FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Markem-Imaje is a trusted world manufacturer of product identification and traceability solutions, offering a full line of reliable and innovative inkjets, thermal transfer, laser, print and apply label systems. Markem-Imaje delivers fully integrated solutions that enable product quality and safety, regulatory and retailer compliance, better product recalls and improved manufacturing processes.Dover is a diversified global manufacturer with annual revenue of over $8 billion. We deliver innovative equipment and components, specialty systems, consumable supplies, software and digital solutions, and support services through five operating segments: Engineered Products, Fueling Solutions, Imaging & Identification, Pumps & Process Solutions and Refrigeration & Food Equipment.Headquartered in Downers Grove, Illinois, Dover trades on the New York Stock Exchange under "DOV." Additional information is available at dovercorporation.com.The Role:Working in a team-oriented workplace, Electrical Engineer IV will effectively apply electronic skills to perform activities concerned with analysis, design, testing/troubleshooting and manufacturing of products/systems including the application of these products/systems to commercial, industrial and scientific uses. As required by the business, works closely with other engineering disciplines in the development and application of products/systems or services.Job Responsibilities:• An excellent understanding of the Customer’s requirements, expectations, and application environment as it relates to product/system performance is required.• Execution of Customer requirements/expectations into product variations/enhancements or a new product idea is expected.• Collaboration and teamwork with other functional departments such as Reliability, Value Stream, Manufacturing Engineering, Test Engineering, GPS, Tech Service, Depot Centers, Sourcing, Business Centers, Product Management, etc., is required to ensure product/system performance objectives are met.• Timely resolution of product/system issues that affect MI’s internal and external Customers, which may involve engineering research, redesign, test & validation, documentation and communication is expected.• Responsible for all phases of product development including the specification, design, component selection, implementation, verification and validation of products and services. May provide technical leadership to a small group of assigned engineers and technicians.• Principle responsibility/ownership in the development of new electronic circuits or systems.• Proficient in the use of computer-assisted engineering and design software/equipment such as ECAD to perform assignments which include schematic capture and circuit simulation.• Recommend complex components, architectural systems and equipment based on analysis of specifications and reliability. May also review vendor capability and make recommendations to support product development.• Determine, plan and execute design approaches and parameters through the research, assimilation and application of new technology, utilizing creative problem-solving skills such as DOE/FMEA in order to develop new electrical analysis methods.• Remain current with a variety of the field's concepts, practices, and procedures.• Principle responsibility/ownership towards the continuous improvement efforts within the R&D community.• Perform, guide or lead complex electrical design functions associated with new product development. Comfortable working with and/or directing the mechanical, chemical, and electromechanical aspects of project.• Collaborate with and direct other engineers/peers in the acquisition, analysis and verification of electrical performance to specification through simulation and measurement. (E.g. power factors, electronic architecture timing, I/O, User Interface, communication ports, etc.).• Ensure successful completion of the assigned project/task within the budgeted time and cost constraints.• Participate in key account relationships involving requirements definitions, special applications/designs, and validation through field testing.• Work closely with local business/technical centers, sales and service representatives in order to generate revenue generation opportunities.• Identify new and/or works with existing suppliers and subcontractors on specifications, designs, schedules, etc. in the support of projects and production equipment. Coordinate key account relationships involving requirements definitions, special applications/designs, and validation through field testing.• Coordinate, lead and/or participate in design review meetings and associated activities.• Actively participates in the annual business planning sessions related to Electrical R&D.• Maintain laboratory notebooks in accordance with requirements of research/ design/development process.• Travel and/or interfacing with Customers, Business Centers is expected and encouraged.• Perform other related duties as assigned by management.Job Requirements:• Master’s Degree with a minimum of 8 years of experience in a related field or a Bachelor’s Degree with 10 years of experience.• On-going, advanced coursework in Electrical/Electronic Engineering required.• 10+ years of experience developing PCBAs.• Demonstrated ability to design and enter schematics (Altium a plus) and a superior knowledge and experience of digital, embedded CPU and analog circuits.• FPGA and/or C programming skills a plus.• The candidate should be able to develop their assignments will minimal direction as well as functional as part of a cross-functional and international product development team.• Mentoring and leadership of less experienced personnel in an agile environment.• Expertise in more than one of the following is required: system design, analog and digital circuit design, solid state power electronics and power conversion, microprocessor and digital signal processor, software, local area networks, wireless communications, data logging, and electromechanical devices.• Complex analog and digital design capability that includes expertise with low- and high-density integrated circuits, microprocessors/microcontrollers, motor controllers, display drivers, communication drivers, input/output devices, power supply circuits/conditioning, wiring diagrams and cable management. Experience with architectural design/manufacturing that includes VHDL, FPGA, CPLD, BGA and SMT.• Expertise with PCB design, testing, analysis and validation required.• Expertise with EMI/EMC design, testing techniques and Agency certification practices required.• Programming knowledge of C++ is preferred.• Proven track record of success for designing, implementing and manufacturing reliable product designs.• Expert use of test equipment/apparatus, computer-assisted engineering and design software, circuit board processes, etc.• Expertise with the use of ECAD for schematic capture and circuit simulation, oscilloscopes, DMM’s, logic/spectrum analyzers, signal generators and data logging equipment.• Expertise utilizing Design of Experiments (DOE) methodology is required.• Proficient knowledge of common software programs, including Word and Excel.• Strong leadership, Customer, interpersonal communication and mentoring skills a must.• Demonstrated aptitude in Engineering Excellence: FMEA, DFT, DFM, Root Cause Analysis, Design of Experiments, etc.The right candidate will be aligned to our values and culture: • Collaborative entrepreneurial spirit • Winning through customers • High ethical standards, openness and trust • Expectations for results • Respect and value peopleIf you believe you match our values and have the experience we’re looking for, apply! We can’t wait to hear from you!Work Arrangement: Onsite Salary Range: $150,000.00 - $170,000.00 We consider several job-related, non-discriminatory factors when determining the pay rate for a position, including, but not limited to, the position’s responsibilities, a candidate’s work experience, a candidate’s education/training, the position’s location, and the key skills needed for the position. Pay is one of the Total Rewards that we provide to compensate and recognize employees for their work.All qualified applicants will receive consideration for employment without discrimination based on race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other factors prohibited by law.Attention Applicants: If you are an individual with a disability and require reasonable accommodation to complete any part of the application process, please let us know. Likewise, if you are limited in the ability to access or use this online application process and need an alternative method for applying, we will determine an alternate way for you to apply. Please contact for assistance with an accommodation. Kindly specify Job Requisition Number / Job Title and Location in response.Job Function:

This Systems Engineering Supervisor will be responsible for managing the planning, design and the installation of all Sortation Equipment by Systems Engineering. Direct on-site management will be required to ensure the success of concurrent projects. This position will work side by side with Systems Programming in the development of reliable equipment that provides the most effective cost/benefit to UniFirst Corporation. The Systems Design and Installation Supervisor will report directly to the Systems Engineering Manager. List the general responsibilities and descriptions of key tasks and their purpose, relationships with customers, coworkers, and others, and the results expected of incumbent employees. Responsibilities: Budgeting, Design and Planning Perform Plant assessments and provide system recommendations for approval.Assist in the Design of Systems that will improve plant productivity, efficiency and provide for regional growth.Maintain and provide accurate records or project spending.Develop transitional plans that will allow for system installation without major impact to plant operations or UniFirst Customers.Effectively communicate to Executive and Plant ManagementSystem prerequisitesLabor demand, quantity and quality.Equipment operation and the impact on production flow.Installation timeline.Transitional difficulties. Safety Maintain safe working environment during installation for both Contractors and Plant Employees.Install systems that comply with all applicable Local and National Safety Codes.Train and promote safety in the proper use and maintenance of installed equipment.Provide documentation for all installed equipment Installation Management Effectively schedule and utilize inside/outside contractors to complete project.Coordinate resources based on UniFirst Corporation priorities.Aggressively manage project costs, without sacrificing system safety or operational effectiveness.Communicate daily and weekly expectations to contactors.Provide accurate drawings and installation details.Reduce downtime by making sure all necessary parts are on hand.Provide critical decision making to resolve design and installation conflicts.Provide Hands On Mechanical/Electrical work and Supervision to UniFirst and contractor personnel during installation of systems.Continual Improvement-System design and installationQualificationsRequirements: Hold Mechanical/Technical degree, certification or equal “On the Job” experience.Minimum 2 years experience designing and managing projects in the Industrial Conveyor/Material Handling Field.Candidate must be willing to directly managing project installation.Report for work at local Branch/Plant when not on the road.Experience with AutoCAD to develop detailed mechanical layouts/ diagrams for conveyors, sorters, and storage equipment.Experience with MS Office, Word,Excel, MS Project.Must be a team player. He/She will be a part of an overall process where interaction with other employees is essential. The candidate must enjoy having a fluid interchange of ideas and recommendations from both Engineering and Plant Management.Strong training and presentation skillsMust have strong analytical skillsExcellent verbal, leadership, Integrity and Communication skillsMust have ability to make decisions in time-sensitive situations The estimated base salary for this position ranges from $80,000.00 to $90,000.00 annually with additional management bonus eligibility. This range reflects various factors, including but not limited to the applicant's skills, qualifications, and previous work experience. Additionally, geographic differentials may apply based on the location where the position is ultimately filled, which could affect the final compensation. Benefits & Perks: 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. UniFirst is an international leader in garment & Uniform services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Role Overview: Lifesaving technology, powered by you. Your expertise impacts the lives of others!Sodexo is seeking anImaging Service Engineer 2forLowell General Hospitalan acute care hospital inLowell, MA.Under supervision this person will inspect, repair, maintain, and calibrate basic diagnostic imaging equipment, devices, systems, and instruments. As well as Interact with other clinical health providers in the identification of technology-based problems. What You'll Do: ensure all medical equipment is maintained in a quality and timely mannerrepairing, maintaining and calibrating medical imaging devices; in a hospital or healthcare setting ability to make decisions regarding troubleshooting and repairing medical imaging devices specific experience with the following medical devices or equipment: DiCom, Siemens, Toshiba, Philips, GE Healthcare, XRay, Ultrasound, C-Arm, Cat Scan, MRI/CT, Radiation Therapy, Nuclear Medicine, Wet or Dry Processor, General RF, Clinical Asset Management, Accelerators. What We Offer: Compensation is fair and equitable, partially determined by a candidate's education level or years of relevant experience. Salary offers are based on a candidate's specific criteria, like experience, skills, education, and training. Sodexo offers a comprehensive benefits package that may include:Medical, Dental, Vision Care and Wellness Programs401(k) Plan with Matching ContributionsPaid Time Off and Company HolidaysCareer Growth Opportunities and Tuition ReimbursementMore extensive information is provided to new employees upon hire. What You Bring: experience repairing, maintaining and calibrating medical devices.experience in a hospital or healthcare setting. ability to make decisions regarding troubleshooting and repairing medical devices.excellent communication, customer service and time management skills.specific experience with the following medical devices or equipment: sterilizers, vents, dialysis, pumps, anesthesia, monitors, general biomedical equipment Who We Are: At Sodexo, our purpose is to create a better everyday for everyone and build a better life for all. We believe in improving the quality of life for those we serve and contributing to the economic, social, and environmental progress in the communities where we operate. Sodexo partners with clients to provide a truly memorable experience for both customers and employees alike. We do this by providing food service, catering, facilities management, and other integrated solutions worldwide.Our company values you for you; you will be treated fairly and with respect, and you can be yourself. You will have your ideas count and your opinions heard because we can be a stronger team when you’re happy at work. This is why we embrace diversity and inclusion as core values, fostering an environment where all employees are valued and respected. We are committed to providing equal employment opportunities to individuals regardless of race, color, religion, national origin, age, sex, gender identity, pregnancy, disability, sexual orientation, military status, protected veteran status, or any other characteristic protected by applicable federal, state, or local law. If you need assistance with the application process, please complete this form. Qualifications & Requirements: Minimum Education Requirement - Associate's Degree (or equivalent experience) in electronic, biomedical engineering or a discipline geared toward managing maintaining and repairing clinical equipment within a healthcare environmentMinimum Functional Experience - 5 years of imaging equipment repair and maintenance within a healthcare environment and/or entry level of formalized training and/or equivalent military training

Build your best future with the Johnson Controls TeamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away! What we offerCompetitive salary starting at $56k base plus guaranteed commission and sign-on bonus with total compensation of $83kPaid vacation/holidays/sick time – 15 days of vacation, 5 sick days, 3 floating holidaysComprehensive benefits package including but not limited to; 401k, Medical, Dental and Vision care – Available day oneEncouraging and collaborative team environmentCheck us Out: A Day in a Life at Johnson Controls | Sales Roles - YouTubeWhat you will doOur Early CareerSales Engineering (BEST) Program is a 6-month technical sales development program for Recent College Graduates that focuses on creating market share by strategic selling Johnson Controls’ HVAC products and services to commercial customers. In this program you will have a chance to apply your technical engineering knowledge and business acumen to work with customers to better understand their product and project needs by being the subject matter expert. As part of the program, you will participate in a 6-month training and development program combining classroom, field orientation, and on the job training. You will learn our mechanical equipment and service offerings, customer relationship techniques and leadership skills in preparation for supporting customers in your territory alongside the sales team. You will be prepared to consult with architects, engineers, and building owners on product selections; partner with and learn from internal experts and deliver on business goals. You will be a critical part of a local sales team and a national network of sales professionals. #BEST How you will do itEstimate job bids and prepare proposals with contractors, architects and building owners Coordinate with vendors and subcontractors Complete sales calls to generate new business and build on existing relationships Present solutions to customers for consideration Collect and analyze market intelligence Turn projects over to operations team for execution and installationsWhat we look forRequired:Currently pursuing a Bachelor’s degree in a technical field (engineering, construction management, IT etc.) and graduating in December 2024 and May/June 2025. Program starts January 6, 2025 or June 9, 2025Strong analytical ability to solve problems and ability to learn quickly Ability to manage multiple projects and cross-functional teams with minimum guidance Strong communication and teamwork skills U.S. Citizenship or Permanent ResidencyPreferred:Electrical or Mechanical Engineering Degree, strongly preferred Previous sales, engineering or business experiences through co-ops, internships, part-time or full-time jobs

Who we areWith its A.I.-powered robotic technology platform, Symbotic is changing the way consumer goods move through the supply chain. Intelligent software orchestrates advanced robots in a high-density, end-to-end system – reinventing warehouse automation for increased efficiency, speed and flexibility.What we needSymbotic is looking for a Robotics Applications Engineer to join our Perception team. You will play a hands-on role in the design and implementation of the next generation of perception software for our mobile robots. The qualified candidate will play a hands-on role helping to bring our robotics solutions to our customers. We are looking for people who thrive in a creative, collaborative and agile development environment.What we do Our work matters – robotics is transforming the world of commerce. Every day our intelligent robots are responsible for getting food and merchandise to thousands of stores across North America. We’re an industry changer – we created the first and only fully autonomous, end-to-end supply chain solution. Today, we are driving towards even bigger ideas – and we have the people, technology, and leadership to fully realize these aspirations. We have the excitement and ambition of a startup with the benefits and resources of a proven organization.What you’ll doCollaborate with internal and external stakeholders to understand technical and business requirements.Design, develop, and maintain high-quality robotics applications for internal users and external customers.Develop and integrate solutions across various modules, including web-based dashboards, database, and robotics control.Create, execute, and maintain comprehensive test plans; identify and fix bugs while ensuring the integrity of the existing codebase.Contribute to system-level software design, ensuring scalability, reliability, and performance.Formulate, document, and maintain detailed requirements specifications.Analyze requirements and develop innovative solutions or effective workarounds to meet project needs.Identify potential project risks and proactively suggest and implement mitigation strategies.Up to 10% travel may be requiredWhat you’ll needBachelor or master’s degree in Robotics, Engineering, Computer Science, or a related technical field.Minimum 8 years of professional software development experience with Python and/or C++.Experience in database development using Kafka and Snowflake.Experience in messaging systems such as RabbitMQ and/or ZeroMQHands-on experience with ROS, Docker and Linux environments.Strong problem-solving skills and attention to detail.Familiarity with robotics remote operation and control applications is a big plusExperience in developing web-based applicationsExperience with project management and collaboration tools like JIRA, Confluence.Exposure to agile development practices and CI/CD pipelines.Familiarity with graphical user interfaces (GUI) developmentKnowledge of computer vision applications and libraries.Our EnvironmentUp to 10% of travel may be required. Employees must have a valid driver’s license and the ability to drive and/or fly to client and other customer locations.The employee is responsible for owning a credit card and managing expenses personally to be reimbursed on a bi-weekly basis.#LI-JT1#LI-HybridAbout SymboticSymbotic is an automation technology leader reimagining the supply chain with its end-to-end, AI-powered robotic and software platform. Symbotic reinvents the warehouse as a strategic asset for the world’s largest retail, wholesale, and food & beverage companies. Applying next-gen technology, high-density storage and machine learning to solve today's complex distribution challenges, Symbotic enables companies to move goods with unmatched speed, agility, accuracy and efficiency. As the backbone of commerce the Symbotic platform transforms the flow of goods and the economics of supply chain for its customers. For more information, visitwww.symbotic.com.We are a community of innovators, collaborators and pioneers who embrace our differences, because we know unique perspectives make us stronger and smarter. Every perspective matters. We depend on the collective voices of our employees, customers and community to help guide us as we build a better place to work – for you and the world. That’s why we’re proud to be an equal opportunity employer.We do not discriminate based on race, color, ethnicity, ancestry, religion, sex, national origin, sexual orientation, age, citizenship status, marital status, disability, gender identity, gender expression, veteran status, or genetic information.

ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday

This Systems Engineering Supervisor will be responsible for managing the planning, design and the installation of all Sortation Equipment by Systems Engineering. Direct on-site management will be required to ensure the success of concurrent projects. This position will work side by side with Systems Programming in the development of reliable equipment that provides the most effective cost/benefit to UniFirst Corporation. The Systems Design and Installation Supervisor will report directly to the Systems Engineering Manager. List the general responsibilities and descriptions of key tasks and their purpose, relationships with customers, coworkers, and others, and the results expected of incumbent employees. Responsibilities: Budgeting, Design and Planning Perform Plant assessments and provide system recommendations for approval.Assist in the Design of Systems that will improve plant productivity, efficiency and provide for regional growth.Maintain and provide accurate records or project spending.Develop transitional plans that will allow for system installation without major impact to plant operations or UniFirst Customers.Effectively communicate to Executive and Plant ManagementSystem prerequisitesLabor demand, quantity and quality.Equipment operation and the impact on production flow.Installation timeline.Transitional difficulties. Safety Maintain safe working environment during installation for both Contractors and Plant Employees.Install systems that comply with all applicable Local and National Safety Codes.Train and promote safety in the proper use and maintenance of installed equipment.Provide documentation for all installed equipment Installation Management Effectively schedule and utilize inside/outside contractors to complete project.Coordinate resources based on UniFirst Corporation priorities.Aggressively manage project costs, without sacrificing system safety or operational effectiveness.Communicate daily and weekly expectations to contactors.Provide accurate drawings and installation details.Reduce downtime by making sure all necessary parts are on hand.Provide critical decision making to resolve design and installation conflicts.Provide Hands On Mechanical/Electrical work and Supervision to UniFirst and contractor personnel during installation of systems.Continual Improvement-System design and installationQualificationsRequirements: Hold Mechanical/Technical degree, certification or equal “On the Job” experience.Minimum 2 years experience designing and managing projects in the Industrial Conveyor/Material Handling Field.Candidate must be willing to directly managing project installation.Report for work at local Branch/Plant when not on the road.Experience with AutoCAD to develop detailed mechanical layouts/ diagrams for conveyors, sorters, and storage equipment.Experience with MS Office, Word,Excel, MS Project.Must be a team player. He/She will be a part of an overall process where interaction with other employees is essential. The candidate must enjoy having a fluid interchange of ideas and recommendations from both Engineering and Plant Management.Strong training and presentation skillsMust have strong analytical skillsExcellent verbal, leadership, Integrity and Communication skillsMust have ability to make decisions in time-sensitive situations The estimated base salary for this position ranges from $80,000.00 to $90,000.00 annually with additional management bonus eligibility. This range reflects various factors, including but not limited to the applicant's skills, qualifications, and previous work experience. Additionally, geographic differentials may apply based on the location where the position is ultimately filled, which could affect the final compensation. Benefits & Perks: 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. UniFirst is an international leader in garment & Uniform services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

This Systems Engineering Supervisor will be responsible for managing the planning, design and the installation of all Sortation Equipment by Systems Engineering. Direct on-site management will be required to ensure the success of concurrent projects. This position will work side by side with Systems Programming in the development of reliable equipment that provides the most effective cost/benefit to UniFirst Corporation. The Systems Design and Installation Supervisor will report directly to the Systems Engineering Manager. List the general responsibilities and descriptions of key tasks and their purpose, relationships with customers, coworkers, and others, and the results expected of incumbent employees. Responsibilities: Budgeting, Design and Planning Perform Plant assessments and provide system recommendations for approval.Assist in the Design of Systems that will improve plant productivity, efficiency and provide for regional growth.Maintain and provide accurate records or project spending.Develop transitional plans that will allow for system installation without major impact to plant operations or UniFirst Customers.Effectively communicate to Executive and Plant ManagementSystem prerequisitesLabor demand, quantity and quality.Equipment operation and the impact on production flow.Installation timeline.Transitional difficulties. Safety Maintain safe working environment during installation for both Contractors and Plant Employees.Install systems that comply with all applicable Local and National Safety Codes.Train and promote safety in the proper use and maintenance of installed equipment.Provide documentation for all installed equipment Installation Management Effectively schedule and utilize inside/outside contractors to complete project.Coordinate resources based on UniFirst Corporation priorities.Aggressively manage project costs, without sacrificing system safety or operational effectiveness.Communicate daily and weekly expectations to contactors.Provide accurate drawings and installation details.Reduce downtime by making sure all necessary parts are on hand.Provide critical decision making to resolve design and installation conflicts.Provide Hands On Mechanical/Electrical work and Supervision to UniFirst and contractor personnel during installation of systems.Continual Improvement-System design and installationQualificationsRequirements: Hold Mechanical/Technical degree, certification or equal “On the Job” experience.Minimum 2 years experience designing and managing projects in the Industrial Conveyor/Material Handling Field.Candidate must be willing to directly managing project installation.Report for work at local Branch/Plant when not on the road.Experience with AutoCAD to develop detailed mechanical layouts/ diagrams for conveyors, sorters, and storage equipment.Experience with MS Office, Word,Excel, MS Project.Must be a team player. He/She will be a part of an overall process where interaction with other employees is essential. The candidate must enjoy having a fluid interchange of ideas and recommendations from both Engineering and Plant Management.Strong training and presentation skillsMust have strong analytical skillsExcellent verbal, leadership, Integrity and Communication skillsMust have ability to make decisions in time-sensitive situations The estimated base salary for this position ranges from $80,000.00 to $90,000.00 annually with additional management bonus eligibility. This range reflects various factors, including but not limited to the applicant's skills, qualifications, and previous work experience. Additionally, geographic differentials may apply based on the location where the position is ultimately filled, which could affect the final compensation. Benefits & Perks: 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. UniFirst is an international leader in garment & Uniform services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

PREVENTING ENVIRONMENTAL HARMWe go to extraordinary measures to protect our Airmen from environmental hazards and infractions. Applying engineering and scientific principles, Bioenvironmental Engineers identify and evaluate potential dangers and develop programs to prevent illness and injury. With an emphasis on discovering problems before they occur, these specialists ensure the health and safety of Airmen and their families in environments all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor of Science in engineering from an ABET-accredited institutionQualificationsCompletion of qualifying Bioenvironmental Engineering courseMinimum of 24 months of experience in bioenvironmental engineering assignmentsCompletion of Officer Training School courseMust be between the ages of 18 and have not reached your 42ndbirthday

This Systems Engineering Supervisor will be responsible for managing the planning, design and the installation of all Sortation Equipment by Systems Engineering. Direct on-site management will be required to ensure the success of concurrent projects. This position will work side by side with Systems Programming in the development of reliable equipment that provides the most effective cost/benefit to UniFirst Corporation. The Systems Design and Installation Supervisor will report directly to the Systems Engineering Manager. List the general responsibilities and descriptions of key tasks and their purpose, relationships with customers, coworkers, and others, and the results expected of incumbent employees. Responsibilities: Budgeting, Design and Planning Perform Plant assessments and provide system recommendations for approval.Assist in the Design of Systems that will improve plant productivity, efficiency and provide for regional growth.Maintain and provide accurate records or project spending.Develop transitional plans that will allow for system installation without major impact to plant operations or UniFirst Customers.Effectively communicate to Executive and Plant ManagementSystem prerequisitesLabor demand, quantity and quality.Equipment operation and the impact on production flow.Installation timeline.Transitional difficulties. Safety Maintain safe working environment during installation for both Contractors and Plant Employees.Install systems that comply with all applicable Local and National Safety Codes.Train and promote safety in the proper use and maintenance of installed equipment.Provide documentation for all installed equipment Installation Management Effectively schedule and utilize inside/outside contractors to complete project.Coordinate resources based on UniFirst Corporation priorities.Aggressively manage project costs, without sacrificing system safety or operational effectiveness.Communicate daily and weekly expectations to contactors.Provide accurate drawings and installation details.Reduce downtime by making sure all necessary parts are on hand.Provide critical decision making to resolve design and installation conflicts.Provide Hands On Mechanical/Electrical work and Supervision to UniFirst and contractor personnel during installation of systems.Continual Improvement-System design and installationQualificationsRequirements: Hold Mechanical/Technical degree, certification or equal “On the Job” experience.Minimum 2 years experience designing and managing projects in the Industrial Conveyor/Material Handling Field.Candidate must be willing to directly managing project installation.Report for work at local Branch/Plant when not on the road.Experience with AutoCAD to develop detailed mechanical layouts/ diagrams for conveyors, sorters, and storage equipment.Experience with MS Office, Word,Excel, MS Project.Must be a team player. He/She will be a part of an overall process where interaction with other employees is essential. The candidate must enjoy having a fluid interchange of ideas and recommendations from both Engineering and Plant Management.Strong training and presentation skillsMust have strong analytical skillsExcellent verbal, leadership, Integrity and Communication skillsMust have ability to make decisions in time-sensitive situations The estimated base salary for this position ranges from $80,000.00 to $90,000.00 annually with additional management bonus eligibility. This range reflects various factors, including but not limited to the applicant's skills, qualifications, and previous work experience. Additionally, geographic differentials may apply based on the location where the position is ultimately filled, which could affect the final compensation. Benefits & Perks: 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. UniFirst is an international leader in garment & Uniform services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

This Systems Engineering Supervisor will be responsible for managing the planning, design and the installation of all Sortation Equipment by Systems Engineering. Direct on-site management will be required to ensure the success of concurrent projects. This position will work side by side with Systems Programming in the development of reliable equipment that provides the most effective cost/benefit to UniFirst Corporation. The Systems Design and Installation Supervisor will report directly to the Systems Engineering Manager. List the general responsibilities and descriptions of key tasks and their purpose, relationships with customers, coworkers, and others, and the results expected of incumbent employees. Responsibilities: Budgeting, Design and Planning Perform Plant assessments and provide system recommendations for approval.Assist in the Design of Systems that will improve plant productivity, efficiency and provide for regional growth.Maintain and provide accurate records or project spending.Develop transitional plans that will allow for system installation without major impact to plant operations or UniFirst Customers.Effectively communicate to Executive and Plant ManagementSystem prerequisitesLabor demand, quantity and quality.Equipment operation and the impact on production flow.Installation timeline.Transitional difficulties. Safety Maintain safe working environment during installation for both Contractors and Plant Employees.Install systems that comply with all applicable Local and National Safety Codes.Train and promote safety in the proper use and maintenance of installed equipment.Provide documentation for all installed equipment Installation Management Effectively schedule and utilize inside/outside contractors to complete project.Coordinate resources based on UniFirst Corporation priorities.Aggressively manage project costs, without sacrificing system safety or operational effectiveness.Communicate daily and weekly expectations to contactors.Provide accurate drawings and installation details.Reduce downtime by making sure all necessary parts are on hand.Provide critical decision making to resolve design and installation conflicts.Provide Hands On Mechanical/Electrical work and Supervision to UniFirst and contractor personnel during installation of systems.Continual Improvement-System design and installationQualificationsRequirements: Hold Mechanical/Technical degree, certification or equal “On the Job” experience.Minimum 2 years experience designing and managing projects in the Industrial Conveyor/Material Handling Field.Candidate must be willing to directly managing project installation.Report for work at local Branch/Plant when not on the road.Experience with AutoCAD to develop detailed mechanical layouts/ diagrams for conveyors, sorters, and storage equipment.Experience with MS Office, Word,Excel, MS Project.Must be a team player. He/She will be a part of an overall process where interaction with other employees is essential. The candidate must enjoy having a fluid interchange of ideas and recommendations from both Engineering and Plant Management.Strong training and presentation skillsMust have strong analytical skillsExcellent verbal, leadership, Integrity and Communication skillsMust have ability to make decisions in time-sensitive situations The estimated base salary for this position ranges from $80,000.00 to $90,000.00 annually with additional management bonus eligibility. This range reflects various factors, including but not limited to the applicant's skills, qualifications, and previous work experience. Additionally, geographic differentials may apply based on the location where the position is ultimately filled, which could affect the final compensation. Benefits & Perks: 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. UniFirst is an international leader in garment & Uniform services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Information Security is crucial at UniFirst and is part of a broader Information Governance, Risk, and Compliance program within IT. The Senior Information Security Engineer will be a key factor in leveraging the current implemented security technologies and enhancing related processes and procedures. The Senior Information Security Engineer is responsible for discovering, evaluating, and delivering security technologies to protect all sensitive information. The Senior Information Security Engineer will provide technical knowledge and analysis to include applications, operating systems, vendor risk management, incident response and security awareness and training. Responsibilities: Contribute to the implementation of UniFirst’s security controls environmentProvide consultation for configuration of technologies managed by IT InfrastructureMaintain and continuously improve the security incident response planHelping with the resolution of security incidents and determining root causeEstablish baselines and monitor/report on trends and anomaliesActs as a principal resource for escalated security incidents and responseWork together with all teams to fine-tune infrastructure/application/database protection and provide input for secure software developmentConduct examinations of system logs, applications, and networks security eventsSupport IT Operations Control Center teamProviding security support for application and infrastructure related projectsConducting Security Risk Assessments on new and existing technologiesPartner in the vulnerability management programWill be a critical partner in driving an improved overall security postureQualificationsRequirements: Bachelor’s degree in Computer ScienceInformation Systems, or related discipline preferred or equivalent job experienceCISSP certification(s) preferred.Must have 5+ years of experience as a Security EngineerFamiliar with security related frameworks including CIS18, NIST and PCIExperience with Incident Management programsExperience in intrusion detection and analysisKnowledge of SPLUNK, Nessus, Email gateway, O365, and Palo Alto technologiesExperience monitoring, investigating, and solving IT security related concernsStrong interpersonal skills including strong written and oral communication skillsExperience with building & managing user awareness training programsAbility to multi-task and balance priorities Benefits & Perks: 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. UniFirst is an international leader in garment & Uniform services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

This position will be responsible for directly overseeing installation and repairs of the Wastewater Systems and equipment as well as audit and improve operations at locations. This position will also be required to learn how to design and suggest system layouts based on plant needs. This position will handle all personnel and material logistics necessary to complete the project. Personal “hands-on” labor will be required to assist and expedite mechanical and electrical repairs. The Project Tech will report directly to the Systems Engineering Director as well as the Environmental System Supervisor. Responsibilities: Effectively schedule and utilize inside/outside contractors to complete project assigned.Coordinate resources based on UniFirst Corporation priorities.Identify deficient equipment both mechanical and electrical. Order parts needed for repairs and with the help of the location staff make needed repairsCommunicate with location on what repairs are needed and how to prevent failures in the system.Provide accurate prints of system layout, P&ID and electrical changes made when repairing system.Reduce downtime by making sure all necessary parts are on hand.Provide critical decision making to resolve design and installation conflicts.Provide Hands On Mechanical/Electrical work and Supervision to UniFirst and contractor personnel during installation of wastewater systems.Continual Improvement-System design and installationQualificationsRequirements: Hold Mechanical/Technical degree, certification or equal “On the Job” experience.Minimum 2 years experience in the Industrial Environmental Field.Experience with MS Office, Word,Excel, MS Project.Experience or ability to learn AutoCAD to develop detailed mechanical layouts/ diagrams for WW Facilty layouts to include equipment placement, piping and electrical layouts.Experience with Electrical systems to include 460V, 240/208V, 120V as well as 24VDCExperience with mechanical systems, including Pumps, Mixers and Piping systems.Candidate must be willing to travel up to 70%, directly managing project installation.Work a 10 day ON-4 day OFF schedule when necessary to manage project installation.Must be a team player. He/She will be a part of an overall process where interaction with other employees is essential. The candidate must enjoy having a fluid interchange of ideas and recommendations from both Engineering and Plant ManagementMaintain safe working environment during installation for both Contractors and Plant Employees. The estimated salary for this position ranges from $80,000.00 to $90,000.00 annually. This range reflects various factors, including but not limited to the applicant's skills, qualifications, and previous work experience. Additionally, geographic differentials may apply based on the location where the position is ultimately filled, which could affect the final compensation. Benefits & Perks: 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. UniFirst is an international leader in garment & Uniform services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws