Cheshire, CT 06410 • (32.1 miles) • Full Time • $73,500 to $110,000 / yr • 10/24/2026

Job Title: Supplier Quality Engineer Exempt Status: Exempt Location: Cheshire, CT Company Description: Hanwha Aerospace USA has long been recognized as a leader in the development and supply of flight critical Aerospace/Defense components and assemblies. Operating out of four state-of-the-art facilities located in Connecticut, Hanwha Aerospace USA offers growth and career development opportunities to enrich your talents. Summary: We are seeking a SQE who will be responsible for the Organization’s Supplier Quality Program to drive improvement in the Supply Chain by assuring adequacy in the Suppliers’ Quality Program and Inspection Methods. Additionally, the SQE shall participate in key processes which include Material Review Board, Supplier Audits / Surveillance, issuance of Supplier Correc

Bloomfield, CT 06002 • (33.5 miles) • Full Time • $72,719 to $121,198 / yr • 10/24/2026

Kamatics is seeking a Quality Engineer responsible for supporting manufacturing and quality initiatives through process monitoring, root cause investigation, corrective actions, and continuous improvement activities. This role will define methods, equipment, and gauging necessary to measure key process parameters and customer requirements while utilizing statistical tools and data analysis techniques to improve quality, reduce variation, and minimize waste. The Quality Engineer will work cross-functionally with Manufacturing Engineering, Operations, and Quality teams to investigate non-conformances, implement corrective actions, and improve overall process effectiveness. This position requires strong analytical skills, attention to detail, and the ability to effectively communicate and col

Bloomfield, CT 06002 • (33.5 miles) • Full Time • $80,000 to $100,000 / yr • 10/24/2026

WGPW Industrial Turbine Services Product Engineer Job Description Job Title: Engineer Department: Engineering Reports To: Senior Director of Engineering FLSA Status: Salary Exempt Position Status: Indirect Work Hours: 7:00AM – 3:30PM SUMMARY The individual is responsible for the design and oversight of new manufacturing processes required for gas turbine engine component repair. They will support Engineering efforts in technology and hardware development for enhancing product quality and life cycle. ESSENTIAL DUTIES AND RESPONSIBILITIES The position includes, but is not limited to, the following essential duties and responsibilities. Other relevant duties will be assigned on an as-needed basis. Create detailed instructions for inspection, repair and assembly of gas turbine engines and powe

Southwick, MA 01077 • (35.6 miles) • Full Time • $90,000 to $120,000 / yr • 10/24/2026

Job Position Summary: CNC Programmer is responsible to create computer numerically controlled (CNC) programs to be used for automating machinists’ tools by using computer generated electronic data You must have: High school diploma or GED required. Associate degree or higher in related field preferred Experience with CNC Mill multi-axis programming. CAD/CAM experience NX preferred. Processing Engineer experience preferred. Proficient computer skills including Microsoft Office Understanding of CNC machining techniques, and materials. Ability to interpret blueprints and knowledge of GD&T Ability to choose and/or design correct tooling, and apply speeds and feeds based on process and materials. Working knowledge in the Aerospace Manufacturing industry to include Aerospace standards and specif

Shelton, CT 06484 • (36.8 miles) • Full Time • 10/24/2026

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily including the following: Design and configure custom and semi-custom power distribution products using Lex’s configurable design platforms to meet customer specifications and application requirements. Collaborate with Sales, Product Management, and customers to understand application needs and translate them into manufacturable, compliant solutions. Generate detailed drawings, wiring diagrams, and bills of materials (BOMs) to support manufacturing and procurement for customer orders. Provide technical support to customers and internal teams regarding product capabilities, system integration, and application considerations. Ensure designs align with UL, NEC, and other applicable standa

Windsor, CT 06095 • (36.9 miles) • Full Time • 10/24/2026

What are your contributions to the team? · Act as a systems engineer and carry out pneumatics discipline activities · Assure integration and interface management of assigned systems and coordinate with internal groups & suppliers. · Define pneumatic system architecture, prepare specifications and requirements, conduct functional modeling and trade studies. · Ensure engineering requirements management, validation and verification · Manage suppliers from an engineering project and engineering technical perspective · Review and approve engineering design documents such as vendor drawings, test procedures, acceptance test procedures, qualification reports and certification documents · Document technical engineering analysis, ground, and flight test results · Prepare engineering technical repor

Hartford, CT 06103 • (36.9 miles) • Full Time • $40,000 to $80,000 / yr • 10/24/2026

Job Title:Field Service Technician I Description: A wireless communications company with advanced technology to address the nation’s first-responder interoperability crisis seeksmotivatedfield techniciansto help design and deploy critical networks. Radio/IP Network System Field Technicians are responsible for the implementation, deployment, and testing of Mutualink’s Interoperable Multimedia System. The ideal candidate will have baseline networking knowledge, a track record of customer-facing work, and a strong desire to learn. The position requires heavy travel. Skills/Qualifications: IP Network (Highly Desired) Understanding of the OSI Model (Layers 1-3), IP addressing, subnetting, and VLANs. Experience with router and switch configuration is a huge plus. Certifications: CompTIA Network+

Hartford, CT 06103 • (36.9 miles) • Full Time • $83,000 to $110,000 / yr • 10/24/2026

Title: Service Engineer Reports to : Service Expert Coordinator Location : DMG MORI TC Hours : Monday through Friday, 8:00am to 5:00pm Classification : Non Exempt Travel : 80% Annual Base Salary Range: $83k+ (variance in base salary offer will depend on experience level/skill set) Employment is conditioned on DMG MORI's ability to obtain and maintain any necessary export licensing. Service Engineers are expected to provide customers with maintenance and repair assistance of DMG MORI CNC machine tools on location or by telephone. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skills, and abilities required. Reasonable accommodations may

Middletown, CT 06457 • (41.7 miles) • Full Time • $80,000 to $120,000 / yr • 10/24/2026

Job Title : Automation Controls Application Engineer Classification: Regular, Full Time FLSA Status: Exempt Open to candidates in CT, RI, or MA. Primary Functions: Pre- and post-sales support for all Power-Flo Technologies Automation products and services. Assist Customers with our core industrial products Assist sales and account managers as necessary to close business. Generate Engineering and Training billings. Essential Responsibilities : Phone and occasional On-Site customer support. Preparation and execution of product training classes including development of course and materials. Attend vendor training classes as offered and/or required. Maintenance, Appearance and Upgrades to Product Demo Rooms and Training Rooms across the entire Axis territory Weekly Schedule report. Target and

Brookfield, CT 06804 • (23.4 miles) • Full Time • 10/24/2026

With over 60 years of innovation and design experience in producing small-wheel vehicles, Club Car is a leading manufacturer of gas and electric golf, utility, and personal transportation vehicles. Founded in 1958, the Club Car product portfolio has grown to include much more than golf cars, now encompassing vehicles for commercial and consumer markets, built with an uncompromised desire for superior performance. As an industry leader in electrification and sustainability, Club Car is proud to be at the forefront of environmentally responsible Zero Emission Vehicle (ZEV) technologies. GENERAL JOB DESCRIPTION As a Club Car Field Service Technician, each day will bring new opportunities, but you will always be involved in maintaining, troubleshooting, and repairing golf cars and utility vehi

Bristol, CT 06010 • (24.5 miles) • Full Time • 10/24/2026

Field Service Technician As a Field Service Technician, you will play a critical role in delivering top-tier service to our customers by providing installation, service, maintenance, repair, and upgrades to our automated machinery systems and critical production equipment. The Field Service Technician must have prior experience with capital equipment, custom automated machinery, or industrial machine building within one or more of these industries: medical devices, pharmaceutical, food processing, consumer products, automotive, packaging, or other industrial sectors. This role requires a strong understanding of mechanical, electrical, pneumatic, and automation systems to ensure optimal performance and minimal downtime for our customers. Work is to be performed at the lowest cost consistent

Farmington, CT 06032 • (29.1 miles) • Full Time • $90,000 to $150,000 / yr • 10/24/2026

HRP Associates, Inc. is seeking highly skilled and motivated Remedial Environmental Engineers with 10+ years of experience to join one of our offices in either Farmington, CT, Clifton Park, NY, Buffalo, NY, Plymouth, MA, or Greenville, SC. Successful candidates will be responsible for designing and implementing remedial solutions for soil, groundwater, and soil vapor contamination projects. This role requires a strong technical background, excellent problem-solving skills, and the ability to work collaboratively with multidisciplinary teams. If this sounds like the career move you have been waiting to make and if you meet our qualifications, we want to talk with you! Responsibilities: Develop and design remedial strategies for soil, groundwater, and soil vapor contamination Conduct site as

New Britain, CT 06051 • (33.2 miles) • Full Time • 10/24/2026

Enjet Aero machines and fabricates complex jet engine parts, components and assemblies for leading OEMs in the commercial, defense and general aviation sectors. Our goal is to be regarded as an irreplaceable resource by our customers. The only way for a company to meet such a goal is to consistently meet production deadlines and expectations. Your work has a destination! Enjoy competitive pay, excellent benefits, a company profit sharing bonus plan, and more while building precision aerospace components that help aircraft fly safely around the world. Join a growing, industry-leading aerospace manufacturer where your work makes an impact and your career can take off. Position Description: This position is responsible for all CMM programming, setup and inspection of manufactured product to v

Berlin, CT 06037 • (34.1 miles) • Full Time • $30.00 to $45.00 / hr • 10/24/2026

**CNC Lathe Programmer ** *Salary commensurate with experience. * Company Overview: Cambridge Specialty Company is an approved supplier of jet engine service tools and precision aircraft parts. Since our founding in 1952, we have manufactured quality products for on-time delivery. Our state-of-the-art, 27,500 square foot facility houses all the equipment necessary to provide our customers with efficient, cost-effective production. Coupled with our experienced and highly skilled workers, this combination produces the finest jet engine service tools and critical flight safety parts and assemblies in the industry today. We are seeking a skilled and motivated CNC Programmer to join our aerospace manufacturing team. This is a full-time position working under the direct supervision of the Direct

Wethersfield, CT 06109 • (37.5 miles) • Full Time • 10/24/2026

Hazen and Sawyer is seeking a Senior Wastewater Engineer for our Wethersfield, CT office. As part of our Wastewater team qualified candidates will be involved with a wide range of wastewater infrastructure projects, focusing on treatment process design and construction. This will encompass all phases of design, including conceptual/feasibility evaluations, project management, preparation of design reports, permitting, development of construction drawings and specifications, and support of construction services. Hazen and Sawyer is a stable, growing, employee-owned company where engineers and scientists are valued. We are committed to making the world a better place by providing technically superior solutions to our clients for all things water. Why Hazen and Sawyer: Founded in 1951 by the

Middletown, CT • (41.7 miles) • Full Time • $70,000 to $90,000 / yr • 10/24/2026

Woodard & Curran is an employee-owned engineering, science, and operations firm dedicated to clean water, a safe environment, healthy communities, and happy people. We foster an inclusive, collaborative culture that supports professional growth, flexibility, and meaningful work, empowering our employees to make a lasting impact on our clients, communities, and the planet. What’s in it for you: This position offers the chance to drive and grow remediation engineering services for a well-established, privately held, national environmental engineering and science firm. You’ll collaborate with some of the industry’s leading technical experts to provide innovative solutions on various complex projects. The role also includes increased leadership opportunities through higher visibility in the ma

Oxford, CT 06478 • (28.9 miles) • Full Time • 10/23/2026

RBC Bearings is seeking a Chemical Engineer who will be report to the New Product and Process Development Group Manager. This position is responsible for the development, testing, and validation of new products and their associated manufacturing processes. The Chemical Engineer will primarily work on products and components related to RBC self-lubricating liner products which involve resin, structural and lubricant fillers, composites, improvements in adhesion. Additional development projects include development and troubleshooting of lubricants (greases and oils), bearing seals, cleaning and plating baths, as well as other chemical processes. Job Title/Location: Chemical Engineer – Oxford, CT Key Responsibilities: Development of new-engineered products for RBC Bearings. Provide chemical p

Meriden, CT 06451 • (34.2 miles) • Full Time • $77,000 to $87,000 / yr • 10/23/2026

Description: Launch Your Structural Engineering Career with BETA Group, Inc.! Are you graduating – or just recently graduated – and ready to lay the foundation for an exciting career in engineering design? BETA Group, Inc. is seeking a motivated Structural Engineering Designer to join our growing team at our newest Connecticut office in Meriden. Start your career working on exciting building and structural design projects alongside experienced engineers, GIS professionals, architects, and environmental scientists. Gain hands on experience, learn from talented multidisciplinary teams, and build a strong foundation for long term professional growth. At BETA, we’re committed to supporting your career development and shared success as an employee-owned company (ESOP). If you’re passionate abou

Hartford, CT • (36.3 miles) • Full Time • $85,000 to $100,000 / yr • 10/23/2026

Description Creativity. Innovation. A desire to effect positive change. That’s what it takes to work at Fuss & O’Neill – because that’s what we do for the communities in which we work: we create, innovate, and design long-lasting improvements that improve quality of life. Quality of life is also important on the job, so we’ve prioritized work-life balance by offering flexible/remote work opportunities, part-time benefits, and generous PTO. We believe that each day is an opportunity to support one another, to support our clients, and to support our communities. If you feel the same, then you’ve found your future. Fuss & O’Neill, a leading New England-based consulting firm, is seeking a Mechanical Engineer to join our growing MEP team. This is an exciting opportunity for a mechanical enginee

Hartford, CT • (36.3 miles) • Full Time • 10/23/2026

Company Description Veolia Group is a global leader in environmental services, operating across all five continents with nearly 218,000 employees. Specializing in water, energy, and waste management, Veolia Group designs and implements innovative solutions for decarbonization, depollution, and resource regeneration, supporting communities and industries in their ecological transformation. Within this framework, Veolia's Water Tech Business brings together a dedicated team of experienced professionals committed to tackling the world’s most complex challenges related to water scarcity, quality, productivity, and energy. Together, we pursue a shared mission to create a more sustainable future. Job Description Veolia Water Tech is seeking a highly motivated, customer-focused Field Service Tech

Hartford, CT 06103 • (36.9 miles) • Full Time • $45,000 to $52,000 / yr • 10/23/2026

At NCR Atleos, our Field Services organization is on the front line of keeping commerce running for some of the world’s largest retailers and financial institutions. Our technicians are trusted partners to our customers, delivering reliable, high-quality service that keeps essential self-service technology operating around the clock. We are looking for Field Service Technicians who are technically curious, mechanically inclined, and customer focused. Whether you already have field service experience or bring transferable technical skills, NCR Atleos provides the training, tools, and support needed to build a long-term career in a high-impact, customer-facing role. Position Summary: Are you a Field Technician, Field Engineer, or Service Technicianor interested in starting a career in this f

Wallingford, CT 06492 • (38.3 miles) • Full Time • 10/23/2026

WHAT THE ROLE DELIVERS Lead continuous improvement efforts in process automation and controls to optimizeproductivity. Must be receptive to change and integrate new processes, technology, and workmethods into plant operations. Benchmark industry trends to identify and develop bestpractices to apply within Wallingford operations WHAT YOU WILL DO Provides engineering support to Maintenance and Production to safely and cost effectivelycoordinate ongoing maintenance of current process automation systems, control systems, andinstrumentation. Drive continuous improvement efforts that maximize automation and control through the use of Programmable Logic Controllers (PLC) and the site Distributed Control System (DCS). Responsible for maintaining and improving process instrumentation Installing upg

Morris, CT 06763 • (12.1 miles) • Full Time • $30.00 to $48.00 / hr • 10/23/2026

About the Opportunity i2Systems, an innovative LED lighting manufacturer specializing in advanced lighting solutions, is seeking talented and motivated engineering professionals to join our growing team. We are looking for individuals who are passionate about engineering, problem-solving, innovation, and continuous improvement. Whether you're a recent engineering graduate or an experienced professional, we welcome candidates interested in applying their technical knowledge in a hands-on, collaborative manufacturing environment. Key Responsibilities Engineering & Technical Support: Support the development, evaluation, and optimization of manufacturing processes, equipment, and production systems. Process Design & Improvement: Identify opportunities to improve manufacturing efficiency, produ

Oakville, CT 06779 • (21.4 miles) • Full Time • 10/23/2026

Technical Sales Engineer Northeast US Our client, a national construction products manufacturer, is seeking a technical sales professional (PipeProducts) to join their growing team. Primary Responsibilities: Employ technical skills to conduct presentations, develop project specifications and grow project pipeline. Develop and maintain professional relationships with accounts including consulting engineering firms, regulatory agencies, contractors, developers and landscape architects. Manage pipeline using CRM to measure project specific performance. Update continuously to ensure information is timely, accurate and complete. Provide technical and marketing assistance to other team members as needed. Continuously improve technical expertise and knowledge of product line, Competitive products

Farmington, CT 06032 • (29.1 miles) • Full Time • 10/23/2026

Job Title Estimating Engineer Job Number 13-1051.00 Department Sales Reports to Director of Technical Sales Engineering Primary Position Objectives To perform cost estimating on request for quotation as stated in internal procedures in order to assure the accurate cost for production of product is maintained. Position Responsibilities Key Responsibilities Description of Duties Review drawing or CAD file to determine if CSS has the capability to produce Establishes complete manufacturing Routing, Lot Sizes, Estimate and Lead-time Requests pricing from CSS Purchasing & OV Requests pricing from Asian affiliates Processes complete CSS Marked up drawing for CSS and Asian affiliate quotes Estimates cost and lead-time for tooling, jigs, and fixtures required to produce the job – send to CSS Eng f

Danbury, CT 06810 • (29.9 miles) • Full Time • $25.00 to $32.00 / hr • 10/23/2026

Some see the railway as transportation, while at Plasser American we see it as transformation. The story of how steel tracks turned the American promise into American progress and forged a trusted pathway to the possibilities of the future. It’s a story that continues today, an American legacy unfolding mile by mile. There is a lot riding on those tracks and we know that support, quality and know-how are all important aspects in staying on track. Progress is about more than getting from Point A to Point B. It’s knowing you have a trusted foundation to move you forward toward new possibilities waiting around the corner. Join Plasser American to become part of our team forging ahead towards new opportunities in railway maintenance. The railway is a path to the future, choose this path and ap

Danbury, CT 06810 • (29.9 miles) • Full Time • $30.00 to $35.00 / hr • 10/23/2026

Build excellenceone setup, one part, one standard at a time Our team is united by a simple mission: make parts that meet spec the first time, every time, while keeping people and equipment safe. If you thrive on precision and teamwork, this is where you can make an impact. How you'll contribute From first-piece to final inspection, you’ll drive quality and continuity across CNC mills and lathes: Own the setup, troubleshooting, and operation of CNC Milling and Turning Machines to achieve consistent, high-quality output. Confirm conformance using bench gauging and appropriate inspection techniques before releasing parts. Apply Standard Work rigorouslysetup/operation, process verification, inspection, documentation, and material handling. Perform light preventative maintenance to sustain mach

Berlin, CT 06037 • (34.1 miles) • Full Time • $80,000 to $100,000 / yr • 10/23/2026

Step Into the Role You start your morning reviewing a new implant design. By 9 a.m., you’re translating that model into efficient NC code for a multi-axis mill. After lunch, you’re on the floor proving out a first-article on a Swiss-style lathe, collaborating with Quality Engineering to finalize a Process Control Plan and a Manufacturing Inspection Plan. Before the day ends, you’ve tuned feeds and speeds on a grinding cell, standardized a legacy program to current best practices, and queued up tooling trials that could shave minutes off cycle time across multiple sites. This is a day in the life of our CNC Applications Engineer. What You’ll Do Program and optimize CNC equipment across milling, turning, and grinding operationsincluding multi-spindle, multi-axis, and Swiss-style platformssup

Wallingford, CT • (38.4 miles) • Full Time • $75,000 to $120,000 / yr • 10/23/2026

Description: The Product Validation Engineer is responsible for planning and conducting a variety of design qualification and product evaluation tests on RF coaxial cables and connectors for use in military and commercial applications. Product evaluations can include mechanical, electrical, or environmental testing in accordance with customer, military or TMS specifications. Essential Duties and Responsibilities: Develop and execute detailed test plans for product validation and qualification test campaigns, and report project status, internally or externally, as requested. Interpret engineering specifications and communicate technical risks, clarification or change recommendations directly with the customer. Compile and organize test data into comprehensive and thorough test reports, in a

Windsor Locks, CT 06096 • (38.5 miles) • Full Time • $36.00 to $45.00 / hr • 10/23/2026

This Mechanical Manufacturing Engineer role focuses on developing manufacturing processes and tooling for complex mechanical assemblies used in space and marine applications. Responsibilities include improving assembly methods, troubleshooting manufacturing issues, ensuring quality and safety compliance, and driving process improvements. Key Requirements: Bachelor’s degree in a STEM field and 3+ years of relevant experience. Knowledge of mechanical manufacturing, tooling, assembly, and fabrication. CAD/Creo experience preferred. Understanding of Lean Manufacturing and continuous improvement. Strong problem-solving, communication, and teamwork skills. \nCompany Description Zobility is RGBSI's workforce management and staffing division. RGBSI is a multi-national corporation headquartered in

Windsor Locks, CT • (38.5 miles) • Full Time • 10/23/2026

Engineer the Future of Space Exploration – Manufacturing Engineer (2nd Shift) PDS Tech Commercial is partnering with a leading aviation and aerospace industry innovator to find a talented Manufacturing Engineer who is ready to make a lasting impact. This is your opportunity to support the production and assembly of critical mechanical hardware used in life support and thermal control systems for Orion and Artemis missions . If you're passionate about hands-on engineering, continuous improvement, and contributing to groundbreaking aerospace programs, we want to hear from you. Position Details Job Title: Manufacturing Engineer Job Type: Full-Time Contract (6 Months) Location: Windsor Locks, CT Schedule: 2nd Shift, 5x40 Pay Rate: $45.15 per hour US Citizenship required due to Government regul

Bristol, CT 06010 • (24.5 miles) • Full Time • 10/22/2026

Summary: We are seeking an Architectural Drafter to join our Technical Team in a fast-paced manufacturing company. This role requires a detail-oriented and organized individual who can develop standard product details and produce shop/installation drawings of Morin wall and roof metal panels in commercial, industrial, and architectural applications. This position requires close coordination with other departments to ensure our customers receive the highest level of customer service and support that drives and maintains the reputation of our company. Essential Functions: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. 1. Develop Morin shop drawings as defined in the scope of work provided by customer submitted drawings and sp

Orange, CT • (40.6 miles) • Full Time • 10/22/2026

We are currently seeking qualified candidates for consideration to fill an open Lead Engineer - Transmission Lines position in our Client's office in Orange, CT. This position will have a hybrid schedule. The Program Management Services Division at LaBella provides comprehensive management services for complex projects and multi-year capital programs. Project teams are established to provide a customized mix of business consulting, project management, financial control and monitoring, administrative, and technical support services. Salary Range:$100,000 - $140,000 The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Responsibilities Conductor Selection Structure recommendations

Broad Brook, CT 06016 • (43.8 miles) • Full Time • $65,000 to $100,000 / yr • 10/22/2026

We are looking for a Electrical-Mechanical Engineer. You will design and develop an industry leading products. We’re looking for someone with electrical, mechanical, pneumatic, automation, AI experience for this engineering role. This is a full-time direct hire position. What you will need as an Electro-Mechanical Engineer: Design Electrical and Mechanical systems Develop PLC and HMI programs for control panels Mitsubishi PLC a plus Develop prototypes Troubleshoot any issues with electrical and mechanical designs and machines Electrical and mechanical systems compliance AI integration and product automation You need SCCR and UL 508/A experience Other tasks as assigned. What you will get as an Electro-Mechanical Engineer: Competitive Pay health, dental, vision 401 K Generous vacation time a

Meriden, CT 06450 • (36.7 miles) • Full Time • $80,000 to $95,000 / yr • 10/22/2026

Job Overview We are seeking a highly skilled CMM Programmer/Quality Engineer to join our manufacturing team. The ideal candidate will be responsible for programming and performing precise dimensional inspections using Coordinate Measuring Machines (CMM) and other precision measuring instruments to ensure products meet strict quality standards. This role requires a strong understanding of quality control processes, GD&T, blueprint reading, and manufacturing specifications, with an emphasis on maintaining compliance with industry standards such as AS9100, ISO 9001, and ISO 13485. Responsibilities Program and operate Coordinate Measuring Machines (CMM) including ZONE3 (or similar) software to perform detailed dimensional inspections of manufactured parts. Conduct quality inspections using pre

Winsted, CT 06098 • (16.8 miles) • Full Time • 10/21/2026

Location | Winsted, CT Salary |Competitive Pay + Bonus + Day 1 Benefits & 401K Company Match Shift(s) Available:Monday-Friday | 7:30 AM - 4:30 PM Aerospace Manufacturing | Mastercam | Siemens NX | CNC Programming DRT Aerospace is seeking a Sr. Machinist Programmer to support the production of mission-critical aerospace components. This highly visible role combines CNC programming, manufacturing engineering, process development, and shop-floor support to drive operational excellence, quality, and on-time delivery. If you're an experienced CNC Programmer, Manufacturing Engineer, or Process Engineer who enjoys solving complex machining challenges and partnering directly with production teams, this opportunity offers a hands-on environment where your expertise will make an immediate impact. Wh

Waterbury, CT 06702 • (24.5 miles) • Full Time • 10/21/2026

Join a USA Today Top Workplace! Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufacturers of precision machined parts in the United States. Our mission is to help manufacturers maintain a competitive advantage in the world economy by improving productivity. The Robert E. Morris Company is a division of Morris Group, Inc. We supply CNC machine tools, tooling, accessories, software, automation, and more to manufacturers of precision machined parts. Our customer base is located in the New England states plus northern New Jersey and eastern New York, including the New York metropolitan area and Long Island. Our mission is to help manufacturers from all industry sectors achieve

Danbury, CT 06810 • (29.9 miles) • Full Time • 10/21/2026

JOB SUMMARY: Takes direction from Manufacturing Engineering to support production to facilitate the manufacturing of simple to highly complex PCB assemblies. Provides technical guidance to others within and outside the manufacturing department on an as required basis. DUTIES AND RESPONSIBILITIES: Support production (PCBA, Cable & Box Build) as needed with programming and/or operation of production equipment, solving technical issues as they arise. Assist in the maintenance and documentation of production equipment which includes: SMT Stencil printer, SPI, SMT placement machines, SMT reflow oven, AOI, X-Ray, Selective Solder, Wave Solder, PCB Depanelization Router, AMP K-Press, Labeling Systems, Conformal Coating, PCB wash systems, MicroVu. Review and address all Technical Action Requests.

Bloomfield, CT 06002 • (33.5 miles) • Full Time • 10/21/2026

Aquinas Consulting is currently looking to fill an Electrical Engineering Technician job in Bloomfield, CT. This CONTRACT hire job is available with one of our key customers in the manufacturing industry. In this role, you will be responsible for supporting legacy and new elevator control system electronics through PCB prototyping, test rig development, and failure analysis. In order to be successful in this position, you must have hands-on PCB fabrication and test experience along with an AS in Electrical Engineering or BS in Electrical Engineering Technology. Preference will be given to someone with component obsolescence and root cause failure analysis experience. Electrical Engineering Technician Job responsibilities: Procure components, organize BOMs, and assemble and solder prototype

Hartford, CT • (36.3 miles) • Full Time • 10/21/2026

Company Description Why CBRE? When you join CBRE, you become part of the global leader in commercial real estate services and investment that helps businesses and people thrive. We are dynamic problem solvers and forward-thinking professionals who create significant impact. Our collaborative culture is built on our shared values, respect, integrity, service and excellence and we value the diverse perspectives, backgrounds and skillsets of our people. At CBRE, you have the opportunity to realize your full potential. Job Description About the Role: As a CBRE Building Engineer, you will be responsible for monitoring, maintaining and repairing building system operations and the performance of various areas including plumbing, electrical, painting, roofing, heating, and cooling. This job is par

Westfield, MA • (39.7 miles) • Full Time • 10/21/2026

Brief Description DDS Acoustical Specialties is seeking a Sales Engineer to expand the sales efforts of the company as it looks to grow to the next level. The ideal candidate will have extensive experience in a high-level setting, selling and managing projects from inception to substantial completion. The candidate should also have considerable experience in customer service, spending most of their time participating in customer-facing activities. Experience in the business of noise control and acoustics is preferred but not required. We encourage applicants with related experience, transferable skills, and a willingness to learn to apply. Primary Responsibilities • Identify and estimate projects utilizing known products or proposing new materials. • Engage in field visits to project sites