We are looking for a Diesel Mechanic to join our team!
Responsible for efficiently repairing, servicing and maintenance of diesel trucks, lifts, trailers, and small engines in the shop and field as needed.
Performs mechanical repairs, service, and preventive maintenance assigned by the Branch Management. Inspects and insures that all equipment is properly repaired or serviced on an ongoing basis. Completes all equipment check sheets as required. Completes work-orders accurately and records the work performed. Ensures that all parts, sublet labor, oil, and any other miscellaneous costs are included on the work-order. Stays current in all models of equipment used or operated by RoadSafe. Keeps assigned work area clean and organized. Maintains inventory levels of parts and shop supplies. Keeps track of RoadSafe tools and equipment. Informs Branch Management of any parts that are damaged, in need of replacement, or are unsafe. Helps train and supervise mechanic helpers. Works in compliance with established safety policies & procedures. Perform other duties as assigned by Branch Management. Works with vendors on cost improvement initiatives.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer
Qualifications: Ability to lift and carry 50 pounds several times per day, unaided Ability to push or pull 50 pounds several times per day, unaided Ability to climb over and into heavy equipment several times per day Ability to walk and stand on concrete and uneven surfaces for at least 4 hours Ability to bend or kneel and work with arms lifted for prolonged periods Welding and electronics experience required Ability to work around machines with moving parts and petroleum or chemical-based products, in excessive heat and cold Ability to wear personal protective gear is required Ability to display basic knowledge of DOT requirements as it relates to company fleet Ability to work extended or standby hours on an “on call” basis Must have ability to travel and stay overnight for a short amount of time depending on the project needs
Education and Experience: High school diploma or equivalent is required Must possess a basic understanding of hydraulic and electrical systems Must have experience in welding and metal fabrication Must have a valid driver’s license with a good driving record. CDL is a plus Must provide your own basic hand tools Experience operating construction equipment Must be able to successfully pass a drug test and DOT physical Must display basic computer skills
We are an Equal Employment Opportunity Employer Minority/Female/Disability/Veteran

We are looking for Invisible Fence Installers to join our team!
We offer PAID training, hourly pay, and Commissions on Sales at 8.5 percent!
Installs and services Invisible Fence® Brand Pet Solutions at customer’s homes using basic machinery, working with and training customers and pets, while following all company standards and procedures.
Install and Service assigned Invisible Fence® Brand Pet Containment Systems Effectively train Pets and Pet Owner how to use Invisible Fence® Brand solutions Maintain in good working order and cleanliness of all company vehicles and equipment assigned to Field Technician and report to General Manager any issue that requires additional maintenance Maintain Accurate Records Throughout the Install, Service and Train Process while adding install notes and multi-task between other systems, all accessible through a company provided smart phone
Schedule: Must be available to service the customer and take appointments between the hours of 8:00am - 6:00pm, Monday - Saturday, with last appointment availability starting at 6:00pm on a rotating schedule, 5 day work week including weekends if your rotation shift falls on a weekend. Must be available to work 2-3 Saturdays per month (50% Saturdays per month).
Benefits: Hourly Plus Commissions on Sales At 8.5% PLUS Paid Training! Yearly Merit Increases and Growth Opportunities! Company Provided Tools and Materials including Corporate Cell Phone Company Vehicle and Fuel Card Provided Full Benefits Package (Health, Dental, Vision), Eligible on your 31st day 401K plan with a 5% Match, Fully Vested after 6 months of employment Free Products up to $600 plus Discounts with Corporate Partners and $200 Pet Adoption Reimbursement 26 Paid Days Off, totaling 3 weeks and 1 day of PTO plus 11 Paid Holidays $5,250 Tuition Reimbursement Invisible Fence® Brand Swag!
Qualifications: High school diploma or equivalent 1 Year of Customer Service Experience Valid driver’s license, clear driving record and driving skills. Excellent Communication Skills Installation/Field Service Technician Experience Preferred, but Willing to Train the Right Candidate Flexible Schedule with availability between the hours of 8am-7pm, every other Saturdays and once per week, early team meeting to discuss weekly goals and get to know your team better. Enjoy Working as Part of a Team and Independently Must enjoy Driving, Drive Times May Be Long Enjoy Working for a Company that Truly Gives Back to The Community
We are an Equal Employment Opportunity Employer

JOIN THE US FOODS TEAM!Ready to build a career with a company that’s leading the foodservice industry Schedule: Tuesday - Saturday; 10 pm - 6 am (flexible on 3rd shift)$32.00/hour (some flexibility based on experience).$1.00/hour Night Shift DifferentialWeekly Pay!$7500 Retention Bonus (2 yr. pay out)Benefits on Day 1BENEFITS:medical, dental, vision, 401(k) Plan and Employee Stock Purchase Plan (ESPP) life insurance and paid parental leave. To review available benefits, please click here: https://www.usfoods.com/careers/benefits.html.ESSENTIAL DUTIES AND RESPONSIBILITIES:Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).Perform preventative maintenance within company standards.Complete documentation of all repair orders, PM list and parts accountability.Handle road service calls; perform road rescue/transport equipment as needed.Keep track of assigned repairs by logging in and out of the Shop Fax system.Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.Maintain inventory and proper recordkeeping.Backup to other maintenance shop personnel.Willingness and capacity to assume increased responsibility and certifications.Performs other duties as assigned.Must have (3) years of verifiable hands-on experience as a heavy duty commercial diesel mechanic or reefer mechanic or a combination of both; or (2) years verifiable hands-on experience with either Diesel Mechanic Certification or TK/Carrier Refrigeration Certification or both.Diagnostic and troubleshooting competency relating to equipment repairs.Successfully demonstrated independent analytical and problem-solving skills.Prior experience in administering appropriate PM program.Must furnish own personal hand tools.CDL A and DOT certified preferred.Knowledge/Skills/Abilities:Ability to comply with EPA and OSHA regulations as pertaining to the shop and fleet.Ability to read and understand technical and service manuals.Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills.Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.Ability to adapt to changing organizational and operational needs.Computer and software experience.Ability to work a flexible schedule including nights and weekends.Must be able to work overtime when needed.Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $31.00 and $35.00.This role will also receive overtime compensation. Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: https://www.usfoods.com/careers/benefits.html.

Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Tech I to join our UniFirst community. As a Team Partner in the Maintenance Department, you will handle repairs, maintenance, installation and troubleshooting of industrial equipment, systems, and components. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime! We have an immediate opening and provide on the job training. What’s in it for you Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth:You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth.Culture: Our culture is what makes UniFirst an organization that stands out from the rest.Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful.What you’ll be doing: Utilize hand/power tools, precision measurement tools, and electronic testing devices. Ensure safe operation of machinery, mechanical electrical, pneumatic, and hydraulic systems and components. Follow blueprints, schematics, operation manuals, manufacturer’s instructions, and engineering specifications. Troubleshoot sources of equipment problems through observation and use of precision measuring and testing instruments. Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required Perform daily and weekly safety checks on boilers and make necessary repairs as required. Record and analyze meter readings of utilities in long and take corrective actions when necessary. Perform daily and weekly location/system safety checks and follow up to address concerns.Inspect motor, belts, fluid levels, replace filters and perform other maintenance actions in accordance with maintenance procedures. Inspect, clean and lubricate shafts, bearings gears and other equipment parts in accordance with work procedures and technical manual. Utilize a Computerized Maintenance Management System.Perform other duties as assigned by leadership. QualificationsWhat we’re looking for:High school and/or GED is preferred.Two-year technical degree in an appropriate background is preferred. Must be at least 21 years of age.Valid driver’s license and a safe driving record are required. Knowledgeable in maintenance equipment.Minimum of 6 months’ work experience repairing industrial processing equipment in a production environment is required. Applicable military experience will be considered. Must pass UniFirst’s maintenance knowledge assessment test to be eligible for employment.Ability to read blueprints and schematics is required.Ability to read and understand maintenance literature printed in English is required. Basic computer and Microsoft Office skills is required. Lockout / Tagout experience is requiredAbility to work overtime as needed is required.Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. There’s a lot to love about UniFirst, where you come first. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Overview: IMMEDIATE INTERVIEWS & START DATES!EXTREMELY COMPETITIVE COMPENSATION!4-DAY WORK WEEK!Ira Subaru Manchester is part of fast growing Group 1 Automotive, a leader in automotive retail. We are growing and looking for Experienced Service Technicians/Mechanics, to work with our Quality Dealership, representing theQuality Subaru Product!We offer immediate interviews and start dates!We offer:A True Four Day Work ScheduleMarket Leading Pay, Based on Experience, Plus BonusesA Great Working Environment with the Latest EquipmentHealth, Dental & Vision InsuranceLife and Disability Insurance401(k) with company matchPaid Time-offEmployee Vehicle Purchase ProgramEmployee Stock Purchase PlanStructured, Self-paced and Paid Training Opportunities Leading to Manufacturer andGroup 1 RecognitionPinnacle Awards Program You needAutomotive Technician/Mechanic ExperienceA Love of Everything AutomotiveA Positive & Friendly AttitudeTools Based on your ExperienceCommunication SkillsBasic Computer SkillsStrong Desire to Provide an Exceptional Client ExperienceAbility to Achieve Targeted GoalsHigh School Diploma or EquivalentMust have a Valid Driver’s LicenseOur Service Technicians should be passionate about customer service, take pride in their work, an enjoy being part of a winning team that cares about their employees.Group 1 Automotive, a Fortune 250 company, is a leading operator of automotive dealerships and collision centers across the United States and United Kingdom.If you are in alignment with our values of integrity, transparency, professionalism, teamwork and respect - now might be the time for you to accelerate your career as part of the best company in automotive retail.To learn more about our company, visit www.group1auto.com. Apply today or refer a qualified friend.*All applicants must pass pre-employment testing to include: background checks, MVR, and drug testing in order to qualify for employment* Group 1 Automotive is an Equal Employment Opportunity employer.IND1

WHO WE AREAs the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute. Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.TOTAL REWARDSConstellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.Expected salary range of $98,400.00 - $147,600, varies based on experience, along with comprehensive benefits package that includes bonus and 401(k). PRIMARY PURPOSE OF POSITIONThis person will supervise an operations crew charged with responsibility for safely operating a liquefied natural gas (LNG) import and distribution terminal.PRIMARY DUTIES AND ACCOUNTABILITIESProvides leadership and guidance to liquefied natural gas (LNG) operations crew in a 12-hour daily rotational shift environment, including holidays, weekends, and nights.Understands and oversees the operation of natural gas vaporizers' loading of LNG trucks and monitoring and controlling the unloading of LNG ship.Operate and control natural gas process systems understanding the design and function of the various components which make up these systems and understanding and adhering to safety protocols.Accountable for the safety of the Everett LNG Facility and serves as a liaison between Operations, Maintenance, Marketing and other departments to convey critical information related to the safe and efficient operation of the facility.Supervises the work of members of his/her crew.Demonstrates and promotes values-based behaviors', build a highly motivated and highly functional team of Operators maintains the integrity of his/her crew through training, development, and performance management and support open and effective communication.Responsible for assigning work to his/her own crew. Responsibilities include prioritizing schedule conflicts ensuring adequate shift coverage during normal and abnormal conditions troubleshooting equipment problems and effectively transitioning work from one crew to the other.Acts responsibly and professionally at all times provides first line management decisions during abnormal/emergency situations and comfortable interfacing with all levels of the organization and with customers, State and local officials.In accordance with Federal regulations, this person will be subject to random drug and alcohol testing and must pass an annual physical examination. Regulations also mandate that this person will be trained and certified in basic first aid, CPR, and fire fighting skills.MINIMUM QUALIFICATIONSAssociates Degree in Engineering Technology, Electronics, or related field ORHS Diploma with minimum of 18 months of trade or technical training in related fieldAt least eight (8) years experience as a Technician in an appropriate area of plant operations, maintenance, fuels or I&CDemonstrated leadership skills to include attention to safety (personal and environmental schedules, equipment and its efficient use, and the use of employees to get the job doneEffective communication skills in all directionsAbility to plan and organize work through scheduling and making appropriate assignments to best utilize available talentMotivational skills that foster individual and team development and accomplishmentFull understanding and appreciation for procedures, policies, processes and practicesAbility to use the technology and equipment associated with both the Foreman Position and those positions assigned to the ForemanNo formal discipline within the last 24 monthsAbility to work in an environment that includes climbing, walking long distances, and standing for the majority of the timeAbility to lift a minimum of 50 pounds PREFERRED QUALIFICATIONSLNG Marine Terminal Experience

Are you a CNC Machinist looking to take your career to the next level KARL STORZ is seeking aSenior CNC Machinist/Programmerto join our dynamic team, specializing in the precision manufacturing of medical device components. In this role, you’ll leverage your programming and machining skills to produce high-quality parts that make a difference.Shift hours:3:30 p.m. - 12:00 a.m., Monday through FridayWhat you'll be doing:Set up and operate CNC lathes, mills, and Swiss-style machines to deliver flawless results.Create, edit, and optimize CNC programs under engineering direction.Troubleshoot machining challenges and ensure parts meet tight tolerances.Lead projects to improve processes through Lean manufacturing initiatives.Train and mentor junior machinists, sharing your expertise and driving team success.What you will need to be considered:5–10+ years of CNC programming and machining experience, including exotic metals like nitinol and stainless steel.Proven ability to read blueprints, inspect parts, and maintain GMP compliance.Advanced problem-solving skills for tooling, setup, and machine alignment.Experience with FDA QSR, ISO 13485, and ISO 9001 standards.A passion for precision, innovation, and collaboration.Why Join Us Be part of a cutting-edge team revolutionizing medical device manufacturing.Competitive compensation and benefits package.Opportunities for leadership, growth, and professional development.Who we are:KARL STORZ is an independent, family-owned company headquartered in Germany’s renowned MedTech manufacturing region. For 80 years, we've pioneered the most groundbreaking innovations in endoscopic surgery, video imaging, and OR integration to benefit patients and healthcare providers alike.With a 9000+ employees worldwide, we pride ourselves on harnessing cutting-edge technology, precise workmanship, and unrivaled customer support. In doing so, we help healthcare facilities manage costs, streamline operations, and deliver positive patient outcomes.It's not just about the tools we createit’s about the lives we change, together.Make an impact where precision meets purpose. APPLY NOW TO JOIN OUR TEAM!#LI-BL1

We want you to help us shape the future of shopping experiences and deliver on our purpose of connecting people with the products and experiences that enrich their lives. Joining SAS Retail Services, an Advantage Solutions company, means joining a network of 65,000 teammates serving 4,000+ brands and retail customers across 40+ countries. All the while, being provided the opportunities, support, and enrichment you need to grow your career.In this role, you will provide in-store merchandising support to Retailers to meet shoppers’ needs. This includes building displays and end caps, resetting shelves with product rotation, and tracking inventory to ensure that stores and suppliers maximize sales opportunities. Are you ready to shape the future of shopping and get it done with us What we offer:Competitive wages; $16.00 per hourGrowth opportunities abound – We promote from withinNo prior experience is required as we provide training and team support to help you succeedAdditional hours may be available upon requestWe offer benefits that can be customized to meet your family’s needs, including medical, dental, vision, life insurance, supplemental voluntary plans, wellness programs, and access to discounts through Associate PerksNow, about you:Are comfortable interacting with customers and management in a friendly, enthusiastic, and outgoing mannerYou’re 18 years or olderCan perform physical work of moving, bending, standing and can lift up to 50 lbs.Have reliable transportation to and from work locationDemonstrate excellent customer service and interpersonal skills with our clients, customers and team membersAre a motivated self-starter with a strong bias for action and resultsWork independently, but also possess successful team building skillsHave the ability to perform job duties with a safety-first mentality in a retail environmentIf this sounds like you, we can’t wait to learn more about you. Apply Now!

Overview: The Waterproofing division of Beacon Building Products is the largest distributor of high-demand sealants, waterproofing, concrete repair, and fire protection products.We stand out for our exceptional culture, long-tenured employees, and strong industry reputation.Our advantage We keep specialty, hard-to-find products in stock, so customers get what they need without waiting for special orders. As we expand nationwide, now is the perfect time to join our team and build your career in the growing waterproofing industry!Joining Beacon Building Products as an Outside Sales Representative means becoming part of a values-driven organization. Our core principles guide everything we do: putting people first, prioritizing safety, doing what's right, taking pride in our work, continuously improving, and making significant strides towards a more sustainable future. What you will earn:: Competitive Pay with Commission Plan: We make sure that your hard work is recognized. Medical, Dental, and Vision Benefits: Experience the peace of mind that comes with our comprehensive benefits package designed to prioritize your well-being. Employee Stock Purchase Plan (ESPP): Bolster your financial growth. Invest in your future and become a stakeholder by purchasing company shares at a 15% discount twice annually. 401(k) Match: Ensure a secure future with fair matching of your retirement contributions. Paid Leave: Recharge and find work-life balance, flexible parental leave for quality family time, generous sick leave, and enjoy paid time off, company holidays, and floating holidays to unwind and pursue personal interests.Car AllowancePaid Training and Advancement Opportunities: Open doors to exciting possibilities by engaging in our dynamic learning programs, which include the opportunity to earn valuable certifications. What you will do:: Sell exterior building products including roofing, siding, windows, and waterproofing materials across assigned territoryDrive profitable growth and achieve sales and margin budgetsProspect and identify new opportunities and customersDevelop and maintain relationships with customer base and vendorsPartner with branch operations to deliver an outstanding customer experienceUse customer relationship tools like SalesforceContinue to develop sales skills and expand product knowledgeTravel extensively within assigned market What you will bring:: Proven track record in a sales or related leadership roleExperience in waterproofing, building materials, or wholesale distribution is preferredSpanish bilingual proficiency a plusStrong technical sales abilitycomfortable working hands-on at job sites and presenting to professionals in office settingValid driver’s license and clean driving record requiredA desire to find creative solutions in a dynamic, changing environmentDrive to build and maintain positive relationshipsStrong analytical ability, communication and organization skills, and attention to detailHigh comfort level with technologyAbility to work both independently and in a team setting

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

As an EEO/Affirmative Action Employer, all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, or veteran status. Preferred Skills and Experience: In addition to leadership experience, hands on experience with industrial maintenance, including electrical, hydraulics, mechanical. Experience with PLCs (programmable logic controllers) is a plus. Proficient with Microsoft Word, Excel, Outlook. Schedule: 3rd Shift I. Job SummaryPlans, directs and controls the efforts of the Plant Maintenance Department to maintain and repair plant equipment and facilities commensurate with good engineering practices. II. Essential Duties and Responsibilities To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned. Manages the preventive maintenance program and maintenance of equipment and facilities.Develops, maintains and administers an organization qualified to maintain all equipment and facilities in a safe and efficient working condition. Executes an effective preventive maintenance program to minimize unscheduled down time.Maintains all operating equipment in satisfactory condition. Schedules needed repair to have minimum interference.Consults with other departments regarding desirable modifications of existing equipment and facilities and the possible replacement of existing equipment which will improve operations and reduce maintenance costs.May coordinates the efficient operation of facilities with project engineers.Coordinates and oversees the efficient maintenance of all plant transportation equipment.Analyzes cost studies equipment in the department designed to secure reduced operating costs. Makes recommendations thereon to the Plant Manager.Develops objectives and standards of performance for projects within the Maintenance Department required to meet departmental, divisional and corporate goals and objectives.Plans and provides for an adequate supply and ensures control over spare parts and maintenance supplies.Provides leadership and maintenance training to MRF Maintenance TechniciansEnsures Preventative inspections and Corrective repairs meet or exceed the company standards III. Supervisory ResponsibilitiesThe highest level of supervisory skills required in this job is the management of supervisory employees. This includes: Direct supervision of 5 full-time employees, including: Plant Maintenance Technicians / MechanicsIndirect supervision of 2 full-time employees, including Plant Maintenance Technicians / Mechanics from other shifts. IV. QualificationsThe requirements listed below are representative of the qualifications necessary to perform the job. A. Education and Experience Education: High School Diploma or G.E.D. (accredited)Experience: Four (4) years of relevant work experience (in addition to education requirement) B. Other Knowledge, Skills or Abilities Required Maintenance and repairs skills, and supervisory experience may be required.Must be willing to work as necessary (including weekends) to ensure the highest level of confidence of system operational availability BenefitsAt WM, each eligible employee receives a competitive total compensation package including Medical, Dental, Vision, Life Insurance and Short Term Disability. As well as a Stock Purchase Plan, Company match on 401K, and more! Our employees also receive Paid Vacation, Holidays, and Personal Days. Please note that benefits may vary by site. If this sounds like the opportunity that you have been looking for, please click “Apply.”

BluSky Restoration wants to hire YOU as a full-time Restoration Technician. This position has a starting pay of up to $35 an hour,depending on experience!Benefits Include:Medical, Dental, and Vision Insurance401K Plan with guaranteed matchPaid Time Off and HolidaysLife & Disability InsuranceEmployee Assistance ProgramsHealth and Wellness ProgramsBluSky apparelWhat does a Restoration Technician do They fix broken buildings!Whether it's a broken pipe or a major storm, when people have an emergency, they turn to us. That's where YOU come in - you'll respond to emergencies and restorethe lives of our customers.At BluSky, our core values are Excellence, Teamwork, Integrity, Innovation, Empathy, Passion, and, most of all, FUN!We are a culture of family.Previous experience and IIRC certifications are a plus but not required. We will help you obtain the training and development you need.Brief Description:The Restoration Technician is a first responder on property loss situations and helps mitigate damage in residential and commercial structures. Technicians are responsible for water damage mitigation, structural board-up and security, on-location cleaning, microbial remediation, content pack-outs, content processing/deodorization, content storage, and handling.Responsibilities:Water extraction and mitigationFire and smoke cleaning and restorationMicrobial remediationVandalism, crime scene, and biohazard clean-upDemolition (Demo Day!)Field management and supervision of all temporary labor personnelProvide the highest level of customer service with empathyAll other duties or projects as assignedQualifications:Possess and maintain a valid driver's licenseSuccessfully pass a national criminal background check and motor vehicle report background checkSuccessfully pass a pre-employment drug screeningAbility to be on-call 24 hours a day1 year of restoration industry or maintenance experience preferredWORK ENVIRONMENT AND PHYSICAL JOB DEMANDS:The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. The noise level in the work environment is usually quiet.The physical demands described here are representative of those that must be met by an employee to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.The employee must occasionally lift and/or move up to 25 pounds. While performing the duties of this job, the employee is regularly required to sit, use hands and fingers, reach with hands and arms, talk, and hear. The employee is required to move and walk around the office regularly.TRAVEL:Occasional travel. (Less than 25% of the time.) Some out-of-area and overnight travel may be expected for training or meetings.COMPENSATION:BluSky offers a competitive base pay between $25 - $35 per hour and a comprehensive benefits package that includes: a matching 401(k) plan, health insurance (medical, dental, and vision), paid time off, paid holidays, disability, equipment appropriate to the position (i.e., laptop, smartphone, etc.), and corporate apparel allowance.EEOC:BluSky is dedicated to the principles of equal employment opportunity. BluSky prohibits unlawful discrimination against applicants or employees on the basis of age 40 or over, race, sex, color, religion, national origin, disability, genetic information, sexual orientation, or any other applicable status protected by Federal, State, or local law.It is and will continue to be the policy of BluSky that all persons are entitled to equal employment opportunity based on their individual qualifications, performance, and potential without regard for any protected status, as required by state and federal law.

Cumberland Farms is a member of the EG America family of brands. EG America is one of the fastest-growing convenience store retailers in the United States, committed to becoming America’s #1 ‘one-stop’ destination. The business has an established pedigree of delivering excellent fuel, grocery and merchandise, and food service. Headquartered in Westborough, Massachusetts, our Company has grown to over 1,500+ locations across the United States employing over 18,000 team members. You can find us operating under the following store banners: Certified Oil, Cumberland Farms, Fastrac, Kwik Shop, Loaf N Jug, Minit Mart, Sprint Food Stores, Tom Thumb, Turkey Hill, and Quik Stop. Our headquarters in Westborough, MA is home to our Store Support Center, Company Warehouse, and Culinary Center.What We Offer:Competitive WagesWork today, get paid tomorrow through our earned wage access program*Paid Time OffMedical/Health/Dental Coverage401K with Company MatchTeam Member DiscountsTuition ReimbursementEmployee Assistance ProgramHealth Savings AccountCompany Spirit DaysEmployee recognition and awardsAnd much more!Position Summary:Performs repairs and maintenance to a variety of equipment including but not limited to: Gas Station Fueling Equipment and Underground Storage Tanks. Supervises repairs and maintenance on Dresser Wayne and Gilbarco Veeder-root fuel dispensers. Including all dispenser electronics, communications and hydraulic systems. Oversees work assignments for field service personnel who perform on-site services including installation, maintenance, and repair. Schedules Field Service Technicians. Oversees most day to day operations of team. Familiar with a variety of the field’s concepts, practices, and procedures. Relies on experience and judgment to plan and accomplish goals. Performs a variety of tasks. A wide degree of creativity and latitude is expected. Handles other duties as assigned.Responsibilities:Performs repair and maintenance services in the fieldProvides support and training for team members in the fieldOversees day to day service operations in a 24x7 environmentSchedules and assigns jobs and work areas to Field Technicians according to their skills, geography, etc to maximize tech efficiency, ensure geographic coverage, and meet established service levels.Manage after hours “on call” scheduleReviews work orders for completeness and accuracy to ensure accurate billingEnsures all department tools, equipment, and vehicles are in good working orderReview and approve payrollEmployee evaluationsWorking Relationships:Internal: Operations, Fleet, Payroll, HR, FSS Managers, Coordinators, and Dispatchers External: Equipment, Parts, Service vendors. Equipment manufacturers.Minimum Education:A high school diploma or its equivalent.Preferred Education:Associates degree or equivalent work experience. Demonstrated knowledge of critical fuel dispensing equipment and infrastructure. Management/Leadership training.Minimum Experience:Supervision of Field Technicians. 3+ years technical experience in the trade. Basic working knowledge with Microsoft Office products – Word, Excel, Outlook. Proficient with smart phone and/or tablet computers.Preferred Experience:3+ years experience supervising Field Service Technicians. Dispatching software system experience.Licenses/Certifications:Valid driver’s license.Soft Skills:Ability to write and speak effectively to individuals and groups.Other:Physical Travel Travel as needed – Regionally Daily, Nationally infrequently.Hours & Conditions:Ability to work extended hours and weekends as necessary. OtherAt EG America, it’s important that our employees reflect the world we live in and the communities we serve. We celebrate our differences, so your unique background and skillset could bring a wonderful new perspective to our team. If you have a passion for delivering exceptional results, thrive in a fast-paced corporate environment, and bring experience in business management or related areas, we'd love to meet you - even if you don't meet every single requirement.

We are seeking a licensed HVAC Technician to join our team!Under the direction of the facilities, repair and maintenance leader, the Licensed HVAC Tech III Inspects, maintains, repairs, modifies, improves, and operates central heating, ventilating, refrigeration and air conditioning systems to insure proper functioning at all times. This includes assisting on other projects including but not limited to, painting, tiling, and other maintenance related duties.Minimum Qualifications:1. High school diploma or equivalent.2. Current HVAC/Refrigeration License.3. Three (3) years of experience as an HVAC Technician.Hours: 40 hours per week, 1st shift 6:30am -3:00pmEvery other weekend and every other holiday shifts requiredWork Locations: Melrose Wakefield Hospital & Lawrence Memorial HospitalGuaranteed hours and base schedule! Duties Include:1. Performs installation, preventative and corrective maintenance on a variety of HVAC and refrigeration systems.2. Responds to, evaluates, and rectifies problems with HVAC equipment and systems, pneumatic and digital controls, refrigerators, freezers, ice machines, and other miscellaneous HVAC and refrigeration equipment3. Follows work orders, drawings, diagrams, other specifications and/or verbal instructions.4. Plan, install, inspect, test, and maintain/repair systems and/or equipment.5. Check completed work to ensure system/equipment is properly functioning.6. Develop and follow preventative maintenance schedule.7. Responds to repair calls, analyzes problems and makes recommendation for and/or repairs.Why Join Us Competitive salaries & benefitsMedical, Dental and Vision benefits start day one403(b) Retirement with company matchTuition ReimbursementOpportunities for career growthFree On Site Parking Tufts Medicine is a leading integrated health system bringing together the best of academic and community healthcare to deliver exceptional, connected and accessible care experiences to consumers across Massachusetts. Comprised of Tufts Medical Center, Lowell General Hospital, MelroseWakefield Hospital, Lawrence Memorial Hospital of Medford, Care at Home - an expansive home care network, and large integrated physician network. We are an equal opportunity employer and value diversity and inclusion at Tufts Medicine. Tufts Medicine does not discriminate on the basis of race, color, religion, sex, sexual orientation, age, disability, genetic information, veteran status, national origin, gender identity and/or expression, marital status or any other characteristic protected by federal, state or local law. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation by emailing us at .

Tufts Medicine is a leading integrated health system bringing together the best of academic and community health care to deliver exceptional, connected and accessible care experiences to consumers across Massachusetts. Comprised of Tufts Medical Center, Lowell General Hospital, Melrose/Wakefield Healthcare, an expansive home care network and a large clinically integrated physician network,Tufts Medicine has more than 15,000 dedicated employees and caregivers.Why Join Us Competitive salaries & benefitsMedical, Dental and Vision benefits start day one403(b) Retirement with company matchTuition ReimbursementOpportunities for career growthJob OverviewInspects, maintains, repairs, modifies, improves, and operates central heating, ventilating, refrigeration and air conditioning systems to insure proper functioning at all times.Location: Tufts Medicine TMC - 800 Washington Street - Boston, MAHours: Days shift - 40 hours - 6:45am - 3:15pmMinimum Qualifications1. High school diploma or equivalent.2. Current HVAC/Refrigeration License.3. Five (5) years of experience as an HVAC Technician.Duties and ResponsibilitiesThe duties and responsibilities listed below are intended to describe the general nature of work and are not intended to be an all-inclusive list. Other duties and responsibilities may be assigned.1. Performs installation, preventative and corrective maintenance on a variety of HVAC and refrigeration systems.2. Responds to, evaluates, and rectifies problems with HVAC equipment and systems, pneumatic and digital controls, refrigerators, freezers, ice machines, and other miscellaneous HVAC and refrigeration equipment3. Follows work orders, drawings, diagrams, other specifications and/or verbal instructions.4. Plan, install, inspect, test, and maintain/repair systems and/or equipment.5. Check completed work to ensure system/equipment is properly functioning.6. Develop and follow preventative maintenance schedule.7. Responds to repair calls, analyzes problems and makes recommendation for and/or repairs.8. Maintain necessary records and reports. Requisition necessary equipment and supplies. Move materials as necessary in the performance of duties or as directed. Detect and report improper operation, faulty equipment, defective materials and unusual conditions to proper supervision9. Maintain work area in a clean and orderly condition.10. Follow safety rules and regulations. Tufts Medicine is a leading integrated health system bringing together the best of academic and community healthcare to deliver exceptional, connected and accessible care experiences to consumers across Massachusetts. Comprised of Tufts Medical Center, Lowell General Hospital, MelroseWakefield Hospital, Lawrence Memorial Hospital of Medford, Care at Home - an expansive home care network, and large integrated physician network. We are an equal opportunity employer and value diversity and inclusion at Tufts Medicine. Tufts Medicine does not discriminate on the basis of race, color, religion, sex, sexual orientation, age, disability, genetic information, veteran status, national origin, gender identity and/or expression, marital status or any other characteristic protected by federal, state or local law. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation by emailing us at .

$22.00/hourUp to $5,000 Retention BonusShift Premium may ApplyImmediately hiring! We’re looking for responsible, detailed people who are ready to accelerate their automotive repair career! Whether you have worked in an auto garage or car dealership, this job is for you! Join our team of driven professionals at Avis Budget Group enterprise.What You’ll Do:As an automotive technician, you will be responsible for conducting essential repairs on a diverse range of vehicle brands and models, requiring minimal technical oversight. Your tasks will encompass various maintenance activities such as oil changes, lubrication, tire repairs, and potentially warranty repairs based on your proficiency level. In addition, you may support our skilled mechanics in handling intricate repair procedures.Perks You’ll Get:Bi-weekly hourly wage (New York and Puerto Rico: weekly wage)On-the-job training to expand your automotive abilities and help to obtain ASE CertificatesPaid time offMedical, dental and other insuranceFlexible spending account opportunity to contribute up to $270 as a tax-free benefit for public transportation or parking expensesRetirement benefits (401k)Employee discounts, including discounted car rental and discounted prices on the purchase of Avis/Budget cars* Above perks may vary based on full-time/part-time status and locationWhat We’re Looking For:Valid Driver’s License and good driving recordAt least 2 years of auto repair experience or coursework with automotive certifications1 ASE certification (ability to acquire 2 additional ASE certifications within first year)Knowledgeable in areas covered by the ASE certification programs, including, but not limited to, Engine Repair, Drive Train/Axles, Suspension/Steering, Brakes, Electrical, Heating/Air Conditioning, Engine Performance and Light Vehicle/DieselComfortable working in a mechanical shop with moderate or loud noise levelsMust have a complete set of tools required for auto repair and maintenanceBasic computer skills including typing, data entryMust be able to lift up to 50 pounds, continuously stand, bend, reach, walk, sit and kneel frequently, enter, exit and drive vehiclesMust be 18 years of age and legally authorized to work in the United StatesThis position requires regular, on-site presence and cannot be performed remotelyPrevious Original Equipment Manufacturer (OEM) experience preferred, providing an added advantage! Who We Are Here at Avis Budget Group, you will be joining a team of 25,000 driven people, performing with purpose. Together, we’re moving the future of transportation forward with our innovative, customer-focused solutions.Our culture is performance driven, where we encourage and support each other to be at our best through leadership, training, tools, and rewards.We are proud to make a positive difference to the lives of our colleagues, customers, and communities where we operate.Avis Budget Group is an Equal Opportunity Employer – Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other category protected by applicable law. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. The compensation and benefits information is accurate as of the date of this posting.The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. This position may be with any affiliate of Avis Budget Group. East BostonMassachusettsUnited States of America

Clean HarborsWeymouth, MA is looking for aLead Diesel Mechanicto join their safety conscious team!The Lead Diesel Mechanics are responsible for overseeing the day-to-day operations of the shop, which include supervising all maintenance work, assuring company fleet is within DOT compliance, as well as maintaining all service and parts records. Why work for Clean Harbors Health and Safety is our #1 priority and we live it 3-6-5!Competitive wages; Starting at $32/hrPay is based on experience$32-35 an hourOpportunity for increase after 90 days!!!Comprehensive health benefits coverage after 30 days of full-time employmentGroup 401K/RRSP with company matching componentOpportunities for growth and development for all the stages of your careerAccess to company paid OEM certifications and trainings!Generous paid time off!Company paid training!Tuition reimbursement!Company provided uniforms and PPE!State of the art facilities, technology, and tooling Speak with a recruiter today to learn more!! Key Responsibilities: Ensuring that Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and acting in a safe manner at all times;Performs preventative maintenance, conducts inspections, troubleshoots, diagnoses failures & deficiencies & performs necessary corrections. This includes conducting offsite road repairs/service calls.Completes daily checklist as required for proper operation of the unit being operated.Assures unit has daily maintenance duties performed and communicates any problems or issues with the unit immediately upon discoveryCompletes and submits all associated paperwork as required for tracking PM schedules.Conducts Safety Checks & Annual Vehicle Inspections in accordance with provincial & federal laws.Assures that Equipment is properly parked in compliance with facility permit and DOT requirements.Ensures that work meets all applicable Health and Safety Standard Operating Procedures.Responsible for maintaining a clean work environment.Performs other assignments as assigned by management.Understands Clean Compliance Standard. What does it take to work for Clean Harbors 5-7 years of diesel engine experienceAbility to work in team environment.Must be versed in all aspects e.g. electrical, computer, ECMs, fuel, air systems, ABS, hydraulic systems, engines etc.Demonstrates complete proficiency in diagnostic, repair, and maintenance of the following units: heavy duty forklift, roll off truck, forklifts, pick up trucks, box trucks, tractors, and tankers.Demonstrates complete proficiency in tooling and equipment diagnostic, repair, and maintenance.Ability to pass a background, drug, and physical test upon hire 40-years of sustainability in action.At Clean Harbors, our mission is to create a safer, cleaner environment through the treatment, recycling, and disposal of hazardous materials.Clean Harborsis the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Join our safety focused team today! To learn more about our company, and to apply online for this exciting opportunity, visit us athttps://careers.cleanharbors.com/. Clean Harbors is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or on the basis of any other federal, state/provincial or local protected class. Clean Harbors is a Military & Veteran friendly company. “2022 Top Company For Women To Work For in Transportation” *CH

Text henleyjobs to 23000 to start your application today!Are you looking to reach your full potential Do you enjoy meeting new people and working in a team environment Whether you are looking for a part-time job with flexible hours, or a full-time career with excellent advancement opportunities, Henley Enterprises, Inc, the largest franchisee of Valvoline Instant Oil Change, is proud to offer you the tools necessary to succeed.We welcome all types of talent – no matter your background or experience. Wherever your confidence level is, we’ll make sure you’re trained in the services we offer including changing oil, check/filling vehicle fluids or inspecting/replacing lights and wipers. Our team of trainers are equipped to lead you through the path of self-made success. That’s why we do not require any experience in our service centers! It doesn’t matter if you’re a recent high-school grad, a well-seasoned professional looking for a change, a veteran transitioning back into civilian life or somewhere in the middle.THE TOOLS WE’LL PROVIDE TO YOU Paid on-the-job trainingNo late evenings – Most locations close by 7pm Competitive pay set at $20.25 per hourNow offering DailyPay! Have the flexibility to get paid dailyPromoting from within – 95% of upper-level management started out in an entry-level positionTuition ReimbursementEmployee Discount – 50% off most services for up to 2 vehiclesPaid vacation and holidaysMedical, Dental, Vision, and 401(k) Savings plan*Terms and conditions apply and benefits may differ depending on locationResponsibilitiesProvide exceptional customer service and address any concerns or questions.Perform oil changes, filter replacements, and lubrication services for vehicles.Inspect vehicles for any potential issues or areas that require attention.Conduct basic maintenance tasks such as tire rotations and fluid level checks.Basic computer knowledge/aptitudeKeep track of inventory and ensure all supplies are readily available.Maintain a clean and organized work environment.Follow safety protocols and guidelines to ensure a safe working environment.RequirementsAttention to detail and ability to follow instructions.Excellent problem-solving skillsStrong customer service and communication skillsAbility to work in a fast-paced environment and handle multiple tasks.Able to learn and follow the VIOC SuperPro process for all services.Achieve SuperPro certification.Must have reliable transportation.Essential FunctionsInspecting and replacing car lights and wipers.Check fluid levels and add fluids to vehicle when necessary.Inspect/replace engine air filter and cabin air filter.Add oil to engine in the proper amount based on specifications of vehicle make/model.Able to remove/rotate/lift/reinstall tires for tire rotation service.Lubricate necessary components of the chassis/driveline.Perform additional services on cooling systems and transmissions.Perform second checks by visually verifying and performing proper callouts to ensure all necessary services have been performed correctly.Able to move from bay to bay to perform services on multiple vehicles.Frequently ascends/descends stairs/catwalks/stepstools to retrieve vehicle parts (filters, wipers, etc.) or perform services top side or underneath the vehicle (drain oil, replace filter, differential services, lubrication)Able to work for extended periods of time with arms above your head when performing services underneath the vehicle on a catwalk.Constantly positions self to perform required services under the hood, related to tires, or on catwalk working underneath the vehicle.Able to move/transport items up to approximately 50 pounds.Able to work with tools to perform duties in tight sometimes hard to reach areas.Communicate verbally and receive verbal communication to ensure services are performed accurately, safely and in the proper order.EnvironmentIn this position you will be subject to environmental conditions. Activities occur inside and outside and in varying temperature conditions.In this position you will be subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above ambient noise level.In this position you will be subject to hazards. Includes a variety of conditions including but not limited to proximity to moving mechanical parts, moving vehicles, electrical current, exposure to high heat, and exposure to chemicals.In this position you will be subject to atmospheric conditions. One or more of the following conditions that may affect the respiratory system or skin: fumes, odors, dust, mists, gases, restricted ventilation.In this position you will be required to function in narrow aisles or passageways such as catwalks.The above description is not intended to be an "all-inclusive" list of the duties and responsibilities of the job described, nor is it intended to be such a listing of the skills and abilities required to do the job. Rather, it is intended only to describe the general nature of the job.Henley Enterprises, Inc. and its affiliates are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.#AB1131#

Join our team of more than 34,000 team members, supporting our members and communities in our Club Support Center, 235+ clubs and eight distribution centers. BJ’s Wholesale Club offers a collaborative and inclusive environment where all team members can learn, grow and be their authentic selves. Together, we’re committed to providing outstanding service and convenience to our members, helping them save on the products and services they need for their families and homes. The Benefits of working at BJ’s• BJ’s pays weekly•Eligible for free BJ's Inner Circle and Supplemental membership(s)*• Generous time off programs to support busy lifestyles* o Vacation, Personal, Holiday, Sick, Bereavement Leave, Jury Duty• Benefit plans for your changing needs* o Three medical plans**, Health Savings Account (HSA), two dental plans, vision plan,flexible spending • 401(k) plan with company match (must be at least 18 years old)*eligibility requirements vary by position**medical plans vary by locationManage assigned projects to an on-time and on-budget completion to include new and takeover club locations; remodels and expansions; and new club gas facilities. This position is responsible for assisting and coordinating with real estate directors for the hiring of Consultant teams; representing the companies interests in public meetings and hearings; facilitating complete project approvals from State, Federal and local municipalities; the development of construction documentation that is in accordance with the company prototype, budget and schedule; on all assigned new club developments. Project involvement will range from Landlord reverse build-to-suits to full self-develop owned projects which may include surplus property for other retail uses. This position is to maintain a current schedule and budget update on all assigned projects and report same to real estate directors on an as needed basis.Utilize existing criteria for RFP's and solicit quotes for Consultant's scope of work with assistance from the real estate directors. Support real estate directors in developing conceptual site plans and establishing projectCoordinate efforts with the real estate directors of the project team through the conceptual design and due diligence phase of the project in order to establish the development feasibility, preliminary construction budgets and schedules. Support the Real Estate Directors negotiations by providing information/documentation necessary to complete the project. Assist and coordinate the development of approval and construction documents. Work with the project team to insure compliance with the project parameters, budget and schedule. Insure the accuracy and timeliness of document development. Attend working sessions and public hearings with state and local municipality staff to review projects and prepare for public hearings. Coordinate with the project team and insure that permits are issued; fees are filed; bonds are procured; and agencies are notified in advance of constructionSchedule and arrange project meetings with Consultants, Attorneys and BJ'sAdminister contract invoicing, amendments, change orders and close out documentation for allDevelop an entitlement timeline with the team to be incorporated into the overall project schedule. Coordinate the development of construction documents for the building, civil, off-site and gas in order to maintain the approved schedule for permitting and construction. Report the progress of project approvals in order to maintain an updated project schedule that management can rely on for scheduling club openings and events. Qualifications:Bachelor’s Degree in civil engineering required, 2 to 3 years’ experience in field. Retail Corporate or Civil Engineering Design firm experience a plus. General knowledge of land use planning/civil engineering principles and with Regulatory Agency/Municipal approval process. Familiarity with retail site design with understanding of soils, drainage, environmental and other related activities. Awareness of legal and environmental issues related to land. In accordance with the Pay Transparency requirements, the following represents a good faith estimate of the compensation range for this position. At BJ’s Wholesale Club, we carefully consider a wide range of non-discriminatory factors when determining salary. Actual salaries will vary depending on factors including but not limited to location, education, experience, and qualifications. The pay range for this position is starting from $80,000.00

REFRIGERATION TECH - 3rdSHIFT FULL TIME PERM ONSITE IN PORTSMOUTH, NH As theRefrigeration Technician, a typical day might include the following: You will operate, inspect and repair our ammonia refrigeration systems in a frozen food manufacturing environment in accordance with IIAR and ASHRAE standards while adhering to all state and local building codes and required safety regulations. Provide planned, scheduled maintenance of equipment including ammonia compressors, air compressors, boilers, electrical controls, pumps, fans and HAVAC equipment in order to minimize un-planned outages leading to costly repairs and lost production.Perform periodic inspections to locate and determine causes of malfunctionsAssisting with all Capital refrigeration projects to come in on time and under or at budget.Maintain test and inspect all plant fire prevention and emergency response systems and equipment.Assist with general building maintenance as required. Must Haves: Have a minimum of 3 years of HVAC and refrigeration experience, preferably with Ammonia based systems.You have a passion for all things maintenance, we are looking for a well rounded skill set so you must be able to deal with the administrative and technology side of the job in addition to the technical aspects of the job.You enjoy collaborating with a wide range of skill sets. In this role, you’ll deal with multiple personality types and a wide spectrum of skill sets.You have knowledge and understanding of both scheduling preventative maintenance and responding to issues that arise and the ability to prioritize and delegate appropriately.Must be legally authorized to work in the United States - relocation assistance is available

Overview: GovCIO is currently hiring for a Journeyman Unified Communications Deployment Engineer to provide telecommunications support to their local area, and travel around the US for unified communications deployment activities. This position is primarily located in Boston, MA and is an onsite position. Responsibilities: Performs a variety of electronic and technical assignments on data, telecom, and audiovisual communications equipment and systems. Completes endpoint troubleshooting using appropriate diagnostic equipment. Installs terminals, controllers, and test equipment and restores nonworking lines and/or equipment to working condition. Maintains liaison with outside vendors and orders circuits and/or equipment as required. Requires knowledge of specific hardware, test equipment, and terminal configuration. May develop recommendations for the combined usage of data processing and telephone system hardware and software.Conducts site surveys and meets contacts like clients, construction crew members, utility company personnel, and people from other departments within the Company.Installs, moves, commissions, and modifies audiovisual, telecommunications and related equipment according to job order specifications, standards, and procedures.Undertakes systems upgrades and answers queries related to system controls, and maintenance of the systems in general.Diagnoses equipment malfunctions. Maintains and repairs systems and equipment according to manufacturer recommendations and specifications.Reports and monitors service order changes.Be responsible for general local video operations and maintenance support as part of normal IT site support duties. This task does not include designing, engineering, specifying or acquiring video equipment. This support shall include basic troubleshooting of system problems and repairs, when they are identified by enterprise video support staff.Work with enterprise level voice and video engineers and technicians to conduct more detailed remote troubleshooting and repairs.Assist in setting up presentation devices and Video Conference units and provide basic troubleshooting support as needed. This includes ensuring functionality, being available for events, and shutting down video conferences.Perform local voice operations and maintenance support related to videoteleconferences. This support shall include basic troubleshooting of system problems and repairs whenthey are indicated by enterprise voice support staff. This task does not include designing, engineering,specifying or acquiring voice communications equipment.Provide on-call support by identifying, researching, and resolving technical problems received via the ServiceNow ticketing system.Interact with network services, software systems engineering, and/or applications development to restore service and/or identify and correct core problems. Perform routine system maintenance and analysis functions, including hardware configurations and adding, removing and replacing equipment components.Below is a non-comprehensive list of technologies that the technician may encounter. The ideal candidate will understand the purpose of these technologies and have some experience with them, or with equivalent technologies:Cisco IP audio and video endpoints, Unified Call Manager (CUCM), Expressway Meeting Server (CMS), Meeting Management (CMM), Telepresence Management Suite (TMS), Prime, and Identify Services Engine.Broadsoft CloudMicrosoft System Center Configuration Manager (SCCM)Avaya technologies including audio/video components, Communicator, One-X, Application Enablement Server (AES), and the following at version 6.0 or above: Communications Manager, Session/System Manager, and Aura Messaging.Polycom DMA, Real Presence, and endpointsSolarwindsSplunk (syslog)CyberArkICAM / Single Sign On methodologies (SSO) / CertificatesInfoBlox / AkamaiSIP routing, dial pattern and number translations, E.164 routing, PRI as well as standards-based codecs, to include codecs from Cisco and PolycomVideo Conferencing Services (VCS) infrastructureUnified Communications and Video conferencing, including but not limited to: Cisco Unified Communications Manager, Unity Connection, TEAMS, UCCX, Expressways, Jabber Client, SIP, H.323, and QoSSession Border Controllers (SBC), Cisco Unified Border Elements (CUBEs) Qualifications: High School with 0-3 years (or commensurate experience)Clearance Required: Must be able to obtain and hold a Public Trust ClearanceRequired Skills and ExperienceUSCitizenHigh degree of technical proficiencyExcellent problem-solving skills and analytical abilitiesMust be prepared for regional travel up to 25% at customer locations.#NSS#NEON#DL Company Overview: GovCIO is a team of transformers--people who are passionate about transforming government IT. Every day, we make a positive impact by delivering innovative IT services and solutions that improve how government agencies operate and serve our citizens.But we can't do it alone. We need great people to help us do great things - for our customers, our culture, and our ability to attract other great people. We are changing the face of government IT and building a workforce that fuels this mission. Are you ready to be a transformer We are an Equal Opportunity Employer.All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, gender identity or expression, sexual orientation, national origin, disability, or status as a protected veteran. EOE, including disability/vets. Posted Pay RangeThe posted pay range, if referenced, reflects the range expected for this position at the commencement of employment, however, base pay offered may vary depending on multiple individualized factors, including market location, job-related knowledge, skills, education, experience, and internal equity. The total compensation package for this position may also include other compensation elements, to be discussed during the hiring process. If hired, employee will be in an “at-will position” and the GovCIO reserves the right to modify base salary (as well as any other discretionary payment or compensation program) at any time, including for reasons related to individual performance, GovCIO or individual department/team performance, and market factors. Posted Salary Range: USD $70,000.00 - USD $70,000.00 /Yr.

Overview: Part Time Orthodontic Assistant Cortland Dental and Braces - Brockton and New Bedford, MA Part Time: Tuesday - Thursday 8:45am - 5:00pm Radiology certification required Travel - 1 day in New Bedford and 2 days Brockton (Mileage reimbursed) Ortho experience required Competitive Pay Work for a company that is truly making the world a happier place, one smile at a time! At Benevis, we create over a million smiles a year in the communities we serve and believe that every person deserves access to quality, affordable dental care. This mission drives everything we do. With over 3000 employees in offices across the country from clinical to support staff - we are united in our mission to create happy, healthy smiles through providing high quality dental care in a fun, compassionate environment. Are you ready to join us in creating our next million smiles We have JUST the opportunity for you.We are actively seeking an Orthodontic Assistant to join our team. Support our mission to providing excellent dental care in the community and help us create more smiles and memorable experiences. Join a team that believes in teamwork and truly cares about their patients. Find your opportunity to make an impact: Get out into your community -- participate in local events including school screenings, presentations and any opportunity to promote a positive image of us Participate in morning huddles (hey, even ask to run one!), let your peers know how much you appreciate them, highlight great examples of customer focus, collaboration etc. Love working with kids (they make up 70% or more of our patient base) Responsibilities: Deliver quality and compassionate care to every patient Guide parents and patients through our processes before treatment Educate patients in oral hygiene instruction and provide postoperative instruction Prepare patient for examination and treatment Take x-rays and save to patient charts Take quality orthodontic facial photos Responsible for the operational readiness Prepare tray set-ups for dental procedures Mix amalgam, cement, pulp paste and prepare impression materials Sterilize and disinfect instruments and equipment Clean chairs and rooms Assist professional dental staff with treatment Document patient information, treatment plans, and procedures in patient chart Pour, trim and polish impression casts Fabricate custom impression trays Perform to the highest integrity by adhering to all government regulations, company standards, and company compliance programs Other duties as assigned Qualifications: Orthodontic or Dental Assistant Certification (State dependent) CPR/BLS certification required Preferred at least 1 year of experience in Orthodontic Assisting Willing to travel in territory assigned to team High focus on customer service and satisfaction Must love working with children Compassion and high level of service for our patients, parents and staff Integrity, always doing the right thing Dependable, reliable to be at work when scheduled Attention to detail Able to organize work, engage in a variety of tasks simultaneously and consistently meet deadlines Professional manner and appearance at all times We Offer: Competitive compensation Bonuses based on Office performance We value teamwork, mutual respect and cooperation. We do not practice unlawful discrimination, including harassment or tolerate it in our workplace. What do we mean by discrimination We mean that we do not discriminate on the basis of race, color, creed, religion, sex, national origin, age, citizenship, disability, sexual orientation or any other characteristic protected by federal, state, or local law.

Come to work and be ready to think on your feet, grow your skills, and embrace the many opportunities. Our Distribution Centers are the key to getting new products out to TJ Maxx, Marshalls, HomeGoods, Sierra, Winners, Homesense, and TK Maxx. To keep up with our ever-changing inventory, we stay nimble and adaptable. No day is the same, and that’s just how we like it. Every shift is a new opportunity to Discover Different - and support each other along the way.Location: 135 Goddard Memorial Dr. Worcester, MA 01603MAINTENANCE MECHANICWork ScheduleIn Person: Monday-Friday 4:30 PM - 12:45 AM (Temporary Role)Who you are working for Come Discover Different at TJX, we think you’ll find that it’s so much more than a job.At the TJX Companies, Inc., you'll not only enjoy the security of working for a stable and profitable industry leader, but you'll also enjoy the amazing company culture, and that’s just the beginning.Our Distribution Centers are the key to getting new products to our stores, we move a lot of inventory at all times of the day and that takes working, learning, and growing together. When you’re a part of our TJX family, you have the full support of a diverse, close-knit team in our Distribution Centers.What’s In It for You Competitive wagesCulture that prioritizes health & safetyClean and climate-controlled workspacePaid vacation and sick timeBenefits including medical, dental, and vision insurance, 401k and 401k match, Associate discountUnion EnvironmentWhat you’ll be doing:The Skilled Tech Mechanic assists in the installation, maintenance, repair, and fabrication of DC equipment and facilities under the direct supervision of the Maintenance Supervisor. Recommend solutions for problems and poses the ability to work independently on routine problems/minor repairs. Be on call for emergencies while working, ability to handle multiple projects and daily activities, and meet timelines.Job responsibilities include:Must be able to use hand and power tools and other equipment as necessary to complete assignments including building maintenance, electrical wiring, conveyor repairs, packaging equipment, and hydraulics. Proficiently operate various power industrial trucks safely and efficiently.Possess and demonstrate carpentry skills to include fabrication projects of various materials.Recommends and implements improvements to equipment, operations and procedures and safety as appropriate.Supports maintenance manager, supervisor, and clerk to spec out and orders parts, and help maintain inventory of spares.Facilities testing according to preventative maintenance schedule and report findings and make repairs to keep all building and material handling systems operational.Requirements:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and /or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.Requirements Continued:Experience in industrial maintenance field with demonstrated preventative maintenance experience in material handling systems.Proven proficiency in three or more of the following areas; electrical/electronics, welding/fabrication, plumbing, electro hydraulics, mechanical and electrical drive systems, PLC controlled systems.Familiarity with OSHA/NFPA/NEC standardsUnderstand and knowledgeable of MSDS sheets.Ability to grasp, bend, and lift or otherwise move items weighing up to 75 pounds.Ability to speak and write in EnglishGood communications and writing skills.Proficient in Mechanics Math (included but not limited to fractions & formulas)Capable of completing all company forms and paperworkAbility to work at heights or unusual work positions.Must be able to work from written and oral instructions. Trained in reading mechanical and/or electrical schematic drawings, sketches, manuals, and specifications.Must be able to operate all shop equipment and hand tools. Operate various types of welding equipment.Must maintain housekeeping standardsMust maintain OSHA Power Equipment CertificationMust maintain safe work practices.Come Discover Different at TJX - we think you’ll find that it’s so much more than a job. We move a lot of inventory - at all times of the day - and that takes working, learning, and growing together. When you’re a part of our TJX family, you have the full support of a diverse, close-knit team in our Distribution Centers.Pay range for this role is: $20.00 - $24.50As you think about where to work, know that we take care of our people. We offer competitive pay and great benefits. We consider all applicants for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, gender identity and expression, marital or military status. We also provide reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disabilities Act and applicable state and local law.

Style is never in short supply at our more than 1,000 TJ Maxx stores. They all have different products, but the same commitment to the thrill of the find. From designers straight off the runway to statement jewelry, we offer exciting surprises that make the everyday a little more fun. Same with working here. Our environment is ever-changing, yet always encouraging. Each shift is a new opportunity to Discover Different.Facilities SupervisorLocation:TJ Maxx Distribution Center Worcester - 135 Goddard Memorial Dr. Worcester MA 01603Shift: C Shift (Monday - Thursday, 4:30 PM - 3:00 AM) In PersonJob Summary:Supervise facilities staff. Responsible for the upkeep and repair of the equipment, building and grounds. Responsibilities specifically include: the electrical, HVAC, conveyor, powered industrial equipment, life safety equipment. Coordinates with local contractors and vendors.Major Areas of Responsibility • Oversees all work and demonstrates SME (Subject Matter Expert) levels of knowledge on all MHE (Material Handling Equipment) in the building• Ensure inventory levels are maintained through CMMS.• Verifies all work orders are complete and preforms verification of each members work.• Supervise maintenance staff. Develops, counsels, trains, motivates, and resolves associate relations issues and conducts performance appraisals and monitors performance of facilities associates.• Coordinates daily maintenance, troubleshooting, and preventative maintenance of equipment.• Maintains efficiency and safety of all equipment. Monitors the daily operation and directs action as required.• Manage projects within the building as needed.• Coordinates with the operational leaders to establish priorities and schedules the workload to satisfy production needs.• Coordinates with local contractors and vendors for equipment and services as required and ensures contract compliance.• Obtains services for repairs and maintenance of the facility’s equipment.• Completes reports and records as needed• Ensure all vendor work is completed before signing off on work.• Understand and drives budget requirements.Minimum formal education, if any, required to perform this job.• High School Degree or equivalent plus 3 - 5 years of conveyor systems and powered equipment experience.Minimum job skills required to perform this job (for example: programming languages, strong interpersonal skills, computer software packages).• Strong knowledge of building codes, trade standards and general practices within the maintenance field.• Strong knowledge of electricity, mechanical, construction, plumbing and HVAC.• Strong communication, organizational, and negotiation skills.• Must be able to lift, push and pull up to 50 lbs.Minimum experience required to perform this job.• Proven ability to supervise and influence others on the team.• Proven ability to multi-task and prioritize many different projects and workload.• Experience of multi-contractor management.• 4-6 years in the maintenance field with experience in supervising mechanics preferred.• Two years supervisory experience.Pay Range for this role is $61,000.00 - $78,100.00At TJ Maxx there’s so much potential to discover something new. A new day means new merchandise, and a fresh chance to reinvent retail. Discover Different means that we want you to bring your whole self and your sense of style to work with you every day - just as Associates do throughout the entire TJX family, which includes Marshalls, HomeGoods, Sierra, and Homesense.Discover Different also means we embrace each other’s differences and unique perspectives. We consider all applicants for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, gender identity and expression, marital or military status. We also provide reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disabilities Act and applicable state and local law.

Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Custodian to join our UniFirst community. As a Team Partner in the Maintenance Department, you will be performing housekeeping and cleaning activities of the facility in office spaces, kitchen areas, common areas, plant / production floor, restroom facilities, and parking lots / grounds areas. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime. We have an immediate opening and provide on the job training. Pay & Benefits: On the job training & great hourly pay + 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Direct Payroll Deposit, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. What’s in it for you Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth. Culture: Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds. We believe our diversity makes us who we are, and we strive every day to build a culture where everyone feels welcome. What you’ll be doing: Utilize equipment to perform housekeeping operations, including wet and dry mops, brooms, floor scrubbers, vacuum cleaners, cleaning supplies, towels, steel wool, carts, and trash cans.Ensure restrooms, kitchen, and breakroom areas are cleaned and stocked.Remove trash and place it in the designated area.Maintain window cleanliness.Uphold furniture by dusting and ensure builders hardware is satisfactory.Relocate light furniture to assigned areas as directed.Replace light bulbs in overhead fixtures when directed.Perform cleaning operations in the office areas, production floor, outside of the facility, and other property areas as assigned by the Maintenance Supervisor.Perform other duties as assigned by leadership QualificationsWhat we’re looking for:Must be at least 16 years of age or olderMust be 18 years of age or older to work in heights and electricityHigh school education and/or GED equivalent is preferred.Knowledge of cleaning materials and equipment to ensure safe usage of general cleaning chemicals.Ability to work independently with little or no supervision.Must be able to operate floor cleaning equipment and other tools as required.Ability to read, comprehend and interpret procedures and instructions in English.Ability to effectively present information and respond to questions from co-workers and managers.Ability to work overtime as needed is required.Ability to lift up to 80 lbs.About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 2 billion-dollar organization.UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team.UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws.

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Overview: MARKET LEADING PAY, PLUS BONUSESIra Ford Auburnis part of the fast growing Group 1 Automotive, a leader in automotive retail and service.We are growing and looking for ExperiencedAutomotive Service Technicians/Mechanics to work with our Quality Dealership representing a Quality Product.We offer:Market Leading Pay, Based on Experience, Plus BonusesA Great Working Environment with the Latest EquipmentStructured, Self-paced and Paid Training Opportunities Leading to Manufacturer and Group 1 RecognitionHealth, Dental & Vision Insurance Life and Disability Insurance401(k) with company matchPaid Time-offEmployee Vehicle Purchase ProgramEmployee Stock Purchase PlanPinnacle Awards ProgramYou needAutomotive Technician/Mechanic ExperienceA Love of Everything AutomotiveA Positive & Friendly AttitudeTools Based on your ExperienceCommunication SkillsBasic Computer SkillsStrong Desire to Provide an Exceptional Client ExperienceAbility to Achieve Targeted GoalsHigh School Diploma or EquivalentMust have a Valid Driver’s License*All applicants must pass pre-employment testing to include: background checks, MVR, and drug testing in order to qualify for employment*Group 1 Automotive, a Fortune 250 company, is a leading operator of automotive dealerships and collision centers across the United States and United Kingdom.If you are in alignment with our values of integrity, transparency, professionalism, teamwork and respect - now might be the time for you to accelerate your career as part of the best company in automotive retail.To learn more about our company, visit www.group1auto.com. Apply today or refer a qualified friend.Group 1 Automotive is an Equal Employment Opportunity employer.IND1

If you are a skilled CNC Machinist with a passion for precision and continuous improvement, we encourage you to apply and join the innovative team at KARL STORZ U.S.!Shift Hours:6:00 a.m. - 2:30 p.m., Monday through FridayWhat you'll be doing:Set up and operate CNC machines (lathe, mill, Swiss-style) and ensure accuracy to blueprint specifications.Edit CNC programs and troubleshoot any issues during setup or operation.Inspect and measure parts to ensure conformance to print and record relevant data.Perform basic Total Productive Maintenance (TPM) to keep machines in good working order.Work with exotic metals such as nitinol, stainless steel, and nickel alloys, ensuring high-quality production.Participate in Lean manufacturing and process improvement activities.Collaborate with engineers, quality teams, and management to meet production schedules and quality standards.What you'll need to be considered:High school diploma or general equivalency (GED)3-5+ years of CNC machining experience.Proven ability to read blueprints and inspect parts according to specified tolerances.Experience with exotic metals and machining medical device components is preferred.Ability to edit CNC programs and troubleshoot machine issues.Basic to intermediate computer skills for program edits and record-keeping.Strong attention to detail and commitment to maintaining quality and safety standards..Must be able to lift up to 50 lbs and stand for extended periods.Must adhere to FDA Quality System Regulations (QSR), ISO 13485, and ISO 9001 standards.Willingness to learn and grow in a dynamic manufacturing environmentAbility to work effectively with engineers, management, and coworkers.Strong problem-solving skills and the ability to make decisions regarding machining processes.Excellent interpersonal communication skills and the ability to maintain organized records.Who we are:KARL STORZ is an independent, family-owned company headquartered in Germany’s renowned MedTech manufacturing region. For 80 years, we've pioneered the most groundbreaking innovations in endoscopic surgery, video imaging, and OR integration to benefit patients and healthcare providers alike.With a 9000+ employees worldwide, we pride ourselves on harnessing cutting-edge technology, precise workmanship, and unrivaled customer support. In doing so, we help healthcare facilities manage costs, streamline operations, and deliver positive patient outcomes.Ready to make an impact Apply today and help us shape the future of medical technology atKARL STORZ.#LI-BL1

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

Text henleyjobs to 23000 to start your application today!Are you looking to reach your full potential Do you enjoy meeting new people and working in a team environment Whether you are looking for a part-time job with flexible hours, or a full-time career with excellent advancement opportunities, Henley Enterprises, Inc, the largest franchisee of Valvoline Instant Oil Change, is proud to offer you the tools necessary to succeed.We welcome all types of talent – no matter your background or experience. Wherever your confidence level is, we’ll make sure you’re trained in the services we offer including changing oil, check/filling vehicle fluids or inspecting/replacing lights and wipers. Our team of trainers are equipped to lead you through the path of self-made success. That’s why we do not require any experience in our service centers! It doesn’t matter if you’re a recent high-school grad, a well-seasoned professional looking for a change, a veteran transitioning back into civilian life or somewhere in the middle.THE TOOLS WE’LL PROVIDE TO YOU Paid on-the-job trainingNo late evenings – Most locations close by 7pm Competitive pay set at $20.25 per hourNow offering DailyPay! Have the flexibility to get paid dailyPromoting from within – 95% of upper-level management started out in an entry-level positionTuition ReimbursementEmployee Discount – 50% off most services for up to 2 vehiclesPaid vacation and holidaysMedical, Dental, Vision, and 401(k) Savings plan*Terms and conditions apply and benefits may differ depending on locationResponsibilitiesProvide exceptional customer service and address any concerns or questions.Perform oil changes, filter replacements, and lubrication services for vehicles.Inspect vehicles for any potential issues or areas that require attention.Conduct basic maintenance tasks such as tire rotations and fluid level checks.Basic computer knowledge/aptitudeKeep track of inventory and ensure all supplies are readily available.Maintain a clean and organized work environment.Follow safety protocols and guidelines to ensure a safe working environment.RequirementsAttention to detail and ability to follow instructions.Excellent problem-solving skillsStrong customer service and communication skillsAbility to work in a fast-paced environment and handle multiple tasks.Able to learn and follow the VIOC SuperPro process for all services.Achieve SuperPro certification.Must have reliable transportation.Essential FunctionsInspecting and replacing car lights and wipers.Check fluid levels and add fluids to vehicle when necessary.Inspect/replace engine air filter and cabin air filter.Add oil to engine in the proper amount based on specifications of vehicle make/model.Able to remove/rotate/lift/reinstall tires for tire rotation service.Lubricate necessary components of the chassis/driveline.Perform additional services on cooling systems and transmissions.Perform second checks by visually verifying and performing proper callouts to ensure all necessary services have been performed correctly.Able to move from bay to bay to perform services on multiple vehicles.Frequently ascends/descends stairs/catwalks/stepstools to retrieve vehicle parts (filters, wipers, etc.) or perform services top side or underneath the vehicle (drain oil, replace filter, differential services, lubrication)Able to work for extended periods of time with arms above your head when performing services underneath the vehicle on a catwalk.Constantly positions self to perform required services under the hood, related to tires, or on catwalk working underneath the vehicle.Able to move/transport items up to approximately 50 pounds.Able to work with tools to perform duties in tight sometimes hard to reach areas.Communicate verbally and receive verbal communication to ensure services are performed accurately, safely and in the proper order.EnvironmentIn this position you will be subject to environmental conditions. Activities occur inside and outside and in varying temperature conditions.In this position you will be subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above ambient noise level.In this position you will be subject to hazards. Includes a variety of conditions including but not limited to proximity to moving mechanical parts, moving vehicles, electrical current, exposure to high heat, and exposure to chemicals.In this position you will be subject to atmospheric conditions. One or more of the following conditions that may affect the respiratory system or skin: fumes, odors, dust, mists, gases, restricted ventilation.In this position you will be required to function in narrow aisles or passageways such as catwalks.The above description is not intended to be an "all-inclusive" list of the duties and responsibilities of the job described, nor is it intended to be such a listing of the skills and abilities required to do the job. Rather, it is intended only to describe the general nature of the job.Henley Enterprises, Inc. and its affiliates are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.#AB1131#

Join our team of more than 34,000 team members, supporting our members and communities in our Club Support Center, 235+ clubs and eight distribution centers. BJ’s Wholesale Club offers a collaborative and inclusive environment where all team members can learn, grow and be their authentic selves. Together, we’re committed to providing outstanding service and convenience to our members, helping them save on the products and services they need for their families and homes. The Benefits of working at BJ’s• BJ’s pays weekly•Eligible for free BJ's Inner Circle and Supplemental membership(s)*• Generous time off programs to support busy lifestyles* o Vacation, Personal, Holiday, Sick, Bereavement Leave, Jury Duty• Benefit plans for your changing needs* o Three medical plans**, Health Savings Account (HSA), two dental plans, vision plan,flexible spending • 401(k) plan with company match (must be at least 18 years old)*eligibility requirements vary by position**medical plans vary by locationJob SummaryReceives, rotates, wraps, and merchandises fresh and processed meats. Assists in merchandising seafood, rotisserie chickens, prepared foods, and cheeses. Provides assistance to Members by answering questions and recommending products.Maintains all cleaning and safety standards within the meat department. Team Members:Carry out job functions and responsibilities as assigned. Support the application of club policies, procedures and compliance. We strive for flawless execution and hold ourselves accountable .Acts with honesty and integrity and lead with the member in mind to address any and all concerns and to escalate any concerns, as appropriate.Ensure a safe and positive environment for our members and each other.Embrace inclusion and diversity, by working together with collaboration and respect. Work as a team to achieve goals. Move with speed and agility in everything we do. Innovate and adapt so we can move as fast as the world around us. Maintain a friendly and positive attitude. Members:Deliver service excellence through all points of contact.Resolve and deescalate to address every member concern. Ensure a safe and positive environment and experience for the members. Daily commitment to GOLD Member StandardsGreet, Anticipate, Appreciate (GAA)Fast, Friendly Full, Fresh, CleanClub Standards: Work as a team to deliver GOLD club standards daily. Work with commitment and pride to deliver GOLD- Grand opening look dailyAll items stocked and promotional plans executedMaintain visible accurate signageClean and organized, inside and outKnow your Business:Understand how to access and read production and/or financial performance reporting for your departmentSee the connection between consistent execution and the positive impact it can have on the businessMajor Tasks, Responsibilities, and Key AccountabilitiesProvides assistance to Members by answering questions regarding meats, poultry, and seafood. Makes recommendations on food products when necessary. Weighs, packages, wraps, and labels cuts of meat, poultry, and seafood, including grinds. Assists the meat cutter in packaging freshly cut meats and seafood. May grind hamburger meat. Inspects and stores meat upon delivery. Ensures that all delivered meat meets or exceeds company quality standards. Ensures the meat, seafood, prepared foods, and cheese cases are fully stocked. Rotates meats, poultry, seafood, prepared foods, and cheeses according to expiration dates. Follows established guidelines when disposing of damaged and/or expired products. Receives and unpacks meat, poultry, seafood, prepared foods, and cheeses in the meat cooler and freezer. Cleans and sanitizes all equipment, display fixtures, and areas in the meat department, including the meat cooler, freezer, and refrigerated display cases. Maintains all club policies and procedures. Performs other duties as assigned, including working in other departments as needed. Regular, predictable, full attendance is an essential function of this job. QualificationsPrevious experience working with fresh and processed meats preferred. Knowledge of automatic/hand wrapping machines preferred. Prior experience working in a meat and/or deli department preferred. At least 18 years of age. Environmental Job ConditionsMost of the time is spent moving about frequently on hard surfaces. There may be a need to occasionally position oneself to examine or scan merchandise, including bending, handling, pulling, reaching, and/or stooping. Frequently requires lifting objects up to 30 pounds. May require lifting and moving heavy and/or awkward objects more than 30 pounds with assistance. Located in a comfortable indoor area with infrequent exposure to temperature extremes and loud noises. There may be occasional exposure to cleaning agents. In accordance with the Pay Transparency requirements, the following represents a good faith estimate of the compensation range for this position. At BJ’s Wholesale Club, we carefully consider a wide range of non-discriminatory factors when determining salary. Actual salaries will vary depending on factors including but not limited to location, education, experience, and qualifications. The pay range for this position is starting from $16.25.

TheCustoms Compliance Specialistis responsible for providing governance of all imports and exports for all Clean Harbors divisions, as well as assisting with cross-border moves of equipment, vehicles, specialty items, tools, electronics, waste, chemicals and/or product.Why work for Clean Harbors Health and Safety is our #1 priority, and we live it 3-6-5!Competitive wagesComprehensive health benefits coverage after 30 days of full-time employmentGroup 401K with company matching componentGenerous paid time off, company paid training and tuition reimbursementPositive and safe work environmentsOpportunities for growth and development for all the stages of your careerEnsures Health and Safety is the number one goal by following policies, processes, and acting in a safe manner at all timesWork with the in-house legal team to investigate and resolve current and potential customs issues.Assist/Administrator cross-border moves of equipment, vehicles, specialty items, tools, electronics, waste, chemicals, and/or product.Develop, implement, and maintain company-wide cross-border SOPs, incorporating changes in international regulations and company needs.Create company-wide standard documents/forms to ensure that all cross-border moves comply with all government regulations. Confirm follow-up paperwork is submitted in a timelymanner.Research, develop, and manage all customs/broker vendor relationships.Work in close collaboration with internal departments to ensure strict compliance adherence in all countrieswhere Clean Harbors doesbusiness.Gains high level understanding of all systems and routing software.Examine Free Trade Agreements and work in collaboration with business leaders to ensure FTA utilization and compliance where available Able to communicate rates and schedules in timely fashion to requestor.Maintain awareness and knowledge of current customs policies and regulations.Identify cost saving measures in relation to tariffs, taxes, and duties.Performs other duties and tasks to meet Clean Harbors’ business needs.Bachelor’s in International Business or Logistics preferred but not required;Experience with route planning and order management preferred but not requiredAdaptability in a complex operations environmentAbility to work independently and identify where assistance may be neededExperience working in Government sites/custom broker databases: CBP, CBSA, and FMCSA.Efficient time management skillsStrong problem-solving skillsAbility to read and interpret customs, compliance regulations and verbiageOutstanding influencing (business leaders), interpersonal, and communication (written/verbal) skills. Must be able to influence processes with LeadershipProficient in Microsoft Office Suite software (Excel, Outlook, PowerPoint)Verifiableexperienceresponsibleformanagingtheimportandexportofvehicles,equipmentand commercialgoodsDetailed oriented and achievement drivenCommitted and dependableClean Harbors is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or on the basis of any other federal, state/provincial or local protected class.Clean Harbors is a Military & Veteran friendly company.*CH

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

Our Production Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Production Team Partner to join our UniFirst Family. As a Team Partner in the Pre-Tunnel Inspection Department, you will be working on a team to help ensure quality assurance for our customers by inspecting garments as you process them through our steam tunnel. At UniFirst we have a 5-day work week, enjoy Saturday and Sunday off!! We have an immediate opening and provide on the job training. Pay & Benefits: On the job training & great hourly pay + 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Direct Payroll Deposit, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. What’s in it for you Training: Our Team Partners receive ongoing cross-training, exposing them to different areas of production. Cross training enhances their performance and assists them with their career potential and advancement. Work Life Balance: We offer a 40-hour work week. Enjoy weekends off! Career Growth: Some companies like to promote from within, we love to! Many of our managers started at UniFirst working on the production floor! Culture: Our family culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds. We believe our diversity makes us who we are, and we strive every day to build a culture where everyone feels welcome. What you’ll be doing: Count garmentsHang garments to be processed through the steam tunnelVisually inspect all garments for tears, holes, stains, and damageEnsure all garments pass the UniFirst 20-point uniform inspection processFollow all safety policies, HACCP and medical guidelines. *Perform other duties as described by area supervisor or management QualificationsWhat we’re looking for: High school education and/or GED equivalent preferredMust be at least 18 years of age or older.Ability to stand for 8-hour shiftAbility to read, write, and communicate clearly with managementAbility to perform basic mathematical functions using American standard units in weight, measurement, volume, and distanceAbility to lift up to 10 lbs. and push up to 25 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 2-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws.

Text henleyjobs to 23000 to start your application today!Are you looking to reach your full potential Do you enjoy meeting new people and working in a team environment Whether you are looking for a part-time job with flexible hours, or a full-time career with excellent advancement opportunities, Henley Enterprises, Inc, the largest franchisee of Valvoline Instant Oil Change, is proud to offer you the tools necessary to succeed.We welcome all types of talent – no matter your background or experience. Wherever your confidence level is, we’ll make sure you’re trained in the services we offer including changing oil, check/filling vehicle fluids or inspecting/replacing lights and wipers. Our team of trainers are equipped to lead you through the path of self-made success. That’s why we do not require any experience in our service centers! It doesn’t matter if you’re a recent high-school grad, a well-seasoned professional looking for a change, a veteran transitioning back into civilian life or somewhere in the middle.THE TOOLS WE’LL PROVIDE TO YOU Paid on-the-job trainingNo late evenings – Most locations close by 7pm Competitive pay set at $20.25 per hourNow offering DailyPay! Have the flexibility to get paid dailyPromoting from within – 95% of upper-level management started out in an entry-level positionTuition ReimbursementEmployee Discount – 50% off most services for up to 2 vehiclesPaid vacation and holidaysMedical, Dental, Vision, and 401(k) Savings plan*Terms and conditions apply and benefits may differ depending on locationResponsibilitiesProvide exceptional customer service and address any concerns or questions.Perform oil changes, filter replacements, and lubrication services for vehicles.Inspect vehicles for any potential issues or areas that require attention.Conduct basic maintenance tasks such as tire rotations and fluid level checks.Basic computer knowledge/aptitudeKeep track of inventory and ensure all supplies are readily available.Maintain a clean and organized work environment.Follow safety protocols and guidelines to ensure a safe working environment.RequirementsAttention to detail and ability to follow instructions.Excellent problem-solving skillsStrong customer service and communication skillsAbility to work in a fast-paced environment and handle multiple tasks.Able to learn and follow the VIOC SuperPro process for all services.Achieve SuperPro certification.Must have reliable transportation.Essential FunctionsInspecting and replacing car lights and wipers.Check fluid levels and add fluids to vehicle when necessary.Inspect/replace engine air filter and cabin air filter.Add oil to engine in the proper amount based on specifications of vehicle make/model.Able to remove/rotate/lift/reinstall tires for tire rotation service.Lubricate necessary components of the chassis/driveline.Perform additional services on cooling systems and transmissions.Perform second checks by visually verifying and performing proper callouts to ensure all necessary services have been performed correctly.Able to move from bay to bay to perform services on multiple vehicles.Frequently ascends/descends stairs/catwalks/stepstools to retrieve vehicle parts (filters, wipers, etc.) or perform services top side or underneath the vehicle (drain oil, replace filter, differential services, lubrication)Able to work for extended periods of time with arms above your head when performing services underneath the vehicle on a catwalk.Constantly positions self to perform required services under the hood, related to tires, or on catwalk working underneath the vehicle.Able to move/transport items up to approximately 50 pounds.Able to work with tools to perform duties in tight sometimes hard to reach areas.Communicate verbally and receive verbal communication to ensure services are performed accurately, safely and in the proper order.EnvironmentIn this position you will be subject to environmental conditions. Activities occur inside and outside and in varying temperature conditions.In this position you will be subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above ambient noise level.In this position you will be subject to hazards. Includes a variety of conditions including but not limited to proximity to moving mechanical parts, moving vehicles, electrical current, exposure to high heat, and exposure to chemicals.In this position you will be subject to atmospheric conditions. One or more of the following conditions that may affect the respiratory system or skin: fumes, odors, dust, mists, gases, restricted ventilation.In this position you will be required to function in narrow aisles or passageways such as catwalks.The above description is not intended to be an "all-inclusive" list of the duties and responsibilities of the job described, nor is it intended to be such a listing of the skills and abilities required to do the job. Rather, it is intended only to describe the general nature of the job.Henley Enterprises, Inc. and its affiliates are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.#AB1131#

Join our team of more than 34,000 team members, supporting our members and communities in our Club Support Center, 235+ clubs and eight distribution centers. BJ’s Wholesale Club offers a collaborative and inclusive environment where all team members can learn, grow and be their authentic selves. Together, we’re committed to providing outstanding service and convenience to our members, helping them save on the products and services they need for their families and homes. The Benefits of working at BJ’s• BJ’s pays weekly•Eligible for free BJ's Inner Circle and Supplemental membership(s)*• Generous time off programs to support busy lifestyles* o Vacation, Personal, Holiday, Sick, Bereavement Leave, Jury Duty• Benefit plans for your changing needs* o Three medical plans**, Health Savings Account (HSA), two dental plans, vision plan,flexible spending • 401(k) plan with company match (must be at least 18 years old)*eligibility requirements vary by position**medical plans vary by locationThis role is in Portsmouth, NHJob SummaryReceives, rotates, wraps, and merchandises fresh and processed meats. Assists in merchandising seafood, rotisserie chickens, prepared foods, and cheeses. Provides assistance to Members by answering questions and recommending products.Maintains all cleaning and safety standards within the meat department. Team Members:Carry out job functions and responsibilities as assigned. Support the application of club policies, procedures and compliance. We strive for flawless execution and hold ourselves accountable .Acts with honesty and integrity and lead with the member in mind to address any and all concerns and to escalate any concerns, as appropriate.Ensure a safe and positive environment for our members and each other.Embrace inclusion and diversity, by working together with collaboration and respect. Work as a team to achieve goals. Move with speed and agility in everything we do. Innovate and adapt so we can move as fast as the world around us. Maintain a friendly and positive attitude. Members:Deliver service excellence through all points of contact.Resolve and deescalate to address every member concern. Ensure a safe and positive environment and experience for the members. Daily commitment to GOLD Member StandardsGreet, Anticipate, Appreciate (GAA)Fast, Friendly Full, Fresh, CleanClub Standards: Work as a team to deliver GOLD club standards daily. Work with commitment and pride to deliver GOLD- Grand opening look dailyAll items stocked and promotional plans executedMaintain visible accurate signageClean and organized, inside and outKnow your Business:Understand how to access and read production and/or financial performance reporting for your departmentSee the connection between consistent execution and the positive impact it can have on the businessMajor Tasks, Responsibilities, and Key AccountabilitiesProvides assistance to Members by answering questions regarding meats, poultry, and seafood. Makes recommendations on food products when necessary. Weighs, packages, wraps, and labels cuts of meat, poultry, and seafood, including grinds. Assists the meat cutter in packaging freshly cut meats and seafood. May grind hamburger meat. Inspects and stores meat upon delivery. Ensures that all delivered meat meets or exceeds company quality standards. Ensures the meat, seafood, prepared foods, and cheese cases are fully stocked. Rotates meats, poultry, seafood, prepared foods, and cheeses according to expiration dates. Follows established guidelines when disposing of damaged and/or expired products. Receives and unpacks meat, poultry, seafood, prepared foods, and cheeses in the meat cooler and freezer. Cleans and sanitizes all equipment, display fixtures, and areas in the meat department, including the meat cooler, freezer, and refrigerated display cases. Maintains all club policies and procedures. Performs other duties as assigned, including working in other departments as needed. Regular, predictable, full attendance is an essential function of this job. QualificationsPrevious experience working with fresh and processed meats preferred. Knowledge of automatic/hand wrapping machines preferred. Prior experience working in a meat and/or deli department preferred. At least 18 years of age. Environmental Job ConditionsMost of the time is spent moving about frequently on hard surfaces. There may be a need to occasionally position oneself to examine or scan merchandise, including bending, handling, pulling, reaching, and/or stooping. Frequently requires lifting objects up to 30 pounds. May require lifting and moving heavy and/or awkward objects more than 30 pounds with assistance. Located in a comfortable indoor area with infrequent exposure to temperature extremes and loud noises. There may be occasional exposure to cleaning agents.

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision