Alhambra, CA 91802 • (11 miles) • Full Time • 9/22/2026

Benefits:401(k) matchingDental insuranceHealth insurancePaid time offTraining & developmentVision insuranceCompetitive salaryEmployee discountsOpportunity for advancementDesired Qualifications:Familiarity with, and a working knowledge of related standards from the American National Standard Institute (ANSI), NACE International (NACE), Society for Protective Coatings (SSPC), NSF International (NSF), American Society for Testing and Materials (ASTM), etc.Familiarity with but not limited to standard test practices for coating work surface preparation techniques, coating inspection instrumentation, measurements of film thickness, protection of surfaces, use and application of fillers, adhesion testing, spark testing, etc.Working knowledge of the Cal/OSHA Construction Safety Orders and applicab

Whittier, CA 90601 • (11.6 miles) • Full Time • 9/22/2026

Title :Quality TechnicianPay Rate: $22-24/HRLocation: 4040 S CAPITOL AVE ,Whittier5:00 AM – 1:30 PM. Overtime available as needed, especially toward end of month production pushes.The Technology Quality Technician is responsible for conducting quality control activities, including inspections, tests and results reporting. The Technology Quality Technician combines practical skills with understanding of the overall Quality Management System and the impact of nonconformances on the performance of equipment and systems. * Inspect documentation, parts, components, materials, subassemblies and equipment against stated specifications, using measurement systems with valid calibration and acceptable repeatability and reproducibility. Comply with applicable inspection procedures and standard work.

Pasadena, CA 91109 • (12.3 miles) • Full Time • 9/22/2026

OVERVIEW Must be a US Citizen Duration - 6 month contract position with potential to be extended or converted W2 with full benefits Customer and contract specific training will be required and provided. Location - NASA Jet Propulsion Laboratory, Pasadena, CA (onsite) Offer contingent on ability to successfully pass a background check and drug screen Salary ranges are determined by role, level, and location. The range displayed on each job posting reflects the minimum and maximum target for new hire salaries for the position across all US locations. Within the range, individual pay is determined by work location and additional factors, including job-related skills, experience, and relevant education or training.JOB DESCRIPTION This is an opportunity to be a Mechanical Design Engineer in the

Monterey Park, CA • (13 miles) • Full Time • 9/22/2026

Production Associate 2nd shiftLocation: Monterey Park, CAIndustry: Dietary Supplements / Nutraceuticals / Food & Beverage ManufacturingPosition SummaryBBSI is seeking reliable and detail-oriented experienced Production Associates to support manufacturing operations at a nutritional and wellness product manufacturer located in Monterey Park, CA.Qualified candidates should have proven production or manufacturing experience within the dietary supplement, nutraceutical, nutritional product, or closely related manufacturing industry. Experience specifically working with powdered supplements, nutritional blends, vitamins, functional wellness products, or similar products is highly desirable.The facility manufactures a variety of dietary supplement and wellness products, including superfood powde

Whittier, CA 90602 • (13.6 miles) • Full Time • 9/22/2026

Punch Press Operator Location:Whittier, CAEmployment Type:Full-Time About Our Client Our Client is a leading precision metal stamping manufacturer specializing in high-quality aerospace components. With a strong commitment to quality, precision, and continuous improvement, Our Client utilizes advanced manufacturing processes and state-of-the-art equipment to produce complex metal components that meet strict aerospace industry standards.Our Client provides a stable work environment, competitive compensation, excellent benefits, and opportunities for long-term career growth within a fast-paced precision manufacturing operation. Position Overview Our Client is seeking a dependable and detail-orientedPunch Press Operatorto join their aerospace manufacturing team in Whittier, CA. The ideal cand

Montrose, CA 91020 • (16.4 miles) • Full Time • 9/22/2026

About Company:Who Are We?ELIQUENT Life Sciences is a leading global consulting group delivering regulatory affairs, pharmacovigilance, quality, and compliance solutions that support pharmaceutical, biotechnology, medical device, and combination product companies across therapeutic modalities, phase-based pathways, and major global markets.Why explore your future at ELIQUENT?ELIQUENT Life Sciences is a trusted global consulting firm helping life sciences companies navigate regulatory complexity and bring breakthrough therapies to market. Founded by former regulators and industry experts, we offer end-to-end support in regulatory affairs, pharmacovigilance, and quality compliance. Our team is driven by a shared mission to improve global health through innovation, collaboration, and integrity

Brea, CA 92821 • (16.6 miles) • Full Time • 9/22/2026

1st shift - M-F - 6:00 AM - 2:30 PM2nd shift: - M-F - 2:30 PM – 11:00 PMSUMMARYThe SMT In-Process AOI Inspector perform visual, electrical, and dimensional inspections of printed circuit board assemblies and will be responsible for daily inspections to assure compliance with manufacturing traveler, engineering drawings, bill of materials, process specific instructions, critical criteria, IPC standards (IPC-610, J-STD-001, Class 2), and other applicable documents. The inspector will be utilizing AOI equipment for the first articles, monitoring the line, and production runs for inspection operations utilizing 2D AOI equipment.RESPONSIBILITIESResponsible for setup and operation of 2D AOI (Automated Optical Inspection) machines.Perform visual and dimensional inspections of printed circuit boar

Santa Fe Springs, CA 90670 • (17 miles) • Full Time • 9/22/2026

Description: Company Background & SummaryVotaw Precision Technologies is a trusted leader in the manufacturing of complex precision components, assemblies, and systems for the aerospace, defense, and industrial sectors. With a strong reputation for technical excellence, quality craftsmanship, and on-time delivery, Votaw supports some of the world’s most demanding programs through its advanced manufacturing capabilities. The company specializes in precision machining, fabrication, welding, and complex assembly operations for mission-critical applications. Votaw Precision Technologies is committed to continuous improvement, innovation, and delivering best-in-class solutions to its customers.We are seeking a highly motivated and experienced 4/5 Axis Machinist to join our growing team. This po

Glendale, CA 91204 • (17.8 miles) • Full Time • 9/22/2026

About Us:Counseling 4 Kids is a resilient community mental health agency driven by our steadfast commitment to quality care and unparalleled dedication to client engagement. At the core of our mission is a profound belief that every child deserves compassionate support and effective treatment. We prioritize our clients above all else, ensuring their needs are met with empathy and expertise.Why Counseling4Kids?Our agency is not just a place of work; it's a dynamic environment where innovation, teamwork, and resilience flourish and where resilience is valued. We embrace creativity and collaboration, fostering a culture of welcoming and nurturing new ideas. Our commitment to staff well-being is paramount, providing a supportive and inclusive atmosphere where every team member can thrive and g

Los Angeles, CA 90058 • (18.7 miles) • Full Time • 9/22/2026

Growing meat processing company located in Vernon is seeking Quality Control Technicians for 2nd shift.Compensation: $20 - $23 per hour (Depending on Experience)Monday – Saturday2nd shift starting at 12pmCandidates must be available for overtime and weekends as needed.Responsibilities:- Audit production lines, sanitation processes, and employee adherence to GMPs and SOPs.- Collect raw, in-process, and finished product samples for microbiological and analytical testing (e.g., pH, moisture, weight).- Implement HACCP plans to identify and mitigate safety risks.- Maintain detailed inspection records and assist with food safety data verification.- Investigate quality deviations, identify root causes, and initiate corrective actions.- Manage holds on nonconforming materials to ensure product qua

Chino, CA 91710 • (18.7 miles) • Full Time • 9/22/2026

Benefits:401(k)Employee discountsHealth insuranceTraining & development Cosmo Appliances is a rapidly growing appliance brand with a deep understanding of current and future customers and their needs in the kitchen. With our products, we want to inspire people to come together and create unforgettable moments. We value our employees and encourage each person to contribute ideas for improvement in both daily procedures and long-term goals. You can enjoy the satisfaction of using your particular skills to help people while working in a positive and encouraging environment. We are looking for a capable Returns Specialist who can assist in ensuring that all warehouse policies and procedures are properly adhered to and that we are achieving our product distribution goals. This role applies to t

Los Angeles, CA 90021 • (18.9 miles) • Full Time • 9/22/2026

Meet the Owned Brand division of REVOLVE:REVOLVE is the next-generation fashion retailer for Millennial and Generation Z consumers. As a trusted, premium lifestyle brand and a go-to source for discovery and inspiration, REVOLVE delivers an engaging customer experience from a vast yet curated offering of over 45,000 products. Founded in Los Angeles in 2003 by co-CEOs, Michael Mente and Mike Karanikolas, REVOLVE’s family of brands includes their luxury offering, FWRD and a portfolio of 24 owned brands such as Lovers + Friends, Tularosa, NBD and RAYE.The Owned Brand division within REVOLVE is an industry-leading fashion design and production house based in Los Angeles. Leveraging the power of REVOLVE’s data driven merchandising, combined with raw creative talent, results in an unparalleled ab

Downey, CA 90242 • (19.8 miles) • Full Time • 9/22/2026

Title: IT Production Support AssistantEmployment Type: Temporary contractCompensation Range: Pay: $22.00 - $29.00Location: Downey, CAWork Schedule: Hybrid; 40 hours per week; schedule may include day, swing, overnight, weekends, and 24/7/365 coverage based on operational needsIndustry: County Government / Information TechnologyCompany OverviewThis organization operates within a large county government technology services environment and supports critical internal systems, infrastructure, production applications, and operational technology services. The team provides production support for mainframe and midrange computing environments that require consistent monitoring, issue resolution, documentation, and coordination across a 24/7/365 operating model.Position SummaryThe IT Production Supp

Ontario, CA 91764 • (20.8 miles) • Full Time • 9/22/2026

Manufacturing Production WorkerLocation: Ontario, CAPay: $18 - $20 per hour depending on experienceSchedule Rotating schedule, Monday through SundayWork 3-4 days per week12-hour shifts with overtime available1st Shift: 3:00 AM - 3:30 PM2nd Shift: 3:00 PM - 3:30 AMMust be flexible to work weekends and rotating days as scheduledExample Schedule:Work Monday, off Tuesday and Wednesday, work Thursday and Friday. The following week, your schedule rotates and you may work the days you previously had off.About the Role A leading manufacturer of nutritional bars and functional powder products is seeking Production Line Workers/Palletizersto join their growing team. This is a great opportunity for individuals looking for long-term employment, plenty of overtime, and opportunities for advancement.Ess

Ontario, CA • (21.4 miles) • Full Time • 9/22/2026

Controls Engineer – SEP / EPP / Tooling PLCWe are seeking an experienced Controls Engineer / Automation Engineer with a strong background in Tooling PLC, Allen-Bradley ControlLogix, plant-floor automation, and automotive manufacturing controls.Candidates may qualify through either of the following backgrounds:Direct hands-on experience with GM SEP (Scalable Error Proofing) and/or EPP (Error Proofing Platform) systems, orStrong Tooling PLC / Automotive Controls experience with the ability to learn and be trained on SEP/EPP systems.The ideal candidate will have hands-on experience programming, troubleshooting, commissioning, and supporting PLC-controlled tooling and automated manufacturing equipment in a production environment.ResponsibilitiesDevelop, modify, troubleshoot, and support Allen-

Los Angeles, CA 90001 • (21.4 miles) • Full Time • 9/22/2026

Director of Quality & Regulatory AffairsKalon Executive Search is partnering with a leading contract manufacturing organization in the nutritional supplement industry to identify a highly accomplished Director of Quality & Regulatory Affairs. This is a key leadership opportunity for an experienced quality professional who thrives in a fast-paced, GMP-regulated manufacturing environment and is passionate about building best-in-class quality systems.The Director of Quality & Regulatory Affairs will provide strategic and operational leadership across Quality Assurance, Quality Control, Regulatory Affairs, and Product Development functions. This executive will play a critical role in ensuring regulatory compliance, driving continuous improvement initiatives, maintaining audit readiness, and su

Anaheim, CA 92801 • (21.9 miles) • Full Time • 9/22/2026

Benefits:Bonus based on performanceCompetitive salaryDental insuranceFree uniformsHealth insurancePaid time offVision insurance Join a Major Automotive Manufacturer 1st shift: 6:00 AM to 2:30 PM Qualifications High School Diploma, GED or equivalent3-4 years + Mechanical assembly experienceQuality Control and laser experience.Experience with Standard Operating Procedures and process requirements.Proficient computer skills including familiarity with Microsoft Office (Excel, Word, Access)Visual and Mechanical inspection and troubleshooting skillsAbility to stand and walk through a full work shift doing repetitive assembly tasks.Ability to lift and carry items weighing up to 50 lbs.Responsibilities: Prepare parts for assembly, assemble partsWork with Laser machineFollow SOP's regarding accepta

Los Angeles, CA 90028 • (21.9 miles) • Full Time • 9/22/2026

Company Description Giant Pictures is a distribution and technology company connecting content owners with the world’s leading streaming platforms. Giant provides aggregation, technical delivery, QC, rights and royalty administration, catalog monetization, YouTube services, and AVOD/FAST distribution, helping rights owners maximize the value of their content across the digital marketplace. Giant Pictures operates the Drafthouse Films label and serves as distribution and technology partner to the Tribeca Festival. Learn more at www.giant.pictures.Job Description WHAT YOU'LL DOPackaging and Delivery.Assemble delivery packages in Telestream Switch, Apple Compressor, and comparable tools. Validate before submission, then deliver through the appropriate portal, aggregator, or accelerated transf

Yorba Linda, CA 92887 • (22.6 miles) • Full Time • 9/22/2026

COMPANY DESCRIPTIONImpact Housing (IH) is a vertically integrated modular design-builder and developer headquartered in Southern California.Our mission is to continuously evolve the world’s most sophisticated and efficient housing delivery system. We pursue this mission by reimagining every element of how multifamily projects are designed, manufactured, and builtdriving down costs, shortening schedules, and expanding access to high-quality housing for the people who need it most, whether through LIHTC or unsubsidized projects.To date this decade, the IH team has built or is actively developing close to 1,500 modular units demonstrating a scalable, repeatable path to affordability. With the capability to produce approximately 1,000 units per year today, IH is expanding to meet growing deman

Los Angeles, CA 90036 • (23.7 miles) • Full Time • 9/22/2026

COMPANYL&R Distributorsis seeking Quality Manager that leads the end-to-end quality system for a Private Label company ensuring products meet consumer safety, regulatory, and brand standards across various beauty categories. This role owns quality KPIs, incident reporting and escalation, traceability, supplier/facility qualification, and production approvalwhile driving sustainability, risk management, and redundancy strategies across materials, components, and suppliers. The ideal candidate balances hands-on systems leadership with cross-functional partnership. The Quality Manager reports to the Vice President of Integrated Supply Chain.Key Responsibilities1) Quality Strategy, KPIs & GovernanceExecute and maintain the Quality Management System (QMS) aligned to industry standards for Cosme

Compton, CA 90221 • (24 miles) • Full Time • 9/22/2026

Packages bearings for shipment, upon completion of cleaning and lubrication, following customer or military specifications and/ or in-house requirements, , including, the use of preservatives and the proper making of bearings and containers specified.Incumbent is responsible for cleaning the area s/he is working in after completing the shift and/or prior to moving to another area for proper housekeeping.Knowledge/Skills/Abilities: Competency in reading and comprehending simple instructions and in reading short memos. Ability to write simple correspondence. Capability to effectively present information in a one-on-one or small group situation to customers, clients, and other employee’s of the organization.Ability to add, subtract, multiply and divide in all units of measure, using whole num

Cypress, CA • (24.3 miles) • Full Time • 9/22/2026

Pyrometry Calibration TechnicianCypress, CA | Full-Time | Monday–Friday | $25– $33/hourReady to Take Your Calibration Skills Further?Join Micro Quality Calibration (MQC) and gain hands-on experience with AMS2750, aerospace pyrometry, TUS, and SAT while working directly with customers throughout Southern California.About MQCFounded in 1978, Micro Quality Calibration (MQC) is an A2LA ISO/IEC 17025:2017 Accredited calibration, testing, and repair laboratory serving the aerospace, defense, medical, and other critical industries. We're growing our team and investing in technology and talent.What You’ll DoPerform Temperature Uniformity Surveys (TUS), System Accuracy Tests (SAT), and instrument calibrations at customer sites.Calibrate thermocouples, furnace/oven controllers, recorders, data logge

Compton, CA • (24.4 miles) • Full Time • 9/22/2026

We're expanding and looking for a highly professional Laser Technician with a passion for aesthetics for our Med Spa. The ideal candidate is a team oriented individual with outstanding patient relations skills. Candidates must also be highly accountable and comfortable working very independently.

West Hollywood, CA 90069 • (25.1 miles) • Full Time • 9/22/2026

GeneralManager,TikTokShopOperationsAbouttheRoleSuperoOrdinary isseekingaVP,TikTokShopOperationstoleadandscaleitssocialcommercebusinessacrossbrands,sales,marketing,andoperations.Thisisahigh-impactseniorleadershiproleforacommerciallymindedoperatorwhounderstandshowtobuildbusinessesthroughTikTokShopandthebroadersocialcommerceecosystem.You’llowntheoperatingperformanceofthebusiness,leadahigh-performingteam,partnercloselywithbrandsandcreators,andtranslatecommercialopportunitiesintomeasurablerevenueandprofit.We’relookingforsomeonewhocanmoveseamlesslybetweenstrategyandexecutionsomeonewhocanlookataP&Linthemorning,workthroughabrandgrowthplanwithaclientintheafternoon,andcoachtheirteamonexecutionthesameday.WhatYou’llOwnP&L&BusinessPerformance:OwnthefinancialperformanceoftheTikTokShopbusiness,includingr

Garden Grove, CA 92841 • (25.9 miles) • Full Time • 9/22/2026

Pay: $19.00 - $47.25.00 per hourJob description:Shift: 2nd; estimated start and end time is 2:00pm - 12:00am (Open to work overtime and weekends)ESSENTIAL DUTIES AND RESPONSIBILITIESUnder general supervision, must exercise knowledge to perform a variety of job duties relating to the proficient set-ups of lathes, mills, and surface grinders including but not limited to:Manufacture and repair tools and dies as required.Ensures that tools, dies and stampings are made to required specifications.Review router to determine setup, tooling and specification of partsAbility to troubleshoot and find resolutionsProvide information for Inspector evaluation and validation of qualityIdentify die codes and componentsAssist and train new operators effectivelyAdhere to all AIC company policiesOther duties

Los Angeles, CA • (26.3 miles) • Full Time • 9/22/2026

Every day, our team members do amazing things in pursuit of our shared purpose to build trust with our clients, partners, subcontractors, and teammates. No matter your background, education, or career path, if you share our vision to create extraordinary experiences, you belong at HITT.Commercial Construction Project Executive - Advanced ManufacturingJob Description:Job DescriptionThe Project Executive provides overall leadership and direction for advanced manufacturing construction projects from preconstruction through final completion and closeout. This individual is responsible for ensuring projects are delivered safely, on schedule, within budget, and in accordance with HITT’s quality standards.The ideal candidate will have significant experience delivering semiconductor facilities, cl

Los Angeles, CA • (26.3 miles) • Full Time • 9/22/2026

Who We AreGITAI is a vertically integrated space and defense company building the next generation of hardware for low-Earth-orbit missions.At our core is the space robotics technology that has defined GITAI from the beginning. A small, highly capable engineering team applies that foundation across satellite buses, in-orbit servicing robotics, and mission hardware for applications such as Earth observation. Today, a major focus of our work is supporting U.S. national security missions, particularly through proliferated LEO satellite constellations and other next-generation space systems.We design, build, integrate, and test much of our hardware in-house. Electrical, mechanical, software, manufacturing, integration, and test teams work closely together, allowing a small team to own complete

Los Angeles, CA • (26.3 miles) • Full Time • 9/22/2026

Mechanical TechnicianLocation: Playa Vista, California (in-person, five days per week)The return lane isn't going to build itself. Come build it with us.Outpost is an orbital logistics company rewriting the rules of global logistics by building reusable Earth-return vehicles that unlock in-space manufacturing, on-orbit warehousing, and 60-minute global delivery through space.Our CarryAll vehicle family returns payloads ranging from 200 kilograms to 10 metric tons, lands within 10 meters of its target, and can then be refurbished and launched again. One vehicle, many missions: responsive logistics and precision delivery for national security; commercial cargo moved with real cadence; R&D payloads flown, tested, and refined across repeatable cycles; and critical aid delivered where roads and

Los Angeles, CA • (26.3 miles) • Full Time • 9/22/2026

Client:Leading Entertainment Firm. Title: Director, Procurement Production Location:Los Angeles, CA 90038 || New York, NY 10036 || Nashville, TN 37201 – Onsite Duration:9 months (Extension/Conversion will be based on performance) Pay Rate: ($95 -$100) on an hourly basis Description: We are seeking a Director, Procurement Production to support procurement across active and upcoming film, TV, media, entertainment, or live-event productions. This is a senior, executive-facing role requiring Director-level production experience, strong procurement expertise, and the ability to work independently with SVP-level stakeholders. Requirements:Director-level experience in production procurement, production operations, sourcing, supply chain, or vendor management.10+ years of relevant experience; fewe

Los Angeles, CA • (26.3 miles) • Full Time • 9/22/2026

About Machina Labs:Engineering moves at software speed. Manufacturingdoesn't. Yet.Machina Labs is changing that. We build intelligent, software-defined factories that produce complex metal structures directly from digital design. By integrating advanced metal forming, robotics, and automated production inside a flexible factory architecture, we enable customers to move from prototype to production in weeks, not years.Backed by Lockheed Martin, Toyota, and NVIDIA,we'rebuilding the manufacturing infrastructurethat defense, aerospace, and advanced mobility programs will run on.If you want to work on hard problems that matter and see them fly, drive, and defend, this is the place.Job Description: Machina Labs is seeking a Senior Mechanical Engineer – Aerospace & Defense to serve as a technical

Garden Grove, CA • (26.4 miles) • Full Time • 9/22/2026

Tystar is a rapidly growing manufacturer of semiconductor materials processing equipment, benefiting from the recent CHIPS and Science Act. Our products are utilized in various segments of the industry, including integrated circuits, MEMS, power semiconductor devices, opto-electronic devices, solar cells, fiber optic devices, and semiconductor materials.At Tystar, we value our employees and offer comprehensive benefits packages, including medical, dental, and life insurance, as well as vacation time. Full-time employees are eligible for benefits after completing a three-month trial period.Currently, we are hiring for the position of Mechanical CAD Drafter. We are looking for someone who is hard-working, detail-oriented, and willing to learn.Job Description:Support the Engineering and Produ

Inglewood, CA • (26.6 miles) • Full Time • 9/22/2026

Operations Finance Manager – Aerospace ManufacturerLos Angeles, CA.Location: Inglewood, California (Onsite)Compensation: $125,000 - $155,000+ Base (flexibility for exceptional candidates)The OpportunityMost finance roles report on what happened. This role will help determine what happens next.Seeking an Operations Finance Manager to partner directly with Operations leadership and build the processes, reporting, forecasting, and cost management infrastructure needed to support a rapidly growing defense manufacturing enterprise.This is a newly created role with significant visibility and influence across the organization. Reporting into Finance while embedded within Operations, you will work directly with manufacturing leaders, program teams, and executive leadership to establish the operati

Carson, CA 90746 • (27.2 miles) • Full Time • 9/22/2026

We are seeking an experienced, detail-orientedCNC Set-up Programmer/Machinistto join theManufacturingteamof our aerospace and defense manufacturing facility. This role emphasizes the CNC Mill and Lathe machinist background but is also an opportunity for an individual to build their career as a high-value Senior Machinist assisting with improving company operations. This role is critical to the front-end acceptance of client requests and implementation of machined part production, router development and first article execution. Ideal candidates will bring experience in both precisionCNC Set-up and machiningprinciples. As well as proven proficiency in MasterCAM programming. This candidate will aid launching new parts into production efficiently and compliantly. Proficiency in set-up and oper

Carson, CA 90746 • (27.2 miles) • Full Time • 9/22/2026

Who We AreAMPAM is a leading Mechanical, Electrical, and Plumbing (MEP) contractor serving large-scale multifamily and commercial projects across California. With 1,500 employees across multiple business units, we are committed to delivering quality, safety, and excellence in every project.Job SummaryDesign Technician I supports the design and drafting of plumbing, HVAC, and electrical systems for multi-family new construction projects. This entry-level position works under the direction of senior designers and engineers to produce accurate, code-compliant design documents, construction drawings, and coordination layouts using CAD and BIM software. In addition, this position offers great chances for career growth and mentorship via a structured development path and seamless integration wit

Hawthorne, CA 90250 • (28.6 miles) • Full Time • 9/22/2026

Job SummaryThis position is focused on the RF design, analysis, and manufacture of antennas, antenna feeds, stationary and mobile antenna systems, and related components.Essential Job Duties and ResponsibilitiesWorks as part of an integrated product team under the direction of a lead RF Engineer and Program Manager.May support multiple programs/products simultaneously.Provide effective and efficient design support during the conceptual design, detailed design, integration, and test phases of a product development program, with the goal of achieving on-time completion of assigned tasks.Prepare and present design and analysis summary material during internal and external design reviews.Support component and antenna system level RF and electrical testing.Support business development activitie

Santa Ana, CA 92705 • (29.1 miles) • Full Time • 9/22/2026

Description: Come join our team at FirstElement Fuel, and be a part of impacting the world in positive ways!FirstElement Fuel along with its True Zero brand is the leader in the deployment of retail hydrogen refueling stations. We are a California-based company established in 2013 to provide safe, reliable, retail fuel to customers of fuel cell electric vehicles. The True Zero retail hydrogen network is the largest in the world today and is critical to California global energy transformation.Our mission is to foster the widespread adoption of hydrogen vehicles and reduce the impact of driving on our planet. FirstElement Fuel is continuously growing the refueling infrastructure and we believe hydrogen will change the world in a positive way.WHAT WE ARE LOOKING FOR: MANUFACTURING SUPERVISORT

Santa Ana, CA 92705 • (29.1 miles) • Full Time • 9/22/2026

Job PurposeThe Manufacturing Technician I is responsible for performing a variety of assembly and production tasks in support of medical device manufacturing. This role ensures products are assembled in accordance with established procedures, quality standards, and regulatory requirements. The position requires attention to detail, adherence to Good Manufacturing Practices (GMP), and the ability to work effectively in a team-oriented, fast-paced environment.Essential Functions and Basic DutiesPerforms simple to moderately complex assembly functions utilizing mechanical skills, a variety of hand tools and assembly fixtures.Operates basic production equipment, tools, and fixtures safely and efficiently.Produces and inspects assemblies to ensure conformance to product specifications.Follow Go

Santa Ana, CA • (29.6 miles) • Full Time • 9/22/2026

At UEI you will be part of a world class team that is working to innovate and revolutionize the meaning of ‘wireless control’. Whether it’s via chips, software licenses or turnkey products, we are continuing to reinvent how consumers interact with devices and services in their home. Each day we make the connected home smarter, easier to connect and use, and more sustainable. Wedelight our Fortune 100 customers such as Comcast, Apple, Samsung, Google, Vivint and Daikin with ground breaking wireless technology solutions such as advanced, voice-enabled remote controls, cloud control solutions, extreme low power Bluetooth silicon with energy harvesting capabilities, smart thermostats and sensors and many other IoT solutions. Position SummaryThe Sr. Electrical Engineer is a senior individual c

Torrance, CA 90502 • (29.9 miles) • Full Time • 9/22/2026

Job Title:Scheduling ManagerLocation:Harbor-UCLA Medical Center located at 1000 W Carson St, Torrance, CA 90502Client: Los Angeles County Department of Public WorksPay Range:$175,000-190,000/year plus benefitsAnticipated Start Date:ASAPProject Duration:Expected to be completed Fall 2027About the Project:The Harbor UCLA replacement is a $1.7B multiyear program. The program consists of various small, medium and large projects. The current HUCLA medical center hospital is not compliant with the state mandate seismic code, and therefore a need for replacement new hospital. In addition, there will be outpatient, support building, parking structure/surface lots, central utility plant, 12KV/66KV substation and utility corridor projects. The scoping documents are complete and initial demolition/ m

Corona, CA • (30.3 miles) • Full Time • 9/22/2026

We are looking for an EXPERIENCED press brake operator to run a mechanical and hydralic press brake. We fabricate commercial stainless steel kitchen equipment for the food service industry. Applicant must have a minimum of 4 years experience to apply for this position. Pay is negotiable and will be based on experience.\nCompany DescriptionPAY IS BASED ON EXPERIENCECompany DescriptionPAY IS BASED ON EXPERIENCE

Tustin, CA • (30.8 miles) • Full Time • 9/22/2026

The Company: VeSync is a portfolio company with brands that cover different categories of health & wellness products. We wouldn’t be surprised if you have one of our Levoit air purifiers in your living room or a COSORI air fryer whipping up healthy and delicious meals for you every night. We’re a young and energetic company, we’ve had tremendous success, and we are constantly growing our team. As we garner more industry attention – just check out our accomplishments and awards by CES Innovation, iF Design, IGA, and Red Dot – we also need driven and talented people to join our team. That brings us to you, and what you’ll be joining. Our teams are smart and diligent and take ownership of their work – they’re confident in their work but know how to collaborate with open ears and a spirit of l