RoadSafe is looking for Flaggers to join our team! $1500 Sign On Bonus
Work with the Traffic Control Department at work sites to direct motorists by flagging them away from worker activities, moving equipment, oncoming traffic and perform duties listed below.
Set-up signs, cones, etc. around work areas to divert traffic Follow all safety rules and regulations and wear proper safety equipment ( work boots 6 inch with safety toe, hard hat and safety vest) Without Supervision must be able to set up and perform flagger position at job site based on site plan and or contractor directions Generally, works under the Supervision of Project Manager, TCT, TCS or maybe assigned to work independently Adhere to all Company Policies and Procedures Complete daily paperwork accurately and timely Operate 2 way radio Work well in a team environment Must be able to communicate with contractors and relate specific customer/job changes, and other information to Supervisor, Project Manager, office staff or other persons Provide highest level of customer service to all customers Excellent attendance required, dependable transportation, good work ethic All other duties as assigned
Benefits: $1500 Sign on Bonus Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off Company paid GED program HSA 2nd Chance Employer 
Qualifications: Must be 18 years or older Pass a drug test Driver’s license required Must be able to speak and read English Hold a current Flagger certification or the ability to pass Company sponsored Flagger Certification, Ability to lead a small crew Successfully pass Company sponsored Defensive Driver training All candidates subject to a background check
Work Environment / Physical Requirements: Regularly exposed to outside weather conditions; moving equipment and machinery parts; moving traffic, and fumes and airborne particles Noise level of the work environment is usually moderate/loud Regularly required to stand/walk; reach with hands and arms; for up to 14 hours a day Occasionally lift and/or move more than 50 pounds
We are an Equal Employment Opportunity Employer Minority/Female/Disability/Veteran

The duties of an aircraft refueler will consist of servicing aircraft and other equipment with aviation and automotive fuels with the use of tanker trucks, hydrant carts or tow carts. Aircraft refulers are required to position the fueling equipment next to the aircraft and service it with fuel following all Airline and Company policy and safety regulations at all times. Other duties related to the job are completing required paperwork such fuel service records, tanker sheets, truck sheets and meter tickets and the sumping of overnight aircraft as well as performing normal shop housekeeping duties.
Benefits: 3 weeks of PAID TRAINING! Shift Differential Pay Regular pay increases Performance bonuses Overtime available Medical/dental Weekly pay 401K
Requirements: Must have CDL A or B licence Valid Driver's License Without Driver License Restriction B: A licensed driver 21 years of age or older must be in the front seat SS Card 18 years or older Varied shifts Pass federal background check, drug screen, & physical Current drivers license cannot have Class B restrictions

We are looking for a Maintenance Supervisor to join our team!
Reports directly to the Maintenance/Tank Farm Manager and is responsible for the day-to-day supervision of maintenance personnel, fueling vehicles and tank farm/fuel system operations. Conducts maintenance safety and training classes, instructs technicians utilizing on-the-job training, ensures all maintenance and quality control records and are in compliance with ATA 103 and airline specifications. Duties also include inventory control and procurement of all Into-Plane and Tank Farm replacement parts.
Benefits: Medical Dental Vision 401K
Qualifications: 3-5 years of supervisory or lead experience Strong verbal and written communication skills Must be able to manage a diverse workforce College preferred, but not required.

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Driven by our Purpose, we are committed to building a more sustainable future to make the world better for everyone. With more than 16,000 employees in more than 50 countries, we combine our global reach with local presence. We support more than 10,000 customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. Join a company where the people challenge themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. You will be part of a team known for its industry-leading talent, unparalleled portfolio, and unmatched commitment to customer success. Flowserve’s culture promotes recognition and rewards creativity, hard work, and commitment. We invite you to put your talents and career in motion at Flowserve Role Summary: Set up and operate a variety of machine tools to produce precision parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures. 2nd shift position Responsibilities: Operating Machine or Equipment – Operate basic equipment and machines and carry out routine tasks.Operations Management – Carry out operational tasks by following established processes.Equipment Maintenance and Repair - Help to maintain and repair equipment by carrying out preparations and providing assistance.Health, Safety and Environment – Follow basic mandatory work instructions to safeguard the environment and the wellbeing of oneself and others.Operational Compliance – Follow a straightforward mandatory procedure to ensure that work is carried out to the required quality standards and/or to ensure adherence to external regulatory codes and internal codes of conduct.Precision Equipment Utilization – Interpret and use precision measuring equipment/instruments such as micrometers, dial indicators, and depth gauges.Instructions and Drawings – Ability to read and interpret blueprints and geometric tolerances.Internal Communications – Exchange information with people by having courteous interactions with them.Policy and procedures - Works with guidance to understand policies and procedures, while making sure they match organizational strategies and objectives.Other duties as assigned. Requirements: HS Diploma or GED or equivalentEquipment Experience – 5+ years machining experience in a manufacturing or repair environment operating manual lathes, milling machines, or CNC lathes/mills.Verbal Communication – Uses clear and effective verbal communication skills to express ideas and request actions.Planning and Organizing – Works with guidance to plan, organize, and prioritize activities to efficiently meet business objectives.Health and Safety - Applies elementary concepts to manage and apply safe systems of work. Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits The pay range for this role is $29.61 - $44.44per hour. Req ID : R-10063 Job Family Group : Operations Job Family : OP Machining EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

" POSITION OVERVIEW:Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1 ext. 2862 or by sending an email to . Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products "

Job Description:Position Details:1st Shift, Monday-Friday 7am - 3:30pmPay starts at $31.00 per hour or more based on experienceWe Deliver the Goods: Competitive pay and benefits, including Day 1 Health & Wellness Benefits, Employee Stock Purchase Plan, 401K Employer Matching, Education Assistance, Paid Time Off, and much moreGrowth opportunities performing essential work to support America’s food distribution systemSafe and inclusive working environment, including culture of rewards, recognition, and respectPosition Purpose:We value the safety of our associates! The Diesel Technician - Class A keeps our associates safe by repairing, maintaining, and overhauling all company fleet diesel equipment to ensure a safe operation for associates’ usage and ensure compliance standards are met.Primary Responsibilities:The Diesel Technician – Class A diagnoses and repairs medium to heavy-duty trucks, trailers, reefer units, convertor dollies and maintenance vehicles under minimal supervision. Responsibilities may include, but not limited to:Completes overhauls and rebuilds of heavy-duty diesel engines and transmission.Completes and performs preventative maintenance on minor repairs and standard component inspections/ repairs of fleet diesel equipment (tractors, trailers, refrigeration units). Identifies root cause of basic failures/conditions and perform repairs as required.Inspects brake systems, steering mechanisms, wheel bearings, and other important parts to ensure that they are in proper operating condition which may require replacement of parts.Ensures equipment has required licensing and registration prior to being deemed as “roadworthy”.Completes thorough documentation for work orders of repairs and preventative maintenance through the online Enterprise Asset Management system.Installs, replaces, and repairs onboard computers.Inspects brake systems, steering mechanisms, wheel bearings, and other important parts to ensure that they are in proper operating conditions.Performs routine maintenance such as changing oil, checking batteries and lubricating equipment and machinery requiring the use of hand tools such as screwdrivers, pliers, wrenches, pressure gauges, and precision instruments, as well as power tools such as pneumatic wrenches, welding equipment, and jacks and hoists.Trains/provides guidance to other Mechanics.Performs other related duties as assigned.Qualification:High School Diploma/GED or Equivalent 5 - 7 years of proven medium to heavy-duty vehicle repair including PM's, tire & wheel, air & air disc brakes, diagnosis, computerized diagnostics, electrical troubleshooting, electronic component repair and a minimum of 2 years’ experience in refrigeration &/or overhauls and rebuilds of heavy-duty diesel engines and transmissionsCompany descriptionPerformance Foodservice, PFG’s broadline distributor, maintains a unique relationship with a variety of local customers, including independent restaurants and hotels, healthcare facilities, schools, and quick-service eateries. A team of sales reps, chefs, consultants, and other experts builds close relationships with customers providing advice on improving operations, menu development, product selection, and operational strategies. The Performance team delivers delicious food but also goes above and beyond to help independent restaurant owners achieve their dreams.Awards and AccoladesPerformance Food Group and/or its subsidiaries (individually or collectively, the "Company") provides equal employment opportunity (EEO) to all applicants and employees, regardless of race, color, national origin, sex, marital status, pregnancy, sexual orientation, gender identity, religion, age, disability, genetic information, veteran status, and any other characteristic protected by applicable local, state and federal laws and regulations. Please click on the following links to review: (1) our EEO Policy; (2) the "EEO is the Law" poster and supplement; and (3) the Pay Transparency Policy Statement.

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationHigh school diploma, GED with 15 college credits, or GED Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

BlueTriton is a leading provider of spring and purified water products - the name behind your favorite bottled water brands. We are proud to offer an extensive portfolio of highly recognizable, responsibly sourced, and sustainably packaged spring water in addition to other quality products and services. Get ready to quench your thirst with exciting possibilities when you join BlueTriton for a fiercely good career doing work that matters.ReadyRefresh brings hydration that supports a healthy lifestyle, and convenience that preserves precious time and sustainability to help improve our world. Our ReadyRefresh branches and warehouses are where our iconic brands begin their journey to the customer.Job DescriptionJoin our Fleet Technician team in Jersey City, NJ. Limited openings available for this highly sought-after position.The Master Fleet Technician’s primary purpose will require the individual to perform preventative and corrective maintenance on fleet vehicles and equipment including gas and diesel engines, hydraulic systems, air brakes, and forklifts.GREAT PAY – $36.00 / hour (based on qualifications) SHIFT DIFFERENTIAL – 6%-8% of base hourly rate shift differential paid for applicable hours worked $5000 SIGN ON BONUS – Payable in two payments GROWTH AND STABILITY – Our Deer Park Water has been hydrating NJ communities since 1873 $1500 EMPLOYEE REFERRAL BONUSES – Unlimited!Our Benefits Package 401(k) matching; AD&D insurance; Uniform Allowance; Dental insurance; Disability insurance; Employee assistance program; Employee discounts and perks; Health insurance; Health savings account; Life insurance; Paid orientation; Paid time off; Paid training; Paid vacation; Prescription drug insurance; Safety equipment provided; Vision insuranceSchedule: Monday – Friday, Full-TimeShift: 2:00 PM – 10:30 PM – Other shifts will be considered based on business needsSkills Required: • Troubleshoot and repair fleet vehicles and equipment to include planned preventive maintenance, warranty repair, and other scheduled services. • Program and record all repair work in Trimble TMT electronic maintenance system and on company PM Cards • Electronically bill out parts in Trimble TMT Fleet software or company proprietary systems. • Ensure planned preventive maintenance, warranty repair, and other scheduled services are completed daily • Assist in education of the Route Sales Representatives’ pre and post-trip inspections • Adhere to all department policies and procedures; track all required documentation • Maintain work area ensuring organization and cleanliness • Ensure company safe work practices are always followed • Oversee Fleet Technicians and provide direction as assigned by Lead Technician • Help schedule and support all work within the shop, including trainings • Ensure DOT and Safety, Health, and Environmental compliance standards are metQualificationsRequirements/Qualifications: • Minimum five years hands-on experience in commercial fleet repair (gas, diesel or propane accepted) • High school diploma, GED, or equivalent work experience • Accredited vocational / trade school certification preferred • Ability to handle physical requirements, including, but not limited to, repeated bending, stretching, twisting, and lifting up to 60 pounds in all work conditions (indoor and outdoor), with or without a reasonable accommodation • A valid driver’s license and acceptable driving record • Ability to secure and maintain a CDL Class B with airbrake endorsement within specified period • Ability to secure and maintain T4 (airbrake) certification within specified period • Must possess mechanic hand-tools and toolbox for secure storage • Self-motivated and capable of working independently without direct supervision • Proficient with Microsoft Office programs, Electronic Diagnostic Tools, and Electronic Maintenance Database applications • Strong customer service and communication skillsBlueTriton Brands, Inc. (“BlueTriton”) is a water and beverage company in North America that produces and distributes a portfolio of brands of spring water, purified water, and other beverages, which include Poland Spring®, Deer Park®, Ozarka®, Ice Mountain®, Zephyrhills®, Arrowhead®, Origin, Saratoga®, AC+ION®, Pure Life®, B’EAU®, and Splash Refresher. BlueTriton also owns and operates ReadyRefresh®, a water and beverage delivery service for homes and offices. Headquartered in Stamford, Connecticut, BlueTriton is a privately held company with operations and distribution primarily in the United States and Canada, employing more than 7,000 employees. BlueTriton manages water resources for long-term sustainability and helps protect more than 20,000 acres of watershed area owned by the company from harm and destruction. The company sources from 56 springs and has 30 production facilities across North America, with some verified to the Alliance for Water Stewardship Standard. BlueTriton is a Water Champion with The Water Council and has committed to be verified under their WAVE program.BlueTriton Brands is proud to be an Equal Opportunity and Affirmative Action employer, seeking to create a welcoming and diverse environment. We do not discriminate based on race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state, and local law. BlueTriton Brands is committed to providing reasonable accommodation for candidates with disabilities in our recruiting process. If you need any assistance or accommodations due to a disability, please contact us at

Electro-Mechanical Technician Make a Difference in YOUR Career! Our vision is both simple and ambitious: to put our drinks on every table. We are the world’s largest bottler for retailers and A-brands. Our products are distributed worldwide from our production sites in Europe and North America. Although our own branding may not appear on the labels of the beverages we produce, there is a good chance you are reading this while sipping one of our drinks. Our ambition is to continually improve and it’s what keeps us at the top of our game. We are solutions-based. We are innovative. We seek out new challenges and conquer them. This is our company ethos, but it’s our people’s too: Refresco is at the cutting edge of a fast-moving industry because we have passionate people pushing the boundaries of what’s best. Stop and think: how would YOU put our drinks on every table Job Duties: Effectively complete preventive and proactive maintenance per the schedule to prevent breakdowns on equipment.Utilize root-cause analysis skills to investigate breakdown and line stoppages while collaborating with other departments.Acts as the "first responder" when a line stops producing and assures that the appropriate mechanical help is on site to correct any problems quickly using PLC, electrical and/or mechanical skills.Support the facility's food safety and food quality programs to assure compliance and achieve desired results.Prioritizes work to ensure timely maintenance, repair and installation of equipment, tools and utility systems to minimize manufacturing downtime and completes all required paperwork and documentation in the Computerized Maintenance Management System (CMMS).Utilizes the CMMS to open and close out work orders, check out spare parts, and other activities as required in the plant.Repair or maintain the operating condition of industrial production or processing machinery or equipment including inspection, assembly, disassembly, and replacement as necessary.Observe and test the operation of machinery or equipment to diagnose malfunctions, using voltmeters or other testing devices.Operate newly repaired machinery or equipment to verify the adequacy of repairs.Analyze test results, machine error messages or information obtained from operators to diagnose equipment problems.Reviews maintenance reports and statistics to plan and modify maintenance activities.Inspects operating machines and equipment for conformance with operational and safety performance standards.Examine objects, systems or facilities and analyze information to determine needed repairs.Proven proficiency working with Basic Tool Room Equipment, Hydraulic systems, Programmable Logic Controllers and Ladder Logic.Actively pursues growth and developmental opportunities; seeks out feedback and responds without defensiveness; continuously finds ways to improve.Perform other duties as required by supervisor. Required Education, Work Experience & Certifications: Candidates must successfully pass the Ramsey Mechanical (Electrical) Skills and Aptitude Assessment in order to be considered.3+ years experience in industrial manufacturing maintenance is a must!Strong Electrical/Electronic troubleshooting and repair skills required.Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals.Demonstrated ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals.Able to apply common sense understanding to carry out instructions furnished in written, oral or diagram form.Computer skills.Willingness to work flexible hours.Strong written and interpersonal communication skills. Physical Demands of the Position: Standing, walking, kneeling and bending approximately 85% of dayComputer and administrative work approximately 15% of dayAbility to lift and carry up to 50 poundsAbility to communicate effectively. A Career with Refresco Refresco offers a competitive salary and comprehensive benefits, which include: · Medical/dental/vision insurance · Life insurance 401(k) savings plan with company matchPaid holidays and vacation Make a Difference in YOUR Career!Our vision is both simple and ambitious: to put our drinks on every table.We are the world’s largest bottler for retailers and A-brands. Our products are distributed worldwide from our production sites in Europe and North America. Although our own branding may not appear on the labels of the beverages we produce, there is a good chance you are reading this while sipping one of our drinks.Our ambition is to continually improve and it’s what keeps us at the top of our game. We are solutions-based. We are innovative. We seek out new challenges and conquer them. This is our company ethos, but it’s our people’s too: Refresco is at the cutting edge of a fast-moving industry because we have passionate people pushing the boundaries of what’s best.Stop and think: how would YOU put our drinks on every table Well-being benefitsDiscount programs Join Refresco TODAY and enjoy a rewarding CAREER! Equal Opportunity Employer Refresco is an Equal Employment Opportunity/Affirmative Action employer. Refresco does not discriminate against qualified applicants or employees based on race, color, age, religion, sex, pregnancy, national origin, ancestry, age, physical or mental disability, veteran status, status in uniformed services, sexual orientation, gender identity, gender expression, marital status, genetic information, or any other status protected by law.EducationPreferredTechnical/other training or betterHigh School or betterBehaviorsPreferredDedicated: Devoted to a task or purpose with loyalty or integrityTeam Player: Works well as a member of a groupDetail Oriented: Capable of carrying out a given task with all details necessary to get the task done wellMotivationsPreferredFlexibility: Inspired to perform well when granted the ability to set your own schedule and goalsWork-Life Balance: Inspired to perform well by having ample time to pursue work and interests outside of workSelf-Starter: Inspired to perform without outside help

Compensation Type: Hourly Highgate Hotels: Highgate is a premier real estate investment and hospitality management company widely recognized as an innovator in the industry. Highgate is the dominant player in U.S. gateway markets including New York, Boston, Miami, San Francisco and Honolulu, with a rapidly expanding presence in Europe, Latin America, and the Caribbean. Highgate’s portfolio of global properties represents an aggregate asset value exceeding $20B and generates over $5B in cumulative revenues. The company provides expert guidance through all stages of the hospitality property cycle, from planning and development through recapitalization or disposition. Highgate also has the creativity and bandwidth to develop bespoke hotel brands and utilizes industry-leading proprietary revenue management tools that identify and predict evolving market dynamics to drive out performance and maximize asset value. With an executive team consisting of some of the industry’s most experienced hotel management leaders, the company is a trusted partner for top ownership groups and major hotel brands. Highgate maintains corporate offices in London, New York, Dallas, and Seattle. Overview: The Engineer, Level 2 is responsible for insuring that the property is maintained in the best possible condition at all times with the least amount of inconvenience to guests and employees. Responsibilities: Make repairs to hotel air conditioning system: change filters, clean coils, replace motors.Perform preventive maintenance on all equipment (i.e. boilers, chillers, HVAC-Heating Ventilation and Air Conditioning, electrical, etc.).Take required readings on equipment.Test cooling tower and record readings.Replace and program televisions as needed.Replace light switches, receptacles, light bulbs and fixtures.Perform furniture repair.Replace and repair pumps.Perform plumbing repairs (i.e. clogged drains, copper pipe, change washers, change handles, drain fittings, etc).Understand and be able to read blueprints and wiring diagrams.Trace and repair all types of water lines.Troubleshoot and repair kitchen equipment.Maintain repair and preventive maintenance records.Perform and maintain work to local, state and Federal codes.Test, clean and repair swimming pools and spas.Paint designated areas.Repair and finish sheet rock.Repair all types of wall coverings.Repair and program hotel electronic lock system.Assist in supervising other engineering staff members.Assist in scheduling preventive maintenance tasks. Qualifications: High School diploma or equivalent and/or one year of experience in a hotel or related field required.At least two years of progressive experience in a hotel or related field preferred.Trade school and/or College course work in related field preferred.Flexible and long hours sometimes required.Heavy work - Exerting in excess of 100 pounds of force occasionally, and/or in excess of 50 pounds of force frequently and/or in excess of 20 pounds constantly to lift, carry, push, pull, or otherwise move objects.objects.Maintain a warm and friendly demeanor at all times.Must be able to effectively communicate both verbally and written, with all level of employees and guests in an attentive, friendly, courteous and service oriented manner.Must be effective at listening to, understanding, and clarifying concerns raised by employees and guests.Must be able to multitask and prioritize departmental functions to meet deadlines.Approach all encounters with guests and employees in an attentive, friendly, courteous and service-oriented manner.Attend all hotel required meetings and trainings.Maintain regular attendance in compliance with Highgate Hotel Standards, as required by scheduling, which will vary according to the needs of the hotel.Maintain high standards of personal appearance and grooming, which includes wearing the proper uniform and nametag.Comply with Highgate Hotel Standards and regulations to encourage safe and efficient hotel operations.Maximize efforts towards productivity, identify problem areas and assist in implementing solutions.Must be effective in handling problems, including anticipating, preventing, identifying and solving problems as necessary.Must be able to understand and apply complex information, data, etc. from various sources to meet appropriate objectives.Must be able to cross-train in other hotel related areas.Must be able to maintain confidentiality of information.Must be able to show initiative, including anticipating guest or operational needs.Perform other duties as requested by management.

Forbes List of America's Best Employers 2022, 2023, & 2024 Move forward with us! At NJ TRANSIT, you'll join us in transforming the third-largest transportation agency in North America. We are committed to delivering safe, reliable service that gets our customers to their destinations on timeand we’re looking to hire talented folks with a love of learning to make it all possible. ***Now Offering $3,000 Signing Bonuses for all new Servicepersons*** $6,000 Signing Bonusfor CDL A or B License Holders (must have air brake and passenger endorsement) at time of hire Summary New Jersey Transit may have openings at any of the following Locations: Howell, Neptune, Egg Harbor, Hamilton, Camden, and Turnersville. Under the direction of the Superintendent or General Foreman, a Bus Serviceperson is responsible for checking and maintaining of all NJ TRANSITbuses for daily services. Report any damages or repairs needed as directed by the supervisor. Roles and Responsibilities: Check bus fluids and maintain required levelsChange fluidsClean inside and around busesShift and drive buses in and around the garageSteam enginesChange tires (utilizing the appropriate equipment)Complete forms required in carrying out duties of the position Training: NJ TRANSIT’s Maintenance Department offers a six (6) day, comprehensive job-related training for all new Servicepersons at our Training Facility in Newark, NJ. NJ TRANIST’s Bus Operational Training Department offers up to 30 days of classroom instruction to assist new Serviceperson hires with obtaining a NJ Commercial Learner’s Permit, which is an essential requirement of the Serviceperson position. In order to have sucessful job placement and continued employment with NJ TRANSIT as a Serviceperson: Upon receiving an offer, youmust purchase an CDL Permit Examination Ticket at a NJ MVC location, and complete the IdentoGo fingerprinting process prior to startingAll new hiresmust obtain a Commercial Learner’s Permit (CLP) valid in the state of New Jersey within thirty (30) days of their start date.A Serviceperson must successfully complete both bus maintenance and bus operational training, including the receipt of a Class A/B Commercial Driver License valid in the state of New Jersey with a passenger endorsement and no disqualifying restrictions. Education, Experience, and Qualifications: Light professional mechanical experience preferred;diesel experience a plus but not requiredBe twenty-one years (21) years of agePossess a valid NJ Driver’s License with three (3) years of driving experienceMust be eligible to obtain a Commercial Driver’s License (CDL) with passenger endorsementorpossess a valid NY/PA CDL with Passenger and Airbrake endorsement***Be able to work any shift in keeping with seniority-based scheduling. Hours vary depending upon the Bus Garage.Be able to pass the pre-employment physical and background checksHave a good driving record with less than five (5) points At NJ TRANSIT you will enjoy a competitive salary and excellent benefit package! $6,000 Signing Bonusfor CDL A or B License Holders (must have air brake and passenger endorsement) at time of hire*$3,000 Signing Bonusfor all newly hired Servicepersons*Full benefit package including medical, prescription, dental & visionPension plan plus 457 tax-deferred savings plan (lifetime benefit)Growth OpportunitiesPaid time offAssistance obtaining your CDL (for NJ drivers only)Salary: $19.49 At NJ TRANSIT, diversity and inclusivity are vital to our success as we are committed to hiring individuals from diverse backgrounds, experiences, abilities, and veteran status. As an Equal Opportunity Employer, we encourage all qualified applicants to apply and join our team. Learn more about NJ TRANSIT! Sign up to receive an invitation to our next live information session atWWW.NJTRANSIT.COM/BEST *Terms and Conditions Apply. This position is deemed safety sensitive per the Department of Transportation (DOT) Drug and Alcohol Testing Regulations.The DOT Drug and Alcohol Testing Regulation 49 CFR Part 40 does not authorizethe use of marijuana for any reason. It is unacceptable for any safety-sensitive employee subject to drug testing under DOT regulations to use recreational or medical marijuana. The prohibitionincludes any derivative of marijuana such as CBD oils, teas, etc. The use of recreational and medical marijuana is a violation of NJ TRANSIT’s Drug and Alcohol-Free Workplace Policy for safety-sensitive employees. Code:INDBU1

$22.00/hourUp to $2,500 Retention BonusShift Premium may ApplyImmediately hiring! We're looking for responsible, detailed people who are ready to accelerate their automotive repair career! Whether you have worked in an auto garage or car dealership, this job is for you ! Join our team of driven professionals at Avis Budget Group enterprise. What You'll Do: As an automotive technician, you will be responsible for conducting essential repairs on a diverse range of vehicle brands and models, requiring minimal technical oversight. Your tasks will encompass various maintenance activities such as oil changes, lubrication, tire repairs, and potentially warranty repairs based on your proficiency level. In addition, you may support our skilled mechanics in handling intricate repair procedures. Perks You'll Get: Bi-weekly hourly wage (New York and Puerto Rico: weekly wage)On-the-job training to expand your automotive abilities and help to obtain ASE CertificatesPaid time offMedical, d ental and o ther i nsuranceFlexible spending account opportunity to contribute up to $270 as a tax-free benefit for public transportation or parking expensesRetirement benefits (401k)Employee discounts, including discounted car rental and discounted prices on the purchase of Avis/Budget cars* Above perks may vary based on full-time/part-time status and location What We're Looking For: Valid Driver's License and good driving recordAt least 2 year s of auto repair experience or coursework with automotive certifications1 ASE certificat ion (ability to acquire 2 additional ASE certificat ions within first year)Knowledgeable in areas covered by the ASE certification programs, including, but not limited to, Engine Repair, Drive Train/Axles, Suspension/Steering, Brakes, Electrical, Heating/Air Conditioning, Engine Performance and Light Vehicle/DieselComfortable working in a mechanical shop with moderate or loud noise levelsMust have a complete set of tools required for auto repair and maintenanceBasic computer skills including typing, data entryMust be able to lift up to 50 pounds, continuously stand, bend, reach, walk, sit and kneel frequently , enter, exit and drive vehiclesMust be 18 years of age and legally authorized to work in the United States Previous Original Equipment Manufacturer (OEM) experience preferred, providing an added advantage ! Who We Are Here at Avis Budget Group, you will be joining a team of 25,000 driven people, performing with purpose. Together, we're moving the future of transportation forward with our innovative, customer-focused solutions. Our culture is performance driven, where we encourage and support each other to be at our best through leadership, training, tools, and rewards. We are proud to make a positive difference to the lives of our colleagues, customers, and communities where we operate . Avis Budget Group is an Equal Opportunity Employer - Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other category protected by applicable law . This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. This position may be with any affiliate of Avis Budget Group . MatawanNew JerseyUnited States of America

Overview: GovCIO is currently hiring for a Journeyman Telecommunications Deployment Engineer to provide telecommunications support to their local area, and travel around the country for telecommunications deployment activities. This position can be located in Newark, NJ or Manhattan and will be primarily an onsite position. Responsibilities: Provides installation, technical expertise, and training for all telecommunications equipment and components. Installs, configures, terminates and tests all telecommunications equipment, cables, connectors, and interfaces. Performs intricate alignment and calibration procedures to ensure telecommunication systems are operating efficiently. Resolves system operational problems by troubleshooting and performing fault isolation. May supervise telecommunications technicians, outside contractors providing technical support and media production services.Responsible for installation activities within the telecommunications function including implementation, diagnostics and operations/user support.Monitors the operation of telecommunication network systems and transition mediums.Performs complex tasks relating to telecommunication network operations, installation, and/or maintenance for local, off-site and/or remote locations.Serves as technical specialist for the resolution of complex network problems.Provides field reporting as required.Below is a non-comprehensive list of technologies that the technician may encounter. The ideal candidate will understand the purpose of these technologies and have some experience with them, or with equivalent technologies:Cisco IP audio and video endpoints, Unified Call Manager (CUCM), Expressway Meeting Server (CMS), Meeting Management (CMM), Telepresence Management Suite (TMS), Prime, and Identify Services Engine.Broadsoft CloudMicrosoft System Center Configuration Manager (SCCM)Avaya technologies including audio/video components, Communicator, One-X, Application Enablement Server (AES), and the following at version 6.0 or above: Communications Manager, Session/System Manager, and Aura Messaging.Polycom DMA, Real Presence, and endpointsSolarwindsSplunk (syslog)CyberArkICAM / Single Sign On methodologies (SSO) / CertificatesInfoBlox / AkamaiSIP routing, dial pattern and number translations, E.164 routing, PRI as well as standards-based codecs, to include codecs from Cisco and PolycomVideo Conferencing Services (VCS) infrastructureUnified Communications and Video conferencing, including but not limited to: Cisco Unified Communications Manager, Unity Connection, TEAMS, UCCX, Expressways, Jabber Client, SIP, H.323, and QoSSession Border Controllers (SBC), Cisco Unified Border Elements (CUBEs) Qualifications: Bachelor's with 2-5 years (or commensurate experience)Required Skills and ExperienceUSCitizenHigh degree of technical proficiencyExcellent problem-solving skills and analytical abilitiesPreferred Skills and ExperienceCCNA or aboveClearance Required: Must be able to obtain and hold a Public Trust Clearance#JM Company Overview: GovCIO is a team of transformers--people who are passionate about transforming government IT. Every day, we make a positive impact by delivering innovative IT services and solutions that improve how government agencies operate and serve our citizens.But we can't do it alone. We need great people to help us do great things - for our customers, our culture, and our ability to attract other great people. We are changing the face of government IT and building a workforce that fuels this mission. Are you ready to be a transformer We are an Equal Opportunity Employer.All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, gender identity or expression, sexual orientation, national origin, disability, or status as a protected veteran. EOE, including disability/vets. Posted Pay RangeThe posted pay range, if referenced, reflects the range expected for this position at the commencement of employment, however, base pay offered may vary depending on multiple individualized factors, including market location, job-related knowledge, skills, education, experience, and internal equity. The total compensation package for this position may also include other compensation elements, to be discussed during the hiring process. If hired, employee will be in an “at-will position” and the GovCIO reserves the right to modify base salary (as well as any other discretionary payment or compensation program) at any time, including for reasons related to individual performance, GovCIO or individual department/team performance, and market factors. Posted Salary Range: USD $70,000.00 - USD $70,000.00 /Yr.

Industrial Electrician Camden, NJ, USAReq #708 Wednesday, January 17, 2024 About Us:EMR isone ofthe world’s leading metal recycling companieswith a history spanning decades.At EMR, our employees are the heart and soul of our organization. We are committed to creating a workplace that prioritizes the well-being and safety of everyone. Our company provides a supportive and inclusive community where everyone's ideas and contributions are valued.We believe in teamwork and collaboration.Our mission is to provide our customers with efficient and reliable metal recycling services while minimizing the environmental impact of our operations. EMR recycles ten million tons of material annually, everything from beverage cans to aircraft carriers. We work with a wide variety of metals including copper, aluminum, brass, and stainless steel and can recycle it into more than 200 different types of new sustainable raw materials.EMR offers our team a competitive salary and a comprehensive benefits package, including health insurance, retirement planswith company match, wellbeing benefits, employee assistance program and more. Join us and be a part of a team that puts people first! The Industrial Electrician is responsible for installation, repairs, troubleshooting, and maintaining all electrical systems. Duties include conducting scheduled maintenance, maintaining records, and testing all equipment. This career requires the ability to work in a fast paced environment, and the ability to install as well as replace electrical components. A high school diploma or GED equivalent is required. Previous industrial electrical experience, including PLC’s, VFD’s, and electrical schematics.II.ESSENTIAL DUTIES & RESPONSIBILITIESTroubleshoot and repair motors, VFD’s, PLC’s and electrical components on conveyor systems.Responsible for assisting with the design, build, and installation of MCC’s, control panels, and electrical components as specified by the engineering team or customers.Conduct scheduled maintenance and keep maintenance records.Observe safety procedures, LOTO, and meet electrical codes.Install, examine, replace or repair electrical wiring, switch boxes, receptacles and other electrical components.Test equipment such as digital multimeters, current clamps on Ammeters, etc.Other job duties as assigned.III.Required Skills / AbilitiesAbility to work in a fast paced environment.Demonstrated ability to work under pressure and meet deadlines.Ability to work independently as well as in a team environment.Creative problem solving skills, and the ability to resolve issues and provide solutions.Ability to work with HMI’s, PLC’s, VFD’s, electrical schematics, and troubleshooting.Expert knowledge of low voltage systems.Understanding of a variety of sensors, programming, and analog signals.Ability to lift up to 70 pounds.IV.Education & ExperienceHigh school diploma or GED-equivalent.Industrial Electrician certification or equivalent combination of education and training required.At least 5 years of industrial electrician experience required.Metals recycling and separation experience preferred but not required.V.Other Job DemandsWork is generally performed outdoors in all-weather elements such as hot, cold, rain, or snow and personal protective equipment is required. Working hours may vary and evening or weekend work may be required. You may be required to lift and carry weight up to fifty pounds. Travel requires the ability to drive and the use of a personal vehicle.#Li-Onsite EMR USA Metal Recycling provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Other details Job FamilyUS ProductionPay TypeHourly

Build your best future with the Johnson Controls Team As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away! What we offer: Competitive salary Paid vacation/holidays/sick time Comprehensive benefits package including 401K, medical, dental, and vision care On the job/cross training opportunities Encouraging and collaborative team environment Dedication to safety through our Zero Harm policy Check us out: A Day in a Life at Johnson ControlsWhat you will doThis is a remote position but will require regular travel within the territory so you must live near Central / Northern New Jersey (Edison to Fairfield)You will represent one of the leading brands in the HVAC distribution channel for York Factory Direct promoting the JCI portfolio in the assigned market. You will also become a member of a highly motivated, winning team fostering an inclusive and positive culture.You will be responsible for selling Residential and Commercial HVAC equipment, parts and supplies to HVAC contractors.The selected candidate will develop partnerships with existing customers to increase share of wallet, while recruiting new customers into the York family to increase market share. You will represent a company proud to design, assemble and manufacture HVAC products in the USA..Leadership coaching will be a constant throughout your career. Investing in our people is a high priority at JCI. Your sales leaders will onboard you with all the programs, product and company information you need to succeed.They will always be available to help answer questions and mentor you where they see fit or where improvements can be met. This is designed to make you the best sales professional in the industry so you can achieve all of your personal and professional goals!How you will do it:Build relationships with existing customers while expanding growth year-over-year.Discuss all the products and programs York Factory Direct offers to gain more share of wallet.Teach and coach customers to utilize all program features available to grow their business; the more they sell, the more we sell!Prospect and recruit customers who fit the York partnership profile. Prove “Why York” is an industry leader with the power behind it to grow their business.Create custom marketing strategies to help your customers grow.As needed, you will receive support from our market leaders and a marketing manager.Assist your customer to select the best York products to meet their client’s needs.This includes coaching them on their selling approach, product specifications/performance and application regulations which may vary by job.Negotiate prices and terms of sale.Ensure customers participate and attend our industry-leading training classes offered locally and virtually.Our local service managers are best-in-class providing your customer a great resource to improve their quality in the field and increase consumer confidence as they build their business.Perform to plan.Set weekly, monthly, quarterly and annual sales goals for overall sales, sales calls, product mix/segmentation, new dealer registrations, training, as well as many other sales metrics.What we look for:Bachelor’s Degree or an equivalent combination of education and experience.HVAC industry experience (preferred)Minimum 3+ years of direct outside sales experience.Must be able to use Microsoft Office and Salesforce.com.Travel required to each customer within aligned market.Self-motivated individuals with a high energy level and desire to achieve goals beyond what is required.The right fit is driven to become #1 in the region and across the entire company!High-performing sales individuals with an understanding of the sales process/cycle and knowledge of principles and methods for showing, promoting, and selling products or services. Anyone can sell a box, what separates you from the competition Ability to utilize sales process to uncover customer objections/concerns and determine appropriate solutions, while maintaining a plan of action until desired results are achieved.Understand the principles and processes for providing best-in-class customer service.Know what a customer needs before they ask.Exceed customer expectations with your level of service, knowledge and response time.Customer satisfaction is key to your success.Ability to listen, gain trust and bring to closure an action, project, resolution, or sale with customers.Business acumen including sales forecasting, opportunity management and customer planning.Ability to understand and communicate in today’s technologically driven business environment.HIRING SALARY RANGE: $60,000 - $90,000 (Salary to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This role offers a competitive Commission plan that will take into account project, quarterly, and annual margin. This position includes a competitive benefits package. For details, please visit the Employee Benefits tab on our main careers page at https://www.johnsoncontrols.com/careers.#LI-TK1#NAOTHER#SalesHiringJohnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Securitas Technology Corporation (STC) is a division of Securitas AB, the largest protective services provider in the world with over 370,000+ Securitas Heroes across the world.STC offers a full portfolio of video, access, intrusion, fire and integrated systems and services. As a leading systems integrator and alarm monitoring company, we deliver the STC Difference, serving countless long-term clients with solutions and services that protect their people, customers, and assets.STC is seeking technically minded individuals possessing experience with low voltage electronics specializing in electronic security solutions. Our teams are responsible for providing service on ST products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed.ResponsibilitiesRespond to trouble tickets to ensure application uptime and system performanceWork individually and as a team to diagnose and resolve application issuesExecute preventative maintenance tasks to maximize application availability and identify system faultsPerform routine configuration changes (user permissions, application configuration, etc.)Document all system modifications through a digital change control tracking systemProduce quality technical documentation describing the conceptual and quantitative facets of system deployment, intended for both a technical and non-technical audiencePerform pre-deployment end to end testing of all upgrades and major modificationsPerform on site installations of software upgrades and major modificationsMinimum RequirementsHigh School diploma required or equivalentFamiliarity installing and troubleshooting low voltage equipmentStrong working knowledge of commercial access control, CCTV, burglary alarm, intrusion systems, and fire alarmsStrong working knowledge of Microsoft OfficeStrong written and verbal communications skillsWorking knowledge of network communications and IP addressingExcellent problem solving and analytical skillsExcellent time management skillsPositive attitude and strong work ethicCertifications in enterprise grade CCTV and Access Control systems a plusSecuritas Technology Corporation offers comprehensive benefits including:Highly competitive salaryCompany training and industry leading certification programCompany VehicleCompany Cell PhoneMedical, Dental, Vision, and Life InsuranceCompany Paid Short Term and Long-Term Disability401K with 60% Match up to 6% of salaryPaid vacation, holiday and sick timeEducational AssistanceExceptional growth opportunitiesWide variety of employee discounts on travel, equipment, and more!We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

What this job involves: We are looking for an experienced HVAC Technician to join our team at a biotech company. The ideal candidate will possess expertise in air handling equipment, air filters, refrigeration systems, and HVAC systems. They will be responsible for ensuring compliance with regulations, monitoring and maintaining equipment, performing repairs, troubleshooting issues, and following safety protocols.In addition to strong technical skills, the successful candidate will demonstrate a commitment to adhering to regulations and working in a team-oriented and customer service-focused environment. They may be assigned to install, regularly monitor, troubleshoot, maintain, repair, or upgrade building automation systems. It will be important for the candidate to achieve and maintain all required certifications, as well as possess a working knowledge of relevant codes and regulations related to the field.This position is expected to work independently with minimal supervision while being an effective team player. The incumbent will also need to maintain knowledge of and ensure compliance with all applicable codes, regulations, standard operating procedures (SOPs), and work instructions.What your day-to-day will look like: Operates and maintains building air handling units, refrigeration machinery, auxiliary equipment and other plant mechanical equipment including but not limited to vacuum, air conditioning, coolant and heating, ventilation, fume hoods, bio-safety cabinets, water systems, compressed air, specialty water (DI, RO, WFI, etc.) and exhaust systems required to maintain proper temperature, pressure, humidity, or other such operating conditions necessary to meet client’s needs. Observe and adjust related valves, switches, recorders, charts, indicators, and thermometers for control purposes. Keep logs of and maintain required conditions throughout assigned areas, anticipate and detect equipment failure and locate trouble or faulty equipment and make necessary adjustments, replacements, or tear down for repairs to prevent loss in scientific media, research, or manufacturing. Overhauls and installs equipment as required. Advised and instructs others assisting the equipment operations and in performing maintenance and repair work. Conducts testing and documentation for fume hood and exhaust lab device certifications as specified in the site standards.The incumbent may be assigned to install, periodically monitor, troubleshoot, maintain, repair or upgrade building automation systems. Achieves and maintains all appropriate certifications, as well as a working knowledge of all applicable codes and regulations related to the field. Works with minimal supervision in a team-based environment while maintaining knowledge of, and compliance with, all applicable codes, regulations, SOP’s, and work instructions as required. Desired or preferred experience and technical skills: Trade license, apprenticeship, or equivalent trade experience vocational certification preferred.Previous experience working in life sciences environment desired.Required Skills and ExperienceHigh School diploma or equivalent.Must have a Universal EPA certification.Must have a valid driver’s license.Minimum of 5 years of experience.Preferred experience with Siemens or Honeywell BAS systems.EPA Universal certification (Refrigeration) required.Must possess adequate skills to perform job functions with minimal supervision.Ability to work in a customer service environment and interact with clients.Team player with strong interpersonal skills.Fluent in English with conflict resolution skills and effective communication in oral and written reports.Proficient in computer-based systems and programs, including Microsoft Office and Outlook.Must be physically capable of performing required job functions, including lifting, bending, and moving in a safe manner.Must be able to lift 50 pounds.Work at heights and perform overhead work as required.Skilled and physically able to operate electric hand tools, work on ladders, carry tools, lift and transport heavy loads, operate necessary equipment, and drive a motor vehicle.Able to work in confined spaces such as closets, crawl spaces, attics, vaults, etc.Environmental conditions will vary based on job requirements, including the ability to work outdoors in all types of weather conditions.#HVACjobs

Republic Services is a leader in Environmental Services, partnering with customers to create a more sustainable world.We are Sustainability in Action our promise to be environmentally responsible and to help our customers be environmentally responsible too.Why choose Republic Joining Republic isn’t just about taking on a new job, it’s about making a commitment to create a more sustainable world together. Our people provide an essential service, serving and impacting customers, neighborhoods, and communities everywhere. As a company, we are proud of our values and encourage those who share in our aspirations to join our team: We protect our colleagues and communities through safe practices everywhere, every day.We are committed to serving our customers and communities by going above and beyond to exceed expectations.We take action to improve neighborhoods and communities by being environmentally responsible and creating a more sustainable world.We are driven to deliver results in the right way.We encourage a human centered culture that honors the unique potential and dignity of every person.M-F 2-3pm start - 10:30pm-12am endEvery other Saturday 6 hour shifts starting at 8amPay depends on experience $28-32/hr + $2 shift differentialPOSITION SUMMARY: With direct supervision from a Lead Technician, Maintenance Supervisor or Maintenance Manager, a Maintenance Technician B performs repair and maintenance work on diesel and non-diesel equipment and trucks including, but not limited to, chassis components, vehicle refuse bodies and control systems, hydraulic electrical, air brake systems, general engine work, HVAC components, suspension, drive train and steering systems. The Maintenance Technician B may also perform basic tire work, such as replacement, tire rotation, and tread depth checks. Enjoy the benefits of working on a single fleet with state-of-the-art equipment, supporting our drivers as they run their routes and servicing some of the most technically advanced vehicles on the road.Tackle a new challenge every day;Maintain and repair highly intricate and powerful machinery;Receive training on new technologies and equipmentWork a regular shift in a stable industryBe recognized for exceptional performanceServe your community and your customersFollow strong career paths for professional growthEnjoy competitive wages and benefitsJoin us and help make a positive impact on your community, your environment and your worldPRINCIPAL RESPONSIBILITIES:• Maintains a working knowledge of, and moderate skill proficiency in, the following vehicle components and systems, with the ability to perform preventative and repair maintenance functions, both on-site and on the road.Chassis component repair and maintenance.Refuse bodies, including control, hydraulic and electrical systems; and air and hydraulic braking systems.Engine repair and maintenance.Suspension, drivetrain and steering systems.Heating and air conditioning.Performs line maintenance welding and fabrication.Safely provides road service when necessary to ensure that the Company’s equipment is returned to operation in a safe and efficient manner.Identifies the source of the malfunctions using a variety of electronic tools.Completes applicable Company training programs.Performs other job-related duties as assigned or apparent.The statements herein are intended to describe the general nature and level of work being performed by employees and are not to be construed as an exhaustive list of responsibilities, duties, and skills required by personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company..QUALIFICATIONS:Basic understanding of work order labor time standards.Prior experience with, or knowledge of, maintenance work to be performed on Classes 1-5 light/medium duty and heavy-duty Class 7-8 trucks, aircraft, or ships.Automotive Service Excellence (ASE) Certifications (T1-T8) are a plus but not required.Commercial Driver’s License is a plus but not required.Valid Driver’s License.MINIMUM REQUIREMENTS:Minimum of 1 year of experience in a technician position demonstrating knowledge of both gasoline and diesel powered equipment diagnosis and repair or will be graduating from an accredited automotive college or technical school within the next 3 months.Ability to perform basic inspections with limited supervision in some (not all required) of the following heavy truck, or automotive systems: suspensions & steering; general engine, transmissions, brakes, electrical, hydraulics, drive train, diesel emissions.Rewarding Compensation and BenefitsEligible employees can elect to participate in:• Comprehensive medical benefits coverage, dental plans and vision coverage.• Health care and dependent care spending accounts.• Short- and long-term disability.• Life insurance and accidental death & dismemberment insurance.• Employee and Family Assistance Program (EAP).• Employee discount programs.• Retirement plan with a generous company match.• Employee Stock Purchase Plan (ESPP).The statements used herein are intended to describe the general nature and level of the work being performed by an employee in this position, and are not intended to be construed as an exhaustive list of responsibilities, duties and skills required by an incumbent so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company.EEO STATEMENT:Republic Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, protected veteran status, relationship or association with a protected veteran (spouses or other family members), genetic information, or any other characteristic protected by applicable law.

Clean Harbors in South Plainfield, NJ is seeking a Class B CDL Driver to operate light and heavy-duty trucks/work equipment at our customer sites; some of the vehicles operated include Vacuum Trailer, roll-off trailers, van trailers, box trucks and high-powered vacuum loaders. This role is responsible for performing driving and non-driving duties on and off customer sites associated with hazardous waste clean-up. Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Why work for Clean Harbors Health and Safety is our #1 priority and we live it 3-6-5!Focus on maintaining sustainability and cleaning the EarthComprehensive health benefits coverage after 30 days of full-time employment including 401K with Company matchOpportunities for growth and development for all the stages of your careerCompany paid training and tuition reimbursementEnsure Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and always acting in a safe mannerOperate commercial trucks and assist field laborers when needed (team atmosphere where everyone helps)Operate a variety of Class B trucksLoading and unloading of trucksEnsure customer satisfaction at time of service.Proper placarding of vehicles to meet Company and DOT requirements/regulationsMaintain daily logs, time sheets, and various reportsFollow all local, state (provincial) and federal compliance regulations and rulesSafely operate vehicles in accordance with U.S. DOT, local, state (provincial) and federal requirementsSafely observe all corporate operating guidelines and proceduresObserve all company environmental health and safety operating guidelinesPerforms other duties as assignedBy position, ability to be on call for emergency response on rotating basis every other weekBy position, site-remediation, equipment decontamination, and the handling of hazardous materials.Valid Class B CDLAbility to operate a manual transmissionObtain Hazmat and Tanker endorsement within 90 days of employmentAbility to use various mobile devicesPerform physical functions per job requirementsPer OSHA's Respiratory Protection Standard, 29 CFR 1910.34, employees in positions requiring respirators are required to meet facial hair standards. Preferred Qualifications: Commercial driver experienceHazmat and Tanker endorsementPrevious Hazmat experiencePrevious manual labor experienceClean Harbors is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or based on any other federal, state/provincial, or local protected class.Clean Harbors is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact or 1-.Clean Harbors is a Military & Veteran friendly company.*CH#LI-LT1

AutoReqId: 20315BR Pay Class: Hourly Hourly Pay Rate: 39.72 Department: Maintenance Line of Business: Cement Operations Position Type: Full-Time Job Posting: Heidelberg Materials is seeking an Electrician for our Nazareth Cement Plant located in Nazareth, PA. Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. What You'll Get To Do Are you in the market for a job that is Electrifying Heidelberg Materials is seeking a qualified Electrician who will install, maintain, and repair electrical/electronic systems, components and apparatus for machinery and equipment in an industrial setting. This role is a great opportunity for motivated individuals who perform installation, maintenance repair, design and troubleshooting to electrical and instrument equipment. Test and diagnose electrical instrumentation and control problems.Discusses operation variations with supervisors or other electrical and maintenance workers to diagnose problem or repair machine.Installs power or instrumentation wiring and conduit for machinery and equipment.Replaces or repairs faulty electrical components of machinery, such as relays, motors, switches, printed circuit boards and position sensing devices. Rewires motors.Uses PC and PLC programming to troubleshoot process control issues for automated machinery. Calibrates instrumentation using programing devices.Troubleshoots and repairs variable speed drives, process analyzers and measuring equipment.Assists with project research to include system dynamics and control loop algorithms, and contributes to system design for retrofit and upgrade of existing equipment.Plans layout of wiring and system installation within facility.Reads blueprints, schematic drawings and manuals to determine work procedures and diagnose problems. Will update prints to reflect field changes.Uses standard hand tools, instruments and power tools as required.Follows oral or written instructions and work assignments. Completes checklists and work orders as required. Maintains records and logs of preventive electrical maintenance activities.Maintains general cleanliness of work areas. Maintains all tools and equipment used on the job in good working order.Participates in the training of apprentices and new employees.Follow plant and MSHA Safety Policies, including the proper use of Personal Protective Equipment. Maintain an awareness of plant environmental standards. Takes corrective action to address minor problems or reports compliance issues to appropriate supervisor for resolution. What We Are Looking For Must have experience with480- and 4160-voltmotors and controls who will be able to install, maintain, and repair electrical/electronic systems, components and apparatus for machinery and equipment in an industrial setting.Associate’s degree or equivalent from a two-year college or technical school.Certification as an Industrial Electrician; or equivalent combination of education and training.System knowledge of HMI and PLC control systems.Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals; Ability to calculate figures and amounts such as proportions, area, circumference, volume, percentages, and ratios; and, Ability to apply concepts of basic algebra and geometry in practical situations.Ability to work extended hours and irregular schedulesAbility to work as a team member, as well as individually, on complex issuesExcellent communication skills, both verbal and writtenPhysical Requirements: sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below shoulder, work extended periods of time in same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 75 lbs., work in confined spaces, capable of wearing respiratory and other personal protective equipment No search firms please Heidelberg Materials is a drug free workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Position Summary: The production line mechanic will be responsible for all production maintenance, including product quality control, line maintenance, and repair of line machinery and equipment. This role involves applying mechanical expertise in determining work methods and procedures for producing quality product. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Responsibilities: Follow, without exception, all work instructions and safety policies, including use of all PPE and safety equipmentExamine machine controls to install plate changeovers and start up machines for production needs when requiredPerform routine preventive maintenance checks on all production equipment and machineryRepair basic mechanical components and replace parts on machines such as bearings, filters, wiring, valves, gauges and switchesObserve and listen to mechanical devices in operation to locate causes of problemDismantle devices to gain access to and remove defective partsAdjust functional parts of devices and control instrumentsInspect used parts to determine changes in dimensional requirementsLubricate and clean machinery and support equipment to maintain housekeeping and preventive maintenance standards within the plantDocument and track changeover times and recordAccomplish all work orders to maintain safety; reduce downtime; decrease scrap; improve quality production; and improve plant efficiencyFollows all safety rules and procedures including Lockout/Tagout program, housekeeping, and 5S standards and observes the operations to insure a safe work environmentPerform other related duties as assigned Requirements: High School Diploma or GED3-5 years’ experience in a maintenance of Injection Molding Presses within a manufacturing environment; or equivalent combination of training and experienceAbility to interpret documents such as procedure manuals, blue prints, schematics, charts, diagrams, etc.Ability to use precision measuring devices including amp meters, electric meters, and hydraulic gaugesBasic understanding of systems, equipment and schematicsAbility to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Good troubleshooting skillsBasic mathematical skills used to add, subtract, multiply, divide, and use decimals and fractionsAbility to perform work in a mature and professional manner, demonstrate personal responsibility, and perform all assigned duties Physical Demands: While performing the duties of this job, the employee is frequently required to walk. The employee is required to stand for long periods of time; use hands to finger, handle, or feel; reach with hands and arms; stoop, kneel, couch or crawl; and talk or hear. The employee must occasionally lift up to 50 lbs. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.Do you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Fleet Mechanic to join our UniFirst community. As a Team Partner in the Maintenance Department, you will be responsible for carrying out all corrective, preventative, and predictive maintenance on fleet vehicles to ensure the safe, efficient, and reliable operation. In addition, you will be responsible for maintaining fleet vehicles in a safe working condition meeting DOT or other regulatory requirements. At UniFirst we have a standard Monday - Friday work week with periodic and weekend overtime. We have an immediate opening and provide on the job training. Pay & Benefits: On the job training & great hourly pay + 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Direct Payroll Deposit, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. What's in it for you Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth. Culture: Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds. We believe our diversity makes us who we are, and we strive every day to build a culture where everyone feels welcome. What you'll be doing: Verify all vehicles and drivers are properly licensed. Ensure all preventative maintenance is performed when due. Verify that the appearance of fleet vehicles meet UniFirst standards. Sustain a clean, safe, and maintained garage. Purchase parts and monitor quotes for best pricing and quality. Provide back up for a shuttle run when needed. Ensure all corrective, preventative, and predictive maintenance on fleet vehicles is completed and up to date. Maintain fleet vehicles to ensure they are in safe working conditions, meeting DOT or other regulatory requirements. Utilize a Computerized Maintenance Management System. Perform other duties as assigned by leadership. Qualifications What we're looking for: High School Diploma and/or GED equivalent is preferred Must be 21 years of age or older. Associates degree from an accredited technical school and equivalent experience is preferred. Valid driver's license and a safe driving record are required. Must meet DOT requirements. Must be able to perform all vehicle repairs, have diagnostic knowledge with GM drivability, and some diesel experience is highly preferred. Must be willing to work overtime as needed and perform occasional road calls. 3 - 5 years of proven medium to heavy-duty vehicle repair including: Preventative Maintenance, tire & wheel, air & hydraulic brakes, drivetrain, computerized diagnostics, suspension, electrical and A/C. Proven computer skills and ability to use diagnostic software Ability to lift up to 80lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 2 billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's "Best Companies to Sell For" list and recognized on Forbes magazine's "Platinum 400 - Best Big Companies" list. As an 80-year old company focused on annual growth, there's never been a better time to join our team.UniFirst is an equal employment/affirmative action employer. If you need accommodation for any part of the application process because of a medical condition or disability, please send an e-mail to or call to let us know the nature of your request. UniFirst Recruiters and/or representatives will not ask job seekers to provide personal financial information when submitting a job application. Please be vigilant as such requests for information may be fraudulent.

Additional Information: Up to $32/hr7am-3pmMust be flexible for emergencies Excellent BenefitsGrowth Opportunity1400 Evans Rd Ambler PA 19002 Overview: The HVAC Technician will perform a variety of work in HVAC and general maintenance and repairs to buildings, facilities, and equipment. Position Summary: RESPONSIBILITIES:Perform routine maintenance on HVAC units, troubleshoot, install, repair, and replace when needed.Conduct HVAC inspections and change filters as needed.Repair and maintain buildings.Complete set-ups and tear down for scheduled campus events.Perform general maintenance using basic skills in carpentry, plumbing, painting, masonry, appliance repair, and electrical wiring.Operate and maintain tools used in the maintenance and repair of building facilities.Remove snow with shovels, blowers, and plows when necessary.Provide logistical support for campus activities and maintain a campus environment that is safe, clean, and conducive to learning.Assist fire drill, lockdown, and other safety exercises.Assist in managing traffic flow and parking throughout campus.Perform on call duties as needed/assignedBENEFITS:Competitive salary and benefits package.Year-round workWork independently throughout the dayPaid time offPaid holidaysBenefitsWeekend work available Qualifications: High school or equivalent (Required)3 years of HVAC Experience:______3 years of experience in general maintenance3 years of experience in one or more building tradeExperience in CMMS software program(s)Experience in operating Building Automation/Energy Management SystemsHVAC/R CertificationRefrigerant LicenseMembership in related professional organization(s) desirableMust submit to a Motor Vehicle Check and maintain a valid driver’s license.Possess a high level of discretion and the ability to problem solve and think quickly on your feet.Enjoy working independently and within a team structure.Flexible, dependable and takes ownership of work.Possess time management, communication, and organizational skills.Must be flexible, friendly, and able to handle difficult situations.PHYSICAL REQUIREMENTS:Ability to walk for long periods of time around campusAbility to lift and/or move up to 50 poundsWork from laddersClimb stairsStand, walk, sit, bend, reach, stoop, kneel, crouch, and crawlWork in an outdoor environment, with exposure to inclement weather and varying temperaturesSit at a desk working on a computerCampus Services Group, part of Healthcare Services Group, Inc. continually seeks out motivated and professional leaders to join our team! Our firm commitment to training provides all of our associates with ample opportunity for self-improvement and professional growth. We offer equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, HCSG complies with applicable state and local laws governing nondiscrimination in employment in every location where the company has facilities.

BluSky Restoration wants to hire YOU as a full-time Restoration Technician. This position has a starting pay of up to $25 an hour,depending on experience!Benefits Include:Medical, Dental, and Vision Insurance401K Plan with guaranteed matchPaid Time Off and HolidaysLife & Disability InsuranceEmployee Assistance ProgramsHealth and Wellness ProgramsBluSky apparelWhat does a Restoration Technician do They fix broken buildings!Whether it's a broken pipe or a major storm, when people have an emergency, they turn to us. That's where YOU come in - you'll respond to emergencies and restorethe lives of our customers.At BluSky, our core values are Excellence, Teamwork, Integrity, Innovation, Empathy, Passion, and, most of all, FUN!We are a culture of family.Previous experience and IIRC certifications are a plus but not required. We will help you obtain the training and development you need.Brief Description:The Restoration Technician is a first responder on property loss situations and helps mitigate damage in residential and commercial structures. Technicians are responsible for water damage mitigation, structural board-up and security, on-location cleaning, microbial remediation, content pack-outs, content processing/deodorization, content storage, and handling.Responsibilities:Water extraction and mitigationFire and smoke cleaning and restorationMicrobial remediationVandalism, crime scene, and biohazard clean-upDemolition (Demo Day!)Field management and supervision of all temporary labor personnelProvide the highest level of customer service with empathyAll other duties or projects as assignedQualifications:Possess and maintain a valid driver's licenseSuccessfully pass a national criminal background check and motor vehicle report background checkSuccessfully pass a pre-employment drug screeningAbility to be on-call 24 hours a day1 year of restoration industry or maintenance experience preferredWORK ENVIRONMENT AND PHYSICAL JOB DEMANDS:The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. The noise level in the work environment is usually quiet.The physical demands described here are representative of those that must be met by an employee to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.The employee must occasionally lift and/or move up to 25 pounds. While performing the duties of this job, the employee is regularly required to sit, use hands and fingers, reach with hands and arms, talk, and hear. The employee is required to move and walk around the office regularly.TRAVEL:Occasional travel. (Less than 25% of the time.) Some out-of-area and overnight travel may be expected for training or meetings.COMPENSATION:BluSky offers a competitive base pay between $15 - $25 per hour and a comprehensive benefits package that includes: a matching 401(k) plan, health insurance (medical, dental, and vision), paid time off, paid holidays, disability, equipment appropriate to the position (i.e., laptop, smartphone, etc.), and corporate apparel allowance.EEOC:BluSky is dedicated to the principles of equal employment opportunity. BluSky prohibits unlawful discrimination against applicants or employees on the basis of age 40 or over, race, sex, color, religion, national origin, disability, genetic information, sexual orientation, or any other applicable status protected by Federal, State, or local law.It is and will continue to be the policy of BluSky that all persons are entitled to equal employment opportunity based on their individual qualifications, performance, and potential without regard for any protected status, as required by state and federal law.

PetIQ provides convenient and affordable pet health and wellness products and veterinary services to pets and their families through retail and ecommerce channels across the country. We are advocates for pet parents, because we believe that all pet parents should be able to provide necessary care that enhances the lives of their pets. Why join the PetIQ Team Great company cultureCompany is in growth mode, come be a part of our exciting growth Job Overview Collect payment, dispense and label medication, and review discharge paperwork with pet parentsSafely restrain / hold pets for wellness procedures including vaccines, nail trims and microchippingCollect and prepare blood and fecal samples for laboratory testingDrive vans to and from clinics responsibly; load and unload the vans upon arrival anddepartureMake recommendations for services and products to every pet, every time, based on the pet’s lifestyle and an understanding of canine and feline diseasesMaintain a clean and sanitary work environment by disinfecting surfaces and equipment between each petAbility to execute inventory processes by maintaining accurate product counts and managing expiration dates for vaccines and productsPromote a culture of safety in your clinic and live our values while reinforcing our brand promise with pet parents, partners, and team membersProvide customer service to pet parents by answering questions and assisting them through the clinic processAchieve goals as set by your manager including dollars per pet, pets per clinic, preferred product and microchips soldScan pets for microchipsPrepare canine and feline vaccinesEstablish and maintain effective relationships with pet parents and partnersOther duties as assigned Minimum Qualifications: Must be 18 years of age or olderValid driver’s licenseMust be able to work weekends, varied weekdays and times, occasional overnightsReliable transportation to and from workPresent professional appearance and positive conductPunctuality and dependability highly valuedMust be able to drive a company vehicle for long hours and in various terrain and weather conditions. Portion of workday spent in vehicle.Some outdoor clinic work and activities may be necessaryMust be able to work for prolonged periods of time in the field, including 12–14-hour days Education Requirements: High School Diploma or equivalent required Preferred Qualifications: Previous customer service sales experience Navigate computer software (iPad, Bluetooth devices and more)Strong organizational, problem-solving, and analytical skillsAbility to work within a team to meet team goals and objectivesComfort level in approaching host location’s customers to educateabout our clinicsAbility to adapt to changing priorities Physical Requirements: Ability to perform the essential job functions consistently safely and successfully with the ADA, FMLA and other federal, state, and local standards, including meeting qualitative and/or quantitative productivity standardsAbility to maintain regular, punctual attendance consistent with the ADA, FMLA and other federal, state, and local standardsMust be able to lift and carry up to 50 lbs.

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:Seeking a reliable Automotive Technician to join our outstanding fleet maintenance team. The Automotive Technician will be responsible formaintaining a diverse range of equipment, including delivery vehicles, heavy-duty on-road tractors, and trailers from various manufacturers. These vehicles' propulsion systems include diesel, gasoline, and alternative technologies such as compressed natural gas, liquefied natural gas, propane, hybrid, and electrical in some locations.Automotive Technicians must be skilled in troubleshooting and maintaining various systems, including hydraulic brakes, air brakes, electrical systems, and engine controls.Responsibilities and DutiesBends, stoops, squats, kneels, crouches, crawls, climbs ladders and stairs, stands, walks, and turns/pivots frequently throughout duration of workdaySits infrequently, as required,?throughout duration of workdayExercises simple hand grasping, power hand grasping, fine hand manipulation, and reaching from foot level to above shoulder level as necessary to complete assigned tasksOperates standard and manual transmissionOperates power and pneumatic toolsRequirementsMust have an active driver’s license issued by the stateMeets D.O.T requirements required by job assignmentMust be willing to work 2nd?or 3rd?shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location’s need.??Must possess the required hand tools required to perform the applicable job assignment. ?Knowledge and SkillsCurrent documented automotive mechanical experienceExperience using diagnostic equipment, scan tools and personal computerPossesses full complement of personal hand toolsClass A/B or A Commercial Driver's License (CDL) - REQUIREDDependable with ability to report to work on a regular and timely basis and complete scheduled workday on a consistent basisAvailable to work varying shifts, additional hours and/or overtime depending on service needsWears personal protective equipment as requiredWorks in an environment with variable temperatures and humidity (climatic conditions), exposure to cleaning materials, petroleum products, dust, dirt, and noise, outside inclement weather, etc.Works cooperatively in a diverse work environmentCommunicates effectively?through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditionsOur compensation reflects the cost of labor across several US geographic markets. The starting pay for this position is $30.71 per hour. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions.Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase program.Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

" POSITION OVERVIEW:Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1 ext. 2862 or by sending an email to . Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products "

Job Description:Position Details:1st Shift, Monday-Friday 7am - 3:30pmPay starts at $31.00 per hour or more based on experienceWe Deliver the Goods: Competitive pay and benefits, including Day 1 Health & Wellness Benefits, Employee Stock Purchase Plan, 401K Employer Matching, Education Assistance, Paid Time Off, and much moreGrowth opportunities performing essential work to support America’s food distribution systemSafe and inclusive working environment, including culture of rewards, recognition, and respectPosition Purpose:We value the safety of our associates! The Diesel Technician - Class A keeps our associates safe by repairing, maintaining, and overhauling all company fleet diesel equipment to ensure a safe operation for associates’ usage and ensure compliance standards are met.Primary Responsibilities:The Diesel Technician – Class A diagnoses and repairs medium to heavy-duty trucks, trailers, reefer units, convertor dollies and maintenance vehicles under minimal supervision. Responsibilities may include, but not limited to:Completes overhauls and rebuilds of heavy-duty diesel engines and transmission.Completes and performs preventative maintenance on minor repairs and standard component inspections/ repairs of fleet diesel equipment (tractors, trailers, refrigeration units). Identifies root cause of basic failures/conditions and perform repairs as required.Inspects brake systems, steering mechanisms, wheel bearings, and other important parts to ensure that they are in proper operating condition which may require replacement of parts.Ensures equipment has required licensing and registration prior to being deemed as “roadworthy”.Completes thorough documentation for work orders of repairs and preventative maintenance through the online Enterprise Asset Management system.Installs, replaces, and repairs onboard computers.Inspects brake systems, steering mechanisms, wheel bearings, and other important parts to ensure that they are in proper operating conditions.Performs routine maintenance such as changing oil, checking batteries and lubricating equipment and machinery requiring the use of hand tools such as screwdrivers, pliers, wrenches, pressure gauges, and precision instruments, as well as power tools such as pneumatic wrenches, welding equipment, and jacks and hoists.Trains/provides guidance to other Mechanics.Performs other related duties as assigned.Qualification:High School Diploma/GED or Equivalent 5 - 7 years of proven medium to heavy-duty vehicle repair including PM's, tire & wheel, air & air disc brakes, diagnosis, computerized diagnostics, electrical troubleshooting, electronic component repair and a minimum of 2 years’ experience in refrigeration &/or overhauls and rebuilds of heavy-duty diesel engines and transmissionsCompany descriptionPerformance Foodservice, PFG’s broadline distributor, maintains a unique relationship with a variety of local customers, including independent restaurants and hotels, healthcare facilities, schools, and quick-service eateries. A team of sales reps, chefs, consultants, and other experts builds close relationships with customers providing advice on improving operations, menu development, product selection, and operational strategies. The Performance team delivers delicious food but also goes above and beyond to help independent restaurant owners achieve their dreams.Awards and AccoladesPerformance Food Group and/or its subsidiaries (individually or collectively, the "Company") provides equal employment opportunity (EEO) to all applicants and employees, regardless of race, color, national origin, sex, marital status, pregnancy, sexual orientation, gender identity, religion, age, disability, genetic information, veteran status, and any other characteristic protected by applicable local, state and federal laws and regulations. Please click on the following links to review: (1) our EEO Policy; (2) the "EEO is the Law" poster and supplement; and (3) the Pay Transparency Policy Statement.

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationA High School Senior (age 17 or older)*, High school diploma, a GED, or 15 college semester hours *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Move forward with us! At NJ TRANSIT, you'll join us in transforming the third-largest transportation agency in North America. We are committed to delivering safe, reliable service that gets customers to their destinations on time--and we're looking to hire talented folks with a love of learning to make it all possible. Location:Neptune Garage Roles and Responsibilities: Adjust and reline air and hydraulic brakes, align wheels, tighten bolts and screws, and reassemble equipmentAttach test instruments to equipment and read dials and gauges to diagnose malfunctionsMust be qualified to disassemble and overhaul internal combustion engines, pumps, generators, transmissions, clutches, and differential unitsInspect brake systems, steering mechanisms, wheel bearings, and other important parts to ensure that they are in proper operating conditionInspect, repair, and maintain automotive and mechanical equipment and machinery such as pumps and compressorsInspect, test, and listen to defective equipment to diagnose malfunctions, using test instruments such as handheld computers, motor analyzers, chassis charts, and pressure gaugesPerform routine maintenance such as changing oil, checking batteries, and lubricating equipment and machineryMust be qualified to install or rebuild diesel enginesRecondition and replace parts, pistons, bearings, gears, and valvesRepair and adjust seats, doors, and windows, and install and repair accessoriesMust be qualified to fix and maintain parts of the engine, such as fuel injection systemsExperience using hand tools and power tools as part of daily work routineOther duties as directed and or assigned, to include and to ensure the safe operation and efficiency of the department Education, Experience, and Qualifications: High school diploma or equivalent (GED) required. Must be a minimum of 21 years of age.Must be able to work flexible hours.Be able to pass the pre-employment physical and background checkVarious Positions: 0-15 years automotive or diesel mechanicalexperience.Must be able to diagnose, troubleshoot, and repair all vehicles and equipment in service with minimal supervision.Must possess a CDL license with air brakes and a passenger endorsement or have the ability and willingness to obtain one609 air conditioning certification and at least three H or T series ASE certifications preferred At NJ TRANSIT, diversity and inclusivity are vital to our success as we are committed to hiring individuals from diverse backgrounds, experiences, abilities, and veteran status. As an Equal Opportunity Employer, we encourage all qualified applicants to apply and join our team. Learn more about NJ TRANSIT! Sign up to receive an invitation to our next live information session atWWW.NJTRANSIT.COM/BEST This position is deemed safety sensitive per the Department of Transportation (DOT) Drug and Alcohol Testing Regulations. The DOT Drug and Alcohol Testing Regulation 49 CFR Part 40 does not authorize the use of marijuana for any reason. It is unacceptable for any safety-sensitive employee subject to drug testing under DOT regulations to use recreational or medical marijuana. The prohibitionincludes any derivative of marijuana such as CBD oils, teas, etc. The use of recreational and medical marijuana is a violation of NJ TRANSIT’s Drug and Alcohol-Free Workplace Policy for safety-sensitive employees.

$26.00/hourUp to $1,250 Retention BonusShift Premium may ApplyImmediately hiring! We're looking for responsible, detailed people who are ready to accelerate their automotive repair career! Whether you have worked in an auto garage or car dealership, this job is for you ! Join our team of driven professionals at Avis Budget Group enterprise. What You'll Do: As an automotive technician, you will be responsible for conducting essential repairs on a diverse range of vehicle brands and models, requiring minimal technical oversight. Your tasks will encompass various maintenance activities such as oil changes, lubrication, tire repairs, and potentially warranty repairs based on your proficiency level. In addition, you may support our skilled mechanics in handling intricate repair procedures. Perks You'll Get: Bi-weekly hourly wage (New York and Puerto Rico: weekly wage)On-the-job training to expand your automotive abilities and help to obtain ASE CertificatesPaid time offMedical, d ental and o ther i nsuranceFlexible spending account opportunity to contribute up to $270 as a tax-free benefit for public transportation or parking expensesRetirement benefits (401k)Employee discounts, including discounted car rental and discounted prices on the purchase of Avis/Budget cars* Above perks may vary based on full-time/part-time status and location What We're Looking For: Valid Driver's License and good driving recordAt least 2 year s of auto repair experience or coursework with automotive certifications1 ASE certificat ion (ability to acquire 2 additional ASE certificat ions within first year)Knowledgeable in areas covered by the ASE certification programs, including, but not limited to, Engine Repair, Drive Train/Axles, Suspension/Steering, Brakes, Electrical, Heating/Air Conditioning, Engine Performance and Light Vehicle/DieselComfortable working in a mechanical shop with moderate or loud noise levelsMust have a complete set of tools required for auto repair and maintenanceBasic computer skills including typing, data entryMust be able to lift up to 50 pounds, continuously stand, bend, reach, walk, sit and kneel frequently , enter, exit and drive vehiclesMust be 18 years of age and legally authorized to work in the United States Previous Original Equipment Manufacturer (OEM) experience preferred, providing an added advantage ! Who We Are Here at Avis Budget Group, you will be joining a team of 25,000 driven people, performing with purpose. Together, we're moving the future of transportation forward with our innovative, customer-focused solutions. Our culture is performance driven, where we encourage and support each other to be at our best through leadership, training, tools, and rewards. We are proud to make a positive difference to the lives of our colleagues, customers, and communities where we operate . Avis Budget Group is an Equal Opportunity Employer - Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other category protected by applicable law . This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. This position may be with any affiliate of Avis Budget Group . NewarkNew JerseyUnited States of America

Be part of the future!We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference.What we offer:Competitive Starting PayPaid TrainingTuition reimbursementGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceHealth Savings Account (HSA)Life Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramAnd More!What you will doThe HVAC Service Sales Rep is critical to the overall growth and profitability of the HVAC Service business! The chosen candidate will be responsible for initiating, establishing, and building profitable service relationships between new customers and JCI. Focus on selling renewable maintenance agreements as the key building block for establishing these relationships. The salesperson will work within an assigned geographic territory, working as part of a local branch office and teaming with sales and operations professionals within the branch. Uses sales tools to plan and document sales progress as well as increase business opportunity in current accounts. Expected to obtain and close business on a monthly basis. How you will do it Follows a disciplined and professional process to identify, target and qualify prospective new customers; takes advantage of market conditions and networks effectively to uncover new leads and contacts. Contacts prospective customers and schedules appointments. Builds a referral network to identify new customers.Conducts sales calls designed to identify key sources of problems and/or dissatisfaction confronting Facility Directors in operating and maintaining heating/cooling, ventilation and control system equipment.Develops a sense of urgency to resolve needs and positions Johnson Controls as the supplier of choice. Proposes solutions to prospective customers needs through creative and innovative application of local branch service capabilities with a focus on selling renewable maintenance agreements with an emphasis on digital service offerings, sustainability, and decarbonization. Understands the customer's business and speaks their language.Reviews and finalizes proposals with prospects and secures their commitment to the Johnson Controls solution.Conducts customer kick-off meetings, resolves customer issues, creates pull-through opportunities, maintains service agreements, extends service agreements and supports the collections process.Keeps management informed of progress and account status using the Johnson Controls Salesforce.com tool and other means. Knows when to call for assistance from management to keep the sales process moving.Develops and implements territory marketing plans consistent with the Johnson Controls Building Solutions business strategy. Attends and presents at trade shows. Participates in professional organizations.Represents Johnson Controls professionally by conducting business according to the highest standards of quality, pride, integrity, and performance. What we look forRequired:2-3 previous progressive sales roles Preferred:Aptitude for technical knowledge with high level of attention to detail Enviable presentation skills complete with the ability to captivate in both individual and group communications. Selling of "service" and intangibles Exposure to sales methodologies, standards, and disciplines. Bonus Qualifications Knowledge of Building HVAC Systems Knowledge and experience in SalesForce.com Post-secondary educationSalary Range: HIRING SALARY RANGE: $39,100 USD-$ 52,200 USD(Salary to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This role offers a competitive Sales Commission Plan that will take into account project, quarterly, and annual margin. This position includes a competitive benefits package. For details, please visit the Employee Benefits tab on our main careers page at https://www.johnsoncontrols.com/careersJohnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Securitas Technology Corporation (STC) is a division of Securitas AB, the largest protective services provider in the world with over 370,000+ Securitas Heroes across the world.STC offers a full portfolio of video, access, intrusion, fire and integrated systems and services. As a leading systems integrator and alarm monitoring company, we deliver the STC Difference, serving countless long-term clients with solutions and services that protect their people, customers, and assets.STC is seeking technically minded individuals possessing experience with low voltage electronics specializing in electronic security solutions. Our teams are responsible for providing service on ST products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed.ResponsibilitiesRespond to trouble tickets to ensure application uptime and system performanceWork individually and as a team to diagnose and resolve application issuesExecute preventative maintenance tasks to maximize application availability and identify system faultsPerform routine configuration changes (user permissions, application configuration, etc.)Document all system modifications through a digital change control tracking systemProduce quality technical documentation describing the conceptual and quantitative facets of system deployment, intended for both a technical and non-technical audiencePerform pre-deployment end to end testing of all upgrades and major modificationsPerform on site installations of software upgrades and major modificationsMinimum RequirementsHigh School diploma required or equivalentFamiliarity installing and troubleshooting low voltage equipmentStrong working knowledge of commercial access control, CCTV, burglary alarm, intrusion systems, and fire alarmsStrong working knowledge of Microsoft OfficeStrong written and verbal communications skillsWorking knowledge of network communications and IP addressingExcellent problem solving and analytical skillsExcellent time management skillsPositive attitude and strong work ethicCertifications in enterprise grade CCTV and Access Control systems a plusSecuritas Technology Corporation offers comprehensive benefits including:Highly competitive salaryCompany training and industry leading certification programCompany VehicleCompany Cell PhoneMedical, Dental, Vision, and Life InsuranceCompany Paid Short Term and Long-Term Disability401K with 60% Match up to 6% of salaryPaid vacation, holiday and sick timeEducational AssistanceExceptional growth opportunitiesWide variety of employee discounts on travel, equipment, and more!We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

BlueTriton is a leading provider of spring and purified water products - the name behind your favorite bottled water brands. We are proud to offer an extensive portfolio of highly recognizable, responsibly sourced, and sustainably packaged spring water in addition to other quality products and services. Get ready to quench your thirst with exciting possibilities when you join BlueTriton for a fiercely good career doing work that matters.ReadyRefresh brings hydration that supports a healthy lifestyle, and convenience that preserves precious time and sustainability to help improve our world. Our ReadyRefresh branches and warehouses are where our iconic brands begin their journey to the customer.Job DescriptionReporting Location: Lakewood, NJSchedule:Monday - Friday, 12:00pm - 8:30pm, Day Shift, Full-TimeCompensation: $39.00 / Hourly (based on qualifications)Shift Differential: 6%-8% of base hourly rate shift differential paid for applicable hours workedSign On Bonus: $7,500 (payable per BTB terms)Our Benefits Package:401(k) matching; AD&D insurance; Uniform Allowance; Dental insurance; Disability insurance; Employee assistance program; Employee discounts and perks; Health insurance; Health savings account; Life insurance; Paid orientation; Paid time off; Paid training; Paid vacation; Prescription drug insurance; Safety equipment provided; Vision insuranceKey Responsibilities:Troubleshooting and repairing fleet vehicles and equipmentPrograming and recording assigned preventative maintenance tasksAssisting in education of the Route Sales Representatives’ pre and post-trip inspectionsReceiving and processing invoices for payment for multiple locations and dealing with vendorsMaintaining parts inventory and budgetsEnsuring safe work practices Oversee Fleet Technicians and provide direction as assigned by Lead TechnicianHelp schedule and support all work within the shopCoordinate trainingManage costs according to budget and daily completion of repairsEnsure DOT complianceProgram and record assigned preventative maintenance tasksMaintain shop housekeeping standards and prepare end of month reporting and/or any other administrative requirementsQualificationsTwo years technical education completed or have three years hands-on experienceProfessional technician certification (ASE), training and development for career advancementHigh school diploma, GED or equivalent work experienceAbility to handle physical requirements, including, but not limited to, repeated bending, stretching, twisting, and lifting up to 60 pounds in all work conditions (indoor and outdoor)A valid driver’s license and acceptable driving recordThe ability to obtain CDL B (with airbrake endorsement) within specified period of timeAbility to obtain ASE T4 (airbrake) certification within specified period of timeYour own personal toolsThe ability to work independentlyMicrosoft Office computer skills (including Excel)BlueTriton Brands, Inc. (“BlueTriton”) is a water and beverage company in North America that produces and distributes a portfolio of brands of spring water, purified water, and other beverages, which include Poland Spring®, Deer Park®, Ozarka®, Ice Mountain®, Zephyrhills®, Arrowhead®, Origin, Saratoga®, AC+ION®, Pure Life®, B’EAU®, and Splash Refresher. BlueTriton also owns and operates ReadyRefresh®, a water and beverage delivery service for homes and offices. Headquartered in Stamford, Connecticut, BlueTriton is a privately held company with operations and distribution primarily in the United States and Canada, employing more than 7,000 employees. BlueTriton manages water resources for long-term sustainability and helps protect more than 20,000 acres of watershed area owned by the company from harm and destruction. The company sources from 56 springs and has 30 production facilities across North America, with some verified to the Alliance for Water Stewardship Standard. BlueTriton is a Water Champion with The Water Council and has committed to be verified under their WAVE program.BlueTriton Brands is proud to be an Equal Opportunity and Affirmative Action employer, seeking to create a welcoming and diverse environment. We do not discriminate based on race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state, and local law. BlueTriton Brands is committed to providing reasonable accommodation for candidates with disabilities in our recruiting process. If you need any assistance or accommodations due to a disability, please contact us at

AutoReqId: 20315BR Pay Class: Hourly Hourly Pay Rate: 39.72 Department: Maintenance Line of Business: Cement Operations Position Type: Full-Time Job Posting: Heidelberg Materials is seeking an Electrician for our Nazareth Cement Plant located in Nazareth, PA. Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. What You'll Get To Do Are you in the market for a job that is Electrifying Heidelberg Materials is seeking a qualified Electrician who will install, maintain, and repair electrical/electronic systems, components and apparatus for machinery and equipment in an industrial setting. This role is a great opportunity for motivated individuals who perform installation, maintenance repair, design and troubleshooting to electrical and instrument equipment. Test and diagnose electrical instrumentation and control problems.Discusses operation variations with supervisors or other electrical and maintenance workers to diagnose problem or repair machine.Installs power or instrumentation wiring and conduit for machinery and equipment.Replaces or repairs faulty electrical components of machinery, such as relays, motors, switches, printed circuit boards and position sensing devices. Rewires motors.Uses PC and PLC programming to troubleshoot process control issues for automated machinery. Calibrates instrumentation using programing devices.Troubleshoots and repairs variable speed drives, process analyzers and measuring equipment.Assists with project research to include system dynamics and control loop algorithms, and contributes to system design for retrofit and upgrade of existing equipment.Plans layout of wiring and system installation within facility.Reads blueprints, schematic drawings and manuals to determine work procedures and diagnose problems. Will update prints to reflect field changes.Uses standard hand tools, instruments and power tools as required.Follows oral or written instructions and work assignments. Completes checklists and work orders as required. Maintains records and logs of preventive electrical maintenance activities.Maintains general cleanliness of work areas. Maintains all tools and equipment used on the job in good working order.Participates in the training of apprentices and new employees.Follow plant and MSHA Safety Policies, including the proper use of Personal Protective Equipment. Maintain an awareness of plant environmental standards. Takes corrective action to address minor problems or reports compliance issues to appropriate supervisor for resolution. What We Are Looking For Must have experience with480- and 4160-voltmotors and controls who will be able to install, maintain, and repair electrical/electronic systems, components and apparatus for machinery and equipment in an industrial setting.Associate’s degree or equivalent from a two-year college or technical school.Certification as an Industrial Electrician; or equivalent combination of education and training.System knowledge of HMI and PLC control systems.Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals; Ability to calculate figures and amounts such as proportions, area, circumference, volume, percentages, and ratios; and, Ability to apply concepts of basic algebra and geometry in practical situations.Ability to work extended hours and irregular schedulesAbility to work as a team member, as well as individually, on complex issuesExcellent communication skills, both verbal and writtenPhysical Requirements: sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below shoulder, work extended periods of time in same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 75 lbs., work in confined spaces, capable of wearing respiratory and other personal protective equipment No search firms please Heidelberg Materials is a drug free workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Responsibilities: Work with little to no supervisionClean and lubricate shafts, bearing, gears, and other parts of machineryTroubleshoot/repair machinery such as slitters, collectors, high speed welders, conveyors, and palletizersInstall and maintain pipe systems, hydraulic and pneumatic equipmentRepair and replace gauges, valves, pressure regulators, and other related equipmentBuilding maintenance including minor plumbing, welding, and general upkeepRepair and assess electrical issues as they ariseAble to familiarize yourself with our CMMS system and log labor/parts according to established expectationsMust be willing to work overtime, including weekends and off-shifts as requiredMust participate in on-call program and may be required to work additional hours on off shift due to on-call programUnderstands quality, PPE requirements, safety, and the importance of complying with safety policies and procedures. Requirements: High School Diploma or equivalent – Technical degree in maintenance-related field preferred2 years minimum experience as a maintenance mechanic in metal manufacturing environment with the ability to troubleshoot preferred but not requiredKnowledge of Good Manufacturing Practice ISO9001 standards for metals manufacturingPLC experience preferredExperience with and ability to use all types of welding, cutting, machine, and hand tools preferredExperience in high speed packaging, welding, and mechanical power transmission preferred Work Environment: While performing the duties of this job, the employee is frequently required to walk. The employee is required to stand for long periods of time, use arms and hands to feel or reach, stoop, kneel, crouch or crawl on occasion, talk and hear. The employee must occasionally lift and move up to 50 pounds. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. The employee is frequently exposed to moving mechanical parts. The employee may work with materials that could irritate eyes, skin and breathing. Appropriate personal protective equipment is required. The employee will be working near and/or with high-speed automated equipment. This may cause risk of injury if safety procedures are not followed. The work environment is often noisy and hearing protection is required.Do you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Tech II to join our UniFirst community! As a Team Partner in the Maintenance Department, you will handle repairs, maintenance, installation and troubleshooting of industrial equipment, systems, and components. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime! We have an immediate opening and provide on the job training.What's in it for you Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth.Culture: Our culture is what makes UniFirst an organization that stands out from the rest.Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful.What you'll be doing: Troubleshoot sources of equipment problems through observation and use of precision measuring and testing instruments. Assist other maintenance personnel with emergency and non-emergency repairs. Troubleshoot and repair Programmable Logic Controllers (PLC's) and associated control systems. Follow blueprints, schematics, operation manuals, manufacturer's instructions, and engineering specifications. Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required. Perform daily and weekly safety checks on boilers and make necessary repairs as required. Inspect motor, belts, fluid levels, replace filters and perform other maintenance actions in accordance with maintenance procedures. Performing basic welding activities to effect repairs on facilities and equipment. Inspect, clean and lubricate shafts, bearings gears and other equipment parts in accordance with work procedures and technical manual. Utilize a Computerized Maintenance Management System. Perform other duties as assigned by leadership. Qualifications What we're looking for: High school and/or GED is preferred. Two-year technical degree in an appropriate background is preferred. Must be at least 21 years of age. Knowledgeable in industrial maintenance of facilities and equipment. Minimum of 1 year of work experience repairing industrial processing equipment in a production environment required. Applicable military experience will be considered. Must pass UniFirst's maintenance knowledge assessment to be eligible for employment. Ability to read blueprints and schematics is required. Ability to read and understand maintenance literature printed in English required. Basic computer and Microsoft Office skills is required. Lockout / Tagout experience is required Ability to work overtime as needed is required. Valid driver's license and a safe driving record are required. Ability to lift up to 80 lbs. About UniFirstThe fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's "Best Companies to Sell For" list and recognized on Forbes magazine's "Platinum 400 - Best Big Companies" list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. There's a lot to love about UniFirst, where you come first.UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws UniFirst is an equal employment/affirmative action employer. If you need accommodation for any part of the application process because of a medical condition or disability, please send an e-mail to or call to let us know the nature of your request. UniFirst Recruiters and/or representatives will not ask job seekers to provide personal financial information when submitting a job application. Please be vigilant as such requests for information may be fraudulent.

Grounds Maintenance Associate Camden, NJ, USAReq #1207 Monday, July 1, 2024 About Us:EMR isone ofthe world’s leading metal recycling companieswith a history spanning decades.At EMR, our employees are the heart and soul of our organization. We are committed to creating a workplace that prioritizes the well-being and safety of everyone. Our company provides a supportive and inclusive community where everyone's ideas and contributions are valued.We believe in teamwork and collaboration.Our mission is to provide our customers with efficient and reliable metal recycling services while minimizing the environmental impact of our operations. EMR recycles ten million tons of material annually, everything from beverage cans to aircraft carriers. We work with a wide variety of metals including copper, aluminum, brass, and stainless steel and can recycle it into more than 200 different types of new sustainable raw materials.EMR offers our team a competitive salary and a comprehensive benefits package, including health insurance, retirement planswith company match, wellbeing benefits, employee assistance program and more. Join us and be a part of a team that puts people first! The Grounds Maintenance Associate is responsible for reporting to the assigned EMR location to ensure the upkeep of all outside areas. Duties include removing litter and debris from the area, ridding of all graffiti or unwanted signs, and weed abatement. This career requires the ability to work independently as well as in a team environment, and the ability to communicate effectively both written and verbal.I.Essential Duties & ResponsibilitiesRemoves all litter and other debris from sidewalks, street gutters, and alleyways.Responsible for removing of any graffiti or posters from light posts, trashcans, and fences from any EMR property.Responsible for weed abatement on all EMR property to ensure our locations are well kept.Provides written reports of broken infrastructures and graffiti on private property, as well as a daily report regarding accomplishments and tasks completed.Other job duties as assigned.II.REQUIRED SKILLS/ABILITIES/EXPERIENCEHigh School diploma or GED equivalent.Valid driver’s license.Ability to work independently as well as in a team environment.Ability to communicate effectively both written and verbal.III.Physical Demands and Work EnvironmentWork is generally performed throughout our Camden, NJ locations. Working hours may vary and evening or weekend work may be required. You will be required to stand for long periods of time. You may be required to lift up to fifty pounds. You employee may be working near moving mechanical parts and will be in outside weather conditions and is occasionally exposed to cold, wet and/or humid conditions#Li-Onsite EMR USA Metal Recycling provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.*E-Verify is a registered trademark of the U.S. Department of Homeland Security. This business uses E-Verify in its hiring practices to achieve lawful workforce. Other details Job FamilyUS AdministrationPay TypeHourly

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:Seeking a reliable Automotive Technician to join our outstanding fleet maintenance team. The Automotive Technician will be responsible formaintaining a diverse range of equipment, including delivery vehicles, heavy-duty on-road tractors, and trailers from various manufacturers. These vehicles' propulsion systems include diesel, gasoline, and alternative technologies such as compressed natural gas, liquefied natural gas, propane, hybrid, and electrical in some locations.Automotive Technicians must be skilled in troubleshooting and maintaining various systems, including hydraulic brakes, air brakes, electrical systems, and engine controls.Responsibilities and DutiesBends, stoops, squats, kneels, crouches, crawls, climbs ladders and stairs, stands, walks, and turns/pivots frequently throughout duration of workdaySits infrequently, as required,?throughout duration of workdayExercises simple hand grasping, power hand grasping, fine hand manipulation, and reaching from foot level to above shoulder level as necessary to complete assigned tasksOperates standard and manual transmissionOperates power and pneumatic toolsRequirementsMust have an active driver’s license issued by the stateMeets D.O.T requirements required by job assignmentMust be willing to work 2nd?or 3rd?shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location’s need.??Must possess the required hand tools required to perform the applicable job assignment. ?Knowledge and SkillsCurrent documented automotive mechanical experienceExperience using diagnostic equipment, scan tools and personal computerPossesses full complement of personal hand toolsClass A/B or A Commercial Driver's License (CDL) - REQUIREDDependable with ability to report to work on a regular and timely basis and complete scheduled workday on a consistent basisAvailable to work varying shifts, additional hours and/or overtime depending on service needsWears personal protective equipment as requiredWorks in an environment with variable temperatures and humidity (climatic conditions), exposure to cleaning materials, petroleum products, dust, dirt, and noise, outside inclement weather, etc.Works cooperatively in a diverse work environmentCommunicates effectively?through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditionsOur compensation reflects the cost of labor across several US geographic markets. The starting pay for this position is $30.71 per hour. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions.Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase program.Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

" POSITION OVERVIEW:Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1 ext. 2862 or by sending an email to . Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products "