Middletown, CT • (40.6 miles) • Full Time • 10/2/2026

Woodard & Curran is an employee-owned engineering, science, and operations firm dedicated to clean water, a safe environment, healthy communities, and happy people. We foster an inclusive, collaborative culture that supports professional growth, flexibility, and meaningful work, empowering our employees to make a lasting impact on our clients, communities, and the planet.What’s in it for you:This position offers the chance to drive and grow remediation engineering services for a well-established, privately held, national environmental engineering and science firm. You’ll collaborate with some of the industry’s leading technical experts to provide innovative solutions on various complex projects. The role also includes increased leadership opportunities through higher visibility in the mark

Springfield, MA 01103 • (5.4 miles) • Full Time • 10/2/2026

You will be a member of our mechanical department and your responsibilities will include, but not be limited to:ResponsibilitiesMay work independently or with other ME’s, depending on project sizeExecute all tasks necessary to complete the engineering on a project from conceptual design through executionPerform heating and cooling load calculationsPerform mass energy balance calculationsPerform drainage and line loss calculationsEquipment sizing and selectionDevelop Mechanical / Utility equipment and construction specificationsDevelop P&ID’s, equipment layout plans, plant / process utility piping (steam, hydronic, CA) distribution plans, andsystem detailsP&ID design & draftingSize and develop layouts for ductwork and piping plansControls functional description developmentCreate equipment s

Rocky Hill, CT 06067 • (33.3 miles) • Full Time • 9/27/2026

Office Engineer – Transportation Construction Location: Rocky Hill, CT | Full-Time | On-SiteSalary Range: $110,000 – $150,000 + BenefitsAbout Garg Consulting Services, Inc.Garg Consulting Services, Inc. (Garg) is a leading multidisciplinary engineering and construction management firm specializing in transportation infrastructure, roadway design, and DOT projects throughout the Northeast. We are currently seeking a highly skilled Office Engineer to support major transportation construction projects in Connecticut.Position OverviewThe Office Engineer will provide project documentation, reporting, and coordination support for transportation construction projects in Connecticut.Key ResponsibilitiesManage construction documentation: RFIs, RFCs, submittals, drawings, contracts, and corresponden

Windsor, CT 06095 • (19.7 miles) • Full Time • 9/25/2026

*Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time.*Job Title: Fly-By-Wire & Secondary Control System EngineerJob Location: Wichita, KSWhat are your contributions to the team?Perform the integration of the FBW & Secondary Flight Controls system on the aircraft.Support the development of concepts, design approach and philosophy with the Flight Control system supplier.Perform/Review analysis to evaluate concepts feasibility.Develop, validate and verify technical requirements of the Flight Control System.Review/Prepare technical requirementsReview/Prepare test proceduresExecute test rig and/or aircraft testingReview/Prepare test reports in support of certification activitiesResolve problems a

East Hartford, CT 06108 • (24.5 miles) • Full Time • 9/25/2026

Company Description CS Group USA, a subsidiary of CS Group, is a key player in the development and certification of safety-critical systems in the aerospace industry in the United States.Joining CS Group USA is a unique opportunity to work on complex high-tech systems for the most prestigious aerospace manufacturers in the country. Our team operates primarily remotely, with employees based across multiple U.S. states, offering flexibility while staying closely connected. We offer competitive compensation, comprehensive benefits, and a collaborative environment that fosters skill development and active involvement in the company’s growth.Job Description Position OverviewWe are seeking an experienced FPGA Development Engineer with experience in real-time embedded systems development to lead

Manchester, CT 06042 • (22.5 miles) • Full Time • 9/24/2026

Position SummaryApplied Aerospace & Defense, formerly PCX, is seeking an experienced and hands-on Engineering Manager to lead our engineering organization in a demanding aerospace manufacturing environment. This role is ideal for an engineering leader with a strong background in traditional machining, aerospace manufacturing processes, and manufacturing engineering who enjoys solving complex problems and developing people.The Engineering Manager will provide technical leadership across engineering and manufacturing, working closely with Operations, Quality, Supply Chain, and Program Management to improve manufacturing performance, resolve technical challenges, and support the successful launch and production of aerospace components.The successful candidate will combine strong technical exp

Springfield, MA 01104 • (4.2 miles) • Full Time • 9/24/2026

Company Description Titeflex/US Hose is a global leader in creating and adapting fluid and gas management products and quality programs, Titeflex expertise can be traced to its aerospace roots at the dawning of the space age. We provided solutions and service for demanding fluid and gas transfer requirements, whether the media be corrosive, caustic or combustible, under extreme pressure, temperature and flexing conditions. Primary markets include aerospace, chemical, petro-chemical, pulp and paper, petroleum equipment, heavy equipment, compressed gas, automotive, refrigeration, transportation, and dozens of other niche markets. The company has a long history of expertise in PTFE extrusion and wire braid reinforcement, and composite hose as the new integration of flexible metal hose with th

Hartford, CT • (26.5 miles) • Full Time • 9/24/2026

DescriptionCreativity. Innovation. A desire to effect positive change. That’s what it takes to work at Fuss & O’Neill – because that’s what we do for the communities in which we work: we create, innovate, and design long-lasting improvements that improve quality of life. Quality of life is also important on the job, so we’ve prioritized work-life balance by offering flexible/remote work opportunities, part-time benefits, and generous PTO. We believe that each day is an opportunity to support one another, to support our clients, and to support our communities. If you feel the same, then you’ve found your future.Fuss & O’Neill is looking for an Environmental Process Engineer to join our growing Environmental Compliance team. This role offers the opportunity to combine engineering design, env

Windsor, CT 06006 • (20.1 miles) • Full Time • 9/23/2026

A multi-discipline architectural, engineering, and environmental consulting firm is seeking a Senior Forensics Engineer for their growing office in Windsor! Responsibilities: Conduct residential and commercial forensic investigations to analyze/determine structural damage for insurance companies, attorneys, private homeowners and property ownersInvestigate and assess damage due to catastrophesProve evaluations are correct by researching technical publications and literatureApply engineering principles and practices in accordance with codes and industry standardsProvide client with detailed forensic engineering reports outlining cause and origin of damageManage multiple projects and meet project deadlinesProvide clients and team with timelines and project updatesExperience:Bachelor’s Degre

Suffield, CT 06078 • (12.3 miles) • Full Time • 9/20/2026

Genset Mechanical Integration Engineer – LiquidPistonLocation: This position is fully onsite in Bloomfield, CT, five days per week, with the company relocating to Suffield, CT later in 2026. Position Summary: LiquidPiston is seeking a Genset Mechanical Integration Engineer to lead the mechanical integration and packaging of electrical and electromechanical systems within our next-generation rotary engine-powered generator platforms. This role is ideal for a mechanical engineer with experience designing around electrical hardware, including packaging high-voltage or low-voltage electrical components, power electronics, wiring, harness routing, battery systems, and electromechanical assemblies. You'll own the mechanical integration of these systems into compact, high-performance engine and g

West Torrington, CT 06790 • (38.3 miles) • Full Time • 9/20/2026

We are only accepting applications through verified recruitment websites listing our job postings (i.e. LinkedIn, Workable, Indeed, etc). Dymax will only contact potential candidates from email addresses in @dymax.com.About UsDymax, part of the Bachmann Chemical & Engineering family of brands is based out of Torrington, Connecticut. Dymax is globally recognized as a pioneer in the development of light-curable adhesives and curing equipment. Today, our expansive portfolio of innovative adhesives, coatings, and maskants are supported by dispense solutions and cutting-edge UV and LED light-curing equipment. Unlike our competitors who supplying standard products, Dymax focuses on the customer experience by tailoring solutions that help customers lower costs, reduce their carbon footprint, impr

Glastonbury, CT 06033 • (28.8 miles) • Full Time • 9/17/2026

AtMcFarland Johnson(MJ),you’ll own your future. We're a100% employee-owned firmwith 80 years of experience delivering innovative engineering, planning, environmental, technology and construction solutions that make a lasting impact on the clients and communities we serve.Certified as aGreat Place to Work, our employee-owners describe MJ's culture as collaborative, people-focused, and supportive.Join us, and help shape the future of infrastructure, together.About the Role: We are seeking an experiencedProjectEngineertojoin our growing Aviation division in Glastonbury, CT.Why Join MJ?Career Growth: Accelerate your professional career with opportunities to lead, learn, and expand your expertise.Collaborative Culture: Work alongside multidisciplinary teams that thrive on creativity, support, a

New Britain, CT 06051 • (34.7 miles) • Full Time • 9/17/2026

Enjet Aero machines and fabricates complex jet engine parts, components and assemblies for leading OEMs in the commercial, defense and general aviation sectors. Our goal is to be regarded as an irreplaceable resource by our customers. The only way for a company to meet such a goal is to consistently meet production deadlines and expectations.Your work has a destination! Enjoy competitive pay, excellent benefits, a company profit sharing bonus plan, and more while building precision aerospace components that help aircraft fly safely around the world. Join a growing, industry-leading aerospace manufacturer where your work makes an impact and your career can take off.Position Description: CNC Programmer is responsible for determining methodology and designs behind producing parts, writing cod

Windsor Locks, CT 06096 • (15.9 miles) • Full Time • 9/14/2026

First Article Inspection/Quality EngineerWindsor Locks, CT, USAWhat You Will Do:Prepare theFirst Article Inspectionutilizing software such asDISCUSto balloon the drawing and compile theAS9102Cpackage to release manufacturing to record the actuals associated with this process, gathering all the necessary information required to include in the FAIR package.Deliver theFirst Article Inspectionpackage to manufacturing to record and verify what’s called out on the engineering drawing.Compile the actuals and populate them using ballooning software to compile theAS9102C(Forms 1,2, and 3) and create theFirst Article InspectionReports (FAIRs).Import theFirst Article InspectionPackage toNet InspectNotify manufacturing and quality of the recorded non-conformances, ensuring that the necessary actions h

Willimantic, CT 06226 • (32 miles) • Full Time • 9/10/2026

Prysmian is the world leader in the energy and telecom cable systems industry. Each year, the company manufactures thousands of miles of underground and submarine cables and systems for power transmission and distribution, as well as medium low voltage cables for the construction and infrastructure sectors. We also produce a comprehensive range of optical fibers, copper cables and connectivity for voice, video and data transmission for the telecommunication sector.We are 30,000 employees across 50+ countries. Everyone at Prysmian has the potential to make their mark; because whatever you do, wherever you are based, you will be part of a company that is helping transform the world around us.The R&D Laboratory Engineer will own product testing in support of product development including equi

Berlin, CT 06037 • (38.2 miles) • Full Time • 9/10/2026

Join our team in Berlin, CT!!Summary of Position:Reporting to the Engineering Manager, this position will have direct responsibility for developing and implementing robust cost-effective manufacturing processes and methods, recommends and improvements to sustained production processes, methods, and controls, as well as coordinate the launch of new products into volume production. TOMZ manufactures parts via high precision metal machining, finishing, assembly, and anodize processes for Medical Devices.Essential Functions:Support Production in reducing / eliminating equipment and tooling downtime or scrap.Perform tool life studies to drive efficiency and cost savings opportunities.Conduct Process Capability studies during manufacturing processes to support achieving objectives.Collaborates w

Newington, CT 06111 • (32.5 miles) • Full Time • 9/8/2026

Job Title: Engineering TechExempt Status: Non-ExemptLocation: Newington, CTCompany Description:Hanwha Aerospace USA has long been recognized as a leader in the development and supply of flight critical Aerospace/Defense components and assemblies. Operating out of four state-of-the-art facilities located in Connecticut, Hanwha Aerospace USA offers growth and career development opportunities to enrich your talents.Summary:Position that acts as a intermediary between the Programming team and Shop Floor operations to troubleshoot and deploy programming changes. Will assist with the setup and running of 1st pieces on the shop floor with operator when a programming change has been made. 20% of the job will be Programming training with the goal of becoming a Junior CMM Programmer once proficient.

Rocky Hill, CT 06067 • (33.3 miles) • Full Time • 9/5/2026

Weston & Sampson is seeking a motivated, proactive individual to work within our growing electrical group as an Electrical Engineer. The ideal candidate will have experience in the design and construction administration working in a multi-disciplinary professional engineering firm involved in the production of contract documents. This individual will support our growing internal and external clients serving the educational, commercial, water, wastewater and municipal industries. A solid understanding of power distribution, lighting, fire alarm, emergency power generation and the NEC is required.What you’ll do:Perform engineering and design for both new and renovation projects for a variety of facility types within the public, private and municipal sectors.Responsibilities will include prod

Worcester, MA 01604 • (37.9 miles) • Full Time • 9/30/2026

Description: Launch your career with one of the region’s premier consulting engineering firms. BETA Group, Inc. is seeking a detail-oriented and motivated Transportation Engineering Designer to join our dynamic and growing team. This is an exciting opportunity to work alongside experienced engineers, planners, scientists, and technical professionals on a wide range of impactful infrastructure projects. This individual will be an integral member of the design team, working on the development of transportation infrastructure projects such as highways, intersections, traffic signals, signage, and pedestrian/bicycle facilities. This role bridges technical drafting, traffic analysis, design development, and project documentation.Responsibilities:Assist in the design and development of roadway a

Worcester, MA • (36.3 miles) • Full Time • 9/16/2026

Company Description About AbbVieAbbVie's mission is to discover and deliver innovative medicines and solutions that solve serious health issues today and address the medical challenges of tomorrow. We strive to have a remarkable impact on people's lives across several key therapeutic areas including immunology, oncology and neuroscience - and products and services in our Allergan Aesthetics portfolio. For more information about AbbVie, please visit us atwww.abbvie.com. Follow @abbvie onLinkedIn,Facebook,Instagram,XandYouTube.Job Description The Global Biologics upstream and downstream Process Engineer will support the AbbVie Technical Operations Functions and the AbbVie Technical Centers worldwide. This position, working with little or no supervision, will be responsible for applying advan

Springfield, MA 01103 • (5.4 miles) • Full Time • 10/2/2026

Job SummaryDennis Group’s Process Engineers are key in our projects of designing and building food and beverage processing facilities. Process Engineers work in every aspect of a project - controls, packaging, mechanical, electrical, building system, architecture, etc., from the conceptual stages to design completion, and throughout construction. They provide expertise in flow diagrams, alterations, constraints, piping and instrumentation diagrams (P&ID), layout, install, and commissioning and start-up. Process engineers enable operational efficiencies for the food and beverage process plants of our clients. Responsibilities will include, but not be limited to:ResponsibilitiesExecute all tasks necessary to complete the engineering on a project for design through execution with minimal supp

Windsor, CT 06095 • (19.7 miles) • Full Time • 9/25/2026

"We are unable to sponsor or take over sponsorship of an employment visa at this time."Job Title : Technical Expert, Engineering, Flight Control Laws Design, DevelopmentJob Location : Any of below location• Montreal or Toronto (Canada) or• Wichita (USA) or• Hartford (USA) or• Dallas (USA) or• Opa Locka (Florida, USA) or• Tucson (USA)What are your contributions to the team?• Develop and improve both new and existing CLaws design as well the corresponding assessment tools using Matlab and C++ programming• Support CLaws, autopilot, and navigation design development for R&D projects• Develop CLaws and systems requirements• Perform CLaws requirements validation and verification (V&V) for any Claws updates and/or new Claws designs• Verify and deliver the CLaws in accordance with the DO-178B stan

East Hartford, CT 06108 • (24.5 miles) • Full Time • 9/25/2026

Company Description CS Group USA, a subsidiary of CS Group, is a key player in the development and certification of safety-critical systems in the aerospace industry in the United States.Joining CS Group USA is a unique opportunity to work on complex high-tech systems for the most prestigious aerospace manufacturers in the country. Our team operates primarily remotely, with employees based across multiple U.S. states, offering flexibility while staying closely connected. We offer competitive compensation, comprehensive benefits, and a collaborative environment that fosters skill development and active involvement in the company’s growth.Job Description We are seeking a capable Embedded Software Verification Engineer with experience in real-time embedded software verification.The ideal cand

Manchester, CT 06042 • (22.5 miles) • Full Time • 9/24/2026

ACCOUNTABILITY:Responsible for the engineering ownership of the manufacturing process for a variety of flight critical aerospace components, requiring integrity in the exercise of judgement and application of standard engineering principles and practices.TYPICAL DUTIES:Prepare detailed manufacturing plans for the production of aerospace components in accordance with customer drawings, parts lists and specifications. Previous experience with Frozen Planning and manufacturing flight critical components preferred.Create accurate CAD models and dimensioned operation sheets using GD&T principles in support of this manufacturing planning effort.Provide technical troubleshooting support for machining operations (milling, turning, grinding), special processing (heat treat, polishing/deburring, sho

Springfield, MA 01104 • (4.2 miles) • Full Time • 9/24/2026

Company Description Overview:The internship position is an opportunity for an Engineering student to gain real world and hands on experience in a manufacturing environment, while concurrently providing benefit to STS Aerospace. The purpose of this internship, is to study Braid Wire and Advance Braid Design Theory with the goal of revising current engineering calculations to better predict hose performance.Job Description Qualification/Requirements:Graduate student, Senior, or Junior in Mechanical Engineering or Material Science.Strong academic / analytical modeling.Able to develop mathematical theory validated with actual test results.Strong programing, Excel or Google Sheets background.Strong Material Science knowledgePreferred Skills:MATLAB, Python, Statistical and Data AnalysisQualifica

Hartford, CT • (26.5 miles) • Full Time • 9/24/2026

DescriptionCreativity. Innovation. A desire to effect positive change. That’s what it takes to work at Fuss & O’Neill – because that’s what we do for the communities in which we work: we create, innovate, and design long-lasting improvements that improve quality of life. Quality of life is also important on the job, so we’ve prioritized work-life balance by offering flexible/remote work opportunities, part-time benefits, and generous PTO. We believe that each day is an opportunity to support one another, to support our clients, and to support our communities. If you feel the same, then you’ve found your future.We are seeking a Senior Mechanical Engineer to join our growing building systems team and play a key role in the planning, design, and delivery of complex mechanical systems for a di

Windsor, CT 06006 • (20.1 miles) • Full Time • 9/23/2026

Multi-discipline engineering firm in business for decades is looking for an Electrical Discipline Engineer for their Windsor office! Job Responsibilities:Design electrical systems such as lighting, power distribution, stand-by power generation, communication, fire alarm and security systemsManage a group of Electrical Engineers in project design and development tasks such as drawings, calculations, cost estimates, and specificationsRespond to client questions and commentsReview contractor submittals and provide clarifications during constructionReview electrical department design documents for completionEnsure department personnel adhere to accepted industry and company standardsAssist in the development of company quality standards and proceduresWork closely with management and electrica

Rocky Hill, CT 06067 • (33.3 miles) • Full Time • 9/17/2026

Electrical Engineer (Transportation/Transit - Lighting & Facility Power)Location: Rocky Hill, CTEmployment Type: Full-Time | On-SiteSalary: $115,000–$145,000 annually, commensurate with experience, plus a signing bonus and comprehensive benefits.About Garg Consulting Services, Inc.Garg Consulting Services, Inc. is a multi-disciplinary engineering firm specializing in railroad and transit infrastructure projects throughout the Northeast. Founded in 1990, Garg employs over 100 professionals and delivers high-profile federal and state transportation projects across Connecticut, New York, New Jersey, and Pennsylvania. We are seeking an experienced Electrical Engineer to support complex electrical engineering design efforts and support large-scale transportation and infrastructure programs.Posi

New Britain, CT 06051 • (34.7 miles) • Full Time • 9/16/2026

Enjet Aero machines and fabricates complex jet engine parts, components and assemblies for leading OEMs in the commercial, defense and general aviation sectors. Our goal is to be regarded as an irreplaceable resource by our customers. The only way for a company to meet such a goal is to consistently meet production deadlines and expectations.Your work has a destination! Enjoy competitive pay, excellent benefits, a company profit sharing bonus plan, and more while building precision aerospace components that help aircraft fly safely around the world. Join a growing, industry-leading aerospace manufacturer where your work makes an impact and your career can take off.Position Description: Manufacturing & Process Engineer is responsible for determining methodology and designs behind producing

Suffield, CT 06078 • (12.3 miles) • Full Time • 9/15/2026

LiquidPiston This role is fully onsite in Bloomfield, CT, five days per week, and the company will be relocating to Suffield, CT later in 2026. About LiquidPistonLiquidPiston (LPI) is revolutionizing the internal combustion engine. Our patented High Efficiency Hybrid Cycle (HEHC) and rotary X-engine platform enable compact, ultra-efficient, and power-dense engines for hybrid, aerospace, and power generation applications. We are a mission-driven team of innovators determined to push the boundaries of energy and propulsion.Position Overview We are seeking talented and motivated Engine Design Engineers to join our growing team. In this role, you will be at the forefront of developing groundbreaking engine systems and componentsfrom initial concept through prototyping, validation, and producti

Windsor Locks, CT 06096 • (15.9 miles) • Full Time • 9/14/2026

Quality EngineerWindsor Locks, CT, USAFull-TimeWhat You will Do:Develop detailed inspection plans for aerospace components and assemblies, ensuring compliance with customer requirements, engineering specifications, and regulatory standardsCollaborate with design and engineering teams to define the most appropriate inspection methods and criteria for new parts, assemblies, and systemsIdentify and select suitableinspection tools, techniques, and measurement equipment (Vernier, micrometer, radius optical, gaging, etc.)Establish acceptance criteria, and tolerances for aerospace products based on engineering drawings, material specifications, and industry standardsCreate and maintain detailed inspection reports, documentation, and records, ensuring that all inspection activities are traceable a

West Torrington, CT 06790 • (38.3 miles) • Full Time • 9/5/2026

We are only accepting applications through verified recruitment websites listing our job postings (i.e. LinkedIn, Workable, Indeed, etc). Dymax will only contact potential candidates from email addresses in @dymax.com.About UsDymax, part of the Bachmann Chemical & Engineering family of brands is based out of Torrington, Connecticut. Dymax is globally recognized as a pioneer in the development of light-curable adhesives and curing equipment. Today, our expansive portfolio of innovative adhesives, coatings, and maskants are supported by dispense solutions and cutting-edge UV and LED light-curing equipment. Unlike our competitors who supplying standard products, Dymax focuses on the customer experience by tailoring solutions that help customers lower costs, reduce their carbon footprint, impr

Worcester, MA 01604 • (37.9 miles) • Full Time • 9/15/2026

Description: As a recognized leader in engineering, planning, and design services, BETA Group, Inc delivers transformative transportation solutions across the Northeast. With a legacy of technical excellence, innovation, and integrity, we are proud of the communities that we help build in meaningful, sustainable ways. We are seeking to add a detail-oriented and experienced Senior Transportation Project Engineer to join our growing team.As a Senior Transportation Project Engineer, you’ll play a key role in delivering complex, multidisciplinary infrastructure projects. You’ll have the opportunity to oversee every phase, from conceptual planning to final design and construction support. The ideal candidate will have a strong background in civil and highway engineering, familiarity with DOT st

Worcester, MA • (36.3 miles) • Full Time • 9/7/2026

Company Description About AbbVieAbbVie's mission is to discover and deliver innovative medicines and solutions that solve serious health issues today and address the medical challenges of tomorrow. We strive to have a remarkable impact on people's lives across several key therapeutic areas including immunology, oncology and neuroscience - and products and services in our Allergan Aesthetics portfolio. For more information about AbbVie, please visit us atwww.abbvie.com. Follow @abbvie onLinkedIn,Facebook,Instagram,XandYouTube.Job Description AbbVie Bioresearch Center in Worcester, MA is seeking a Senior Facilities Engineer to join the Facilities Engineering group. The Senior Facilities Engineer will play a key role in helping ensure safe, reliable, compliant, and efficient facility operatio

Springfield, MA 01103 • (5.4 miles) • Full Time • 10/1/2026

His/her specific responsibilities will include, but not limited to:ResponsibilitiesDesigning electrical systems for buildingpower, i.e. normal, emergency, and standby power distribution systems for 208v, 480v, and medium voltage for industrial facilities.Execute duties on larger projects independentlyClient contact and lead engineerDocumenting all necessary calculations for the design such as short circuit, selective coordination, arc flash, generator sizing, steady state and transient voltage drops, load calculations, conductor sizing, raceway fills, etc.Maintains project document organizationManage time and meet commitmentsUnderstands Ohms Law, AC/DC, Electric and magnetic fieldsUnderstands power system theory – 3-phase vector math, power factor, symmetrical componentsUnderstands capacit

Windsor, CT 06095 • (19.7 miles) • Full Time • 9/25/2026

"We are unable to sponsor or take over sponsorship of an employment visa at this time."Job Title: Professional Engineering - Electrical Systems IntegrationJob Location: Any of below location• Wichita (USA)• Hartford (USA)• Dallas (USA)• Opa Locka (Florida, USA)• Tucson (USA)What are your contributions to the team?In your role, you will be supported by the electrical systems manager as a Professional – Engineering – Electrical Systems Integration in a multifaceted position within the Functional Engineering Team. At customer end, the Electrical System Integration team is responsible to develop, certify, improve, and maintain the best industry standards for the Electrical Power Generation & Distribution systems and lighting systems architectures on our airplanes. In this role, you will:• Part

South Windsor, CT 06074 • (20.2 miles) • Full Time • 9/24/2026

We are seeking an experienced Site Design Engineer to design and optimize site layouts for the installation of fuel cell systems in various environments, with a strong focus on creating layouts for new customers. This role requires a deep understanding of construction standards, the ability to collaborate effectively with top Civil Eng. firms, and the expertise to reduce installation costs through innovative construction methods and strategies. You will work closely with clients to ensure their specific needs are met while developing cost-effective, code-compliant site layouts that facilitate efficient fuel cell system integration.Key Responsibilities:Site Layout Design for Fuel Cell Systems:Develop and design site layouts for the installation of fuel cell systems for new customers, includ

Manchester, CT 06042 • (22.5 miles) • Full Time • 9/24/2026

The CMM Programmer is responsible for programming, proving out and supporting coordinate measuring machine (CMM) inspections on critical aerospace components in accordance with customer and internal specifications. This role will independently execute CMM programs to communicated NPI and daily production milestones. Programming capability (MCOSMOS) is required for this role. Programming capability (Calypso and/or Modus) is highly desirable. The programmer will interface closely with quality, engineering, production, and manufacturing support teams to ensure timely inspection flow and accurate data collection.The CMM Programmer is responsible for generating and proving out CMM programs for Mitutoyo, Zeiss, and Metris CMMs to perform dimensional inspections on aerospace components. This incl

Hartford, CT • (26.5 miles) • Full Time • 9/24/2026

DescriptionCreativity. Innovation. A desire to effect positive change. That’s what it takes to work at Fuss & O’Neill – because that’s what we do for the communities in which we work: we create, innovate, and design long-lasting improvements that improve quality of life. Quality of life is also important on the job, so we’ve prioritized work-life balance by offering flexible/remote work opportunities, part-time benefits, and generous PTO. We believe that each day is an opportunity to support one another, to support our clients, and to support our communities. If you feel the same, then you’ve found your future.The Structural department is looking for a civil engineering intern to help work on various projects predominately focused on vertical structural design.Our internship program is a 1

Windsor, CT 06006 • (20.1 miles) • Full Time • 9/23/2026

A multi-discipline consulting firm is seeking a Project Water/Wastewater Engineer for their growing team in Windsor, Connecticut! Responsibilities: Perform various engineering tasks including wastewater collection, conveyance, and treatment processesLead engineering evaluationsPrepare design calculations, reports, plans and specificationsPerform construction administrative tasks (construction phase management activities, coordinate shop drawing reviews, RFI responses, develop construction change orders)Communicate directly with clientsConfirm accuracy of plans/specificationsPerform field activities (site investigations, witness testing and milestone construction observation)Supervise/manage junior staffAssist with business development (write technical proposals/assist with budgeting)Lead p

Rocky Hill, CT 06067 • (33.3 miles) • Full Time • 9/17/2026

Entry-Level Engineer (Civil, Electrical, Mechanical, Construction)Locations: Rocky Hill, CT and Woodbridge, NJFull-TimeCompensation: $35-42/hourAre you ready to launch your engineering career with a dynamic and supportive team? GargConsulting Services, Inc., a multi-disciplinary engineering firm headquartered in Rocky Hill, CT, with a second office in Woodbridge, NJ, is seeking Entry-Level Engineers to join our growing team!We are actively hiring recent or upcoming graduates in Civil, Electrical, Mechanical and Construction Engineering to support a variety of infrastructure projects throughout the Northeast.About Us:Garg Consulting Services, Inc. (Garg) is a multi-disciplinary engineering firm advancing the future of transportation infrastructure across the Northeast. With over 100 employe