Springfield, MA 01103 • (36.8 miles) • Full Time • 9/20/2026

Job SummaryThe Building Electrical Group is responsible for all building electrical systems including lighting, fire protection and low voltage for our design build, industrial projects. We design and build food and beverage production facilities. Our building electrical team is involved with designing the electrical systems, calculating power loads, determining, and selecting equipment sizes, and vetting and selecting suitable vendors, suppliers, and sub-contractors. The professional will have technical responsibility for scoping, performing, and delivering multiple concurrent project assignments. His/her specific responsibilities will include, but not limited to:ResponsibilitiesDesign electrical systems for buildingpower, i.e. normal, emergency, and standby power distribution systems for

Springfield, MA 01103 • (36.8 miles) • Full Time • 9/20/2026

Dennis Group’s Mechanical Engineers design and implement mechanical systems as part of a broad engineering and architectural team in designing and building food and beverage production facilities. Specifically, HVAC, plumbing / utility, and fire suppression systems. Our mechanical team is involved with designing the mechanical systems, calculating space heat and cooling loads, determining and selecting equipment sizes, and vetting and selecting suitable vendors, suppliers, and sub-contractors. Mechanical Engineers will have technical responsibility for scoping, performing, and delivering multiple concurrent project assignments. You will be a member of our mechanical department and your responsibilities will include, but not be limited to:ResponsibilitiesPerform heating and cooling load cal

Springfield, MA 01103 • (36.8 miles) • Full Time • 9/20/2026

ResponsibilitiesApply extensive and diverse knowledge of principles and practices for a wide range of materials and construction techniques.Perform hand calculations and create computer analysis models for structural design tasks.Determine the correct building codeLocate any local or site-specific amendments to the building codeDocument gravity design loads, wind design loads, and seismic design loadsWork with and design common structural framing systems (steel, composite steel, joists)Work with and design common foundations systems (Spread footings, drilled piers)Estimate foundation types & sizes and preliminary steel sizesCoordinate structural work with other disciplinesReview geotechnical reportsDesign mat slabs for process tanks, vessels, and silosDesign pipe bridgesPerform take offs f

Springfield, MA 01103 • (36.8 miles) • Full Time • 9/20/2026

Dennis Group Civil Engineers focus on the land development and infrastructure for our industrial projects that involve designing and building new food and beverage process facilities. Our Civil Engineers have strong technical and design ability and excellent communication skills in designing land development plans, building pads, infrastructure for new buildings, landscaping, and everything from the foundation and below. Civil Engineers are part of our Building Systems department and work closely with Structural Engineers and Architects/Designers. They are also involved with bid evaluation and local contractor initial contact in multiple project locations. The role is highly valuable at Dennis Group and faces engineering challenges that require strong calculation skills and for experienced

Springfield, MA 01103 • (36.8 miles) • Full Time • 9/20/2026

Job SummaryDennis Group Structural Engineers ensure structures are durable and safe for our industrial projects that involve designing and building food and beverage process facilities. Our Structural Engineers have strong technical, analytical, design, mathematical, and problem-solving skills. The role is key in designing, permitting, and providing expertise in strength, stability, and stresses for various structures of our construction of new processing facilities and alterations to existing facilities. Members of our structural department have responsibilities that include, but notbelimited to:ResponsibilitiesApply extensive and diverse knowledge of principles and practices for a wide range of materials and construction techniques.Perform hand calculations and create computer analysis m

Springfield, MA 01103 • (36.8 miles) • Full Time • 9/20/2026

Job SummaryThe Building Electrical Group is responsible for all building electrical systems including lighting, fire protection and low voltage for our design build, industrial projects. We design and build food and beverage production facilities. Our building electrical team is involved with designing the electrical systems, calculating power loads, determining, and selecting equipment sizes, and vetting and selecting suitable vendors, suppliers, and sub-contractors. The professional will have technical responsibility for scoping, performing, and delivering multiple concurrent project assignments. His/her specific responsibilities will include, but not limited to:ResponsibilitiesDesign electrical systems for buildingpower, i.e. normal, emergency, and standby power distribution systems for

Springfield, MA 01103 • (36.8 miles) • Full Time • 9/17/2026

As a design/build engineering firm and general contractor that designs and builds food and beverage processing facilities, Dennis Group’s Automation & Controls Engineers work closely with our process, packaging and building engineers to meet our clients’ expectations in startup, commissioning, and qualifying their food and beverage production facilities. The role requires regular onsite presence to ensure necessary diagnoses, troubleshooting, and operational startup of our client’s production lines, equipment, and facilities. Our Automation & Controls Engineers are frequently facing engineering challenges in applying standard engineering techniques to design, develop, and maintain instrumentation or control systems. Both software and hardware design and troubleshooting skills and abilities

Springfield, MA 01103 • (36.8 miles) • Full Time • 9/15/2026

Job SummaryThe Building Electrical Group is responsible for all building electrical systems including lighting, fire protection and low voltage for our design build, industrial projects. We design and build food and beverage production facilities. Our building electrical team is involved with designing the electrical systems, calculating power loads, determining, and selecting equipment sizes, and vetting and selecting suitable vendors, suppliers, and sub-contractors. The professional will have technical responsibility for scoping, performing, and delivering multiple concurrent project assignments. His/her specific responsibilities will include, but not limited to:ResponsibilitiesDesign electrical systems for buildingpower, i.e. normal, emergency, and standby power distribution systems for

Springfield, MA 01103 • (36.8 miles) • Full Time • 9/15/2026

ResponsibilitiesHandle basic issues and problems and refer more complex issues to higher-level engineerDesign and troubleshoot both software and hardware necessary for control systems utilizing PLCs for integration of manufacturing systems.Automate manufacturing processes through the use of instrumentation or controls systems.Design, diagnose, and troubleshoot network infrastructures - Ethernet, DeviceNet, AS-i, Profibus etc.Develop new PLC applications, interfaces, or embedded controlsDevelop new or modify existing set-up and commissioning of new facilities or upgrading of existing facilitiesDesign, specify, wire, and procure control panel equipment, e.g. safety circuits, I/O, networks, etc.Design, specify, and procure electrical equipment, e.g. MCCs, panelboards, transformers, etc.Specif

Springfield, MA 01103 • (36.8 miles) • Full Time • 9/2/2026

You will be a member of our mechanical department and your responsibilities will include, but not be limited to:ResponsibilitiesMay work independently or with other ME’s, depending on project sizeExecute all tasks necessary to complete the engineering on a project from conceptual design through executionPerform heating and cooling load calculationsPerform mass energy balance calculationsPerform drainage and line loss calculationsEquipment sizing and selectionDevelop Mechanical / Utility equipment and construction specificationsDevelop P&ID’s, equipment layout plans, plant / process utility piping (steam, hydronic, CA) distribution plans, andsystem detailsP&ID design & draftingSize and develop layouts for ductwork and piping plansControls functional description developmentCreate equipment s

Springfield, MA 01103 • (36.8 miles) • Full Time • 9/2/2026

Job SummaryDennis Group’s process engineers are key in our projects of designing and building food and beverage processing facilities. Process Engineers work in every aspect of a project - controls, packaging, mechanical, electrical, building system, architecture, etc., from the conceptual stages to design completion, and throughout construction. They provide expertise in flow diagrams, alterations, constraints, piping and instrumentation diagrams (P&ID), layout, install, and commissioning and start-up. Process engineers enable operational efficiencies for the food and beverage process plants of our clients. Responsibilities will include, but not be limited to:ResponsibilitiesDeveloping process design basis and select unit operationsDevelop operation specificationsCoordinate with other pro

Springfield, MA 01103 • (36.8 miles) • Full Time • 9/2/2026

Job SummaryPackaging Engineers work closely with our process, controls, and building system engineers to scope, layout, install, and commission packaging equipment lines for our food and beverage industry clients. Dennis Group is a design build engineering firm and general contractor that designs and builds food and beverage processing facilities. As such, our packaging engineers are involved with defining packaging equipment project requirements, estimating packaging equipment costs, creating packaging flow diagrams, providing onsite construction support, and start-up and commissioning the packaging equipment. As a Packaging Engineer, your responsibilities will include, but not be limited to:ResponsibilitiesDesign: Create basis of design and scope of work documentsDevelop design conceptsD

Springfield, MA 01103 • (36.8 miles) • Full Time • 9/2/2026

Job SummaryPackaging Engineers work closely with our process, controls, and building system engineers to scope, layout, install, and commission packaging equipment lines for our food and beverage industry clients. Dennis Group is a design build engineering firm and general contractor that designs and builds food and beverage processing facilities. As such, our packaging engineers are involved with defining packaging equipment project requirements, estimating packaging equipment costs, creating packaging flow diagrams, providing onsite construction support, and start-up and commissioning of the packaging equipment. As a packaging engineer, your responsibilities will include, but not be limited to:ResponsibilitiesDeveloping design concepts, estimates and functional specifications for packagi

Springfield, MA 01103 • (36.8 miles) • Full Time • 9/2/2026

Job SummaryDennis Group’s Process Engineers are key in our projects of designing and building food and beverage processing facilities. Process Engineers work in every aspect of a project - controls, packaging, mechanical, electrical, building system, architecture, etc., from the conceptual stages to design completion, and throughout construction. They provide expertise in flow diagrams, alterations, constraints, piping and instrumentation diagrams (P&ID), layout, install, and commissioning and start-up. Process engineers enable operational efficiencies for the food and beverage process plants of our clients. Responsibilities will include, but not be limited to:ResponsibilitiesExecute all tasks necessary to complete the engineering on a project for design through execution with minimal supp

Springfield, MA 01103 • (36.8 miles) • Full Time • 9/2/2026

Job SummaryPackaging Engineers work closely with our process, controls, and building system engineers to scope, layout, install, and commission packaging equipment lines for our food and beverage industry clients. Dennis Group is a design build engineering firm and general contractor that designs and builds food and beverage processing facilities. As such, our packaging engineers are involved with defining packaging equipment project requirements, estimating packaging equipment costs, creating packaging flow diagrams, providing onsite construction support, and start-up and commissioning the packaging equipment. As a Packaging Engineer, your responsibilities will include, but not be limited to:ResponsibilitiesDesign: Create basis of design and scope of work documentsDevelop design conceptsD

Springfield, MA 01103 • (36.8 miles) • Full Time • 9/29/2026

His/her specific responsibilities will include, but not limited to:ResponsibilitiesDesigning electrical systems for buildingpower, i.e. normal, emergency, and standby power distribution systems for 208v, 480v, and medium voltage for industrial facilities.Execute duties on larger projects independentlyClient contact and lead engineerDocumenting all necessary calculations for the design such as short circuit, selective coordination, arc flash, generator sizing, steady state and transient voltage drops, load calculations, conductor sizing, raceway fills, etc.Maintains project document organizationManage time and meet commitmentsUnderstands Ohms Law, AC/DC, Electric and magnetic fieldsUnderstands power system theory – 3-phase vector math, power factor, symmetrical componentsUnderstands capacit

Springfield, MA 01103 • (36.8 miles) • Full Time • 9/28/2026

Job SummaryThe Building Electrical Group is responsible for all building electrical systems including lighting, fire protection and low voltage for our design build, industrial projects. We design and build food and beverage production facilities. Our building electrical team is involved with designing the electrical systems, calculating power loads, determining, and selecting equipment sizes, and vetting and selecting suitable vendors, suppliers, and sub-contractors. The professional will have technical responsibility for scoping, performing, and delivering multiple concurrent project assignments. His/her specific responsibilities will include, but not limited to:ResponsibilitiesDesigning electrical systems for buildingpower, i.e. normal, emergency, and standby power distribution systems

Springfield, MA 01103 • (36.8 miles) • Full Time • 9/28/2026

Job SummaryWe are seeking an ambitious Environmental / Industrial Wastewater Engineer to grow with our environmental engineering group. In this role you will work closely with our civil, process, mechanical, and architectural professionals to scope, permit, design, lay out, install, and commission industrial wastewater systems for our food and beverage clients.Responsibilities:Assisting project management with the development of project scope, budget, and schedule for all environmental related workConducting site audits to aid in site selection decisionsEvaluating air and wastewater quality parameters and designing an optimized treatment processPreparing process flow and piping and instrumentation diagramsSizing and specification of air and wastewater treatment processes and utilitiesProfi