Fort Lauderdale, FL • (15.3 miles) • Full Time • $25.00 to $40.00 / hr • 10/2/2026

Under general supervision and reporting Quality Management in Quality Operations, The Quality Inspector is responsible for performing visual inspection operations including In-process, Final Inspection, and FAI’s as appropriate. The Quality Inspector must be familiar with hand tools and inspection under magnification. The Quality Inspector will also assist in verification of test data and all other applicable data concerning components, and associated documentation and other duties identified by cognizant management. Job Responsibilities: Experienced quality individual in dimensional inspection of aerospace machined components Experience in performing FAI’s – AS9102 Experience with hand measurement tools Knowledge of CMM Inspection process Knowledge and experience in GD&T (ASME Y14.5) Know

Miami, FL 33165 • (43.3 miles) • Contractor • 10/2/2026

Haz ms que simplemente llegar a fin de mes. Reparte con Gopuff y gana dinero entregando lo que tus vecinos necesitan desde un centro de Gopuff cercano! Con un punto de recogida centralizado y zonas de reparto ms reducidas, Gopuff hace que ganar dinero sea muy sencillo. Es fcil: reparte desde un centro cercano directamente al cliente! Entregars productos bsicos del da a da, desde artculos de limpieza, productos para el hogar y medicamentos de venta libre hasta alimentos, bebidas y mucho ms. Regstrate hoy mismo como repartidor en bicicleta de Gopuff y descubre la forma ms fcil de ganar mucho dinero! Por qu colaborar con Gopuff? Gana una cantidad fija por cada pedido que entregues, incluso si el cliente lo cancela Qudate con el 100 % de las propinas y gana un extra con incentivos especiales R

Miami, FL 33178 • (37.5 miles) • Full Time • $25.00 to $30.00 / hr • 10/1/2026

POSITION SUMMARY The Quality and Accreditation Coordinator supports the organization's quality improvement, regulatory compliance, and NCQA accreditation activities. This role is responsible for assisting the Director of Quality Operations in coordinating quality programs, monitoring performance measures, supporting NCQA health plan accreditation surveys, maintaining required documentation, and collaborating with internal departments to ensure compliance with federal, state, and NCQA health plan accreditation standards. The coordinator assists in driving continuous quality improvement initiatives that improve member outcomes, operational performance, and health plan effectiveness. Position is onsite Monday-Friday. ESSENTIAL DUTIES AND RESPONSIBILITIES Review and analyze data across various

Pompano Beach, FL 33064 • (8.6 miles) • Full Time • 10/1/2026

Description: CERTEX USA is seeking a detail-oriented and skilled Wire Rope Assembler to join our team in Pompano Beach. FL, responsible for fabricating, inspecting, and assembling various rope products to meet high-quality standards and customer specifications. Position Overview Assembler/Fabricators accurately identify different diameters, constructions, and best possible applications for an array of products that are utilized in industries like construction, energy, mining, crane operation, space and aeronautical, deep-sea recovery and rescue. Items assembled may be constructed with wire, chain or synthetic material. Key Responsibilities/Essential Duties Review, interpret drawings and blueprints and capacity tables Understand codes and specifications as outlined on order tickets Calculat

Fort Lauderdale, FL • (15.3 miles) • Full Time • 10/1/2026

About Burns: Burns Engineering provides professional engineering design and project management services for transportation, facilities, and infrastructure projects. We help our clients attain their strategic goals and initiatives through successful large-scale infrastructure projects. Burns' full-service capabilities include mechanical, electrical, civil, structural, transportation, and energy consulting engineering. Recently voted a Top Workplace by Philly.com, we credit our strength as an organization to our talented, driven, vibrant team. Burns is an ENR Top 500 Firm, and has been named an MEP Giant by Consulting-Specifying Engineer Magazine, as well as a Hot Firm by Zweig. We are industry experts, proven leaders, innovative thinkers, and team players. We put our clients' successes and

Plantation, FL • (15.7 miles) • Full Time • 10/1/2026

NOW HIRING – COMMERCIAL REFRIGERATION REPAIR TECHNICIAN ?? Gold Coast Gasket & Hardware is growing, and we’re looking for an experienced Commercial Refrigeration Repair Technician to join our team! We are looking for someone who is dependable, motivated, and has experience servicing and repairing commercial refrigeration equipment. Responsibilities include: • Diagnose and repair commercial refrigeration equipment • Perform preventative maintenance and service calls • Work with customers and provide professional service • Complete work orders and service documentation • Maintain a clean and safe work environment Qualifications: • Commercial refrigeration repair experience preferred • Strong troubleshooting and mechanical skills • Valid driver’s license • Reliable transportation • Ability to

Fort Lauderdale, FL 33315 • (18.8 miles) • Full Time • 10/1/2026

Description: Spot Zero is the industry-leading manufacturer of onboard dock and seawater reverse osmosis systems. From personal pleasure crafts to the world’s finest mega yachts, we develop reverse osmosis systems to meet and exceed customer expectations. At Spot Zero, we believe in internal growth and development. Our Production Technician path is designed to help team members advance their skills and responsibilities while contributing to the company’s success. Production Technician I Primary Focus: Inventory Handling and Receivables Pick parts and components from inventory for builds Receive and verify incoming shipments Stock inventory accurately Maintain clean and organized inventory areas Learn basic product knowledge and assembly preparation This role serves as the foundation for ad

West Palm Beach, FL 33407 • (29.4 miles) • Full Time • $45,000 to $80,000 / yr • 10/1/2026

The SolidWorks Designer will play a critical role in developing precise 3D models and CAD drafts for aerospace parts and industrial equipment within a small, focused design team. This position demands expertise in prototype development and design optimization while working closely with manufacturing teams to ensure design feasibility and efficiency. Career growth opportunities include advancing into technical leadership roles or specializing further in design. Responsibilities Create detailed 3D models and CAD drafts of aerospace and industrial equipment components Conduct thorough design reviews to ensure accuracy and compliance with specifications Develop prototypes and assist in testing design concepts Prepare comprehensive technical documentation for manufacturing and quality control O

West Palm Beach, FL 33412 • (31.5 miles) • Full Time • 10/1/2026

Job description: We are currently seeking a skilled Metal Flashing Installer to join our team in Hobe Sound. If you have hands-on experience working with metal flashing and take pride in quality workmanship, we want to hear from you. Requirements: Proven experience with metal flashing installation (required) Ability to read and interpret basic construction drawings Knowledge of roofing and/or construction practices Strong attention to detail and safety Reliable transportation and punctuality Responsibilities: Install metal flashing on residential and/or commercial projects Measure, cut, and shape metal materials as needed Ensure proper sealing and weatherproofing Follow safety protocols and job site guidelines Work efficiently as part of a team What We Offer: Competitive pay based on exper

Hialeah, FL • (33.6 miles) • Full Time • 10/1/2026

Our custom millwork company is looking for an experienced Carpenter/Installer to join our established team. We specialize in commercial furniture. We are looking for a full time Carpenter/Installer with experience who loves thinking outside the box and wowing clients. If you have yourown truck and tools it's a plus. You might need to travel within a 60-mile radius, although most work is on-site. For the right applicant, we will consider a promotion to Lead Carpenter/Installer based on performance. This is a stable full- time position Monday- Friday. If you are interested in a rewarding position within an organization that promotes quality craftsmanship, strong work ethic and respect among its employees, please respond with your resume and portfolio.

Delray Beach, FL • (11.2 miles) • Full Time • $25.00 to $30.00 / hr • 10/1/2026

About the Position We are is seeking an experienced, motivated, bilingual Aesthetician / Laser Technician & Patient Coordinator to join our growing medical aesthetics team. This is a unique hybrid position for someone who enjoys both providing exceptional aesthetic treatments and converting patient opportunities into booked appointments and sales . The ideal candidate is equally comfortable performing treatments, educating patients, recommending skincare and treatment plans, calling leads, following up with consultations, and working the front desk. This is not a position for someone who prefers to stay exclusively in the treatment room . We are looking for someone who is proactive, sales-minded, technologically capable, personable, and comfortable taking ownership of the entire patient ex

Fort Lauderdale, FL 33321-6419 • (15.3 miles) • Full Time • 10/1/2026

The Quality Assurance Manager lead and manage our QA and compliance programs. This role is responsible for ensuring the highest standards of airworthiness, safety, and regulatory compliance while driving continuous improvement across all operations. Key Responsibilities: Lead quality assurance programs and ensure compliance with FAA, EASA and other regulations. Manage internal and external audits, ensuring zero major findings and successful certification outcomes. Develop, maintain, and manage compliance manuals, including Repair Station Manual (RSM), Quality Control Manual (QCM), and EASA supplements. Implement and oversee Corrective & Preventive Action (CAPA) programs and Root Cause Analysis (5 Whys, 8D) to reduce non-conformance and improve inspection turnaround times. Ensure all inspec

Hollywood, FL 33020 • (23.4 miles) • Full Time • $15.00 / hr • 10/1/2026

Classification: 454 Non-Exempt Job Summary: The Mat Roller processes clean mats for load building and delivery to customers. May process other products such as mops, shop towels, Facility Services items or fender covers. Performs other tasks as required. Essential Functions: - Transfer carts of clean mats to mat rolling area. - Unload carts, inspect for quality and roll mats. - Sort mats and load into other carts, load building area, route loads, storage or trucks. - Process other products such as mops, shop towels, fender covers or Facility Services items for load building and storage. - Move loaded or empty carts/bins within the production area. - Operate forklift when necessary. - Continuously meet efficiency and safety standards for the position. - Comprehend and follow instructions as

West Palm Beach, FL • (28 miles) • Full Time • $159,200 to $214,100 / yr • 10/1/2026

Stanley Consultants is an award-winning and industry-leading global consulting engineering firm, with an unmatched commitment to culture, values, and ethics. We are dedicated to client experience and solve the most complex challenges to create a sustainable, connected, and enriched world for all. As the world changes, Stanley strategically evolves with it, integrating the latest technology, innovation, and resiliency practices. With over a century of experience serving the energy, federal government, transportation, and water sectors, we have helped improve lives and shape the infrastructure systems that connect us. As an employee-owned organization with a People First approach, we stand apart from other engineering consulting and services firms. At Stanley, your voice counts, your growth

Palm Beach Gardens, FL 33418 • (35.5 miles) • Full Time • 10/1/2026

We are seeking a Director of AI & Automation to lead the design, development, and deployment of a company-wide automation and AI strategy. This role will be responsible for transforming how our business operates by implementing intelligent systems, workflow automation, and AI-driven processes across all departments. This is a hands-on leadership role for a builder who can both architect and execute. The ideal candidate will drive the implementation of AI agents, workflow automation, and system integrations to improve efficiency, reduce manual labor, and scale operations. This is not a purely managerial role. The ideal candidate must be capable of designing systems, understanding technical architecture, and working closely with developers to implement solutions. Responsibilities: AI & Autom

Deerfield Beach, FL 33442 • (5.8 miles) • Full Time • $14.00 to $20.00 / hr • 9/30/2026

Benefits: Free uniforms Paid time off Competitive salary Immediate start for Deerfield Beach Florida Location. Grow your career in the decorating industry by joining this growing multi location business. Been in business for over 10 years. Work with a local company with national clientele. Must have experience with heat pressing large DTF orders with detailed percision. Bonus if you have exeperience in one of the following: Graphic Design Embroidery In this role, you will be responsible to operate our production heat press, and service customers in-store. Responsibilities include: Heat Pressing Transfers Greeting Customers Reviewing work orders Counting your garments in and out Knowledge of: Art Files Digitizing Embroidery Stitching Styles Different Thread Brands Different backings Thread

Fort Lauderdale, FL 33309 • (11.7 miles) • Full Time • 9/30/2026

Company Description Do you want beneficial technologies being shaped by your ideas? Whether in the areas of mobility solutions, consumer goods, industrial technology or energy and building technology - with us, you will have the chance to improve quality of life all across the globe. Welcome to Bosch. Job Description We're looking for a detail-oriented and innovative Mechanical Design Engineering Intern to join our engineering team in Fort Lauderdale, United States. In this role, you will support the design and sustainability of mechanical components and systems while gaining hands-on experience in a professional engineering environment. You will work alongside experienced engineers to contribute to projects from concept through prototyping, developing your technical skills and understandi

Fort Lauderdale, FL 33312 • (18.3 miles) • Full Time • 9/30/2026

The Cleaning Authority de Fort Lauderdale est buscando limpiadores profesionales con experiencia que estn listos para dar el siguiente paso en su carrera: convertirse en entrenadores para nuestro equipo en crecimiento! Somos una empresa confiable y bien establecida, y con la creciente demanda, necesitamos lderes que puedan capacitar, motivar y guiar a los nuevos empleados para ofrecer las limpiezas de alta calidad que nuestros clientes esperan. Lo que hars: Capacitar a nuevos empleados en el campo (en el sitio y con entrenamiento prctico) Demostrar y reforzar nuestro sistema de limpieza por rotacin detallada (Detail-Clean Rotation System) Acompaar a los nuevos empleados durante sus primeros 3 das Brindar retroalimentacin continua y entrenamiento en el desempeo Apoyar a la gerencia en el ma

Pembroke Pines, FL • (24.3 miles) • Full Time • 9/30/2026

MEP Design Firm requires CAD Operator AUTOCAD/REVIT Responsible for preparing technical drawings for various industries. Draft technical details Specify dimensions, materials and procedures Minimum four years experience in AUTOCAD Good communication and organizational skills Construction background or experience a plus Preferably Bilingual English/Spanish

Fort Lauderdale, FL 33323 • (15 miles) • Full Time • 9/30/2026

Job Purpose The Quality Control Inspector- DER/PMA ensures aviation articles meet manufacturer and operator specifications, including Dimensions, condition, operational limits, and compliance with the company’s Quality Management System. This role is critical in maintaining adherence to quality procedures, customer requirements, and regulatory standards set by federal and other governing agencies. Essential Job Functions: Conduct thorough inspections using various methods to assess product airworthiness. Interpret engineering publications, shop travelers, FAA regulations, and manufacturer technical data and drawings to define inspection scope. Determine optimal inspection techniques and sequence of operations. Use precision measuring instruments to verify part dimensions, tolerances, and c

Pompano Beach, FL • (9.6 miles) • Full Time • $15.00 to $16.00 / hr • 9/30/2026

This is a second-shift position with the following schedule: Monday, Tuesday, Thursday, and Friday from 2:30 p.m. to 10:30 p.m., and Saturdays from 6:30 a.m. to 2:30 p.m. This role performs short cycle repetitive tests and / or inspections involving knowledge of product and use of standardized measuring specifications and / or test instructions. This role will examine parts and / or assemblies, rejecting units which do not meet specifications. To complete these tasks, calipers, magnifier, specialized test equipment and work form inspection documentation, including blueprints and written specifications will be used. An understanding of and adherence to proper documentation practices is required. This role will be measured against established standards. Essential Duties and Responsibilities:

West Palm Beach, FL 33401 • (27.2 miles) • Full Time • 9/30/2026

About the Role: TeraWulf is building large-scale AI/HPC data centers, and the Mechanical Engineer will serve as an owner-side technical resource for mechanical design, tenant requirements, standards, and project execution. The role supports mechanical systems across data center projects, including chilled water plants, heat rejection, pumping systems, airside systems, liquid cooling infrastructure, CDUs, RDHx, CRAHs, fan walls, controls interfaces, and mechanical redundancy. The position works closely with external engineers, contractors, vendors, commissioning agents, operations teams, and tenant-facing commercial teams. Responsibilities · Support development of mechanical design standards, basis-of-design documents, specifications, reference architectures, and repeatable project template

Hialeah, FL 33014 • (31.2 miles) • Full Time • $55,000 to $60,000 / yr • 9/30/2026

We are seeking an experienced Draftsman to join our team in Miami, Florida. The ideal candidate will produce accurate shop and fabrication drawings, working closely with our engineering and production teams. The ideal candidate will have a strong technical background along with a knowledge of sheet metal fabrication. Responsibilities: · Create Detailed shop, fabrication, and as-built drawings. · Interpret blueprints and construction specifications. · Revise drawings based on field measurements and change orders. · Maintain drawing files and revision control. · Create Bill of Materials of the sheet metal components with their associated drawings and flat patterns. · Collaborate with internal teams, including sales, engineering, production, and customer service, to ensure customer satisfacti

West Palm Beach, FL 33412 • (31.5 miles) • Full Time • 9/30/2026

Synagro partners with stakeholders to clean our water, protect our environment and serve our communities by generating worth from what others consider waste. We work to protect the health of our water, our Earth and those who depend on them now and in the future. Synagro takes pride in having zero layoffs during the pandemic and the business continues to thrive during difficult times. What good is a job without great benefits to reward your hard work? Here are some highlights of what Synagro has to offer: 15 days paid time off 10 Holidays Medical/Dental/Vision (within 30 days of hire) Health Saving Account (HSA) with company match Flexible Spending Account (FSA) 401(k) with company match (fully vested upon hire) Career growth and promotional opportunities Tuition Reimbursement JOB SUMMARY

Miami, FL 33166 • (36.7 miles) • Full Time • 9/30/2026

Job Title: Crew Scheduler Reports To: Asst Manager Crew Scheduling Location: MIA Headquarters OBJECTIVE Global Crossing Airlines is looking to hire an experienced Crew Scheduler to assign flight crews efficiently and strategically to various flights while adhering to all regulatory compliance standards, ensuring optimal utilization of personnel while prioritizing safety and crew member well-being by managing schedules, coordinating with flight crews, and adapting to operational changes to maintain smooth flight operations. If you're hard-working, dedicated, willing to lead others and still have a sense of adventure Global Crossing Airlines is an ideal place for you. MINIMUM REQUIREMENTS AND QUALIFICATIONS: High school diploma or GED required At least 1 year of experience in scheduling, ope

Miami Lakes, FL • (30.8 miles) • Full Time • $80,000 to $100,000 / yr • 9/29/2026

Major Purpose Performs a variety of basic engineering tasks to establish processes and parameters on injection molding machines that will ensure the proper functioning of equipment and productivity of products produced. Must also be committed to the highest level of quality in everything that is done. Will also be responsible for assisting production with root cause analysis and assuring that all documentation is correct and in the proper place. Minimum Job Requirements ·Bachelor’s degree in engineering (ideally Plastics Engineering Technology), or, Minimum 5 years of experience in Automotive / Medical precision Injection Molding in the related field and a preferred min of 10 years within the injection molding industry. ·Highly skilled in plastic injection molding process optimization usin

Boca Raton, FL 33431 • (8 miles) • Full Time • 9/29/2026

Hazen and Sawyer is seeking an experienced electrical engineer to join our South Florida team in the Coral Gables, Hollywood or Boca Raton offices. This is a hybrid role (3 days in office, 2 remote). This individual would provide electrical engineering and design for water and wastewater facility projects, serving as lead electrical engineer when required. The ideal candidate will be experienced in power design, including medium and low voltage electrical power distribution, generator design, motor control, VFDs, lighting systems, equipment layout, and related activities. We are looking for someone with strong communication skills, including interaction with other engineers, clients, and contractors. Why Hazen and Sawyer: Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Wi

Fort Lauderdale, FL 33313 • (13.8 miles) • Full Time • 9/29/2026

Description: The Scientist I, QC Analytical, is an experienced individual contributor responsible for independent execution, maintenance, and scientific oversight of GMP analytical methods supporting raw material, in-process, release, and stability testing. This role serves as an assay subject matter expert (SME) and key technical support for QC operations, method lifecycle activities, and investigations. The Scientist I provides scientific leadership within the laboratory, drives troubleshooting efforts, and ensures consistent compliance with GMP and data integrity requirements. Requirements: Perform Protein Characterization, Routine Testing or In-Process Support testing as required including: ELISA, SOS PAGE, IEF, HPLC, Western Blot, BCA, Capillary Electrophoresis, cell-based assays, spe

Weston, FL • (20.5 miles) • Full Time • 9/29/2026

Inspects manufactured goods during the manufacturing process. Conducts dimensional and electrical inspection of sub-assemblies or final system assemblies. Interprets prints, manufacturing drawings, diagrams, wire cards, and lists to approve or reject in-process or final assemblies. This position requires knowledge that is acquired through experience, specialized education or training. The role has clearly defined procedures and tasks, as well as defined guidelines, to aid in decision-making. The job requires a basic understanding of work routines and procedures in one's own discipline. The technical procedures for this level are well defined. The job is expected to follow detailed and defined rules/instructions and to make simple judgments in straightforward situations. Typically requires

Pembroke Pines, FL 33028 • (24.1 miles) • Full Time • $18.00 / hr • 9/29/2026

To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Duties and Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Responsible for all documentation of Association violations –inspections as necessary – understands regulations and rules as provided by Board and PM Track violations for completion and documents compliance. Repeat inspections as necessary within time frame determined for violations compliance Primary contact for all non-compliance letters and follow-up to compliance or fine. Provide PM with all documentation requesting compliance and resol

West Palm Beach, FL • (28 miles) • Full Time • $22.00 to $25.00 / hr • 9/29/2026

Key Responsibilities Equipment Inspection & Maintenance Perform CAT Inspect evaluations on all rental returns and accurately document equipment condition, damage, and deficiencies, including photographs and detailed findings. Communicate inspection results and repair requirements to Rental Coordinators and management. Identify and report damaged attachments to minimize repair costs and downtime. Perform minor repairs and preventive maintenance including filters, batteries, lights, mirrors, body panels, decals, lubrication, and attachment installation/testing. Assist with equipment troubleshooting and basic diagnostics. Rental Fleet Readiness Prepare equipment for rental in a timely manner and ensure units are rental-ready. Maintain a customer-focused mindset by ensuring equipment is delive

Miami, FL 33167 • (32.2 miles) • Full Time • $65 to $70,000 / yr • 9/29/2026

Company Overview Higgins Premium Pet Foods has been a trusted name in premium companion bird nutrition for more than 40 years. As part of Versele, a global leader in premium animal nutrition, we combine the agility of a small company with the strength, resources, and long-term vision of an international organization. At Higgins, every employee has the opportunity to make a meaningful impact. We value initiative, ownership, and continuous improvement. If you enjoy working in an environment where your ideas are heard, your contributions matter, and you can help shape the future of our operations, you'll fit right in. About the Role We are looking for a hands-on, self-driven Maintenance Manager to take ownership of our maintenance department. You will start by running the day-to-day backbone

Miami, FL 33167 • (32.2 miles) • Full Time • $70,000 to $80,000 / yr • 9/29/2026

Overview Hiring: Plant Scheduler Company : Artistic Pavers, Mfg. Location: Miami, FL Reports To: Plant Manager Employment Type: Full-time/ Exempt Hours: 8:00 am – 5:00 pm, Mon - Fri Pay Range: $70k - 80k , Salary based on qualifications What is in it for you Insurance Benefits – Medical, Dental, Vision, FSA, Disability, ADD, Life 401K, company Match Paid Time Off, paid Holidays, Vacation, Sick Pay Opportunity to grow with company Positive work environment Summary We're looking for a Plant Scheduler to own the daily rhythm of our Miami plant. You'll be the person who turns customer orders and delivery commitments into a real, workable production schedule coordinating closely with our Sales, Customer Service, Production, and Distribution teams to keep everyone aligned and the plant running s

Miami, FL • (39.2 miles) • Full Time • 9/29/2026

Description: Stowers Machinery is proud to expand from East Tennessee into Southern Florida through the opening of Coastal Construction Equipment, LLC , the region's CAT Compact Equipment Dealer. This expansion strengthens our ability to provide customers with exceptional sales, rental, parts, and service support. Don't miss the opportunity to join our team during this exciting period of growth and help build the future of our Southern Florida operation. Apply today! The Coastal Construction Compact Equipment Shop Technician is responsible for diagnosing, repairing, servicing, and performing preventative maintenance on compact construction and utility equipment in both shop and field environments. This position supports daily service operations by completing work orders safely, efficiently

Jupiter, FL • (40 miles) • Full Time • $85,000 to $130,000 / yr • 9/29/2026

JOB SUMMARY Ownership of manufacturing for industrial gas turbine cases produced by sand casting and machining.Ensure that turbine cases meet metallurgical, dimensional, and quality standards. The manufacturing engineer leads the integrated product team (IPT) to develop and deliver the products with a focus on quality, cost and on-time delivery. This role develops and builds the knowledge base and best practices for manufacturing across the product line. The manufacturing engineer also create the routers, work instructions, assembly instructions and maintenance documentation. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential functions of the job include, but are not limited to, the following: Establish technical acceptance criteria for the manufacture of industrial gas turbine cases. Coo

Fort Lauderdale, FL 33309 • (11.7 miles) • Full Time • 9/29/2026

Overview Primo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets. Compensation $19.00 Hourly Shift: Second shift 1pm to 9:30pm *Needed flexibility to work additional hours and weekends if needed* Location: Fort Lauderdale, FL We are hiring for several seasonal positions with potential to last up to six months. Seasonal assignments offer valuable work experience at a leading beverage company. Also, if opportunities exist at the end of the assignment, you can be considered for a full-time permanent position with Primo Brands. Individuals in temporary a

Deerfield Beach, FL • (7 miles) • Full Time • $90,000 to $150,000 / yr • 9/29/2026

Description Electrical Engineer or Electrical Designer (Building Systems, MEP Consulting) Location: Deerfield Beach, Florida (Onsite, fixed location) Employment Type: W2 Compensation: $80,000–$110,000 base salary (negotiable for strong candidates; may exceed range for Professional Engineers) Schedule: Flexible hours; deadline-driven consulting environment Travel: None specified About the opportunity An established MEP consulting engineering team is hiring an Electrical Engineer or Electrical Designer to support building systems design from concept through construction. Responsibilities Electrical design production Design power, lighting, security, and low-voltage systems for buildings Prepare electrical plans, specifications, and construction documents Calculations and layout Perform elect

Boynton Beach, FL 33435 • (15.8 miles) • Full Time • $21.00 to $24.00 / hr • 9/29/2026

Benefits: Bonus based on performance Opportunity for advancement Paid time off Training & development We are seeking a detail-oriented Quality Assurance Representative to monitor and evaluate interactions between our representatives and clients to ensure compliance with company policies, regulatory requirements, and customer service standards. This role is critical in maintaining operational excellence and protecting both our clients and the organization. The ideal candidate will have experience in debt settlement, financial services, or call center quality assurance and possess strong analytical and communication skills. Key Responsibilities Monitor and evaluate inbound and outbound client calls to ensure adherence to company policies, scripts, and regulatory requirements. Review client f

Hollywood, FL 33019 • (23.5 miles) • Full Time • 9/28/2026

Lead Electrical Designer / Engineer Company Name: MGE Engineering Location: Hollywood, FL Project Focus: Commercial, Institutional, and Complex Building Electrical Systems Work Setting: Hybrid / In-Office Salary: $115,000 – $145,000 + Performance Bonus & Full Benefits Package Recruited Exclusively By: Luxus | AEC Talent Partners Position Overview Are you an experienced electrical design professional ready to step out of the production queue and lead multi-faceted project teams from conceptual layout to final construction? We are seeking a Lead Electrical Designer / Engineer to direct and elevate our trade-specific engineering initiatives. In this role, you will serve as both a technical authority and a project managerleading project teams, quarterbacking complex trade-specific schematics,

Hialeah, FL 33016 • (32.2 miles) • Full Time • $25.00 to $30.00 / hr • 9/28/2026

Quality Inspector Aerospace Innovations – Hialeah, Fl Job Type: Full-time, Permanent (In-Shop) Position Summary: The Quality Inspector is directly responsible to the Quality Manager for overall inspection on aircraft engine accessories in accordance with 14 CFR Part 145 regulations and current technical data. This role executes incoming, hidden damage, preliminary, in-process, and final inspections, verifies tool calibration, ensures regulatory compliance, and oversees article identification. The inspector holds return-to-service authority and may be assigned to perform field maintenance work at off-location sites. Key Responsibilities: · Perform incoming, hidden damage, preliminary, in-process, and final inspections on aviation articles in accordance with manual procedures and current tec

Coral Gables, FL • (44.8 miles) • Full Time • 9/28/2026

MEP firm seeking CAD operator. Responsibilities: Drafting mechanical, electrical, plumbing, and fire protection drawings from Engineer markups. Preparing PDFs for submittal. File management: receiving files from clients and updating backgrounds, xrefs, etc. Qualifications: AutoCAD experience REQUIRED Revit experience preferred Ability to prioritize and multitask Ability to work independently