Memphis, TN • (22.4 miles) • Full Time • 9/29/2026

As an Electrical Engineer at NKC of America, you'll be an integral part of a team that designs, develops, and improves electrical systems and components for our conveyor systems. Under general direction, the Electrical Engineer will conceptualize, construct, test, implement, and document control systems for various conveyor types, including Power and Free, Slat, Friction, and EMS systems.ESSENTIAL DUTIES AND RESPONSIBILITIESPrepare technical drawings, specifications of electrical systems, or topographical maps to ensure that installation and operations conform to standards and customer requirements.Operate computer-assisted engineering or design software or equipment to perform engineering tasks.Confer with engineers, customers, or others to discuss existing or potential engineering projec

Memphis, TN 38118 • (25.4 miles) • Full Time • 9/27/2026

Company: US0014 Sysco Memphis, LLCSales Territory: NoneZip Code: 38118Travel Percentage: 0COMPENSATION INFORMATION:The pay range provided is not indicative of Sysco’s actual pay range but is merely algorithmic and provided for generalized comparison. Factors that may be used to determine rate of pay include specific skills, work location, work experience and other individualized factorsPay: up to $32-$36.15 per hour, based on experience1st Shift availableAnnual Boot & Tool AllowanceOutstanding benefits: www.syscobenefits.comExcellent full-time career with a stable and growing companyMove your career FORWARD with Sysco Foods!JOB SUMMARY:This is an Operations position responsible for assisting in overseeing the safe operation, daily monitoring, and maintenance of large scale industrial compu

Olive Branch, MS 38654 • (33 miles) • Full Time • 9/27/2026

Job Summary:The primary responsibility of the Production Line Lead is to oversee the daily line activities within their department in order to achieve established production targets according to the standard operating procedures and guidelines by performing the following.Essential Job Functions (listing most important first):Set up and monitor production line to ensure that all components are connected correctly, operational and functioning within quality specifications; inspect to ensure that all tools, components, PPE, and needed materials are readily available to perform job tasks.Assign tasks, provide directives and instructions to employees to maximize quality and productivity.Constantly observe all aspects of the production line during production to quickly identify, troubleshoot, in

Memphis, TN 38118 • (25.4 miles) • Full Time • 9/26/2026

Job Summary: Pallet Repair technicians are responsible for sorting and repairing returned pallets. The technician must learn and memorize the PECO pallet specification and ensure that all pallets leaving his worktable meet it. Pallets that do not meet the specifications must be repaired.Essential Duties: Sortpalletsbyliftingthemonto the worktableandinspectingthemfrom the top, bottom, and sides.Replaceanydefectivecomponents on thepallet using the suppliedtools.Thesetools includePneumatic nailers, reciprocating saws, andangle grinders.Restocklumberandkeep the workstationcleanandorganizedthroughouttheday.Memorize pallet specifications and ensure all pallets processed meet those specifications.Cleanorreportanycontaminationorpotentialfoodsafetyissuesforcustomers.OtherdutiesasassignedLearn, und

Memphis, TN • (22.4 miles) • Full Time • 9/25/2026

This entry-level engineer is responsible for supporting production processes, learning manufacturing systems, and assisting with continuous improvement initiatives under close supervision. This position requires a combination of technical expertise, problem-solving skills, and the ability to work collaboratively across multiple departments. DUTIES / RESPONSIBILITIES Assist in developing and maintaining standard work instructionsSupport process troubleshooting on the production floorCollect and analyze basic production data (scrap, cycle time, downtime)Participate in Lean / Six Sigma projects (often as a team member)Help implement process improvements and cost reduction ideasSupport tooling, fixtures, and equipment setupEnsure compliance with safety and quality standardsWork with operators

Germantown, TN 38139 • (34.9 miles) • Full Time • 9/25/2026

Norsk Titanium is hiring for a Quality Systems Engineer at our Plattsburgh, NY additive manufacturing site! Who is Norsk Titanium? What do we do? If you haven't heard our name in passing before, you will soon. Norsk Titanium is pioneering a new era of on-demand metal additive manufacturing that will revolutionize the raw material supply chain. We are the world's first and only OEM qualified supplier of additively manufactured structural titanium components. However, our focus doesn't stop at the aerospace industry. Our unique RPD process may be applied in the defense, space, oil and gas, and industrial markets. Our team is small, but our goals are big. Norsk Titanium scientists, engineers, and employees around the world are truly responsible for the future of metal; You could be part of th

Collierville, TN 38017 • (40.8 miles) • Full Time • 9/20/2026

Manufacturing Process EngineerThe Manufacturing Process Engineer supports polyester and vinyl ester resin and gelcoat manufacturing operations by assisting with process improvements, employee training, safety initiatives, and production support activities. This role works closely with Production, Maintenance, Engineering, Quality Assurance, and Supply Chain teams to help ensure the safe, efficient, and cost-effective production of high-quality products.Key ResponsibilitiesAssist in developing and maintaining production procedures, work instructions, and process documentation.Support process improvement initiatives focused on safety, quality, productivity, and cost reduction.Assist with training and development programs for hourly production employees.Provide day-to-day technical support to

Memphis, TN 38141 • (29.8 miles) • Full Time • 9/19/2026

Description: We are looking for a determined and adaptable candidate to join our Team as an OEM Maintenance Technician. You will get to work with outstanding leadership and field teams and be part of the Company’s success! Our OEM Maintenance Technicians inspect and maintain wind turbine components in storage.Job Responsibilities:Participates daily in safety meetings.Completes inspection of equipment and tools for safe use.Participate in Job Safety Analysis.Follow storage manual and standard operating procedures for performing maintenance on wind turbine parts.Complete written and electronic reports of work performed.Performs housekeeping.Performs other job-related duties.Perform facility maintenance including but not limited to weed control, snow removal, pumping water, shop cleaning.Requ

Olive Branch, MS 38654 • (33 miles) • Full Time • 9/17/2026

AtCross Company, we don’t just show up for workwe show up for a company we actually own. As a100% employee-ownedindustrial technology leader, we provide specialized expertise in automation, hydraulics, precision measurement, and more that keeps the world’s manufacturers moving.We operate on the principle ofServant Leadership: we hire smart, driven people and then get out of their way so they can do what they do best. When you join the Cross team, you aren't just an employee; you’re anowner-associatein a stable, transparent, and high-performance environment where your voice truly matters. Job Summary:Responsible for performing quality calibrations adhering to corporate quality standards and procedures.Essential Functions:Calibration encompassing the following core disciplines: Temperature,

Memphis, TN • (22.4 miles) • Full Time • 9/16/2026

Senior Mechanical Project Manager (Traveling)Nationwide Projects | Full-Time Travel RequiredConfidential Opportunity – Partnered with a Leading Mechanical ContractorWe are partnered with a reputable, national mechanical contractor seeking a Traveling Senior Project Manager to lead large-scale HVAC and mechanical construction projects across the U.S.About the RoleAs a Senior Project Manager, you will lead projects from preconstruction through closeout, ensuring safety, quality, budget, and schedule are consistently achieved. This is a high-impact role for someone who thrives in dynamic environments and enjoys working on diverse, complex projectsKey ResponsibilitiesLead and enforce jobsite safety and compliance cultureManage scope, schedule, and field resourcesOversee procurement and subcont

Memphis, TN • (22.4 miles) • Full Time • 9/15/2026

GIG South / Generation Industrial & GovernmentThis position is not eligible for recruiting or sourcing by outside parties.Disclaimer: Be cautious and only respond to emails from our “mesainc.com” domain. We will never ask for sensitive information, such as bank account details, SSN, etc., via email. If you receive any communication asking for such information, it is not from Mesa. For any concerns, or to verify the authenticity of a message, please contact us through our official channels.We’ve got the power to energize Your career and spark YOUR Work/Life Balance through professional development and exceptional benefits. Don’t delay, plug in today for an inclusive meaningful career in power, distribution, transmission, engineering, design, technology, or innovation at Mesa Associates, Inc

Hernando, MS 38632 • (29.1 miles) • Full Time • 9/15/2026

1st and 2nd shift Available!Job SummaryThis position has responsibility and authority to perform all machinist functions. Manufacture production and/or prototype devices/articles/customer products using manual and/or CNC/NC machine tools – Swiss, mill, lathe and EDM – applying industry standard machine tool techniques ensuring that the customer product requirements and Tegra Medical requirements are met while meeting the requirements of the quality policy and quality objective of Tegra Medical ISO 13485 quality management system. And to support the roll of Machine Operator.Role and ResponsibilitiesPerform all Machine Operator functionsPerform job assignments on manual and/or CNC/NC machines.Assist Machine Operators as needed by performing set-ups, offsets, and tool changes on both assigned

Memphis, TN • (22.4 miles) • Full Time • 9/18/2026

Growing company in need of a Service Technician or Lead Service Technician. The company provides air conditioner filter replacement services for commercial HVAC units. Attributes required include:* Must be unafraid of heights* Must be in good enough physical condition to climb ladders* Must be willing to work outside year-round* Must have a valid drivers license and a good driving record* Must be able to pass a drug screen and background check.Company-sponsored medical insurance will be available after successful completion of the introductory period. Please forward resume or work history summary.\nCompany DescriptionNational Filter Solutions, Inc. sells air conditioner filters and provides filter replacement services in a six-state area. We have offices in Memphis, Little Rock, Van Buren,

Memphis, TN 38131-0301 • (22.4 miles) • Full Time • 10/9/2026

Join a Team Shaping Aerospace Manufacturing for GenerationsFor generations, Bell-Memphis has been a trusted manufacturer of precision-engineered components serving the aerospace industry and other customers throughout the United States and around the world. With roots dating back to the era of the legendary B-17 Memphis Belle, our parts have played a role in supporting aircraft performance and reliability for decades. From legacy aerospace programs to today's demanding manufacturing environments, Bell-Memphis is committed to quality, innovation, and craftsmanship.Why Join Bell-Memphis?At Bell-Memphis, we're proud of the solutions we provide and the long-term relationships we've built with our customers, but what truly sets us apart is our people. As an organization, we've maintained a cult

Osceola, AR 72370 • (44 miles) • Full Time • 9/24/2026

WHO WE AREWe are a leading supplier of methacrylate chemistry. As a global company with around 2,800 employees, we are represented on three continents. We serve a global market with our MERACRYL® methacrylates and PMMA molding compounds under the PLEXIGLAS® brand (in the Americas registered under the trademark ACRYLITE®), which we manufacture in our worldwide production network. Our products supply growth markets including the automotive, construction, and medical technology industries.Rhm is committed to operating with social responsibility, andsustainabilityforms an integral part of our business strategy. We view our employees as our strength, and we value diversity and inclusion. If you thrive in an environment where individual contributions are both visible and recognized, Rhm may be r

Memphis, TN 38133 • (33.7 miles) • Full Time • 9/16/2026

ObjectiveA Production Operator position would include prep-work, masking, grit blasting, finishing, passivation, cleaning and perform duties assigned by the Production Manager.Essential FunctionsPrep-work of partsMasking partsGrit blasting of partsFinishing of partsCleaning of partsPassivation of partsContinuously monitor process, keeping the production output within the required tolerancesKeep the tooling clean and ready to operateAssist and perform duties as assigned by Production ManagerUse calibrated instruments to perform critical measurementsWorking in the Company's Quality and Safety System context, in accordance with its procedures and requirementsWork EnvironmentThis job operates in a manufacturing environment. The individual will be required to adhere to safety policies and proce

Olive Branch, MS 38654 • (33 miles) • Full Time • 10/12/2026

Join a USA Today Top Workplace!Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third-generation, family-owned business dedicated to helping manufacturers improve productivity and stay competitive.About this Role:We are hiring Field Service Technicians to support and service advanced industrial equipment, including CNC machine tools. No prior CNC experience required. We actively hire and train experienced technicians from related industries such as:- Commercial HVAC- Industrial electrical or low voltage electrical- Diesel / heavy equipment- Field service / industrial maintenance- Aircraft mechanicsIf you have strong troubleshooting skills and experience working on complex mechanical and electrical systems, we will train you to become an exper

West Memphis, AR 72301 • (11.3 miles) • Full Time • 10/10/2026

Description: OSP Field DesignerLocation: Remote with Regular Fieldwork in Little Rock, AR and the surrounding areasAbout the RoleAre you an experienced OSP fiber design professional who enjoys both fieldwork and design work? Sigma Technologies is looking for an OSP Field Designer to support telecommunications projects through a combination of field data collection, route verification, drafting, and design.This role will initially support project work in the Little Rock, AR and surrounding areas. As project needs grow and shift, the assigned work areas may change. Applicants must be willing and able to travel outside of the initial starting areas, including overnight travel when requiredWhen not performing field data collection, this position will work remotely. Regular local fieldwork is r

Memphis, TN 37501 • (23.6 miles) • Full Time • 10/5/2026

Remco is ready to take your Career to the next level. Are you?Restaurant Equipment Maintenance Company (REMCO) is seeking Field Service Technicians responsible for troubleshooting, diagnosing, and repairing commercial equipment, HVAC and Refrigeration equipment at our customer locations.An effective Service Technician at REMCO has the ability to:Properly troubleshoot, diagnose, and repair Commercial Refrigeration Equipment, Ice Machines and HVAC systems to include installation and repairing systems by mounting, installing, fabricating, or connecting compressors, condensers, evaporators, motors, expansion and discharge values, motors and fans, control panels, switches, fuses, filters, gauges, ducts, piping, tubing, and related components.Work on commercial kitchen and cooking equipment such

Memphis, TN • (22.4 miles) • Full Time • 9/29/2026

At National Carwash Solutions (NCS), we're building the future of car wash technology with a team that's passionate about innovation and committed to excellence. Whether you're designing cutting-edge products and systems, or delivering exceptional service, your hard work helps us leave the world cleaner than we found it. Your ideas matter here. Our core values of hard work, quality, and innovation have remained constant since our founding over 50 years ago.Why Join Us?We've built an authentic workplace where you can bring your whole self to work. We celebrate diversity and inclusion, support work-life balance and offer comprehensive benefits including competitive wages, health coverage, a matching retirement plan and paid time off. As North America's leading provider of carwash solutions,

Memphis, TN 38108 • (23.8 miles) • Full Time • 9/29/2026

Description: Tri-Stave Valve is looking for an experienced Valve Technician to help support both customer and shop operations.Duties and Responsibilities include the following. Other duties may be assigned.Disassemble Relief ValvesSandblastInspectionMachiningRe-AssemblyTestingTagging and PackagingWork Environment:regularly exposed to work near moving mechanical parts;work in high, precarious places;outdoor weather conditions; and outdoor weather conditions.exposed to wet or humid conditions (nonweather);fumes or airborne particles; toxic or caustic chemicals; and vibration.The noise level in the work environment is usually very loud. Requirements: Qualifications:To perform this job successfully, an individual must be able to perform each essential dutysatisfactorily. The requirements liste

West Memphis, AR 72301 • (11.3 miles) • Full Time • 9/28/2026

Key Responsibilities:Mount, balance, rotate, and repair tires across various vehicle types: passenger cars, light trucks, large trucks, and industrial vehicles.Diagnose and repair mechanical issues on semi-trucks and trailers, including:Commercial TiresHVAC systemsBrakesSteering & SuspensionPM InspectionsDrivetrainElectrical SystemsConduct fleet inspections and routine maintenance.Operate company vehicles safely and in compliance with all traffic regulations.Respond to roadside service calls using a service truck (F-350), when needed.Use and maintain Tire Pressure Monitoring Systems (TPMS).Assist with inventory loading, unloading, and physical counts.Participate in ongoing training, follow safety protocols, and uphold company policies.Perform other duties as assigned.Skills, Education & Re

Memphis, TN • (22.4 miles) • Full Time • 9/19/2026

Automation Technician IIDepartment: Engineering / OperationsLocation: Headquarters Cordova, TNReports To: Operations Engineering ManagerTravel: Up to 10%Compensation:Up to $25.00/hour, based on experience and qualificationsAbout TransnetyxAt Transnetyx, we're advancing scientific discovery by delivering innovative genomic services and software solutions that empower researchers around the world. Every sample processed and every customer served contributes to breakthroughs in life sciences, helping improve the future of human health.Our people are at the center of everything we do. We foster a collaborative, values-driven culture where innovation, accountability, continuous improvement, and exceptional customer service come together to make a global impact.If you're looking for meaningful w

Olive Branch, MS 38654 • (33 miles) • Full Time • 9/15/2026

With 100 years of success, Nixon Power Services is the world’s largest distributor of Kohler Power generators. We operate in an environment where flexibility and a willingness to take on new responsibilities keeps things interesting! We value team members who are passionate, down to earth and have a “can do” attitude, and enjoy providing premium services to customers.We’re looking for a Generator Technician to join our team! This role is essential to our business and requires a hands-on approach that ensures high-quality and timely service! You do what it takes to keep generators in top-notch condition and help keep our business humming along smoothly for a world-class customer experience.What’s in it for you?Competitive hourly rate + overtime opportunities.Company truck + fuel card.Full B

Memphis, TN 38103 • (18.4 miles) • Full Time • 10/8/2026

PURPOSE The Technical Manager provides technical leadership for rubber manufacturing, including compound development, testing, troubleshooting, and process improvement. This role ensures products and processes meet quality, performance, cost, and customer requirements.ESSENTIAL DUTIES AND RESPONSIBILITIESLead and engage in technical troubleshooting of existing products and customer complaintsDesign new or refine existing polymersLead the technical team in overseeing raw material qualification and approvals, certification of finished goods physical properties, troubleshooting of complex technical issues, and development of new productsInfluence, assist, and mentor the team to develop technical skills and techniquesRead and write technical reportsDevelop, write, and edit existing standard op

Memphis, TN 38119 • (29.8 miles) • Full Time • 10/4/2026

In charge of inspecting products at different phases in their development to ensure they meet a set of consistent standards.Duties include the following:performing visual inspectionsrecording quality issues and planning processes to decrease the instances of defects in products.all other tasks assigned by warehouse management staff

Millington, TN 38053 • (29.1 miles) • Full Time • 9/28/2026

Description: Client Solution Architects (CSA) is currently seeking a Software Quality Assurance Analyst to support a program at Millington, TN.For nearly 50 years, CSA has delivered integrated technology and operational support services to meet the defense and federal sector's most complex enterprise needs. Working from operations centers and shipyards to training sites and program offices, CSA deploys experienced teams, innovative tools and proven processes to advance federal missions. How Role will make an impact:Programs, analyzes, and runs tests on new or modified software programs, including documentation, diagram, and flowchart, and software development procedures used to verify that programs function according to user requirements and conform to establishment guidelines.Conducts com

Memphis, TN 38141 • (29.8 miles) • Full Time • 10/10/2026

Account Manager is responsible for developing and maintaining strong customer relationships. In partnership with assigned customers, Account Manager understands the customer’s business needs and creates solutions, guiding and advising for the profitable sale of any and all Mac Papers products - Packaging & Paper. Account Manager must work to maintain existing business while also finding new sales leads, through prospecting, business directories, client referrals, etc. (This is meant to be a guide. Duties may vary dependent upon management.)Essential Position Functions:Maintain and aggressively grow existing account base. Develop and execute a territory business plan to be reviewed quarterly with commercial leadership.Prospect, identify and develop customers for new business opportunities f

Memphis, TN 38120 • (29.5 miles) • Full Time • 10/6/2026

As a Benefits Account Manager, you will provide service and support to clients and agents, by assisting, maintaining, and expanding assigned accounts. This role is vital in the overall support of the department in a fast-paced, detail-oriented role. At our agency, we offer a comprehensive benefits package to help attract & retain employees.Duties:Manages overall relationship with clients ensuring retention of the book of business and high satisfactionMarkets renewals and new businessSelects markets for solicitationAnalyzes market proposals for verification of benefits, premiums, and competitivenessAssists the broker in the design and preparation of marketing and presentation materialsMeets with clients for proposal delivery or open enrollment meetings and explanation as needed or directed

Memphis, TN • (22.4 miles) • Full Time • 10/5/2026

A growing national auto parts delivery company is looking for a Key Account Manager to support several clients.Individual will be the face of the company serving as the liaison between the company and the client.Primary responsibilities include but are not limited to:Manage a pool of independent contractor drivers to support parts deliveryRecruit and mentor drivers to meet the needs of the clientsMaintain contact with client on regular basis to address needsDaily record keepingThe ideal candidate should have the following qualities:Excellent customer service skills with a can-do attitude, “never say no to the customer!”Exceptional organizational skillsAbility to work in a fast-paced, ever-changing environmentProven reliability, responsibility, and excellent communication skillsA self-start

Memphis, TN • (22.4 miles) • Full Time • 9/26/2026

Sales Account Manager – Automation & Fluid PowerHiring in: Memphis, Jackson, NashvilleProSearch Recruiting Partners, an independent franchise of the MRINetwork that specializes in hiring for factory automation OEMs and integrators, is hiring for a long-established leader in automation, motion control, fluid power, and mechatronic solutions. As part of their strategic growth plan, the company is adding multiple Sales Account Managers to support key territories in Roanoke and Lynchburg. This is a high-impact role that blends technical expertise in automation and hydraulic/fluid power products with consultative selling to deliver solutions that drive real value for customers.The Sales Account Manager will be responsible for:Managing and growing a portfolio of established accounts while identi

West Memphis, AR 72301 • (11.3 miles) • Full Time • 9/18/2026

Overview Company Overview:Allied Universal®, North America’s leading security and facility services company, offers rewarding careers that provide you a sense of purpose. While working in a dynamic, welcoming, and collaborative workplace, you will be part of a team that contributes to a culture that positively impacts the communities and customers we serve. Job Description Starting at $69,900.00 / YearMust have 5+ years security experience and 2+ years supervisory experienceJoin a well-established company with a strong reputation in the industryHiring now – find your future here!Allied Universal® is hiring a Security Account Manager in West Memphis, Arkansas. As an Account Manager, you are the driving force behind daily security operations, ensuring the safety and well-being of the people

Memphis, TN 38103 • (18.4 miles) • Full Time • 9/18/2026

Join a USA Today Top Workplace!Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufacturers of precision machined parts in the United States. Our mission is to help manufacturers maintain a competitive advantage in the world economy by improving productivity.Join a Market Leader in Advanced ManufacturingMorris South is seeking a driven sales professional to drive profitable growth by developing new business and expanding relationships with manufacturers. This role focuses on delivering CNC machine tools, automation systems, and advanced manufacturing solutions that help customers improve productivity and performance.The ideal candidate has experience in industrial, technical,

Memphis, TN 38111 • (24.3 miles) • Full Time • 9/16/2026

Benefits:Bonus based on performanceCompany partiesEmployee discountsFree uniformsOpportunity for advancementTraining & developmentBenefits/PerksCompetitive CompensationGreat Work EnvironmentCareer Advancement OpportunitiesJob Summary We are currently seeking an Account Manager to join our team! As an Account Manager, you will be one of the direct contacts for our customers, working with both new and existing clients to retain their business and increase revenue, creating and hitting weekly and monthly sales goals. You will also be managing a team of sales professionals under you, mentoring and providing professional guidance and development as needed. The ideal candidate is charismatic and competitive. ResponsibilitiesManage a team of sales professionalsHandle new and existing accounts and

Arlington, TN • (41.4 miles) • Full Time • 9/17/2026

About Us:WorldTech Management Solutions is a trusted Managed Services Provider (MSP) serving businesses in the Memphis area with reliable, forward-thinking IT support. For years, we've been the go-to partner for organizations looking to offload their technology management to experts who deliver consistent results and exceptional customer service.We’re expanding our team and seeking a Help Desk Support -Systems Administrator who’s passionate about solving IT challenges and helping businesses thrive through smart technology use. If you're looking to grow your IT career in a supportive environment with exposure to the latest tools and technologies, we'd love to connect.What You'll Do:As a Systems Administrator, you’ll play a key role in supporting clients’ technology needs through a mix of re

Germantown, TN 38138 • (32.5 miles) • Full Time • 10/10/2026

We are seeking a dependable, customer-focused IT Help Desk Specialist to provide technical support to employees and help keep day-to-day technology operations running smoothly. This position will troubleshoot hardware, software, network, and user-access issues while providing responsive and professional support to end users.The ideal candidate has 2-3 years of IT help desk or technical support experience, strong troubleshooting skills, and the ability to explain technical issues clearly to users with varying levels of technical knowledge.About Us:Adams Keegan is a national employer services firm with approximately 150 employees. We provide a comprehensive suite of Human Resources services including payroll, employee benefits, worker’s compensation, HR management, 401(k), and state licensin

Memphis, TN 38134 • (29.6 miles) • Full Time • 10/10/2026

A Farmers Insurance Customer Sales and Service Representative provides customer support by answering inquiries, resolving issues, and managing accounts, while also generating sales by providing quotes, cross-selling products, and asking for referrals. Key responsibilities include handling a variety of customer interactions via phone and email, documenting records, maintaining product knowledge, and meeting sales goals while working in conjunction with Agency Producers. ResponsibilitiesMeet new business production goals and objectives as established.Develop insurance quotes, make sales presentations, and close sales.Develop ongoing networking relationships with Real Estate Agents, Mortgage Lenders, Title Companies, Auto Dealers, etc.Process customer policy change requests.Secure all Trailin

Collierville, TN 38017 • (40.8 miles) • Full Time • 9/20/2026

Position OverviewSuccessful State Farm Agent is seeking a qualified professional to join their winning team for the role of Licensed Customer Service Representative - State Farm Agent Team Member. Active Property and Casualty license is required.We seek an licensed energetic professional interested in helping our business grow through value-based conversations and remarkable customer experience. Only candidates who meet the following criteria will be considered for this role: 1. Must have an active Property and Casualty insurance license. 2. Must be able to make the commute to our agency location in Collierville, TN. This is an in-office position. Responsibilities include but not limited to:Establish customer relationships and follow up with customers, as neededProvide prompt, accurate, an

Memphis, TN • (22.4 miles) • Full Time • 9/23/2026

Description: Stones River Electric is seeking a Commercial Service Electrician (Bucket Truck) to support our growing national operations, offering competitive hourly rates based on experience.This role requires a skilled electrician with bucket truck experience who can troubleshoot, work independently, and perform service work across commercial environments including retail, office, industrial, and hospitality facilities. Responsibilities include diagnosing electrical issues, performing repairs, operating and maintaining a bucket truck, and ensuring work is completed safely and efficiently.The ideal candidate is dependable, self-sufficient in the field, and able to take ownership of their work with minimal supervision. This position requires frequent travel based on project needs, includin

Memphis, TN 38116 • (21 miles) • Full Time • 10/1/2026

Hello, guys!General Logistics Carrier is seeking reliable Owner-operator truck drivers to join our team! We’ve delivered a great amount of loads all over the US and looking forward to delivering many more.Basic Requirements:You should have your own vehicle.You need to have a COI with AUTO LIABILITY $1.000.000 and CARGO $100.000.Be a US citizen, resident, green card or work authorization holder.You and your drivers should speak, understand, and read basic English.Vehicle Requirements:Sprinter should not be older than 2013.All vehicles should have a minimum of 4 straps and PPE.All decals should be removed.Driving experience of 6 months.We require a minimum dimensions of your vehicle (cargo space):Length - 100 inches.Width - 48 inches.Height - 53 inches.For more information, please contact No

Southaven, MS 38671 • (23.2 miles) • Full Time • 9/27/2026

Join ODYSSEIA Inc.Apply Here:https://docs.google.com/forms/d/1Y2_yqL1cuvdVXJVY2fVZI8WnDCRsmKURQX3Y8-3XYhM/editLearn more about us: https://www.odysseia-transport.com/Instagram: https://www.instagram.com/odysseia.incODYSSEIA Inc. is an established carrier company seeking Sprinter Van & Cargo Van independent drivers to cooperate under an Independent Contractor Agreement.We are also looking for 12–14 ft box trucks (under 10,000 lbs GVW).Driver & Equipment Requirements:2016+ Cargo Van or Sprinter (NO rental vehicles).Minimum cargo space: 120 x 50 x 50 inches (L x W x H).No MC / No authority required.1+ years of driving experience.Driving record is required.No decals, stickers, or logos on the van.Must install tracking apps (Macropoint, Trucker Tools).Insurance Requirements:$1,000,000 Commercia