Airworthiness Inspector Sr A&Pin GAC Van NuysUnique Skills:2nd Shift positionMust be willing to support aircraft on road trips and at other sites. Able to work in an extremely fast paced environment. Must be Proficient with Computers and tablets.The compensation range for this role is: $44.13 to $48.78 per HourFinal compensation for this role will be determined by several factors including but not limited to: minimum and preferred qualifications, knowledge, skills, abilities, education, experience and location.Education and Experience RequirementsHigh School Diploma or GED required. 6 years aircraft/component inspection experience to include (3) years experience on large or mid-size aircraft. Airframe and Powerplant License required. Position Purpose:The Senior Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required. documentation properly completed and filed.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Responsible for all quality control inspections on aircraft/components in the Repair Station. . Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. . Keeps accurate, neat and legible records of the work performed on aircraft/components. . Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. . Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. . Ensures aircraft/components are airworthy prior to any flight activities. Mentors technicians on effective documentation. .Additional Functions: Accomplishes research of Aircraft Log Books and or computer maintenance programs to identify ongoing inspection programs, status of aircraft within those programs, Airworthiness Directive status, and Service Bulletin status. . Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. . Assists leads and supervisors in training of Airworthiness Inspectors. Promote high standards of quality through instruction and by setting the example. . Works with and instructs subordinate mechanics/technicians in troubleshooting and operational/functional procedures. . Signs FAA 8130-9 Statement of conformity on projects completed on his/her aircraft. . May perform ODA functions as assigned. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. Proficient in blueprint reading, use/interpretation of Maintenance Manuals, test specifications and other inspection related documentation as required. Familiar with FAA certification approval processes. Strong written and verbal communication skills. Must be able to effectively prioritize tasks. Strong computer skills. Proficient with Microsoft Word. Minimum 20 WPM typing speed. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221681Category: Quality AssurancePercentage of Travel: Up to 50%Shift: SecondEmployment Type: Full-timePosting End Date: 12/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

FM2, Lee Company’s facility maintenance and management team is looking for experienced Commercial/Industrial HVAC Technicians.Our HVAC Technicians install, repair, and maintain a variety of equipment for industrial and commercial customers including, refrigeration, air conditioning, electric motors, heating units, heat pumps, hermetic compressors, light commercial furnaces, boilers, burners, intake and exhaust fans, economizers, humidifiers, capacity controls, semi-hermetic compressors, split systems, flame safeguard controls, air compressors, air driers, chillers, and packaged units.Qualifications:5+ years of commercial and/or industrial HVAC experienceEPA certificationValid driver’s licenseAt Lee Company, you will be among the most knowledgeable and experienced HVAC experts in the country. We offer site-based positions along with competitive pay, full benefits, paid training, and opportunities for growth. If you have a desire to serve and a passion for excellence, apply today!Company Perks & Benefits:Our mission at Lee Company is to create an environment where our employees can thrive, and we mean that. Wellness involves your relationships, finances, career, community, as well as physical health. We don’t just talk the talk, we walk the walk. Check out what benefit programs we offer to help our team and family members THRIVE with us!We pay 100% of every employee’s long-term disability, life insurance, and fees associated with acquiring and maintaining a trade licenseWe offer free trade training and license exam preparation through Lee Company University (LCU), our very own NCCER accredited trade schoolWe have a company match program for 401(k) and health savings account contributionsYou earn paid time off and paid holidays for your personal well-beingYou earn rewards for your commitment to wellness and participation in initiatives through our rewards programWe offer meaningful assistance programs like Chaplain services, an on-site / mobile clinic, and an emergency assistance fundWe connect you to opportunities to make an impact through volunteering in our communitiesAnd other benefits such as health insurance, dental, vision, and short-term disabilityLee Company is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate on the basis of race, color, religion, gender, age, national origin, veteran status, disability, genetic information or testing, or family and medical leave.

Responsibilities: Oversees, plans and issues work orders to appropriate shift team members for the implementation of equipment modifications as well as preventative and any corrective maintenance.Prepares and coordinates maintenance resources and provides recommendations for capital and continuous improvement projects.Reviews the operation of equipment with appropriate personnel to identify maintenance issues in the areas of Safety, Quality, Cost, Productivity and Customer Satisfaction.Review's location’s Key Performance Indicators KPIs (Daily, Weekly and Monthly) to make recommendations for improving plant operations, OEE (Overall Equipment Effectiveness) and maintenance problem resolution.Tracks, analyzes, and improves the Maintenance department’s KPIs.Conduct routine inspections to identify and resolve issues to improve on reliability of production equipment.Develop and maintain relationships with suppliers and contractors to ensure timely and cost-effective procurement of maintenance materials and services.Engages employees in problem resolution to improve production issues/efficiencies utilizing Lean Manufacturing techniques as needed.Fosters a positive working environment and drives the Maintenance team to meet set productivity targets and performance standards.Ability to fabricate and modify equipment as necessary.Ensures all regulatory compliance with various governmental agencies such as city, county, state is met on a consistent basis.Monitors and reviews Maintenance expenses monthly.Maintain accurate records of maintenance activities, equipment manuals, and service schedules.Assists in the recruitment process of Maintenance personnel.Ensures Maintenance employees are properly trained in all aspects of their jobs. Identifies training gaps and develops training plans as needed.Performs other duties as assigned. Requirements Bachelor's degree in a related field.Possesses 5-7 years of experience in Industrial Automation, PLCs, Pneumatics, Mechanical, Electrical and Hydraulic, preferably in the Packaging Industry.Management experience in operations, maintenance, engineering and/or process improvement roles including managing teams of people.Previous experience working in a Lean environment preferred.Six Sigma Green or Black Belt Certification a plus.Exceptional leadership and proven team-building skills.Excellent analytical thinking and innovative problem-solving skills.Has the ability to multi-task, and prioritize in a fast-paced environment.Microsoft Office Proficiency: Upkeep Maintenance Software knowledge preferred.Do you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Overview: Ramona Tire & Service Centers have been serving Southern California for over 45 years with honesty and integrity. Drive over to one of our 17 convenient locations for professional automotive service and new tires at reasonable prices. Experience the difference our shops make the next time you need automotive services. Our mission is to provide the highest quality customer service available anywhere.As a General Service Technician , you will perform non-technical service repairs such as oil changes, tire and wheel related services, alignments, flushes, and more. While working alongside ASE Certified Automotive Technicians, you will get the training necessary to get to the next level in your career. If you are interested in becoming a certified ASE Automotive Technician, this is the opportunity for you. This could be the beginning of your successful career. COMPENSATION: $16-$19/HR, VARIES DEPENDING ON EXPERIENCE Principal Duties and Responsibilities: Safely transports customers to and from their place of residence or business using the company vehicle. Picks up parts, supplies, tires, etc. from vendors and/or the corporate office using the company vehicle. Operates company vehicle in a safe and courteous manner obeying all traffic laws. Conducts State Safety and Emission Inspections on vehicles in an ethical manner following all company and state guidelines. Performs tire mounting/dismounting, wheel balance and tire rotation. Performs oil changes and other basic services at the direction of the Shop Foreman or Store Manager. While performing basic services, observes general vehicle condition and points out any obvious needed repairs or safety concerns to the Shop Foreman or Store Manager. Utilizes the company's Multi-point Inspection and/or Repair Order to properly document the vehicle condition. Maintains cleanliness of the shop to include the service area, tire racks, showroom and outside the building to maintain a clean and inviting appearance. Follows all safety procedures and reports any concerns to the Shop Foreman or Store Manager. Employee Benefits: Competitive Bi-Weekly Pay Tuition Reimbursement Paid Vacation and Sick Time 6 Paid Holidays Medical, Dental and Vision Insurance (Effective 1 st of the Month after Hire) Life Insurance (Company paid) 401(k) Retirement Savings Plan with Company Match Discounted Services on Personal and Immediate Family Vehicles Opportunity for Advancement! Qualifications: Ability to work Monday-Saturday Previous automotive experience preferred, but we will consider energetic and hard-working individuals with a passion for cars. Candidates must have a high level of motivation and be able to work in a fast-paced environment. Must possess a valid driver's license; must be able to pass a pre-employment MVR and criminal background check. Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, local laws.#bayard

Our team members are at the heart of everything we do. At Cencora, we are united in our responsibility to create healthier futures, and every person here is essential to us being able to deliver on that purpose. If you want to make a difference at the center of health, come join our innovative company and help us improve the lives of people and animals everywhere. Apply today!Job Details Shift: Sunday-Thursday 12pm-8:30pm or closeUnder general supervision of the Systems Manager, responsible for supporting the effective use and functionality of the automated equipment within a fully automated Distribution Center, while mentoring technician associates. In this role, the associate must use technical knowledge and skills to diagnose electrical controls issues to a component level, which includes diagnosis of capacitors, inductors, diodes, LED, and transistors. Diagnosis will include pressure transducers, flow meters, photo voltaic sensors, bridge and full wave rectifiers. This position is responsible for programming basic changes to PLC Controllers including modifying timing, adding alarms and logic for additional inputs or outputs, properly wiring additional devices to PLC’s and other Controllers. An associate in this role will also troubleshoot communication issues with devices connected to the MHE network or other networks such as Profibus, work with device IP addressing, network switches, along with operation and diagnosis of all chill water plant systems including chillers, cooling towers, boilers, pumps, BAS, HVAC, and water treatment. Ensures effective preventative maintenance plans and schedules for all facility equipment and systems.Diagnoses Materials Handling Equipment and Automated Picking System-related error conditions occurring in the Distribution Center and repairs appropriately.Oversees any maintenance, modifications, and/or system upgrades of Materials Handling Equipment and Automated Picking System controls.Assesses the efficiency of materials handling equipment and automated picking systems and defines necessary modifications.Performs routine preventive maintenance tasks to ensure continued productivity with warehouse operations.Maintains CMMS/EAM system on repairs required and performed on equipment in the Distribution Center.Manages the inventory of spare parts.Must be willing to work extended hours, as needed, in order to meet productivity goals.Performs related duties as assigned.Education:Requires some technical vocational training, or equivalent combination of experience and education. Normally requires at least two (2) years related and progressively responsible experience; strong electrical background preferred.Skills and Knowledge:Strong technical and operational knowledge of mechanical, electrical and electronic equipment and systems. Strong aptitude for repair and maintenance activities.Ability to read and interpret CAD layouts, illustrated parts breakdown (IPB) diagrams, and electrical circuitry diagrams and drawings.Ability to diagnose and repair electrical and mechanical issues. Issues may include the testing, replacement or repair electrical systems including three phase or single phase electrical systems up to 600volts, AC or DC motors, power supplies, frequency drives, servo drives, transformers, motor starters, proximity sensors, encoders, photo eyes, programmable logic controllers (PLC), HMI’s, PLC Inputs/Outputs.Ability to test equipment and instrumentation system including electrical, pneumatic, hydraulic, refrigeration, and water treatment chemicals.Knowledge of programmable logic controllers (PLCs) preferred. Ability to read electrical schematic, wiring diagrams, and PLC ladder and block logic. Ability to load programs or configure PLC’s, HMI, scannersAbility to program basic changes to PLC controllers including modifying timing, adding alarms and logic for additional inputs or outputs. Ability to properly wire additional devices to PLC’s and other controllers.Working knowledge of computer systems and personal computers. Computer hardware experience including the installation and setup of hard drives, RAM, network cards, monitor cards, and motherboards.Computer software experience including MS office (Excel, Word, IM), MHE software such as RSLogix, Sort Director, GSMi, IPoint, Flex Sort, etc.Technical knowledge and skills include the diagnosing of electrical control issues to a component level. Component level skillset includes the diagnosing of capacitors, inductors, diodes, LED, and transistors. Ability to diagnose pressure transducers, flow meters, photo voltaic sensors, bridge and full wave rectifiers.Positions at this level are generally fully functioning specialists in a PLC/Electrical control trade area.Ability to troubleshoot communication issues with devices connected to the MHE network or other networks such as PROFIBUS, BACNET, LONWORKS, PROFINET, CAN-BUS, ASI, Etc. Skills to include an understanding of device IP addressing, network switches, etc.Ability to operate and diagnose all chill water plant systems including chillers, cooling towers, boilers, pumps , BAS, HVAC, water treatmentStrong analytical skills; ability to resolve issues effectively and efficiently. Ability to identify facilities-related maintenance problems and implement standard courses of action to resolve problems within established project timeframes and administrative and technical requirements.Technical knowledge and skills include the diagnosing of electrical Controls issues to a component level. Component level skillset includes the diagnosing of capacitors, inductors, diodes, LED, and transistors. Ability to diagnose pressure transducers, flow meters, photo voltaic sensors, bridge and full wave rectifiers.Ability to program basic changes to PLC Controllers including modifying timing, adding alarms and logic for additional inputs or outputs. Ability to properly wire additional devices to PLC’s and other Controllers.Ability to troubleshoot communication issues with devices connected to the MHE network or other networks such as Profibus. Skills to include an understanding of device IP addressing, network switches, etc.Ability to operate and diagnose all chill water plant systems including chillers, cooling towers, boilers, pumps , BAS, HVAC, water treatmentAbility to mentor other technicians.Ability to communicate effectively both orally and in writingStrong interpersonal skillsStrong organizational skills; attention to detailWhat Cencora offersWe provide compensation, benefits, and resources that enable a highly inclusive culture and support our team members’ ability to live with purpose every day. In addition to traditional offerings like medical, dental, and vision care, we also provide a comprehensive suite of benefits that focus on the physical, emotional, financial, and social aspects of wellness. This encompasses support for working families, which may include backup dependent care, adoption assistance, infertility coverage, family building support, behavioral health solutions, paid parental leave, and paid caregiver leave. To encourage your personal growth, we also offer a variety of training programs, professional development resources, and opportunities to participate in mentorship programs, employee resource groups, volunteer activities, and much more. For details, visit https://www.virtualfairhub.com/cencoraSalary Range*$56,500 - 83,270*This Salary Range reflects a National Average for this job. The actual range may vary based on your locale. Ranges in Colorado/California/Washington/NewYork/Hawaii/Vermont/Minnesota/Massachusetts/Illinois State-specific locations may be up to 10% lower than the minimum salary range, and 12% higher than the maximum salary range.Equal Employment OpportunityCencora is committed to providing equal employment opportunity without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, age, disability, veteran status or membership in any other class protected by federal, state or local law.The company’s continued success depends on the full and effective utilization of qualified individuals. Therefore, harassment is prohibited and all matters related to recruiting, training, compensation, benefits, promotions and transfers comply with equal opportunity principles and are non-discriminatory.Cencora is committed to providing reasonable accommodations to individuals with disabilities during the employment process which are consistent with legal requirements. If you wish to request an accommodation while seeking employment, please call or email . We will make accommodation determinations on a request-by-request basis. Messages and emails regarding anything other than accommodations requests will not be returned.Affiliated Companies:Affiliated Companies: AmerisourceBergen Drug Corporation

Build your best future with the Johnson Controls TeamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away! What we offerCompetitive salary starting at $56k base plus guaranteed commission and sign-on bonus with total compensation of $83kPaid vacation/holidays/sick time – 15 days of vacation, 5 sick days, 3 floating holidaysComprehensive benefits package including but not limited to; 401k, Medical, Dental and Vision care – Available day oneEncouraging and collaborative team environmentCheck us Out: A Day in a Life at Johnson Controls | Sales Roles - YouTubeWhat you will doOur Early CareerSales Engineering (BEST) Program is a 6-month technical sales development program for Recent College Graduates that focuses on creating market share by strategic selling Johnson Controls’ HVAC products and services to commercial customers. In this program you will have a chance to apply your technical engineering knowledge and business acumen to work with customers to better understand their product and project needs by being the subject matter expert. As part of the program, you will participate in a 6-month training and development program combining classroom, field orientation, and on the job training. You will learn our mechanical equipment and service offerings, customer relationship techniques and leadership skills in preparation for supporting customers in your territory alongside the sales team. You will be prepared to consult with architects, engineers, and building owners on product selections; partner with and learn from internal experts and deliver on business goals. You will be a critical part of a local sales team and a national network of sales professionals. #BEST How you will do itEstimate job bids and prepare proposals with contractors, architects and building owners Coordinate with vendors and subcontractors Complete sales calls to generate new business and build on existing relationships Present solutions to customers for consideration Collect and analyze market intelligence Turn projects over to operations team for execution and installationsWhat we look forRequired:Currently pursuing a Bachelor’s degree in a technical field (engineering, construction management, IT etc.) and graduating in December 2024 and May/June 2025. Program starts January 6, 2025 or June 9, 2025Strong analytical ability to solve problems and ability to learn quickly Ability to manage multiple projects and cross-functional teams with minimum guidance Strong communication and teamwork skills U.S. Citizenship or Permanent ResidencyPreferred:Electrical or Mechanical Engineering Degree, strongly preferred Previous sales, engineering or business experiences through co-ops, internships, part-time or full-time jobs Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Job Description SummaryActivities contributing to the design and development of products, solutions and systems. Includes activities linked to technical improvement of existing products and components Impacts approaches, projects and programs in the functional area or affected business organization and ways of working. Impacts quality, efficiency and effectiveness of own team. Has significant input into priorities. Guided by professional practices and policies that are shaped by the role. The role has moderate autonomy, requiring high levels of operational judgment.The Lead Mechanical Engineer - Flight Test demonstrates leadership in communicating business goals, programs, and processes for an area or business segment. In this role you will utilize your experience or expertise to solve problems, develop and execute objectives for self and others, and have the ability to effect short-term and some long-term business goals.Job DescriptionRoles and ResponsibilitiesResponsible for all activities related to the mechanical design of pylon, test enabling hardware, and aircraft modification.Execute the design, analysis, or evaluation of assigned projects using sound engineering principles and adhering to business standards, practices, procedures, and product / program requirementsProvide technical leadership to personnel supporting the assigned projectDocument technical data generated by the assigned project consistent with engineering policies and proceduresProvide timely communications on significant issues or developmentsParticipate on teams assigned to address organizational initiatives and generic issuesParticipate as a presenter or reviewer in technical and program reviewsAssure proper documentation of technical data generated for the assigned projects and/or tasks consistent with engineering policies and proceduresCoach less experienced team membersRequired QualificationsBachelor’s degree in engineering from an accredited university or collegeAt least 5 additional years of experience in Engineering positionAbility and willingness to work flexible and off-shift hours (including 1st, 2nd, 3rd shift, nights, weekends, and holidays) when business needs dictate.Ability and willingness to travel to and support operations at offsite locations when business needs dictate.Ability and willingness to fly aboard an experimental aircraft including participation in development flight tests.Able to obtain and maintain FAA Class-3 medical certificate or equivalent.Familiarity with Teamcenter and NX applicationDesired CharacteristicsStrong oral and written communication skills.Strong interpersonal and leadership skills.Ability to influence others and lead small teams.Lead initiatives of moderate scope and impact.Ability to coordinate several projects simultaneously.Effective problem identification and solution skills.Proven analytical and organizational ability.Familiarity with flight test operation and airframe/propulsion system integrationFamiliarity with jet engine (turbomachinery) and nacelle designFamiliarity with aircraft structures and systems design and analysisExperience using AutoCAD, Unigraphics, or equivalent for drafting/modelingExperience with structural dynamics, loads and stress analysis.Experience in design, analysis, manufacturing and integration of structures, low and high-pressure fluid systems and pneumatic systems in an aerospace environmentKnowledge of fabrication and manufacturing processes and methodsAbility to obtain and maintain a U.S. DoD Security Clearance.The base pay range for this position is $99,900 - $133,200. The specific pay offered may be influenced by a variety of factors, including the candidate’s experience, education, and skill set. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/commission based on the plan. This posting is expected to close on 8/27/2024.Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling, and referral services. Retirement benefits include the GE Retirements Savings Plan, a tax-advantages 401(K) savings opportunity with the company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, adoption assistance, paid parental leave, disability insurance, life insurance and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. This role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government.Additional InformationGE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is anEqual Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

Promotes workplace efficiency and profitability through the maintenance, inspection and repair of facility, equipment and machinery. Do you love. . . ensuring efficiency by maintaining the quality of equipment and machinery Are you energized. . . by sharing your expertise to help others problem solve Do you enjoy. . . working as a team to accomplish a common goal **Hiring for:Tuesday - Saturday, 5:00PM - 1:30AM**Start of pay range is $23.15 + $2.00 shift premium for Weekend ShiftACCOUNTABILITIESEFFECTIVE INSPECTION AND REPAIR OF EQUIPMENTDaily inspection and repair of all conveyor systems and strappersRoutine inspection, preventative maintenance and maintenance of air compressors, compactors, boilers and cardboard conveyorRegular maintenance and repair on all housekeeping, power and material handling equipmentPerform inspection and repair of fire protection equipmentQUALITY MAINTENANCE AND UPKEEP OF FACILITYPerform minor electrical/plumbing repairs, painting and office furniture movesRoutine maintenance of heating and air conditioning unitsMaintain lighting throughout the facilitySort/stack/load pallets, cardboard, aluminum, steel and light bulbs for recyclingSet up/take down meeting roomsUpkeep of yard area, fence repair, snow removal/saltingEFFECTIVELY COMMUNICATE WITH TEAM MEMBERS AND OUTSIDE VENDORS TO ACHIEVE A COMMON GOALAssist outside contractors to perform various dutiesPromptly answer calls for jams, malfunctions or other maintenance-related issuesQUALIFICATIONSREQUIREDBasic knowledge of mechanical, electrical, plumbing and HVAC equipmentComply with all MSDS standards and lock out/tag proceduresAbility to climb ladders and run all power equipmentAbility to work with minimal supervisionMust provide own basic set of toolsAbility to use cleaning/disinfecting solutions, oil and equipment according to MSDS procedureAdhere to company policies and proceduresBasic math and reading skills and legible handwritingAbility to work as part of a team and interact effectively with othersAbility to perform tasks consistently and accuratelyRegular attendanceSPECIAL REQUIREMENTSPhysical activity may include time standing/walking up to eight hours with scheduled breaks. Ability to work in a multi-level environment, including climbing stairs, bending, twisting, stepping, stooping, reaching, lifting and pushing on a frequent basisAbility to lift up to 60 pounds on a frequent basis and 100 pounds on occasion with assistanceMay be required to take a drug screenPay Range: $0.00 -Kohl’s offers a variety of benefits to associates depending on full-time/part-time status and work hours, including: WORK LIFE BALANCE (PTO, Vacation Buy Program, Parental Leave), HEALTH & WELLNESS (Medical, Dental, Vision and other short and long term disability programs, Emergency health and wellness programs such as Accident Protection Plans, Critical Illness Plans and more), SAVINGS & RETIREMENT BENEFITS (401k, Flexible Spending Accounts and associate discount programs with Kohl’s partners), INSURANCE PROGRAMS (Life Insurance for you, your family or your pet, as well as other protection programs), and LIFE EVENTS (Legal and adoption assistance benefits).

Starting Hourly Rate $22.45 USD per hourPay is based on several factors which vary based on position. These include labor markets and in some instances may include education, work experience and certifications. In addition to your pay, Target cares about and invests in you as a team member, so that you can take care of yourself and your family. Target offers eligible team members and their dependents comprehensive health benefits and programs, which may include medical, vision, dental, life insurance and more, to help you and your family take care of your whole selves. Other benefits for eligible team members include 401(k), employee discount, short term disability, long term disability, paid sick leave, paid national holidays, and paid vacation. Find competitive benefits from financial and education to well-being and beyond at .About us:Working at Target means helping all families discover the joy of everyday life. We bring that vision to life through our values and culture. .A role in a Supply Chain Facility means being on the very front lines of getting products to the guest as fast as possible, a critical differentiator, and one of the most essential Logistics functions. You will reach beyond the bounds of your team to collaborate across the enterprise and find solutions to support the business. Whether it is through focusing on our regional or upstream distribution centers, import warehouses, or fulfillment and flow centers, you will have a chance to positively affect thousands of fellow team members and Target guests worldwide, further differentiating Target from all the rest.As a Facility Attendant 1, you will perform a wide variety of minor maintenance tasks in addition to all other duties as assigned pertaining to the general upkeep and maintenance of the Distribution Center. This includes, for example:Support Maintenance Technicians in performing mechanical preventative and corrective maintenance throughout the facility, such as servicing and repair of hand tools and minor floor machines.Act as a Qualified Electrical Assistant for electrical safety processes.Support maintenance personnel in installation/removal of assorted items of equipment throughout the facility.Evaluate and inspect the interior/exterior of the facility to determine general upkeep or repair requirements.Change PIT (Powered Industrial Truck) batteries, perform preventative and corrective maintenance on batteries, keep battery equipment clean and painted, keep battery-changing records, and turn in records at shift end.Complete maintenance, cleaning, and troubleshooting of Label Tec PrintersOperate hand and power tools such as drills, saws, sanders, grinders, pneumatic tools, and welders.Construct or repair assets within the facility such as assembling furniture, building shelving or racks, and repairing workbenches utilizing skilled carpentry, welding, and fabrication as required.Complete plumbing tasks such as installation or repairing of faucets and landscape sprinklers, clean stopped drains and clean sumps and drains as required.Perform tasks such as painting and drywall repairs, concrete patching, or minor concrete replacement.Assist in all duties related to the preventive maintenance programs, such as pest control, HVAC, and update records associated with these programs.Remove cardboard bales from bailers, remove trash from buildings using large portable dumpsters, and keep building grounds in a neat and orderly manner.Operate snow removal equipment to clean all walks, roads, and parking lots as assigned.Drive Target owned vehicles to execute yard cleanup, respond to yard incidents, escort vendors, and pick up parts and materials as required.Operate all power equipment in a safe manner, always use safe lifting techniques, and promptly assist in spill cleanup to avoid risk of accidents to team members throughout the facility.Complete necessary paperwork or requisitions for materials as requested, keep daily work order logs for all workUtilize handheld devices and mobile apps to create and close Work Orders with appropriate data (labor hours, downtime, problem/cause/remedy, and parts used)Follow appropriate safety procedures and use Personal Protective Equipment (PPE) while maintaining equipment (Lock Out/Tag Out, Arc Flash, etc.), and ensure a safe work environment by eliminating safety hazards Core responsibilities of this job are described within this job description. However, job duties may change at any time due to business needs.Physical Demands (must be able to perform with or without reasonable accommodation):Lift and carry merchandise weighing up to 47 lbs. regularly, and up to 60 lbs. on an infrequent basis Move about within and around the site with great frequency (up to 10-12 hours per shift)Work in various temperature-controlled environments including temperatures below freezing (Food Distribution Center only)Work in conditions that may include small spaces, dust, fumes/odors, hot/cold temperatures, inside/outside noise, vibration, standing on concrete for long hours and wet or uneven surfacesAccess all areas of the Distribution Center, including the ability to travel on conveyor crossovers and reach mezzanine platforms Have full manual dexterity in both hands and wrists, eye/hand coordination, feet (e.g., operating foot pedals), manual (e.g., picking, pinching, holding, grasping), and wrist motion (repetitive flexion/rotation)About you: Possess or ability to obtain a valid driver’s licenseWork both independently and in a team environmentEffective communication skillsAccurately uses basic math skillsAble to be certified to operate all power equipmentAble to use maintenance tools; saws, drills, etc.Able to read and comprehend labels, tickets, instructions, etc.Able to work with minimal supervision and self-motivateAmericans with Disabilities Act (ADA)In compliance with state and federal laws, Target will make reasonable accommodations for applicants with disabilities. If a reasonable accommodation is needed to participate in the job application or interview process, please reach out to candidate.accommodations@HRHelp.Target.com.Target will consider for employment qualified applicants with criminal histories in a manner consistent with the San Francisco, City of Los Angeles, and County of Los Angeles Fair Chance Ordinances, and CA state law.

Our warehouse operations make sure that products are properly received, selected and delivered to our stores for our ever-growing number of customers to enjoy. Our Maintenance Teams help to make sure we can keep the operation running smoothly, and they're comprised of hardworking, dedicated individuals who are willing to work in both ambient and temperature-controlled areas as needed. A thorough and comprehensive safety program and ongoing skills training provide the resources our Maintenance Team members need to be successful. Position Type: Full-Time Average Hours: 40-50 hours per weekStarting Wage: $34.75 per hour Wage Increases: Year 2 - $36.25 | Year 3 - $37.75 | Year 4 - $38.75 | Year 5 - $38.75 Duties and Responsibilities: Must be able to perform duties with or without reasonable accommodation.• Develops and implements solutions to technical and facility related problems.• Cooperates and interacts effectively through ongoing communication and exchange of information with relevant personnel related to maintenance matters.• Maintains and implements preventative maintenance programs and consults with the warehouse management team regarding maintenance needs, safety concerns and sanitation issues. • Provides input to the warehouse management team regarding changes to improve the operation. • Communicates appropriately with warehouse management, staff and third parties on any maintenance related issues. • Performs general cleaning duties to achieve warehouse appearance standards and safety requirements.• Performs routine maintenance on the warehouse building interior and exterior.• Contacts and schedules vendors and contractors for necessary warehouse building repairs and emergencies that are outside the scope of routine maintenance.• Maintains a schedule of when maintenance has been performed and when next service is due by utilizing an effective personal organization method.• Maintains confidentiality and privacy of company sensitive data.• Assists warehouse management in achieving budgeted goals.• Performs all assigned tasks, accurately, efficiently, and within company policy and procedures. • Follows the ergonomic program according to established procedures.• Operates equipment according to safety guidelines in performance of essential job functions.• Notifies management regarding product quality, safety concerns, and sanitation issues.• Other duties as assigned.Job-specific Competencies: Knowledge/Skills/Abilities• Consistently demonstrates the Mindsets, ALDI Acts Competencies and Professional Skills (M.A.P.) as outlined for the role.• Provides prompt and courteous customer service.• Develops and maintains positive relationships with internal and external parties.• Ability to interpret and apply company policies and procedures.• Excellent verbal and written communications needed.• Gives attention to detail and follows instructions.• Ability to work both independently and within a team environment. Education and Experience:• High School Diploma or equivalent preferred. • Or a combination of education and experience providing equivalent knowledge. Physical Requirements:• Frequently required to lift up to 45 pounds at various heights.• Frequently required to sit, stand, bend, reach, grip, push, pull, lift, carry and walk throughout the warehouse. • Continuously work in varying temperatures, hot and cold (including outdoor temperatures and refrigerator/freezer environments).• Ability to safely and properly operate powered industrial equipment. ALDI offers competitive wages and benefits, including:401(k) PlanCompany 401(k) Matching ContributionsEmployee Assistance Program (EAP)PerkSpot National Discount Program In addition, eligible employees are offered:Medical, Prescription, Dental & Vision InsuranceGenerous Vacation Time & 7 Paid HolidaysUp to 6 Weeks Paid Parental Leave at 100% of payUp to 2 Weeks Paid Caregiver Leave at 100% of payShort and Long-Term Disability InsuranceLife, Dependent Life and AD&D InsuranceVoluntary Term Life InsuranceALDI is committed to equal opportunity for all employees and applicants. As a proud Equal Opportunity Employer (EOE), we do not discriminate based on race, color, national origin, ancestry, citizenship status, religion, sex, sexual stereotyping, sexual orientation, gender, gender identity, gender expression, age, marital status, mental or physical disability, medical condition, genetic information, military or veteran status, pregnancy (which includes pregnancy, childbirth, and medical conditions related to pregnancy, childbirth, or breastfeeding), or any other protected characteristic. Employment may be contingent upon ALDI's receipt of an acceptable and job-related drug test, motor vehicle report, and/or reference check, as applicable and permissible by law.

RS Avionics Electrical Technician IIin GAC Van NuysUnique Skills:Day Shift - Van NuysThe compensation range for this role is:$35.19 - 38.90 per HourFinal compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and locationEducation and Experience RequirementsHigh School Diploma or GED required. Four (4) years experience in an avionics/electrical career field. or two (2) years of accredited schooling in aviation electronics and two (2) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC preferred. Other NCATT preferred. Position Purpose:Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems. Demonstrates the skills and knowledge required. to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Performs and complies with engineering changes and modifications as required. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection. Tests and maintains test equipment, electronic systems, and components. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. Adapt to sudden schedule changes.Additional Functions: In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. Ability to read and interpret basic blueprints and schematic diagrams. Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written. Must be able to climb stairs and ladders, work in confined areas and lift up to 50 pounds. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221481Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 08/30/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Responsibilities:Follow, without exception, all work instructions and safety policies, including use of all PPE and safety equipmentExamine machine controls to install plate changeovers and start up machines for production needs when requiredPerform routine preventive maintenance checks on all production equipment and machineryRepair basic mechanical components and replace parts on machines such as bearings, filters, wiring, valves, gauges and switchesObserve and listen to mechanical devices in operation to locate causes of problemDismantle devices to gain access to and remove defective partsAdjust functional parts of devices and control instrumentsInspect used parts to determine changes in dimensional requirementsLubricate and clean machinery and support equipment to maintain housekeeping and preventive maintenance standards within the plantDocument and track changeover times and recordAccomplish all work orders to maintain safety; reduce downtime; decrease scrap; improve quality production; and improve plant efficiencyFollows all safety rules and procedures including Lockout/Tagout program, housekeeping, and 5S standards and observes the operations to ensure a safe work environmentPerform other related duties as assigned Requirements:High School Diploma or GED3-5 years experience in a maintenance of Can Assembly Presses within a manufacturing environment; or an equivalent combination of training and experienceMaintenance and repair of waxers, scroll shears and Cone Top presses.Electrical ExperienceAbility to interpret documents such as procedure manuals, blueprints, schematics, charts, diagrams, etc.Ability to use precision measuring devices including amp meters, electric meters, and hydraulic gaugesBasic understanding of systems, equipment and schematicsAbility to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Good troubleshooting skillsBasic mathematical skills used to add, subtract, multiply, divide, and use decimals and fractionsAbility to perform work in a mature and professional manner, demonstrate personal responsibility, and perform all assigned dutiesDo you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Overview: Ramona Tire & Service Centers have been serving Southern California for over 45 years with honesty and integrity. Drive over to one of our 17 convenient locations for professional automotive service and new tires at reasonable prices. Experience the difference our shops make the next time you need automotive services. Our mission is to provide the highest quality customer service available anywhere.The Automotive Technician is responsible for effectively and efficiently diagnosing and repairing customer vehicles while adhering to the MAP guidelines and in accordance with dealership, manufacturers, and our company standards. COMPENSATION : VARIES FROM $75,000 - $95,000 PER YEAR, DEPENDING ON EXPERIENCE Principal Duties and Responsibilities: Diagnoses vehicles according to the appropriate level of certifications/experience. Performs work as outlined on the Multi-point Inspection and/or Repair Order with efficiency and accuracy. Explains technical diagnosis and needed repairs to non-mechanical individuals which may include the Store Manager, Service Consultants and/or customers. Recommends services that are necessary to keep the customer's vehicle in running condition; properly documents all recommendations in customer file. Follows all safety procedures and reports any concerns to the Shop Foreman or Store Manager. Maintains appropriate ASE certifications and renewals of expiring certifications. Employee Benefits: Competitive Bi-Weekly Pay Tuition Reimbursement Paid Vacation and Sick Time 6 Paid Holidays Medical, Dental and Vision Insurance (Effective 1 st of the Month after Hire) Life Insurance (Company paid) 401(k) Retirement Savings Plan with Company Match Discounted Services on Personal and Immediate Family Vehicles Opportunity for Advancement! Qualifications: Prefer a minimum of one unexpired ASE or equivalent experience or training. Have valid driver's license or obtain a valid driver's license within 30 days of hire date. Ability to work Mondays - Saturdays. Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.#bayard

Aircraft Technician Sr A&Pin GAC Van NuysUnique Skills:Van Nuys 4th ShiftThe compensation range for this role is:$39.38 - 43.53 per Hour Final compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and location.Education and Experience RequirementsHigh School Diploma or GED required. 4 years Aviation Maintenance experience to include 3 years of experience working on mid/large size aircraft required.. Corporate aircraft experience preferred.. Other FAA Airframe and Powerplant Mechanic Certificate required. Valid Driver’s License required. Position Purpose:Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time. Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting. . Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operate and supervise use of special support equipment used in removal and installations of major components. Coordinate movement of aircraft as required. . Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components. . Coordinate with other departments to arrange for the overhaul or repair of customer property as needed.Additional Functions: Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers. . Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221439Category: Service CenterPercentage of Travel: Up to 25%Shift: Weekend DaysEmployment Type: Full-timePosting End Date: 09/30/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Responsibilities:Follow, without exception, all work instructions and safety policies, including use of all PPE and safety equipmentExamine machine controls to install plate changeovers and start up machines for production needs when requiredPerform routine preventive maintenance checks on all production equipment and machineryRepair basic mechanical components and replace parts on machines such as bearings, filters, wiring, valves, gauges and switchesObserve and listen to mechanical devices in operation to locate causes of problemDismantle devices to gain access to and remove defective partsAdjust functional parts of devices and control instrumentsInspect used parts to determine changes in dimensional requirementsLubricate and clean machinery and support equipment to maintain housekeeping and preventive maintenance standards within the plantDocument and track changeover times and recordAccomplish all work orders to maintain safety; reduce downtime; decrease scrap; improve quality production; and improve plant efficiencyFollows all safety rules and procedures including Lockout/Tagout program, housekeeping, and 5S standards and observes the operations to ensure a safe work environmentPerform other related duties as assigned Requirements:High School Diploma or GED3-5 years experience in a maintenance of Can Assembly Presses within a manufacturing environment; or an equivalent combination of training and experienceMaintenance and repair of waxers, scroll shears and Cone Top presses.Electrical ExperienceAbility to interpret documents such as procedure manuals, blueprints, schematics, charts, diagrams, etc.Ability to use precision measuring devices including amp meters, electric meters, and hydraulic gaugesBasic understanding of systems, equipment and schematicsAbility to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Good troubleshooting skillsBasic mathematical skills used to add, subtract, multiply, divide, and use decimals and fractionsAbility to perform work in a mature and professional manner, demonstrate personal responsibility, and perform all assigned dutiesDo you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Sheetmetal Technician IIin GAC Van NuysUnique Skills:Van NuysFirst shift roleThe compensation range for this role is: $28.05 to $31.00 per HourFinal compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and location.Education and Experience RequirementsHigh School Diploma or GED required. 2 years experience of sheetmetal and/or fabrication experience. Valid Driver’s License required. Position Purpose:The Sheetmetal Technician II works under general supervision to safely layout, fabricate and install parts, equipment and fabricated items on aircraft following established operating procedures. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Safely perform sheet-metal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft under general supervision. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications. Use blueprints to cut and form plastics and follow standard operating procedures when using adhesives, sealants and solvents. Utilizing proper tooling, shape and form complex angles and configurations according to blueprint specifications or written/verbal information. Safely operate shop equipment such as: brakes, presses, riveting equipment, shears, and hand tools associated with sheet-metal functions. Use the proper hardware for various sheetmetal applications. Comply with all safety, 5S, and housekeeping policies. Use personal protective equipment as required. Ensure aircraft interior is protected (PTP). Assist in monthly 5S audits. Use the material tracking system to create parts demand, track squawks and to sign-off work. Assist in developing initiatives to meet individual OGSM requirements, as required.Additional Functions: Participate in continuous improvement activities (e.g. YIAW, Kaizen events, etc.). . Properly use and maintain company-provided tools and equipment and returns items to tool room after use. . Ensure standard operating procedures are followed when operating ground support equipment. . Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. . Ensure accurate daily job charging to the aircraft. . Exchange job related information and coordinate work activities between shifts through turn over report meetings and direct contact with leadership. . Assist in maintaining shop equipment and associated JSAs. .Perform other duties as assigned.Other Requirements: A working knowledge of sheet-metal installation and fabrication processes (measuring, cutting, bending, forming, and drilling of aluminum sheet stock, angle and honeycomb) is required. Ability to read and interpret blueprints and engineering documentation. Valid drivers license required. to operate towing and other Gulfstream transportation equipment. Ability to read, write, speak, and understand the English language. Able to use tools and equipment associated with sheetmetal installation and fabrication work. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must have a good working knowledge of computers and experience working with Microsoft Office suite. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221323Category: OperationsPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 08/02/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Responsibilities:Follow, without exception, all work instructions and safety policies, including use of all PPE and safety equipmentExamine machine controls to install plate changeovers and start up machines for production needs when requiredPerform routine preventive maintenance checks on all production equipment and machineryRepair basic mechanical components and replace parts on machines such as bearings, filters, wiring, valves, gauges and switchesObserve and listen to mechanical devices in operation to locate causes of problemDismantle devices to gain access to and remove defective partsAdjust functional parts of devices and control instrumentsInspect used parts to determine changes in dimensional requirementsLubricate and clean machinery and support equipment to maintain housekeeping and preventive maintenance standards within the plantDocument and track changeover times and recordAccomplish all work orders to maintain safety; reduce downtime; decrease scrap; improve quality production; and improve plant efficiencyFollows all safety rules and procedures including Lockout/Tagout program, housekeeping, and 5S standards and observes the operations to ensure a safe work environmentPerform other related duties as assigned Requirements:High School Diploma or GED3-5 years experience in a maintenance of Can Assembly Presses within a manufacturing environment; or an equivalent combination of training and experienceMaintenance and repair of waxers, scroll shears and Cone Top presses.Electrical ExperienceAbility to interpret documents such as procedure manuals, blueprints, schematics, charts, diagrams, etc.Ability to use precision measuring devices including amp meters, electric meters, and hydraulic gaugesBasic understanding of systems, equipment and schematicsAbility to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Good troubleshooting skillsBasic mathematical skills used to add, subtract, multiply, divide, and use decimals and fractionsAbility to perform work in a mature and professional manner, demonstrate personal responsibility, and perform all assigned dutiesDo you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Master Aircraft Technician A&Pin GAC Van NuysUnique Skills:This position is hiring for first and second shiftVan NuysThe compensation range for this role is:$44.13 to $48.78 per HourFinal compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and location.Education and Experience RequirementsHigh School Diploma or GED required. 8 years Aviation Maintenance experience to include 4 years of experience working on Gulfstream mid/large size aircraft required. Corporate aircraft experience preferred. Other FAA Airframe and Powerplant Mechanic Certificate required. Valid Driver’s License required. Position Purpose:Expert Aircraft Technician that works independently and in a leadership role as necessary to perform a variety of aircraft mods and mtc functions. Technical expert on in-service aircraft and perform repairs on installations that require a high degree of accuracy and timeliness. Function independently on a team and in a leadership role when required.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform required. periodic mtc and necessary servicing of all acft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time . Provide work direction for assigned techs. Promote high standards of quality through instruction and example . Act on behalf of lead in their absence and assume duties and responsibilities (to include leading team meetings) when assigned . Coordinate with inspection to ensure compliance with internal and FAA inspection and documentation requirement . Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely . Follow SOPs and JSAs when operating GSE. Operate and supervise use of special support equipment in removal and installation of major components . Coordinate movement of aircraft as required. Act as mentor and assist in training new employees in CMPs, maintenance manuals, SRMs, IPC usage, flight test installations, Solumina, RS compliance records, and all maintenance of major components. Sign off OJT records as required. Coordinate with other departments to arrange for the overhaul or repair of customer property as needed . Participate in SMS, including investigations and participation in Site Safety Council . Assist or lead problem solving initiatives and process implementation. Support Lean activities . Assist in problem solving to establish or correct planning methods for aircraft projects by utilizing standard techniques, procedures, and criteria . Assess strengths and weaknesses of assigned members. Provide diverse learning opportunities . Maintain a current knowledge of industry standards, vendor information, and all other procedures, pubs, and a general knowledge pertaining to product support maintenance . Assist in maintaining work schedules . Maintain current knowledge of warranty and parts programs to ensure proper processes are followed . Identify risk and recommend mitigation options to leadership .Additional Functions: Use material tracking system to create parts demand and charge labor to correct work orders and item numbers. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean . Implement and apply Lean/CI processes to all areas of responsibility . Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. In support of aircraft cert and final phase testing, may include flight tests on aircraft .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Advanced knowledge of FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221113Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 08/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Responsibilities:Follow, without exception, all work instructions and safety policies, including use of all PPE and safety equipmentExamine machine controls to install plate changeovers and start up machines for production needs when requiredPerform routine preventive maintenance checks on all production equipment and machineryRepair basic mechanical components and replace parts on machines such as bearings, filters, wiring, valves, gauges and switchesObserve and listen to mechanical devices in operation to locate causes of problemDismantle devices to gain access to and remove defective partsAdjust functional parts of devices and control instrumentsInspect used parts to determine changes in dimensional requirementsLubricate and clean machinery and support equipment to maintain housekeeping and preventive maintenance standards within the plantDocument and track changeover times and recordAccomplish all work orders to maintain safety; reduce downtime; decrease scrap; improve quality production; and improve plant efficiencyFollows all safety rules and procedures including Lockout/Tagout program, housekeeping, and 5S standards and observes the operations to ensure a safe work environmentPerform other related duties as assigned Requirements:High School Diploma or GED3-5 years experience in a maintenance of Can Assembly Presses within a manufacturing environment; or an equivalent combination of training and experienceMaintenance and repair of waxers, scroll shears and Cone Top presses.Electrical ExperienceAbility to interpret documents such as procedure manuals, blueprints, schematics, charts, diagrams, etc.Ability to use precision measuring devices including amp meters, electric meters, and hydraulic gaugesBasic understanding of systems, equipment and schematicsAbility to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Good troubleshooting skillsBasic mathematical skills used to add, subtract, multiply, divide, and use decimals and fractionsAbility to perform work in a mature and professional manner, demonstrate personal responsibility, and perform all assigned dutiesDo you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Sign on bonus eligibleAircraft Technician Sr A&Pin GAC Van NuysUnique Skills:Van NuysDay shift and 5th shift openingsThe compensation range for this role is:$39.38 - 43.53 per Hour Final compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and location.Education and Experience RequirementsHigh School Diploma or GED required. 4 years Aviation Maintenance experience to include 3 years of experience working on mid/large size aircraft required.. Corporate aircraft experience preferred.. Other FAA Airframe and Powerplant Mechanic Certificate required. Valid Driver’s License required. Position Purpose:Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time. Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting. . Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operate and supervise use of special support equipment used in removal and installations of major components. Coordinate movement of aircraft as required. . Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components. . Coordinate with other departments to arrange for the overhaul or repair of customer property as needed.Additional Functions: Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers. . Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221059Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 07/26/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Sign on bonus eligibleAircraft Technician Sr A&Pin GAC Van NuysUnique Skills:Van NuysDay shift and 5th shift openingsThe compensation range for this role is:$39.38 - 43.53 per Hour Final compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and location.Education and Experience RequirementsHigh School Diploma or GED required. 4 years Aviation Maintenance experience to include 3 years of experience working on mid/large size aircraft required.. Corporate aircraft experience preferred.. Other FAA Airframe and Powerplant Mechanic Certificate required. Valid Driver’s License required. Position Purpose:Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time. Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting. . Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operate and supervise use of special support equipment used in removal and installations of major components. Coordinate movement of aircraft as required. . Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components. . Coordinate with other departments to arrange for the overhaul or repair of customer property as needed.Additional Functions: Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers. . Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221059Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 07/26/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Sign on bonus eligibleAvionics Electrical Technician Srin GAC Van NuysUnique Skills:Day Shift and 5th Shift role in Van NuysThe compensation range for this role is:$39.38 to $43.53 per Hour Final compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and location.Education and Experience RequirementsHigh School Diploma or GED required. 6 years Six (6) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and four (4) years related experience. A & P license, FCC license or NCATT certification preferred. Position Purpose:Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and leadership by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Demonstrates the knowledge and leadership skills required. to fill in for the team leader thus ensuring that the company goals of Safety and Quality are enforced all times while adhering to daily work plans to maintain schedule requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates superior technical skills and expertise in avionics and acft systems operational testing and troubleshooting. Provides direct training to personnel to support company cross-training goals while ensuring a safety conscience, quality oriented, skilled workforce. Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems. Demonstrates the skills and knowledge required. to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Oversees the performance and compliance with engineering changes and modifications as required. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. Demonstrates through diligent compliance the importance of maintaining daily logs and other paperwork. Ensures that all work performed on the acft is properly and completely documented . As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time. Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required. Enforces the company FOD program, tool control program, 5-S program and all safety regulations. Adapts to sudden schedule changes. Coordinates with other disciplines concerning projects.Additional Functions: Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. . Self inspection capability for all avionics testing functions in applicable areas. . In support of acft certification and final phase testing, may include flight tests on acft as required. .Perform other duties as assigned.Other Requirements: Preferred proficiency in the operation and troubleshooting of other acft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. APU run qualification and engine run qualification preferred. Ability to read and interpret basic blueprints and schematic diagrams. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 220947Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 07/19/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Aircraft Technician Sr A&Pin GAC Van NuysUnique Skills:Sign on bonus eligibleVan Nuys - Weekend Day ShiftThe compensation range for this role is:$39.38 - 43.53 per Hour Final compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and location.Education and Experience RequirementsHigh School Diploma or GED required. 4 years Aviation Maintenance experience to include 3 years of experience working on mid/large size aircraft required.. Corporate aircraft experience preferred.. Other FAA Airframe and Powerplant Mechanic Certificate required. Valid Driver’s License required. Position Purpose:Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time. Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting. . Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operate and supervise use of special support equipment used in removal and installations of major components. Coordinate movement of aircraft as required. . Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components. . Coordinate with other departments to arrange for the overhaul or repair of customer property as needed.Additional Functions: Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers. . Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 218711Category: Service CenterPercentage of Travel: Up to 25%Shift: Weekend DaysEmployment Type: Full-timePosting End Date: 04/30/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Avionics Electrical Technician IIin GAC Van NuysUnique Skills:Day Shift - Van NuysThe compensation range for this role is:$35.19 - 38.90 per HourFinal compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and location.Education and Experience RequirementsHigh School Diploma or GED required. Four (4) years experience in an avionics/electrical career field. or two (2) years of accredited schooling in aviation electronics and two (2) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC preferred. Other NCATT preferred. Position Purpose:Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems. Demonstrates the skills and knowledge required. to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Performs and complies with engineering changes and modifications as required. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection. Tests and maintains test equipment, electronic systems, and components. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. Adapt to sudden schedule changes.Additional Functions: In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. Ability to read and interpret basic blueprints and schematic diagrams. Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written. Must be able to climb stairs and ladders, work in confined areas and lift up to 50 pounds. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 220946Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 07/19/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Sheetmetal Technician Srin GAC Van NuysUnique Skills:Must have strong aircraft modification and sheetmetal skillsMust be available to work any shiftThe compensation range for this role is: $35.20 to $38.90 per HourFinal compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and location.Education and Experience RequirementsHigh School Diploma or GED required. 4 years of sheetmetal and/or fabrication experience. Experience in aerospace industry preferred.. Valid Driver’s License required. Position Purpose:The Sheetmetal Technician Senior works under minimal supervision to safely lay-out, fabricate and install parts equipment and fabricated items on aircraft following established operating procedures. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. Mentor and train other Sheetmetal Technicians.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Use complicated schematics/blueprints, engineering drawings and technical instructions to safely perform sheetmetal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications. Mentor and train Sheetmetal Technicians, as required. Review their work prior to sign off to ensure work complies with quality control standards. Oversee projects or other technicians and assesses requirements of assigned tasks to procure required. materials and documentation for assigned tasks. Use blueprints to cut and form plastics and follow standard operating procedures when using adhesives, sealants and solvents. Utilizing tools as required. to shape and form complex angles and configurations according to blueprint specifications or written/verbal information. Safely operate shop equipment such as: brakes, presses, riveting equipment, shears, and hand tools associated with sheetmetal functions. Use the proper hardware for various sheetmetal applications. Comply with all safety, 5S, and housekeeping policies. Uses personal protective equipment as required. Ensures aircraft is protected (PTP). . Conduct monthly 5S audits, as required. Use the material tracking system to create parts demand, track squawks and to sign-off work. Assist in developing initiatives to meet individual OGSM requirements, as required.Additional Functions: Work closely with lead to develop and implement process improvements that increase safety, reduce cost, cycle time, and man hours. . Participate in continuous improvement activities (e.g. YIAW, Kaizen events, etc.) . Coordinate with other disciplines concerning projects. . Perform Lead responsibilities, as required. .Perform other duties as assigned.Other Requirements: Advanced knowledge of sheetmetal or fabrication processes (forming, drilling, stamping, shaping, bending, punching, cutting, riveting, filing and dimpling). Ability to read and interpret blueprints and engineering documentation. Valid drivers license required. to operate towing and other Gulfstream transportation equipment. Ability to read, write, speak, and understand proficiently the English language. Demonstrates excellent communication skills, both verbal and written. Adapts to sudden schedule changes. Able to use tools and equipment associated with sheetmetal work. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must have a good working knowledge of computers and experience working with MicroSoft Office suite. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 222169Category: OperationsPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 09/30/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Mechanical Team Lead A&Pin GAC Van NuysUnique Skills:This position is for 5th shift Van NuysThe compensation range for this role is:$44.13 to $48.78 per HourFinal compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and locationEducation and Experience RequirementsHigh School Diploma or GED required. Airframe and Powerplant (A&P) certificate required.. Valid Drivers License required. for the operation of towing and other Gulfstream transportation equipment. 5 years aviation maintenance experience with advanced knowledge of inspection and heavy maintenance of mid/large-size aircraft. Position Purpose:Plan and coordinate all mechanical system activities and provide daily information on aircraft testing status and schedule impacts. Coordinate manpower requirements in support of all maintenance tasks, systems testing, discrepancy resolution, aircraft protection and flight tests.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Plan, schedule and complete tasks in order to meet service/delivery schedules. . Assist management, as required, with supervision and instruction of aircraft technicians in proper procedures and techniques of trouble shooting airframe and engine systems, routine inspections and preventive maintenance. Assist with performance appraisal of subordinates. Assess strengths and weaknesses of subordinates. Apply strengths for maximum job efficiency and provide guidance and growth opportunities to reinforce developmental areas. Provide diverse learning opportunities. . Ensure all required. components are ordered for timely availability. Send items out for rework/repair as needed. Receive and inspect upon return. Perform engine runs on aircraft as required. Maintain a current knowledge of Aircraft Service Changes (ASCs), Customer Bulletins, inspection schedule requirements, vendor information and all other procedures, publications and general knowledge pertaining to aircraft maintenance and servicing. Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance tasks within the quoted or standard CMP time. Perform post and pre-flight inspection and trouble shoot mechanical malfunctions such as fluid leaks and minor structural damage. Follow standard operating procedures when operating ground support equipment, such as power supply, hydraulic rig, nitrogen filler cart, and oxygen service cart. Operate and supervise use of special support equipment used in removal and installation of major components. Assist in maintaining work schedules and updating of CMP cards. Review work, including forms and records, to ensure compliance with Gulfstream Repair Station procedures and FAA Airworthiness Standards. Review daily job charging to ensure accuracy of charges to aircraft.Additional Functions: Apply 6S and Lean Initiatives to maintain good housekeeping and safety in all areas to include hangars, break areas, and offices. . Help develop goals for subordinates and Support the company OGSM at the floor level. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and heavy maintenance (i.e Aircraft component removal and installation, flight control rigging, engine removal, installation, rigging, schedule and unscheduled inspections, and major or minor sheetmetal/structural repairs or alterations). Advanced working knowledge of pertinent technical reference materials (maintenance manuals, IPCs and structural repair manuals, service bulletins, Airworthiness Directives, etc.). Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221055Category: Service CenterPercentage of Travel: Up to 25%Shift: Weekend NightsEmployment Type: Full-timePosting End Date: 07/26/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Interior Install Tech Srin GAC Van NuysUnique Skills:Must be willing to work any shiftThe compensation range for this role is: $35.20 to $38.90 per HourFinal compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and location.Education and Experience RequirementsHigh School Diploma or GED required. 4 years of applicable installation, fabrication or related experience. Experience in aerospace industry preferred.. Position Purpose:The Interior Installation Technician Senior works under limited supervision to remove, install, and/or fabricate aircraft interiors, which may include items such as trim, carpet, sound proofing, light structure, cabinetry, panels and other accessories. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. Mentor and train other Interior Installation Technicians.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Safely perform aircraft interior removal, installation, and/or fabrication of aircraft interiors (which may include galleys, closets, lavatories, side ledges, bulkheads, doors and panels). . Coordinate with supervision and Inspection to ensure compliance with Repair Station procedures, internal and FAA paperwork, sign-offs and quality specifications. . Mentor and train other Interior Installation Technicians. Review their work prior to sign off to ensure work complies with quality control standards. Accept lead responsibilities as required. Oversee projects or other technicians and assess requirements of assigned tasks to procure required. materials and documentation for assigned tasks. Utilize the material tracking system to create parts demand, track squawks and to sign-off work. Follow standard operating procedures when using tools and equipment such as hand tools, band saws, shears, sanders and brakes. Properly care for and maintain shop equipment and tools. Prepare and install aircraft interior items in accordance with company operation procedures and quality standards. Remove and re-install nut plates, inserts and other fasteners used in aircraft interiors. Apply proper use of hardware and fittings on aircraft installations. Comply with safety, 5S, and housekeeping policies and use personal protective equipment as required. Address unsafe conditions before putting people or property at risk. Assist technicians with aircraft maintenance requirements. Adapt to sudden schedule changes and coordinate projects with other shops/departments as required.Additional Functions: Work with lead and higher skilled technicians to develop and implement process improvements that reduce cost, cycle time, and man-hours using Lean Six Sigma and other process improvement techniques. . Make and use simple patterns for own use employing standardized procedures. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Ability to read and interpret blueprints and engineering documentation. Ability to use hand/power tools and equipment associated with installation and removal of interiors. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must be computer literate. Excellent communication skills, both verbal and written. Advanced knowledge of aircraft installation and/or fabrication processes applicable to the specific position, such as removal and installation of galleys, closets, lavatories, side ledges, bulkheads, doors, panels; working with composite panels made from Nomex honeycomb, fiberglass, Lexan, acrylic materials, etc. Must be able to read, write, speak, and understand the English language. Must be fluent in English. Additional InformationRequisition Number: 222228Category: OperationsPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 09/30/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Aircraft Technician IIin GAC Van NuysUnique Skills:The compensation range for this role is:$36.31 - 38.90 per HourFinal compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and location.Education and Experience RequirementsHigh School Diploma or GED required. FAA Airframe and Powerplant certificate and 2 years of aviation maintenance experience or 4 years of aviation maintenance experience to include 2 years of experience working on mid/large size aircraft required.. Valid Driver’s License required. Position Purpose:Under minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems and structures.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Communicate as required. to receive and understand work assignments. Perform complex aircraft inspections, repairs, and modifications with minimal supervision. Coordinate with MTL, STM, and the Inspection Department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete CMP cards, work order sign-offs, and other paperwork in a timely and accurate manner. Assist as needed with shift turnovers. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures when operating ground support equipment (external power carts, hydraulic mules, hydraulic lift platforms, tow tugs, forklifts, compressed gas cylinders, etc.) . Coordinate, accomplish, and assist with aircraft movement in hangar and ramp areas. Provide training to less experienced technicians. . Protect customer property (PTP).Additional Functions: Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain Company-provided tools and equipment. Return items to designated storage area after use. . Comply with safety rules and procedures. Use protective equipment as required. and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk. . Use the material tracking system to create parts demand, track squawks, and sign-offs, and to charge labor to correct work orders. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 222325Category: Service CenterPercentage of Travel: Up to 25%Shift: SecondEmployment Type: Full-timePosting End Date: 11/30/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft