Overview: POSITION TITLE (Oracle title)MECHANICWORKING TITLEMechanic II SCHOOL/DEPARTMENTTransportationLOCATIONRock Quarry Rd. Office Complex, Raleigh, NCPAY GRADENoncertified Grade 23FLSA STATUSNonexemptELIGIBILITY FOR EMPLOYMENT CONTRACTNoWORK WEEK SCHEDULEMonday-Friday (occasional evenings or weekends)POSITION PURPOSE:Performs diagnostics, troubleshooting, and repairs on school bus and service vehicles’ GPS tracking systems, video recording systems, and other onboard technology systems.MINIMUM QUALIFICATIONS: KNOWLEDGE, SKILLS, AND ABILITIES (KSAs)Considerable knowledge of Microsoft Office specifically Word, Excel, and PowerPoint; Google Apps;Considerable knowledge of all aspects of vehicle and school bus operation and repair techniques;Considerable knowledge of GPS tracking systems, video recording systems, and onboard technology systems;Working knowledge of Occupational Safety and Health Administration (OSHA) standards;Critical thinking and problem solving skills;Ability to communicate clearly and concisely both in oral and written form using a variety of communication techniques and tools to ensure the appropriate flow of information, collaborative efforts, and feedback;Ability to work independently and part of a team and complete tasks in the absence of clear direction;Ability to perform arithmetic calculations;Ability to establish and maintain effective working relationships with school system staff.EDUCATION, TRAINING, AND EXPERIENCEHigh school diploma or equivalent;Some post-secondary education in electrical equipment repair;Two years of experience directly related to school bus and automotive repair;Other combinations of applicable education, training, and experience which provide the knowledge, skills, and abilities necessary to perform effectively in the position may be considered.CERTIFICATION AND LICENSE REQUIREMENTSMust hold and maintain a valid North Carolina commercial driver’s license.SPECIAL REQUIREMENTSEmployee must provide own basic tools.ESSENTIAL DUTIES AND RESPONSIBILITIES:Installs, services, identifies, and repairs faults on electronically controlled GPS vehicle tracking system components, video recording systems, and other onboard technology systems.Utilizes electronic system software to monitor system performance and identify faulty units.Responsible for performing maintenance, repair, and service work on school buses and service vehicles.Troubleshoots appropriate corrective measures and performs work to provide a solution.Tracks equipment inventory using spreadsheets.Maintains compliance and adherence to all safety procedures, occupational health practices, and maintains a safe work environment.Performs other related duties, as assigned.WORK ENVIRONMENT/PHYSICAL REQUIREMENTSThis position operates in an indoor and outdoor environment. This role routinely variety of equipment such as computers, hand/power tools, etc. The position, at times, must be able to come into direct contact with school system staff, contractors, vendors, and external agencies. Work is considered heavy physical work, requiring the exertion of up to 50 pounds of force. The work frequently requires the ability to operate automotive equipment. Frequent exposure to hazardous materials, gases and chemicals, moving parts, and inclement weather conditions.EFFECTIVE DATE:10/2023DISCLAIMER:The above statements are intended to describe the general purpose and responsibilities assigned to this position. They are not intended to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and skills required by the employees assigned to this position. This description may be revised by HR and approved at any time.

OverviewWho we areToyota Manufacturing is looking to develop new innovative solutions to support the future of mobility, and values being a member of a local and global community. We offer an inclusive team environment that values “respect for people” and we are a company with a rich history and an exciting future to pursue your professional dreams. Along with great pay, amazing benefits, and a stable work environment – Toyota Manufacturing has it all.To save time applying, Toyota does not offer sponsorship of job applicants for employment-based visas or any other work authorization for this position currently.What we offer Starting hourly rate of $31.00 - $43.50 per hour based on experience and skill level.Paid holidays and paid time off.Excellent health care & wellness plans for your immediate family.Professional development & growth, as well as tuition reimbursement.Work environment built on teamwork and respect.Who we’re looking forToyota’s Maintenance Departments are looking for passionate and highly motivated Team Members to support the safety, quality, production, and cost goals of the manufacturing operation. Maintenance Team Members play a critical role in the success of our Maintenance Teams at Toyota.What you’ll be doingAs a Facilities Maintenance Team MemberSupporting daily operations and maintenance for Plant utility and building systems – Power, chilled water, compressed air, HVAC, dust collection equipment, and Tank Farm & Pumps.ORAs an Industrial Maintenance Team MemberSupporting daily operations and maintenance for Plant processing equipment, the equipment utilized to make the products.What you bringIndustrial and/or Facilities Maintenance or related Military experience.Demonstrated success in troubleshooting and problem-solving.Available to work any shift including overtime, holidays, weekends, and shutdowns.Computer skills (Microsoft Suite, Maximo/CMMS, etc.).Technical skills and knowledge in any of the following areas: PLC's, Computers & Information Technology, Hydraulic/Pneumatic, Motion/Motor Control, Welding and Machining.Ability to work outside when needed.Added bonus if you have:Degree in Industrial Maintenance, Electrical Systems, Industrial Automation.Experience or Certifications in HVAC, Low & Medium voltage power or Chemical systems.Experience or Certifications in Reliability Centered Maintenance and/or Condition Based Monitoring techniques.Knowledge of battery; cell/module; or similar experience in a highly automated production environment.Experience within industrial processing (example: PLC programming, controls, IoT data collection / storage / analysis, mechanical precision, vision system, robot maintenance, etc.).Experience with predictive maintenance through condition monitoring (for example: vibration analysis, oil analysis, thermography, current analysis, etc.).Knowledge or experience with Lean Manufacturing principles (Shop Organization, Visualization, Problem Solving).Knowledge or experience with Reliability Techniques: FMEA, RCM, etc.What we’ll bringDuring your interview process, our team can fill you in on all the details of our industry-leading benefits and career development opportunities. A few highlights include:A work environment built on teamwork, flexibility, and respect.Professional growth and development programs to help advance your career, as well as tuition reimbursement.Team Member Vehicle Purchase Discount.Toyota Team Member Lease Vehicle Program (if applicable)Comprehensive health care and wellness plans for your entire family.Toyota 401(k) Savings Plan featuring a company match, as well as an annual retirement contribution from Toyota regardless of whether you contribute.Paid holidays and paid time off.Referral services related to prenatal services, adoption, childcare, schools and more.Belonging at ToyotaOur success begins and ends with our people. We embrace diverse perspectives and value unique human experiences. Respect for all is our North Star. Toyota is proud to have 10+ different Business Partnering Groups across 100 different North American chapter locations that support team members’ efforts to dream, do and grow without questioning that they belong. As a company that has been one of DiversityInc’s Top 50 Companies for Diversity and a member of The Billion Dollar Roundtable supporting minority and woman-owned suppliers for over 10 years, we are proud to be an equal opportunity employer that celebrates the diversity of the communities where we live and do business.Applicants for our positions are considered without regard to race, ethnicity, national origin, sex, sexual orientation, gender identity or expression, age, disability, religion, military or veteran status, or any other characteristics protected by law.Have a question or need assistance with your application Check out the How to Applysection of ourcareers page on Toyota.com or send an email to .

Company: Gerber Collision & GlassWELCOME TO GERBER COLLISION & GLASSOur Team Members Drive Us! Gerber Collision & Glass is one of the largest collision repair companies in North America. With $2+ billion in sales, over 800 locations and growing, our 10,000+ team members across the United States and Canada are passionate about delivering our goal to WOW Every Customer and Be the Best!We invite you to join our team. Gerber offers a great place to launch and grow careers. As we continue to grow, we have endless opportunities for you to grow with us.Gerber Collision & Glass recognizes, values and welcomes all applicants with unique talents and abilities from all backgrounds and characteristics. All qualified individuals are encouraged to apply, including individuals with disabilities and Protected Veterans.Job Description:The Auto Body Technician’s primary responsibility and accountability includes providing an exceptional and successful customer experience through the meticulous assessment and quality repair of each customer’s vehicle to restore it back to pre-accident condition. The Auto Body Technician thoroughly disassembles, repairs, and reassembles each vehicle while playing a pivotal role to our company’s promise of speed, quality and customer excellence. The Auto Body Technician works in alignment with all team members in achieving the repair facilities KPIs and is committed to being a dedicated Brand Ambassador of The Boyd Group at all times.Key Job ResponsibilitiesEnsure consistent execution of WOW (Wow Operating Way) plan.Plans the repair work that is necessary and prepares cost estimates for customers. Uses various tools such as cutting guns, plasma cutters, hydraulic jacks, hammers, and pliers to repair sections of a vehicle.Hammers out dents, dimples, and other minor body damage if possible; mixes and applies filler resins to repair dents when other methods are not feasible.Realigns car chassis and frames to repair structural damage.Removes damaged sections of vehicles and replaces them with new or aftermarket parts. Replaces or repairs glass and windshields as needed.Replaces or repairs interior parts as needed.Welds and otherwise attaches or fits parts into place and Prepares and repaints vehicles with factory-specified paint or agreed-upon equivalent.Attempts to complete work orders within labor time guidelines. Ensures all work has been executed correctly by inspecting vehicles after repair.Performs other related duties as assigned. Education and/or Experience RequiredHigh school diploma or equivalent required.Successful completion of technical school program OR a 3-year apprenticeship as an auto body repairer.Required Skills/Abilities Ability to read job orders and work with very little supervision.Ability to work with other repairers within an auto body shop.Thorough understanding of methods and procedures to repair vehicle bodies.Thorough understanding of how to use tools required for the trade.Other RequirementsMust be able to work safely in a noisy area with many odors present.Must be able to lift up to 30 pounds at times.Must be able to visually inspect vehicle damage in a variety of weather conditions.Must be able to bend, stretch, kneel, and squat to perform repairs and inspections.Please note, this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.The physical demands of your job must be met to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the job.Benefits That Drive Your SuccessGerber offers the comprehensive benefits you expect from an industry leader, including:Up to 80 hours of Paid Time Off annually2 weeks of Paid Parental Leave for Full time Employees who work a minimum of 30 hours per week6 paid holidays annuallyMedical, Prescription Drug, Dental & Vision Insurance401(k) Retirement Plan with company matchEmployer Paid Short-Term Disability & Life InsuranceAdditional Voluntary Life InsuranceContinuing Education OpportunitiesFree Prescription or Non-Prescription Safety Glasses annuallyAnnual Voluntary Uniform StipendGerber Collision & Glass is proud to be an equal opportunity employer committed to an inclusive and diverse workplace. All qualified candidates will receive consideration for employment, regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, marital status, or any other consideration, prohibited by law or by contract.About UsGerber Collision & Glass has been WOWing customers with our collision repair services for over 80 years. Please visit gerbercareers.com to learn more about our company.

Req ID:449226Address: 1217 Trollingwood Hawflds Rd Mebane, NC, 27302Benefits: * Fuel Your Growth with Love's - company funded tuition assistance program* Paid Time Off * Flexible Scheduling * 401(k) – 100% match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Hiring Immediately Welcome to Love’s!Diesel Technicians work in a fast-paced environment and maintain clean places with friendly faces. You will interact with customers & drivers from all over, making their travels and their day better. Job Functions: Troubleshoot and repair light mechanical issues that may include wheel-end assemblies, electrical systems, suspensions, A/C, or engine componentsAssist customers with roadside servicesProvide preventative maintenance servicesAbility to move, lift 75+ pounds working in close quarters. Ability to work in various temperatures.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Work a rotating schedule that alternates between day and night as needed.Ability to obtain a medical card through the Department of Transportation. (paid by Love’s) Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer. Veterans encouraged to apply.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

Established in 2009, Impact Fire Services was the vision of a group of experienced industry professionals that wanted to build a best-in-class fire protection and life safety company. Through superior customer service and technical expertise, we have developed long-standing relationships with the leading businesses in our markets. We are a full-service fire protection company, providing installation, maintenance, inspection, monitoring, and retrofit of fire safety systems. Come join a dynamic team of fire protection professionals, many of whom carry NICET and manufacturer certifications in leading brands. Impact Fire has deep experience supporting many industries including retail, healthcare, education and restaurants. Today, we operate over 30+ district offices and employ over 1,100 employees across multiple states throughout the USA. At Impact Fire Services you can learn a trade with multiple career paths in fire and life safety while benefiting from an employee focused company culture that allows you to gain mentorship and training provided by leading experts at one of the fastest growing companies in the industry. Whether you have transferable skills, prior industry experience, or are looking to start your journey, our apprenticeship programs will give you the support and knowledge you need to go further in your career. Why work with us At Impact Fire, we are a group of hardworking, dedicated fire protection professionals committed to protecting lives and property from fire. Our cohesive team spirit and customer service-oriented culture are expressed in all that we do. We operate with the belief that every team member plays a critical role in our success. We operate in 30+ district office locations across the United States, supporting industries ranging from retail and healthcare to education and restaurants. Please text “ImpactFire” to to connect with Ember, Impact Fire’s Recruiting Assistant, to learn more about this position and the company.Benefits of joining Impact Fire Services When you join Impact Fire you will receive: Competitive compensationPay is on a weekly cycle, every FridayCareer Advancement OpportunitiesCompetitive benefits, including healthcare, dental, vision, life insurance, paid time off and holidays Company paid short and long-term disability Immediately vested in our 401(k) company match Exceptional guidance and support from our managers Collaborative culture & environmentRobust training opportunities with company reimbursement upon achieving required licensing Apprenticeship programs for fire sprinkler, fire alarm and inspection positions Opportunity to work alongside some of the best talent in the fire protection industryThe Fire Sprinkler Inspector/Service conducts on-site inspections and tests and performs small inspection deficiency repairs such as: (5 Year Inspections, 5 Year Hydro Test, Painted sprinklers, etc). Job Responsibilities: Tests alarms, valves, switches and other fire suppression equipment as assigned Responsible for all licensing and certifications required to inspect and test systems. Generates testing reports for the client Generates repair or service quotes based on identified deficiencies Conducts service calls and makes repairs as assigned Performs smaller installations and upfits as directed Responsible to follow safety protocols of the company Responsible for the maintenance of assigned vehicle Performs other tasks and duties as requested by management. Job Requirements: Fire Sprinkler Inspector with NICET Level 2 or equivalent in NFPA 25 Inspections and testing.Minimum of 5 years’ experience with lead service technician capabilities to perform repairs and maintenance.Ability to take direction and work as part of a teamSuccessful completion of a drug test and pre-employment background screening is required. MVR checks are required for all driving positions. We look forward to talking with you about career opportunities with Impact Fire Services. For consideration, please apply on-line.Employment with an Equal Opportunity Employer (EOE) including disability/veterans.

AutoReqId: 20955BR Pay Class: Hourly Hourly Pay Rate: $26.00 Department: Maintenance Line of Business: Aggregates Position Type: Full-Time Job Posting: Heidelberg Materials is seeking a Maintenance Mechanic for our North Raleigh Quarry facility located in Wake Forest, NC. Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. What You'll Get To Do Perform repair and maintenance involving disassembly, overhaul, assembly, and adjustments of crushing and screening or mobile equipment components.Maintain proper tool/parts inventory for specified jobs.Rebuild trucks or other motorized equipment engines and component parts.Complete maintenance projects in a timely manner to ensure production goals.Maintain up to date written or data input spreadsheets on all equipment repairs.Ensure that all equipment repairs are performed accurately to the manufacturer standards.Performs other miscellaneous mechanical and maintenance duties as assigned. What We Are Looking For Prefer 2 years prior maintenance experienceSome welding experience desiredOpen pit mining operations and aggregate products experienceFrequently lift 25 pounds; occasionally lift up to 70 pounds.MSHA training a plusNo search firms pleaseHeidelberg Materials is a Drug Free Workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

What you will doSprinkler Installer Foreman are responsible for the installation, service, and repair of fire protection systems including: wet, dry, pre-action, deluge, and foam suppression systems; as well as fire pumps and back flow devices. Also responsible for the execution of the installation project plan including equipment delivery, accurately forecasting installation hours, anticipating potential challenges and properly securing all Tyco SimplexGrinnell tools and equipment at the end of each work period so as to prevent damage or loss.How you will do itApplies judgment based on practice and precedence.May allocate work as a team leader, bringing all changes, discrepancies, and coordination problems that impair installation activities to the immediate attention of the construction manager.Frequently resolves problems through the research of multiple alternatives. Must maintain proper documentation for all work performed.May review project drawings to obtain all facts necessary to perform installation activities according to specifications.Must be able to work alternative shifts or weekends to meet customer and/or job requirements.Attend project meetings.Must adhere to all company safety policies and procedures. What we look forRequired Minimum 5 years documented experience in installation and service of fire sprinkler systems.High School Diploma or equivalent required.Follow verbal and written instructions.Capable of performing physical labor to include carrying and moving equipment and tools weighing up to 70 lbs.Able to work in unusual and sometimes difficult positions such as climbing ladders, scaffolding and high lift equipment up to 60 feet, working within ducts, crawl spaces, above ceilings, etc.Read and understand construction blueprints, diagrams, and specifications used in installation activitiesAbility to work flexible hours.Ability to adhere to, implement, and follow safety guidelines and procedures at all times.Excellent communication skills, using tact and diplomacy when dealing with customers and team members.Strong organizational skills, positive attitude, and an ability to learn quickly.

BluSky Restoration wants to hire YOU as a full-time Restoration Technician. This position has a starting pay of up to $21 an hour,depending on experience!Benefits Include:Medical, Dental, and Vision Insurance401K Plan with guaranteed matchPaid Time Off and HolidaysLife & Disability InsuranceEmployee Assistance ProgramsHealth and Wellness ProgramsBluSky apparelWhat does a Restoration Technician do They fix broken buildings!Whether it's a broken pipe or a major storm, when people have an emergency, they turn to us. That's where YOU come in - you'll respond to emergencies and restorethe lives of our customers.At BluSky, our core values are Excellence, Teamwork, Integrity, Innovation, Empathy, Passion, and, most of all, FUN!We are a culture of family.Previous experience and IIRC certifications are a plus but not required. We will help you obtain the training and development you need.Brief Description:The Restoration Technician is a first responder on property loss situations and helps mitigate damage in residential and commercial structures. Technicians are responsible for water damage mitigation, structural board-up and security, on-location cleaning, microbial remediation, content pack-outs, content processing/deodorization, content storage, and handling.Responsibilities:Water extraction and mitigationFire and smoke cleaning and restorationMicrobial remediationVandalism, crime scene, and biohazard clean-upDemolition (Demo Day!)Field management and supervision of all temporary labor personnelProvide the highest level of customer service with empathyAll other duties or projects as assignedQualifications:Possess and maintain a valid driver's licenseSuccessfully pass a national criminal background check and motor vehicle report background checkSuccessfully pass a pre-employment drug screeningAbility to be on-call 24 hours a day1 year of restoration industry or maintenance experience preferredWORK ENVIRONMENT AND PHYSICAL JOB DEMANDS:The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. The noise level in the work environment is usually quiet.The physical demands described here are representative of those that must be met by an employee to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.The employee must occasionally lift and/or move up to 25 pounds. While performing the duties of this job, the employee is regularly required to sit, use hands and fingers, reach with hands and arms, talk, and hear. The employee is required to move and walk around the office regularly.TRAVEL:Occasional travel. (Less than 25% of the time.) Some out-of-area and overnight travel may be expected for training or meetings.COMPENSATION:BluSky offers a competitive base pay between $15 - $25 per hour and a comprehensive benefits package that includes: a matching 401(k) plan, health insurance (medical, dental, and vision), paid time off, paid holidays, disability, equipment appropriate to the position (i.e., laptop, smartphone, etc.), and corporate apparel allowance.EEOC:BluSky is dedicated to the principles of equal employment opportunity. BluSky prohibits unlawful discrimination against applicants or employees on the basis of age 40 or over, race, sex, color, religion, national origin, disability, genetic information, sexual orientation, or any other applicable status protected by Federal, State, or local law.It is and will continue to be the policy of BluSky that all persons are entitled to equal employment opportunity based on their individual qualifications, performance, and potential without regard for any protected status, as required by state and federal law.

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Overview: POSITION TITLE (Oracle title)MASTER CRAFTSMANWORKING TITLEMaster Craftsman-Heating, Ventilation, and Air Conditioning (HVAC)SCHOOL/DEPARTMENTMaintenance and OperationsLOCATIONRock Quarry Road (Building B), Raleigh, NC PAY GRADENoncertified Grade 27FLSA STATUSNonexemptELIGIBILITY FOR EMPLOYMENT CONTRACTNoWORK WEEK SCHEDULEMonday-Friday (evenings and weekends requirements on a rotational basis)POSITION PURPOSE:Performs master craftsman and lead work associated with HVAC systems. Performs master craftsman level work associated with refrigeration equipment including coolers, freezers, and related systems. MINIMUM QUALIFICATIONS: KNOWLEDGE, SKILLS, AND ABILITIES (KSAs)Considerable knowledge of Microsoft Office, specifically Microsoft Word; Google Apps;Considerable knowledge of HVAC systems, refrigeration systems, and equipment and fixtures;Working knowledge of Microsoft Office, including Word and Excel;Working knowledge of Occupational Safety and Health Administration (OSHA) standards;Critical thinking and problem solving skills;Ability to work independently and part of a team and complete tasks in the absence of clear direction;Ability to perform arithmetic calculations;Ability to troubleshoot and perform maintenance and repairs on HVAC systems;Ability to communicate clearly and concisely both in oral and written form using a variety of communication techniques and tools to ensure the appropriate flow of information, collaborative efforts, and feedback;Ability to establish and maintain effective working relationships with school system staff, contractors, vendors, and external agencies.EDUCATION, TRAINING, AND EXPERIENCEHigh school diploma or equivalent;Five years of experience directly related to HVAC and refrigeration systems installation and repair.CERTIFICATION AND LICENSE REQUIREMENTSType I, II, and III chlorofluorocarbon CFC Certification;Must hold and maintain a valid motor vehicle operator’s license according to the State of NC requirements;Within twelve months of employment complete safety training according to OSHA standards.PREFERRED QUALIFICATIONS:Hold a valid HVAC and Refrigeration License determined by the North Carolina Board of HVAC Examiners;Associates Degree or technical school training in HVAC Systems.ESSENTIAL DUTIES AND RESPONSIBILITIES:Performs experienced or master craftsman level work associated with HVAC systems, materials, equipment and fixtures.Responds to assigned work orders relating to HVAC; troubleshoots appropriate corrective measures and performs work to provide a solution.Replaces faulty or defective HVAC equipment and systems.Prepares and maintains records, work logs, and reports, as needed.Adheres to laws, regulations and requirements set forth in the WCPSS Safety procedures/policies.Maintains compliance and adherence to all safety procedures, occupational health practices, and maintaining a safe work environment.Performs other related duties, as assigned.WORK ENVIRONMENT/PHYSICAL REQUIREMENTSThis job operates in in an indoor and outdoor environment. This role routinely uses standard office equipment such as computers, hand/power tools, etc. The position, at times, must be able to come into direct contact with school system staff, contractors, vendors, and external agencies. Work is considered heavy physical work, requiring the exertion of up to seventy-five pounds of force. The work requires the ability to operate automotive equipment. Frequent exposure to hazardous materials, gases, and chemicals, moving parts, and inclement weather conditions.EFFECTIVE DATE:11/2023DISCLAIMER:The above statements are intended to describe the general purpose and responsibilities assigned to this position. They are not intended to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and skills required by the employees assigned to this position. This description may be revised by HR and approved at any time.

OverviewWho we areToyota Manufacturing is looking to develop new innovative solutions to support the future of mobility, and values being a member of a local and global community. We offer an inclusive team environment that values “respect for people” and we are a company with a rich history and an exciting future to pursue your professional dreams. Along with great pay, amazing benefits, and a stable work environment – Toyota Manufacturing has it all.To save time applying, Toyota does not offer sponsorship of job applicants for employment-based visas or any other work authorization for this position currently.What we offer Starting hourly rate of $31.00 - $43.50 per hour based on experience and skill level.Paid holidays and paid time off.Excellent health care & wellness plans for your immediate family.Professional development & growth, as well as tuition reimbursement.Work environment built on teamwork and respect.Who we’re looking forToyota’s Maintenance Departments are looking for passionate and highly motivated Team Members to support the safety, quality, production, and cost goals of the manufacturing operation. Maintenance Team Members play a critical role in the success of our Maintenance Teams at Toyota.What you’ll be doingAs a Facilities Maintenance Team MemberSupporting daily operations and maintenance for Plant utility and building systems – Power, chilled water, compressed air, HVAC, dust collection equipment, and Tank Farm & Pumps.ORAs an Industrial Maintenance Team MemberSupporting daily operations and maintenance for Plant processing equipment, the equipment utilized to make the products.What you bringIndustrial and/or Facilities Maintenance or related Military experience.Demonstrated success in troubleshooting and problem-solving.Available to work any shift including overtime, holidays, weekends, and shutdowns.Computer skills (Microsoft Suite, Maximo/CMMS, etc.).Technical skills and knowledge in any of the following areas: PLC's, Computers & Information Technology, Hydraulic/Pneumatic, Motion/Motor Control, Welding and Machining.Ability to work outside when needed.Added bonus if you have:Degree in Industrial Maintenance, Electrical Systems, Industrial Automation.Experience or Certifications in HVAC, Low & Medium voltage power or Chemical systems.Experience or Certifications in Reliability Centered Maintenance and/or Condition Based Monitoring techniques.Knowledge of battery; cell/module; or similar experience in a highly automated production environment.Experience within industrial processing (example: PLC programming, controls, IoT data collection / storage / analysis, mechanical precision, vision system, robot maintenance, etc.).Experience with predictive maintenance through condition monitoring (for example: vibration analysis, oil analysis, thermography, current analysis, etc.).Knowledge or experience with Lean Manufacturing principles (Shop Organization, Visualization, Problem Solving).Knowledge or experience with Reliability Techniques: FMEA, RCM, etc.What we’ll bringDuring your interview process, our team can fill you in on all the details of our industry-leading benefits and career development opportunities. A few highlights include:A work environment built on teamwork, flexibility, and respect.Professional growth and development programs to help advance your career, as well as tuition reimbursement.Team Member Vehicle Purchase Discount.Toyota Team Member Lease Vehicle Program (if applicable)Comprehensive health care and wellness plans for your entire family.Toyota 401(k) Savings Plan featuring a company match, as well as an annual retirement contribution from Toyota regardless of whether you contribute.Paid holidays and paid time off.Referral services related to prenatal services, adoption, childcare, schools and more.Belonging at ToyotaOur success begins and ends with our people. We embrace diverse perspectives and value unique human experiences. Respect for all is our North Star. Toyota is proud to have 10+ different Business Partnering Groups across 100 different North American chapter locations that support team members’ efforts to dream, do and grow without questioning that they belong. As a company that has been one of DiversityInc’s Top 50 Companies for Diversity and a member of The Billion Dollar Roundtable supporting minority and woman-owned suppliers for over 10 years, we are proud to be an equal opportunity employer that celebrates the diversity of the communities where we live and do business.Applicants for our positions are considered without regard to race, ethnicity, national origin, sex, sexual orientation, gender identity or expression, age, disability, religion, military or veteran status, or any other characteristics protected by law.Have a question or need assistance with your application Check out the How to Applysection of ourcareers page on Toyota.com or send an email to .

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Overview: POSITION TITLE (Oracle title)FACILITIES MAINTENANCE TECHNICIANWORKING TITLEFacilities Maintenance TechnicianSCHOOL/DEPARTMENTMaintenance and Operations (M&O)LOCATIONRock Quarry Road, Raleigh, NCPAY GRADENoncertified Grade 22FLSA STATUSNonexemptELIGIBILITY FOR EMPLOYMENT CONTRACTNoWORK WEEK SCHEDULEMonday-Friday (occasional evenings and weekends)POSITION PURPOSE:Performs entry-level work associated with the repair and maintenance in various trades to include carpentry, plumbing, electrical, roofing, painting, and glass/flooring installation.MINIMUM QUALIFICATIONS:KNOWLEDGE, SKILLS, AND ABILITIES (KSAs)Knowledge of Microsoft Office, specifically Microsoft Word and Excel; Google Apps;Knowledge of hand and power tools, materials, and methods used in general maintenance work;Effective time management skills;Ability to communicate clearly and concisely both in oral and written form using a variety of communication techniques and tools to ensure the appropriate flow of information, collaborative efforts, and feedback;Ability to accurately read, interpret, and comply with departmental procedures;Ability to provide attention to detail and to minimize errors;Ability and physical strength sufficient to move objects;Ability to recognize and report hazards and apply safe work methods;Ability to work independently and as part of a team and complete tasks in the absence of clear direction;Ability to establish and maintain effective working relationships with school system staff.EDUCATION, TRAINING, AND EXPERIENCEHigh school diploma or equivalent.CERTIFICATION AND LICENSE REQUIREMENTSMust hold and maintain a valid motor vehicle operator’s license according to the State of NC requirements.PREFERRED QUALIFICATIONS:One year of experience in a general trade.ESSENTIAL DUTIES AND RESPONSIBILITIES:Completes work orders for scheduled maintenance tasks and special projects in regard to carpentry, plumbing, electrical, roofing, painting, and glass/flooring installation.Inspects facilities for needed maintenance or repairs; performs routine installation, maintenance, and repair tasks in/on buildings and mobile classrooms.Performs physical duties such as carrying materials around facilities for maintenance, cleaning work sites, and obtaining and transporting supplies/tools/equipment.Responds to inclement weather emergencies and/or natural disasters by cleaning and clearing debris.Performs other related duties, as assigned.WORK ENVIRONMENT/PHYSICAL REQUIREMENTSThis position requires working in an indoor and outdoor environment. This role is frequently exposed to hazardous materials, gases, and chemicals, and inclement weather conditions. The position, at times, must be able to come into direct contact with school system staff, external agencies, and the community. Work is considered medium physical work, requiring the exertion of up to 50 pounds of force. The work frequently requires driving automotive equipment.EFFECTIVE DATE: 10/2023DISCLAIMER: The above statements are intended to describe the general purpose and responsibilities assigned to this position. They are not intended to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and skills required by the employees assigned to this position. This description may be revised by HR and approved at any time.

OverviewWho we areToyota Manufacturing is looking to develop new innovative solutions to support the future of mobility, and values being a member of a local and global community. We offer an inclusive team environment that values “respect for people” and we are a company with a rich history and an exciting future to pursue your professional dreams. Along with great pay, amazing benefits, and a stable work environment – Toyota Manufacturing has it all.To save time applying, Toyota does not offer sponsorship of job applicants for employment-based visas or any other work authorization for this position currently.What we offer Starting hourly rate of $31.00 - $43.50 per hour based on experience and skill level.Paid holidays and paid time off.Excellent health care & wellness plans for your immediate family.Professional development & growth, as well as tuition reimbursement.Work environment built on teamwork and respect.Who we’re looking forToyota’s Maintenance Departments are looking for passionate and highly motivated Team Members to support the safety, quality, production, and cost goals of the manufacturing operation. Maintenance Team Members play a critical role in the success of our Maintenance Teams at Toyota.What you’ll be doingAs a Facilities Maintenance Team MemberSupporting daily operations and maintenance for Plant utility and building systems – Power, chilled water, compressed air, HVAC, dust collection equipment, and Tank Farm & Pumps.ORAs an Industrial Maintenance Team MemberSupporting daily operations and maintenance for Plant processing equipment, the equipment utilized to make the products.What you bringIndustrial and/or Facilities Maintenance or related Military experience.Demonstrated success in troubleshooting and problem-solving.Available to work any shift including overtime, holidays, weekends, and shutdowns.Computer skills (Microsoft Suite, Maximo/CMMS, etc.).Technical skills and knowledge in any of the following areas: PLC's, Computers & Information Technology, Hydraulic/Pneumatic, Motion/Motor Control, Welding and Machining.Ability to work outside when needed.Added bonus if you have:Degree in Industrial Maintenance, Electrical Systems, Industrial Automation.Experience or Certifications in HVAC, Low & Medium voltage power or Chemical systems.Experience or Certifications in Reliability Centered Maintenance and/or Condition Based Monitoring techniques.Knowledge of battery; cell/module; or similar experience in a highly automated production environment.Experience within industrial processing (example: PLC programming, controls, IoT data collection / storage / analysis, mechanical precision, vision system, robot maintenance, etc.).Experience with predictive maintenance through condition monitoring (for example: vibration analysis, oil analysis, thermography, current analysis, etc.).Knowledge or experience with Lean Manufacturing principles (Shop Organization, Visualization, Problem Solving).Knowledge or experience with Reliability Techniques: FMEA, RCM, etc.What we’ll bringDuring your interview process, our team can fill you in on all the details of our industry-leading benefits and career development opportunities. A few highlights include:A work environment built on teamwork, flexibility, and respect.Professional growth and development programs to help advance your career, as well as tuition reimbursement.Team Member Vehicle Purchase Discount.Toyota Team Member Lease Vehicle Program (if applicable)Comprehensive health care and wellness plans for your entire family.Toyota 401(k) Savings Plan featuring a company match, as well as an annual retirement contribution from Toyota regardless of whether you contribute.Paid holidays and paid time off.Referral services related to prenatal services, adoption, childcare, schools and more.Belonging at ToyotaOur success begins and ends with our people. We embrace diverse perspectives and value unique human experiences. Respect for all is our North Star. Toyota is proud to have 10+ different Business Partnering Groups across 100 different North American chapter locations that support team members’ efforts to dream, do and grow without questioning that they belong. As a company that has been one of DiversityInc’s Top 50 Companies for Diversity and a member of The Billion Dollar Roundtable supporting minority and woman-owned suppliers for over 10 years, we are proud to be an equal opportunity employer that celebrates the diversity of the communities where we live and do business.Applicants for our positions are considered without regard to race, ethnicity, national origin, sex, sexual orientation, gender identity or expression, age, disability, religion, military or veteran status, or any other characteristics protected by law.Have a question or need assistance with your application Check out the How to Applysection of ourcareers page on Toyota.com or send an email to .

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

OverviewWho we areToyota Manufacturing is looking to develop new innovative solutions to support the future of mobility, and values being a member of a local and global community. We offer an inclusive team environment that values “respect for people” and we are a company with a rich history and an exciting future to pursue your professional dreams. Along with great pay, amazing benefits, and a stable work environment – Toyota Manufacturing has it all.To save time applying, Toyota does not offer sponsorship of job applicants for employment-based visas or any other work authorization for this position currently.What we offer Starting hourly rate of $31.00 - $43.50 per hour based on experience and skill level.Paid holidays and paid time off.Excellent health care & wellness plans for your immediate family.Professional development & growth, as well as tuition reimbursement.Work environment built on teamwork and respect.Who we’re looking forToyota’s Maintenance Departments are looking for passionate and highly motivated Team Members to support the safety, quality, production, and cost goals of the manufacturing operation. Maintenance Team Members play a critical role in the success of our Maintenance Teams at Toyota.What you’ll be doingAs a Facilities Maintenance Team MemberSupporting daily operations and maintenance for Plant utility and building systems – Power, chilled water, compressed air, HVAC, dust collection equipment, and Tank Farm & Pumps.ORAs an Industrial Maintenance Team MemberSupporting daily operations and maintenance for Plant processing equipment, the equipment utilized to make the products.What you bringIndustrial and/or Facilities Maintenance or related Military experience.Demonstrated success in troubleshooting and problem-solving.Available to work any shift including overtime, holidays, weekends, and shutdowns.Computer skills (Microsoft Suite, Maximo/CMMS, etc.).Technical skills and knowledge in any of the following areas: PLC's, Computers & Information Technology, Hydraulic/Pneumatic, Motion/Motor Control, Welding and Machining.Ability to work outside when needed.Added bonus if you have:Degree in Industrial Maintenance, Electrical Systems, Industrial Automation.Experience or Certifications in HVAC, Low & Medium voltage power or Chemical systems.Experience or Certifications in Reliability Centered Maintenance and/or Condition Based Monitoring techniques.Knowledge of battery; cell/module; or similar experience in a highly automated production environment.Experience within industrial processing (example: PLC programming, controls, IoT data collection / storage / analysis, mechanical precision, vision system, robot maintenance, etc.).Experience with predictive maintenance through condition monitoring (for example: vibration analysis, oil analysis, thermography, current analysis, etc.).Knowledge or experience with Lean Manufacturing principles (Shop Organization, Visualization, Problem Solving).Knowledge or experience with Reliability Techniques: FMEA, RCM, etc.What we’ll bringDuring your interview process, our team can fill you in on all the details of our industry-leading benefits and career development opportunities. A few highlights include:A work environment built on teamwork, flexibility, and respect.Professional growth and development programs to help advance your career, as well as tuition reimbursement.Team Member Vehicle Purchase Discount.Toyota Team Member Lease Vehicle Program (if applicable)Comprehensive health care and wellness plans for your entire family.Toyota 401(k) Savings Plan featuring a company match, as well as an annual retirement contribution from Toyota regardless of whether you contribute.Paid holidays and paid time off.Referral services related to prenatal services, adoption, childcare, schools and more.Belonging at ToyotaOur success begins and ends with our people. We embrace diverse perspectives and value unique human experiences. Respect for all is our North Star. Toyota is proud to have 10+ different Business Partnering Groups across 100 different North American chapter locations that support team members’ efforts to dream, do and grow without questioning that they belong. As a company that has been one of DiversityInc’s Top 50 Companies for Diversity and a member of The Billion Dollar Roundtable supporting minority and woman-owned suppliers for over 10 years, we are proud to be an equal opportunity employer that celebrates the diversity of the communities where we live and do business.Applicants for our positions are considered without regard to race, ethnicity, national origin, sex, sexual orientation, gender identity or expression, age, disability, religion, military or veteran status, or any other characteristics protected by law.Have a question or need assistance with your application Check out the How to Applysection of ourcareers page on Toyota.com or send an email to .

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment