FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

This Systems Engineering Supervisor will be responsible for managing the planning, design and the installation of all Sortation Equipment by Systems Engineering. Direct on-site management will be required to ensure the success of concurrent projects. This position will work side by side with Systems Programming in the development of reliable equipment that provides the most effective cost/benefit to UniFirst Corporation. The Systems Design and Installation Supervisor will report directly to the Systems Engineering Manager. List the general responsibilities and descriptions of key tasks and their purpose, relationships with customers, coworkers, and others, and the results expected of incumbent employees. Responsibilities: Budgeting, Design and Planning Perform Plant assessments and provide system recommendations for approval.Assist in the Design of Systems that will improve plant productivity, efficiency and provide for regional growth.Maintain and provide accurate records or project spending.Develop transitional plans that will allow for system installation without major impact to plant operations or UniFirst Customers.Effectively communicate to Executive and Plant ManagementSystem prerequisitesLabor demand, quantity and quality.Equipment operation and the impact on production flow.Installation timeline.Transitional difficulties. Safety Maintain safe working environment during installation for both Contractors and Plant Employees.Install systems that comply with all applicable Local and National Safety Codes.Train and promote safety in the proper use and maintenance of installed equipment.Provide documentation for all installed equipment Installation Management Effectively schedule and utilize inside/outside contractors to complete project.Coordinate resources based on UniFirst Corporation priorities.Aggressively manage project costs, without sacrificing system safety or operational effectiveness.Communicate daily and weekly expectations to contactors.Provide accurate drawings and installation details.Reduce downtime by making sure all necessary parts are on hand.Provide critical decision making to resolve design and installation conflicts.Provide Hands On Mechanical/Electrical work and Supervision to UniFirst and contractor personnel during installation of systems.Continual Improvement-System design and installationQualificationsRequirements: Hold Mechanical/Technical degree, certification or equal “On the Job” experience.Minimum 2 years experience designing and managing projects in the Industrial Conveyor/Material Handling Field.Candidate must be willing to directly managing project installation.Report for work at local Branch/Plant when not on the road.Experience with AutoCAD to develop detailed mechanical layouts/ diagrams for conveyors, sorters, and storage equipment.Experience with MS Office, Word,Excel, MS Project.Must be a team player. He/She will be a part of an overall process where interaction with other employees is essential. The candidate must enjoy having a fluid interchange of ideas and recommendations from both Engineering and Plant Management.Strong training and presentation skillsMust have strong analytical skillsExcellent verbal, leadership, Integrity and Communication skillsMust have ability to make decisions in time-sensitive situations The estimated base salary for this position ranges from $80,000.00 to $90,000.00 annually with additional management bonus eligibility. This range reflects various factors, including but not limited to the applicant's skills, qualifications, and previous work experience. Additionally, geographic differentials may apply based on the location where the position is ultimately filled, which could affect the final compensation. Benefits & Perks: 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. UniFirst is an international leader in garment & Uniform services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

JOB DESCRIPTION: Lead Process Engineer Burlington, MA, USA Poly6, an emerging leader in aerospace and defense innovation, is enabling production of complex turbine engine designs by combining additive manufacturing, advanced computation and material science. Our technology is uniquely suited to increase the efficiency of complex manufacturing processes as well as advance engineering design capabilities. Long term benefits of Poly6’s products include reduced greenhouse gas emissions for the aviation sector. You will have the opportunity to work alongside a highly talented team to solve problems in one of the world’s most complex engineering sectors: aviation. JOB SUMMARY Reporting to the Plant Engineering Manager, the Lead Process Engineer - Additive Manufacturing will be primarily focused on the process control and technical execution of additive manufacturing processes within the manufacturing facility in Burlington, MA, and secondarily to assist with technology transfer to a scaled greenfield manufacturing facility in Ohio. This position requires a strong working knowledge of process control, manufacturing, materials science, with strong investigational and root cause analysis skills. Specific job-related responsibilities include: RESPONSIBILITIES Lead the control and optimization of manufacturing processes, focusing on stability, statistical process control (SPC), and effective change management during scale-up. Maintain and analyze process parameters, connecting process inputs to product outputs to optimize control limits and enhance overall product quality. Understand and optimize material interactions with manufacturing processes to improve product performance and reliability. Measure and control Key Process Variables (KPVs), diagnosing and monitoring out-of-control events to ensure stable and predictable operations. Contribute to cross-functional projects aimed at process control, scrap reduction, and continuous improvement. Support root cause analyses for process non-compliances and ensure timely corrective actions. Help maintain robust process documentation, identifying and implementing opportunities for workflow improvements. Provide hands-on technical assistance, including repairing, improving, installing, maintaining, and validating manufacturing equipment. Collaborate cross-functionally on continuous improvement initiatives related to equipment implementation, cost reduction, and productivity enhancements. Support product engineering efforts by providing process analysis, data reporting, and recommendations. Standardize preventative maintenance systems and documentation for manufacturing equipment, ensuring adequate training for seamless handoff to operational counterparts. Offer rapid-response daily production support, including personnel training, data/scrap analyses, troubleshooting process problems, and performing equipment maintenance. Support Design of Experiments (DOEs) and trial execution to validate process improvements and changes, including participation in PFMEA and JSA initiatives as needed. Participate in special projects as assigned by management. QUALIFICATIONS Bachelor’s degree in Engineering (or related field) with 2-4 years of relevant experience, or 4+ years of equivalent experience in a manufacturing environment. Demonstrated experience in controlled manufacturing environments focusing on process control, process improvement, and operational excellence. Proficiency in applying SPC and DOE methodologies for process analysis and improvement. Working knowledge of statistical analysis software (e.g., Minitab, JMP) and advanced Microsoft Excel skills. At least 1 year of practical experience applying Six Sigma principles in manufacturing, with documented project successes. Hands-on experience with manufacturing equipment, processes, and related software tools. PREFERRED EXPERIENCE Experience with polymer or similar material applications in industrial manufacturing. Strong skills with the Microsoft Office suite. Excellent verbal and written communication abilities, with a track record of working effectively across engineering and operations teams. Hands-on experience operating, maintaining, and optimizing production processes, including familiarity with CAD models and related tools. Understanding of processes, systems, and technical aspects of scaled manufacturing operations. A data-driven mindset focused on driving innovation and improving process capability and efficiency. Six Sigma Green Belt or equivalent certification. Experience with control plans and data collection systems for process monitoring and reporting. Involvement in new process development and scale-up activities. Understanding of material interactions within manufacturing processes and the ability to optimize for improved performance. This position requires access to information protected under U.S. export control laws, including the International Traffic in Arms Regulations and/or the Export Administration Regulations. Please note that any offer for employment may be conditioned on authorization to receive software or technology controlled under these U.S. export laws without sponsorship for an export license. Poly6 is an equal opportunity employer. We do not discriminate based on age, color, genetic information, religion, sex, veteran status, or national origin. This is a non-management positionThis is a full time position

Wollaston Alloys/CPP Boston is a stainless steel and high alloy sand casting foundry that has been based in Braintree, MA for over 60 years! We manufacture components for the defense market as well for commercial markets such as power generation industries. Wollaston Alloys/CPP Boston is a fast-paced company that has continued to grow over its long history! Wollaston Alloys/CPP Boston is seeking a driven individual to join our team as a Methoding Processing Engineer! The Methoding Processing Engineer is a crucial position within our facility. This is an excellent opportunity for to join a fast-paced company that has continued to grow over the past 60 years! CPP offers a competitive compensation and benefits package, which includes a bonus program, medical/dental/vision/life/disability insurance, 401K with match, paid vacation and holidays, paid training, and a great team culture!Essential Job Functions/Duties Communicate effectively with internal customers providing updates to progress against key milestones.Manage scrap reduction in the production operation.Design and simulate pattern rigging for new and existing product and create process techniques to produce and control the metallurgical and NDT integrity of the product.Develop and maintain operational sequences for part manufacture in conjunction with Administrative, Manufacturing, Quality, and NDT disciplines.Create and manage project timelines to move product through the shop, providing regular status updates to engineering and production management.Develop and manage BOMs and ensure accurate standard costs.Keep milestone updates and obtain agreements from internal customers.Troubleshooting in production processes related to Engineering.Create and maintain the documentation of work instructions and procedures for front end production processes.Work with shop floor personnel to provide an understanding of work instructions.Oversee NPI sampling process.Maintain engineering records of tooling, procedures, and customer drawings. QUALIFICATIONSRequired Qualifications: Education: Bachelor’s degree in engineering or related field requiredExperience: Required: 1+ years in a manufacturing setting. Plus: 2+ years in sand or investment casting foundry.Other Required Knowledge, Skills & Abilities: Attention to detail, ability to communicate at all levels of the organization, working knowledge of SolidWorks (or equivalent CAD software), MS Office Suite (Word, PowerPoint, Excel), ability to work with others through complex situations. CPP-Boston is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. CPP-Boston, as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. This is a full time position

Who we areWith its A.I.-powered robotic technology platform, Symbotic is changing the way consumer goods move through the supply chain. Intelligent software orchestrates advanced robots in a high-density, end-to-end system – reinventing warehouse automation for increased efficiency, speed and flexibility.What we needWe are looking for a Senior Embedded Software Engineer to join our Safety Technologies Software team. Your job will be to design and develop software strategies for a real-time ARM-based platform that has functional safety requirements.What we doSymbotic is building safety-critical systems leveraging advanced computer vision, robotics, and 3D sensing that will transform warehouse automation. The Safety Technologies Software teamis tasked with developing a high-performance multiprocessor computer vision system, an embedded application that interfaces with industrial robots for safety controls and monitoring, as well as an intuitive engineering application which is used to design and configure the system.What you’ll doDesign and develop software strategies for real time ARM-based platform in C that has functional safety requirements. Implement, document and maintain Linux and embedded real- time code and shell scripts (PERL, Bash, Python). Analyze failure modes as well as design redundancy and fail-safe mechanisms into the software to ensure the system always results in a safe system. Create C-based unit and integration tests that verify and validate the functionality of the embedded platform and ensure your code meets test coverage goals. Support system testing of components and subsystems. Collaborate with our hardware team, review schematics, and develop software to support peripherals on a custom hardware platform. Troubleshoot system problems in production or design by investigating issues related to product performance or production difficulties, primarily through log analysis. Support board bring-up. Participate in a rigorous review process (code and design) to ensure your software meets our quality bar. Use Git to ensure commits are well-organized and traceable to our requirement tracking system. What you’ll needAt least 8 years of professional experience developing real time embedded software and device drivers. Familiarity with networking protocols and control systems. A minimum of a Bachelor of Science in a related engineering discipline (i.e. Computer Science, Mathematics, Electrical Engineering, etc.). Experience with software process and version control tools. Strong background in Linux shell scripting (especially Python and bash), familiarity with grep, regex and parsing; and file system command line utilities. In-depth knowledge of real time or embedded operating systems (e.g.,VxWorks, FreeRTOS, SafeRTOS) and threading and communication issues related to real time operating systems (for mobile robotics or control systems would be ideal). POSIX multi-threading (thread priority, thread arbitration), synchronization mechanisms (mutexes, semaphores), shared memory, event and signal handling, and inter-process communications. Low level communication protocols and sockets implementations, UDP, TCP/IP, TCP/NFS, and related alignment and packing issues. Experience with programming and debugging for memory-constrained systems. Experience in regulated environments such as functional safety or medical devices is a plus Our EnvironmentUp to 10%travel may be required. Employees must have a valid driver’s license and the ability to drive and/or fly to client and other customer locations. The employee is responsible for owning a credit card and managing expenses personally to be reimbursed on a bi-weekly basis. #LI-EJ1#LI-HybridAbout SymboticSymbotic is an automation technology leader reimagining the supply chain with its end-to-end, AI-powered robotic and software platform. Symbotic reinvents the warehouse as a strategic asset for the world’s largest retail, wholesale, and food & beverage companies. Applying next-gen technology, high-density storage and machine learning to solve today's complex distribution challenges, Symbotic enables companies to move goods with unmatched speed, agility, accuracy and efficiency. As the backbone of commerce the Symbotic platform transforms the flow of goods and the economics of supply chain for its customers. For more information, visitwww.symbotic.com.We are a community of innovators, collaborators and pioneers who embrace our differences, because we know unique perspectives make us stronger and smarter. Every perspective matters. We depend on the collective voices of our employees, customers and community to help guide us as we build a better place to work – for you and the world. That’s why we’re proud to be an equal opportunity employer.We do not discriminate based on race, color, ethnicity, ancestry, religion, sex, national origin, sexual orientation, age, citizenship status, marital status, disability, gender identity, gender expression, veteran status, or genetic information.

Overview: GovCIO is currently hiring for a Journeyman Unified Communications Deployment Engineer to provide telecommunications support to their local area, and travel around the US for unified communications deployment activities. This position is primarily located in Boston, MA and is an onsite position. Responsibilities: Performs a variety of electronic and technical assignments on data, telecom, and audiovisual communications equipment and systems. Completes endpoint troubleshooting using appropriate diagnostic equipment. Installs terminals, controllers, and test equipment and restores nonworking lines and/or equipment to working condition. Maintains liaison with outside vendors and orders circuits and/or equipment as required. Requires knowledge of specific hardware, test equipment, and terminal configuration. May develop recommendations for the combined usage of data processing and telephone system hardware and software.Conducts site surveys and meets contacts like clients, construction crew members, utility company personnel, and people from other departments within the Company.Installs, moves, commissions, and modifies audiovisual, telecommunications and related equipment according to job order specifications, standards, and procedures.Undertakes systems upgrades and answers queries related to system controls, and maintenance of the systems in general.Diagnoses equipment malfunctions. Maintains and repairs systems and equipment according to manufacturer recommendations and specifications.Reports and monitors service order changes.Be responsible for general local video operations and maintenance support as part of normal IT site support duties. This task does not include designing, engineering, specifying or acquiring video equipment. This support shall include basic troubleshooting of system problems and repairs, when they are identified by enterprise video support staff.Work with enterprise level voice and video engineers and technicians to conduct more detailed remote troubleshooting and repairs.Assist in setting up presentation devices and Video Conference units and provide basic troubleshooting support as needed. This includes ensuring functionality, being available for events, and shutting down video conferences.Perform local voice operations and maintenance support related to videoteleconferences. This support shall include basic troubleshooting of system problems and repairs whenthey are indicated by enterprise voice support staff. This task does not include designing, engineering,specifying or acquiring voice communications equipment.Provide on-call support by identifying, researching, and resolving technical problems received via the ServiceNow ticketing system.Interact with network services, software systems engineering, and/or applications development to restore service and/or identify and correct core problems. Perform routine system maintenance and analysis functions, including hardware configurations and adding, removing and replacing equipment components.Below is a non-comprehensive list of technologies that the technician may encounter. The ideal candidate will understand the purpose of these technologies and have some experience with them, or with equivalent technologies:Cisco IP audio and video endpoints, Unified Call Manager (CUCM), Expressway Meeting Server (CMS), Meeting Management (CMM), Telepresence Management Suite (TMS), Prime, and Identify Services Engine.Broadsoft CloudMicrosoft System Center Configuration Manager (SCCM)Avaya technologies including audio/video components, Communicator, One-X, Application Enablement Server (AES), and the following at version 6.0 or above: Communications Manager, Session/System Manager, and Aura Messaging.Polycom DMA, Real Presence, and endpointsSolarwindsSplunk (syslog)CyberArkICAM / Single Sign On methodologies (SSO) / CertificatesInfoBlox / AkamaiSIP routing, dial pattern and number translations, E.164 routing, PRI as well as standards-based codecs, to include codecs from Cisco and PolycomVideo Conferencing Services (VCS) infrastructureUnified Communications and Video conferencing, including but not limited to: Cisco Unified Communications Manager, Unity Connection, TEAMS, UCCX, Expressways, Jabber Client, SIP, H.323, and QoSSession Border Controllers (SBC), Cisco Unified Border Elements (CUBEs) Qualifications: High School with 0-3 years (or commensurate experience)Clearance Required: Must be able to obtain and hold a Public Trust ClearanceRequired Skills and ExperienceUSCitizenHigh degree of technical proficiencyExcellent problem-solving skills and analytical abilitiesMust be prepared for regional travel up to 25% at customer locations.#NSS#NEON#DL Company Overview: GovCIO is a team of transformers--people who are passionate about transforming government IT. Every day, we make a positive impact by delivering innovative IT services and solutions that improve how government agencies operate and serve our citizens.But we can't do it alone. We need great people to help us do great things - for our customers, our culture, and our ability to attract other great people. We are changing the face of government IT and building a workforce that fuels this mission. Are you ready to be a transformer We are an Equal Opportunity Employer.All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, gender identity or expression, sexual orientation, national origin, disability, or status as a protected veteran. EOE, including disability/vets. Posted Pay RangeThe posted pay range, if referenced, reflects the range expected for this position at the commencement of employment, however, base pay offered may vary depending on multiple individualized factors, including market location, job-related knowledge, skills, education, experience, and internal equity. The total compensation package for this position may also include other compensation elements, to be discussed during the hiring process. If hired, employee will be in an “at-will position” and the GovCIO reserves the right to modify base salary (as well as any other discretionary payment or compensation program) at any time, including for reasons related to individual performance, GovCIO or individual department/team performance, and market factors. Posted Salary Range: USD $70,000.00 - USD $70,000.00 /Yr.

Join our team of more than 34,000 team members, supporting our members and communities in our Club Support Center, 235+ clubs and eight distribution centers. BJ’s Wholesale Club offers a collaborative and inclusive environment where all team members can learn, grow and be their authentic selves. Together, we’re committed to providing outstanding service and convenience to our members, helping them save on the products and services they need for their families and homes. The Benefits of working at BJ’s• BJ’s pays weekly•Eligible for free BJ's Inner Circle and Supplemental membership(s)*• Generous time off programs to support busy lifestyles* o Vacation, Personal, Holiday, Sick, Bereavement Leave, Jury Duty• Benefit plans for your changing needs* o Three medical plans**, Health Savings Account (HSA), two dental plans, vision plan,flexible spending • 401(k) plan with company match (must be at least 18 years old)*eligibility requirements vary by position**medical plans vary by locationAs a Lead Site Reliability Engineer (SRE) for BJ’s Wholesale Club’s digital team, you will play a critical role in ensuring the reliability, scalability, and performance of our digital platforms, including bjs. com, mobile apps, and in-club digital capabilities. Supporting the full lifecycle of digital experiences from order placement to fulfillment you will lead efforts to enhance system reliability, implement SRE best practices, and foster collaboration across teams. Key Responsibilities:Ensure Reliability and Scalability: Lead the design, deployment, and management of highly reliable and scalable systems for BJ's digital properties, including e-commerce platforms and mobile applications. Full-Stack Expertise: Responsible for analyzing and fixing issues for Java-based microservices, React applications, and respective backend servicesProactive Monitoring and Incident Response: Build and maintain monitoring systems using tools like New Relic, dataset, or similar to identify and resolve issues before they impact members. Collaboration and Leadership: Drive cross-functional collaboration with development and operations teams to align on goals for system performance and reliability. SRE Methodologies: Implement SRE principles to enhance service level objectives (SLOs), service level indicators (SLIs), and ensure a seamless customer experience. Automation and Optimization: Automate repetitive tasks and optimize workflows to improve operational efficiency and reduce toil. Incident Management: Lead root cause analyses for critical production incidents, generating detailed RCA reports and driving actions to prevent recurrence. Change Management: Ensure reliable deployments by following structured change management processes and leveraging version control systems. Security and Compliance: Collaborate with security teams to ensure systems and applications meet stringent security standards. Qualifications:Educational Background: Bachelor’s degree in Computer Science, Engineering, or a related field (or equivalent experience). Experience: At least 6+ years in SRE or related roles, with experience in large-scale e-commerce or digital platforms. Technical Skills:Strong hands-on knowledge of Java-based microservices and APIs. Proficiency in observability tools (e. g., New Relic, Splunk). Hands-on experience with automation scripts (Bash, Python). Experience with change management tools like terraform etcKnowledge in CI/CD, containerization (e. g., Docker, Kubernetes), and cloud technologies. Soft Skills:Exceptional communication skills to work effectively with cross-functional teams and leadership. Strong analytical and problem-solving abilities. Demonstrated ability to learn and adapt to new tools and technologies quickly. Job Conditions:Collaborate within a dynamic and innovative team environment. Participate and initiate cross-training and knowledge-sharing initiatives. Be part of an escalation on-call rotation to provide 24/7 support for critical systems and lead team during critical issues. This is a hybrid role. Tuesday through Thursday are in-office days at BJ's Club Support Center in Marlborough, MA and Monday and Friday are remote days. In accordance with the Pay Transparency requirements, the following represents a good faith estimate of the compensation range for this position. At BJ’s Wholesale Club, we carefully consider a wide range of non-discriminatory factors when determining salary. Actual salaries will vary depending on factors including but not limited to location, education, experience, and qualifications. The pay range for this position is starting from $109,000.00.

What this job involves:JLL is seeking an experienced HVAC professional with advanced expertise in Building Automation Systems (BAS), particularly Siemens Controls, for a cutting-edge role at a biotech company. This position is ideal for those looking to elevate their HVAC career by diving deep into the world of intelligent building systems. As our BAS Specialist, you'll be at the forefront of smart building technology, working with both new and legacy Siemens Controls. You'll collaborate closely with our controls team to design and implement state-of-the-art HVAC/BAS solutions that optimize energy efficiency and occupant comfort.What your day-to-day will look like:Develop complex control logic for HVAC systems.Implement advanced energy trending and analysis.Operate and troubleshoot sophisticated energy management equipment.Manage various BAS software applications.Design innovative HVAC solutions using the latest in building automation technology.Build strong relationships with stakeholders and clients.Evaluate and propose cutting-edge approaches to HVAC challenges.Collaborate with BAS control engineers to create tailored building management solutions.Develop and optimize programming logic for peak HVAC system performance.Diagnose and repair electronic control system issues.Consult with clients to address operational challenges and propose system enhancements.Provide expert training on BAS operations.Document job completions, training sessions, and system recommendations.Work Schedule: Dayshift, Monday – FridayDesired or preferred experience and technical skills:DESIGO and Siemens systems experience a plus!Associate degree in HVAC technology or related field.Experience with industry-specific software applications.Knowledge of various electronic/digital control systems and industry protocols (BACnet, Modbus).Familiarity with biopharmaceutical GMP environments.Understanding of Good Manufacturing Practices (cGMP) and Good Documentation Practices (GDP).Experience with CMMS systems, particularly Maximo.Required Skills and Experience:High school diploma or equivalent, plus trade school or apprenticeship in HVAC.5+ years of experience in electronic control systems and HVAC equipment.Proficiency in Microsoft Office suite.Ability to work in various physical environments and handle equipment up to 50 pounds.Valid driver's license.This role offers a unique opportunity to work at the intersection of HVAC and cutting-edge building automation technology. Join us in shaping the future of smart, energy-efficient buildings in the biotech industry.Estimated total compensation for this position:90,000.00 – 115,000.00 USD per yearThe total compensation range is an estimate and not guaranteed. An employment offer is based on an applicant's education, experience, skills, abilities, geographic location, internal equity and alignment with market data.#HVACjobs

ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday

This Systems Engineering Supervisor will be responsible for managing the planning, design and the installation of all Sortation Equipment by Systems Engineering. Direct on-site management will be required to ensure the success of concurrent projects. This position will work side by side with Systems Programming in the development of reliable equipment that provides the most effective cost/benefit to UniFirst Corporation. The Systems Design and Installation Supervisor will report directly to the Systems Engineering Manager. List the general responsibilities and descriptions of key tasks and their purpose, relationships with customers, coworkers, and others, and the results expected of incumbent employees. Responsibilities: Budgeting, Design and Planning Perform Plant assessments and provide system recommendations for approval.Assist in the Design of Systems that will improve plant productivity, efficiency and provide for regional growth.Maintain and provide accurate records or project spending.Develop transitional plans that will allow for system installation without major impact to plant operations or UniFirst Customers.Effectively communicate to Executive and Plant ManagementSystem prerequisitesLabor demand, quantity and quality.Equipment operation and the impact on production flow.Installation timeline.Transitional difficulties. Safety Maintain safe working environment during installation for both Contractors and Plant Employees.Install systems that comply with all applicable Local and National Safety Codes.Train and promote safety in the proper use and maintenance of installed equipment.Provide documentation for all installed equipment Installation Management Effectively schedule and utilize inside/outside contractors to complete project.Coordinate resources based on UniFirst Corporation priorities.Aggressively manage project costs, without sacrificing system safety or operational effectiveness.Communicate daily and weekly expectations to contactors.Provide accurate drawings and installation details.Reduce downtime by making sure all necessary parts are on hand.Provide critical decision making to resolve design and installation conflicts.Provide Hands On Mechanical/Electrical work and Supervision to UniFirst and contractor personnel during installation of systems.Continual Improvement-System design and installationQualificationsRequirements: Hold Mechanical/Technical degree, certification or equal “On the Job” experience.Minimum 2 years experience designing and managing projects in the Industrial Conveyor/Material Handling Field.Candidate must be willing to directly managing project installation.Report for work at local Branch/Plant when not on the road.Experience with AutoCAD to develop detailed mechanical layouts/ diagrams for conveyors, sorters, and storage equipment.Experience with MS Office, Word,Excel, MS Project.Must be a team player. He/She will be a part of an overall process where interaction with other employees is essential. The candidate must enjoy having a fluid interchange of ideas and recommendations from both Engineering and Plant Management.Strong training and presentation skillsMust have strong analytical skillsExcellent verbal, leadership, Integrity and Communication skillsMust have ability to make decisions in time-sensitive situations The estimated base salary for this position ranges from $80,000.00 to $90,000.00 annually with additional management bonus eligibility. This range reflects various factors, including but not limited to the applicant's skills, qualifications, and previous work experience. Additionally, geographic differentials may apply based on the location where the position is ultimately filled, which could affect the final compensation. Benefits & Perks: 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. UniFirst is an international leader in garment & Uniform services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

JOB DESCRIPTION: MANAGER, MANUFACTURING ENGINEERING Burlington, MA, USA Poly6 is enabling production of complex turbine engine designs by combining additive manufacturing with advanced materials. Our technology is uniquely suited to both increase the efficiency of complex manufacturing processes and advance engineering design capabilities, while achieving the long-term benefit of reducing greenhouse gas emissions. You will have the opportunity to work alongside a highly talented team to solve problems in one of the world's most complex engineering industries: aviation. JOB SUMMARY The Manufacturing Engineering Manager, reporting directly to the Plant Manager, is a dynamic technical leader responsible for overseeing a team of engineers. This role is accountable for driving continuous improvement in process capability, operational efficiency, and cost productivity within manufacturing operations, while ensuring that safety is integral to the DNA of the engineering team. The manager ensures the development and maintenance of reliable, predictable production processes that align with the company's ambitious growth strategy, including multi-site expansion and achieving a 20X increase in production volume over the next five years. RESPONSIBILITIES • Lead and develop the engineering team, providing leadership, mentorship, and development opportunities to ensure a high-performing and engaged workforce. • Oversee all production processes, including the creation, maintenance, and improvement of process documentation, ensuring adherence to quality and regulatory standards. • Implement and maintain best practices to enhance workplace safety across all manufacturing operations. • Improve yield, process capability, efficiency, capacity, and cost-effectiveness to meet production and business goals. • Develop, procure, install, validate, and support new manufacturing equipment and processes to support production demands and innovation. • Collaborate with cross-functional teams to scale new processes from prototype to full production. • Serve as the technical lead for knowledge transfer and standardization in support of a multi-site expansion project. • Develop and execute a vision for multi-site team expansion and ongoing execution. • Partner with facilities and maintenance teams to ensure seamless integration of manufacturing equipment and processes. • Define, measure & control KPVs, correlating to, and measuring against, product requirements. • Track business key performance indicators (KPIs) related to safety, quality, delivery, productivity, and cost, providing regular updates to leadership. • Champion Lean, Six Sigma, and other continuous improvement methodologies to enhance production processes and overall operational efficiency. • Work closely with R&D, quality, supply chain, and operations teams to align engineering initiatives with business objectives. QUALIFICATIONS • B.S. with 7-10 years' experience, or 12+ years' experience in a related field including chemical processing, injection molding, 3D printing, or ceramics manufacturing. • Minimum of 5 years' experience in an ISO 9001 or similar production manufacturing environment. • Minimum of 3 years' experience in a Fixed Process environment, preferably aerospace. • 5+ years' experience in engineering people management. • Proficiency in management of operational and quality metrics like OEE, yield, process capability. • Proficiency in Minitab, JMP or SAS engineering analysis tools. • Six Sigma Green Belt and 3+ years' applied Six Sigma engineering experience or 5+ years' applied Six Sigma engineering experience. • Experience managing across various TRL and MRL levels, with demonstrated capability for multi-site technology transfer. PREFERRED EXPERIENCE • Advanced proficiency in Minitab, JMP, or SAS engineering analysis tools. • 5+ years' experience in ceramic core for aerospace casting. • Six Sigma Black Belt. This position requires access to information protected under U.S. export control laws, including the International Traffic in Arms Regulations and/or the Export Administration Regulations. Please note that any offer for employment may be conditioned on authorization to receive software or technology controlled under these US export laws without sponsorship for an export license. Poly6 is an equal opportunity employer. We do nThis is a management positionThis is a full time position

Wollaston Alloys/CPP Boston is a stainless steel and high alloy sand casting foundry that has been based in Braintree, MA for over 60 years! We manufacture components for the defense market as well for commercial markets such as power generation industries. Wollaston Alloys/CPP Boston is a fast-paced company that has continued to grow over its long history! Wollaston Alloys/CPP Boston is seeking a driven individual to join our team as a QualityEngineer! The Quality Engineer is a crucial position within our facility. This is an excellent opportunity for to join a fast-paced company that has continued to grow over the past 60 years! CPP offers a competitive compensation and benefits package, which includes a bonus program, medical/dental/vision/life/disability insurance, 401K with match, paid vacation and holidays, paid training, and a great team culture! Major Responsibilities Coordinate with our customer’s Engineering, Quality, and Purchasing representatives, suppliers, and all departments and levels of CPP workforce providing, on a tactical level the technical support and the direction necessary to ensure compliance with the intent of customer quality expectations.Build an atmosphere of competence, cooperation and trust with customer representatives via Supplier Product, Systems and Qualification Surveys.Take active participation in our Continuous Improvement efforts, promote quality excellence, and encourage teamwork among ourselves and our customers.Be proactive, innovative, and creative using judgment and decision making in the implementation of necessary quality programs. Qualifications Bachelor’s degree from four-year college or university in Engineering or a related field; or one to two years related experience and/or training; or equivalent combination of education and experience.Must have a comprehensive knowledge of quality and quality systems, such as AS9100 orNADCAP.3 - 5 years of work experience in an foundry or related fieldFamiliarity with the investment casting industry and related processes is desirableStrong communication skills, good PC skills, program management skillsKnowledge of Six Sigma and Lean Manufacturing a plusAble to work independently with minimal directions Sponsorship is not available for this role. Candidates must be legally authorized to work in the US on a permanent and consistent basis without company sponsorship now and in the future. This is a non-management positionThis is a full time position

Who we areWith its A.I.-powered robotic technology platform, Symbotic is changing the way consumer goods move through the supply chain. Intelligent software orchestrates advanced robots in a high-density, end-to-end system – reinventing warehouse automation for increased efficiency, speed and flexibility.What we needSymbotic is looking for a Robotics Applications Engineer to join our Perception team. You will play a hands-on role in the design and implementation of the next generation of perception software for our mobile robots. The qualified candidate will play a hands-on role helping to bring our robotics solutions to our customers. We are looking for people who thrive in a creative, collaborative and agile development environment.What we do Our work matters – robotics is transforming the world of commerce. Every day our intelligent robots are responsible for getting food and merchandise to thousands of stores across North America. We’re an industry changer – we created the first and only fully autonomous, end-to-end supply chain solution. Today, we are driving towards even bigger ideas – and we have the people, technology, and leadership to fully realize these aspirations. We have the excitement and ambition of a startup with the benefits and resources of a proven organization.What you’ll doCollaborate with internal and external stakeholders to understand technical and business requirements.Design, develop, and maintain high-quality robotics applications for internal users and external customers.Develop and integrate solutions across various modules, including web-based dashboards, database, and robotics control.Create, execute, and maintain comprehensive test plans; identify and fix bugs while ensuring the integrity of the existing codebase.Contribute to system-level software design, ensuring scalability, reliability, and performance.Formulate, document, and maintain detailed requirements specifications.Analyze requirements and develop innovative solutions or effective workarounds to meet project needs.Identify potential project risks and proactively suggest and implement mitigation strategies.Up to 10% travel may be requiredWhat you’ll needBachelor or master’s degree in Robotics, Engineering, Computer Science, or a related technical field.Minimum 8 years of professional software development experience with Python and/or C++.Experience in database development using Kafka and Snowflake.Experience in messaging systems such as RabbitMQ and/or ZeroMQHands-on experience with ROS, Docker and Linux environments.Strong problem-solving skills and attention to detail.Familiarity with robotics remote operation and control applications is a big plusExperience in developing web-based applicationsExperience with project management and collaboration tools like JIRA, Confluence.Exposure to agile development practices and CI/CD pipelines.Familiarity with graphical user interfaces (GUI) developmentKnowledge of computer vision applications and libraries.Our EnvironmentUp to 10% of travel may be required. Employees must have a valid driver’s license and the ability to drive and/or fly to client and other customer locations.The employee is responsible for owning a credit card and managing expenses personally to be reimbursed on a bi-weekly basis.#LI-JT1#LI-HybridAbout SymboticSymbotic is an automation technology leader reimagining the supply chain with its end-to-end, AI-powered robotic and software platform. Symbotic reinvents the warehouse as a strategic asset for the world’s largest retail, wholesale, and food & beverage companies. Applying next-gen technology, high-density storage and machine learning to solve today's complex distribution challenges, Symbotic enables companies to move goods with unmatched speed, agility, accuracy and efficiency. As the backbone of commerce the Symbotic platform transforms the flow of goods and the economics of supply chain for its customers. For more information, visitwww.symbotic.com.We are a community of innovators, collaborators and pioneers who embrace our differences, because we know unique perspectives make us stronger and smarter. Every perspective matters. We depend on the collective voices of our employees, customers and community to help guide us as we build a better place to work – for you and the world. That’s why we’re proud to be an equal opportunity employer.We do not discriminate based on race, color, ethnicity, ancestry, religion, sex, national origin, sexual orientation, age, citizenship status, marital status, disability, gender identity, gender expression, veteran status, or genetic information.

This Systems Engineering Supervisor will be responsible for managing the planning, design and the installation of all Sortation Equipment by Systems Engineering. Direct on-site management will be required to ensure the success of concurrent projects. This position will work side by side with Systems Programming in the development of reliable equipment that provides the most effective cost/benefit to UniFirst Corporation. The Systems Design and Installation Supervisor will report directly to the Systems Engineering Manager. List the general responsibilities and descriptions of key tasks and their purpose, relationships with customers, coworkers, and others, and the results expected of incumbent employees. Responsibilities: Budgeting, Design and Planning Perform Plant assessments and provide system recommendations for approval.Assist in the Design of Systems that will improve plant productivity, efficiency and provide for regional growth.Maintain and provide accurate records or project spending.Develop transitional plans that will allow for system installation without major impact to plant operations or UniFirst Customers.Effectively communicate to Executive and Plant ManagementSystem prerequisitesLabor demand, quantity and quality.Equipment operation and the impact on production flow.Installation timeline.Transitional difficulties. Safety Maintain safe working environment during installation for both Contractors and Plant Employees.Install systems that comply with all applicable Local and National Safety Codes.Train and promote safety in the proper use and maintenance of installed equipment.Provide documentation for all installed equipment Installation Management Effectively schedule and utilize inside/outside contractors to complete project.Coordinate resources based on UniFirst Corporation priorities.Aggressively manage project costs, without sacrificing system safety or operational effectiveness.Communicate daily and weekly expectations to contactors.Provide accurate drawings and installation details.Reduce downtime by making sure all necessary parts are on hand.Provide critical decision making to resolve design and installation conflicts.Provide Hands On Mechanical/Electrical work and Supervision to UniFirst and contractor personnel during installation of systems.Continual Improvement-System design and installationQualificationsRequirements: Hold Mechanical/Technical degree, certification or equal “On the Job” experience.Minimum 2 years experience designing and managing projects in the Industrial Conveyor/Material Handling Field.Candidate must be willing to directly managing project installation.Report for work at local Branch/Plant when not on the road.Experience with AutoCAD to develop detailed mechanical layouts/ diagrams for conveyors, sorters, and storage equipment.Experience with MS Office, Word,Excel, MS Project.Must be a team player. He/She will be a part of an overall process where interaction with other employees is essential. The candidate must enjoy having a fluid interchange of ideas and recommendations from both Engineering and Plant Management.Strong training and presentation skillsMust have strong analytical skillsExcellent verbal, leadership, Integrity and Communication skillsMust have ability to make decisions in time-sensitive situations The estimated base salary for this position ranges from $80,000.00 to $90,000.00 annually with additional management bonus eligibility. This range reflects various factors, including but not limited to the applicant's skills, qualifications, and previous work experience. Additionally, geographic differentials may apply based on the location where the position is ultimately filled, which could affect the final compensation. Benefits & Perks: 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. UniFirst is an international leader in garment & Uniform services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

PREVENTING ENVIRONMENTAL HARMWe go to extraordinary measures to protect our Airmen from environmental hazards and infractions. Applying engineering and scientific principles, Bioenvironmental Engineers identify and evaluate potential dangers and develop programs to prevent illness and injury. With an emphasis on discovering problems before they occur, these specialists ensure the health and safety of Airmen and their families in environments all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor of Science in engineering from an ABET-accredited institutionQualificationsCompletion of qualifying Bioenvironmental Engineering courseMinimum of 24 months of experience in bioenvironmental engineering assignmentsCompletion of Officer Training School courseMust be between the ages of 18 and have not reached your 42ndbirthday

Who we areWith its A.I.-powered robotic technology platform, Symbotic is changing the way consumer goods move through the supply chain. Intelligent software orchestrates advanced robots in a high-density, end-to-end system – reinventing warehouse automation for increased efficiency, speed and flexibility.What we needWe are looking for an Advanced Computer Vision Software Engineer to join our Safety Technologies Software Team. Your job will be to develop novel methods of robotic perception that meet real-world reliability requirements. You’ll use 3D camera data to help robots see the humans and workpieces they need to interact with and develop tools to visualize and interact with 3D scenes.What we doSymbotic is building safety-critical systems leveraging advanced computer vision, robotics, and 3D sensing that will transform warehouse automation. The Safety Technologies Software teamis tasked with developing a high-performance multiprocessor computer vision system, an embedded application that interfaces with industrial robots for safety controls and monitoring, as well as an intuitive engineering application which is used to design and configure the system.What you’ll doParticipate in the development of software solutions for vision applications including user interfaces, processing algorithms, mathematical modeling, machine learning.Develop highly reliable C++ and Python software to implement 3D vision algorithms such as registration, object classification and tracking, and 3D reconstructionParticipate in the hardware design of computer vision solutions, including:System design and componentselection (2D and 3D cameras, lighting system, lasers, etc.)Development of prototypesValidation of prototypes in our Vision Lab and in our Test CenterOn Site Support of our Vision SystemsDocumentation and preparation for productionPlanning and development of test benches for quality assuranceDevelop both internal and external tools to visualize, analyze and interact with 3D informationSupport for our actual Vision Systems on-siteWhat you’ll needBachelor's degree in Computer Engineering, Electrical Engineering, Computer Science, Physics or equivalent.Minimum 5 years of professional experience developing software applications.Strong experience with C++ and Python programming languagesStrong skills in programming and algorithm design and a strong desire to develop computer vision or computer graphicsKnowledge of image/signal processing techniques and/or machine learningRelevant experience in the development of computer vision systemsRelevant experience with robots (an asset)Comfortable following a structured software development process required for functional safety certification, including development of rigorous unit and systems testsOur EnvironmentUp to 10% travel may be required. Employees must have a valid driver’s license and the ability to drive and/or fly to client and other customer locations. The employee is responsible for owning a credit card and managing expenses personally to be reimbursed on a bi-weekly basis. #LI-Hybrid#LI-EJ1About SymboticSymbotic is an automation technology leader reimagining the supply chain with its end-to-end, AI-powered robotic and software platform. Symbotic reinvents the warehouse as a strategic asset for the world’s largest retail, wholesale, and food & beverage companies. Applying next-gen technology, high-density storage and machine learning to solve today's complex distribution challenges, Symbotic enables companies to move goods with unmatched speed, agility, accuracy and efficiency. As the backbone of commerce the Symbotic platform transforms the flow of goods and the economics of supply chain for its customers. For more information, visitwww.symbotic.com.We are a community of innovators, collaborators and pioneers who embrace our differences, because we know unique perspectives make us stronger and smarter. Every perspective matters. We depend on the collective voices of our employees, customers and community to help guide us as we build a better place to work – for you and the world. That’s why we’re proud to be an equal opportunity employer.We do not discriminate based on race, color, ethnicity, ancestry, religion, sex, national origin, sexual orientation, age, citizenship status, marital status, disability, gender identity, gender expression, veteran status, or genetic information.

This Systems Engineering Supervisor will be responsible for managing the planning, design and the installation of all Sortation Equipment by Systems Engineering. Direct on-site management will be required to ensure the success of concurrent projects. This position will work side by side with Systems Programming in the development of reliable equipment that provides the most effective cost/benefit to UniFirst Corporation. The Systems Design and Installation Supervisor will report directly to the Systems Engineering Manager. List the general responsibilities and descriptions of key tasks and their purpose, relationships with customers, coworkers, and others, and the results expected of incumbent employees. Responsibilities: Budgeting, Design and Planning Perform Plant assessments and provide system recommendations for approval.Assist in the Design of Systems that will improve plant productivity, efficiency and provide for regional growth.Maintain and provide accurate records or project spending.Develop transitional plans that will allow for system installation without major impact to plant operations or UniFirst Customers.Effectively communicate to Executive and Plant ManagementSystem prerequisitesLabor demand, quantity and quality.Equipment operation and the impact on production flow.Installation timeline.Transitional difficulties. Safety Maintain safe working environment during installation for both Contractors and Plant Employees.Install systems that comply with all applicable Local and National Safety Codes.Train and promote safety in the proper use and maintenance of installed equipment.Provide documentation for all installed equipment Installation Management Effectively schedule and utilize inside/outside contractors to complete project.Coordinate resources based on UniFirst Corporation priorities.Aggressively manage project costs, without sacrificing system safety or operational effectiveness.Communicate daily and weekly expectations to contactors.Provide accurate drawings and installation details.Reduce downtime by making sure all necessary parts are on hand.Provide critical decision making to resolve design and installation conflicts.Provide Hands On Mechanical/Electrical work and Supervision to UniFirst and contractor personnel during installation of systems.Continual Improvement-System design and installationQualificationsRequirements: Hold Mechanical/Technical degree, certification or equal “On the Job” experience.Minimum 2 years experience designing and managing projects in the Industrial Conveyor/Material Handling Field.Candidate must be willing to directly managing project installation.Report for work at local Branch/Plant when not on the road.Experience with AutoCAD to develop detailed mechanical layouts/ diagrams for conveyors, sorters, and storage equipment.Experience with MS Office, Word,Excel, MS Project.Must be a team player. He/She will be a part of an overall process where interaction with other employees is essential. The candidate must enjoy having a fluid interchange of ideas and recommendations from both Engineering and Plant Management.Strong training and presentation skillsMust have strong analytical skillsExcellent verbal, leadership, Integrity and Communication skillsMust have ability to make decisions in time-sensitive situations The estimated base salary for this position ranges from $80,000.00 to $90,000.00 annually with additional management bonus eligibility. This range reflects various factors, including but not limited to the applicant's skills, qualifications, and previous work experience. Additionally, geographic differentials may apply based on the location where the position is ultimately filled, which could affect the final compensation. Benefits & Perks: 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. UniFirst is an international leader in garment & Uniform services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

This Systems Engineering Supervisor will be responsible for managing the planning, design and the installation of all Sortation Equipment by Systems Engineering. Direct on-site management will be required to ensure the success of concurrent projects. This position will work side by side with Systems Programming in the development of reliable equipment that provides the most effective cost/benefit to UniFirst Corporation. The Systems Design and Installation Supervisor will report directly to the Systems Engineering Manager. List the general responsibilities and descriptions of key tasks and their purpose, relationships with customers, coworkers, and others, and the results expected of incumbent employees. Responsibilities: Budgeting, Design and Planning Perform Plant assessments and provide system recommendations for approval.Assist in the Design of Systems that will improve plant productivity, efficiency and provide for regional growth.Maintain and provide accurate records or project spending.Develop transitional plans that will allow for system installation without major impact to plant operations or UniFirst Customers.Effectively communicate to Executive and Plant ManagementSystem prerequisitesLabor demand, quantity and quality.Equipment operation and the impact on production flow.Installation timeline.Transitional difficulties. Safety Maintain safe working environment during installation for both Contractors and Plant Employees.Install systems that comply with all applicable Local and National Safety Codes.Train and promote safety in the proper use and maintenance of installed equipment.Provide documentation for all installed equipment Installation Management Effectively schedule and utilize inside/outside contractors to complete project.Coordinate resources based on UniFirst Corporation priorities.Aggressively manage project costs, without sacrificing system safety or operational effectiveness.Communicate daily and weekly expectations to contactors.Provide accurate drawings and installation details.Reduce downtime by making sure all necessary parts are on hand.Provide critical decision making to resolve design and installation conflicts.Provide Hands On Mechanical/Electrical work and Supervision to UniFirst and contractor personnel during installation of systems.Continual Improvement-System design and installationQualificationsRequirements: Hold Mechanical/Technical degree, certification or equal “On the Job” experience.Minimum 2 years experience designing and managing projects in the Industrial Conveyor/Material Handling Field.Candidate must be willing to directly managing project installation.Report for work at local Branch/Plant when not on the road.Experience with AutoCAD to develop detailed mechanical layouts/ diagrams for conveyors, sorters, and storage equipment.Experience with MS Office, Word,Excel, MS Project.Must be a team player. He/She will be a part of an overall process where interaction with other employees is essential. The candidate must enjoy having a fluid interchange of ideas and recommendations from both Engineering and Plant Management.Strong training and presentation skillsMust have strong analytical skillsExcellent verbal, leadership, Integrity and Communication skillsMust have ability to make decisions in time-sensitive situations The estimated base salary for this position ranges from $80,000.00 to $90,000.00 annually with additional management bonus eligibility. This range reflects various factors, including but not limited to the applicant's skills, qualifications, and previous work experience. Additionally, geographic differentials may apply based on the location where the position is ultimately filled, which could affect the final compensation. Benefits & Perks: 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. UniFirst is an international leader in garment & Uniform services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Information Security is crucial at UniFirst and is part of a broader Information Governance, Risk, and Compliance program within IT. The Senior Information Security Engineer will be a key factor in leveraging the current implemented security technologies and enhancing related processes and procedures. The Senior Information Security Engineer is responsible for discovering, evaluating, and delivering security technologies to protect all sensitive information. The Senior Information Security Engineer will provide technical knowledge and analysis to include applications, operating systems, vendor risk management, incident response and security awareness and training. Responsibilities: Contribute to the implementation of UniFirst’s security controls environmentProvide consultation for configuration of technologies managed by IT InfrastructureMaintain and continuously improve the security incident response planHelping with the resolution of security incidents and determining root causeEstablish baselines and monitor/report on trends and anomaliesActs as a principal resource for escalated security incidents and responseWork together with all teams to fine-tune infrastructure/application/database protection and provide input for secure software developmentConduct examinations of system logs, applications, and networks security eventsSupport IT Operations Control Center teamProviding security support for application and infrastructure related projectsConducting Security Risk Assessments on new and existing technologiesPartner in the vulnerability management programWill be a critical partner in driving an improved overall security postureQualificationsRequirements: Bachelor’s degree in Computer ScienceInformation Systems, or related discipline preferred or equivalent job experienceCISSP certification(s) preferred.Must have 5+ years of experience as a Security EngineerFamiliar with security related frameworks including CIS18, NIST and PCIExperience with Incident Management programsExperience in intrusion detection and analysisKnowledge of SPLUNK, Nessus, Email gateway, O365, and Palo Alto technologiesExperience monitoring, investigating, and solving IT security related concernsStrong interpersonal skills including strong written and oral communication skillsExperience with building & managing user awareness training programsAbility to multi-task and balance priorities Benefits & Perks: 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. UniFirst is an international leader in garment & Uniform services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

This position will be responsible for directly overseeing installation and repairs of the Wastewater Systems and equipment as well as audit and improve operations at locations. This position will also be required to learn how to design and suggest system layouts based on plant needs. This position will handle all personnel and material logistics necessary to complete the project. Personal “hands-on” labor will be required to assist and expedite mechanical and electrical repairs. The Project Tech will report directly to the Systems Engineering Director as well as the Environmental System Supervisor. Responsibilities: Effectively schedule and utilize inside/outside contractors to complete project assigned.Coordinate resources based on UniFirst Corporation priorities.Identify deficient equipment both mechanical and electrical. Order parts needed for repairs and with the help of the location staff make needed repairsCommunicate with location on what repairs are needed and how to prevent failures in the system.Provide accurate prints of system layout, P&ID and electrical changes made when repairing system.Reduce downtime by making sure all necessary parts are on hand.Provide critical decision making to resolve design and installation conflicts.Provide Hands On Mechanical/Electrical work and Supervision to UniFirst and contractor personnel during installation of wastewater systems.Continual Improvement-System design and installationQualificationsRequirements: Hold Mechanical/Technical degree, certification or equal “On the Job” experience.Minimum 2 years experience in the Industrial Environmental Field.Experience with MS Office, Word,Excel, MS Project.Experience or ability to learn AutoCAD to develop detailed mechanical layouts/ diagrams for WW Facilty layouts to include equipment placement, piping and electrical layouts.Experience with Electrical systems to include 460V, 240/208V, 120V as well as 24VDCExperience with mechanical systems, including Pumps, Mixers and Piping systems.Candidate must be willing to travel up to 70%, directly managing project installation.Work a 10 day ON-4 day OFF schedule when necessary to manage project installation.Must be a team player. He/She will be a part of an overall process where interaction with other employees is essential. The candidate must enjoy having a fluid interchange of ideas and recommendations from both Engineering and Plant ManagementMaintain safe working environment during installation for both Contractors and Plant Employees. The estimated salary for this position ranges from $80,000.00 to $90,000.00 annually. This range reflects various factors, including but not limited to the applicant's skills, qualifications, and previous work experience. Additionally, geographic differentials may apply based on the location where the position is ultimately filled, which could affect the final compensation. Benefits & Perks: 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. UniFirst is an international leader in garment & Uniform services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws