FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

This Systems Engineering Supervisor will be responsible for managing the planning, design and the installation of all Sortation Equipment by Systems Engineering. Direct on-site management will be required to ensure the success of concurrent projects. This position will work side by side with Systems Programming in the development of reliable equipment that provides the most effective cost/benefit to UniFirst Corporation. The Systems Design and Installation Supervisor will report directly to the Systems Engineering Manager. List the general responsibilities and descriptions of key tasks and their purpose, relationships with customers, coworkers, and others, and the results expected of incumbent employees. Responsibilities: Budgeting, Design and Planning Perform Plant assessments and provide system recommendations for approval.Assist in the Design of Systems that will improve plant productivity, efficiency and provide for regional growth.Maintain and provide accurate records or project spending.Develop transitional plans that will allow for system installation without major impact to plant operations or UniFirst Customers.Effectively communicate to Executive and Plant ManagementSystem prerequisitesLabor demand, quantity and quality.Equipment operation and the impact on production flow.Installation timeline.Transitional difficulties. Safety Maintain safe working environment during installation for both Contractors and Plant Employees.Install systems that comply with all applicable Local and National Safety Codes.Train and promote safety in the proper use and maintenance of installed equipment.Provide documentation for all installed equipment Installation Management Effectively schedule and utilize inside/outside contractors to complete project.Coordinate resources based on UniFirst Corporation priorities.Aggressively manage project costs, without sacrificing system safety or operational effectiveness.Communicate daily and weekly expectations to contactors.Provide accurate drawings and installation details.Reduce downtime by making sure all necessary parts are on hand.Provide critical decision making to resolve design and installation conflicts.Provide Hands On Mechanical/Electrical work and Supervision to UniFirst and contractor personnel during installation of systems.Continual Improvement-System design and installationQualificationsRequirements: Hold Mechanical/Technical degree, certification or equal “On the Job” experience.Minimum 2 years experience designing and managing projects in the Industrial Conveyor/Material Handling Field.Candidate must be willing to directly managing project installation.Report for work at local Branch/Plant when not on the road.Experience with AutoCAD to develop detailed mechanical layouts/ diagrams for conveyors, sorters, and storage equipment.Experience with MS Office, Word,Excel, MS Project.Must be a team player. He/She will be a part of an overall process where interaction with other employees is essential. The candidate must enjoy having a fluid interchange of ideas and recommendations from both Engineering and Plant Management.Strong training and presentation skillsMust have strong analytical skillsExcellent verbal, leadership, Integrity and Communication skillsMust have ability to make decisions in time-sensitive situations The estimated base salary for this position ranges from $80,000.00 to $90,000.00 annually with additional management bonus eligibility. This range reflects various factors, including but not limited to the applicant's skills, qualifications, and previous work experience. Additionally, geographic differentials may apply based on the location where the position is ultimately filled, which could affect the final compensation. Benefits & Perks: 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. UniFirst is an international leader in garment & Uniform services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

This position drives security engineering solutions, framework, roadmap, program optimization, process engineering, risk remediation, and mitigation of operational risk in a high-velocity culture by introducing technology, requirements, deliverables, gaps and systems design. Analyzes competitive strategies, cyber technologies, metrics models, and performance indicators.Position Compensation Range:$111,000.00 - $190,000.00Pay Rate Type:SalaryCompensation may vary based on the job level and your geographic work location. Relocation support is offered for eligible candidates.Technical Expertise:Oversee the organization’s privileged access management systemBuild, deliver, maintain, and update technology, platform, and system solutions in the Identity and Access Management space that addresses business and technical requirements, leveraging standard policies and standardsPartners with other Technology Team members to provide advice or solutions within his or her area of expertise.Stays informed about current developments within his or her expertise.Analytical Expertise:Identifies problems, performs root cause analysis, investigates information, performs impact analysis, and formulates and executes plans to develop solutions.Identifies strengths and weaknesses of alternative solutions, conclusions, or approaches to problems.Understands and can estimate effort and value for solutionsUnderstands at a broad level how technology platforms/architectures are applied to automated business solutions.Business Knowledge:Actively engaged in industry, domain, process or technology trends, especially as it pertains to Identity & Access Management and Cybersecurity.Task Management:Acts as a coordination and facilitation point for organizing work efforts.Sets up or follows established procedures to ensure high quality of work.Understands dependency identification processes in technology work, verifies information and carefully reviews and checks the accuracy of the teams work.Establishes or follows prioritization processes to drive work and has a sense of urgency about getting work completed.Looks for and seizes opportunities to do more or to do things better.Communication:Appropriately shares ideas and information with othersPractices attentive and active listening.Ensures that regular and consistent communications take place.Expresses ideas as well as business or technical requirements clearly and concisely in writing using appropriate levels of summary and synthesis.Expresses oneself clearly in conversation and interaction with others.May perform other job duties as directed by Employee’s Leaders.Critical Skills:Excellent partnering, communication, and negotiation skills in working with various Teams and/or external partners.Able to analyze large, complex, or vague business or technical problems, articulating the problem or root cause, and translating the analysis into viable solution recommendations.Able to work effectively in a strong, business customer service and team oriented environment.Ability to manage and prioritize multiple and widely varied work streams / tasks.Able to develop, present and effectively communicate ideas and strategies to a variety of audiences.Able to teach and mentor others concerning technical and business subjects.EducationDegree in Computer Science, ComputerEngineering, Information Systems, or equivalent work experienceRequired Skills7+ years’ experience working as a senior PAM engineer or equivalent positionExperience with PAM/PUM/PM tools such as CyberArk, BeyondTrust, Delinea, and equivalent solutionsExperience with Agile Practices like Scrum, Kanban, CI, CD preferredExperience with build/tooling such as Git, Stash, Jenkins, Jira, and Confluence preferredExperience working in a team according to Agile development methodologiesMust be able to demonstrate a firm understanding of the concepts of password vaulting, privileged session management, secrets management, and DevSecOpsExperience with creating credential vaults, defining access control policies/platforms, user provisioning and entitlements, managing applications credentials, key management, and user access policy management.Ability to complete root-cause analysis on complex issuesTroubleshooting highly complex issuesStrong Knowledge of Risk and Compliance initiatives including PCI, SOX, HIPAAKnowledge of the NIST Cyber Security FrameworkPreferred Skills7+ Years of experience with other IAM disciplines such as Lifecycle Management, Directory Management, or Identity GovernanceIAM or Cybersecurity Engineering BackgroundExperience with Identity Proofing methodologiesExperience with REST/SOAP API’sHas web development experience (HTML, JSP, CSS, JavaScript, and/or PHP)Financial or insurance industry experienceRelevant certifications (e.g., CISSP, CISM, CEH) are a plus.LicensesNot Applicable.Travel RequirementUp to 10%.Physical RequirementsWork that primarily involves sitting/standing.Working ConditionsNot Applicable.We encourage you to apply even if you do not meet all of the requirements listed above. Skills can be used in many different ways, and your life and professional experience may be relevant beyond what a list of requirements will capture. We encourage those who are passionate about what we do to apply!We provide benefits that support your physical, emotional, and financial wellbeing. You will have access to comprehensive medical, dental, vision and wellbeing benefits that enable you to take care of your health. We also offer a competitive 401(k) contribution, a pension plan, an annual incentive, 9 paid holidays and a paid time off program (23 days accrued annually for full-time employees). In addition, our student loan repayment program and paid-family leave are available to support our employees and their families. Interns and contingent workers are not eligible for American Family Insurance Group benefits.We are an equal opportunity employer. It is our policy to comply with all applicable federal, state and local laws pertaining to non-discrimination, non-harassment and equal opportunity. We also consider qualified applicants with criminal histories, consistent with applicable federal, state and local law.#LI-BC2

Who we areWith its A.I.-powered robotic technology platform, Symbotic is changing the way consumer goods move through the supply chain. Intelligent software orchestrates advanced robots in a high-density, end-to-end system – reinventing warehouse automation for increased efficiency, speed and flexibility.What we needWe are looking for a Senior Embedded Software Engineer to join our Safety Technologies Software team. Your job will be to design and develop software strategies for a real-time ARM-based platform that has functional safety requirements.What we doSymbotic is building safety-critical systems leveraging advanced computer vision, robotics, and 3D sensing that will transform warehouse automation. The Safety Technologies Software teamis tasked with developing a high-performance multiprocessor computer vision system, an embedded application that interfaces with industrial robots for safety controls and monitoring, as well as an intuitive engineering application which is used to design and configure the system.What you’ll doDesign and develop software strategies for real time ARM-based platform in C that has functional safety requirements. Implement, document and maintain Linux and embedded real- time code and shell scripts (PERL, Bash, Python). Analyze failure modes as well as design redundancy and fail-safe mechanisms into the software to ensure the system always results in a safe system. Create C-based unit and integration tests that verify and validate the functionality of the embedded platform and ensure your code meets test coverage goals. Support system testing of components and subsystems. Collaborate with our hardware team, review schematics, and develop software to support peripherals on a custom hardware platform. Troubleshoot system problems in production or design by investigating issues related to product performance or production difficulties, primarily through log analysis. Support board bring-up. Participate in a rigorous review process (code and design) to ensure your software meets our quality bar. Use Git to ensure commits are well-organized and traceable to our requirement tracking system. What you’ll needAt least 8 years of professional experience developing real time embedded software and device drivers. Familiarity with networking protocols and control systems. A minimum of a Bachelor of Science in a related engineering discipline (i.e. Computer Science, Mathematics, Electrical Engineering, etc.). Experience with software process and version control tools. Strong background in Linux shell scripting (especially Python and bash), familiarity with grep, regex and parsing; and file system command line utilities. In-depth knowledge of real time or embedded operating systems (e.g.,VxWorks, FreeRTOS, SafeRTOS) and threading and communication issues related to real time operating systems (for mobile robotics or control systems would be ideal). POSIX multi-threading (thread priority, thread arbitration), synchronization mechanisms (mutexes, semaphores), shared memory, event and signal handling, and inter-process communications. Low level communication protocols and sockets implementations, UDP, TCP/IP, TCP/NFS, and related alignment and packing issues. Experience with programming and debugging for memory-constrained systems. Experience in regulated environments such as functional safety or medical devices is a plus Our EnvironmentUp to 10%travel may be required. Employees must have a valid driver’s license and the ability to drive and/or fly to client and other customer locations. The employee is responsible for owning a credit card and managing expenses personally to be reimbursed on a bi-weekly basis. #LI-EJ1#LI-HybridAbout SymboticSymbotic is an automation technology leader reimagining the supply chain with its end-to-end, AI-powered robotic and software platform. Symbotic reinvents the warehouse as a strategic asset for the world’s largest retail, wholesale, and food & beverage companies. Applying next-gen technology, high-density storage and machine learning to solve today's complex distribution challenges, Symbotic enables companies to move goods with unmatched speed, agility, accuracy and efficiency. As the backbone of commerce the Symbotic platform transforms the flow of goods and the economics of supply chain for its customers. For more information, visitwww.symbotic.com.We are a community of innovators, collaborators and pioneers who embrace our differences, because we know unique perspectives make us stronger and smarter. Every perspective matters. We depend on the collective voices of our employees, customers and community to help guide us as we build a better place to work – for you and the world. That’s why we’re proud to be an equal opportunity employer.We do not discriminate based on race, color, ethnicity, ancestry, religion, sex, national origin, sexual orientation, age, citizenship status, marital status, disability, gender identity, gender expression, veteran status, or genetic information.

ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday

This Systems Engineering Supervisor will be responsible for managing the planning, design and the installation of all Sortation Equipment by Systems Engineering. Direct on-site management will be required to ensure the success of concurrent projects. This position will work side by side with Systems Programming in the development of reliable equipment that provides the most effective cost/benefit to UniFirst Corporation. The Systems Design and Installation Supervisor will report directly to the Systems Engineering Manager. List the general responsibilities and descriptions of key tasks and their purpose, relationships with customers, coworkers, and others, and the results expected of incumbent employees. Responsibilities: Budgeting, Design and Planning Perform Plant assessments and provide system recommendations for approval.Assist in the Design of Systems that will improve plant productivity, efficiency and provide for regional growth.Maintain and provide accurate records or project spending.Develop transitional plans that will allow for system installation without major impact to plant operations or UniFirst Customers.Effectively communicate to Executive and Plant ManagementSystem prerequisitesLabor demand, quantity and quality.Equipment operation and the impact on production flow.Installation timeline.Transitional difficulties. Safety Maintain safe working environment during installation for both Contractors and Plant Employees.Install systems that comply with all applicable Local and National Safety Codes.Train and promote safety in the proper use and maintenance of installed equipment.Provide documentation for all installed equipment Installation Management Effectively schedule and utilize inside/outside contractors to complete project.Coordinate resources based on UniFirst Corporation priorities.Aggressively manage project costs, without sacrificing system safety or operational effectiveness.Communicate daily and weekly expectations to contactors.Provide accurate drawings and installation details.Reduce downtime by making sure all necessary parts are on hand.Provide critical decision making to resolve design and installation conflicts.Provide Hands On Mechanical/Electrical work and Supervision to UniFirst and contractor personnel during installation of systems.Continual Improvement-System design and installationQualificationsRequirements: Hold Mechanical/Technical degree, certification or equal “On the Job” experience.Minimum 2 years experience designing and managing projects in the Industrial Conveyor/Material Handling Field.Candidate must be willing to directly managing project installation.Report for work at local Branch/Plant when not on the road.Experience with AutoCAD to develop detailed mechanical layouts/ diagrams for conveyors, sorters, and storage equipment.Experience with MS Office, Word,Excel, MS Project.Must be a team player. He/She will be a part of an overall process where interaction with other employees is essential. The candidate must enjoy having a fluid interchange of ideas and recommendations from both Engineering and Plant Management.Strong training and presentation skillsMust have strong analytical skillsExcellent verbal, leadership, Integrity and Communication skillsMust have ability to make decisions in time-sensitive situations The estimated base salary for this position ranges from $80,000.00 to $90,000.00 annually with additional management bonus eligibility. This range reflects various factors, including but not limited to the applicant's skills, qualifications, and previous work experience. Additionally, geographic differentials may apply based on the location where the position is ultimately filled, which could affect the final compensation. Benefits & Perks: 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. UniFirst is an international leader in garment & Uniform services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Who we areWith its A.I.-powered robotic technology platform, Symbotic is changing the way consumer goods move through the supply chain. Intelligent software orchestrates advanced robots in a high-density, end-to-end system – reinventing warehouse automation for increased efficiency, speed and flexibility.What we needSymbotic is looking for a Robotics Applications Engineer to join our Perception team. You will play a hands-on role in the design and implementation of the next generation of perception software for our mobile robots. The qualified candidate will play a hands-on role helping to bring our robotics solutions to our customers. We are looking for people who thrive in a creative, collaborative and agile development environment.What we do Our work matters – robotics is transforming the world of commerce. Every day our intelligent robots are responsible for getting food and merchandise to thousands of stores across North America. We’re an industry changer – we created the first and only fully autonomous, end-to-end supply chain solution. Today, we are driving towards even bigger ideas – and we have the people, technology, and leadership to fully realize these aspirations. We have the excitement and ambition of a startup with the benefits and resources of a proven organization.What you’ll doCollaborate with internal and external stakeholders to understand technical and business requirements.Design, develop, and maintain high-quality robotics applications for internal users and external customers.Develop and integrate solutions across various modules, including web-based dashboards, database, and robotics control.Create, execute, and maintain comprehensive test plans; identify and fix bugs while ensuring the integrity of the existing codebase.Contribute to system-level software design, ensuring scalability, reliability, and performance.Formulate, document, and maintain detailed requirements specifications.Analyze requirements and develop innovative solutions or effective workarounds to meet project needs.Identify potential project risks and proactively suggest and implement mitigation strategies.Up to 10% travel may be requiredWhat you’ll needBachelor or master’s degree in Robotics, Engineering, Computer Science, or a related technical field.Minimum 8 years of professional software development experience with Python and/or C++.Experience in database development using Kafka and Snowflake.Experience in messaging systems such as RabbitMQ and/or ZeroMQHands-on experience with ROS, Docker and Linux environments.Strong problem-solving skills and attention to detail.Familiarity with robotics remote operation and control applications is a big plusExperience in developing web-based applicationsExperience with project management and collaboration tools like JIRA, Confluence.Exposure to agile development practices and CI/CD pipelines.Familiarity with graphical user interfaces (GUI) developmentKnowledge of computer vision applications and libraries.Our EnvironmentUp to 10% of travel may be required. Employees must have a valid driver’s license and the ability to drive and/or fly to client and other customer locations.The employee is responsible for owning a credit card and managing expenses personally to be reimbursed on a bi-weekly basis.#LI-JT1#LI-HybridAbout SymboticSymbotic is an automation technology leader reimagining the supply chain with its end-to-end, AI-powered robotic and software platform. Symbotic reinvents the warehouse as a strategic asset for the world’s largest retail, wholesale, and food & beverage companies. Applying next-gen technology, high-density storage and machine learning to solve today's complex distribution challenges, Symbotic enables companies to move goods with unmatched speed, agility, accuracy and efficiency. As the backbone of commerce the Symbotic platform transforms the flow of goods and the economics of supply chain for its customers. For more information, visitwww.symbotic.com.We are a community of innovators, collaborators and pioneers who embrace our differences, because we know unique perspectives make us stronger and smarter. Every perspective matters. We depend on the collective voices of our employees, customers and community to help guide us as we build a better place to work – for you and the world. That’s why we’re proud to be an equal opportunity employer.We do not discriminate based on race, color, ethnicity, ancestry, religion, sex, national origin, sexual orientation, age, citizenship status, marital status, disability, gender identity, gender expression, veteran status, or genetic information.

This Systems Engineering Supervisor will be responsible for managing the planning, design and the installation of all Sortation Equipment by Systems Engineering. Direct on-site management will be required to ensure the success of concurrent projects. This position will work side by side with Systems Programming in the development of reliable equipment that provides the most effective cost/benefit to UniFirst Corporation. The Systems Design and Installation Supervisor will report directly to the Systems Engineering Manager. List the general responsibilities and descriptions of key tasks and their purpose, relationships with customers, coworkers, and others, and the results expected of incumbent employees. Responsibilities: Budgeting, Design and Planning Perform Plant assessments and provide system recommendations for approval.Assist in the Design of Systems that will improve plant productivity, efficiency and provide for regional growth.Maintain and provide accurate records or project spending.Develop transitional plans that will allow for system installation without major impact to plant operations or UniFirst Customers.Effectively communicate to Executive and Plant ManagementSystem prerequisitesLabor demand, quantity and quality.Equipment operation and the impact on production flow.Installation timeline.Transitional difficulties. Safety Maintain safe working environment during installation for both Contractors and Plant Employees.Install systems that comply with all applicable Local and National Safety Codes.Train and promote safety in the proper use and maintenance of installed equipment.Provide documentation for all installed equipment Installation Management Effectively schedule and utilize inside/outside contractors to complete project.Coordinate resources based on UniFirst Corporation priorities.Aggressively manage project costs, without sacrificing system safety or operational effectiveness.Communicate daily and weekly expectations to contactors.Provide accurate drawings and installation details.Reduce downtime by making sure all necessary parts are on hand.Provide critical decision making to resolve design and installation conflicts.Provide Hands On Mechanical/Electrical work and Supervision to UniFirst and contractor personnel during installation of systems.Continual Improvement-System design and installationQualificationsRequirements: Hold Mechanical/Technical degree, certification or equal “On the Job” experience.Minimum 2 years experience designing and managing projects in the Industrial Conveyor/Material Handling Field.Candidate must be willing to directly managing project installation.Report for work at local Branch/Plant when not on the road.Experience with AutoCAD to develop detailed mechanical layouts/ diagrams for conveyors, sorters, and storage equipment.Experience with MS Office, Word,Excel, MS Project.Must be a team player. He/She will be a part of an overall process where interaction with other employees is essential. The candidate must enjoy having a fluid interchange of ideas and recommendations from both Engineering and Plant Management.Strong training and presentation skillsMust have strong analytical skillsExcellent verbal, leadership, Integrity and Communication skillsMust have ability to make decisions in time-sensitive situations The estimated base salary for this position ranges from $80,000.00 to $90,000.00 annually with additional management bonus eligibility. This range reflects various factors, including but not limited to the applicant's skills, qualifications, and previous work experience. Additionally, geographic differentials may apply based on the location where the position is ultimately filled, which could affect the final compensation. Benefits & Perks: 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. UniFirst is an international leader in garment & Uniform services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

PREVENTING ENVIRONMENTAL HARMWe go to extraordinary measures to protect our Airmen from environmental hazards and infractions. Applying engineering and scientific principles, Bioenvironmental Engineers identify and evaluate potential dangers and develop programs to prevent illness and injury. With an emphasis on discovering problems before they occur, these specialists ensure the health and safety of Airmen and their families in environments all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor of Science in engineering from an ABET-accredited institutionQualificationsCompletion of qualifying Bioenvironmental Engineering courseMinimum of 24 months of experience in bioenvironmental engineering assignmentsCompletion of Officer Training School courseMust be between the ages of 18 and have not reached your 42ndbirthday

Who we areWith its A.I.-powered robotic technology platform, Symbotic is changing the way consumer goods move through the supply chain. Intelligent software orchestrates advanced robots in a high-density, end-to-end system – reinventing warehouse automation for increased efficiency, speed and flexibility.What we needWe are looking for an Advanced Computer Vision Software Engineer to join our Safety Technologies Software Team. Your job will be to develop novel methods of robotic perception that meet real-world reliability requirements. You’ll use 3D camera data to help robots see the humans and workpieces they need to interact with and develop tools to visualize and interact with 3D scenes.What we doSymbotic is building safety-critical systems leveraging advanced computer vision, robotics, and 3D sensing that will transform warehouse automation. The Safety Technologies Software teamis tasked with developing a high-performance multiprocessor computer vision system, an embedded application that interfaces with industrial robots for safety controls and monitoring, as well as an intuitive engineering application which is used to design and configure the system.What you’ll doParticipate in the development of software solutions for vision applications including user interfaces, processing algorithms, mathematical modeling, machine learning.Develop highly reliable C++ and Python software to implement 3D vision algorithms such as registration, object classification and tracking, and 3D reconstructionParticipate in the hardware design of computer vision solutions, including:System design and componentselection (2D and 3D cameras, lighting system, lasers, etc.)Development of prototypesValidation of prototypes in our Vision Lab and in our Test CenterOn Site Support of our Vision SystemsDocumentation and preparation for productionPlanning and development of test benches for quality assuranceDevelop both internal and external tools to visualize, analyze and interact with 3D informationSupport for our actual Vision Systems on-siteWhat you’ll needBachelor's degree in Computer Engineering, Electrical Engineering, Computer Science, Physics or equivalent.Minimum 5 years of professional experience developing software applications.Strong experience with C++ and Python programming languagesStrong skills in programming and algorithm design and a strong desire to develop computer vision or computer graphicsKnowledge of image/signal processing techniques and/or machine learningRelevant experience in the development of computer vision systemsRelevant experience with robots (an asset)Comfortable following a structured software development process required for functional safety certification, including development of rigorous unit and systems testsOur EnvironmentUp to 10% travel may be required. Employees must have a valid driver’s license and the ability to drive and/or fly to client and other customer locations. The employee is responsible for owning a credit card and managing expenses personally to be reimbursed on a bi-weekly basis. #LI-Hybrid#LI-EJ1About SymboticSymbotic is an automation technology leader reimagining the supply chain with its end-to-end, AI-powered robotic and software platform. Symbotic reinvents the warehouse as a strategic asset for the world’s largest retail, wholesale, and food & beverage companies. Applying next-gen technology, high-density storage and machine learning to solve today's complex distribution challenges, Symbotic enables companies to move goods with unmatched speed, agility, accuracy and efficiency. As the backbone of commerce the Symbotic platform transforms the flow of goods and the economics of supply chain for its customers. For more information, visitwww.symbotic.com.We are a community of innovators, collaborators and pioneers who embrace our differences, because we know unique perspectives make us stronger and smarter. Every perspective matters. We depend on the collective voices of our employees, customers and community to help guide us as we build a better place to work – for you and the world. That’s why we’re proud to be an equal opportunity employer.We do not discriminate based on race, color, ethnicity, ancestry, religion, sex, national origin, sexual orientation, age, citizenship status, marital status, disability, gender identity, gender expression, veteran status, or genetic information.

This Systems Engineering Supervisor will be responsible for managing the planning, design and the installation of all Sortation Equipment by Systems Engineering. Direct on-site management will be required to ensure the success of concurrent projects. This position will work side by side with Systems Programming in the development of reliable equipment that provides the most effective cost/benefit to UniFirst Corporation. The Systems Design and Installation Supervisor will report directly to the Systems Engineering Manager. List the general responsibilities and descriptions of key tasks and their purpose, relationships with customers, coworkers, and others, and the results expected of incumbent employees. Responsibilities: Budgeting, Design and Planning Perform Plant assessments and provide system recommendations for approval.Assist in the Design of Systems that will improve plant productivity, efficiency and provide for regional growth.Maintain and provide accurate records or project spending.Develop transitional plans that will allow for system installation without major impact to plant operations or UniFirst Customers.Effectively communicate to Executive and Plant ManagementSystem prerequisitesLabor demand, quantity and quality.Equipment operation and the impact on production flow.Installation timeline.Transitional difficulties. Safety Maintain safe working environment during installation for both Contractors and Plant Employees.Install systems that comply with all applicable Local and National Safety Codes.Train and promote safety in the proper use and maintenance of installed equipment.Provide documentation for all installed equipment Installation Management Effectively schedule and utilize inside/outside contractors to complete project.Coordinate resources based on UniFirst Corporation priorities.Aggressively manage project costs, without sacrificing system safety or operational effectiveness.Communicate daily and weekly expectations to contactors.Provide accurate drawings and installation details.Reduce downtime by making sure all necessary parts are on hand.Provide critical decision making to resolve design and installation conflicts.Provide Hands On Mechanical/Electrical work and Supervision to UniFirst and contractor personnel during installation of systems.Continual Improvement-System design and installationQualificationsRequirements: Hold Mechanical/Technical degree, certification or equal “On the Job” experience.Minimum 2 years experience designing and managing projects in the Industrial Conveyor/Material Handling Field.Candidate must be willing to directly managing project installation.Report for work at local Branch/Plant when not on the road.Experience with AutoCAD to develop detailed mechanical layouts/ diagrams for conveyors, sorters, and storage equipment.Experience with MS Office, Word,Excel, MS Project.Must be a team player. He/She will be a part of an overall process where interaction with other employees is essential. The candidate must enjoy having a fluid interchange of ideas and recommendations from both Engineering and Plant Management.Strong training and presentation skillsMust have strong analytical skillsExcellent verbal, leadership, Integrity and Communication skillsMust have ability to make decisions in time-sensitive situations The estimated base salary for this position ranges from $80,000.00 to $90,000.00 annually with additional management bonus eligibility. This range reflects various factors, including but not limited to the applicant's skills, qualifications, and previous work experience. Additionally, geographic differentials may apply based on the location where the position is ultimately filled, which could affect the final compensation. Benefits & Perks: 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. UniFirst is an international leader in garment & Uniform services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

This Systems Engineering Supervisor will be responsible for managing the planning, design and the installation of all Sortation Equipment by Systems Engineering. Direct on-site management will be required to ensure the success of concurrent projects. This position will work side by side with Systems Programming in the development of reliable equipment that provides the most effective cost/benefit to UniFirst Corporation. The Systems Design and Installation Supervisor will report directly to the Systems Engineering Manager. List the general responsibilities and descriptions of key tasks and their purpose, relationships with customers, coworkers, and others, and the results expected of incumbent employees. Responsibilities: Budgeting, Design and Planning Perform Plant assessments and provide system recommendations for approval.Assist in the Design of Systems that will improve plant productivity, efficiency and provide for regional growth.Maintain and provide accurate records or project spending.Develop transitional plans that will allow for system installation without major impact to plant operations or UniFirst Customers.Effectively communicate to Executive and Plant ManagementSystem prerequisitesLabor demand, quantity and quality.Equipment operation and the impact on production flow.Installation timeline.Transitional difficulties. Safety Maintain safe working environment during installation for both Contractors and Plant Employees.Install systems that comply with all applicable Local and National Safety Codes.Train and promote safety in the proper use and maintenance of installed equipment.Provide documentation for all installed equipment Installation Management Effectively schedule and utilize inside/outside contractors to complete project.Coordinate resources based on UniFirst Corporation priorities.Aggressively manage project costs, without sacrificing system safety or operational effectiveness.Communicate daily and weekly expectations to contactors.Provide accurate drawings and installation details.Reduce downtime by making sure all necessary parts are on hand.Provide critical decision making to resolve design and installation conflicts.Provide Hands On Mechanical/Electrical work and Supervision to UniFirst and contractor personnel during installation of systems.Continual Improvement-System design and installationQualificationsRequirements: Hold Mechanical/Technical degree, certification or equal “On the Job” experience.Minimum 2 years experience designing and managing projects in the Industrial Conveyor/Material Handling Field.Candidate must be willing to directly managing project installation.Report for work at local Branch/Plant when not on the road.Experience with AutoCAD to develop detailed mechanical layouts/ diagrams for conveyors, sorters, and storage equipment.Experience with MS Office, Word,Excel, MS Project.Must be a team player. He/She will be a part of an overall process where interaction with other employees is essential. The candidate must enjoy having a fluid interchange of ideas and recommendations from both Engineering and Plant Management.Strong training and presentation skillsMust have strong analytical skillsExcellent verbal, leadership, Integrity and Communication skillsMust have ability to make decisions in time-sensitive situations The estimated base salary for this position ranges from $80,000.00 to $90,000.00 annually with additional management bonus eligibility. This range reflects various factors, including but not limited to the applicant's skills, qualifications, and previous work experience. Additionally, geographic differentials may apply based on the location where the position is ultimately filled, which could affect the final compensation. Benefits & Perks: 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. UniFirst is an international leader in garment & Uniform services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Information Security is crucial at UniFirst and is part of a broader Information Governance, Risk, and Compliance program within IT. The Senior Information Security Engineer will be a key factor in leveraging the current implemented security technologies and enhancing related processes and procedures. The Senior Information Security Engineer is responsible for discovering, evaluating, and delivering security technologies to protect all sensitive information. The Senior Information Security Engineer will provide technical knowledge and analysis to include applications, operating systems, vendor risk management, incident response and security awareness and training. Responsibilities: Contribute to the implementation of UniFirst’s security controls environmentProvide consultation for configuration of technologies managed by IT InfrastructureMaintain and continuously improve the security incident response planHelping with the resolution of security incidents and determining root causeEstablish baselines and monitor/report on trends and anomaliesActs as a principal resource for escalated security incidents and responseWork together with all teams to fine-tune infrastructure/application/database protection and provide input for secure software developmentConduct examinations of system logs, applications, and networks security eventsSupport IT Operations Control Center teamProviding security support for application and infrastructure related projectsConducting Security Risk Assessments on new and existing technologiesPartner in the vulnerability management programWill be a critical partner in driving an improved overall security postureQualificationsRequirements: Bachelor’s degree in Computer ScienceInformation Systems, or related discipline preferred or equivalent job experienceCISSP certification(s) preferred.Must have 5+ years of experience as a Security EngineerFamiliar with security related frameworks including CIS18, NIST and PCIExperience with Incident Management programsExperience in intrusion detection and analysisKnowledge of SPLUNK, Nessus, Email gateway, O365, and Palo Alto technologiesExperience monitoring, investigating, and solving IT security related concernsStrong interpersonal skills including strong written and oral communication skillsExperience with building & managing user awareness training programsAbility to multi-task and balance priorities Benefits & Perks: 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. UniFirst is an international leader in garment & Uniform services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

This position will be responsible for directly overseeing installation and repairs of the Wastewater Systems and equipment as well as audit and improve operations at locations. This position will also be required to learn how to design and suggest system layouts based on plant needs. This position will handle all personnel and material logistics necessary to complete the project. Personal “hands-on” labor will be required to assist and expedite mechanical and electrical repairs. The Project Tech will report directly to the Systems Engineering Director as well as the Environmental System Supervisor. Responsibilities: Effectively schedule and utilize inside/outside contractors to complete project assigned.Coordinate resources based on UniFirst Corporation priorities.Identify deficient equipment both mechanical and electrical. Order parts needed for repairs and with the help of the location staff make needed repairsCommunicate with location on what repairs are needed and how to prevent failures in the system.Provide accurate prints of system layout, P&ID and electrical changes made when repairing system.Reduce downtime by making sure all necessary parts are on hand.Provide critical decision making to resolve design and installation conflicts.Provide Hands On Mechanical/Electrical work and Supervision to UniFirst and contractor personnel during installation of wastewater systems.Continual Improvement-System design and installationQualificationsRequirements: Hold Mechanical/Technical degree, certification or equal “On the Job” experience.Minimum 2 years experience in the Industrial Environmental Field.Experience with MS Office, Word,Excel, MS Project.Experience or ability to learn AutoCAD to develop detailed mechanical layouts/ diagrams for WW Facilty layouts to include equipment placement, piping and electrical layouts.Experience with Electrical systems to include 460V, 240/208V, 120V as well as 24VDCExperience with mechanical systems, including Pumps, Mixers and Piping systems.Candidate must be willing to travel up to 70%, directly managing project installation.Work a 10 day ON-4 day OFF schedule when necessary to manage project installation.Must be a team player. He/She will be a part of an overall process where interaction with other employees is essential. The candidate must enjoy having a fluid interchange of ideas and recommendations from both Engineering and Plant ManagementMaintain safe working environment during installation for both Contractors and Plant Employees. The estimated salary for this position ranges from $80,000.00 to $90,000.00 annually. This range reflects various factors, including but not limited to the applicant's skills, qualifications, and previous work experience. Additionally, geographic differentials may apply based on the location where the position is ultimately filled, which could affect the final compensation. Benefits & Perks: 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. UniFirst is an international leader in garment & Uniform services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws