Huntsville, AL 35805 • (12.1 miles) • Full Time • 10/15/2026

As a Radar Technician, you will be responsible for the assembly, installation, maintenance, testing and repair of weather radar equipment and subassembly components used in forecasting and monitoring of weather. Also, as part of your role you will be required to travel both domestically and internationally to provide support for weather radars installed worldwide.Primary Responsibilities:Install, calibrate, and maintain weather radar equipment and subassemblies including radar transmitters, receivers, antennas, cabling and control systems.Diagnose and resolve issues pertaining to weather radar systems using advanced testing equipment, hand tools and other specialized equipment.Assemble and construct radar systems, subassemblies, cable assemblies, and components following documentation and

Huntsville, AL 35805 • (12.1 miles) • Full Time • 10/15/2026

USRA and the Science and Technology Institute are seeking a full-time Mechanical Engineer to work in our Huntsville, AL office. The Mechanical Engineer will design, fabricate, assemble, and test machines and instruments that will be used for X-ray optics fabrication, calibration, and metrology. The successful candidate will collaborate closely with NASA Marshall Space Flight Center’s (MSFC) X-ray Astronomy Group to perform this work. This work directly supports the development of next generation X-ray optics for future NASA missions.Specific Responsibilities:Machine Design and Fabrication:Support development of machines and instruments that will be used to fabricate, measure and calibrate X-ray optics.Support development of fixtures and other hardware used for the fabrication and testing o

Huntsville, AL 35805 • (12.1 miles) • Full Time • 10/15/2026

FMS Aerospace is currently seeking an experienced full-time Mid to Senior Level Test Instrumentation Engineer for our Huntsville office location. This position will support the design, development, integration, and implementation of data acquisition systems, instrumentation, and associated sensors. The successful candidate will be responsible for collaborating with various engineering disciplines to define each program’s instrumentation requirements, as well as develop/modify/maintain data acquisition system hardware and software, support instrumentation planning, installation, and required calibrations.Job ResponsibilitiesBe responsible for specification, selection, design, integration, operation and maintenance of aircraft data acquisition systems, and their related componentsCollaborate

Huntsville, AL 35806 • (16.6 miles) • Full Time • 10/15/2026

nou Systems, Inc. (nSI) is now officially a 100% ESOP company! We value teamwork and collaboration, and this transition allows us to take that commitment to a new level. nSI empowers our customers by supplying products, services, and expertisewith powerful, data driven insights that transform defense systems and improve capabilities.nou Systems, Inc. (nSI) is building systems that solve our nation's most challenging defense problems in an enjoyable, stimulating environment. We’re known for fielding revolutionary missile defense systems, pioneering step changes in RF seeker technology, introducing principled AI systems, and rapidly pioneering novel defense platforms, from space to the seabed. We're looking for talented builders with high levels of curiosity and extremely strong grounding in

Decatur, AL 35601 • (23.5 miles) • Full Time • 10/15/2026

Job Title:Quality EngineerFLSA Status:ExemptPosition Overview:TheQuality Engineeris responsible for applying engineering principles and quality methodologies to improve product quality, manufacturing processes, and overall operational performance. This position serves as a technical resource to the Quality, Engineering, Production, and other departments by investigating quality issues, identifying root causes, developing sustainable corrective actions, and implementing process improvements.The Quality Engineer will focus on preventing defects, reducing process variation, solving recurring quality problems, and improving manufacturing processes rather than solely identifying defects after they occur.This position requires a strong understanding of manufacturing processes, engineering princi

Huntsville, AL • (11.6 miles) • Full Time • 10/14/2026

We are partnering with a rapidly growing precision manufacturer serving the aerospace, defense, medical device, and other high-precision industries to hireQuality Inspectors.This role is responsible for inspecting complex precision-machined components throughout the manufacturing process to ensure they meet engineering specifications and customer quality standards. You'll work closely with machining, engineering, and quality teams in a fast-paced, high-mix manufacturing environment.Shifts: Hiring 1st and 2nd shiftCompensation: $28–40/hr(depending on experience)What You'll Be Working With:Wenzel CMM SystemsKeyence Laser Inspection TechnologyPrecision hand inspection equipmentHermle, Heller, Zayer, and DN Solutions machining centersSiemens Sinumerik & Heidenhain controlsResponsibilities: Per

Madison, AL 35758 • (14.8 miles) • Full Time • 10/14/2026

GIG South / Generation Industrial & GovernmentThis position is not eligible for recruiting or sourcing by outside parties.Disclaimer: Be cautious and only respond to emails from our “mesainc.com” domain. We will never ask for sensitive information, such as bank account details, SSN, etc., via email. If you receive any communication asking for such information, it is not from Mesa. For any concerns, or to verify the authenticity of a message, please contact us through our official channels.We’ve got the power to energize Your career and spark YOUR Work/Life Balance through professional development and exceptional benefits. Don’t delay, plug in today for an inclusive meaningful career in power, distribution, transmission, engineering, design, technology, or innovation at Mesa Associates, Inc

Madison, AL 35758 • (14.8 miles) • Full Time • 10/14/2026

Griffon Aerospace, a leader in the exciting Unmanned Aerial System industry, is seeking a Fabrication Technician (Welder & Fabricator) to fabricate and assemble custom metal products. The growing Madison, AL based small business is seeking innovative individuals who want to join an up tempo, maker culture that proudly provides products and services to support the American Warfighter!DESIRED SKILLS/EXPERIENCEPrevious machining experiencePrevious forklift operation experienceCAD experience (SolidWorks or similar)REQUIRED SKILLS/EXPERIENCEMust be able to run & operate a CNC plasma cutting machinePrevious experience with MIG, TIG, and Arc welding on multiple alloys of aluminum and steelAbility to read engineering drawingsAbility to pass forklift operation trainingPrevious experience with hand

Decatur, AL 35601 • (23.5 miles) • Full Time • 10/13/2026

Description: Morin Repair Service is seeking an experienced Manual Machinist to join our team. The ideal candidate will have a strong background in an industrial setting working with tools such as lathes, mills, and drill presses. Morin has been recognized as superior in equipment sales, distribution, repair, and service. This is your chance to become a part of a hard working, dedicated team!Under minimal supervision, sets up and operate manual machine shop equipment such as engine lathes, mills and drill presses in skilled precision and bench work in the manufacturing of parts and fabrication, maintenance, repair and alteration of machinery, machine parts, tools and equipment.ESSENTIAL DUTIES AND RESPONSIBILITIES (include the following, however, other duties may apply.)Performs all tasks

Huntsville, AL • (11.6 miles) • Full Time • 10/12/2026

Key Responsibilities:Read and interpret blueprints, schematics, and technical manuals for machinery installation, maintenance, and repairTroubleshoot and repair mechanical, hydraulic, and pneumatic systemsSafely operate hand tools, power tools, welding equipment, and machining toolsPerform routine maintenance, including equipment alignment, calibration, and inspectionsAssist with machinery setup, breakdowns, and relocations as neededCollaborate with team members and other departments to complete projects on scheduleWork flexible hours, including overtime, some Saturdays, and occasional holidaysQualifications:Completion of a recognized Millwright apprenticeship program or equivalent hands-on experienceStrong ability to read and interpret blueprints, schematics, and technical documentationSo

Huntsville, AL • (11.6 miles) • Full Time • 10/12/2026

Position Title:SeniorOpto-MechanicalEngineerLocation: Huntsville, AlabamaJob Type: Full TimeAbout EO SolutionsEO Solutions is a rapidly growing aerospace and defense company focused on advancing capabilities in Space Domain Awareness and Directed Energy Systems. Our teams work across Hawaii, Nevada, Alabama, and remote locations to solve critical national security challenges with innovative, mission-focused technologies.PositionOverviewEO Solutions isseekinga highly skilled Senior Opto-Mechanical Engineer to lead the architecture development, design, integration, and testing of advanced opto-mechanical hardware for High Energy Laser (HEL) weapon systems and related defense applications.This position will play a critical role in developing precision optical and mechanical assemblies that su

Madison, AL 35758 • (14.8 miles) • Full Time • 10/12/2026

GENERAL DESCRIPTIONCandidate will produce parts using standard machining processes.DUTIESCalculate dimensions and tolerances and have significant knowledge of mathematics and precision measurement instruments.Fabricate assemblies or subassemblies using machine tools such as saws, lathes, and milling machines.Makes setup decision relative to part, product and material being used.Measure and examine completed products to ensure they meet drawing and customer requirements.Make adjustments and setup changes of a minor nature on basic machine tools and equipment.Align and secure fixtures, cutting tools, attachments and materials onto machines.Monitor the feed and speed of machines during the machining process and make necessary adjustments to ensure proper machine performance.Evaluate the machi

Falkville, AL 35622 • (21.1 miles) • Full Time • 10/12/2026

Job Title: Press OperatorAre you searching for Stability, Growth Opportunities, and a Teamwork Environment?We are looking for individuals to grow with us, help fortify our Extreme Ownership mentality and go home each day proud of their meaningful contribution.We are a company that invests in YOU!GRT Rubber offers exciting career opportunities with competitive compensation and benefits packages including:Vacation Time12 Paid HolidaysHealth, Dental, & Vision InsuranceMatching 401KLife & Disability InsurancePaid Referral ProgramJob Goal: A Press Operator reads schematics, performs basic manufacturing math, ensures quality and uses technical/ mechanical skills. This position performs typical press operations to support the production floor.Duties & Responsibilities: Completing setup and breakd

Huntsville, AL 35805 • (12.1 miles) • Full Time • 10/11/2026

QTEC Aerospace is seeking a ROTARY-WING MAINTENANCE & READINESS ANALYSTto join our team of professionals in Huntsville, AL. The qualified applicant will become part of a team of professionals representing both industry and government. The successful candidate will be detail oriented, have a proven track record and a positive work ethic.Job SummaryQTEC Aerospace is seeking an experienced RotaryWing Aviation Maintainer with strong dataanalysis skills to support Condition Based Maintenance Plus (CBM+) and Health & Usage Monitoring System (HUMS) efforts for military aircraft. The successful candidate pairs deep handson maintenance expertise with the ability to interpret aircraft health, reliability, and readiness data to drive actionable recommendations. The ideal candidate would be a former s

Huntsville, AL 35816 • (14.2 miles) • Full Time • 10/11/2026

Senior RF Communications Engineer$140,000-$175,000 Base SalarySigning Bonus • Equity • Relocation AssistanceHybrid | Huntsville, AL | Full-Time | 9/80 ScheduleThis isn't another defense contractor job.Join a mission-focused engineering team developing next-generation RF communications and Electronic Warfare capabilities for national defense. This role is centered on the hands-on development of operational RF communications systems, including waveforms, signal processing, SDR implementation, system integration, and performance in challenged or contested RF environments. Work across SDR, radar, resilient networking, secure communications, and RF sensing technologies while contributing directly to systems from design through integration, testing, and field demonstration.Why experienced engine

Huntsville, AL 35806 • (16.6 miles) • Full Time • 10/11/2026

RF/Radar Engineer – Mid LevelLocation: Huntsville, AL; Denver, COClearance: Active Top Secret/SCIPosition Type: Full-TimeAbout the RolePhased n Research is seeking multiple mid-level RF/Radar Engineers to support radar engineering analysis and production of technically defensible threat-system parametrics for U.S. Air Force intelligence and mission-planning applications. The engineers will perform radar analysis, physics-based modeling, engineering derivation, and technical validation while helping translate proven radar engineering methods into repeatable, AI-assisted analytic workflows.You will work with senior engineers, intelligence analysts, and software developers on physics-based radar modeling and simulation (M&S), engineering analysis, algorithm application and validation, and aut

Athens, AL 35611 • (31.6 miles) • Full Time • 10/11/2026

About the Role:The Quality Assurance Inspector (2nd Shift) plays a critical role in ensuring that all manufactured products meet stringent quality standards before reaching customers. This position involves conducting detailed inspections and tests on materials, components, and finished products to identify defects or deviations from specifications. The inspector collaborates closely with production teams to address quality issues promptly and implements corrective actions to prevent recurrence. By maintaining accurate records and reporting findings, the inspector supports continuous improvement initiatives and compliance with industry regulations. Ultimately, this role helps uphold the company’s reputation for delivering reliable, high-quality products while minimizing waste and rework.Mi

Decatur, AL 35601 • (23.5 miles) • Full Time • 10/10/2026

Karman Space & Defense is a leader in the rapid design, development, and production of critical, next-generation system solutions that align with the U.S. Department of War and its allies’ core mission priorities, and meet the accelerating demand for access to space. Building on nearly 50 years of success, we deliver Payload & Protection Systems, Aero/Hydrodynamic Interstage Systems, and Propulsion & Launch Systems to more than 80 prime contractors supporting over 130 space and defense programs.The Senior Manufacturing Engineer plays a central role in ensuring producibility, process robustness, and continuous improvement throughout the product lifecycle. This role leads design-for-manufacturability efforts, develops and validates manufacturing processes, and supports production teams by so

Huntsville, AL 35824 • (11.3 miles) • Full Time • 10/10/2026

Job Title: Manufacturing Engineer III Location: Huntsville, AL Compensation: $72 per hour Type: Contract (6-month assignment) As a Manufacturing Engineer, you will translate engineering intent, drawings, and configurations into operational steps and processes to produce fully functional hardware at scale. Responsibilities include supporting builds, translating engineering definitions into manufacturing work instructions, and developing/qualifying new technology. Successful candidates will lead DFMA studies to strengthen the feedback loop between design, build, and test, accelerating product development.Responsibilities • Define how to prepare hardware for test, qualification, and flight. • Translate engineering intent, drawings, and configurations into fully functional hardware. • Identify

Huntsville, AL 35806 • (16.6 miles) • Full Time • 10/10/2026

Job Title: Process Quality EngineerCompany: X-Bow SystemsLocation: Huntsville, AL (on-site)Position Type: Full-Time---About the RoleAs a Process Quality Engineer, you will ensure that incoming and outgoing materials, components, and products meet required quality standards, specifications, and compliance requirements, aligning with organizational and customer expectations. This role requires an independent, self-motivated, and highly skilled engineer with extensive knowledge of Quality and Configuration Management to oversee products with minimal guidance, often on accelerated timelines. The position is on-site at X-Bow's Huntsville, AL facility, with some travel (20%).---Key ResponsibilitiesQuality Requirements and Standards· Define and implement receiving inspection and inventory managem

Huntsville, AL 35805 • (12.1 miles) • Full Time • 10/10/2026

We're seeking aSenior Electrical Design Engineer to join our client's R&D team.This is a hands-on hardware design role focused on developing next-generation connectivity technologies. You’ll work with a talented team of electrical, hardware, software, and systems engineers to take new technologies from concept through development.The company is looking for an experienced electrical design engineer with strongembedded power electronics and PCB design experience. The right engineer will have the technical foundation and aptitude to learn the exact technology.What You'll Do Design and develop embedded electrical hardware, including power electronics, PCBs, and circuit-level systems.Work closely with hardware, software, and systems engineering teamsPerform circuit simulation, modeling, testing

Huntsville, AL 35806 • (16.6 miles) • Full Time • 10/10/2026

Microfluidics Fabrication SpecialistLocation: Huntsville, ALPosition OverviewSynVivo Inc. is seeking a hands-on Microfluidics Fabrication Specialist to support the production, assembly, testing, and shipment of SynVivo's microfluidic organ-on-chip devices and related instrumentation.This position is focused primarily on fabrication and production rather than research. The ideal candidate is detail-oriented, mechanically inclined, dependable, and enjoys building things and solving practical problems. The successful candidate will work with small-scale components and materials, operate fabrication and laboratory equipment, follow established production procedures, troubleshoot devices and equipment, maintain accurate records, and ensure products meet quality standards before shipment to cust

Huntsville, AL 35808 • (7.4 miles) • Full Time • 10/9/2026

Mid-Level Radar/Signal Processing AnalystLocation: Huntsville, AL | Onsite Clearance Required: Minimum TS/SCI Clearence Employment Type: Full-TimeJoin a Growing Team at Weeghman & BriggsWeeghman & Briggs is seeking a motivated and mission-driven Mid-Level Radar/Signal Processing Analyst to support critical government initiatives in Huntsville, AL.Founded in 2016 by Anthony Jordan, Weeghman & Briggs specializes in delivering high-impact analytical services to Government Agencies and private organizations. Since our founding, we have partnered with a range of federal entities and private corporations, earning a strong reputation as a trusted, results-driven company with an exceptional team of professionals.As we continue to expand across current programs and upcoming contract awards, we are

Huntsville, AL 35805 • (12.1 miles) • Full Time • 10/9/2026

Position SummaryEthic Tech, LLC is seeking an Electronic Security Quality Control (QC) Manager to oversee the testing, inspection, and compliance of electronic security systems-such as access control, video surveillance, and alarm systems-to ensure installations meet strict quality and contract standards.Essential Duties and ResponsibilitiesQuality Program Management: Develop and implement Quality Control Plans (QCP) and procedures for the installation, testing, and maintenance of Electronic Security Systems (ESS).System Inspections: Conduct routine site inspections and internal audits to verify that work adheres to engineering drawings, technical specifications, and manufacturer guidelines.Compliance & Standards: Ensure adherence to commercial building codes, ISO standards, or federal/Dep

Madison, AL • (15.2 miles) • Full Time • 10/9/2026

Job Summary:The Assembly Engineer (Intermediate Level) is a hands-on position responsible for supporting projects from initiation through completion, including fabrication, assembly, programming, testing, customer inspections, and on-site installations. This role performs CNC milling and drilling operations and utilizes a variety of manual fabrication equipment, including lathes, welding equipment, band saws, drill presses, manual milling machines, and cutting tools to fabricate and modify components.The Assembly Engineer programs CNC machines, sets up tooling and fixtures, and builds mechanical assemblies from 2D blueprints and 3D CAD models. In addition to mechanical assembly, this role installs and routes electrical wiring, control cables, and instrumentation in accordance with electric

Decatur, AL • (22.2 miles) • Full Time • 10/9/2026

Experience (required and preferred):· At least 3-10yrs experience working in an engineering role in a plant· Project management experience in an industrial environment· Maintenance troubleshooting experience in an industrial environment· Solid grasp of engineering fundamentals relating to mechanical design & systems· Demonstrated experience with trouble shooting industrial equipment, pneumatic systems, hydraulic systems, HVAC systems· Experience working on load cells systems, PLC’s, NG fired burner systems· Preventative & predictive maintenance principles and systems· Tire Cord and/or Carpet Manufacturing processes (Not required)· Experience with industrial Safety systems (OSHA 1910)Essential Functions· Support and drive plantwide predictive maintenance programs· Support and manage capital

Huntsville, AL 35898 • (7.1 miles) • Full Time • 10/8/2026

OverviewElectrical Engineer IVLOCATION:Redstone Arsenal, Huntsville, ALJOB STATUS:Full-timeCLEARANCE: Ability to Obtain SecretCERTIFICATION: NATRAVEL: 15%Astrion has an exciting opportunity for an Electrical Engineer IV for theRTC Test and Engineering Services (RTES)Contract supporting theArmy Division.REQUIRED QUALIFICATIONS / SKILLSMust possess a Bachelor's Degree in the designated technical area of specialization from an accredited* university and 9 years of combined engineering and technical experience, including 6 years of project experience; or a Master's Degree in the designated technical area of specialization from an accredited* university and 7 years of combined engineering and technical experience, including 4 years of project experience; or a PhD in Engineering in the appropria

Huntsville, AL • (11.6 miles) • Full Time • 10/8/2026

Position Title: Senior Electrical / Mechanical Engineer Location: Huntsville, AL Employment Type: Full-Time Salary Range: $132,000-$162,000 Position Summary: RPI Group, Inc. is looking for a Senior Electrical/Mechanical Engineer to support our U.S. Army customer at the U.S. Army Corps of Engineers (USACE) Engineering and Support Center in Huntsville, AL. The Senior Electrical/Mechanical Engineer will represent the company with engineering products and solutions. This position is contingent upon award of contract. Key Responsibilities:Perform engineering analysis, design, development, and technical problem-solving in support of customer requirements.Develop, review, and maintain engineering designs, drawings, specifications, calculations, and technical documentation.Support the design, deve

Huntsville, AL 35816 • (14.2 miles) • Full Time • 10/8/2026

DescriptionApplied Technology Solutions, Inc. (ATS) is seeking a talented Integrated Product Team (IPT) Lead to join a growing team of engineers, technicians, and scientists supporting a diverse customer set to solve a complex set of technical challenges. This position is based in Huntsville, Alabama. As a member of the team, a successful candidate will lead cross-functional technical efforts supporting defense and government programs while working closely with highly collaborative team members to:Lead integrated product teams across engineering, operations, quality, logistics, and other functional areasManage cost, schedule, and technical performance for assigned effortsPerform technical analysis to support system design, trade studies, risk reduction, and decision-makingCoordinate requir

Madison, AL 35756-8400 • (15.2 miles) • Full Time • 10/8/2026

Mechanical Engineer – Lead DesignerAt B&A, we foster and embrace a distinct set of values that we live by and instill in all aspects of our organization: dedication, commitment, partnership, trust, and recognition. We have incorporated these values into successful delivery for our customers since 1988. B&A believes in ensuring its employees feel deeply connected to B&A, recognizing successes and hard work, and providing continuous opportunities to learn and grow. Our people are entrepreneurial thinkers that combine mindset, vision, and experience to drive value – not only to us as an organization, but to the clients we support. We promote a collaborative culture with our clients, and with each other, as one team working towards a common vision. We’d love for you to join our team!Job Summar

Huntsville, AL 35806 • (16.6 miles) • Full Time • 10/7/2026

Electronics Engineering Technician, Mid-LevelOverviewSimTech, Inc., recognized as one of the 2026 Best Places for Working Parents, is seeking a to join our dynamic and diverse team in Huntsville, AL. This is an immediate opening with opportunities for growth and professional development.SimTech offers a market leading compensation package with excellent benefits, work/life balance, outstanding retirement plan, career advancement and much more.Responsibilities Perform highly skilled surfacemount and platedthroughhole hand soldering and rework.Interpret and work from schematics, diagrams, written or verbal instructions, and defined plans.Fabricate cables and breakout boxes in accordance with technical drawings.Utilize hand and power tools for the fabrication of breakout boxes.Produce highqua

Huntsville, AL 35808 • (7.4 miles) • Full Time • 10/7/2026

Senior Mechanical EngineerATI has a current need for a Senior Mechanical Engineer for complex, multimillion dollar construction projects. Work will be at Redstone Arsenal in Madison County, Alabama.Great Pay and Benefits for a Senior Mechanical EngineerCompetitive Salary of $120,000 - $140,000/year depending on qualifications and experience;11 annual paid holidays;Paid annual vacation and sick leave;Employee and family health, dental, prescription, and vision insurance with 75% of the premiums paid by the company;401(k) plan with 4% employer match vesting immediately;Employer paid short-term and long-term disability, and life insurance; andProfessional development assistance including memberships, professional licenses, and tuition reimbursements;Duties and ResponsibilitiesDuties may inclu

Huntsville, AL 35805 • (12.1 miles) • Full Time • 10/7/2026

MBDA Incorporated is seeking a Mechanical Design Engineer to support the development and design of mechanical systems. This position is ideal for an engineer who enjoys solving complex design challenges, producing high-quality technical documentation, and collaborating with a multidisciplinary team in a fast-paced environment.Principal ResponsibilitiesDevelop mechanical designs and supporting technical documentation.Prepare engineering studies, conceptual designs, layouts, and detailed drawings.Create and maintain interface control drawings and installation drawings.Develop control plans and other design-related documentation.Maintain accurate and organized CAD databases and design records.Collaborate with engineering, manufacturing, quality, program management, and other functional teams.

Madison, AL 35756 • (14.4 miles) • Full Time • 10/7/2026

Job Summary OMCO, a MacLean-Fogg Company is hiring a Quality Engineer for our Huntsville, Alabama manufacturing operation. In this role, you will help establish and maintain quality standards, resolve product and process quality issues, support PPAP activities, and partner across engineering, manufacturing, and supply chain teams to improve quality throughout the product lifecycle.Location: Huntsville, ALWork Arrangement: On-siteSchedule: 1st ShiftPay: $85,000–$95,000 USD/yearEmployment Type: Full-time / SalaryWhat You'll Do as a Quality Engineer Establish and maintain quality standards for products, processes, and systems, recommending improvements that strengthen product quality and prevent defects.Partner with product design, product management, production, manufacturing, and supply cha

Decatur, AL • (22.2 miles) • Full Time • 10/6/2026

Commercial CoordinatorExpert Technical Solutions is seeking ahighly qualifiedCommercial Coordinatorforone of our premier, industry leadingclients inDecatur, AL 35601.This position reports directly to the Director of Sales and serves as their right hand on day-to-dayadministrative and commercial work.This person willprovideexecutive administrative support to the Director ofSales, preparesales and pipeline reporting, and tracknew products and new customers as theymove through onboarding from RFQ through first shipment coordinating between Sales,Customer Service, Production, Engineering, Quality, Planning, and Shipping along the way. This is aPermanent, ONSITEopportunitythat offers excellent pay, strong benefits, and extensive growth potential.Duties and ResponsibilitiesProvide executive admi

Huntsville, AL 35808 • (7.4 miles) • Full Time • 10/5/2026

Description: TriVector Services, Inc. provides quality aerospace engineering solutions to complex problems through a renowned team of engineering professionals. We are a Service-Disabled, Veteran-Owned, SBA-certified Small Business headquartered in Huntsville, Alabama. Our experienced team is dedicated to building lasting partnerships based on professional integrity and sound engineering principles. TriVector's Experience and exceptional Performance adds measurable Value to every project. TriVector Services, Inc., is seeking qualified candidates to fill our Production Control Specialist I position.This position compiles and records production data for the Production Control Specialists review. Responsibilities include, but are not limited to:Compile and record production data from customer

Huntsville, AL 35805 • (12.1 miles) • Full Time • 10/5/2026

DESE Research, Inc. is seeking mid-level and senior Mechanical and Tooling Design Engineers with space hardware experience to support aerospace vehicle programs in a fast-paced, customer-facing environment. This role requires hands-on proficiency in PTC Creo and Windchill PLM, strong mechanical design skills, and the ability to work independently. If you've designed or supported tooling and hardware for space programs and want to improve your CAD and PLM skills on real flight and ground support equipment, we encourage you to apply!Job Details:You'll support the design, development, and documentation of tooling for manufacturing, ground support, and test operations on space hardware programs, working directly with our customer's engineering team. Day-to-day, you'll generate and redline 2D d

Huntsville, AL 35808 • (7.4 miles) • Full Time • 10/5/2026

Multiple positions. The Quality Engineer will support work associated with the Marshall Space Flight Center (MSFC) SMASS II contract located in Huntsville, ALRESPONSIBILITIES:Technical responsibility for interpreting, organizing, and coordinating assignments; plans and developing S&MA engineering and assurance activity that may have an important effect on major programs.Prepare, evaluate and provide assessments of in-house and contracted quality related processes, procedures and manufacturing activities including implementation of procedures. Specifically with contractor manufacturing systems.Perform reviews and assessments of QA/QE documentation for compliance with NASA policy, Marshall Management System (MMS), Safety and Mission Assurance (S&MA) directorate organizational instructions an

Huntsville, AL 35802 • (10.1 miles) • Full Time • 10/5/2026

MDR is looking for an amazingly talented Principal GNC & Trajectory Analyst to join our team! In this role you will provide technical and advisory assistance to Targets Program Office by aiding in the refinement and implementation of Target trajectories in support of the agencies flight test events to validate the weapon and system sensors.What You'll Be Doing:Support the Missile Defense Agency (MDA) Directorate for Test (DT) Targets program office with development of missile defense target vehiclesSupport the Targets System Engineering team in all aspects of target design, analysis, and test to include requirements development and assessment, modeling and simulation, test analysis and reportingUtilize knowledge, skills and experience with missile characteristics (physical, kinematics, sig

Huntsville, AL 35806-2183 • (11.6 miles) • Full Time • 10/5/2026

Description: What You'll Be Doing:Support the Missile Defense Agency (MDA) Directorate for Test (DT) Targets program office with development of missile defense target vehiclesSupport the Targets System Engineering team in all aspects of target design, analysis, and test to include requirements development and assessment, modeling and simulation, test analysis and reportingUtilize knowledge, skills and experience with missile characteristics (physical, kinematics, signatures) and engineering to support engineering activities and data product developmentTechnical focus areas include Guidance Navigation and Control (GNC), Modeling and Simulation (M&S), and vehicle performance assessmentsGenerate and analyze target vehicle 6-DoF and 3-DoF trajectory data using industry standard (e.g., TAOS) an

Huntsville, AL 35805 • (12.1 miles) • Full Time • 10/5/2026

Mechanical Design EngineerAt ReLogic Research, you won’t be just another headcount. We’re a tight-knit team of engineers, physicists, and technical professionals solving complex challenges in national defense and we’re looking for engineers who enjoy building real hardware and getting the details right.As an AS9100D-certified small business supporting the Army, Navy, Air Force, and Missile Defense Agency, we move fast, trust our people, and give engineers meaningful ownership of their work. Unlike larger organizations, our engineers work directly across design, build, integration, and technical problem-solving.This role is ideal for engineers who enjoy designing and maturing real hardware in CAD, solving practical mechanical problems, and working closely with fabrication, assembly, and int