FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Job PurposeThe Flight Test Engineer is responsible for Test Planning, Test Execution, Data Analysis and Reporting for all activities assigned to a specific program.Key Accountabilities1. Plans, conducts and documents Flight Test activities for the Honda Jet.2. Actively participates in flight testing, development and certification, in a flying FTE capacity.3. Tracks the progress of tasks assigned to a specific aircraft and reports completion status.4. Reviews data from flight test.5. Assists Cognizant Engineer in data reduction as required.6. Prepares flight test plans and reports and reviews certification documents as required.7. Prepares flight test cards and weight-and-balance for each day's flight activities.8. Writes flight test requests, plans and procedures; support flight and ground testing; reduce and analyze flight test results; generate aircraft flight manual and pilot's operating handbook/manual performance data; and document all aspects of work performed.9. Writes test plans/requests for both flight and ground testing; reduces flight test data into non-dimensional parameters.10. Supports new product development and marketing requests.11. Provides inter-organizational, FAA/foreign certification authorization, and outside vendor/supplier communications as required.Qualifications, Experience, and SkillsRequired:1. Four-year Bachelor of Science in Engineering or equivalent combination of qualifications and experience.2. Between 10 to 20 years of flight test experience.3. Class 3 flight medical.Desired:1. Graduate of a recognized Test Pilot School or equivalent on the job experience.2. FAA DAR, Flight Analyst DER, or ODA Unit Member.3. Master's degree in Flight Test Engineering or a discipline within Flight Test.Job DimensionsDecisions ExpectedWorking Conditions1. Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.2. Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.3. Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).4. Read, hear, speak, and see with no restrictions, as required by job duties.5. Comprehend and adhere to management directions and/or safety instructions with no restrictions.6. Effectively communicate in Business English language.7. Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.8. Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.

What Makes a Honda, is Who makes a HondaHondahas a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals.At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Job PurposeThe primary support is for certified fielded products, and the secondary support is for new designs. The focus is on the Control System, specifically the HF120 Fuel Pump and Metering Unit, including associated sensors and any other aircraft engine fuel system components.Responsibilities will include supporting the resolution of problems encountered during production and field operations, following appropriate regulations, standards, and publications, and implementing corrective actions, including but not limited to design changes per company procedures. Key AccountabilitiesResponsible for working with all parties (internal and external) involved to ensure successful progress throughout the development process.Completely identify the regulatory and design requirements to ensure product success.Develop creative solutions to meet the regulatory and product requirements given.Create and maintain development plans to accomplish project goals including product weight and cost reduction to meet company targets.The focus will be on control systems, including the HF120 Fuel Pump and Metering Unit, and associated Sensors (speed, temperature, and pressure).Additional responsibilities will include designing and manufacturing test equipment supporting local testing. This will include the generation of test plans, executing or overseeing testing, data collection, and reduction, and test procedure and report writing.Support sustaining activities, such as root cause investigations for production and field issues relating to the fuel system and/or engine control system. Create plans to repair procedures, including substantiations.Qualifications, Experience, and SkillsBS in Mechanical or Aerospace EngineeringA minimum of 10 years of design experience or equivalent combination of education and experience required, preferably related to aircraft engine fuel/control system components.Strong written and verbal communication skillsKnowledge and experience using precision measuring instrumentsProficiency with Microsoft Office tools: Outlook, Excel, Word, PowerPointProficiency with 3D modelling and familiarity with computational software Knowledge of control systems, hydraulic principles, jet engine operation, and FAA regulations.Working ConditionsClimate-controlled manufacturing environment.Regular exposure to the manufacturing areas, which under certain circumstances require the use of personal protective equipment such as safety glasses with side shields, mandatory hearing protection, and safety shoes.Ability to stand for long periods of time.Ability to lift 40 pounds.Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday

Job PurposeThe Flight Test Engineering Planner is responsible for Flight Test Instrumentation and Engineering planning functions including fabrication and installation of detail parts and assemblies by creating visual and written work instructions for multiple systems and structures and maintaining the build sequence of experimental Flight Test aircraft.This is a Contingent RoleKey AccountabilitiesReporting to the Manager of Flight Coordination, the Flight Test Engineering Planner is responsible for planning sequence of installation, assembly, fabrication, and other operations to ensure efficiency and on-time delivery of work instructions to support experimental Flight Test Aircraft. Duties and Responsibilities:Plan sequence of installation, assembly, fabrication, and other operations to ensure efficiency and on-time delivery of work instructions.Support addressing issues with planning affecting the transfer of experimental aircraft from Manufacturing to Flight Test.Utilizing Teamcenter, maintain the master build sequence of the aircraft adjusting the build sequence as required to maintain efficiencies, create visual work instructions, incorporate cost reductions, and eliminate unnecessary disassembly, travelled work, and non-conformances related to planning.Review daily Engineering releases effective for experimental Flight Test aircraft to determine impacts.Manage Engineering backlog and create planning for Engineering driven changes required to support development and certification testing. Support Corrective Action investigations and resolutions.Active participant in Honda Aircraft Company’s Safety Management System.Adhere to FAA Regulations and Company Policies and Procedures.Qualifications, Experience, and SkillsAssociates, B.S.M.E., B.S.A.E., B.S.I.E., or B.S. Mfg. Eng./ Eng. Tech. preferred5+ years experience in creating and maintaining planning documentation, either visual or written5+ years manufacturing experience with fabrication, assembly, and/or installationsPrevious Flight Test experience preferred. Experience in composite drilling, assembly, electrical harness and avionics installations, and sheet metal fabrication desired.Experience with GD&T desired.Knowledge, Skills and Abilities Ability to read and interpret 2D/3D drawings/models and technical specifications.Knowledge of configuration management and the creation/maintenance of MBOMs.Ability to convert complex processes into easy to understand and followed instructions.Ability to identify, evaluate and develop solutions to complex problems.Excellent oral and written communication skills.Ability to communicate and work in a team environment to solve problems.CATIA V5/ V6 experience desired. SAP experience desired.Teamcenter Manufacturing/Process Planning, creating MBOM’s and BOP’s desired.Knowledge in MS Office Software Suite.Working ConditionsIncumbents may be routinely exposed to equipment operational noise, heat-cold-dust, and/or Aircraft Equipment, Parts, or Fuel odors.Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by Job Duties.Work in a safe and professional manner while adhering to all Regulatory Requirements (FAA, OSHA, DOT, EPA, State, and Federal Regulations, Etc.).Read, hear, speak, and see with no restrictions, as required by Job Duties.Comprehend and adhere to Management directions and/or safety instructions with no restrictions.

What Makes a Honda, is Who makes a HondaHondahas a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals.At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Job PurposeElectrical Design Sr. Engineer I is responsible for executing their advanced electrical design knowledge in both CBU and AE industries to govern PU members through development projects and research activities including new technology emphasizing product quality, cost, and on time deliverables.Key AccountabilitiesQualifications, Experience, and SkillsJob DimensionsDecisions ExpectedWorking ConditionsHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

PREVENTING ENVIRONMENTAL HARMWe go to extraordinary measures to protect our Airmen from environmental hazards and infractions. Applying engineering and scientific principles, Bioenvironmental Engineers identify and evaluate potential dangers and develop programs to prevent illness and injury. With an emphasis on discovering problems before they occur, these specialists ensure the health and safety of Airmen and their families in environments all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor of Science in engineering from an ABET-accredited institutionQualificationsCompletion of qualifying Bioenvironmental Engineering courseMinimum of 24 months of experience in bioenvironmental engineering assignmentsCompletion of Officer Training School courseMust be between the ages of 18 and have not reached your 42ndbirthday

Overview: The Registered Nurse (RN) delivers high-quality patient care and ensures positive patient outcomes through the compassionate and efficient application of nursing knowledge. Working under general supervision, this role promotes professional nursing practice by coordinating patient care through the nursing process and multidisciplinary collaboration. Responsibilities: Reviews patient needs and conditions to deliver nursing care in assigned unit to ensure that every patient receives the direct and proper care needed.Analyzes patient information, including medical history, diagnostic results, and current condition, to develop individualized nursing care plans.Prepares nursing processes, such as medication administration and treatments to provide comprehensive and effective patient care.Reconciles medical records to ensure accuracy and compliance with regulatory standards and organizational policies.Evaluates patient response to interventions and identifies any additional interventions needed to meet defined goals of care.Collaborates with interdisciplinary care team to ensure effective care planning.Performs other duties as assigned. Qualifications: EDUCATION:Required: Associate's Degree in NursingPreferred: Bachelor's Degree in NursingEXPERIENCE:Required: 1 year as a Registered NursePreferred: 1 year in a clinical specialty as defined by ANCC or national nursing organizationsLICENSURE/CERTIFICATION/REGISTRY/LISTING:Required:Registered Nurse license in North Carolina or a Compact stateBLS (CPR)-American Red Cross or AHA Healthcare Provider

Overview: A DG Registered Vascular Sonographer Dual Registered is responsible for performing various vascular and diagnostic ultrasound exams. This role is responsible for interpreting and analyzing ultrasound images to provide comprehensive reports, as well as maintaining patient records and facilitating effective communication among the healthcare team. Working under direct supervision, this position is responsible for operating, maintaining and preparing ultrasound equipment and supplies for patient testing.alent Pool; Allied HealthTalent Pool: Allied Health Responsibilities: Conducts ultrasound examinations using advanced imaging technology, capturing clear and detailed images to aid in accurate diagnosis, treatment planning, and monitoring patient progress.Interprets and analyzes ultrasound images to provide comprehensive reports for physicians and aid in timely and accurate diagnosis for appropriate patient management and improved healthcare outcomes.Maintains and prepares ultrasound equipment and supplies for patient testing to ensure optimal performance and image quality.Adheres to strict safety protocols during ultrasound procedures to minimize risks and ensure patient well-being.Provides excellent patient care by addressing patient concerns, explaining procedures, and ensuring comfort throughout the imaging process to increase patient satisfaction and cooperation.Maintains and reviews patient records and charts, and files test and examination results in chart after physician review to support efficient healthcare delivery and facilitate effective communication among the healthcare team.Performs other duties as assigned. Qualifications: EDUCATION:Required:High School Diploma or equivalentGraduate of an accredited Radiology, Imaging or related educational program and/or ultrasound programEXPERIENCE:Required: 1 yearLICENSURE/CERTIFICATION/REGISTRY/LISTING:Required:Registered Vascular Technologist (RVT) by ARDMS or Registered Vascular Sonographer (RVS) by CCIandRegistered Diagnostic Ultrasound Technologist by ARDMS or Registered Ultrasound Technologist by ARRT RT(S)BLS (CPR)-American Red Cross or AHA Healthcare Provider

Overview: The Diag Rad and CT Technologist WEO is responsible for providing high-quality patient care during Computed Tomography (CT) procedures using approved workflows and procedural protocols. Working under direct supervision, this position uses specialized computerized x-ray equipment to produce cross sectional images of the human anatomy which aid radiologists in diagnosing a wide variety of diseases and disorders. This role has a weekend option, in which the staff member is required to commit to WEO requirements and work two shifts within the WEO window for a premium rate. Responsibilities: Operates head or body x-ray scanners which create a computer-generated cross-sectional image, commonly called a CAT (Computed Axial Tomography) Scan.Performs routine and special CT exams adhering to established protocols to minimize additional imaging and limit radiation dose, maintaining exam productivity within established benchmarks.Completes all exams and documentation in Computerized Health Information (CHL) and Picture Archiving and Communication System (PACS), accurately identifying all charges associated with studies and addressing errors for a seamless workflow.Educates and prepares patients for their examinations to enhance patient understanding and cooperation during testing and promote a positive patient experience.Demonstrates commitment to safe practices, Just Culture, and As Low As Reasonably Achievable (ALARA) principles to eliminate errors and enhance patient outcomes.Performs other duties as assigned. Qualifications: EDUCATION:Required: High School Diploma or equivalentGraduate of a Radiology, Imaging or related educational programEXPERIENCE:LICENSURE/CERTIFICATION/REGISTRY/LISTING:Required: Will accept any of the following licenses:ARRT: RT(R)(CT), RT(N)(CT)NMTCB: CNMT, NMTCB(CT)Combination of ARRT RT(N) and NMTCB(CT) or CNMT and ARRT(CT)Combination of ARRT RT(R) and NMTCB(CT) or ARRT RT(T) and NMTCB(CT)BLS (CPR)-American Red Cross or AHA Healthcare Provider