FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Shift: Weekends (3 12's Fri-Sun 6a-6:30p) A&P Lead (Crew Chief) Build an Aviation Career You’re Proud Of At StandardAero, we use our ingenuity and know-how to find solutions for the simple to the most complex challenges in Aviation. Together, we get the job done and done well. What you'll do: Lead and supervise a maintenance crew of 3-6 technicians through all levels ofGulfstream scheduled and unscheduled maintenance to include: 12/24/36/72 monthinspections, 5000 landing inspections, engine changes and discrepancy troubleshooting. At times will work multiple aircraft.Manage labor hours, materials and crew members efficiently. Responsible for the ontime completion of their work orders while maintaining attention to detail, excellentcustomer service and quality workmanship.Working with the Shop Foreman, keeps customers up to date on the status of theiraircraft. As time permits, learns on the job the duties and responsibilities of the ShopForeman.Working with Human Resources, participates in the interviewing and selection of theirstaff. Writes and delivers effective employee performance evaluations and conductscounseling sessions with crew members as needed.Responsible for the on-going development and training of their staff.Other duties as assigned Requirements: Minimum 5 years Gulfstream maintenance experience any model GII through G550performing scheduled and unscheduled maintenance to include: 12/24/36/72 monthinspections, able to perform engine run up.Airframe and Power plant License Required, high school diploma or equivalent required.Must qualify as an Inspector.1 year of supervisory experience required. Preferred Characteristics: Basic knowledge of operating a personal computer or laptop.Knowledge of job-specific machines and tools, including their designs, uses, repair, andmaintenance.Capable of repairing machines or systems using the needed toolsAbility to determine the kind of tools and equipment needed to do a jobAble to perform routine maintenance on equipment and determine when and what kind ofmaintenance is needed.Capable of determining causes of operating errors and deciding what to do about it.Able to perform tests and inspections of products, services or processes to evaluate quality orperformance.Able to install equipment, machines, wiring, or programs to meet specificationsAbility to control operations of equipment or systemsAbility to use logic and reasoning to identify the strengths and weaknesses of alternativesolutions, conclusions or approaches to problems.Able to monitor gauges, dials or other indicators to make sure a machine is workingproperly. Benefits that make life better: Comprehensive Healthcare401(k) with 100% company match; up to 5% vestedPaid Time Off starting on day oneBonus opportunitiesHealth- & Dependent Care Flexible Spending AccountsShort- & Long-Term DisabilityLife & AD&D InsuranceLearning & Training opportunities Salary: $50-63 per hour based on experience Raising the Standard of Excellence since 1911 With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers’ missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us. Inclusivity Is Our Standard It is StandardAero’s policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture.Raising the Standard of Excellence since 1911 With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers’ missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero’s policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero

Overview: CONSIDER A CAREER WITH LAND ROVER SANTA FEWE HAVE THE BEST PAY IN THE MARKET AND RELOCATION ASSISTANCE!Land Rover Santa FeWe are looking to add qualified Master Automotive Technicians to our team!$10,000.00 Sign-On Bonus for Master Technicians | $5,000.00 Sign-On Bonus for Level 2 & 3 Technicians!In addition to our competitive pay, we offer our associates the following benefits:Relocation reimbursement available!**Job training and career advancement opportunitiesHealth, Dental, Vision, Life and Disability Insurance401(k) with company matchEmployee stock purchase programEmployee vehicle purchase programPerformance / longevity bonusesPaid time-offResponsibilitiesEfficient and accurate work in accordance with dealerships and factory standardsComplete system diagnostics and full automotive troubleshooting and testingMaintain an organized shop areaRoad-test vehicles to ensure quality workComply with company safety policies and proceduresCommunicate directly with service advisors regarding the status of the service workContinuously learn new technical information and techniquesAdhere to our values: Integrity, Transparency, Professionalism and TeamworkQualificationsAutomotive Technician Experience Required5-7 Years of Master Automotive Technician experience3-4 Years of Level 2 & 3 Automotive Technician experienceAutomotive technical or trade school degreeNational Institute of Automotive Service Excellence (ASE) certification(s) or certification(s) in: brakes, electrical/electronic systems or engine performance.High School Diploma or equivalentValid driver’s license in the state and good driving recordGroup 1 is a Fortune 250 company that owns and operates automotive dealerships and collision centers in the United States and United Kingdom. We offer our associates a team environment, great benefits and ongoing training and support. If you are in alignment with our values of integrity, transparency, professionalism, teamwork and respect - now might be the time for you to accelerate your career as part of the best company in automotive retail. Apply today or refer a qualified friend!All applicants must pass pre-employment testing to include: background checks, MVR, and drug testing in order to qualify for employment** Relocation Reimbursement must be approved prior to job acceptance Group 1 Automotive is an Equal Employment Opportunity EmployerIND1

BRIEF DESCRIPTION:IDGrind machinist are responsible for producing work in the most efficient manner while meeting the drawing/planning specification /requirements.Sets-up and operates grinding machines to produce parts to established blueprint and engineering specifications. Selects, mounts, attaches and calibrates a variety of attachments to grind angles, contours, lines, spheres, etc. on to surfaces. Set-ups may require blocking, aligning, and securing irregular shaped work pieces. Dress and change wheels for various finish requirements. Relies on experience and judgment to plan and accomplish assigned tasks and goals. May orient, train, assign and check the work of lower-level associates.KEY ACCOUNTABILITIES• Completes set-ups with some supervision/assistance.• Responsible for all phases of part operation set-up to achieve first article acceptance.• Perform and maintain accurate in-process quality inspection and records.• May identify and recommend process improvements that reduce part quality variation.• May improve processes, procedures, and eliminate waste.• Perform other related duties as assigned.DESIRABLE EXPERIENCE, CAPABILITIES AND SUCCESS FACTORSAt least three (3) years experience in operation set-up on CNC ID grinding equipment.Skilled in the use of indicator, gage, dial bores, and plate inspection methods for first article and in-process inspection of precision machined parts.Ability to maintain close tolerances (within .0003”) of ID’s, hold .0003 profile, roundness.Understanding of machine tool accuracies, tool offsets.Knowledge of cutting wheel feeds, speeds, and wheel life for aerospace grinding.Ability to follow verbal instructions and interpret blue print and quality requirements.Ability to communicate with employees and management in a positive manner.Ability to lift a maximum of 25 lbs (over 25 lbs with assistance).Ability to stand for long periods of time.Ideal candidate will have experience with AS9100, 5S, Lean, and Six Sigma.Per ITAR requirements you must be a US Person (US Citizen or Permanent Resident Card Holder). This position is subject to policies and procedures set forth by the State Department and applicants who do not meet such requirements will not be eligible for the position.Salary Range: $24.00 - $32.00Several factors are considered when extending an offer, including but not limited to, the role responsibilities, candidate’s work experience, skills and education.BenefitsMedical, Dental, Vision and Prescription Drug CoverageSpending accounts (HSA, Health Care FSA and Dependent Care FSA)Paid Time Off and Holidays401k Retirement Plan with Matching Employer ContributionsLife and Accidental Death & Dismemberment (AD&D) InsurancePaid LeavesTuition AssistanceAbout Regal RexnordRegal Rexnord is a $6.5B publicly held global industrial manufacturer with 30,000 associates around the world who help create a better tomorrow by providing sustainable solutions that power, transmit and control motion. The Company’s electric motors and air moving subsystems provide the power to create motion. A portfolio of highly engineered power transmission components and subsystems efficiently transmits motion to power industrial applications. The Company’s automation offering, comprised of controls, actuators, drives, and precision motors, controls motion in applications ranging from factory automation to precision control in surgical tools.The Company’s end markets benefit from meaningful secular demand tailwinds, and include factory automation, food & beverage, aerospace, medical, data center, warehouse, alternative energy, residential and commercial buildings, general industrial, construction, metals and mining, and agriculture.Regal Rexnord is comprised of three operating segments: Industrial Powertrain Solutions, Power Efficiency Solutions, and Automation & Motion Control. Regal Rexnord has offices and manufacturing, sales and service facilities worldwide. For more information, including a copy of our Sustainability Report, visit RegalRexnord.com.Equal Employment Opportunity StatementRegal Rexnord is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex/gender, sexual orientation, gender identity, age, ancestry, national origin, marital status, citizenship status (unless required by the applicable law or government contract), disability or protected veteran status or any other status or characteristic protected by law. Regal Rexnord is committed to a diverse and inclusive workforce. We are committed to building a team that represents diverse and inclusive backgrounds, perspectives, and skills. If you’d like to view a copy of the company’s affirmative action plan or policy statement, please email . If you have a disability and you believe you need a reasonable accommodation in order to search for a job opening or to submit an online application, please e-mail .Equal Employment Opportunity PostersNotification to Agencies: Please note that Regal Rexnord Corporation and its affiliates and subsidiaries ("Regal Rexnord") do not accept unsolicited resumes or calls from third-party recruiters or employment agencies. In the absence of a signed Master Service Agreement or similar contract and approval from HR to submit resumes for a specific requisition, Regal Rexnord will not consider or approve payment to any third-parties for hires made.

Overview: With over 150 years of experience,and headquartered in Southern CA, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets.WHY JOIN USWe understand that hiring great people is the foundation of everything we do. Our employee benefits packages include:Competitive pay range: $95k - $120k annually Medical, Dental, Vision and Prescription coveragePaid vacation and holidays401(K)matchLife insurance, AD&D and long-term disabilityTuition reimbursementOpportunities availablenationwideEmployee discountson vehicles, hotels, theme parks, select cell phone bills and so much morePet InsuranceLegal Plan, and ID Theft Protection Responsibilities: Project/BusinessResponsibilities:Manages the Service P/L for assigned branch(s).Forecasts staffingrequirements.Effectively prioritizes customer calls and advises dispatch accordingly.Ensures customer requirements are followed, and calls are completed on a timely basis.Ensures customer rules are accurately adhered to and approves work orders.Reviews dashboards and financial reports and takes appropriate action.Oversees the procurement of parts and supplies.Maintains communication with customers and ensures their expectations are met.Resolves issues or problems that impact customer satisfaction.Manages and maintains fleet, parts and materials inventory, and resolves discrepancies or problems in a timely manner.Develops and maintainslong term relationships with customers and subcontractors.People Responsibilities:Communicates company direction, sets expectations and holds team accountable for results.Provides leaderships, builds a collaborative team and rewards accomplishments of the team.Interviews, selects, hires, and oversees onboarding of supervisors, team leads and technicians.Ensures technicians are scheduled and dispatched efficiently, based on skill level, location, and call volume.Manages performance and provides training, coaching and performance feedback to Supervisors, Team Leads and Technicians.Uses metrics to drive accountability and performance.Ensures compliance of Service policies and procedures, including eSo, refrigerant tracking, time and attendance, etc.Ensures use of PPE and the application of safe behavior, including driving, by all employees.Ensures customer service and quality of work meets customer requirements and Source standards. Qualifications: Project/Business Management:High school diploma, GED, or completion of trade program or technical school. College degree is a plus.10 + years of experience in the refrigeration/HVAC service, commercial construction, or a related industry.Knowledge of commercial refrigeration and HVAC principles and practices, including service hour estimation, labor forecasting, and multiple disciplines involved in area of responsibility.Proficiency in understanding and managing P&L.Demonstrated business acumenProficiency in managing multiple assignments, setting and balancing competing priorities with strong organizational skills and ability to multi task.Ability to solve problems and apply good judgement.Excellent verbal/nonverbal and written communication and presentation skills.Strong customer service skills, including an ability to proactively address customer issues and concerns and ability to forge strong working relationships with customers.Knowledge of jobsite safety, ability to oversee work activities to ensure safe work practices and safety rule compliance.Ability to understand and follow all company policies and procedures and all applicable State and Federal laws.Ability to use typical business tools including E-Mail, Word, Excel, Work Order/Dispatch Software, Enterprise Resource Planning (ERP) software, etc.Good driving record.People Management:5 + years of people management experience.Strong leadership skills, with demonstrated experience managing a diverse and multi-discipline workforce.Proficient in coaching, training, developing and building a team.Proficient in managing time, delegating assignments and following through to ensure good results. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, mgr, lead, supervisor, leader, regional, HVACR, supermarket, rack systems

Overview: If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities: Let MV Transportation expand your toolbox! Do you want a stable career with great and steady pay, a set schedule, and outstanding benefits ! Would you like to work with a company that invests in your growth Then join the MV Transportation team. Start on the path in under 5 minutes by reading the job description and submitting your application. MV Transportation is now hiring experienced Mechanics in your area! Who You Are:As a Mechanic, you will perform preventative maintenance, diagnosis, service and repair of steering, suspension, brakes, engines, transmissions, differentials, electrical, wheelchair lifts, and air conditioning systems. Successful applicants must be able to work safely, perform part analysis on damaged parts and assist in inventory control or other duties, as necessary.What’s in it for YOU:Competitive Pay Rates! 40 hours a week, not flat rateOT as needed over 40 hoursFull Benefits: Medical, Vision, Dental, and 401K planPaid vacationCompany provided uniformCorporate partner discount programCareer advancement through a national companyDuties include, but are not limited to the following: Diagnoses, examines, and investigates vehicles to determine causes of defective operation of vehicle systems and components.Perform scheduled preventative maintenance of vehiclesExecute major and minor repairs of defective components.Document all activities in MV’s Fleet Management System.Maintain work environment in an organized and safe condition. Qualifications: Talent Requirements:High school diploma or equivalent.Combination of at least two (2) to three (3) years of apprentice level verifiable training and experience in automotive or diesel mechanics, which may include high school mechanics courses and/or a regional occupational program.Must be able to pass a pre-employment drug screen and random drug testing.Must maintain a valid Driver’s License and all other required credentials, certifications, and qualifications.Starting pay rate: $34.19/hourMV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment.Qualified applicants with criminal records will be considered for employment in accordance with the Ordinance, and the California Fair Chance Act.#appcast

BRIEF DESCRIPTION:The Carpenter - Skilled Tradesman is an experienced and trainable laborer skilled in carpentry in multiple areas of residential and commercial rebuilding, with a demonstrated track record in insurance restoration work. Effective communication skills are essential during the reconstruction process. Carpenters reports directly to the Project Manager. Candidates are expected to possess a reliable truck and tools to execute tasks to a high standard.Hourly Pay Range is: $21.00 - $36.00PRINCIPAL DUTIES & RESPONSIBILITIES:General carpentry - residential and commercialDemolitionTile WorkHanging cabinetsTrim carpentry-baseboardsDoor hanging and tapingPaintingLight electrical/plumbingRough framing consisting of re-framing homes and setting trussesEnsure company and customer satisfaction through professional appearance, expert workmanship and polite communicationComply with safety, quality & procedural standardsSUPERVISORY RESPONSIBILITY:This position has no direct reportsQUALIFICATIONS & REQUIREMENTS:Direct experience working as a skilled carpenter is requiredKnowledge of carpentry and use of carpentry related hand and power toolsSelf-motivatedWork in confined areas (crawl space)Understand and follow oral and written instructionsCommunicate effectively in oral and written forms to execute required paperworkIdentify hazards in assigned work areasWork safely without presenting a direct threat to self or othersMeet the mental and physical demands of the jobAbility to work with people in a professional mannerMaintains a valid and current driver's license with a satisfactory driving recordSuccessfully pass a national criminal background check and motor vehicle report background checkSuccessfully pass a pre-employment drug screeningEDUCATION:High school diploma or GED equivalent requiredWORK ENVIRONMENT & PHYSICAL JOB DEMANDS:The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually quiet.The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.The employee must regularly lift and/or move between 25-50 pounds. While performing the duties of this job, the employee is regularly required to stand, walk, use hands and fingers to handle material,talk and hear. The employee is required to stoop, kneel, crouch, or occasionally crawl. The employee is occasionally required to sit.TRAVEL:Availability for travel in response to out-of-town projects and/or catastrophic events. Some out-of-area and overnight travel may be expected for training or meetings.COMPENSATION:BluSky offers a competitive hourly wage and a comprehensive benefits package that includes: a matching 401(k) plan, health insurance (medical, dental, and vision), paid time off, disability, IT equipment necessary to complete tasks (i.e. smartphone, tablet), and corporate apparel allowance.BluSky also offers extended benefits such as: Employee Assistance Program, Accident & Critical Illness Coverage, LegalShield, Professional Development, Paid Referral Program, Vendor Discounts, and more.EEOC:BluSky is dedicated to the principles of equal employment opportunity. BluSky prohibits unlawful discrimination against applicants or employees on the basis of age 40 or over, race, sex, color, religion, national origin, disability, genetic information, sexual orientation or any other applicable status protected by Federal, State or local law.It is and will continue to be the policy of BluSky that all persons are entitled to equal employment opportunity based on their individual qualifications, performance, and potential without regard for any protected status, as required by state and federal law. Application Duration: To ensure a thorough and fair selection process, we would like to inform you that the application deadline for this position is 7 days internal and 14 days external. To be considered for this position, you must complete the online application located at www.goblusky.com/careers.

$33.00/hourShift Premium may ApplyImmediately hiring! We’re looking for responsible, detailed people who are ready to accelerate their automotive repair career! Whether you have worked in an auto garage or car dealership, this job is for you! Join our team of driven professionals at Avis Budget Group enterprise.What You’ll Do:As an automotive technician, you will be responsible for conducting essential repairs on a diverse range of vehicle brands and models, requiring minimal technical oversight. Your tasks will encompass various maintenance activities such as oil changes, lubrication, tire repairs, and potentially warranty repairs based on your proficiency level. In addition, you may support our skilled mechanics in handling intricate repair procedures.Perks You’ll Get:Bi-weekly hourly wage (New York and Puerto Rico: weekly wage)On-the-job training to expand your automotive abilities and help to obtain ASE CertificatesPaid time offMedical, dental and other insuranceFlexible spending account opportunity to contribute up to $270 as a tax-free benefit for public transportation or parking expensesRetirement benefits (401k)Employee discounts, including discounted car rental and discounted prices on the purchase of Avis/Budget cars* Above perks may vary based on full-time/part-time status and locationWhat We’re Looking For:Valid Driver’s License and good driving recordAt least 2 years of auto repair experience or coursework with automotive certifications1 ASE certification (ability to acquire 2 additional ASE certifications within first year)Knowledgeable in areas covered by the ASE certification programs, including, but not limited to, Engine Repair, Drive Train/Axles, Suspension/Steering, Brakes, Electrical, Heating/Air Conditioning, Engine Performance and Light Vehicle/DieselComfortable working in a mechanical shop with moderate or loud noise levelsMust have a complete set of tools required for auto repair and maintenanceBasic computer skills including typing, data entryMust be able to lift up to 50 pounds, continuously stand, bend, reach, walk, sit and kneel frequently, enter, exit and drive vehiclesMust be 18 years of age and legally authorized to work in the United StatesThis position requires regular, on-site presence and cannot be performed remotelyPrevious Original Equipment Manufacturer (OEM) experience preferred, providing an added advantage! Who We Are Here at Avis Budget Group, you will be joining a team of 25,000 driven people, performing with purpose. Together, we’re moving the future of transportation forward with our innovative, customer-focused solutions.Our culture is performance driven, where we encourage and support each other to be at our best through leadership, training, tools, and rewards.We are proud to make a positive difference to the lives of our colleagues, customers, and communities where we operate.Avis Budget Group is an Equal Opportunity Employer – Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other category protected by applicable law. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. The compensation and benefits information is accurate as of the date of this posting.The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. This position may be with any affiliate of Avis Budget Group. Los AngelesCaliforniaUnited States of America

As an EEO/Affirmative Action Employer, all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, or veteran status. Work at a BRAND NEW state of the art facility, and receive the following benefits from day one: Relocation Assistance offered $2500 Sign On BonusBase Salary + Form of OT & Annual BonusWork independently, with lots of variety in your dayDiscretionary paid time off with Manager approval100% paid tuition for you and your familyMedical, Dental, Vision, and 401k Matching I. Job Summary Manage the Landfill Gas to Renewable Natural Gas "RNG" Facility to maximize production, while ensuring safe work practices, environmental compliance, timely maintenance, compliance with contracts, and coordination with the landfill management and operations. This role acts as a plant owner and is available whenever necessary to meet the objectives of the role and the needs of the facility. An RNG Facility takes landfill gas and converts it to a Natural Gas Quality that is injected into the pipeline for household and commercial use. The RNG Plant Manager will be required to operate and maintain equipment such as, specialty gas processing equipment, gas compressors, and H2S removal systems, Nitrogen Removal Unit, and Pressure Swing Absorber. II. Essential Duties and Responsibilities The operator will perform intermediate to advanced level Instrument and Control repair, maintenance, calibration, and troubleshooting.Capture data and evaluate course of action for optimized plant performance, while operating within identified budgets. This position also has strict requirements for safety and environmental compliance along with standard operating procedures.Must be an engaged employee with the ability to organize and manage small to large scale plant outages and projects, with attention to detail of organizational and record keeping of all maintenance reports, gas data analysis and waste stream documentation.Operate advanced instrumentation and process control systems.Leads, manages, and coordinates all 3rd party vendors or customers for scheduled plant maintenance, unscheduled down time, compliance, and well-field issues.Regularly communicates this with the Market Area Gas Operations Manager (MAGOM) and/or WMRE Operations Manager.Inspects plant machinery and equipment. Repairs, maintains, and services all equipment in accordance with the facility Standard Operating Procedures, equipment maintenance manuals, and WMRE policies and training. Must also be knowledgeable to handle non-routine repairs or issues that may arise and require sound, immediate judgment without direct supervision.Implements WM and WMRE safety policies and practices for all work activities, and ensures these practices are followed by other WM staff, vendors, contractors, and visitors entering the facility.Completes all mandatory training activities for both safety and operational training as assigned by supervisor.Procures plant supplies and replacement equipment in an efficient manner by identifying needs in advance, managing vendors, and working within WMRE guidelines as well as being responsible for the annual budget.Promptly responds to call-outs of plant shutdowns during non-business hours to identify the cause of the shutdown and rectify/diagnose through appropriate repairs or adjustments to return the plant to operation while consulting with WMRE operations managers (as needed). This role is given discretion to judge the situation and respond accordingly without management intervention, until needed.Maintains the facility spare inventory and provides a written inventory count twice annually.Completes special assignments/tasks as required by WMRE Operations Manager, Market Area Gas Operations Manager, or Landfill District Manager.Able to work as a team and communicate clearly and professionally across different business units.Ability to wear/operate assigned PPE and follow WM and WM Renewable Energy safety protocols and procedures.Work on electrical systems, DC and AC low voltage, to troubleshoot and perform minor repairs.Must be strong with basic computer skills used to communicate, document, and change operations settings for plant performance optimization. III. Qualifications The requirements listed below are representative of the qualifications necessary to perform the job. A. Education and Experience Education: High School Diploma or GED (accredited) required. Experience: 5 years of relevant work experience in a plant operations or plant maintenance environment required. B. Certificates, Licenses, Registrations or Other Requirements Administrative Services\DL NUMBER - Driver License, Valid and in State required C. Other Knowledge, Skills or Abilities Required Fundamental knowledge of computer data entry and interpretation. Must be able to successfully manage fiduciary responsibilities. Must be able to lift a minimum of 100 lbs. Must be able to travel up to 15% with overnight stays. Must be able to diagnose and repair DC circuits 12/24 volts. Basic knowledge of 120/240/480 3ph volt AC circuits. Must be able to understand complex processes and action-based thinking. Must be familiar with basic principles of building maintenance. Must be able to demonstrate industry communication skills. Preferred: • Previous RNG Operations • Gas processing or pipeline operations experience • Gas compression and gas conditioning • Controls and programming • Landfill gas collections • Automotive or Heavy Equipment technician • Refrigeration or HVAC experience • Skilled in P&ID or electrical drawing interpretation • Project management experience IV. Work Environment Combination: This job operates in a mix between an office environment and plant/field environment and routinely requires the use of standard office equipment such as computers, phones, copy machines, etc. Please be advised, advertised sign on bonuses are for external candidates only. Internal candidates are not eligible to receive a sign on bonus. Please note, this is a salaried position that is eligible for a form of overtime. The expected pay range for this on-site position across the U.S. is $81,995- $120,215.25. This range represents a good faith estimate for this position. The specific salary offered to a successful candidate may be influenced by a variety of factors including the candidate’s relevant experience, education, training, certifications, qualifications, and work location. In addition, this position is eligible for a bonus. BenefitsAt WM, each eligible employee receives a competitive total compensation package including Medical, Dental, Vision, Life Insurance and Short Term Disability. As well as a Stock Purchase Plan, Company match on 401K, and more! Our employees also receive Paid Vacation, Holidays, and Personal Days. Please note that benefits may vary by site. If this sounds like the opportunity that you have been looking for, please click "Apply".

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:Job DescriptionJob SummarySeeking a reliable Automotive Technician to join our outstanding fleet maintenance team. The Automotive Technician will be responsible for maintaining a diverse range of equipment, including delivery vehicles, heavy-duty on-road tractors, and trailers from various manufacturers. These vehicles' propulsion systems include diesel, gasoline, and alternative technologies such as compressed natural gas, liquefied natural gas, propane, hybrid, and electrical in some locations. Automotive Technicians must be skilled in troubleshooting and maintaining various systems, including hydraulic brakes, air brakes, electrical systems, and engine controls. Automotive Technicians must be willing to work 2nd?or 3rd?shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location’s need.??Automotive Technicians?must possess the required hand tools required to perform the applicable job assignment. ? Responsibilities and DutiesMeets D.O.T requirements required by job assignment Bends, stoops, squats, kneels, crouches, crawls, climbs ladders and stairs, stands, walks, and turns/pivots frequently throughout duration of workday Sits infrequently, as required,?throughout duration of workday Exercises simple hand grasping, power hand grasping, fine hand manipulation, and reaching from foot level to above shoulder level as necessary to complete assigned tasks Operates standard and manual transmission Operates power and pneumatic tools RequirementsMust have an active driver’s license issued by the state. Must be willing to work 2nd?or 3rd?shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location’s need.?? Must possess the required hand tools required to perform the applicable job assignment. ? Knowledge and SkillsCurrent documented automotive mechanical experience Experience using diagnostic equipment, scan tools and personal computer Possesses full complement of personal hand tools Dependable with ability to report to work on a regular and timely basis and complete scheduled workday on a consistent basis Available to work varying shifts, additional hours and/or overtime depending on service needs Wears personal protective equipment as required Works in an environment with variable temperatures and humidity (climatic conditions), exposure to cleaning materials, petroleum products, dust, dirt, and noise, outside inclement weather, etc. Works cooperatively in a diverse work environment Communicates effectively?through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditions Our compensation reflects the cost of labor across several US geographic markets. The starting pay for this position is $33.00 per hour. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions. Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase program.Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.Pay Range:For this union-represented posting, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions. The starting pay rate for this position starts at $33.00/hr. The company offers the following benefits for this position, subject to applicable eligibility requirements. Weekly pay, extensive training, growth opportunities, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, education assistance program, discounted employee stock purchase program.

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Shift: M-F 7:00am-3:30pm or Weekends Fri-Sun (6a-6:30p) A&P Technician II Build an Aviation Career You’re Proud Of At StandardAero, we use our ingenuity and know-how to find solutions for the simple to the most complex challenges in aviation. Together, we get the job done and done well. As an A&P Technician II, you will be responsible for performing routine maintenance and major inspections on Gulfstream corporate aircraft. What you'll do: Adjust, align, and calibrate aircraft systems, using hand tools, gauges, and test equipment.Examine and inspect engines or other components for cracks, breaks or leaks.Disassemble and inspect parts for wear, warping, or other defects.Assemble and install electrical, plumbing, mechanical, hydraulic and structural components and accessories using hand tools and power tools.Service and maintain aircraft systems by performing tasks, such as flushing crankcase, cleaning screens, greasing moving parts, and checking brakes.Repair, replace, and rebuild aircraft structures, functional components, and parts, such as wings and fuselage, rigging and hydraulic units.Read and interpret manufacturers and airline’s maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components Requirements: Must be authorized to work in the U.S.Airframe and Powerplant License required, high school diploma or equivalent required.Corporate jet experience performing scheduled and unscheduled maintenance to include: 12/24/36/72-month inspections. Preferred Characteristics: Gulfstream maintenance experience (any model GII through G550) preferredBasic knowledge of operating a personal computer or laptop.Knowledge of job-specific machines and tools, including their designs, uses, repair, and maintenance.Capable of repairing machines or systems using the needed toolsAbility to determine the kind of tools and equipment needed to do a jobAble to perform routine maintenance on equipment and determine when and what kind of maintenance is needed.Capable of determining causes of operating errors and deciding what to do about it.Able to perform tests and inspections of products, services or processes to evaluate quality or performance.Able to install equipment, machines, wiring, or programs to meet specificationsAbility to control operations of equipment or systemsAbility to use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems.Able to monitor gauges, dials or other indicators to make sure a machine is working properly. Benefits that make life better Comprehensive Healthcare401(k) with 100% company match; up to 5% vestedPaid Time Off starting on day oneBonus opportunitiesHealth- & Dependent Care Flexible Spending AccountsShort- & Long-Term DisabilityLife & AD&D InsuranceLearning & Training opportunities Salary: $35-40 per hour based on experience Raising the Standard of Excellence since 1911 With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers’ missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us. Inclusivity Is Our Standard It is StandardAero’s policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero

Overview: CONSIDER A CAREER WITH LAND ROVER SANTA FEWE HAVE THE BEST PAY IN THE MARKET AND RELOCATION ASSISTANCE!Land Rover Santa FeWe are looking to add qualified Master Automotive Technicians to our team!$10,000.00 Sign-On Bonus for Master Technicians | $5,000.00 Sign-On Bonus for Level 2 & 3 Technicians!In addition to our competitive pay, we offer our associates the following benefits:Relocation reimbursement available!**Job training and career advancement opportunitiesHealth, Dental, Vision, Life and Disability Insurance401(k) with company matchEmployee stock purchase programEmployee vehicle purchase programPerformance / longevity bonusesPaid time-offResponsibilitiesEfficient and accurate work in accordance with dealerships and factory standardsComplete system diagnostics and full automotive troubleshooting and testingMaintain an organized shop areaRoad-test vehicles to ensure quality workComply with company safety policies and proceduresCommunicate directly with service advisors regarding the status of the service workContinuously learn new technical information and techniquesAdhere to our values: Integrity, Transparency, Professionalism and TeamworkQualificationsAutomotive Technician Experience Required5-7 Years of Master Automotive Technician experience3-4 Years of Level 2 & 3 Automotive Technician experienceAutomotive technical or trade school degreeNational Institute of Automotive Service Excellence (ASE) certification(s) or certification(s) in: brakes, electrical/electronic systems or engine performance.High School Diploma or equivalentValid driver’s license in the state and good driving recordGroup 1 is a Fortune 250 company that owns and operates automotive dealerships and collision centers in the United States and United Kingdom. We offer our associates a team environment, great benefits and ongoing training and support. If you are in alignment with our values of integrity, transparency, professionalism, teamwork and respect - now might be the time for you to accelerate your career as part of the best company in automotive retail. Apply today or refer a qualified friend!All applicants must pass pre-employment testing to include: background checks, MVR, and drug testing in order to qualify for employment** Relocation Reimbursement must be approved prior to job acceptance Group 1 Automotive is an Equal Employment Opportunity EmployerIND1

BRIEF DESCRIPTION:IDGrind machinist are responsible for producing work in the most efficient manner while meeting the drawing/planning specification /requirements.Sets-up and operates grinding machines to produce parts to established blueprint and engineering specifications. Selects, mounts, attaches and calibrates a variety of attachments to grind angles, contours, lines, spheres, etc. on to surfaces. Set-ups may require blocking, aligning, and securing irregular shaped work pieces. Dress and change wheels for various finish requirements. Relies on experience and judgment to plan and accomplish assigned tasks and goals. May orient, train, assign and check the work of lower-level associates.KEY ACCOUNTABILITIES• Completes set-ups with some supervision/assistance.• Responsible for all phases of part operation set-up to achieve first article acceptance.• Perform and maintain accurate in-process quality inspection and records.• May identify and recommend process improvements that reduce part quality variation.• May improve processes, procedures, and eliminate waste.• Perform other related duties as assigned.DESIRABLE EXPERIENCE, CAPABILITIES AND SUCCESS FACTORSExperience operation set-up on CNC ID grinding equipment.Skilled in the use of indicator, gage, dial bores, and plate inspection methods for first article and in-process inspection of precision machined parts.Ability to maintain close tolerances (within .0003”) of ID’s, hold .0003 profile, roundness.Understanding of machine tool accuracies, tool offsets.Knowledge of cutting wheel feeds, speeds, and wheel life for aerospace grinding.Ability to follow verbal instructions and interpret blue print and quality requirements.Ability to communicate with employees and management in a positive manner.Ability to lift a maximum of 25 lbs (over 25 lbs with assistance).Ability to stand for long periods of time.Ideal candidate will have experience with AS9100, 5S, Lean, and Six Sigma.Per ITAR requirements you must be a US Person (US Citizen or Permanent Resident Card Holder). This position is subject to policies and procedures set forth by the State Department and applicants who do not meet such requirements will not be eligible for the position.Salary Range: $20.00 - $30.00Several factors are considered when extending an offer, including but not limited to, the role responsibilities, candidate’s work experience, skills and education.BenefitsMedical, Dental, Vision and Prescription Drug CoverageSpending accounts (HSA, Health Care FSA and Dependent Care FSA)Paid Time Off and Holidays401k Retirement Plan with Matching Employer ContributionsLife and Accidental Death & Dismemberment (AD&D) InsurancePaid LeavesTuition AssistanceAbout Regal RexnordRegal Rexnord is a $6.5B publicly held global industrial manufacturer with 30,000 associates around the world who help create a better tomorrow by providing sustainable solutions that power, transmit and control motion. The Company’s electric motors and air moving subsystems provide the power to create motion. A portfolio of highly engineered power transmission components and subsystems efficiently transmits motion to power industrial applications. The Company’s automation offering, comprised of controls, actuators, drives, and precision motors, controls motion in applications ranging from factory automation to precision control in surgical tools.The Company’s end markets benefit from meaningful secular demand tailwinds, and include factory automation, food & beverage, aerospace, medical, data center, warehouse, alternative energy, residential and commercial buildings, general industrial, construction, metals and mining, and agriculture.Regal Rexnord is comprised of three operating segments: Industrial Powertrain Solutions, Power Efficiency Solutions, and Automation & Motion Control. Regal Rexnord has offices and manufacturing, sales and service facilities worldwide. For more information, including a copy of our Sustainability Report, visit RegalRexnord.com.Equal Employment Opportunity StatementRegal Rexnord is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex/gender, sexual orientation, gender identity, age, ancestry, national origin, marital status, citizenship status (unless required by the applicable law or government contract), disability or protected veteran status or any other status or characteristic protected by law. Regal Rexnord is committed to a diverse and inclusive workforce. We are committed to building a team that represents diverse and inclusive backgrounds, perspectives, and skills. If you’d like to view a copy of the company’s affirmative action plan or policy statement, please email . If you have a disability and you believe you need a reasonable accommodation in order to search for a job opening or to submit an online application, please e-mail .Equal Employment Opportunity PostersNotification to Agencies: Please note that Regal Rexnord Corporation and its affiliates and subsidiaries ("Regal Rexnord") do not accept unsolicited resumes or calls from third-party recruiters or employment agencies. In the absence of a signed Master Service Agreement or similar contract and approval from HR to submit resumes for a specific requisition, Regal Rexnord will not consider or approve payment to any third-parties for hires made.

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Come join our team here in Simi Valley, California.Sign-On Bonus of $4,000 (paid in increments) for external hires!Expected Salary:$25.00 to $36.00 per hour (2nd shift differential $2.00 per hour)Several factors are considered when extending an offer, including but not limited to, the role responsibilities, candidate’s work experience, skills and education. Brief Description CNC Lathe Machinist experienced with Live Tooling. Works with little supervision. This position is in our Large Rod End CellKey AccountabilitiesCompletes set-ups with minimal supervision/assistance.Responsible for all phases of part operation set-up to achieve first article acceptance.Perform and maintain accurate in-process quality inspection and records.Desirable Experience and CapabilitiesAt least five (5) years experience in operation set-up on CNC Lathe equipment.Multiple Turret and Multi-Axis’s experience, Y / B Axis a plus. Skilled in the use of indicator, gage, dial bores, and plate inspection methods for first article and in-process inspection of precision machined parts.Ability to maintain close tolerances (within .0005”) of ID’s, hold .0005 profile, roundness.Knowledge of cutting tools feeds, speeds, and inserts tool life for aerospace machining.Ability to follow verbal instructions and interpret blue print and quality requirements.Ability to communicate with employees and management in a positive manner.Ability to lift a maximum of 25 lbs. (over 25 lbs. with assistance).Ideal candidate will have experience with AS9100, 5S, Lean, and Six Sigma.Per ITAR requirements you must be a US Person (US Citizen or Permanent Resident Card Holder). This position is subject to policies and procedures set forth by the State Department and applicants who do not meet such requirements will not be eligible for the position.BenefitsMedical, Dental, Vision and Prescription Drug CoverageSpending accounts (HSA, Health Care FSA and Dependent Care FSA)Paid Time Off and Holidays401k Retirement Plan with Matching Employer ContributionsLife and Accidental Death & Dismemberment (AD&D) InsurancePaid LeavesTuition AssistanceAbout Regal RexnordRegal Rexnord is a $6.5B publicly held global industrial manufacturer with 30,000 associates around the world who help create a better tomorrow by providing sustainable solutions that power,transmitand control motion. The Company’s electric motors and air moving subsystems provide the power to create motion. A portfolio of highly engineered power transmission components and subsystems efficiently transmits motion to power industrial applications. The Company’s automation offering,comprisedof controllers, drives, precision motors, and actuators, controls motion in applications ranging from factory automation to precision tools used in surgical applications.The Company’s end markets benefit from meaningful secular demand tailwinds, and include factory automation, food & beverage, aerospace, medical, data center, warehouse, alternative energy, residential and commercial buildings, general industrial, construction, metals and mining, and agriculture.Regal Rexnord is comprised of three operating segments: Industrial Powertrain Solutions, Power Efficiency Solutions, and Automation & Motion Control. Regal Rexnord has offices and manufacturing, sales and service facilities worldwide. For more information, including a copy of our Sustainability Report, visit RegalRexnord.com.Equal Employment Opportunity StatementRegal Rexnord is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex/gender, sexual orientation, gender identity, age, ancestry, national origin, marital status, citizenship status (unless required by the applicable law or government contract), disability or protected veteran status or any other status or characteristic protected by law. Regal Rexnord is committed to a diverse and inclusive workforce. We are committed to building a team that represents diverse and inclusive backgrounds, perspectives, and skills. If you’d like to view a copy of the company’s affirmative action plan or policy statement, please email . If you have a disability and you believe you need a reasonable accommodation in order to search for a job opening or to submit an online application, please e-mail .Equal Employment Opportunity PostersNotification to Agencies: Please note that Regal Rexnord Corporation and its affiliates and subsidiaries ("Regal Rexnord") do not accept unsolicited resumes or calls from third-party recruiters or employment agencies. In the absence of a signed Master Service Agreement or similar contract and approval from HR to submit resumes for a specific requisition, Regal Rexnord will not consider or approve payment to any third-parties for hires made.

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Come join our team here in Simi Valley, California.Sign-On Bonus of $4,000 (paid in increments) for external hires!Expected Salary:$23.00 to $36.00 per hour (2nd shift differential $2.00 per hour)Several factors are considered when extending an offer, including but not limited to, the role responsibilities, candidate’s work experience, skills and education. Brief Description CNC Lathe-Mill Machinist experience with Live Tooling. Works with little supervision.Key AccountabilitiesCompletes set-ups with minimal supervision/assistance.Responsible for all phases of part operation set-up to achieve first article acceptance.Perform and maintain accurate in-process quality inspection and records.Desirable Experience and CapabilitiesAt least five (5) years experience operation set-up on CNC Lathe and Mill equipment.Multiple Turret and Multi-Axis’s experience, Y / B Axis a plus. Skilled in the use of indicator, gage, dial bores, and plate inspection methods for first article and in-process inspection of precision machined parts.Ability to maintain close tolerances (within .0005”) of ID’s, hold .0005 profile, roundness.Knowledge of cutting tools feeds, speeds, and inserts tool life for aerospace machining.Ability to follow verbal instructions and interpret blue print and quality requirements.Ability to communicate with employees and management in a positive manner.Ability to lift a maximum of 25 lbs. (over 25 lbs. with assistance).Ideal candidate will have experience with AS9100, 5S, Lean, and Six Sigma.Must be a US Person per ITAR requirements (US Citizen or Permanent Resident Card HoldBenefitsMedical, Dental, Vision and Prescription Drug CoverageSpending accounts (HSA, Health Care FSA and Dependent Care FSA)Paid Time Off and Holidays401k Retirement Plan with Matching Employer ContributionsLife and Accidental Death & Dismemberment (AD&D) InsurancePaid LeavesTuition AssistanceAbout Regal RexnordRegal Rexnord is a $6.5B publicly held global industrial manufacturer with 30,000 associates around the world who help create a better tomorrow by providing sustainable solutions that power, transmit and control motion. The Company’s electric motors and air moving subsystems provide the power to create motion. A portfolio of highly engineered power transmission components and subsystems efficiently transmits motion to power industrial applications. The Company’s automation offering, comprised of controls, actuators, drives, and precision motors, controls motion in applications ranging from factory automation to precision control in surgical tools.The Company’s end markets benefit from meaningful secular demand tailwinds, and include factory automation, food & beverage, aerospace, medical, data center, warehouse, alternative energy, residential and commercial buildings, general industrial, construction, metals and mining, and agriculture.Regal Rexnord is comprised of three operating segments: Industrial Powertrain Solutions, Power Efficiency Solutions, and Automation & Motion Control. Regal Rexnord has offices and manufacturing, sales and service facilities worldwide. For more information, including a copy of our Sustainability Report, visit RegalRexnord.com.Equal Employment Opportunity StatementRegal Rexnord is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex/gender, sexual orientation, gender identity, age, ancestry, national origin, marital status, citizenship status (unless required by the applicable law or government contract), disability or protected veteran status or any other status or characteristic protected by law. Regal Rexnord is committed to a diverse and inclusive workforce. We are committed to building a team that represents diverse and inclusive backgrounds, perspectives, and skills. If you’d like to view a copy of the company’s affirmative action plan or policy statement, please email . If you have a disability and you believe you need a reasonable accommodation in order to search for a job opening or to submit an online application, please e-mail .Equal Employment Opportunity PostersNotification to Agencies: Please note that Regal Rexnord Corporation and its affiliates and subsidiaries ("Regal Rexnord") do not accept unsolicited resumes or calls from third-party recruiters or employment agencies. In the absence of a signed Master Service Agreement or similar contract and approval from HR to submit resumes for a specific requisition, Regal Rexnord will not consider or approve payment to any third-parties for hires made.

FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment