Athens, AL 35611 • (11.4 miles) • Full Time • 10/6/2026

Essential Duties and Responsibilities:•Work from drawings, models, charts, or specifications, use measurement instruments to check and verify own work and work of others as required.•Perform CMM best practices with both machine operation and quality inspection methods.•Perform surface plate layout and inspection using conventional measurement equipment as required for production or operational needs.•Operate and run Vision/Touch and Scanning Probe systems.•Interpret blueprints and specifications related to geometric tolerancing, gauging, statistical requirements, control plans and other customer/internal requirements.•Willingness to learn new technologies and machine/equipment applications•Assist with corrective and preventative actions as required.•Consistently meet or exceed productivity

Huntsville, AL 35808 • (24.3 miles) • Full Time • 10/6/2026

Benefits:Gap InsuranceEmployee discounts401(k)Bonus based on performanceCompetitive salaryDental insuranceHealth insuranceOpportunity for advancementPaid time offVision insuranceJunior Electrical Engineer – Hardware DesignLocation: Huntsville, AL Employment Type: Full-Time Clearance: Secret clearance or ability to obtain and maintain one Position Overview Created Solutions is seeking a Junior Electrical Engineer to support the development, integration, fabrication, and testing of advanced electronic hardware for defense applications. This position will focus primarily on printed circuit board (PCB) design and hardware development, supporting efforts from design modification and prototyping through fabrication, qualification testing, and field test activities. The successful candidate will

Huntsville, AL 35801 • (30.7 miles) • Full Time • 10/6/2026

Role overview Lead rapid, component-level rework and repair of circuit card assemblies (CCAs) and related subassemblies to rigorous aerospace and defense standards. Apply deep expertise with IPC and J-STD criteria to deliver reliable, high-quality outcomes while maintaining precise records and SPC data. Operate under general supervision and contribute to continuous improvement across products and processes. Core responsibilities Rapid rework and modification of CCAs per IPC and J-STD requirements.Execution of approved rework, repairs, and engineering changes on electrical, electronic, and mechanical systems.Use of detailed work instructions and released planning, supported by technical drawings, 2D/3D models, schematics, circuit/wiring diagrams, equipment/process specs, photos, illustrati

Decatur, AL 35601-6510 • (5.5 miles) • Full Time • 10/5/2026

Nos alegra que ests aqu. Pinsalo: t y nosotros? Parece que podramos ser una pareja perfecta en el paraso de la carne. Si ests aqu por:Papas fritas rizadas con descuento (y todos los artculos de nuestro men, de hecho)Horario flexibleComidas gratuitas por turno*La mejor capacitacin en su clase y aprendizaje continuoOportunidades de progresoTiempo libre remunerado*Plan de jubilacin 401(k)*Beneficios de matrcula*Mdico, dental y de la vista*Campeones de la esperanza*Programa de recomendacin de efectivoHerramienta de apoyo para el bienestar en el viajePrograma de descuentos PerkSpotPrograma de reconocimientoProgramas de calzado antideslizanteParticipacin comunitaria y caritativaPrograma de subvenciones Encendiendo sueosConcursos de entrenamientoBueno, ests en el lugar correcto. Tambin ests en el

Madison, AL 35758 • (20.6 miles) • Full Time • 10/5/2026

General DescriptionTyonek is dedicated to solving problems for current and future warfighters. We are seeking a motivated individual to take on the position of electrical engineer. You will hold a key role in our aircraft integration efforts. Using your electrical engineering expertise, you will design and develop the integration of avionics and weapons systems into multiple vehicle platforms for customers including US DoD, foreign military, and/or commercial entities. You may also be the technical lead for projects during both the design and test phases. Position level will be hired to match the experience of the candidate.DutiesA wide degree of creativity and latitude is encouraged.Develop system requirements, architecture and interfaces between new avionic or mission systems and legacy

Huntsville, AL 35808 • (24.3 miles) • Full Time • 10/5/2026

Description: TriVector Services, Inc. provides quality aerospace engineering solutions to complex problems through a renowned team of engineering professionals. We are a Service-Disabled, Veteran-Owned, SBA-certified Small Business headquartered in Huntsville, Alabama. Our experienced team is dedicated to building lasting partnerships based on professional integrity and sound engineering principles. TriVector's Experience and exceptional Performance adds measurable Value to every project. TriVector Services, Inc., is seeking qualified candidates to fill our Production Control Specialist I position.This position compiles and records production data for the Production Control Specialists review. Responsibilities include, but are not limited to:Compile and record production data from customer

Huntsville, AL 35808 • (24.3 miles) • Full Time • 10/5/2026

Mid-Level Guidance, Navigation & Control EngineerLocation: Huntsville, AL | Onsite Clearance Required: Minimum TS/SCI Clearence Employment Type: Full-TimeJoin a Growing Team at Weeghman & BriggsWeeghman & Briggs is seeking a motivated and mission-driven Mid-Level Guidance, Navigation & Control Engineer to support critical government initiatives in Huntsville, AL.Founded in 2016 by Anthony Jordan, Weeghman & Briggs specializes in delivering high-impact analytical services to Government Agencies and private organizations. Since our founding, we have partnered with a range of federal entities and private corporations, earning a strong reputation as a trusted, results-driven company with an exceptional team of professionals.As we continue to expand across current programs and upcoming contract

Huntsville, AL 35805 • (27.2 miles) • Full Time • 10/5/2026

DESE Research, Inc. is seeking mid-level and senior Mechanical and Tooling Design Engineers with space hardware experience to support aerospace vehicle programs in a fast-paced, customer-facing environment. This role requires hands-on proficiency in PTC Creo and Windchill PLM, strong mechanical design skills, and the ability to work independently. If you've designed or supported tooling and hardware for space programs and want to improve your CAD and PLM skills on real flight and ground support equipment, we encourage you to apply!Job Details:You'll support the design, development, and documentation of tooling for manufacturing, ground support, and test operations on space hardware programs, working directly with our customer's engineering team. Day-to-day, you'll generate and redline 2D d

Huntsville, AL 35824 • (19 miles) • Full Time • 10/5/2026

Manufacturing Engineer IIILocation: Huntsville, Alabama A-Shift (5:00AM to 3:30PM) Monday to Friday Compensation: starting at $72 per hour Contract / On-sitePosition OverviewAs a Manufacturing Engineer, you will translate engineering intent, drawings, and configurations into operational steps and processes to produce fully functional hardware at scale. Responsibilities include supporting builds, translating engineering definitions into manufacturing work instructions, and developing/qualifying new technology. Successful candidates will lead DFMA studies to strengthen the feedback loop between design, build, and test, accelerating product development.Responsibilities include:Define manufacturing processes and requirements to prepare hardware for test, qualification, and flight operations.Tr

Huntsville, AL 35808 • (24.3 miles) • Full Time • 10/5/2026

Multiple positions. The Quality Engineer will support work associated with the Marshall Space Flight Center (MSFC) SMASS II contract located in Huntsville, ALRESPONSIBILITIES:Technical responsibility for interpreting, organizing, and coordinating assignments; plans and developing S&MA engineering and assurance activity that may have an important effect on major programs.Prepare, evaluate and provide assessments of in-house and contracted quality related processes, procedures and manufacturing activities including implementation of procedures. Specifically with contractor manufacturing systems.Perform reviews and assessments of QA/QE documentation for compliance with NASA policy, Marshall Management System (MMS), Safety and Mission Assurance (S&MA) directorate organizational instructions an

Huntsville, AL 35806-2183 • (25.9 miles) • Full Time • 10/5/2026

Description: What You'll Be Doing:Support the Missile Defense Agency (MDA) Directorate for Test (DT) Targets program office with development of missile defense target vehiclesSupport the Targets System Engineering team in all aspects of target design, analysis, and test to include requirements development and assessment, modeling and simulation, test analysis and reportingUtilize knowledge, skills and experience with missile characteristics (physical, kinematics, signatures) and engineering to support engineering activities and data product developmentTechnical focus areas include Guidance Navigation and Control (GNC), Modeling and Simulation (M&S), and vehicle performance assessmentsGenerate and analyze target vehicle 6-DoF and 3-DoF trajectory data using industry standard (e.g., TAOS) an

Huntsville, AL 35805 • (27.2 miles) • Full Time • 10/5/2026

Mechanical Design EngineerAt ReLogic Research, you won’t be just another headcount. We’re a tight-knit team of engineers, physicists, and technical professionals solving complex challenges in national defense and we’re looking for engineers who enjoy building real hardware and getting the details right.As an AS9100D-certified small business supporting the Army, Navy, Air Force, and Missile Defense Agency, we move fast, trust our people, and give engineers meaningful ownership of their work. Unlike larger organizations, our engineers work directly across design, build, integration, and technical problem-solving.This role is ideal for engineers who enjoy designing and maturing real hardware in CAD, solving practical mechanical problems, and working closely with fabrication, assembly, and int

Huntsville, AL 35805 • (27.2 miles) • Full Time • 10/5/2026

FMS Aerospace is currently seeking a full-time Electrical Engineering Technicianfor our Huntsville office location. The successful candidate in an integral part of our production team and will be responsible for building assemblies within established timeframes and documenting specifications, ensuring that all work and components meet rigorous quality standards. The candidate shall be expected to display keen attention to detail, a willingness to learn, and support others in the shop throughout the company, both technically and as teammates. This position requires someone interested in avionics and electrical systems for various aircraft.ResponsibilitiesManufacturing and assembling cables and wire harnessesTesting and function-checking completed assembliesFilling out travelers and document

Huntsville, AL 35805 • (27.2 miles) • Full Time • 10/5/2026

Electrical Integration EngineerAre you seeking employment with a fast-growing small business who appreciates their employees? A company who believes in investing in people?JBS Solutions, Inc. is an engineering and technical logistics company in Huntsville, AL. As a company dedicated to serving the community, JBS offers the unique opportunity to enrich an underutilized area of Huntsville while growing your career through NASA and DoD contracts. From systems engineering and configuration management to technical logistics and mission operations, JBS works to solve our customers' hardest problems. With a competitive benefits package and personable work environment, JBS Solutions is the ideal company to take your career to the next level.JBS is excited to announce a new position. We are seeking

Huntsville, AL 35802 • (30.4 miles) • Full Time • 10/5/2026

MDR is looking for an amazingly talented Principal GNC & Trajectory Analyst to join our team! In this role you will provide technical and advisory assistance to Targets Program Office by aiding in the refinement and implementation of Target trajectories in support of the agencies flight test events to validate the weapon and system sensors.What You'll Be Doing:Support the Missile Defense Agency (MDA) Directorate for Test (DT) Targets program office with development of missile defense target vehiclesSupport the Targets System Engineering team in all aspects of target design, analysis, and test to include requirements development and assessment, modeling and simulation, test analysis and reportingUtilize knowledge, skills and experience with missile characteristics (physical, kinematics, sig

Huntsville, AL 35801 • (30.7 miles) • Full Time • 10/5/2026

Job SummaryStratagem Solutions, Incorporated is in search of applicants who are interested in satisfying a requirement to support a product manager with developing complex schedules utilizing Microsoft Project and Milestone Professional. Ideal candidates have recent and relevant experience gained from prior military/civilian/contractor scheduling support and are adept at briefing mid and senior staff personnel. This is a resume canvassing action and not an application for an immediate vacancy. SSI may not immediately contact candidates who apply to these positions follow up interview. SSI will retain resumes for consideration in future requirements.Responsibilities and DutiesPosition requirements:Develop and maintain Microsoft Project integrated master schedule for a complex program.Interf

Huntsville, AL 35801 • (30.7 miles) • Full Time • 10/5/2026

The CompanyEngeniusMicro is a hardware focused small business with offices in Huntsville, AL and in Atlanta, GA. Our multi-disciplinary staff of engineers, technicians, and scientists provide research and development engineering services to industry and the Federal Government. Our primary research areas are Additive Manufacturing, MicroElectroMechanical Systems (MEMS) / Nanotechnology, and Microelectronics. As a research-focused small business, we offer opportunities for growth and advancement for a motivated candidate.The CultureEngeniusMicro seeks self-motivated, highly organized, and responsive employees able to work in a fast-paced, small team environment. The ideal employee will thrive in a learning environment that encourages independence, initiative, leadership, and professional gro

Madison, AL 35756 • (15.1 miles) • Full Time • 10/4/2026

Paint Process Engineer DaikyoNishikawa USA, Inc.is a Tier 1 supplier for Mazda Toyota Manufacturing, located on Mazda Toyota’s campus in Madison, Alabama. We are looking for aPaint Process Engineerto join our team! This position requires an experienced professional with a comprehensive experience in paint processes who will be responsible for developing optimal Water-based Primer / Base Coat and 2K Clear Coat processes. Our ideal candidate exhibits a can-do attitude and approaches his or her work with vigor and determination. Candidates will be expected to demonstrate excellence in their respective fields, to possess the ability to learn quickly, and to strive for perfection within a fast-paced environment. REQUIREMENTS:Knowledge of Water-based Primer / Base Coat and 2K Clear Coat processe

Huntsville, AL 35824 • (19 miles) • Full Time • 10/4/2026

At Strata-G, we know it takes talented and dedicated people to deliver solutions for a greater cause, and we consider our employees to be our greatest asset. We are a growing, dynamic organization offering diverse challenges to innovative professionals.We are seeking a Senior Machinist to join our team. The Senior Machinist is responsible for advanced setup, programming, operation, troubleshooting, and optimization of CNC and manual machining equipment in a highprecision aerospace/defense manufacturing environment. This role requires expertlevel machining knowledge, strong blueprint interpretation skills, and the ability to independently execute complex machining operations with minimal supervision. The Senior Machinist also mentors junior machinists and supports continuous improvement ini

Huntsville, AL 35808 • (24.3 miles) • Full Time • 10/4/2026

Apply NowRTL, C/C++, Python, VHDL, Verilog, Tcl, cryptography, hardware, embedded software, System Integration, Hardware Security, Xilinx, Simulation, IP core, Versal, Stratix, concept to deployment, Vivado, GHDL, Questa, Quartus Prime, Zynq, Agilex, AXI, ACE, Avalon, FPGA verification tools,reverse engineering, cocotb, pyuvmFull TimeTravel required to 10%.Must be able to apply for and maintain a U.S. Government Security ClearanceFPGA EngineerThe EndoSec FPGA Engineer is responsible for the design, development, testing, and maintenance of IP cores and FPGA-based systems used in hardware security applications.Key ResponsibilitiesFPGA Design and Development: Design and develop IP cores and FPGA configurations implementing the latest in leakage-resilient hardware cryptography algorithms using

Huntsville, AL 35824 • (19 miles) • Full Time • 10/3/2026

SENIOR ELECTRICAL ENGINEER EOS Defense Systems USA is a trusted partner providing the most accurate Remote Weapon Systems for kinetic kill CUAS and ground-to-ground missions on all platforms.Be part of a company at the forefront of defense innovation. At EOS Defense Systems USA, we believe our people are our strength. We provide a safe and collaborative workplace where you can take on new challenges, build your skills and grow your career while contributing to the advancement of defense technology. THIS IS AN ON-SITE POSITION We are currently seeking a Senior Electrical Engineer with the following qualifications:Basic Qualifications:BA/BS Degree in Engineering, computer technology or related discipline or equivalent experience with more progressively challenging work requirements10+ Years

Huntsville, AL 35805 • (27.2 miles) • Full Time • 10/3/2026

This position requires that you must be a US Citizen for consideration and meet all Federal Contractor employee requirements. Nomad GCS does not support the H1B Visa for this position.Position:Mechanical Engineer lVDivision: Innovative Solutions GroupDepartment: Mechanical EngineeringStatus: Full-TimeNomad GCS is currently seeking a Level IV Mechanical Engineer. Please note the Level IV Expectation in red below.Overview: Nomad Global Communications Solutions is a leading provider of communication and response products serving a wide variety of customers. Our purpose is to be the solution when every minute matters. We seek a candidate that is self-inspired to learn and demonstrates a high degree of customer service while positively contributing to our team.Mechanical Engineers (ME) work is

Huntsville, AL 35806 • (25.4 miles) • Full Time • 10/3/2026

RGNext employees execute and report on theater and strategic offensive and defensive ballistic missile testing and support space situational awareness operations and experiments, using a wide array of highly sophisticated radar, telemetry and optical sensors to meet the needs of our nation in defending the United States and its interests.This overseas position is located on Kwajalein Atoll in the Marshall Islands. It is an accompanied position (eligible for dependents).What You Will Do:Performs maintenance and troubleshooting of the radar mechanical systems.Performs implementation of new integration projects for both. improvement and modernization (I&M) and operational and maintenance (O&M).Maintain maintenance schedules, spare parts, and equipment inventory.Performs management of preventi

Huntsville, AL 35806-2828 • (25.9 miles) • Full Time • 10/3/2026

Join Our Journey:At Amentum Space Exploration Division (ASED) your growth is our priority! That’s why we offer an array of exciting opportunities for your career development. From the transformative Team Lead Academy to education reimbursement, personalized mentoring, and engaging company-sponsored networking events, you have the power to shape your professional journey in a way that aligns with your aspirations.Find Your Community:At the heart of our thriving business are the incredible people who make it all possible. We celebrate a vibrant array of cultures, backgrounds, and experiences. Here, we foster an environment where everyoneemployees, clients, and partners alikeare treated with the dignity and respect they deserve.Prioritize Your Well-Being:Our extensive benefits package is desi

Huntsville, AL 35810 • (30.5 miles) • Full Time • 10/3/2026

Quadrus Corporation provides expert Multidisciplinary Engineering, Consulting, and Staff Augmentation to complex defense, space, and commercial projects. In business since 1995, we have served the US Army, NASA, school systems, nonprofits, and commercial customers with a solid track record of delivering requirements on time, on budget, and with zero defects.Job Description:Quadrus Corporation is seeking a motivated Mechanical or Aerospace Engineers, from newly graduated to 10 years' experience, to join our engineering team. This role is ideal for recent graduates or early-career professionals who want hands-on experience designing, analyzing, testing, and improving rocket propulsion components. You will work closely with senior engineers on real projects while developing foundational skill

Huntsville, AL 35803 • (32 miles) • Full Time • 10/3/2026

Join our mission for zerodefect parts From first cut to final inspection, your craftsmanship drives product quality. As our CNC Production Machining Technician, you’ll transform drawings and CAD data into precise components on Okuma and Mazak lathes and on Haas/Okuma VMCs. Whether you prefer days or nights, you’ll be part of a team that sweats the details and celebrates great process control. Your impact Own complete setups and operations on CNC mills and lathes to exact specifications.Translate engineering intent from blueprints and models into tooling, fixturing, and sequencing.Verify critical features with inprocess checks, ensuring tolerance and finish are achieved.Diagnose machining issues and perform routine maintenance to sustain uptime and accuracy.Capture process detailsoffsets, r

Athens, AL 35611 • (11.4 miles) • Full Time • 10/2/2026

Industrial Painter/Powder Coater Morgan Metals Inc – Athens, AL$15–$24 per hour | Full-Time | Overtime AvailableMorgan Metals Inc is seeking an experienced Industrial Painter to apply high-quality coatings to fabricated metal products. This position plays a critical role in ensuring durability, corrosion resistance, and product appearance.What We Offer:$15–$22 per hourMonday–Friday, 7:00 AM–3:45 PMOvertime opportunitiesBenefits: Health, Dental, Vision, Life, AD&D, Disability, PTO, Holidays, 401KKey Responsibilities:Prepare surfaces through sanding, cleaning, and maskingApply industrial paint and powder coatings to metal componentsApply powder coating using spray guns and powder booth systemsOperate curing ovens to ensure proper finish and durabilityMonitor spray equipment and maintain cons

Huntsville, AL 35898 • (24.6 miles) • Full Time • 10/2/2026

Junior System Mechanical EngineerSeabrook Solutions is seeking an entry-level Mechanical Engineer to provide Operations & Maintenance support to NASA facilities located at Marshall Space Flight Center (MSFC). MSFC facilities house a broad range of technical, program management and administrative functions that directly support NASA’s mission. Maintaining functionality while being highly adaptable to the ever-changing research and development environment is paramount to the success of the nation’s space exploration vision. Engineers work closely with operational units to assure efficiency and reliability in critical systems.Position Description:Technical experts and managers over system(s) maintaining a broad knowledge of related work issues, such as environmental and safety requirements, s

Huntsville, AL 35802 • (30.4 miles) • Full Time • 10/2/2026

Invariant Corporation is a small company with a highly qualified technical staff that takes pride in providing quality services to our customers. We offer a comprehensive benefits package including 401k, profit sharing, and health/dental insurance. We have the following position available in our Huntsville office:Electrical Engineer Intern27-006 Invariant Corporation is seeking an Intern with a knowledge of Electrical Engineering. The Interns role is to assist our team while working in a hands-on laboratory environment on a variety of technical projects related to microelectronics system design and analysis.Duties Include:A variety of electronic design, build, and testing tasks under the guidance of senior engineers in a dynamic environmentProgramming and interfacing with FPGA development

Decatur, AL 35601 • (4.2 miles) • Full Time • 10/2/2026

We have an opening for a Quality Lab Inspector position working at a manufacturing facility located in** Athens, AL**. This is an evaluation-to-hire opportunity with potential for full-time placement.Skills/QualificationsPrevious manufacturing quality inspection experience required.Experience using measurement tools including steel scale, digital caliper, digital micrometer, and torque wrench required.Knowledge of blueprint reading and GD&T tolerances required.Strong understanding of quality inspection processes and procedures.Quality Control Techniques such as SPC, Gage R&R, or Six Sigma is a plus.Experience using a Faro Portable CMM machine is a plus.Ability to inspect products and confirm specifications through dimensional measurements.Ability to identify and reject products that do not

Huntsville, AL 35824 • (19 miles) • Full Time • 10/2/2026

Production EngineerHuntsville, AL | Active Secret ClearanceYour expertise. Our nation's defense.At Banner Defense, you're more than a name on a contract. As a Service-Disabled Veteran-Owned Small Business, we know what it means to serve, and we build our team around people who take pride in protecting those who protect us. Here, your work directly supports the warfighter, your voice is heard, and your growth matters.THE OPPORTUNITYBanner Defense is in search of a detail-driven Production Engineer to support the Targets and Countermeasures team of the Missile Defense Agency (MDA). In this role, you will be directly responsible for verifying that critical missile flight hardware and propulsion systems are designed, fabricated, integrated, and tested strictly in accordance with baseline stand

Huntsville, AL 35806 • (25.4 miles) • Full Time • 10/2/2026

OWL is seeking a production and test technician to perform part kitting, assembly, and testing for commercial radar products. The candidate should be well-experienced in the assembly of electrical and mechanical products. Experienceor a willingness to learn aboutinventory control processes and part kitting is a must. The ideal candidate would also have experience performing testing on products and have at least basic electrical debugging skills.Responsibilities:Manage and pull part stock for the assembly of radar products.Assemble commercial radars and their subassemblies.Test assembled products to provided standards with defined test equipment.Use debug skills and basic electrical test equipment to identify some problems when assemblies fail tests.Organize working area and maintain manufa

Huntsville, AL • (25.9 miles) • Full Time • 10/2/2026

Why this role existsWe are building a facility for NASA, and NASA holds us to the highest quality standard in federal construction. We need a QC Manager who runs a program so disciplined that the government trusts it completely and never feels the need to send in its own inspectors. This is a single-duty role: quality is the entire job. When this project closes out, you will stay on as the dedicated QC Manager for our Huntsville office.What success looks likeNASA trusts your program. Your CQC plan is accepted, NASA relies on it without adding its own inspection layer, and every evaluation rates quality Very Good or better.Three-phase control, every time. Every definable feature of work gets a preparatory, initial, and follow-up inspection, documented and on file before the next phase start

Huntsville, AL 35805 • (27.2 miles) • Full Time • 10/2/2026

CONFIDENTIAL CLIENTAerospace & Defense CNC Machine Shop ManagerAre you a hands-on manufacturing leader who can drive operational productivity, ensure quality, and motivate a team of machinists and CNC programmers? If so, please apply!Captain Our Precision Manufacturing Shop Our confidential client is seeking an experienced Aerospace & Defense CNC Machine Shop Manager to lead a precision machining operation supporting aerospace, defense, and government customers. This hands-on leadership role is responsible for shop operations, CNC programming, production planning, estimating, quality compliance, and team performance in a fast-paced manufacturing environment. What You'll DoOpen Job Description for More DetailsManufacturing Operations & Leadership CNC Machining & Technical OversightProposal

Huntsville, AL • (25.9 miles) • Full Time • 10/1/2026

Team Members At CAVA, we make it deliciously simple to eat well and feel good every day. We are guided by a Mediterranean heritage that’s been perfecting how to eat and live for four thousand years. We prioritize authenticity, curiosity and the pursuit of excellence in everything we do. We are working towards something big, together.Wefoster a culture built on five core values:Generosity First, Always: We lead with kindness. Our best work happens when we act in service of others.Constant Curiosity: We are eager to learn, grow, and explore beyond the obvious.Act with Agility: We welcome change; it’s the only constant. We embrace, adjust, adapt.Passion for Positivity: We greet each day with warmth and possibility.Collective Ambition: We have high aspirations that are achieved when we work to

Huntsville, AL 35806 • (25.4 miles) • Full Time • 10/1/2026

nou Systems, Inc. (nSI) is now officially a 100% ESOP company! We value teamwork and collaboration, and this transition allows us to take that commitment to a new level. nSI empowers our customers by supplying products, services, and expertise with powerful, data driven insights that transform defense systems and improve capabilities.We are pleased to announce the opening for an RF Engineer, who will join our Advanced Sensing Area in-person in our Huntsville, Alabama office and become part of our rapidly growing technology company operating in missile defense, cybersecurity, test range modernization, biotechnology, and space control marketspaces. You will be part of a team known for turning research concepts into working prototypes quickly, staying hands-on from design through test.The RF

Huntsville, AL 35805 • (27.2 miles) • Full Time • 10/1/2026

Avion Solutions Inc., a 100% employee-owned company, is seeking candidates for a Production Engineer to support the Missile Defense Agency (MDA). This position is located in Huntsville, AL.Job Responsibilities/Duties:Audit prime contractor engineering designs, drawing packages, manufacturing processes, and assembly records to ensure end items are built strictly to approved baseline specifications and flight-worthiness requirements.Apply AIAA S-113 (and related space/launch vehicle standards) to assess ordnance, explosive devices, pyrotechnic separation mechanisms, pressure vessels, and mechanical/propulsion subsystems across all design and production phases.Participate in technical baseline reviews (SRR, PDR, CDR, MRR, FRR), ensuring objective evidence supports mission assurance criteria b

Trinity, AL 35673 • (3 miles) • Full Time • 9/30/2026

Come join an exciting and innovative company that puts the “care” back in healthcare!In office position working with Nursing Administration, Field Nurse support team, and providing infusion services to patients in the field and AISAt KabaFusion, our patients come from all walks of life and so do we. We hire GREAT people, period! Our culture celebrates and supports the differences that make us unique. Here, it doesn’t matter what your role is, your hard work and dedication is not only recognized but celebrated. Join us and find out why this is the place to excel and do your best work.About Us:What started as a single pharmacy in 2010 has grown into KabaFusion becoming the largest privately held home infusion company in the country. We have a national network of pharmacies and nursing office

Huntsville, AL • (25.9 miles) • Full Time • 9/30/2026

OverviewWe're hiring experienced CNC Machinists for an aerospace and defense manufacturer in Arab, Alabama.This is a high-mix, low-volume precision machining environment producing complex components for aerospace and defense applications. The shop runs a broad mix of Mazak, Haas, 3-axis, 4-axis, 5-axis, lathe, and large-format CNC equipment.This is not a machine operator position. You’ll be trusted to independently set up jobs, prove out programs, make machining adjustments, inspect your own work, and troubleshoot problems as they arise.Most work is short-run, with many jobs ranging from one-off parts to approximately 5–10 pieces. Machinists regularly change setups, move between different jobs, and take ownership of the machining process from setup through completed production.Why Join UsS

Madison, AL 35758 • (20.6 miles) • Full Time • 9/29/2026

Team Members At CAVA, we make it deliciously simple to eat well and feel good every day. We are guided by a Mediterranean heritage that’s been perfecting how to eat and live for four thousand years. We prioritize authenticity, curiosity and the pursuit of excellence in everything we do. We are working towards something big, together.Wefoster a culture built on five core values:Generosity First, Always: We lead with kindness. Our best work happens when we act in service of others.Constant Curiosity: We are eager to learn, grow, and explore beyond the obvious.Act with Agility: We welcome change; it’s the only constant. We embrace, adjust, adapt.Passion for Positivity: We greet each day with warmth and possibility.Collective Ambition: We have high aspirations that are achieved when we work to

Huntsville, AL 35808 • (24.3 miles) • Full Time • 9/29/2026

Description: T47 International is seeking a Quality Control Monitor / Trainer to support the Department of Homeland Security (DHS), Federal Protective Service (FPS) contract at Redstone Arsenal. This hybrid role is responsible for overseeing contract quality assurance programs while developing, administering, and maintaining training standards for armed security personnel.The Quality Control Monitor / Trainer serves as a key member of the management team by ensuring contractual compliance, operational readiness, personnel accountability, training effectiveness, and continuous improvement across the security workforce. Essential FunctionsQuality Control Responsibilities Monitor contractor performance against contract requirements and Statement of Work (SOW) standards.Conduct inspections of