FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Details Department: Radiation OncologySchedule: Weekdays 0800-1630. Occasional evening and weekend hours as needed.Hospital: Columbia St. Mary's MilwaukeeLocation: Milwaukee, WIBenefits Paid time off (PTO) Various health insurance options & wellness plans Retirement benefits including employer match plans Long-term & short-term disability Employee assistance programs (EAP) Parental leave & adoption assistance Tuition reimbursement Ways to give back to your communityBenefit options and eligibility vary by position. Compensation varies based on factors including, but not limited to, experience, skills, education, performance and salary range at the time of the offer.Responsibilities Ensure the quality of care in the use of radiation-producing sources and imaging equipment, while protecting patients and staff from radiation.Perform required calibrations on equipment. Recommends and justifies new equipment and products for the department.Conduct equipment performance reviews as needed and implements quality control procedures for imaging devices.Recommend radiation safety procedures to areas using radiation.Educate staff in radiation safety practices.Support all physics aspects of patient treatment including consultation with radiation oncologists, calculation of radiation doses, design and fabrication of treatment aids and assurance of the accuracy of all treatment parametersRequirements Licensure / Certification / Registration:Medical Physicist credentialed from the American Board of Radiology obtained within 36 Months (3 years) of hire date or job transfer date required.Education:High School diploma equivalency with 2 years of cumulative experience OR Associate's degree/Technical degree OR 4 years of applicable cumulative job specific experience required.Additional Preferences No additional preferences.Why Join Our Team Ascension Wisconsin has been providing rewarding careers to healthcare professionals since 1848. Operating 17 hospital campuses and over 100 related healthcare facilities from Racine to Appleton, you will find opportunities that allow you to create a career path you love, all while delivering compassionate, personalized care to the communities we serve.Ascension is a leading non-profit, faith-based national health system made up of over 134,000 associates and 2,600 sites of care, including more than 140 hospitals and 40 senior living communities in 19 states.Our Mission, Vision and Values encompass everything we do at Ascension. Every associate is empowered to give back, volunteer and make a positive impact in their community. Ascension careers are more than jobs; they are opportunities to enhance your life and the lives of the people around you.Equal Employment Opportunity Employer Ascension will provide equal employment opportunities (EEO) to all associates and applicants for employment regardless of race, color, religion, national origin, citizenship, gender, sexual orientation, gender identification or expression, age, disability, marital status, amnesty, genetic information, carrier status or any other legally protected status or status as a covered veteran in accordance with applicable federal, state and local laws.For further information, view the EEO Know Your Rights (English) poster or EEO Know Your Rights (Spanish)poster.As a military friendly organization, Ascension promotes career flexibility and offers many benefits to help support the well-being of our military families, spouses, veterans and reservists. Our associates are empowered to apply their military experience and unique perspective to their civilian career with Ascension.Pay Non-Discrimination NoticePlease note that Ascension will make an offer of employment only to individuals who have applied for a position using our official application. Be on alert for possible fraudulent offers of employment. Ascension will not solicit money or banking information from applicants.This Ministry does not participate in E-Verify and therefore cannot employ STEM OPT candidates.

Welding Engineer The Welding Engineer will be responsible for driving innovation and ensuring excellence in welding processes, creating comprehensive work instructions, driving process improvements, designing and implementing welding fixtures, and ensuring quality standards are met throughout the welding processes. This role requires a blend of technical expertise, innovation, and hands-on experience to enhance productivity and ensure the highest quality in welding operations working closely with cross-functional teams to achieve operational excellence. As a Welding Engineer you will: Work Instructions Development: Develop detailed and clear standards and work instructions for welding processes, ensuring alignment with production goals, safety standards, and quality requirements.Provide training and technical guidance to production staff on welding techniques and procedures.Process Improvement: Analyze current welding processes and identify opportunities for efficiency improvements and cost reductions.Propose and implement KPI to measure and improve welding performancesImplement best practices and new technologies to enhance welding performance productivity and reduce defects.Collaborate with cross-functional teams to streamline workflow and optimize production operations.Fixture Design & Implementation: Design, develop, and implement custom welding fixtures and jigs to improve process consistency and efficiency.Coordinate with engineering and production teams to ensure fixtures meet operational requirements.Conduct testing and validation of fixtures to ensure proper functionality.Quality Assurance: Establish and maintain quality control processes for welding operations, ensuring adherence to specifications and standards (e.g., AWS, ISO).Investigate welding defects and implement corrective and preventive actions.Prepare and review documentation, including inspection reports and weld procedure specifications (WPS).Collaboration and Documentation: Work closely with engineering, production, and quality teams to ensure smooth communication and project execution.Maintain accurate records of welding processes, updates, and improvements. We are looking for someone who: Holds a Bachelor's degree in Welding Engineering, Mechanical Engineering, or a related field.Has proven experience as a Welding Engineer or similar role in a manufacturing or industrial environment.Possesses strong knowledge of welding processes (e.g., MIG, TIG, SMAW, FCAW) and materials (e.g., metals, alloys).Has proficiency in CAD software for fixture design and layout.Has familiarity with welding standards and codes (e.g., AWS, ASME, ISO).Possesses Excellent problem-solving skills and a detail-oriented approach.Has strong communication and teamwork skills, with the ability to collaborate across departments. Ideally you will also have: Certification as a Welding Inspector (CWI) or Welding Engineer.Experience with automation and robotic welding systems.Knowledge of Lean Manufacturing and Six Sigma methodologies. The Physical Demands / Working Conditions are: Combination of office, production floor, and testing areas.May involve occasional lifting and exposure to welding environments.Flexibility to travel, if required What we offer you: Typical pay is $80,000 - 110,000 annually. Please note the pay information shown above is a general guideline. Pay is based upon candidate skills, experience, and qualifications. This position is eligible for participation in our Quarterly Incentive Pay Program G&W Electric offers a comprehensive benefits package that includes: Medical, Dental and Vision InsuranceShort and Long-Term DisabilityLife InsuranceHealth club membership program and reimbursementEmployee Assistance ProgramTuition Reimbursement401 (k) Annual Profit SharingVacationAir-conditioned/heated state-of-the-art manufacturing facility About G&W Electric Innovating since 1905, G&W Electric has grown into a global leader in engineered electrical power grid solutions. Working with us means joining a worldwide team of passionate manufacturing professionals striving to continually improve the technologies the world depends on to deliver safe, reliable electricity. Our culture is focused on employee success, so we foster an entrepreneurial environment that encourages everyone to thrive. Learn more about our company by watching this video: https://www.youtube.com/watch v=DMtAhsdYeUQ G&W Electric enjoys a long reputation for product quality, innovation and world-class customer service to the power industry. We have established this reputation by believing that our greatest asset is our employees. We owe our success to the initiative and talents of highly skilled individuals within our team-based organization. Our goal is to set the standard for customer satisfaction by ensuring a superior level of service, performance and innovation. As a global organization and industry leader, we are committed to cultivating an engaging work environment that embraces our core values and develops our talent. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success. As part of our organization, you also help power the world! G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. G&W Electric participates in the E-Verify process for all new hires. *G&W Electric participates in the E-Verify process for all new hires. VEVRAA Federal Contractor

Build your best future with theJohnson ControlsteamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe.You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of theJohnson Controlsfamily and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What we offerCompetitive salary and bonus planPaid vacation/holidays–15 days of vacation first year plus Sick-TimeComprehensive benefits package including 401K, medical, dental, and vision care –Available day oneExtensive product and on the job/cross training opportunitiesWith outstanding resourcesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyCheck us Out:A Day in a Life atJohnson ControlsWhat you will do:This position will fill a role in the Central Region of the United States, specifically working as the Lead Engineer on major projects and will require travel, up to 50%.Be responsible for the design, configuration, and operation of complete building control systems including fire, security, and other low voltage control sub-systems (i.e. lighting, nurse call, data networks, etc.) to meet the intent of the project requirements.Effectively communicate with the Project Manager to develop a strong team. Accountable to field teams for quality, timeliness and efficiency of designs. Develop sophisticated software programs, commissions and solves problems to ensure proper operations of the building control system.Provide detailed information and submittals to communicate design and operation to customers, consultants,Johnson Controlsfield installation team and subcontractors.How you will do it:Designs and configures technically sophisticated building control systems as defined by the contract documents.Builds flow diagrams, sequence of operations, bill of material, network layouts and electrical schematics as required.Develops and tests software programs vital to operate the system per the intent of the project requirements.Coordinates the creation of vital drawings and equipment schedules for submittals and installation.Selects, orders, and supervises the delivery of materials for assigned projects.Coordinates factory-mounting processes to meet factory and project schedule.Assists in the loading and commissioning of all system and network-level controllers as required.Assists in validation of complete system functionality and solves problems with subcontractors and other trades to ensure proper operation.Provides field change information to the project team for the creation of as-built drawings and software.Keeps management and JCI contractor or customer advised of job progress and issues.Assists in performing site-specific training for owner/operator on the total building control system.Participates in release meeting with project field team.Performs value engineering.Provide cost effective results while maintaining customer satisfaction.Adheres to safety standards. High degree of regard to employee and subcontractor safety.What we look for:RequiredMinimum of 2-4 years of experience, or an associate degree in a related technical field with seven years of relevant work experience required.PreferredBachelor’s degree in engineering with a minimum of 2 years of experience, or an associate degree in a related technical field with five years of relevant work experience required.Proven knowledge of the construction or HVAC industry.Demonstrated knowledge of control theory, automatic temperature controls, building automation systems and other building subsystems.Proven experience in the integration of low voltage building sub-systems using various industry protocols (i.e. LON, BacNet, etc.).Ability to relate technical knowledge to a non-technical audience.Proven advanced computer skills required, particularly computer-related drafting tools.HIRING SALARY RANGE: $ 73,055 - $ 105,700(Salary to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This position includes a competitive benefits package. For details, please visit the Employee Benefits tab on our main careers page at https://www.johnsoncontrols.com/careers#LI-AD2#LI-DS1

Who We Are: We're powering a cleaner, brighter future.Exelon is leading the energy transformation, and we're calling all problem solvers, innovators, community builders and change makers. Work with us to deliver solutions that make our diverse cities and communities stronger, healthier and more resilient.We're powered by purpose-driven people like you who believe in being inclusive and creative, and value safety, innovation, integrity and community service. We are a Fortune 200 company, 19,000 colleagues strong serving more than 10 million customers at six energy companies -- Atlantic City Electric (ACE), Baltimore Gas and Electric (BGE), Commonwealth Edison (ComEd), Delmarva Power & Light (DPL), PECO Energy Company (PECO), and Potomac Electric Power Company (Pepco).In our relentless pursuit of excellence, we elevate diverse voices, fresh perspectives and bold thinking. And since we know transforming the future of energy is hard work, we provide competitive compensation, incentives, excellent benefits and the opportunity to build a rewarding career.Are you in Primary Purpose: PRIMARY PURPOSE OF POSITIONLead activities relating to designing, building, testing, implementing, and maintaining solutions, products, and processes under the guidance of a Principal Data Engineer or Manager. Coach and/or mentor less experienced team members. Primary Duties: PRIMARY DUTIES AND ACCOUNTABILITIESPlan all tasks within a SDLC phase including estimating, scope definition and work plan development. Coordinates planning, design and production of deliverables for the training phase. Sought by others for advice. Assists in reviewing deliverables of the SDLC phase. Develops accurate budgets and schedules tasks/staffing. Participates in the integration of this phase to others. Reviews all tasks within a phase to ensure overall quality and accuracy. (System Development Life Cycle) (40%)Maintain and enhance engagement with business and IT partners and other stakeholders (20%)Create documentation for products and services. Use best practices to improve products and services provided to business unit partners, and monitor adherence within Team/Group to standards as defined within the Management Model (15%)Establish positive team environment by assisting and training less experienced personnel. (15%)Proactively build and develop others' technical knowledge and business acumen (10%) Job Scope: JOB SCOPESolves moderate to highly complex problems, inclusive of partner with vendors and other IT professionals to do so. (Critical Thinking & Problem Solving) Can function as a liaison with database administration to communicate data requirements that must be implemented in a DBMS. Has knowledge of at least one DBMS. Able to code and implement extensions to a data dictionary or repository. (Data Warehouse) Develops security policies and guidelines for users and management. Guides the development of business rules of use as they relate to data security. Creates procedures for data access, protection, and backup. Works closely with cyber threat intelligence analysts, cyber forensics analysts and incident response teams to understand how their challenges can be addressed with data analysis and data science efforts. (Data Security) Independently makes informed decisions on monitoring settings such as sample size, level of criticality, and self-healing opportunities. (Troubleshooting & Monitoring) Contributes to strategic planning in areas which require expert Big Data knowledge and experience. Participates in advanced technology efforts for the company, evaluating and testing new products to determine their value and applicability to the organization. Often takes a lead role in critical situations where there is a need to apply knowledge of Big Data technological trends, emerging technology and/or new tools and products. Successfully selects and implements Big Data technology to meet requirements of state-of-the-art systems and projects. (Big Data Technologies) Drives innovation process with regular evaluation and consistent application of lessons learned while implementing innovative improvements for future tasks. (Innovation) Works under limited supervision. Minimum Qualifications: MINIMUM QUALIFICATIONSBachelor's degree in computer science or related discipline and 4-7 years' relevant experience in data warehouse design, business intelligence reporting and ETL/TLT processing or 6-9 equivalent combination of education and work experience.Demonstrates high levels of knowledge in new and emerging Big Data technologies. (Big Data Technologies)Understands how work contributes to the bottom line. (business acumen)Maintain advanced knowledge of new technologies or technology opportunities and analysis of their use for business and/or IT clients. Develops white papers, conducting presentations as needed. (Cloud Technologies)Detailed knowledge of the data architecture of the systems which support more than one core business area. (Data Architecture)Mastery of Data Interpretation in practical applications of a difficult nature. (Data Interpretation)Demonstrates a thorough understanding of industry data security standards including trends and advancements. (Data Security)Has designed and implemented enterprise-wide standards, including business definitions and naming standards. (Data Warehouse)Demonstrates successful collaborative negotiation skills. Capable of building trust and gaining commitment in volatile environments to achieve results. Able to take a firm bargaining position while maintaining harmony with others. (Negotiation Skills & Relationship Management & Consulting)Experience performing as a team leader contributing to the effectiveness of the interview team with stakeholders to identify business needs and opportunities. (Requirements Gathering)Proficient in PowerShell, Ansible, or other appropriate scripting tool and able to independently create, modify, and troubleshoot scripts for automation, reporting, and monitoring tasks. (Scripting/Automation)Demonstrates a high proficiency for disseminating information to users, management, customers and others who have limited knowledge of the subject. (system documentation)Demonstrates expertise in resolving challenging problems involving usage of a variety of tools. (Technical Tools and Products)Demonstration of advanced capabilities to apply monitoring tools. (Troubleshooting & Monitoring) Preferred Qualifications: PREFERRED QUALIFICATIONSPossess expertise in cloud technologiesProficient in the Azure cloud platform and its applicationsExperience in Databricks technologies with Databricks warehouse expertiseExperience in ODI, IDMC, ADF, Synapse o Familiarity on Oracle Golden Gate, cosmos DB, Hyperscale DBProficient with big data technologies such as SparkExperienced in data cleaning, preprocessing, and transforming data into readable formats for analysisComprehensive understanding of ETL and data warehouse conceptsCapable of managing multiple ongoing projects and ensuring timely deliveryOptimizing techniques for different data Format (SCD1,2, Parquet, GIS, Timeseries)Experience writing technical design specifications for data integrations and data transformations with structured and unstructured data.Experience with Scrum development methodologyExperience with writing business cases. Experience in capturing, analyzing and translating business needs into functional IT requirementsExperience developing data integrations and data transformations with structured and unstructured data. SQL (DML, DCL, DDL) expertise with Oracle 11g through 12c and Microsoft SQL Server 2008r2 through 2016Experience with the setup and configuration of Automic UC4 scheduler on RHEL, Oracle Data Integrator (ODI), Oracle Warehouse Builder (OWB), Oracle Business Intelligence (OBI), Oracle Enterprise Manager (OEM), Oracle HTTP Server (OHS), WebLogic, Informatica, Business Objects, SAS software for data analytics, Kafka, Nifi, UC4, Red Hat Enterprise Linux.Application re-engineering, data modeling and performance tuning. Architecture and design for application disaster recovery and high availability: HP ALM, Microsoft Azure DevOps, Customer Information Systems (for example: CIMs, CC&B, SAP CRM&B),AMI Meter Data Management Systems (for example: Oracle Utilities MDM, Itron IEE), Geographic Information Systems (for example: GE Smallworld), Outage Management Systems, Itron/SSN UtilityIQ, Xylem/Sensus AMI, OSI Soft PI HistorianExperience managing IT projects using Agile/Scrum and waterfall methodologies Benefits: BenefitsAnnual salary will vary based on a candidate’s skills, qualifications, experience, and other factors: $109,600.00/Yr. – $150,700.00/Yr. Annual Bonus for eligible positions: % 401(k) match and annual company contributionMedical, dental and vision insuranceLife and disability insuranceGenerous paid time off options, including vacation, sick time, floating and fixed holidays, maternity leave and bonding/primary caregiver leave or parental leave Employee Assistance Program and resources for mental and emotional supportWellbeing programs such as tuition reimbursement, adoption and surrogacy assistance and fitness reimbursementReferral bonus programAnd much moreNote: Exelon-sponsored compensation and benefit programs may vary or not apply based on length of service, job grade, job classification or represented status. Eligibility will be determined by the written plan or program documents.

ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday

Microgrid Automation Engineer III This position will be the technical lead and programmer for the integration of switchgear automation to G&W Electric's proprietary, grid-scale 2.4 MW microgrid, providing project management and customer support. As an Automation and Microgrid Engineer III you will: Assist with G&W switchgear automation solution proposals that include written functional description and pricing. Apply advanced product knowledge of relays, programming, and communication in switchgear distribution automation applications. Provide pre and post sales technical support to sales/marketing, production engineering, and customers for customized distribution automation solutions.Project Manage Distribution Automation projects from Quoting stage through Customer site acceptance without assistance from supervisor.Design logic, program relays and controllers, and test systems as required for projects.Develop flexible program templates and software solutions that can be combined with hardware for customizable product packages Manage technical relationship with key DA technology vendorsAssist Production Engineering with minor modifications as necessary for specific customer applications.Train and assist customers with installations and commissioning including on-site activities as necessary.Have the ability to function in cross-functional work teams.Make technical presentations to customers, clients, and/or professional peers.Provide technical assistance and training for peers and sales staff.Act as a mentor to new Automation Engineers to ensure they become proficient with LaZer solutions and successfully assimilate into the DA team.Have the ability to perform event analysis for all G&W automation solutions.Work with customers to write and present papers about the G&W automation solution provided to them.Maintain positive client interactions.Keep up to date with industry trends by attending conferences, and training courses. G&W MICROGRID-RELATED RESPONSIBILITIES: Act as in-house expert in all control systems in the Microgrid.Manage vendor relationships, especially with engineering groups.Manage periodic maintenance and testing of all software systems. Perform upgrades as necessary.Monitor microgrid system functionality. Troubleshoot and correct as needed.Support G&W's Microgrid Engineer in day-to-day operations as necessary.Supplement all periodic maintenance performed by Microgrid Engineer and act as a backup.Manage the microgrid operational schedule to maximize the return on investment of use cases while ensuring battery is prepared to support and handle highest priority scenarios.Maintain and be responsible for the G&W Customer Solution Center Microgrid control room.Support all microgrid use cases; especially advanced use cases including islanding, reconnection and DERMS integration We are looking for someone who: Holds a Bachelor's Degree in Electrical Engineering. Has 7+ years of progressive experience in Engineering design and/or development preferred. Preferred technical knowledge: Three Phase power systems including: Symmetrical componentsLoad flowOver current protection functionsRelay integration and logic programming for: SEL, ABB, Hitachi, Siemens and/or GE relaysCommunications including: StandardsFiber Optic Cable Selection and ApplicationRadio Communication and Antenna SelectionCellular Communication and Antenna SelectionTypical primary Voltage and Current test proceduresElectromagnetics and the application of motors, transformers, and generators on the power distribution systemMust have excellent interpersonal skills and ability to communicate with peers and internal and external customers. Has strong industrial / utility programming understanding and skills with a strong preference for relay programming. Has training and/or experience in relays and switchgear and electrical troubleshooting. Possesses knowledge of MS Windows, Word, Spreadsheet and project applications is required.Has the ability to travel overnight 30-40% and on weekends. What we offer you: Typical pay is $83,948 - 109,163 annually. Please note the pay information shown above is a general guideline. Pay is based upon candidate skills, experience, and qualifications. This position is eligible for participation in our Quarterly Incentive Pay Program G&W Electric offers a comprehensive benefits package that includes: Medical, Dental and Vision InsuranceShort and Long-Term DisabilityLife InsuranceHealth club membership program and reimbursementEmployee Assistance ProgramTuition Reimbursement401 (k) Annual Profit SharingVacationAir-conditioned/heated state-of-the-art manufacturing facility About G&W Electric Innovating since 1905, G&W Electric has grown into a global leader in engineered electrical power grid solutions. Working with us means joining a worldwide team of passionate manufacturing professionals striving to continually improve the technologies the world depends on to deliver safe, reliable electricity. Our culture is focused on employee success, so we foster an entrepreneurial environment that encourages everyone to thrive. Learn more about our company by watching this video: https://www.youtube.com/watch v=DMtAhsdYeUQ G&W Electric enjoys a long reputation for product quality, innovation and world-class customer service to the power industry. We have established this reputation by believing that our greatest asset is our employees. We owe our success to the initiative and talents of highly skilled individuals within our team-based organization. Our goal is to set the standard for customer satisfaction by ensuring a superior level of service, performance and innovation. As a global organization and industry leader, we are committed to cultivating an engaging work environment that embraces our core values and develops our talent. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success. As part of our organization, you also help power the world! G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. G&W Electric participates in the E-Verify process for all new hires. *G&W Electric participates in the E-Verify process for all new hires. VEVRAA Federal Contractor

Who We Are: We're powering a cleaner, brighter future.Exelon is leading the energy transformation, and we're calling all problem solvers, innovators, community builders and change makers. Work with us to deliver solutions that make our diverse cities and communities stronger, healthier and more resilient.We're powered by purpose-driven people like you who believe in being inclusive and creative, and value safety, innovation, integrity and community service. We are a Fortune 200 company, 19,000 colleagues strong serving more than 10 million customers at six energy companies -- Atlantic City Electric (ACE), Baltimore Gas and Electric (BGE), Commonwealth Edison (ComEd), Delmarva Power & Light (DPL), PECO Energy Company (PECO), and Potomac Electric Power Company (Pepco).In our relentless pursuit of excellence, we elevate diverse voices, fresh perspectives and bold thinking. And since we know transforming the future of energy is hard work, we provide competitive compensation, incentives, excellent benefits and the opportunity to build a rewarding career.Are you in Primary Purpose: This position reports into the Utility Communication (UComm) Department in the TechOps Organization to provide technical expertise to support delivery and maintenance of IT solutions related to the Cyber, Fiber Optics, Firewall, Real Time Networks, SmartGrid, Transport (SONET/DWDM) and Wireless (RF) Communication technologies supporting Exelon.Position willsupport technical leadership supporting the engineering, deployment, integration and strategic strategy of high available telecommunications technologies throughout the Exelon Companies in accordance with established strategy and architecture, including leadership supporting the migration away from legacy communications and implementing secure IP based network infrastructure in the substations throughout the Exelon in accordance with established strategy, architecture, NERC/CIP requirements enabling application communication.This role will work in collaboration with the network team, their leadership, enterprise business partners, vendors and project/design teams, in all aspects of the secure & reliable transport of IP networks throughout Exelon's large & complex enterprise and real time operational environments.A primary function of the role will support internal and external audit and compliance activities in accordance with industry control frameworks such as NIST Cyber Security-Framework, ITIL, NERC CIP and TSA Security Directives. Coordinate audit response within the IT organization. Ensure IT systems and processes support industry standards and best practices.Note: This is a hybrid position (in-office with remote flexibility). Employees are required to be in office at least three days per week (Tuesday, Wednesday, and Thursday).Must sit within our service areas in Chicago/Oakbrook Terrace, IL.No relocation is available Primary Duties: Provide expertise in compliance activities in accordance with industry control frameworks such as NIST Cyber Security-Framework, ITIL, NERC CIP, and TSA Security Directives. (40%)Support internal and external audits of company and industry standards. (15%)Work across the organization to continuously improve our processes and create new processes as the company and industry evolves. (10%)Maintain strong relationship working with the Utility business implementing projects and on-going maintenance of fiber infrastructure. Interfacing with and managing vendor partners supporting the construction ofcompany networks. (10%)Identify and provide Business and IT data on IT trends and issues. Participate in IT architecture review and standards setting. Lead the development of Design Standards, white papers, conducting presentations as needed to explain why a technology is being recommended by IT. (15%)Maintain technical knowledge and business acumen within own discipline or function (5%)Provide performance evaluations, career development feedback, and recognition as required. (5%) Job Scope: Maintains deep knowledge and understand of industry compliance standards and how to apply to Exelon.Maintains knowledge and understanding of utility telecommunications devices and how they tie together to form a cohesive communications architecture including related networking technologies across Exelon.Promotes knowledge via seminars, presentations and publications within IT and ExelonParticipates in technological innovation to drive new business opportunities and solve complex business problems.Supports Exelon policy, standards and governance while designing solutions or solving issues.Works under minimal supervision. Minimum Qualifications: Bachelors degree in Computer Science or related discipline and 4 - 7 years of relevant experience (telecommunication, electrical, computer engineering and related communication technologies) or 7+ equivalent combination of education and work experience.Knowledge of telecommunication engineering functions including network management platforms, inventory management and documentation systems.Experience working in a substation environment including detailed understanding of specific requirements and standards for SCADA and system protection communications.Thorough understanding of OSI layers 1, 2 and 3 with emphasis on layer 3 routing and addressing structure including BGP and ISIS routing protocols.Excellent communications skills- Able to effectively communicate highly technical information in non-technical terminology (written a verbal).Understanding of change management principles associated with new technology implementations.Strong organizational skills including the ability to develop a comprehensive configuration management program for telecommunication assets.Understanding of project management principles Preferred Qualifications: Detailed understanding of NERC/CIP security requirements.Understanding of TSA Security Directives.Understanding of NIST Cyber Standards and ITIL standards Benefits: BenefitsAnnual salary will vary based on a candidate’s skills, qualifications, experience, and other factors: $93,600.00/Yr. – $128,700.00/Yr. Annual Bonus for eligible positions: 15% 401(k) match and annual company contributionMedical, dental and vision insuranceLife and disability insuranceGenerous paid time off options, including vacation, sick time, floating and fixed holidays, maternity leave and bonding/primary caregiver leave or parental leave Employee Assistance Program and resources for mental and emotional supportWellbeing programs such as tuition reimbursement, adoption and surrogacy assistance and fitness reimbursementReferral bonus programAnd much moreNote: Exelon-sponsored compensation and benefit programs may vary or not apply based on length of service, job grade, job classification or represented status. Eligibility will be determined by the written plan or program documents.

Sr. NPD Project Engineer - Mechanical The Sr NPD Project Engineer will support product realization through cross-functional team collaboration. Responsible for managing portions of the new product design process As a Sr. NPD Project Engineer - Mechanical you will: Be responsible for leading portions of the design process, completing assigned tasks, assisting other members of the team, and helping to ensure project completion in accordance with the schedule.Develop schedules, coordinate and manage low complexity projects of with little to no supervision.Prepare budgets and defines resource needs for projects or parts of projects in area of responsibility.Assist with completion of the Product Realization Stage Gate Requirements.Be responsible for ensuring that project meets requirements of specifications and standards, while promoting error-proof assembly.Be responsible for creation of project test plan and completion of inside and outside test programs.Construct and test prototype components or assemblies as required in the development and approval process.Be responsible for reviewing test data and ensuring testing is in line with the test plan and pre-test calculations and meets or exceeds G&W requirements.Perform engineering analysis in design of new products and their subcomponentsPerform formal root cause analysis and troubleshooting on the new and existing products and processesPrepare written documentation of processes, material requirements, test results and project activity as required.Interface with purchasing and vendors in the selection and approval of component parts and assemblies.Provide Engineering support to Sales/Marketing and Manufacturing on new and existing products and processes.Consult with Customer representatives to discuss product requirements and specifications when design or manufacturing problems are involvedGive direction to supporting personnel such as Engineers, Designers, and Technicians.Follow established procedures for creation and maintenance of CAD databases and libraries.Participate in the review of engineering drawings prior to the release to manufacture. Responsible for final approval of applicable drawings.Ensure that selected parts and processes meet project and company goals for cost efficiency and reliability.Perform other duties as assigned possibly We are looking for someone with: A Bachelor's Degree in Mechanical Engineering5+ years progressive experience in Engineering design and/or development to include Experience working on highly technical and innovative projects with demonstrated ability to be constantly challenged with new problems3D parametric modelingRunning finite element modeling and check design feasibility within mechanical, thermal and multi-physics environment. Strong technical knowledge required in mechanism design, linkages, springs, statics, dynamics and material propertiesFamiliarity with various manufacturing methods to include casting, machining, molding, stamping and formingFamiliarity with new product development Stage Gate Process.The ability to write technical documents, like test reports, engineering standards and technical papers.The ability to read and interpret technical standards.The ability to effectively communicate (verbal, written, presentations) across all levels of the organization.Proven experience with Microsoft Office SuiteExperience with DFMEA and DOE required.Experience with GD&T and tolerance stack up analysis.The ability to use small hand and power tools. Ideally you will have: ProE/Creo and Finite Element analysis A history of creativity, innovation, and initiative. A self-starter driven to learn new methodologies.Experience in medium/high voltage electrical power systems a plusExperience with trip free, stored energy or actuated mechanism design a plus. The Physical Demands / Working Conditions of the role are: General Office Environment, PC useLight Lifting (occasional 25 lbs or less)StoopingStandingHeavy Lifting (frequent 25 lbs +) What we offer you: Typical pay is $94,200 - 122,500 annually. Please note the pay information shown above is a general guideline. Pay is based upon candidate skills, experience, and qualifications. This position is eligible for participation in our Quarterly Incentive Pay Program G&W Electric offers a comprehensive benefits package that includes: Medical, Dental and Vision InsuranceShort and Long-Term DisabilityLife InsuranceHealth club membership program and reimbursementEmployee Assistance ProgramTuition Reimbursement401 (k)Annual Profit SharingVacationAir-conditioned/heated state-of-the-art manufacturing facility About G&W Electric Innovating since 1905, G&W Electric has grown into a global leader in engineered electrical power grid solutions. Working with us means joining a worldwide team of passionate manufacturing professionals striving to continually improve the technologies the world depends on to deliver safe, reliable electricity. Our culture is focused on employee success, so we foster an entrepreneurial environment that encourages everyone to thrive. Learn more about our company by watching this video: https://www.youtube.com/watch v=DMtAhsdYeUQ G&W Electric enjoys a long reputation for product quality, innovation and world-class customer service to the power industry. We have established this reputation by believing that our greatest asset is our employees. We owe our success to the initiative and talents of highly skilled individuals within our team-based organization. Our goal is to set the standard for customer satisfaction by ensuring a superior level of service, performance and innovation. As a global organization and industry leader, we are committed to cultivating an engaging work environment that embraces our core values and develops our talent. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success. As part of our organization, you also help power the world! G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. G&W Electric participates in the E-Verify process for all new hires. *G&W Electric participates in the E-Verify process for all new hires. VEVRAA Federal Contractor

PREVENTING ENVIRONMENTAL HARMWe go to extraordinary measures to protect our Airmen from environmental hazards and infractions. Applying engineering and scientific principles, Bioenvironmental Engineers identify and evaluate potential dangers and develop programs to prevent illness and injury. With an emphasis on discovering problems before they occur, these specialists ensure the health and safety of Airmen and their families in environments all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor of Science in engineering from an ABET-accredited institutionQualificationsCompletion of qualifying Bioenvironmental Engineering courseMinimum of 24 months of experience in bioenvironmental engineering assignmentsCompletion of Officer Training School courseMust be between the ages of 18 and have not reached your 42ndbirthday