Corewell Health Proton Therapy Center is equipped with a state-of-art compact single room system, IBA ProtesuONE which is the second of its kind in the world. Recently, with the research and development, it is now upgraded to the DynamicARC system, first one in the world (FDA pending). The proton physicist will gain the experience from all the aspect of validation, commission and clinical operation of the DynamicARC system. Additionally, the proton staff physicist will have opportunities to participate world-class research projects in the proton therapy center including but not limited to the proton adaptive therapy, optimization algorithm development, motion management and exploring the clinical benefit of novel treatment techniques.GENERAL SUMMARY:The Staff Physicist works within the Department of Radiation Oncology. They report to the Chief of Physics and work under the guidance of the Director of Clinical Physics and Medical Physicist Ld. They perform and review all aspects of radiotherapy patient and equipment related planning and quality assurance. The primary responsibility of the Staff Physicist is to assure the best possible treatment is provided to the patients in Radiation Oncology. The Staff Physicist in Radiation Oncology responsibilities will include clinical service, research/development and education/training based on the assignments from the Chief of Physics and Director of Clinical Physics.STANDARD QUALIFICATIONSTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties.Education / Training: Master’s degree or PhD degree in physics, medical physics or related field or Doctorate of Medical Physics or demonstrated equivalency through experience as well as being listed as an Authorized Medical Physicist (AMP) on a Nuclear Regulatory License (NRC). Work Experience: Completion of a CAMPEP approved Medical Physics residency program in Radiation Oncology or 1 – 2 years’ experience in a related field desirable.Certification, Licensure, Registration: Certification in therapeutic medical physics (or therapeutic radiological physics or radiological physics) by either:American Board of Radiology.American Board of Medial Physics. Or must complete certification within three years of hire or must be classified as an AMP by the NRC.Other Qualifications: None.ESSENTIAL DUTIES:Clinical Service, Technical Management and ConsultationManage and monitor clinical treatment process, procedure and staff performing daily calibrations for all therapy and imaging equipment, and radioactive sources.Manage and perform acceptance testing, commissioning and routine QA of all radiotherapy equipment, imaging equipment, and planning system according to the recommendations of AAPM task group reports, industry standards, federal and state regulations.Assist the development of, and ensure staff adherence to all medical physics and dosimetry QA procedures and policies.Provide consultation with radiation oncologists on the physical and radiobiological aspects of patients’ treatments and the development of treatment plans and treatment protocols.Ensure the accuracy/appropriateness of computerized patient treatment plans performed by dosimetry staff and work in consultation with the physicians to achieve optimal care.Perform and guide dosimetry staff with patient-specific radiation measurements and calculations and assist the development/selection and specifications of any complex devices required to direct/protect critical normal tissues.Manage and perform the measurement and analysis of data used for treatment planning computer software and tests new versions of software prior to use.Development of acquisition and storage of data for treatment plans, treatment verification and evaluations.Assurance of the accuracy of dose delivery, patient position, treatment unit parameters and settings used for a patient’s treatment: including correct transfer of parameters between the CT, CBCT, CT/PET, MRI, US, treatment planning system and the treatment unit along with periodic review of each patient’s chart.Assist radiation oncologists in credentialing and supporting clinical trials. Responsible for specific QA of clinical trials and protocals.Promote clinical implementation of advanced technology and technique (hardware, software, or procedural) to improve the planning, imaging and delivering of radiation treatments.Follow regulatory and insure compliance with all local, state and federal agencies promulgating regulations affecting radiation devices and sources and radiological physics services; staff licenses, etc.Ensure accurate production of treatment accessories through monitoring of machine shop, Decimal contract, and/or outside vendor, production techniques and QA processes.Research and Development:Participate in clinical research and study on anatomic/functional/biological image guidance, treatment planning optimization, motion/variation management, and improvement of dose delivering accuracy and efficiency, as well as treatment process control and adaptation.Promote, lead and participate in advanced technology development and clinical application on imaging, dose/treatment position detection, dose response measurement, and treatment planning/delivering.Promote new research and development projects and directions to optimal treatment and patient care.Participate and provide technical support on the clinical translational study and clinical protocol development and implementation.Effort to obtain extramural funds for clinical research and technology development.Education and Training:Education of radiation oncology staff including but not limited to: Radiation Oncology Residents (physician and physics), Clinical Physics Students, Dosimetrists and Radiation Therapists.Mentoring of Radiation Oncology Residents (physician and physics), graduate students, postdocs, research associates, medical students and research fellow on research and study projects.BENEFITSCorewell offers a comprehensive benefits package to meet your financial, health and life-work balance goals.·NEW On-demand pay program – powered by Payactiv·Generous paid time off, holidays and flexible scheduling·Our employees receive special discounts on a wide range of products and services·Exceptional health, dental, vision and prescription drug insurance plans·Generous retirement savings, disability insurance, identify theft protection and even home and auto insurance·Free onsite parking at all campusesFacilitate training and continuing education of all clinical staff on treatment techniques and technology.Primary LocationSITE - Royal Oak Hospital - 3601 W 13 Mile Road - Royal OakDepartment NameRadiation Oncology - Royal OakEmployment TypeFull timeShiftDay (United States of America)Weekly Scheduled Hours40Hours of Work8-5 / 2-10Days WorkedM-FWeekend FrequencyVariable weekendsCURRENT COREWELL HEALTH TEAM MEMBERS – Please apply through Find Jobs from your Workday team member account. This career site is for Non-Corewell Health team members only.Corewell Health is committed to providing a safe environment for our team members, patients, visitors, and community. We require a drug-free workplace and require team members to comply with the MMR, Varicella, Tdap, and Influenza vaccine requirement if in an on-site or hybrid workplace category. We are committed to supporting prospective team members who require reasonable accommodations to participate in the job application process, to perform the essential functions of a job, or to enjoy equal benefits and privileges of employment due to a disability, pregnancy, or sincerely held religious belief.Corewell Health grants equal employment opportunity to all qualified persons without regard to race, color, national origin, sex, disability, age, religion, genetic information, marital status, height, weight, gender, pregnancy, sexual orientation, gender identity or expression, veteran status, or any other legally protected category.An interconnected, collaborative culture where all are encouraged to bring their whole selves to work, is vital to the health of our organization. As a health system, we advocate for equity as we care for our patients, our communities, and each other. From workshops that develop cultural intelligence, to our inclusion resource groups for people to find community and empowerment at work, we are dedicated to ongoing resources that advance our values of diversity, equity, and inclusion in all that we do. We invite those that share in our commitment to join our team.You may request assistance in completing the application process by calling .

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 11,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Shelby- Shelby Township, MI,United States (US) Employment Status: Hourly Full-Time Function: EngineeringControls EngineerJob Summary:Candidate will work out of Fori’s Shelby Twp. Michigan facility and will report to the Controls Engineering Manager – Welding.Position Summary:Engineering a well-defined section of a larger project or acting as a project engineer on a small project.Control panel concept and design based online up information from the Project Engineer. The Controls Engineer will take standards and formats given to him/her by the Project Engineer and incorporate them into a part of the project.Guarantee the workability, completeness, and accuracy of all designs. Controls Engineers shall be able to properly design all aspects of a control panel. Complete designs include all aspects of a control panel from schematics to layouts and Bill of Materials.Coordinate with the Project Engineer regarding schedule, design concepts and other status information on areas of concern.Ensure that designs are consistent with other designs on the project.Participate in internal and external design reviews of deliverables.Ensure that all designs meet either Fori or customer standards.Fully document and maintain engineering records for incorporation into engineer’s job book.Write software on assigned areas. Controls Engineers shall understand ladder logic, MMI and C++ programming.Perform start up and stand by on assigned areas. Controls Engineers shall be able to operate and debug machinery.Provide engineering liaison to manufacturing and field service departments.Educaton and Experience:Bachelor's degree in Engineering;Electrical or Computer Engineering preferred.Experince and demonstrated proficeincy in Rockwell FactoryTalk ViewRockwell Logix 5000Microsoft Office SuiteIndustry as a Controls Engineer is a plusPhysical Demands and Work EnvironmentThe physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Physical demands: While performing duties of job, employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; talk and hear. Repetition with activity; computer work.Work environment: The noise level in the work environment is usually moderate.The Lincoln Electric Company is a government contractor that complies with the requirements of the Vietnam Era Veterans’ Readjustment Assistance Act of 1974 and requests priority referrals for protected veterans for our job openings.Lincoln Cutting Systems does not accept unsolicited resumes from third-party recruiters. Resumes submitted to any employee(s) of Lincoln Cutting Systems without a signed vendor agreement, by the Manager of Recruiting & Training, will become property of Lincoln Cutting Systems. Verbal or written commitments from any other member of The Lincoln Electric Company will not be considered binding terms. Lincoln Cutting Systems will not pay a fee to any third-party recruiter that has not coordinated their recruiting activity through the Recruiting Department.EOE AA M/F/Vet/Disability“Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, protected veteran status or disability”Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Title: Emissions Certification Engineer – Automotive Emissions & Environmental Homologation Location: Dearborn, Michigan - Onsite Engineering position with lead responsibility for coordinating emissions certification activities.. Responsibilities including: • Develop and maintain project work plans including status updates. • Coordinate with activities regarding prototype vehicle and part requirements and availability. • Support communication and confirmation of vehicle instrumentation requirements. • Coordinate with proving ground to execute vehicle mileage break-in. • Perform emission certification testing: o Test request generation o Data analysis o Coordinating vehicle updates, reflashes and/or troubleshooting as required. o Cross-functional meeting support as required o Coordinate catalyst bench aging o Coordinating Witness Testing o S. Korean Documentation • Compile and submit running change and/or application documentation to EPA/CARB/Witnesses. • Support any EPA confirmatory testing. Requirements BS in Engineering or related field Emissions certification experience.

INTERNSHIP FORMAT In-Person: The format for this internship will be in-person, where the intern will be required to work on-site at the Stellantis Headquarters and Technology Center in Auburn Hills, Michigan and/or at Stellantis manufacturing plants located in Metro-Detroit. Some interns may be eligible for housing assistance per company policy. INTERNSHIP OVERVIEW When: The internship program will run from May 19 - August 8, 2025.Where: All internships are in the United States. Even remote work assignments must be completed within the United States. Transportation: Interns are responsible for getting to and from work daily. Stellantis does not provide transportation to interns. STELLANTIS INTERNSHIP PROGRAM HIGHLIGHTS The Stellantis Internship Program offers a unique opportunity for highly motivated, innovative, and inspired individuals to work on challenging assignments where contribution, teamwork and communication are vital to the success of the organization. As a leading-edge company, we provide real world challenges and rewarding intern experiences to candidates from a variety of colleges and universities while providing a competitive salary. Interns will be assigned to a department based on the candidate's background and skill set. The assignments are project-oriented, meaningful to the department and allow the intern to provide valuable contributions. Interns experience a sense of personal accomplishment and learn about the corporate business culture through work assignments, structured activities, and exclusive intern networking events. Interns that demonstrate outstanding qualities may be invited back for a return internship the following summer or may be considered for full-time positions. Internship Benefits: Exposure to cutting-edge projects and technologies Collaborative work environment Mentorship from experienced professionals Networking opportunities with peers and leaders Skill development workshops and training sessionsPaid US holidaysStellantis Employee Advantage Vehicle Discount ProgramEligible interns may be able to participate in the Company Vehicle Employee Lease Program DEPARTMENT DETAILS As an intern within the Electrical, Electronic and Hardware Engineering team,you may work within one of the following areas: Infotainment and Connectivity Establish communication and coordination strategies with Platform Teams, Mopar Connectivity Teams, Service Teams, Brand and Quality to ensure all aspects from feature development to quality meet the necessary targets and goals Propulsion Systems Deliver propulsion controllers, BMS hardware, sensors and actuators to achieve best in class powertrain reliability, emissions and drivability. Deliver 12V sub-system design and components. Test, validate and integrate propulsion system software and controls Mechatronics Systems To be an agile and innovate driver in delivering customer-centric visible and invisible integrated electronics to all Stellantis vehicle brands Harness and Distribution Enable everything in our vehicles to meet its goals. Design development, geometry creation and packaging of electronic components and all harnesses. Flawless and lasting connections resulting in customer satisfaction – no dealership visits. Build and grow team knowledge and connection. Validation and Industrialization Support Stellantis delivering bug free electronics to each team, to each plant and to each customer globally. Program Management Lead engineering teams to guarantee development and maintenance of electronic systems for all top hats, modules, powertrain, platform and connected services projects in respect of the QCTP commitments. STELLANTIS DOES NOT PROVIDE IMMIGRATION-RELATED SPONSORSHIP(e.g., H-1B, TN, STEM OPT, F-1, etc.)FOR THIS ROLE.IF YOU WILL REQUIRE SPONSORSHIP NOW OR IN THE FUTURE IN ORDER TO WORK IN THIS POSITION, PLEASE DONOT APPLY.

ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday

INTERNSHIP FORMAT In-Person: The format for this internship will be in-person, where the intern will be required to work on-site ateither the Stellantis Headquarters and Technology Center in Auburn Hills, Michigan and/or at the Chelsea Proving Grounds in Chelsea, Michigan.Some interns may be eligible for housing assistance per company policy. INTERNSHIP OVERVIEW When: The internship program will runfrom May 19 -August 8, 2025.Where: All internships are in the United States.Even remote work assignments must be completed within the United States.Transportation: Interns are responsible for getting to and from work daily. Stellantis does not provide transportation to interns. STELLANTIS INTERN PROGRAM HIGHLIGHTS The Stellantis Intern Program offers a unique opportunity for highly motivated, innovative, and inspired individuals to work on challenging assignments where contribution, teamwork and communication are vital to the success of the organization. As a leading-edge company, we provide real world challenges and rewarding intern experiences to candidates from a variety of colleges and universities while providing a competitive salary. Interns will be assigned to a department based on the candidate's background and skill set.The assignments are project-oriented, meaningful to the department and allow the intern to provide valuable contributions. Interns experience a sense of personal accomplishment and learn about the corporate business culture through work assignments, structured activities, and exclusive intern networking events. Interns that demonstrate outstanding qualities may be invited back for a return internship the following summer or may be considered for full-time positions. Internship Benefits: Exposure to cutting-edge projects and technologies Collaborative work environment Mentorship from experienced professionals Networking opportunities with peers and leaders Skill development workshops and training sessions Paid US holidays Stellantis Employee Advantage Vehicle Discount Program Eligible interns may be able to participate in the Company Vehicle Employee Lease Program DEPARTMENT DETAILS Engineering Summer interns are assigned to a department within Engineering based on the candidate's technical background. The assignment is project-oriented, meaningful to the department, allows the intern to take responsibility for a major task, and allows the intern to experience a sense of personal accomplishment and contribution. Interns will get to experience corporate business culture and gain the communication and etiquette skills required. They'll gain consideration for direct placement into our Chrysler Institute of Engineering (CIE) Trainee Program. They'll also get to share knowledge gained from recent courses and further develop computer skills and learn new systems and software. STELLANTIS DOES NOT PROVIDE IMMIGRATION-RELATED SPONSORSHIP(e.g., H-1B, TN, STEM OPT, F-1, etc.)FOR THIS ROLE.IF YOU WILL REQUIRE SPONSORSHIP NOW OR IN THE FUTURE IN ORDER TO WORK IN THIS POSITION, PLEASE DONOT APPLY.

Title: Fuel Economy Engineer – Vehicle Homologation & Compliance Location: Dearborn, MI Engineering positions with lead responsibility for coordinating fuel economy certification activities. Responsibilities including: • Develop and maintain project work plans including status updates. • Coordinate with activities regarding prototype vehicle and part requirements and availability. • Support communication and confirmation of vehicle instrumentation requirements. • Coordinate with proving ground to execute vehicle mileage break-in. • Perform fuel economy testing: o Test request generation o Data analysis o Coordinating vehicle updates, reflashes and/or troubleshooting as required. o Cross-functional meeting support as required o Coordinate catalyst bench aging • Compile and submit test and supporting documentation to EPA as needed or required. • Support any EPA confirmatory testing. Requirements BS in Engineering or related field Fuel Economy homologation and compliance experience.

Description: Milton Hershey School (MHS) is one of the world's best private schools, where students in pre-K through 12th grade from disadvantaged backgrounds receive an exceptional career-focused education with housing, meals, and moreand all costs are covered. Thanks to the generosity of Milton and Catherine Hershey, who founded the school in 1909, the school is fully endowed and has the resources to ensure both students and staff are provided everything they need to thrive. MHS is hiring married couples to become flex houseparents. Flex houseparents are couples who reside in on-campus student homes, guiding and nurturing a group of approximately 8-12 students. Flex houseparents provide a consistent family-like structure for students and handle responsibilities such as driving, administering medication, budgeting, reporting, etc. When initially hired, flex houseparents cover different student homes before being assigned to one specific home. Benefits ·Salary of $43,825 per person (a total compensation package of approx. $150,000 per couple which includes free housing, meals while on duty, utilities, and more) ·Comprehensive benefits: medical, dental, and vision insurance; health savings and flexible spending accounts; life insurance; disability options; retirement savings ·Relocation assistance and paid training provided ·Schedule of nine days on followed by three days off. Workdays include a period of personal time while students are at school ·Three-week paid summer vacationQualifications: ·Experience working or volunteering with youth, preferably from under-served settings ·This is a two-person job for couples who have been legally married for at least two years ·Both spouses should be age 27 or older ·No more than three dependent children may reside in the student home ·Abide by a smoke-free and weapon-free campus. No alcohol is permitted while on duty ·Limitations on pets. Only fish and one dog of approved breeds is permitted ·Valid driver’s license; ability to become certified to drive student home vans ·Couples must be comfortable leading students in daily devotions and take students to Judeo-Christian Sunday chapel services (Note: Proselytizing is prohibited) ·High school diploma or GED required ·Must be able to lift up to 50 lbs. ·Candidates must demonstrate a high degree of integrity as all staff are role models for students. ·Both spouses must complete an individual employment application This is a unique career path that takes consideration and commitment from both spouses. If you have any specific questions before or after applying, please reach out to our recruitment team at .

Description: Milton Hershey School (MHS) is one of the world's best private schools, where students in pre-K through 12th grade from disadvantaged backgrounds receive an exceptional career-focused education with housing, meals, and moreand all costs are covered. Thanks to the generosity of Milton and Catherine Hershey, who founded the school in 1909, the school is fully endowed and has the resources to ensure both students and staff are provided everything they need to thrive. MHS is hiring married couples to become flex houseparents. Flex houseparents are couples who reside in on-campus student homes, guiding and nurturing a group of approximately 8-12 students. Flex houseparents provide a consistent family-like structure for students and handle responsibilities such as driving, administering medication, budgeting, reporting, etc. When initially hired, flex houseparents cover different student homes before being assigned to one specific home. Benefits ·Salary of $43,825 per person (a total compensation package of approx. $150,000 per couple which includes free housing, meals while on duty, utilities, and more) ·Comprehensive benefits: medical, dental, and vision insurance; health savings and flexible spending accounts; life insurance; disability options; retirement savings ·Relocation assistance and paid training provided ·Schedule of nine days on followed by three days off. Workdays include a period of personal time while students are at school ·Three-week paid summer vacationQualifications: ·Experience working or volunteering with youth, preferably from under-served settings ·This is a two-person job for couples who have been legally married for at least two years ·Both spouses should be age 27 or older ·No more than three dependent children may reside in the student home ·Abide by a smoke-free and weapon-free campus. No alcohol is permitted while on duty ·Limitations on pets. Only fish and one dog of approved breeds is permitted ·Valid driver’s license; ability to become certified to drive student home vans ·Couples must be comfortable leading students in daily devotions and take students to Judeo-Christian Sunday chapel services (Note: Proselytizing is prohibited) ·High school diploma or GED required ·Must be able to lift up to 50 lbs. ·Candidates must demonstrate a high degree of integrity as all staff are role models for students. ·Both spouses must complete an individual employment application This is a unique career path that takes consideration and commitment from both spouses. If you have any specific questions before or after applying, please reach out to our recruitment team at .

Description: Milton Hershey School (MHS) is one of the world's best private schools, where students in pre-K through 12th grade from disadvantaged backgrounds receive an exceptional career-focused education with housing, meals, and moreand all costs are covered. Thanks to the generosity of Milton and Catherine Hershey, who founded the school in 1909, the school is fully endowed and has the resources to ensure both students and staff are provided everything they need to thrive. MHS is hiring married couples to become flex houseparents. Flex houseparents are couples who reside in on-campus student homes, guiding and nurturing a group of approximately 8-12 students. Flex houseparents provide a consistent family-like structure for students and handle responsibilities such as driving, administering medication, budgeting, reporting, etc. When initially hired, flex houseparents cover different student homes before being assigned to one specific home. Benefits ·Salary of $43,825 per person (a total compensation package of approx. $150,000 per couple which includes free housing, meals while on duty, utilities, and more) ·Comprehensive benefits: medical, dental, and vision insurance; health savings and flexible spending accounts; life insurance; disability options; retirement savings ·Relocation assistance and paid training provided ·Schedule of nine days on followed by three days off. Workdays include a period of personal time while students are at school ·Three-week paid summer vacationQualifications: ·Experience working or volunteering with youth, preferably from under-served settings ·This is a two-person job for couples who have been legally married for at least two years ·Both spouses should be age 27 or older ·No more than three dependent children may reside in the student home ·Abide by a smoke-free and weapon-free campus. No alcohol is permitted while on duty ·Limitations on pets. Only fish and one dog of approved breeds is permitted ·Valid driver’s license; ability to become certified to drive student home vans ·Couples must be comfortable leading students in daily devotions and take students to Judeo-Christian Sunday chapel services (Note: Proselytizing is prohibited) ·High school diploma or GED required ·Must be able to lift up to 50 lbs. ·Candidates must demonstrate a high degree of integrity as all staff are role models for students. ·Both spouses must complete an individual employment application This is a unique career path that takes consideration and commitment from both spouses. If you have any specific questions before or after applying, please reach out to our recruitment team at .