functions Calibrates, troubleshoots, and repairs a variety of flow meters, pressure transmitters, level transmitters, temperature transmitters, and valves to meet customer’s requirements.Determine possible system faults prior to departing for on-site service calls to determine test equipment and spare parts that may be required.Visually inspects, tests, and recommends changes to ensure required installation meets manufacturer’s standard

Mobile, AL 36693 • (17.2 miles) • Full Time • 9/17/2026

Shop TechnicianStrickland Brothers 10 Minute Oil ChangeJoin a thriving team where your growth is our priority!At our company, your career path is not just a journey; it’s a fast track to success. We’re committed to advancing our employees' careers and recognizing talent at every level.As a Shop Technician, you’ll be part of a fast-paced, team-driven environment where you learn real skills, work with your hands, and see the impact of your work every day. Many of our leaders started right here in entry-level roles and built successful careers through hands-on learning, teamwork, and performance. This is more than a job. It’s a chance to build a career.If you’re ready to elevate your career and make a meaningful impact, we want you on our team!Why Team Strickland:We invest in our team members

Mobile, AL • (20.9 miles) • Full Time • 9/17/2026

We're ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to lifefrom advancing space exploration and life-saving medical devices to building autonomous electric vehicles. With 3,000+ experts across North America, we partner with leading companies in aerospace, medical devices, robotics, automotive, commercial vehicles, EVs, rail, and more.As part of the global ALTEN Group57,000+ engineers in 30 countrieswe deliver across the entire product development cycle, from consulting to full project outsourcing.When you join ALTEN Technology USA, you'll collaborate on some of the world's toughest engineering challenges, supported by mentorship, career growth opportunities, and comprehensive benefits. We take pride in fostering a culture where employees feel value

Mobile, AL 36608 • (22.3 miles) • Full Time • 9/17/2026

Plant ManagerProvidence Park Rehabilitation & HealthCare Center in Mobile, AL is a place where you can grow and have a rewarding career opportunity. If you have a desire to work in the fast-paced geriatric rehabilitation environment, this is the opportunity for you!Summary: The Plant Manager will plan, organize and direct the overall operations of the maintenance department in accordance with current federal, state and local standards, ensuring that the facility is maintained in a safe, comfortable condition. Coordinate maintenance services with other departments; ensure outside services are properly completed and supervised in accordance with contracts. Assist in establishing and maintaining a preventive maintenance program and ensure compliance with fire and safety codes. Ensure proper m

Mobile, AL 36615 • (18.7 miles) • Full Time • 9/15/2026

Description: Hydro-blast/Vacuum Technician Level 2 (TECH 2) performs industrial hydro-blast, vacuum work, and associated labor in outages, shutdowns, turn arounds and general maintenance scopes. The work takes place in advanced manufacturing and power generation facilities throughout the US. This position is also occasionally responsible for assistance in some hydro-blasting scopes.Hydro-blast/Vacuum Technician Level 2 are required to travel, sometimes for long periods, to perform this work.· Adhere to the Atlas Core Values: Safety, Strong Work Ethic, Professionalism, and Honesty· Cooperate with Team Leader, coworkers, and customers in carrying out assigned work· Safely perform general labor as required, to include but not limited to shoveling, raking, using pickaxe, using hand and/or powe

Pascagoula, MS 39581 • (19.6 miles) • Full Time • 9/15/2026

Job Title: Craft-Departmental Superintendent (Structural)Location: Pascagoula, MSPosition Overview: A Craft/Departmental Supervisor is responsible for directing his/her workforce in the successful implementation of craft-specific activities as it relates to associated shipbuilding and/or repair functions.Key Responsibilities:· Directs and coordinates related department activities.· Develops, reviews, and maintains construction plans, schedules, budgets and other essential records.· Can read and interpret construction drawings, specifications and other technical guidance documentation.· Ensures material and labor resources necessary to accomplish tasks are readily available.· Maintains work schedules; works overtime as needed to minimize project delay.· Meets with other members of productio

Moss Point, MS 39562 • (22.5 miles) • Full Time • 9/15/2026

Create update and maintain Piping and Instrumentation Diagrams (P&IDs) that illustrate the flow of fluids, control systems, and equipment in industrial processes. They work closely with engineering teams to ensure the safe and efficient operation of complex systems. Key Responsibilities: P&ID Development: Create and update P&IDs using industry-standard software, such as AutoCAD, to accurately represent the layout and functionality of piping, equipment, and instrumentation in industrial processes. Collaboration: Work closely with mechanical engineers, process engineers, and other stakeholders to understand the requirements for P&IDs and ensure that they meet design specifications. Documentation: Generate detailed and clear P&ID documentation, including equipment symbols, instrument details,

Mobile, AL 36601 • (23.1 miles) • Full Time • 9/10/2026

Summary: Serves as a member of the front line production team. Responsible for various tasks that support the production of the high capacity commercial laundry plant in order to meet customer needs. The type of work performed could be related to the following: Dryer Operator, Wash Operator, Stain Washer, Sewing/Mending, Soil Sorting, as well as folding, commercial ironing, packing and distributing. Essential Duties and Responsibilities:Maintains flow of linen into the tunnel, washers, dryers, etc.Pulls bags and/or processes other laundry activities in the designated order.Loads linen into empty pockets in tunnel; continues to do so as pockets transfer.Keeps pockets loaded correctly with proper load size; prevents overload.Follows directions and safety precautions.Maintains the production

Mobile, AL • (20.9 miles) • Full Time • 9/10/2026

Job Summary The Painter/Blaster is responsible for surface preparation and application of protective coatings on structures, equipment, and vessels. This role ensures surfaces are properly cleaned, blasted, and coated to meet project specifications, safety standards, and quality requirements.Key Responsibilities Perform abrasive blasting (sandblasting, grit blasting, shot blasting) to prepare surfacesClean and prepare surfaces by removing rust, old paint, grease, and contaminantsApply coatings using brush, roller, or spray equipment according to specificationsMix and apply paints, primers, and protective coatings correctlyInspect surfaces before and after blasting and paintingMaintain blasting and painting equipment in safe working conditionFollow coating system requirements, thickness (DF

Moss Point, MS 39563 • (21.7 miles) • Full Time • 9/9/2026

Job Title: Shop Production ManagerLocation: Moss Point, MSReports to: Director of Railcar ServicesJob Overview: We are seeking a Production Manager that will lead day to day operations for the railcar repair activities at MSE Railcar Services. This role is responsible for safety, quality (in partnership with the Quality Director), production planning, production efficiency and regulatory compliance. The Production Manager leads and manages the shift leaders, car repair technicians, and must collaborate with other departments to ensure smooth, effective operations. This role is also responsible for collaborating with the business development team to ensure customer satisfaction and help grow the railcar repair business. The ideal candidate will demonstrate the following attributes:Team Lead

Mobile, AL 36602 • (23.4 miles) • Full Time • 9/7/2026

The Mixer is a lot like a Chef 1. You carefully PLAN your mixing to combine different ingredients and flavors 2. In an ?orderly?, ORGANIZED fashion in order to produce Wet Willie?s many unique flavors. 3. You have to exhibit ACCURACY while at times working at a demanding pace, in order to accomplish product CONSISTENCY and maintain adequate supplies of product for our staff and customers. 4. You maintain high standards of SAFETY and SANITATION in all your duties So, the Mixer?s job description is preparing our World's Famous Daiquiris following our receipes

Theodore, AL 36582 • (9.5 miles) • Full Time • 9/6/2026

Benefits:401(k)401(k) matchingDental insuranceHealth insurancePaid time offJob Summary: We are seeking a detail-oriented Mechanical Planner with hands-on experience using SAP to support maintenance and turnaround planning activities. The ideal candidate will be responsible for developing job plans, managing work orders, and coordinating materials, labor, and equipment to ensure safe, efficient, and timely mechanical maintenance execution. Key Responsibilities:Develop detailed job plans for mechanical maintenance work, including labor estimates, materials, tools, and equipment requirements.Use SAP to create, update, and manage work orders, notifications, BOMs, task lists, and maintenance plans.Review equipment history and failure data to support root cause analysis and continuous improvemen

Robertsdale, AL 36567 • (39.7 miles) • Full Time • 9/5/2026

The senior aviation component technical role is considered to be an expert and a leader. Personnel performing maintenance functions report to the Lead Technician and are responsible for performing maintenance and alteration tasks on civil and government aviation articles in accordance with current technical data provided in the manufacturer’s instruction for continued airworthiness, service bulletins, service letters, Airworthiness Directives, government and industry standard practices and other data acceptable to or approved by the FAA.A sample of duties includes but is not limited to:Diagnose difficult intermittent failuresLead major and/or complex repairsConduct advanced troubleshootingSolid functional testing abilitiesAble to identify manual discrepanciesPromote, execute,and adhere to

Mobile, AL 36693 • (17.2 miles) • Full Time • 9/4/2026

At Challenge Testing Inc. we take a great deal of pride in the quality of our employees, and it is emphasized our vested interest in your personal, professional development and welfare. Our efforts are intended to assist in the realization of your full potential. Our Company’s future success depends upon YOU!NDT Technician Challenge Testing is looking for qualified NDT Technicians preferably with experience in Aerospace or Physical Lab. Requirements include but may not be limited to: Must be thoroughly familiar with the scope and limitations of the method in which certified and willing to maintain up-to-date competency relevant to the position. Must be familiar with or willing to familiarize themselves with the codes, standards and other contractual documents that control the method as uti

Axis, AL 36505 • (40.4 miles) • Full Time • 9/4/2026

Pump MechanicJoin the Voigt-Abernathy TeamVoigt-Abernathy is a leading distributor and service provider of industrial rotating and process equipment throughout the Southeast. We specialize in pumps, pumping systems, seals, mixers, filtration, and engineered process solutions for customers across a wide range of industries.Our reputation has been built on technical expertise, exceptional customer service, and quality workmanship. We invest in our employees by providing ongoing training, opportunities for advancement, and a safe, team-oriented work environment.If you enjoy solving mechanical problems, take pride in quality repairs, and want to build a long-term career with a growing company, we'd like to hear from you.Position SummaryVoigt-Abernathy is seeking an experienced Pump Mechanic to

Mobile, AL 36695 • (18.7 miles) • Full Time • 9/4/2026

Apply NowRTL, C/C++, Python, VHDL, Verilog, Tcl, cryptography, hardware, embedded software, System Integration, Hardware Security, Xilinx, Simulation, IP core, Versal, Stratix, concept to deployment, Vivado, GHDL, Questa, Quartus Prime, Zynq, Agilex, AXI, ACE, Avalon, FPGA verification tools,reverse engineering, cocotb, pyuvmFull TimeTravel required to 10%.Must be able to apply for and maintain a U.S. Government Security ClearanceFPGA EngineerThe EndoSec FPGA Engineer is responsible for the design, development, testing, and maintenance of IP cores and FPGA-based systems used in hardware security applications.Key ResponsibilitiesFPGA Design and Development: Design and develop IP cores and FPGA configurations implementing the latest in leakage-resilient hardware cryptography algorithms using

Theodore, AL 36582 • (9.5 miles) • Full Time • 10/1/2026

Description: The JF Petroleum Group stands as a premier leader in the North American fueling infrastructure industry, offering comprehensive turn-key solutions for distribution, construction, and service needs. We serve a diverse clientele including retail fueling stations, commercial and government fleets, and emergency power customers.The Service Technician has a wide variety of skills and will be able to work through difficult problems. This person installs, maintains & repairs fuel dispensers; submersible fuel pumps; service station site controllers; credit card readers; cash register consoles; pumping PCW; tank & line monitoring equipment; various other types of equipment found in service station and convenience gas stations. Pay range: $20.60-33.25/hr dependent on experience.Work in

Mobile, AL 36608 • (22.3 miles) • Full Time • 10/1/2026

Who We AreOWL Services is the premier sales, installation, program management and service provider to retail, commercial, fleet, aviation and marine, and emergency power generation companies across the U.S.With 33 offices and distribution centers and more than 1,400 field service professionals, OWL delivers on a service platform that includes construction, compliance and testing, maintenance and repair, modernization and re-imaging, and EV charging solutions to keep businesses and people moving 24 hours a day, 7 days a week, 365 days a year. OWL Services’ companies have received numerous awards over the years for exemplary customer service. Most recently it was the recipient of EVgo’s Deployment Excellence Award in its first-ever class of awardees in the National EV Charging Recognition Pr

Mobile, AL • (20.9 miles) • Full Time • 9/30/2026

Job Summary: We are looking for aService Technician to join our growing team! The right candidate will have a strong service technician background and ASE certified. The day-to-day duties include performing work on specific repair orders and diagnosing what repairs need to be done. U-J Chevrolet is proud of its service to Mobile and of its many accomplishments since its founding in 1939. We are equally proud of the people who have made it successful as well as an interesting place to work. You can be sure that a career with U-J will be challenging, enjoyable and rewarding.Benefits available to Full-Time employees include:Blue Cross and Blue Shield Health InsuranceDental InsuranceVision InsuranceLife InsuranceDisability Insurance401 (k) PlanResponsibilities Perform work specified on the re

Mobile, AL 36695 • (18.7 miles) • Full Time • 9/30/2026

Property: AstoriaStyle: GardenUnit Count: 252ResponsibilitiesComplete assigned work orders generated from residents requests for service, as well as routine upkeep on the property by diagnosing the source or cause of the defect or problem, and making the repairs in accordance with established policies, procedures, safety standards, and code requirements.Complete make-ready process to prepare vacant apartment homes for leasing and new move-ins by completing the pre-move-out inspection, creating a Punch list of maintenance work needed, scheduling vendors and contractors as needed, obtaining needed supplies and materials, completing all maintenance tasks, and inspecting completed work.Follow procedures for accessing and obtaining materials, supplies, equipment, tools, and other items from the

Creola, AL 36525 • (36.3 miles) • Full Time • 9/25/2026

SUMMARY:Service/Repair Technician 3 possesses in depth knowledge and has demonstrated mechanical, electrical, pneumatic, gas, and/or refrigeration (HVACR) aptitude with complex troubleshooting experience. Responsible for providing on-site support to Hobart Service customers that includes but is not limited to: installation and/or service of commercial food equipment. Routine work schedule including on-call, after-hours, holiday, and weekend on-site repair support.ESSENTIAL DUTIES AND RESPONSIBILITIES FOR ALL TECHNICIAN LEVELS:These are the most significant job duties performed. The size, scope and complexity of assigned duties and responsibilities are dependent on the level and experience of the incumbent. To perform this job successfully, an individual must be able to perform each assigne

Mobile, AL 36602 • (23.4 miles) • Full Time • 9/22/2026

About the Role:The Instrument Man plays a critical role in supporting construction projects by providing precise and accurate surveying data essential for project planning and execution. This position involves operating advanced surveying instruments to establish reference points, grades, and elevations that guide trenching, pipeline construction, and other site activities. The Instrument Man ensures that all measurements comply with engineering specifications and regulatory standards, thereby minimizing errors and rework. Collaboration with surveyors, engineers, and construction crews is vital to maintain project timelines and quality. Ultimately, the Instrument Man contributes to the successful completion of construction projects by delivering reliable data that underpins safe and effici

Theodore, AL 36582 • (9.5 miles) • Full Time • 9/21/2026

Flotech is a subsidiary of FloWorks International LLC, which is a privately held company located in Pasadena, Texas.As a Valve Technician you are responsible for performing maintenance, assessment, repair and testing on various types of industrial valves. This position has no supervisory responsibilities.Responsible for repair and testing of various valves, including but not limited to ball valves, gate valves, butterfly valves, safety relief valves, etc.Perform disassembly, cleaning, inspection, measuring, reassembly and testing of valves at Flotech facilities and client locations.Follow all schematics and documented procedures in accordance with all Quality Control and ASME National Board standards that apply to the job.Thoroughly complete all calibration and documentation associated wit

Mobile, AL 36602-1327 • (20.9 miles) • Full Time • 9/17/2026

We are currently searching for an experienced Maintenance Technician for our portfolio in Mobile, AL at our amazing community, Elevate 758.Elevate 758 is a distinctivehigh-rise apartment community in Mobile, Alabama, offering residents an elevated urban living experience with convenient access to the city’s shopping, dining, entertainment, and major employment areas. The community combines a unique high-rise setting with modern apartment living and amenities, making it a standout property in the Mobile market.Technicians here take pride in keeping a property that looks great, functions smoothly, and gives residents a bestinclass living experience. It’s a place where your work is visible, appreciated, and supported by a management team that values professionalism, teamwork, and proactive ca

Robertsdale, AL 36567 • (39.7 miles) • Full Time • 9/5/2026

Description: NOW HIRING AN PART TIME AUTOMOTIVE / SMALL ENGINE REPAIR MECHANIC FOR AN IMMEDIATE PART-TIME JOB OPPORTUNITY!STARTING PAY OF $20.00+ PER HOUR BASED ON EXPERIENCE!Turf Doctors is hiring a Automotive / Small Engine Repair Mechanic to join our team! This position focuses on diagnosing, repairing, and maintaining our fleet of vehicles. As an Automotive / Small Engine Repair Mechanic, you will troubleshoot hydraulic, electrical, and engine systems, ensuring all equipment operates safely and efficiently.Responsibilities:Inspect, diagnose, and repairPerform preventive maintenance on vehicles and enginesTroubleshoot mechanical and electrical issuesMaintain detailed service records and follow safety protocolsRequirements: High school diploma or GED (technical training or certification

Creola, AL 36525 • (36.3 miles) • Full Time • 9/27/2026

We are representing a multi-disciplined, Mechanical/Electrical Consulting Engineering firm in the Pensacola and Mobile areas. Our client is searching for an Electrical Engineer Designer.The Electrical Engineer/Designer shall meet the following minimum requirements:Minimum of 3 years electrical engineering or drafting and design experience at an MEP Engineering firm or A-E firm.BS degree in Electrical Engineering or AS degree in Drafting and Design.Proficient using REVIT software.Relevant experience with planning, design and construction management services to the public, military, institutional and private commercial sectors.U.S. Citizen or Permanent Resident of the U.S.

Fairhope, AL 36532 • (19.4 miles) • Full Time • 9/25/2026

Cardiology Associates is seeking an experienced Test Scheduler to join our growing outpatient cardiology practice in Fairhope, Alabama. The ideal candidate will have strong scheduling, insurance authorization, and referral experience and be comfortable working in a fast-paced medical office environment.This position plays an important role in coordinating patient care by scheduling diagnostic testing, obtaining prior authorizations, and communicating with patients, providers, and insurance companies.This is a full-time, day shift position withno weekends and paid holidays off.Schedule & BenefitsMonday–FridayDay shift onlyNo weekendsPaid holidaysHealth insuranceDental insurancePaid time offPaid sick leave401(k) with company matchLife insuranceAD&D insuranceFlexible spending account (FSA)Fre

Moss Point, MS 39562 • (22.5 miles) • Full Time • 9/26/2026

Job Title: Mechanical DesignerJob DescriptionA Mechanical Designer with 5 to 10 years of experience as a P&ID Developer is responsible for creating, updating, and maintaining Piping and Instrumentation Diagrams (P&IDs) that illustrate the flow of fluids, control systems, and equipment in industrial processes. They work closely with engineering teams to ensure the safe and efficient operation of complex systems.ResponsibilitiesCreate and update P&IDs using industry-standard software, such as AutoCAD, to accurately represent the layout and functionality of piping, equipment, and instrumentation in industrial processes.Work closely with mechanical engineers, process engineers, and other stakeholders to understand the requirements for P&IDs and ensure that they meet design specifications.Gener