We are looking for Flaggers to join our team!
Unload and load supplies and equipment for company and vendor trucks, perform flagging out on roads and railroad crossings, keep shop and yard organized, assist with pickups and deliveries.
Job Duties: Lifts, carries, loads and unloads various construction items including line painting supplies, signs, tools, steel, aluminum, wood and hardware, etc. Prepares, cleans and sweeps work areas and maintain a neat, orderly, work environment. Make sure trucks are loaded with proper equipment for set tasks. Works out in the field performing flagging duties for traffic control. Organizing inventory and shelves Ensure yard is organized and kept clean. Assist with product inventory Ensure all safety rules and procedures are adhered to at all times. Perform other work related duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off Company paid GED program HSA 2nd Chance Employer Don’t have a Highschool diploma, no problem! RoadSafe will pay for you to get your Highschool Diploma too! $125 Red Wing Boot Voucher! Nationwide Company = Nationwide Growth Potential for YOU! Opportunity to grow in a new industry! Ask about our unlimited bonus through our Employee Referral Program!
Requirements: Drivers License - Required - Let the Recruiter know if you have a CDL license and you may be eligble for a different role as well. Must be able to speak and read English. Ability to understand and follow directions as given Ability to lift and carry up to 50 pounds. Must be able to pass a background check, drug test. Ability to work flexible hours.
We are an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.

RoadSafe is looking for a Flagger 2 to join our team!
Work with the Traffic Control Department at work sites to direct motorists by flagging them away from worker activities, moving equipment, oncoming traffic and perform duties listed below:
Set-up signs, cones, etc. around work areas to divert traffic Follow all safety rules and regulations and wear proper safety equipment (work boots – 6 inch with safety toe, hard hat and safety vest) Without Supervision must be able to set up and perform flagger position at job site based on site plan and or contractor directions Adhere to all Company Policies and Procedures Generally works under the Supervision of Project Manager, TCT, TCS, or maybe assigned to work independently Complete daily paperwork accurately and timely Operate 2 way radio Work well in a team environment Provide highest level of customer service to all customers Excellent attendance required, dependable transportation, good work ethic All other duties as assigned
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off Company paid GED program HSA 2nd Chance Employer
Qualifications: Pass a drug test Driver’s license required Pass Background Check Pass Motor Vehicle Records Check Reliable Transportation Must be able to speak and read English. Hold a current Flagger certification or the ability to pass Company sponsored Flagger Certification Ability to lead a small crew Successfully pass Company sponsored Defensive Driver training Pass a Department of Transportation Physical
Work Environment / Physical Requirements: Regularly exposed to outside weather conditions; moving equipment and machinery parts; moving traffic, and fumes and airborne particles Noise level of the work environment is usually moderate/loud Regularly required to stand/walk; reach with hands and arms; for up to 14 hours a day Occasionally lift and/or move more than 50 pounds
We are an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.

Business Unit Description: Michael Foods, Inc. is a leader in the food processing and distribution industry with business in egg products, refrigerated grocery and potato products. We offer exciting job possibilities throughout our organization where you can enhance your career, sharpen your talents and make an impact. Join our company and be part of an innovative team that’s First in Food. Location Description: Michael Foods, Inc. located in the Village of West Jefferson, OH, is located just minutes from the western suburbs of Columbus and about 20 minutes to the west of downtown. We are proud to be Michael Foods’ most recent greenfield project, producing high quality protein shakes serving people all around the world. It’s our honor to continue our strong commitment to our employees, our community, and our environment. Responsibilities: SUMMARY: (NIGHT SHIFT POSITION. 6a-6:30p 2-2-3 SCHEDULE)This position has the responsibility to comply with safety work rules at all times as well as an obligation to reinforce safety as a core value. Ensures that all policies, procedures and activities, related to food safety & quality, are followed and complied with uniformly, in an effort to reduce product and process variability.The mechanic position is responsible for ensuring the equipment productivity and efficiency through troubleshooting, preventive maintenance, and monitoring.#FirstinpeopleACITIVITIES: Assumes personal responsibility to insure a safe and healthy workplace for everyone. Adheres to all safety policies/procedures and incorporates safety and health in all job’s duties/tasks. Adheres to safe work practices, follows GMP’s, maintains sanitary conditions and ensures that product quality is maintained. Reports any conditions or practices that may adversely affect employee safety or food safety/quality to management immediately. Attends and actively participates in safety meetings/trainings.Ensures regulatory compliance at all times.Complete preventative maintenance requirements on all equipment.Monitor efficiency of all equipment and troubleshoot when necessary.Remove or replace defective parts by dismantling and reassembling equipment.Adjust all necessary components of equipment as needed.Repair and adjust all doors as needed.Must adhere to budget, USDA, OSHA, SQF, and FDA compliance guidelines.Perform other duties as assigned. Qualifications: EDUCATION: High school diploma or general education degree (GED) or equivalent.LANGUAGE SKILLS: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations.MATHEMATICAL SKILLS:Ability to add and subtract two-digit numbers and to multiply and divide with 10’s and 100’s. Ability to perform these operations using units of American money and weight measurement, volume and distance.REASONING ABILITY:Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.LICENSES, CERTIFICATES, REGISTRATIONS:Examples of licenses, certificates, and registrations required:Power Industrial Truck Operator’s LicenseBlack Seal License is a plus.OTHER SKILLS AND ABILITIES:Specific skills and abilities required that are not included in other sections:Ability to function in a teamwork environment.Must be well-organized.Must be detail oriented.Ability to plan and prioritize activity.Ability to comply with all safety rules and regulations.Basic computer skills.Ability to work safely with chemicals

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationHigh school diploma, GED with 15 college credits, or GED Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Paid Time Off · Health Benefits Day One · 401K Match · No Travel At Bath & Body Works, everyone belongs. We are committed to creating a diverse, equitable and inclusive culture focused on delivering exceptional fragrances and experiences to our customers. We focus on recruiting, retaining, and advancing diverse talent where our associate population is as diverse as the communities we serve, live and work. In addition, we work to improve our communities and our planet in a way that will make us proud for years to come because we believe the world is a brighter, happier place when everyone has access to the things that make them happy.Summary The Senior Maintenance Technician is a highly proficient experienced-level Technician capable of performing a wide variety of work to ensure that the facilities and equipment are maintained in a safe and effective working condition. Responsibilities Responsibilities include, but are not limited to, modification and repair activities in assigned maintenance operations areas which may include buildings, material handling, offices, lighting, electrical systems and plumbing in any of the distribution centers; and performs related work as required.Qualifications & Experience 5+ years of proven verifiable assignment-related maintenance experience, or an equivalent combination of education and experience sufficient to successfully perform the essential duties of the job as listed above.Minimum of 5 year maintenance experience with forklifts, conveyors, controls, hydraulics, pneumatics and building maintenance.Experience with maintenance in a distribution center settingPossession of a valid driver’s license and a satisfactory driving record.Electrical experience with high and low voltage, AC and DC.Technical school or training desired.Computer skills navigating email/Microsoft Suite. Education Possession of a high school diploma or general equivalency diploma (GED) Core Competencies Lead with Curiosity & HumilityBuild High-Performing Teams for Today & TomorrowInfluence & Inspire with Vision & PurposeObserve, Engage & ConnectStrive to Achieve Operational ExcellenceDeliver Business ResultsBenefits We invite you to join Gingham Nation, where we invest in our associates through competitive compensation, benefits, and development opportunities, so they can continue to be their best at work, at home, and in their communities. Benefits offered to our eligible associates include a no cost mental health and well-being program, health coverage with a variety of plans to choose from, flexible and affordable saving programs, paid time off and a merchandise discount. Visit bbwbenefits.com for details. View Benefits Information The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required. We are an equal opportunity and affirmative action employer.We do not make employment decisions based on an individual’s race, color, religion, gender, gender identity, national origin, citizenship, age, disability, sexual orientation, marital status, pregnancy, genetic information, protected veteran status or any other legally protected status, and we comply with all laws concerning nondiscriminatory employment practices. We are committed to providing reasonable accommodations for associates and job applicants with disabilities. Our management team is dedicated to ensuring fulfillment of this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, associate activities and general treatment during employment. We only hire individuals authorized for employment in the United States. Application window will close when all role(s) are filled.

What You'll Do:As an Vehicle Service Specialist (aka auto technician), you will help keep our guests safe on the road by providing top-tier customer service while performing preventative maintenance services for their vehicles. Through our award-winning training program, you will learn to change oil, check and refill fluids, rotate tires, test and replace batteries, inspect and replace lights and wipers, perform an 18-point safety check, and more. You'll work as a team to provide fast, easy, trusted services to our guests, and have fun doing it!At VIOC, "It all starts with our people." Creating a diverse and welcoming workplace with team members from varied backgrounds and experiences is our highest priority. People of color, women, LGBTQIA+, veterans, and persons with disabilities are strongly encouraged to apply.The perks and benefits we'll provide you*:Competitive weekly pay - $15.75/HourPaid on-the-job training - No previous automotive experience is requiredNo late evenings or holidaysPaid time off (PTO), and holiday payTuition and certification assistance and access to a FREE online universityMedical and prescription drug coverage - with Health Savings Account contributionsDental, vision, and 401(k) savings plans - 100% match up to 5% We promote from within - a commitment we are passionate aboutBack-up Child and Elder CareCompany provided uniforms and tools50% discount on Valvoline Instant Oil Change automotive services What you'll need to succeed: Flexibility to work weekendsAn eagerness to learn, a friendly attitude, and a desire to be part of a customer-focused teamAbility to stand for up to 8 hours, climb stairs, and occasionally lift up to 50 poundsMobility to crouch, bend, twist, and work with your hands above your headComfortable working in a non-climate-controlled environmentEnglish fluency in reading, writing, and speakingHow you'll advance in your career:At Valvoline Instant Oil Change (VIOC), your roadmap to career advancement is limitless! Click here to learn more and to hear from some of our 'Vamily' members. With an award-winning training program, commitment to safety, and fair and honest values, we're here to help you reach every milestone.*Terms and conditions apply, and benefits may differ depending on locationValvoline is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.The Company endeavors to make its recruitment process accessible to any and all users. Reasonable accommodations will be provided, upon request, to applicants with disabilities in order to facilitate equal opportunity throughout the recruitment and selection process. Please contact Human Resources at 1.833.VVV.Report or email make a request for reasonable accommodation during any aspect of the recruitment and selection process. The contact information is for accommodation requests only; do not use this contact information to inquire about the status of applications.

Build an Aviation Career You're Proud OfWe're committed to the quality of work we do at every level. You'll achieve more with us through our training, high standards, and focus on preparation. Help us set the bar high across our entire organization so we can keep making an impact on the aviation world.Help us set the bar high across our entire organization so we can keep exceeding customer expectations. You'll play a vital role in ensuring the reliability of aviation repair and maintenance through training and preparation.What you'll do: Plans, develops, writes, revises, documents, tests, implements and controls programs for computer numerically controlled (CNC) machines and related fixturing.Prepares machine/process setup and operating instructions.Designs and/or manufactures jigs and fixtures from sketches, requirement descriptions or drawings.Provides support, training and problem resolution to operations personnel who use computer numerically controlled machines.Liaises with engineering regarding component repairs, inspection and induction of new repairs.Monitors performance, conducts feasibility studies and implements process improvements for computer numerically controlled machines.Prepares technical specifications and cost benefit analysis for procurement of capital equipment. Liaises with management in the procurement process.Responsible for observing all applicable safety requirements and reporting immediately any unsafe practices/conditions.Carries out special projects as assigned.Position RequirementsThe person requires an ability to understand, utilize, and communicate specialized information in speech and written text. This specialized training is often formalized and recognized by a specific certificate, diploma, or license.Thorough understanding of repair design and development engineering manufacturing process, tool design, and fabrication methods and processes.Strong organizational, analytical, and oral and written communication skills.Thorough knowledge of computer aided design and manufacturing (CAD/CAM) systems. Master-CAM a plus.Ability to read, understand, and interpret blueprints.Familiarity with Fanuc and Haas controls and the ability to program at the machine, as needed.Prior experience as a machinist or toolmaker is preferred.High School Diploma or equivalentMinimum 3 to 5 years relevant experience.Experience with Microsoft Office is a plus.College diploma in manufacturing technology or a related discipline; or equivalent is a plus.Must be a US Citizen or a US Permanent Resident per ITAR regulations.Benefits that make life better:Comprehensive Healthcare401(k) with 100% company match; up to 5% vestedPaid Time Off starting on day oneBonus opportunitiesHealth- & Dependent Care Flexible Spending AccountsShort- & Long-Term DisabilityLife & AD&D InsuranceLearning & Training opportunitiesRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardStandardAero offers equal employment opportunities for all. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero

Schneider Electric has an opportunity for a HVAC Building Automation Technician in either West Chester, Columbus or Dayton, OH areas.Schneider Electriccreates connected technologies that reshape industries, transform cities and enrich lives. Our 135,000+employees thrive in more than 100 countries. From the simplest of switches to complex operational systems, our technology, software and services improve the way our customers manage and automate their operations. Help us deliver solutions that ensure Life Is On everywhere, for everyone and at every moment.http://www.youtube.com/watch v=YtExntUe89cGreat people make Schneider Electric a great company.What do you get to do in this position Services and maintains complex HVAC Building Automation SystemsDiagnoses and repairs complex control systems malfunctions requiring extensive knowledge of a variety of electronic or digital controls systems and ability to test and write modifications in multiple languages of systems software.Electrical troubleshooting knowledgeProvides sketches of field changes and discrepancies for engineering corrections and drawingsCommunicates with customer upon arrival and before leaving the work site.Meets regularly with customer to become familiar with operating problems.Keeps customer informed on the nature of service provided, outstanding issues and recommends system enhancements, upgrades, and or replacement.Acts as a technical resource to team and customer as needed.Provides start-up and checkout documentation to the installation team for use in commissioning and validationWorking knowledge of MS Office, File Structure, VISIO.Knowledge of basic BACNET/LON/MODBUS protocols. Must be highly organized and possess the ability to work in a high paced environment with the ability to prioritize tasks to meet the schedules given by the leadershipDemonstrate the ability to operate independently and autonomously and take ownership of all tasks. Excellent oral and written communication skills and team orientedQualifications:3+ years of field experience in the HVAC controls industry; preferably with troubleshooting, maintenance, and service Technical, hands-on experience with commissioning and programming of DDC controls. Knowledge of HVAC systems and equipment. The ability to communicate technical material to a nontechnical audience Proficiency with writing code for controller sequence of operations Proficiency with integration protocols (BACnet, Lon works, Modbus, etc.) .Requirements:Two-year (2) degree in a related technical field required or related work experienceExperience in HVAC building Automation a must!Proficiency with Microsoft Office products (Word, Excel, PowerPoint, Visio) and general windows environment Excellent customer service skillsExcellent verbal and written skillsCustomer-focused, results-oriented professional, and strong team player. Self-starter that demonstrates initiative. Ability to manage multiple priorities and stay organized.#L1-KJ1 Schneider Electric offers a robust benefits package to support our employees such as flexible work arrangements, paid family leave, 401(k)+ match, and more. Click here to find out more about working with us: http://se.com/us/careers. We seek out and reward people for putting the customer first, being disruptive to the status quo, embracing different perspectives, continuously learning, and acting like owners. We’re recognized around the world for welcoming people as they are. We create an inclusive culture where all forms of diversity are seen as a real value for the company. See what our people have to say about working for Schneider Electric. Why us Schneider Electric is leading the digital transformation of energy management and automation. Our technologies enable the world to use energy in a safe, efficient and sustainable manner. We strive to promote a global economy that is both ecologically viable and highly productive.25.7bn global revenue137 000+ employees in 100+ countries45% of revenue from IoT5% of revenue devoted for R&DYou must submit an online application to be considered for any position with us. This position will be posted until filledIt is the policy of Schneider Electricto provide equal employment and advancement opportunities in the areas of recruiting, hiring, training, transferring, and promoting all qualified individuals regardless of race, religion, color, gender, disability, national origin, ancestry, age, military status, sexual orientation, marital status, or any other legally protected characteristic or conduct. Concerning agencies: Schneider Electric does not accept unsolicited resumes and will not be responsible for fees related to such.

Job Description Job Title:Automotive Technician / MechanicLocation: 8555 Sancus Blvd, Columbus, OH 43240Job Overview:This brand-new state-of-the-art facility is scheduled to open in September 2024. Interviews will begin in August 2024.We are looking for technicians / mechanics who are energetic, upbeat, and have a positive attitude. The technicians we are looking for have to seek out solutions to tough problems with a strong passion for doing what’s right for our guest.Responsibilities include, but are not limited to:Technicians use their knowledge & skills to diagnose and fix vehicles for ourguestContinuously build experience as an automotive mechanic across a wide range of domestic and foreign vehiclesComplete full, accurate, and honest courtesy vehicle inspectionsWork as part of a team to troubleshoot guest concerns quickly and effectivelyFollow and promote our high standards of safety, cleanliness, and organizationWork closely with the service department and effectively communicate guest concernsWork together with other Technicians to solve problems, meet deadlines, and deliver distinguished results Qualifications Qualifications:Positive attitude and a desire to serve customers3+ years of experience as an automotive technician/mechanicASE Certifications preferred, or a plan to achieveCapable of diagnosing and repairing all makes/models of vehiclesMeet or exceed hourly goalsAptitude for learning additional skills and processesProfessional appearance and strong communicationA desire for long-term career developmentPhysical Requirements:Occasionally lift and/or move over 100 poundsBe able to work with tools on vehicles lifted above their headWork in tight spaces as dictated by the vehicle’s needed repairHave the needed dexterity in order to efficiently use hand toolsWalk/stand for the majority of their workdayDrive manual transmissions vehiclesEfficiently navigate a computer Additional Information Christian Brothers Automotive (CBA) began in 1982 with the simple premise of providing precision auto repair with transparency, integrity and a philosophy of people first. All 300+ CBA locations offer a modern facility equipped with manufacture-level diagnostic equipment and the latest factory scan tools. CBA shops also offer their technicians a consistent workload, free training, full-time live technician support and access to our private Technician Assistance Center.All of your information will be kept confidential according to EEO guidelines. Christian Brothers Automotive is an Equal Opportunity Employer. Christian Brothers Automotive locations practice "At-will" employment practices.

Req ID:436994Address: 6023 Alum Creek Drive Obetz, OH, 43137Benefits: * Paid Time Off * Flexible Scheduling * 401(k) – 100% match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Welcome to Love’s!Diesel Technicians work in a fast-paced environment and maintain clean places with friendly faces. You will interact with customers & drivers from all over, making their travels and their day better. Job Functions: Troubleshoot and repair light mechanical issues that may include wheel-end assemblies, electrical systems, suspensions, A/C, or engine componentsAssist customers with roadside servicesProvide preventative maintenance servicesAbility to move, lift 75+ pounds working in close quarters. Ability to work in various temperatures.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Work a rotating schedule that alternates between day and night as needed.Ability to obtain a medical card through the Department of Transportation. (paid by Love’s) Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

Shift - Tuesday to Friday, 10-hour shift, 2 PM to 12:30 AM, OT as neededWhat this job involves – The HVAC Mechanic will perform HVAC and mechanical preventive maintenance and repairs primarily on controlled temperature units. This will include hands-on work to complete the necessary work within Jones Lang LaSalle standards and guidelines.What is your day to day Performs troubleshooting, service, and maintenance on Controlled Temperature Units (CTU), HVAC systems including but not limited to controls, air handlers, BMS, BAS, actuators, pumps, valves, dampers, and motors.Operate and maintain the following systems: heating hot water & steam, ventilation equip., air conditioning, water conditioning – treatment and refrigeration skids for cool rooms.Operate & maintain ancillary systems such as cooling towers, pumps, chillers, etc.Install trouble-shoot maintain & repair air conditioning and refrigeration equipment related piping within the unit and controls. Experience in pneumatic and DDC controls, wiring methods, and instrumentation is requiredWork from CAD drawings, prints, schematics, sketches, or verbal instructionsAdapt and install specialized cooling and or heating devices for specific requirements.Experience with water treatment methods, and procedures for cooling and hot water circulation systems including testing of basic parameter, troubleshooting system problems, and repairing of equipment as needed.Performs installation and replacement of relevant HVAC system components.Performs work on a variety of non-HVAC building systems including FLS, doors, plumbing, and electrical as needed.Maintains good tenant relations through prompt and courteous response to tenant requests within the guidelines set forth by JLL.Requires the ability to analyze the operation of various systems, determine the cause of any problems/malfunctions and take corrective action as required.Contributes and own areas of refrigeration management.Perform work outside of the trade to include other duties as assigned by management including but not limited to painting, light bulb replacement, installation of pipe, plumbing and other maintenance related tasks.Required:Electronic and pneumatic controls and diagrams.1+ years of experience working as a refrigeration & air conditioning mechanic in an industrial or research environment.1+ years experienced in refrigeration and HVAC practices.Preferred:Experience working in a GMP environment2-3 years’ validated CMMS experienceEPA 608 UniversalKnowledge of BAS (Building Automation System) or QBAS (Qualified Building Automation System)Work Environment:Working inside of automated manufacturing distribution center#HVACjobs

Our client is seeking a Commercial HVACR Technician to join their team. As a Commercial HVAC/R Technician, you will be responsible for inspecting and maintaining all HVAC, refrigeration, mechanical, and electrical equipment and systems in assigned facilities.The ideal candidate will have teamwork, communication, and problem-solving skills which will align successfully in the organization.Commercial HVACR TechnicianLocation: Columbus, OH Pay Rate: $32-36/hr. (negotiable)Key Responsibilities Operates, inspects, and maintains all HVACR, mechanical, electrical, and plumbing equipment and systems in assigned facilities to obtain the most efficient operating results and life expectancy, especially with rack refrigeration.Performs inspections and repairs to assigned property interior and exterior areas, including walls and flooring, installed fixtures, roofing systems, lighting, etc. Requirements Minimum of four (4) years of technical experience in all aspects of building engineering with a strong background in the technical aspects of HVAC/R, plumbing, electrical, production equipment repair and maintenance.EPA Universal CertificationValid Driver's License. SKILLED (at least 2): Refrigeration, Coolers, Freezers, Chillers, Walk-In, Walking coolers, Rack Refrigeration, Ice Machines, HVAC, Rooftop units. Benefits Medical, Dental, & Vision with HSA and FSA plans.Retirement plans including a 401K match.Supplemental Life Insurance & Disability Plans.Holiday Pay.Upskilling, Training and Education Programs.Pet Insurance If this is a role that interests you and you’d like to learn more, click apply now and a recruiter will be in touch with you to discuss this great opportunity. We look forward to speaking with you!About ManpowerGroup, Parent Company of ExperisManpowerGroup® (NYSE: MAN), the leading global workforce solutions company, helps organizations transform in a fast-changing world of work by sourcing, assessing, developing, and managing the talent that enables them to win. We develop innovative solutions for hundreds of thousands of organizations every year, providing them with skilled talent while finding meaningful, sustainable employment for millions of people across a wide range of industries and skills. Our expert family of brands – Manpower, Experis, Talent Solutions, and Jefferson Wells – creates substantial value for candidates and clients across more than 75 countries and territories and has done so for over 70 years. We are recognized consistently for our diversity - as a best place to work for Women, Inclusion, Equality and Disability and in 2022 ManpowerGroup was named one of the World's Most Ethical Companies for the 13th year - all confirming our position as the brand of choice for in-demand talent.

Build your best future with the Johnson Controls teamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What we offer:Competitive salaryand bonus planPaid vacation/holidays/sick timeComprehensive benefits package including 401K, medical, dental, and vision careOn the job/cross training opportunitiesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyThis position will not offer visa sponsorship now or in the future. What you will do:Under general direction, responsible for the design, configuration, and operation of complete building control systems including fire, security, and other low voltage control sub-systems (i.e., lighting, nurse call, data networks, etc.) to meet the intent of the project requirements. Accountable to field teams for quality, timeliness and efficiency of designs. Develops complex software programs, commissioning and troubleshooting to ensure proper operations of the building control system. Provides detailed information and submittals to communicate design and operation to customers, consultants, Johnson Controls field installation team and subcontractors.How you will do it:Designs and configures technically complex building control systems as defined by the contract documents. Creates flow diagrams, sequence of operations, bill of material, network layouts and electrical schematics as required.Develops and tests software programs necessary to operate the system per the intent of the project requirements.Coordinates and creates necessary drawings and equipment schedules for submittals and installation.Selects, orders, and tracks the delivery of materials for assigned projects. Coordinates factory-mounting processes to meet factory and project schedule.Assists in the loading and commissioning of all system and network-level controllers as required. Assists in validation of complete system functionality and troubleshoots problems with subcontractors and other trades to ensure proper operation.Provides field change information to the project team for the creation of as-built drawings and software.Keeps management and JCI contractor or customer informed of job progress and issues.Assists in performing site-specific training for owner / operator on the total building control system.Participates in release meeting with project field team. Performs value engineering to provide cost effective results while maintaining customer satisfaction.May provide work direction to Systems Design Assistants.Adheres to safety standards. High degree of regard to employee and subcontractor safetyWhat we look for:RequiredMinimum of four years of experience with programming, installing and/or commissioning controls systems including system-level controllers. Demonstrated knowledge of the construction, mechanical, electrical, or HVAC service industry.Demonstrated knowledge and understanding of mechanical drawings, electrical wiring diagrams, control theory, automatic temperature controls, building automation systems and other building subsystems.Demonstrated experience in the integration of low voltage building sub-systems using various industry protocols (i.e., Modbus, LON, BacNet, etc.).Ability to relate technical knowledge to a non-technical audience.Demonstrated advanced computer skills required, particularly computer-related drafting tools, such as visio.Preferred Bachelor’s Degree in Engineering with a minimum of four years of experience, or an associate degree in a related technical field with five years of relevant work experience required.Understanding of IP networking for building automation systems.#LI-Hybrid#TechHiringJohnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Company DescriptionPay Rates Starting between: $12.60 - $18.33 / hour Are you passionate about team building, customer service, and meeting new people Pilot Company offers a dynamic environment where no two days are the same. Teammembershave the opportunity to build an inclusiveatmospherewith their co-workers and make a better day for every type of guest – whether it’s the professional driver stopping for a clean shower, the commuter grabbing their morning coffee, or the vacationerneeding their go-to snack along their journey. We embrace and celebrate our diverseguests and team members,whofuel creativity, innovation, and positivity. We strive to make every stop on your career journey and ourguests’ journey a great one!Also, there are a number of opportunities to work in other roles within our travel centers and restaurants so while we may be hiring for a specific role, we always look to train and offer experience for other roles we have.We hope your next career stop is with us! Join our team and start your journey with Pilot Flying J.BENEFITSWeekly Pay15 cent fuel discountFree daily meals$10 low-cost health plans (for full-time team members)Paid time offFamily leaveAll qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status or any other characteristic protected under applicable federal, state, or local law.Military encouraged to apply.Job DescriptionMaintaining overall cleanliness of the storeCleaning showers and restroom facilitiesWashing, loading, and unloading towels for showersPerforming general repair/ maintenance of the storePicking up and taking all trash around travel centerProvide excellent guest service through well-maintained facilitiesQualificationsRequired QualificationsHighly motivated self-startersAbility to work as part of a teamAble to lift 50 pounds and walk/stand most of the dayAbility to work a flexible schedule of nights, days, weekends, and holidays Preferred QualificationsExperience in a similar positionKnowledge of industrial equipment and ability to fix small problemsAdditional InformationWellness ProgramReward and Recognition ProgramProfessional development401(k) retirement savings planPaid parental leaveAdoption AssistanceFlexible ScheduleFull and Part Time positions available

Hepaco, a Clean Harbors company, in Columbus, OH is seeking a Field Services Technician I to join our safety conscious team. This role will be active in the field responsible for the performance of tasks associated with hazardous waste clean-up, site-remediation, equipment decontamination and handling of hazardous materials. Hepaco, a Clean Harbors company, is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Why work for Hepaco, a Clean Harbors company Health and Safety is our #1 priori ty and we live it 3-6-5!Focus on maintaining sustainability and cleaning the EarthComprehensive health benefits coverage after 30 days of full-time employment including 401K with Company matchOpportunities for growth and development for all the stages of your careerCompany paid training and tuition reimbursementEnsure Health and Safety is the number one goal by following policies, processes, and always acting in a safe mannerEngage in strenuous physical labor including lifting and pulling heavy objectsOperate light and heavy equipment, handles various hand tools and powered industrial tools, works with vibration-producing toolsWear and properly use a variety of personal protective Equipment (PPE). Including respirators, skin, face, hand and foot protection in a multiple number of combinationsWork in various temperatures indoors and outdoors in all weather conditionsWork in atmospheres and locations with the potential for exposure to various chemical and physical agents, some of which may be hazardous, toxic, or corrosiveWork in potentially elevated noise levels, confined spaces, including lifting in areas of low clearanceWork at elevations including working from ladders and scaffoldingAssist in field sampling activities and calibration of metersClimb ladders, scaffolding and into and out of trucks, tanks, and various other containersWork extended (> 8 hrs.) time periodsAttend all compliance and safety update meetingsInspect drums for container integrity and regulatory complianceSafe loading and unloading of hazardous and non-hazardous wasteConduct waste stream sampling and profiling as necessaryFollow all local, state (provincial) and federal compliance regulations and rulesSafely operate vehicles in accordance with U.S. DOT, local, state (provincial) and federal requirementsSafely observe all corporate operating guidelines and proceduresObserve all company environmental health and safety operating guidelinesPerform other duties as assignedBy position, ability to be on call for emergency response on rotating basis every other weekBy position, site-remediation, equipment decontamination, and the handling of hazardous materialsReliable transportationAbility to perform physical functions per Key ResponsibilitiesThis position includes emergency response, a continuing condition of employment is agreeing to be on-call; on occasion working on weekends and holidays will be required; emergency response situations can extend beyond 8 hours, up to 12-24 hrs.Perform physical functions per job requirementsSuccessfully complete a background check, drug test, and physical, by positionPer OSHA's Respiratory Protection standard, 29 CFR 1910.34, employees in positions requiring respirators are required to meet facial hair standards. Preferred Qualifications: Valid Driver’s licensePrevious relevant labor experience Hepaco, a Clean Harbors company, is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or based on any other federal, state/provincial or local protected class. Hepaco, a Clean Harbors company, is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact or 1-. Hepaco, a Clean Harbors company, is a Military & Veteran friendly company. #HEP *HEP

$23.00/hourShift Premium may ApplyImmediately hiring! We're looking for responsible, detailed people who are ready to accelerate their automotive repair career! Whether you have worked in an auto garage or car dealership, this job is for you! Join our team of driven professionals at Avis Budget Group enterprise. What You'll Do: As an automotive technician, you will be responsible for conducting essential repairs on a diverse range of vehicle brands and models, requiring minimal technical oversight. Your tasks will encompass various maintenance activities such as oil changes, lubrication, tire repairs, and potentially warranty repairs based on your proficiency level. In addition, you may support our skilled mechanics in handling intricate repair procedures. Perks You'll Get: Bi-weekly hourly wage (New York and Puerto Rico: weekly wage) On-the-job training to expand your automotive abilities and help to obtain ASE Certificates Paid time off Medical, dental and other insurance Flexible spending account opportunity to contribute up to $270 as a tax-free benefit for public transportation or parking expenses Retirement benefits (401k) Employee discounts, including discounted car rental and discounted prices on the purchase of Avis/Budget cars * Above perks may vary based on full-time/part-time status and location What We're Looking For: Valid Driver's License and good driving record At least 2 years of auto repair experience or coursework with automotive certifications 1 ASE certification (ability to acquire 2 additional ASE certifications within first year) Knowledgeable in areas covered by the ASE certification programs, including, but not limited to, Engine Repair, Drive Train/Axles, Suspension/Steering, Brakes, Electrical, Heating/Air Conditioning, Engine Performance and Light Vehicle/Diesel Comfortable working in a mechanical shop with moderate or loud noise levels Must have a complete set of tools required for auto repair and maintenance Basic computer skills including typing, data entry Must be able to lift up to 50 pounds, continuously stand, bend, reach, walk, sit and kneel frequently, enter, exit and drive vehicles Must be 18 years of age and legally authorized to work in the United States Previous Original Equipment Manufacturer (OEM) experience preferred, providing an added advantage! Who We Are Here at Avis Budget Group, you will be joining a team of 25,000 driven people, performing with purpose. Together, we're moving the future of transportation forward with our innovative, customer-focused solutions. Our culture is performance driven, where we encourage and support each other to be at our best through leadership, training, tools, and rewards. We are proud to make a positive difference to the lives of our colleagues, customers, and communities where we operate. Avis Budget Group is an Equal Opportunity Employer - Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other category protected by applicable law. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. This position may be with any affiliate of Avis Budget Group. ColumbusOhioUnited States of America

AWS Infrastructure Services owns the design, planning, delivery, and operation of all AWS global infrastructure. In other words, we’re the people who keep the cloud running. We support all AWS data centers and all of the servers, storage, networking, power, and cooling equipment that ensure our customers have continual access to the innovation they rely on. We work on the most challenging problems, with thousands of variables impacting the supply chain and we’re looking for talented people who want to help. You’ll join a diverse team of software, hardware, and network engineers, supply chain specialists, security experts, operations managers, and other vital roles. You’ll collaborate with people across AWS to help us deliver the highest standards for safety and security while providing seemingly infinite capacity at the lowest possible cost for our customers. And you’ll experience an inclusive culture that welcomes bold ideas and empowers you to own them to completion. The Generation Service Technician has safety, customer satisfaction, and business responsibilities within data center operations. The person in this role is responsible for identifying, troubleshooting, diagnosing and providing quality repairs of electrical generator systems and related engine mechanical failures. The Generator Service Technician is both the technical expert and primary customer support contact to the customer, and is therefore responsible for continually communicating with the customer to provide an exceptional customer experience and drive data center up-time and availability. Key job responsibilities- Know and follow all Company safety rules, including maintaining a safe, clean, and orderly work area, and fully participate in company accident prevention and safety improvement activities- Respond to customer requests - Travel to designated sites and perform professional quality field service repairs consistent with company standards- Advise the Generator Service Manager of parts needed for necessary repairs- Keep Generator Service Manager continually apprised, and utilize leadership to assist in answering customer questions and problems when necessary- Document detailed, complete and legible descriptions of all repair operations performed- Accurately record time, expenses, and mileage- Travel 80-90% of the time in an assigned region, and/or work overtime, weekends, or holidays, sometimes on short notice- Lift up to 50 lbs frequently; pushing and pulling a maximum force of 50 lbs- Wear Personal Protective Equipment (PPE) Protective Glasses, Protective Gloves, and Protective Footwear as requiredAbout the teamAmazon Web Services (AWS) is the world’s most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating that’s why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses. Amazon values diverse experiences. Even if you do not meet all of the preferred qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn’t followed a traditional path, or includes alternative experiences, don’t let it stop you from applying. We value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why we strive for flexibility as part of our working culture. When we feel supported in the workplace and at home, there’s nothing we can’t achieve in the cloud. Here at AWS, it’s in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon (gender diversity) conferences, inspire us to never stop embracing our uniqueness. We’re continuously raising our performance bar as we strive to become Earth’s Best Employer. That’s why you’ll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional. BASIC QUALIFICATIONS- High School Diploma or equivalent - 5+ years of hands-on working on electrical generator systems- 1+ years of experience troubleshooting and repair of equipment using standard safety proceduresPREFERRED QUALIFICATIONS- 2-year technical training program completion, or completion of a 3 year apprenticeship- Fully trained on Cummins, MTU, and Caterpillar products- Knowledge of engines, generators and load transfer equipment- Technical knowledge of electrical generator systems and related engine mechanical failures- Meets/exceeds Amazon’s leadership principles requirements for this roleAmazon is committed to a diverse and inclusive workplace. Amazon is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. For individuals with disabilities who would like to request an accommodation, please visit https://www.amazon.jobs/en/disability/us.

Critical Facilities Technician 6–11-month contract Hilliard, OH $32.38/HR on Experis W2 Overview: Our high-profile client is seeking a Data Center Technical Operations Engineer for a 6–11-month contract assignment in the Columbus, OH area. As a Data Center Technical Operations Engineer, you will be responsible for Data Center Engineering Operations within the Data Center including risk management and mitigation, corrective and preventative maintenance of critical infrastructure, vendor management and metric reporting. Responsibilities: Operate and manage both routine and emergency services on a variety of critical systems such as: switchgear, generators, UPS systems, power distribution equipment, chillers, cooling towers, computer room air handlers, building monitoring systems, etc. Emergency response to facility related issues. Visibility of critical electrical and cooling systems needed to perform daily tasks and response. Access to CMMS system to track and complete equipment repairs. Responsible for the on-site management of shift technicians, senior shift technicians, sub-contractors and vendors, ensuring that all work performed is in accordance with established practices and procedures. Establish performance benchmarks, conduct analyses, and prepare reports on all aspects of the critical facility operations and maintenance. Work with IT managers and other business leaders to coordinate projects, manage capacity, and optimize plant safety, performance, reliability and efficiency. May assist in the design and build out of new facilities. May assist in projects to increase current facility efficiency. Responsible for asset and inventory management. Assist in recruiting efforts. Deliver quality service and ensure all customer demands are met. Basic Qualifications: Electrical and Mechanical troubleshooting and repair knowledge BS Degree or Technical (Military/Trade School) Degree a plus 0-2 years of Data Center experiencepreferred Computer proficient in MS Office Team Oriented Prefer Bachelor’s Degree or Technical (Military/ Trade School) Degree experience. 0-2 years of relevant work experience. 0-2 years of management experience. Strong verbal and written communication skills. Strong leadership and organizational skills. Strong attention to detail. Ability to prioritize in complex, fast-paced environment. Preferred Qualifications: 0-2 years of Data Center Engineering Experience 0-2 years of Data Center Management Experience Bachelor’s Degree in Electrical Engineering, Mechanical Engineering or relevant discipline. Fundamental knowledge of network design and layout as well as low voltage (copper/ fiber) cabling If this is a role that interests you and you’d like to learn more, click apply now and a recruiter will be in touch with you to discuss this great opportunity. We look forward to speaking with you! About ManpowerGroup, Parent Company of:Manpower, Experis, Talent Solutions, and Jefferson Wells ManpowerGroup® (NYSE: MAN), the leading global workforce solutions company, helps organizations transform in a fast-changing world of work by sourcing, assessing, developing, and managing the talent that enables them to win. We develop innovative solutions for hundreds of thousands of organizations every year, providing them with skilled talent while finding meaningful, sustainable employment for millions of people across a wide range of industries and skills. Our expert family of brands –Manpower, Experis, Talent Solutions, and Jefferson Wells– creates substantial value for candidates and clients across more than 75 countries and territories and has done so for over 70 years. We are recognized consistently for our diversity - as a best place to work for Women, Inclusion, Equality and Disability and in 2022 ManpowerGroup was named one of the World's Most Ethical Companies for the 13th year - all confirming our position as the brand of choice for in-demand talent.

Legal Entity:Honda Dev. and Mfg. of Am.,LLCBusiness Unit:Frame & Interior Development BUDivision:Interior Cabin Development DivWork Location:Auto Development CenterHiring Manager:Allen CossetteShift:1stCareer Level:4Job Grade:Exempt-3Job PurposeAt the Sr. Engineer I Career Level, you are an expert in related technical areas and expected to oversee assigned development, testing, and / or research activities, while developing others from a technical, project, and / or team management role.Key AccountabilitiesProject/Team Management –Lead small to medium sized team, communicate the deliverables and plan to achieve them. Coordinate team activities on development/research/testing activities, managing the flow of team members on and off the project as needed. Build the capabilities of the team through coaching and mentoring. Provide technical guidance and oversight on requirement achievement, test results, and countermeasure application. Responsible for function output of project(s)Engineering Solution Design & Specification –Initiate and Lead the design of complex assemblies, the associated drawings, engineering specifications/standards and validation processes as required.Conceive and lead the development of engineering specifications and standards or functions to guide engineering and manufacturing work in the organization and its suppliers.Provide direct technical guidance and final oversight to multiple groups and ensure functional safety standards are met.Gather data and provide feedback and judgement on the feasibility, costs, quality and performance of design concept.Understand and consider in decision-making the connections and impact to different vehicle segments and development activities.Correlate with cross-divisional or cross-company counterparts when necessary and align with the organizational technology standards, regulations, and policies.Review and provide judgement on technical results and offer recommendations for development to technical staff, including up to Chief Engineer.Build or bring in new technologies and specifications, managing associated risks and addressing issues.Supplier Management – Identify new, select and lead technical negotiations with suppliers. Support PIC’s in supplier interactions and negotiations. Lead communications, set or support direction setting, build new and manage existing relationships; addressing issues as needed.Documentation – Compile and/or develop documentation to meet program deliverables and move development process forward. Review documents prepared by PIC’s for completeness and quality.Integration & Correlation – Integrate areas of responsibility into the vehicle or lead a group in doing so, providing guidance to resources as needed. Interacting and correlating direction at the cross-department and cross-divisional level. Adapting communication style and approach as needed depending on the audience and purpose.Relationship Management – Manage relationships with internal stakeholders andcounterparts, building professional credibility and trust. Manage inter-company issues andcoordinate internal resources. Provide reports on large project status items and deliverables.Personal Development – Be recognized as a subject matter expert in own area of technologyor department function and beyond in the division. Maintain an in-depth understanding ofcurrent and emerging technologies, regulations and company best practices.Improvement & Innovation – Lead continuous improvement projects and provide relatedtechnical or group management (i.e. in requirement development, process improvement, projectmanagement, associate development, communications). Lead and/or create new technologyinternally or with suppliers. Foresee and recognize potential cascading impacts in thedevelopment process and act to prevent or resolve them in a timely manner.Qualifications, Experience, and SkillsBachelors of Science in Mechanical, Aero, or Automotive Engineering, BS Industrial Design or Equivalent Industry Experience Minimum of six years of experienceSubstantial general work experience together with comprehensive job related experience in own area of expertise to fully competent levelExperience of supervising and directing people and other resources to achieve specific end results within limited timeframesWorkstylePrimary working location is seated at a deskLimited lifting of parts and part dunnage maybe required on occasionLess than 10% travelOT required as necessary to achiever program deliverablesTotal RewardsAt Honda, you will play a key role in our journey to become a company that society wants to exist now, and in the future. Your endless curiosity will drive innovation and your courageous spirit will challenge the status quo. We believe having a workforce made up of diverse thinkers and innovators makes us a better Honda. Respect for each other and respect for diversity each and every day drives our associates to contribute at the highest level and work effectively in a team environment. We make the dream of mobility a reality with our innovative and high-quality products. Together, we Bring the Future to our customers, associates, and communities. We are Honda!What differentiates Honda and makes us an employer of choice Total Rewards:Competitive Base Salary: Pay will be based on several variables that include, but not limited to, geographic location, work experience, education, etc.Annual BonusOvertimeIndustry leading Benefit Plans (Medical, Dental, Vision, Rx)Paid time off, including vacation, paid holidays, sick time, personal days401K Plan with company match + additional contributionLifestyle BonusRelocation assistanceCareer Growth:Advancement opportunitiesCareer mobility Education reimbursement for continued learningTraining and Development programsAdditional Offerings:Wellbeing programCommunity service and engagement programsProduct programsFree drinks onsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Job PurposeTo contribute to the development of functioning prototypes that will eventually become production ATV/SxS vehicles, researching and applying new technologies to support business targets and maintaining global vehicle product quality.Key AccountabilitiesDevelop complex component and system layouts for ATV/SxS prototype vehicles using computer-aided design software that achieve concept targets, function requirements, and manufacturing requisites with limited supervision. Communicate specification requirements and manufacturing control points via prototype and production drawings that result in setting the final specifications of global ATV & SxS new models and mass production vehicles. Maintain accurate technical, development, and administrative documentation as required.Establish or contribute to establishing cost targets for responsible parts that contribute to achievement of the vehicle development targets and achieve the cost targets through optimizing difficult part/system designs and offsetting any spec changes after target fix through implementation of additional cost reduction ideas.Create and manage schedule of individual work to ensure deadlines are met, coordinate resource needs with supervisor, and effectively utilize contractor resources with limited supervision. Consistently communicate project status and participate or lead project meetings, discussions, and development events.Generate high-level ideas and contribute to building strategies that support the evolution of new technologies. Support or lead maturation of ideas to prepare for development applications with limited supervision.Support market quality themes with limited supervision. Utilize problem-solving methods to analyse root causes. Develop and implement C/M specs as necessary limited supervision.Qualifications, Experience, and SkillsMinimum Educational Qualifications:Bachelors Engineering Degree in related fieldMinimum Experience:5+ years engineering experience preferably in Powersports or Automotive fieldOther Job-Specific Skills:Strong leadership, coaching and mentoring skillsAbility to interact/communicate effectively with staff/managementMust be able to operate with high level of confidentialityCompetent in FTA, FMEA, dimensional tolerance stack-ups and applicationCompetent analytical, problem solving, judgement, decision-making and prioritizationCompetent drawing and layout skills/techniques, include understanding of CAE principlesCompetent in creating a plan and scheduleCompetent in understand product development schedulesJob DimensionsNo. of Direct Reports: 0No. of Indirect Reports: 0Financial Dimensions: $0Decisions ExpectedPropose spec and drawingsPrioritization of individual workloadBalance of QCD for basic situations in individual area of responsibilityWorking ConditionsTravel: Average of 1-3 times monthly. Amount varies based on project demands/responsibilities, conferences, etc.; includes possible overseas travel.Physical: Primarily works at a desk or scope; frequent keyboarding. Limited kneeling, standing, squatting, reaching or bending.Hazards: Risks found in a typical office & shop setting. May be exposed to explosives/flammables, pressurized equipment, toxic chemicals and moving parts.Overtime: Overtime expected based on project demands/responsibilities.Maintains professional conduct and follows all departmental, safety DEPARTMENT, and COMPANY policies, Procedures, AND rules.What differentiates Honda and make us an employer of choice Total Rewards:• Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)• Paid Overtime• Regional Bonus (when applicable)• Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)• Paid time off, including vacation, holidays, shutdown• Company Paid Short-Term and Long-Term Disability• 401K Plan with company match + additional contribution• Relocation assistance (if eligible)Career Growth:• Advancement Opportunities• Career Mobility • Education Reimbursement for Continued Learning• Training and Development programsAdditional Offerings:• Tuition Assistance & Student Loan Repayment• Lifestyle Account• Childcare Reimbursement Account• Elder Care Support• Wellbeing Program• Community Service and Engagement Programs• Product Programs• Free Drinks OnsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

Operations is at the heart of Amazon’s business. We are known for our speed, accuracy, and exceptional service. Our buildings deliver tens of thousands of products to hundreds of countries worldwide, every day. Reliability Maintenance & Engineering (RME) are the business partners that work tirelessly behind the scenes to make it all happen. We drive continuous improvement, and maintain all of the Material Handling Equipment (MHE) to ensure our customers are met with the Amazon smile. Come join us, on our journey!If you do not meet 100% of the preferred qualifications outlined in this job description, we still encourage you to apply. We understand that skills and competencies can be gained in many ways and we are primarily interested in a demonstrated commitment to the work and the potential to grow. Experience comes in many forms and passion goes a long way. If your experience is close to what we're looking for, please consider applying.About the Role:As a Control Systems Lead, you will lead service technicians on the team with maintaining, troubleshooting, and modifying Material Handling (MHE) controls systems equipment to ensure operational performance. You will support the Operations Maintenance team by designing solutions for difficult problems and managing projects. You will help train, and mentor service technicians and contract technicians.What Do We Offer Amazon offers competitive compensation packages including comprehensive healthcare benefits starting on Day 1, matching 401(k) program, and up to 20 weeks of paid parental leave. But wait, there’s more: we don’t wear suits and ties! Come as you are because jeans, t-shirts, sneakers and sometimes a neon safety vest will be your daily outfit.Key job responsibilitiesResponsibilities include, but are not limited to- Promote a safe working environment by following all safety procedures- Troubleshoot and modify software programs for material handling control systems, including PLC/PC controllers, Allen Bradley Controllogix and Compactlogix PLC platform utilizing RSLogix 5000 software package. Including Industrial networks such as Ethernet, ControlNet, DeviceNet, Profibus, AS-I, motor control systems, servo drives, frequency drives, and electrical distribution systems.- Act as first level escalation support for the control system technician teams. Appropriately escalate downtime situations to vendors or headquarters for support to restore equipment operation.- Apply subject matter expertise in material handling and electronic control systems to maximize building utilization of systems- Monitor MHE metrics and partner with Controls Technicians and Mechanics to resolve equipment electrical problems that create performance deficiencies. Perform controls systems assessments to maintain and improve equipment reliability- Partner with Facility Operations leadership, equipment vendors and parts suppliers to plan and coordinate new technology installations. Acting as the technical consultant for capital projects inside the building- Communicate technical issues and project timelines with building leadership, operations and the maintenance team. Explain production impacts and work closely with operations and engineering to ensure a thorough understanding of impact to systems- Develop training plans for Control Systems Technicians- Move up to 49lbs as well as stand and walk during shifts lasting up to 12 hours, with or without reasonable accommodationBASIC QUALIFICATIONS- 1+ years of Microsoft Office products and applications experience- Associate's degree, or 2+ years of professional or military experience- Work a flexible schedule/shift/work area, including weekends, nights, and/or holidaysPREFERRED QUALIFICATIONS- Bachelor’s degree in Electrical Engineering or related field- 5+ years of experience with Motor Controls (motor starts, variable frequency drives, DC drives, and standard electrical components) 5+ years of experience with Programmable Logic Controls (PLC) programs- 3+ years with SCADA systems and KPI's- 3+ years of experience supporting a wide range of conveyors and sortation systems Leadership and project management experience- Experience with ASRS systems and Computerized Maintenance Management Systems (CMMS)- 1+ year of experience working with Allen Bradley- 1+ years maintaining and troubleshooting robotics systemsAmazon is committed to a diverse and inclusive workplace. Amazon is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. For individuals with disabilities who would like to request an accommodation, please visit https://www.amazon.jobs/en/disability/us.

Quality Carriers, Inc. (QC), headquartered in Tampa, FL, is North America's largest bulk liquidchemical carrier. Through a network of more than 100 terminals and facilities, we transport a broad range of chemical products and provide our customers with value-added transportation services. Why do you want to work at Quality Carriers We offer the the following amazing benefits Competitive PayTool/Boot Reimbursement ProgramWeekly PayReferral ProgramSign on BonusesUnion benefitsMatching 401K Duties/Responsibilities: Diagnose and repair tractors and trailers. Perform annual/systematic 90 day and HM-183 inspections (trailers) on equipment as required. Ensure equipment meets Federal FHWA standards.Operate a yard hostler truck to move trailers within the facility yard and the shop as needed.Order and receive parts and supplies as needed.Adheres to all established safety (OSHA) and environmental policies and standards to include identification, use, and proper procedures for handling or disposal of hazardous waste.Clean, organize and maintain the work environment to ensure equipment longevity and workplace safetyUsing welding equipmentPerform miscellaneous duties as assigned. Required Skills/Abilities: Must possess at least 1 year of experience with general knowledge of equipment theory, principles and repair relating to diesel engines, air, and electrical, mechanical, and hydraulic systems.Must possess at least 1 year of experience with general knowledge of tractor and trailer maintenance, DOT rules and regulations, company policies and procedures.Must be able to work a 10:30pm-7am shift Education Not required (High school diploma, completion of G.E.D., or equivalent vocational school preferred) We offer competitive wages and employee benefits (Flexible spending accounts, generous Paid Time Off/Holiday Schedule, in addition to Medical, Dental and Vision plans). Quality Carriers is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, military/veteran status or other characteristics protected by law. Please note that per Quality policy, we do not accept unsolicited resumes from third-party recruiters unless such recruiters were engaged to provide candidates for a specified opening. Any employment agency, person or entity that submits an unsolicited resume does so with the understanding that Quality will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Pay is $26.75 / hour #CAZL ExperienceRequiredAble to work a 3rd shift ( 10:30pm- 7am )1 year(s): Must possess at least 1 year of experience with general knowledge of tractor and trailer maintenance, DOT rules and regulations, company policies and procedures.1 year(s): Must possess at least 1 year of experience with general knowledge of equipment theory, principles and repair relating to diesel engines, air, and electrical, mechanical, and hydraulic systems.EducationPreferredHigh School or betterHigh School or better

AmeriPro Roofing, one of the largest residential roofing contractors in the nation is immediatelyHiringOutsideSales Representatives in Columbus, OH!Outside Sales Representatives educate and inform homeowners on what they're entitled to through storm damage as it relates to roofing, siding and gutter projects protecting their most valued investment at a fraction of retail costs! Make the income you deserve today!What separates AmeriPro Roofing from the competition Everything...What sets AmeriPro Roofing apart is our fully staffed departments for every stage of the job process, giving Outside Sales Representatives more time in their day! We provide measurements, estimating, supplements, reinspection's, material ordering, sub-contractors, collections of funds, and working with the mortgage company. Don't wait to get paid your hard-earned commissions after the installation. We pay out commissions on collected revenue as you turn in checks. We are a fast-growing company, operating in 40 markets across 19 states, with the goal of 50 branches within 5 years!Outside Sales Representatives are instrumental in that growth!Compensation& Benefits for Outside Sales RepresentativesDraw advancement vs Commission (used as steady pay)Commission on approved sales (paid on collected revenue)$67,000 - $266,000 / yearVehicle allowance (provided for qualifying vehicles)Quarterly Bonus (based on revenue goals)Full Insurance Benefits (Health, Dental, Vision and Life)401K with 4% Employer MatchSales Support Staff (lead generation, customer service, inside sales, supplements, estimating, production)Training & Development ProgramW-2 position (NOT 1099) No project managementCompany Issued Leads Provided (to supplement self-generated)Opportunity for growth and advancementResponsibilities for Outside Sales RepresentativesHunters wanted to prospect, qualify, identify, and close new sales opportunities (targeted canvassing, referrals, preset leads, networking, social media)Manage and maximize assigned territoryConduct exterior property inspection identifying for wind and hail damageConvert inspection to claim filed and contract signedReview Scope of work summaries and sign contract with homeownersMeet the Insurance adjuster on propertyCollect funds and insurance deductible from homeownerObtain Referrals from customers on approved sales/networkingBuild relationships by earning trust with Homeowners (Under Promise and Over Deliver)Educate customers on the industry, products, and AmeriPro’ s policies and proceduresMethodically manage your sales pipeline via our CRMMaintain constant communication with Sales Leadership, homeowners, and office staffPrepare & attend weekly sales meetingsFollow AmeriPro' s Sales System, policies, processes, and proceduresQualifications for Outside Sales Representatives2+ years proven full cycle sales experience (preferred)Must have a reliable working vehicle with insurance coverage (10 years or newer preferred to qualify for allowance)Excellent communication, time management and organizational skillsMust have, or obtain, a smart phone capable of downloading apps and taking pictures.Industry knowledge (preferred)Previous experience using a CRM platform requiredExperience following a documented consultative, sales system preferredSelf Sufficient; Must be able to work in an independent environment.Dedication to personal career development by reaching your set goalsMust have a valid Driver's license (Any State applicable)21 years of age or older preferred (for Insurance purposes)#LP

What You'll Do: Analyze, troubleshoot, repair, and resolve technical issues with equipment or componentsPerform component-level troubleshooting of electronic devices, resolving integration and configuration issues through circuit analysis, waveform calculations, fault isolation, PROM programming, and signal flow tracingInterpret and adhere to schematics and blueprints for repair workApply through-hole and surface soldering techniquesWhat We're Looking For: Technical with Electronics Field of Study preferred High School Diploma or Equivalent Ability to use a 10-key quickly and accuratelyAble to be immobile for long extended periodsAbility to transport 60 Lbs. Able to quickly learn new systems and technologyAble to use relevant computer system applications at a basic level Working Conditions: CLEAN environment requiring ESD protection (provided)Occasional non-standard work hours or overtime as business requiresWhat's In It For You Elective Benefits: Our programs are tailored to your country to best accommodate your lifestyle.Grow Your Career: Accelerate your path to success (and keep up with the future) with formal programs on leadership and professional development, and many more on-demand courses.Elevate Your Personal Well-Being: Boost your financial, physical, and mental well-being through seminars, events, and our global Life Empowerment Assistance Program.Diversity, Equity & Inclusion: It's not just a phrase to us; valuing every voice is how we succeed. Join us in celebrating our global diversity through inclusive education, meaningful peer-to-peer conversations, and equitable growth and development opportunities.Make the Most of our Global Organization: Network with other new co-workers within your first 30 days through our onboarding program.Connect with Your Community: Participate in internal, peer-led inclusive communities and activities, including business resource groups, local volunteering events, and more environmental and social initiatives.Don't meet every single requirement Apply anyway. At Shyft Global Services, a TD SYNNEX Company, we're proud to be recognized as a great place to work and a leader in the promotion and practice of diversity, equity and inclusion. If you're excited about working for our company and believe you're a good fit for this role, we encourage you to apply. You may be exactly the person we're looking for!We are an equal opportunity employer and committed to building a team that represents and empowers a variety of backgrounds, perspectives, and skills. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, gender, gender identity or expression, sexual orientation, protected veteran status, disability, genetics, age, or any other characteristic protected by law.

Description We are currently seeking a full time Facilities Maintenance Generalist/Groundskeeper for the Post Oak Station apartments in Columbus, Ohio.The pay for this position is $17-$20/hr. Wallick Communities gives low-income families, single parents, and senior citizens a place called “home” – thanks to five decades of experience in developing, building, managing and overseeing affordable multi-family housing and assisted-living communities across the mid-west. 55 years serving our communities 24,000+ residents call our community’s home 9 states and growing 1000+ associates 92% associate engagement score Wallick Mission: Opening doors to homes, opportunity, and hope. Wallick Values: Our Values flow directly from our Mission and set the expectation for how all associates work together. These values are: Care Character Collaboration Working at Wallick Communities: Diversity, equity, inclusion, plus belonging. Four impactful words. One powerful and transformative journey. Here at Wallick, we know that when we invest in the equity of each group, all groups benefit. It’s not about one person, one idea, nor any one action. It’s about what we can accomplish together. Join us and work towards creating an inclusive and diverse workforce experience at Wallick. The work - How you will contribute: In accordance with the Wallick Mission and Values, the Facilities Generalist will perform general maintenance duties for communities within the district in a timely manner, taking care to ensure our residents needs are met and comfortable homes maintained to the highest standards. Essential Functions and Responsibilities: - Utilizing company provided technology to complete work orders to include light, general maintenance such as minor repairs related to drywall, replace burned out bulbs, broken blinds, and general landscaping as required by the Community Leader. - Perform general custodial duties such as trash pick-up and removal as needed. - Responsible for maintaining the communities within the district to Company Standards. - Will interact with residents and provide a great experience at every interaction, treating residents with respect and dignity. - Perform other related duties as assigned. About You: - You have a valid driver's license with reliable transportation. - You have a minimum of 1 year previous maintenance or general labor experience, and a working familiarity with basic hand tools. - You are driven to learn basic electrical, plumbing, HVAC, drywall repair and applicable laws governing residential housing. - You pride yourself on providing a great experience for the resident, from communication to quality and timeliness of service. - You’re an adaptable and flexible problem solver. - You are detail oriented with the ability to balance and organize multiple priorities. Physical Demands: requires extensive walking, stooping/bending, balancing, kneeling, squatting, and climbing. Requires the ability to lift 50 lbs. Requires talking, seeing, and hearing with reasonable accommodation. Work Environment: requires work to be performed indoors and outside. Indoor working conditions are often inside a residence within the community, a common area, or in the designated maintenance shop area. Outside work is throughout the community grounds and outdoor common areas. Benefits: - Pay on demand (access your money as you earn it) - Up to 8 weeks of Paid Parental Leave - Paid time off, Holiday pay, and Gift of Time - Health, Dental and Vision insurance effective within 2 weeks - Gym membership or Fitness equipment reimbursement - Company paid life and long-term disability insurance - Voluntary life, short-term disability, accident, critical illness, and hospital indemnity coverage - 401(k) with a 3.5% company match - Tuition reimbursement - Pet insurance Candidates must successfully pass a pre-employment drug screen and background check

This position supports sales efforts at a Sherwin-Williams floorcovering store and coordinates installation through independent contractors to service wholesale floorcovering customers. In this role, you will assist in schedule installation and ensure installation is conducted consistent with expectations. Click hereto learn more about our Floorcovering Division and the services we provide to our customers across the country. The individual selected for this role will be based at Store #701222: 4870 Evanswood Dr, Columbus, OH 43229. Here, we believe there’s not one path to success, we believe in careers that grow with you. Whoever you are or wherever you come from in the world, there’s a place for you at Sherwin-Williams. We provide you with the opportunity to explore your curiosity and drive us forward. Sherwin-Williams values the unique talents and abilities from all backgrounds and characteristics. All qualified individuals are encouraged to apply, including individuals with disabilities and Protected Veterans. We’ll give you the space to share your strengths and we want you show us what you can do. You can innovate, grow and discover in a place where you can thrive and Let Your Colors Show! What is the Process to get Started Step 1 – Online Application Find the role(s) that interest you on our Careers page: https://jobsearch.sherwin.com/ Set aside 15 minutes to create your profile by entering or importing your details from one of our job board partners Step 2 – Digital Interview Upon review of your application, qualified candidates will be invited to complete a digital video interview via HireVue, our interview partner. The interview will consist of a few behavioral based questions You’ll be able to record and complete your video interview anytime, anywhere! While you can complete this video interview on your own schedule, we ask that this step be completed within 7 days of receiving an invitation Step 3 – In-Store Interview Your video interview is reviewed by a member of our Recruitment team and our top candidates are invited to meet with our team in a store, specialty wholesale branch, floorcovering facility or delivery service terminal. At Sherwin-Williams, part of our mission is to help our employees and their families live healthier, save smarter and feel better. This starts with a wide range of world-class benefits designed for you. From retirement to health care, from total well-being to your daily commuteit matters to us. A general description of benefits offered can be found at http://www.myswbenefits.com/. Click on “Candidates” to view benefit offerings that you may be eligible for if you are hired as a Sherwin-Williams employee. Compensation decisions are dependent on the facts and circumstances of each case and will impact where actual compensation may fall within the stated wage range. The wage range listed for this role takes into account the wide range of factors considered in making compensation decisions including skill sets; experience and training; licensure and certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. The wage range, other compensation, and benefits information listed is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. Sherwin-Williams is proud to be an Equal Employment Opportunity/Affirmative Action employer committed to an inclusive and diverse workplace. All qualified candidates will receive consideration for employment and will not be discriminated against based on race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, marital status or any other consideration prohibited by law or by contract. As a VEVRAA Federal Contractor, Sherwin-Williams requests state and local employment services delivery systems to provide priority referral of Protected Veterans. Support the sales efforts at a Sherwin-Williams floorcovering store, servicing wholesale customers.Assist the Branch Manager in developing and implementing floorcovering installation plans to assist in meeting the store’s budgeted sales and profit goalsAssist Sherwin-Williams sales representatives in field measurements including cut sheets, seam diagrams, and product specificationsEnsure all customer orders are accurately measured and cutPerform on-site inspections of installations to ensure customer satisfactionEnsure all installer transactions are handled properly through store computer operating system and records are properly maintainedDetermine floorcovering installation training needs and require training as appropriateMinimum Requirements:Must be at least eighteen (18) years of ageMust be legally authorized to work in the country of employment without needing sponsorship for employment work visa status now or in the futureMust have a valid, unrestricted Driver’s LicenseMust be able, with or without reasonable accommodation, to retrieve material from shelves and floor stacks and lift and carry up to 50 lbs. frequently and up to 70 lbs. on occasionMust be willing to work all scheduled hours, which may include evenings and weekends, with or without reasonable accommodationPreferred Qualifications:Have at least a High School diploma or GEDHave at least one (1) year experience working in a delivery, retail, or customer service positionHave previous work experience selling floorcovering and/or floorcovering productsHave previous work experience installing floorcoveringHave the Carpet and Vinyl Installation Certification by the Carpet and Rug InstituteAbility to read, write, comprehend, and communicate in more than one languageAbility to read, write, comprehend, and communicate in Spanish

Overview: Boyd's Tire & Service has been providing drivers in Central Ohio with the best automotive products and services since 1996. We strive to provide you with high-quality tires and reliable car repairs at our several locations in Columbus, Blacklick, Hilliard, Lewis Center, Marysville, and Central Ohio. Our staff is ready to go above and beyond to help you meet your needs, to get you back on the road, satisfied.The Automotive Technician is responsible for effectively and efficiently diagnosing and repairing customer vehicles while adhering to the MAP guidelines and in accordance with dealership, manufacturers and Boyd's Tire standards. COMPENSATION : VARIES UPON EXPERIENCE*Jr Auto Tech: $20 to $25/HR* Sr Auto Tech: $25 to $40/HR Principal Duties and Responsibilities: Diagnoses vehicles according to the appropriate level of certifications/experience. Performs work as outlined on the Multi-point Inspection and/or Repair Order with efficiency and accuracy. Explains technical diagnosis and needed repairs to non-mechanical individuals which may include the Store Manager, Service Consultants and/or customers. Recommends services that are necessary to keep the customer's vehicle in running condition; properly documents all recommendations in customer file. Follows all safety procedures and reports any concerns to the Shop Foreman or Store Manager. Maintains appropriate ASE certifications and renewals of expiring certifications. Automotive Technician Benefits: Competitive Bi-Weekly Pay Tuition Reimbursement, up to $3,000 annually Paid Vacation and Sick Time 6 Paid Holidays Medical, Dental and Vision Insurance (Effective 1 st of the Month after Hire) Life Insurance (Company paid) 401(k) Retirement Savings Plan with Company Match Discounted Services on Personal and Immediate Family Vehicles Opportunity for Advancement! Qualifications: Prefer a minimum of one unexpired ASE or equivalent experience or training. Possess valid driver's license or obtain a valid driver's license within 30 days of hire date. Ability to work a minimum of five days, including Saturdays. Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.#bayard

Job SummaryOur Meat Team Leader manages the entire Meat Team and keeps it running like a well-oiled machine. Leaders are accountable for the operating performance of the department at all times. Be a Leader by representing the organization in a professional manner. Promote and develop individuals with mutual respect, inclusion, diversity and dignity. Coach Team Members on a regular basis with timely feedback identify opportunities for development and coach for success. "Job DescriptionExperience Required: Retail work experience or Store Leader recommendation; Meat CuttingExperience Desired: Retail leadership or supervisory experience; Successful performance as a Peer Trainer or other similar role; Successful performance as an in-store champion (e. g., safety, service, wellness) or similar role; Demonstrated product knowledge relevant to department; Satisfactory performance and discipline recordEducation Desired: High school diploma or equivalentCertification or Licensing Required: Meat Cutting, Meat Processing or Meat ScienceLifting Requirement: Up to 100 poundsTravel Required: NoneAge Requirement: At least 18 years of ageJob ResponsibilitiesYour principal, main, major or most important duty includes one or some combination of the following tasks:1. interview, select and train Team Members;2. direct the work of Team Members;3. appraise Team Members' productivity and efficiency for the purpose of recommending promotions or other changes in status;4. handle Team Member issues including, but not limited to complaints;5. discipline Team Members;6. plan the work;7. distribute or assign the work among Team Members;8. provide for the safety and security of Team Members or the store;9. manage the budget for your department or location;10. manage inventory for your department or location; or11. monitor or implement compliance measuresDirect, oversee, and evaluate training provided to department Team Members to reduce turnover, promote efficiency and control labor costs. Provide motivational leadership to an amazing team by focusing on respect and by setting an exemplary example. Identify strengths and opportunities of the team and think strategically when making moves and scheduling. Develop future leaders, identify Team Members who are poised to rise through the ranks and remember our people are our best asset! Nurture an environment of inclusion and diversity, giving each Team Member a voice. Maintain safety as the top priority in all aspects of our work: for Team Members, for guests and for products. Inspire the team and our guests with a passion for food and a willingness to go the extra mile to provide the best product. Set and reach aggressive sales and profit goals by making suggestions when appropriate, while also managing shrink. Establish an ongoing communication plan with the team, ensuring that all Team Members are informed and prepared to put their best food forward! Communicate with the merchandising team to ensure that promotions are properly communicated to Team Members and guests. Make innovative plans and suggestions to improve our business. Review and analyze both stores financial, LOB reports, and historical reports to improve performance in sales, profits, shrink, labor controls, and reduction. Oversee period inventories for accuracy and monitor weekly fluctuations in inventory and shrink dollars. About UsAt Giant Eagle Inc., we’re more than just food, fuel and convenience. We’re one giant family of diverse and talented Team Members. Our people are the heart and soul of our company. It’s why we strive to create a nurturing environment that offers countless career opportunities to grow. Deep caring and solid family values are what makes us one of the top work places for jobs in the Greater Pittsburgh, Cleveland, Columbus and Indianapolis Areas. From our Warehouses to our GetGo’s, our grocery Stores through our Corporate home office, we are working together to put food on shoppers' tables and smiles on their faces. We’re always searching for the best Team Members to welcome to our family. We invite you to join our Giant Eagle family. Come start a lasting career with us.

Job SummaryOur Meat Team Leader manages the entire Meat Team and keeps it running like a well-oiled machine. Leaders are accountable for the operating performance of the department at all times. Be a Leader by representing the organization in a professional manner. Promote and develop individuals with mutual respect, inclusion, diversity and dignity. Coach Team Members on a regular basis with timely feedback identify opportunities for development and coach for success. "Job DescriptionExperience Required: Retail work experience or Store Leader recommendation; Meat CuttingExperience Desired: Retail leadership or supervisory experience; Successful performance as a Peer Trainer or other similar role; Successful performance as an in-store champion (e. g., safety, service, wellness) or similar role; Demonstrated product knowledge relevant to department; Satisfactory performance and discipline recordEducation Desired: High school diploma or equivalentCertification or Licensing Required: Meat Cutting, Meat Processing or Meat ScienceLifting Requirement: Up to 100 poundsTravel Required: NoneAge Requirement: At least 18 years of ageJob ResponsibilitiesYour principal, main, major or most important duty includes one or some combination of the following tasks:1. interview, select and train Team Members;2. direct the work of Team Members;3. appraise Team Members' productivity and efficiency for the purpose of recommending promotions or other changes in status;4. handle Team Member issues including, but not limited to complaints;5. discipline Team Members;6. plan the work;7. distribute or assign the work among Team Members;8. provide for the safety and security of Team Members or the store;9. manage the budget for your department or location;10. manage inventory for your department or location; or11. monitor or implement compliance measuresDirect, oversee, and evaluate training provided to department Team Members to reduce turnover, promote efficiency and control labor costs. Provide motivational leadership to an amazing team by focusing on respect and by setting an exemplary example. Identify strengths and opportunities of the team and think strategically when making moves and scheduling. Develop future leaders, identify Team Members who are poised to rise through the ranks and remember our people are our best asset! Nurture an environment of inclusion and diversity, giving each Team Member a voice. Maintain safety as the top priority in all aspects of our work: for Team Members, for guests and for products. Inspire the team and our guests with a passion for food and a willingness to go the extra mile to provide the best product. Set and reach aggressive sales and profit goals by making suggestions when appropriate, while also managing shrink. Establish an ongoing communication plan with the team, ensuring that all Team Members are informed and prepared to put their best food forward! Communicate with the merchandising team to ensure that promotions are properly communicated to Team Members and guests. Make innovative plans and suggestions to improve our business. Review and analyze both stores financial, LOB reports, and historical reports to improve performance in sales, profits, shrink, labor controls, and reduction. Oversee period inventories for accuracy and monitor weekly fluctuations in inventory and shrink dollars. About UsAt Giant Eagle Inc., we’re more than just food, fuel and convenience. We’re one giant family of diverse and talented Team Members. Our people are the heart and soul of our company. It’s why we strive to create a nurturing environment that offers countless career opportunities to grow. Deep caring and solid family values are what makes us one of the top work places for jobs in the Greater Pittsburgh, Cleveland, Columbus and Indianapolis Areas. From our Warehouses to our GetGo’s, our grocery Stores through our Corporate home office, we are working together to put food on shoppers' tables and smiles on their faces. We’re always searching for the best Team Members to welcome to our family. We invite you to join our Giant Eagle family. Come start a lasting career with us.

The pay range per hour is $28.20 - $31.68Pay is based on several factors which vary based on position. These include labor markets and in some instances may include education, work experience and certifications. In addition to your pay, Target cares about and invests in you as a team member, so that you can take care of yourself and your family. Target offers eligible team members and their dependents comprehensive health benefits and programs, which may include medical, vision, dental, life insurance and more, to help you and your family take care of your whole selves. Other benefits for eligible team members include 401(k), employee discount, short term disability, long term disability, paid sick leave, paid national holidays, and paid vacation. Find competitive benefits from financial and education to well-being and beyond at .Engineering & Facilities - Maintenance Technician 1 (MT1)About job:Currently hiring for below shifts:A2 Key - Saturday, Sunday, Monday from 5:00pm to 5:00amup to $3.00 shift differentialTuition Reimbursement programBenefits eligible within two weeks of employmentAbout us:Working at Target means helping all families discover the joy of everyday life. We bring that vision to life through our values and culture. .A role in a Supply Chain Facility means being on the very front lines of getting product to the guest as fast as possible—a critical differentiator and one of the most essential Logistics functions. You’ll reach beyond the bounds of your team to partner across the enterprise and find solutions to support the business. Whether it’s through focusing on our regional or upstream distribution centers, import warehouses, or fulfillment and flow centers, you’ll have a chance to positively impact thousands of fellow team members and Target guests worldwide, further differentiating Target from all the rest.As an Engineering & Facilities Maintenance Technician 1 (MT1), you will maintain and repair automated material handling and facility equipment, and ensure high equipment availability rates. You will use preventive and predictive maintenance processes, and rapidly troubleshoot equipment breakdowns and quickly restore equipment to service to support the successful operation of the supply chain facility. You will work with other Target mechanics to solve problems, validate quality of work for outside specialty contractors, and meet aggressive time lines. You will collaborate with Senior Systems Engineers to perform Root Cause Analysis for equipment failures. You will operate Target owned vehicles to complete maintenance activities on the exterior of the facility and within the trailer yard, as well as travel to nearby facilities and local stores to procure parts and supplies as needed. This is an entry-level position in the technician role with promotion potential to Maintenance Technician 2, by completing and demonstrating proficiency in all related Maintenance Technician 2 job requirements, measured by both hands-on validation and by a written assessment. A successful candidate in this role will:Maintain and perform basic troubleshooting of electrical and mechanical aspects of Material Handling Equipment (MHE) on site, including conveyor systems, sortation, scales and printer applicatorsDemonstrate mechanical proficiency for hydraulic and pneumatic systems, and AC/DC electrical motors and drivesAdjust, reset, repair, or replace adjustable components (belts, chains, cables) and wearing components (guides, bearings, wheels, rollers, pulleys)Maintain and troubleshoot motors, photo eyes, relays, proximity sensors, solenoids, motor starters, tachometers, encoders, etc.Clean, lubricate, and calibrate equipmentUse appropriate job plans, procedures, and manualsPerform preventative maintenance on facility equipment (i.e. Powered Industrial Trucks, HVAC, air compressors and dryers, and balers)Perform basic electrical maintenance and simple repair/replace of various electrical circuits and related electronic equipment, using tools such as multi-meters and infrared thermometers Read and understand basic electrical and electronic schematicsUtilize handheld devices and asset management system mobile apps to create and close Work Orders with appropriate data (labor hours, downtime, problem/cause/remedy, and parts used)Develop and maintain positive working relationships across all levels of the organizationFollow appropriate safety procedures and use Personal Protective Equipment (PPE) while maintaining equipment (Lock Out/Tag Out, Arc Flash, etc.), and ensure a safe work environment by eliminating potential equipment safety hazardsCore responsibilities of this job are described within this job description. Job duties may change at any time due to business needs.About you:Physical Demands (must be able to perform with or without reasonable accommodation):Regular bending, lifting, stretching and reaching both below the waist and above the headLift and move totes or cartons up to 49 pounds eachWalking within and around the site with great frequencyAbility to climb ladders and gangways safely and without limitation, and work off platforms and equipment at significant heightsFull manual dexterity in both hands and wrists, eye/hand coordination, feet (foot pedals), manual (picking, pinching, holding, grasping), and wrist motion (repetitive flexion/rotation)Working conditions may include small spaces, dust, fumes/odors, hot/cold temperatures, inside/outside noise, vibration, standing on concrete for long hours and wet or uneven surfacesAbility to stand/walk for up to 10-12 hoursQualifications:High school diploma or equivalent requiredPossess or ability to obtain a valid driver’s licenseBasic PC competency and ability to use mobile apps on handheld devicesFamiliar with simple wiring diagrams, symbols and electrical measuringExperience in the following areas:Work order managementPreventive/predictive maintenance proceduresCommonly used industrial toolsBasic Carpentry and PlumbingBasic blueprint and schematic readingBasic AC/DC electrical and electronic principlesBasic metal fabrication and weldingBasic Industrial ControlsDesired:Degree from a vocational school or college with a focus in the Mechanical or Electrical field2+ years apprenticeship or equivalent experience in the Mechanical or Electrical fieldExperience with automated conveyor systems and controlsExperience with Material Handling Equipment (MHE) safety standardsExperience with Programmable Logic Control (PLC) programs and Human Machine Interfaces (HMIs)Ability to troubleshoot basic Input/Output functionsExperience with robotic operation/ maintenanceAmericans with Disabilities Act (ADA)Target will provide reasonable accommodations with the application process upon your request as required to comply with applicable laws. If you have a disability and require assistance in this application process, please visit your nearest Target store or Supply Chain Facility or reach out to Guest Services at 1-800-440-0680 for additional information.

1. Performs regularly scheduled preventative maintenance on general electrical and plumbing systems, conveyor systems, electronic sorters, forklifts and various other powered material handling equipment. 2. Performs troubleshooting on equipment breakdown as instructed including disassembly, repair, parts replacement and parts fabrication to minimize equipment downtime. 3. Performs general carpentry, painting, electrical, welding, plumbing and HVAC installations as required. 4. Installs and repairs DC storage racks as required. 5. Maintains and completes various maintenance documents including but not limited to work order requests, preventative maintenance and daily job breakdown summaries, parts requests and parts purchase orders. 6. Performs semi-routine duties where some judgment is required. Work is performed under defined and uniform procedures. 7. Exhibits reasonable care and operation of powered material handling equipment. 8. Maintains the integrity of our Mission, Vision and Values statement while performing daily job duties.Qualification1. Strong English, reading and Math skills required. 2. Three to five years electrical, mechanical and maintenance related experience is required. 3. Strong mechanical, welding, carpentry, plumbing and AC/DC electrical circuitry knowledge through 440, 3-phase required. 4. Excellent hand and eye coordination required. Ability to climb and work at high elevations required. 5. Ability to interpret blueprints, schematics, utilize basic hand tools and electrical and/or electronic test equipment including volt/ohm meters and amp probes strongly preferred. 6. Ability to handle multiple tasks, be detail oriented, meet department standards and perform duties without immediate and constant supervision. 7. Previous Computer Maintenance Management System (CMMS) knowledge preferred. 8. Previous experience in the repair of powered material handling equipment strongly preferred. 9. Ability to perform physical activity at a sustained pace within the Distribution Center environment including walking, bending and lifting a minimum of 60 pounds is required.We will consider for employment all qualified applicants, including those with criminal histories, in a manner consistent with the requirements of applicable state and local laws.

Job Description Summary Performs maintenance and general repair services in specified markets of anywhere from 10-15 of our Kohl's stores, ensuring Company Brand Standards are maintained. Mileage is reimbursed for travel to and from the stores in the specified market. Performs all work in a quality manner following all safety rules and regulations. Responsible for meeting budgets and communicating effectively with both internal and external customers.ACCOUNTABILITIESGENERAL MAINTENANCEResponsible for timely and accurate completion of work orders as assigned by supervisorEnsures all necessary material and tools to perform daily work are available and kept in good condition (Kohl’s provides all needed tools)Performs Interior Store Repair and Maintenance as assigned by Territory Facilities Manager with a focus on Door (interior and exterior) and Plumbing (faucet, toilet, hot water heater, etc.) repairPerforms Interior Lighting and Electrical repairs including but not limited to lamp/ballast replacement, minor outlet repairs, once per year 90 minute emergency light testing and repairs, etc.Proficient in other Interior Repair and Maintenance items including but not limited to flooring, carpet, tile, patch and paint, carpentry, laminate, wallpaper, fixture, and stroller/ cart, and cleaning equipment repairsPerforms exterior maintenance of building including but not limited to low elevation (can be reached with a 12ft ladder), building painting, curb/ramp painting, power-washing, and minor Common Area Maintenance repairs of landscaping, signage, and concrete/asphaltIDENTIFY MAINTENANCE ISSUES Assists stores with Housekeeping problem solving with suggested solutions for Store Associate teams and Contract Cleaning providers to increase CLEAN presence in stores.Communicates safety and cleanliness issues and action plans to resolve with Store Management and Territory Facilities ManagerIdentifies Interior and Exterior maintenance issues that need resolution by exterior vendors and enters those issues into Web Based Facilities Management program for assignment and completionCommunicates recaps regularly to Territory Facilities Manager and/or Store and District Managers of stores visited, wins/opportunities found, as well as issues resolved on store visits. Communication may be verbal or email QUALIFICATIONSREQUIREDAbility to work independently without direct face to faceAbility to effectively communicate with multiple levels in Store organization verbally and writtenProficient in Microsoft Word, Excel, navigation of websites and able to utilize new computer systems, including smartphones1-4 years of prior maintenance work with a strong focus in Door, Plumbing, Electrical / Lighting, and general repair servicesPrior retail or office building maintenance experienceFamiliar with General Maintenance tools and tasksPREFERREDAbility to repair a variety of other interior/exterior issues as assigned by Supervisor including equipment and CAM itemsSPECIALModerate lifting – 25 to 50lbs on a regular basisDaily travel to local stores and occasional overnight travel to outlying stores. Mileage reimbursement provided.Ability to climb/work on ladders up to 12ft in height in order to address lighting, painting, etc. issuesValid driver’s license with a currently registered vehicle

Business Unit Description: Michael Foods, Inc. is a leader in the food processing and distribution industry with business in egg products, refrigerated grocery and potato products. We offer exciting job possibilities throughout our organization where you can enhance your career, sharpen your talents and make an impact. Join our company and be part of an innovative team that’s First in Food. Location Description: Michael Foods, Inc. located in the Village of West Jefferson, OH, is located just minutes from the western suburbs of Columbus and about 20 minutes to the west of downtown. We are proud to be Michael Foods’ most recent greenfield project, producing high quality protein shakes serving people all around the world. It’s our honor to continue our strong commitment to our employees, our community, and our environment. Responsibilities: Assumes personal responsibility to insure a safe and healthy workplace for everyone. Adheres to all safety policies/procedures and incorporates safety and health in all job’s duties/tasks. Adheres to safe work practices, follows GMP’s, maintains sanitary conditions and ensures that product quality is maintained. Reports any conditions or practices that may adversely affect employee safety or food safety/quality to management immediately. Attends and actively participates in safety meetings/trainings.Ensures regulatory compliance at all times.Complete preventative maintenance requirements on all equipment.Monitor efficiency of all equipment and troubleshoot when necessary.Remove or replace defective parts by dismantling and reassembling equipment.Adjust all necessary components of equipment as needed.Repair and adjust all doors as needed.Must adhere to budget, USDA, OSHA, SQF, and FDA compliance guidelines.Perform other duties as assigned. Qualifications: EDUCATION: High school diploma or general education degree (GED) or equivalent.LANGUAGE SKILLS: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations.MATHEMATICAL SKILLS:Ability to add and subtract two-digit numbers and to multiply and divide with 10’s and 100’s. Ability to perform these operations using units of American money and weight measurement, volume and distance.REASONING ABILITY:Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.OTHER SKILLS AND ABILITIES:Specific skills and abilities required that are not included in other sections:Ability to function in a teamwork environment.Must be well-organized.Must be detail oriented.Ability to plan and prioritize activity.Ability to comply with all safety rules and regulations.Basic computer skills.Ability to work safely with chemicals

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationA High School Senior (age 17 or older)*, High school diploma, a GED, or 15 college semester hours *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Paid Time Off · Health Benefits Day One · 401K Match · No Travel At Bath & Body Works, everyone belongs. We are committed to creating a diverse, equitable and inclusive culture focused on delivering exceptional fragrances and experiences to our customers. We focus on recruiting, retaining, and advancing diverse talent where our associate population is as diverse as the communities we serve, live and work. In addition, we work to improve our communities and our planet in a way that will make us proud for years to come because we believe the world is a brighter, happier place when everyone has access to the things that make them happy. Summary HVAC Technician is capable of performing in all areas related to HVAC systems and Building Automation. Responsibilities include, but are not limited to: Performing maintenance and service repairs on heating, ventilating, and air conditioning systems. Install new units or replacement parts for existing units according to specifications and established safety guidelines, depending upon the immediate needs of the department. While HVAC Technicians may have developed skills in one or more areas, all are expected to be able to perform general Maintenance and repair in all areas of assignment. Reports to the Supervisor of HVAC Maintenance and provides support to the HVAC Team. Responsibilities Performs maintenance and service repairs on heating, ventilating, and air conditioning systems. Installs new units or replacement parts for existing units according to specifications and established safety guidelinesPerforms skilled and semi-skilled maintenance activities including performing material handling equipment troubleshooting and repair; basic activities such as electrical and plumbingMaintains building, equipment, shop, and storage areas in a clean and orderly conditionCompletes work orders for work performed and includes parts and inventory usedDocument all work order activitiesResponsible for productivity/accountability of assigned work orders and daily activitiesFollow lockout-tag-out procedures, confined space procedures, and other safety and environmental procedures/policies and ensure compliance with all company policies, building codes, and safety initiatives as assignedSupport projects including collaborating with leadership and contractors/vendors, as assignedPunch list all assigned projects and tasks to ensure alignment with company standards and specificationsParticipate in all Preventive Maintenance tasks and Inventory Management as assigned Qualifications & Experience Possession of a high school diploma or equivalent and 3-5 years of verifiable assignment-related maintenance experience, or an equivalent combination of education and experience sufficient to successfully perform the essential duties of the job as listed abovePossession of a valid driver’s license and a satisfactory driving recordEPA Certification Type I and II required; Universal preferredCommercial experienceElectrical experience with high and low voltage, AC and DCEnergy Management Systems and DDC Controls experienceKnowledge of mechanical and electrical drawingsMust be able to navigate computers and applicable softwareAbility to be flexible with work assignments and schedulesObtain Power Equipment and Man-lift LicenseWork as a teammate within the department and across the businessWelding skill preferred, but not required Core Competencies Lead with Curiosity & HumilityBuild High-Performing Teams for Today & TomorrowInfluence & Inspire with Vision & PurposeObserve, Engage & ConnectStrive to Achieve Operational ExcellenceDeliver Business Results Benefits We invite you to join Gingham Nation, where we invest in our associates through competitive compensation, benefits, and development opportunities, so they can continue to be their best at work, at home, and in their communities. Benefits offered to our eligible associates include a no cost mental health and well-being program, health coverage with a variety of plans to choose from, flexible and affordable saving programs, paid time off and a merchandise discount. Visit bbwbenefits.com for details. View Benefits Information The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required. We are an equal opportunity and affirmative action employer.We do not make employment decisions based on an individual’s race, color, religion, gender, gender identity, national origin, citizenship, age, disability, sexual orientation, marital status, pregnancy, genetic information, protected veteran status or any other legally protected status, and we comply with all laws concerning nondiscriminatory employment practices. We are committed to providing reasonable accommodations for associates and job applicants with disabilities. Our management team is dedicated to ensuring fulfillment of this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, associate activities and general treatment during employment. We only hire individuals authorized for employment in the United States.

Title: MachinistShift: 2nd & 3rd Shifts available with a 10% shift differentialBuild an Aviation Career You're Proud OfWe're committed to the quality of work we do at every level. You'll achieve more with us through our training, high standards, and focus on preparation. Help us set the bar high across our entire organization so we can keep making an impact on the aviation world.Help us set the bar high across our entire organization so we can keep exceeding customer expectations. You'll play a vital role in ensuring the reliability of aviation repair and maintenance through training and preparation.Determines and documents the modification status/configuration of products being processed for repair or overhaul to verify compliance to the applicable regulatory and customer requirements.Specific AccountabilitiesReads and interprets specification manuals, blueprints, templates and layouts to determine machining operation to be performed.Computes dimensions and tolerances and measures and lays out work pieces.Verifies dimensions of products for accuracy and conformance to specifications using precision measuring instruments such as calipers, gauges and micrometers. Troubleshoots, debugs and modifies to achieve expected performance.Adjusts and sets up machine tools for use by machining tool operators.Participates in continuous improvement of cell processes.Cross trains in other complementary skills and seeks endorsements for those skills as needed to support production requirements.Moves between production assignments that utilize multiple skills endorsements as needed to support production requirements.Participates in the cross training of other technicians as needed to support production requirements.Responsible for observing all applicable safety requirements and reporting immediately any unsafe practices/conditions.Carries out other duties as assigned.Technical RequirementsHigh degree of mechanical aptitude, accuracy and precision.Thorough knowledge of manufacturing, tool design, fabrication methods and processes, metallurgy and heat treating.Working knowledge of welding, hydraulics, electricity and pneumatics.Proficient in the use of precision measuring instruments and hand tools.Ability to read, understand and interpret blueprints.Strong mathematical aptitude.Working knowledge of related company instructions, company processes, rework process instructions, original equipment manufacturer manuals, and MSDS labels.Working knowledge of production management computer systems and other related internal control systems.Ability to lift up to 50 pounds (unassisted) for approximately 25% of the average work day.Regularly required to stand for prolonged periods.Completion of a machinist apprenticeship program; or equivalent.Attainment of trade certification.Must be a US CitizenBackground InformationThe typical minimum level of education to perform this job competently is equivalent to high school graduation and completion of a diploma training program at a college or technical school. The person requires an ability to understand, utilize and communicate specialized information in speech and written text. This specialized training is often formalized and recognized by a specific certificate, diploma or license.Directly/indirectly related work experience representing continuous learning and required for someone to perform this job competently is one to three years.Ongoing work assignments typically have clearly defined goals. The incumbent's education, training, and previous experience ensure work assignments are successfully carried out because he/she understands what is expected, as well as the best approach to take.Benefits that make life better:Comprehensive Healthcare401(k) with 100% company match; up to 5% vestedPaid Time Off starting on day oneBonus opportunitiesHealth- & Dependent Care Flexible Spending AccountsShort- & Long-Term DisabilityLife & AD&D InsuranceLearning & Training opportunitiesRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardStandardAero offers equal employment opportunities for all. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture.About UsRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero

What this job involves –The Maintenance Mechanic supports operation, inspection, and maintenance processes to mechanical, electrical, plumbing and kitchen equipment and systems in assigned facilities. Assists Mobile Engineers (HVAC/R) and Control Systems Technicians in maintenance and repair efforts, as well as independently performing defined tasks.What is your day to day Maintain lighting system bulbs and ballastsAssist the operations team in the maintenance and repair of building and equipmentGeneral interior maintenance – HVAC/R coil cleaning, evaporator coil cleaning, kitchen equipment maintenance (meat grinder, cuber, meat saw, slicers, etc.).Minor plumbing repairsCompletes special tasks that include but are not limited to; painting, locksmith work, tenant services requests, and general maintenance as assigned.This position requires the employee to be on call for after-hours emergencies.Complies with all policies for the safe storage, usage and disposal of hazardous materials.Desired experience and technical skillsRequired:Candidate must possess and maintain a valid state driver’s license.High school diploma or GED equivalentSuccessful candidate must be a self-motivated individual who can work independently or in a team environment.Preferred:Completion of an applicable technical training program is desirable, have a minimum of one (1) year of applicable working experience in general building repair and maintenance, basic plumbing, and basic electrical.Position requires frequent climbing, bending, kneeling, lifting, and driving.Position requires excellent communication skills in English, both oral and written.Candidate will be provided with tools required to perform assigned work scope.

Our client, a high profile global corporation,is seeking a Infrastructure Delivery/Cable Install Technician to join their team. As an Infrastructure Delivery/Cable Install Technician, you will be part of the installation teamsupporting day to day installation of servers and network equipment, structured cabling, and capacity management. The ideal candidate will be a proactive go-getter with strong technical aptitude and the ability to deal effectively with peoplewhich will align successfully in the organization. Job Title: Infrastructure Delivery Cable Install Technician Location: Dublin, OH Pay Range: $25.04/HR on Experis W2 What’s the Job Partner with cable vendors to install, inspect and troubleshoot cabling Installation and maintenance of copper and fiber cable infrastructureInstall, test and troubleshoot fiber optic and copper cabling, including patch panels and patch cords Ensure that the Data Center and vendor installations comply with all installation practices Report current status via ticketing system, status reports, email and Slack Manage work and priorities through ticketing system and workflows to complete customer requests and projects Work with a partner to move integrated enterprise equipment from loading docks into planned positions What’s Needed To be successful in this role you should possess technical aptitude, written and oral communications skills and the ability to deal effectively with people in a wide variety of situations. In addition, you must possess strong analytical skills with demonstrated problem solving ability. You will be able to leverage your experience exercising high levels of initiative, judgment, and diplomacy. Cabling, data center, infrastructure experienceBasic computer knowledge, MS SuiteMilitary experience preferred What’s in it for me Medical/Dental/Vision/401K/Holiday PayOpportunity to support cutting-edge technology of brand new service offeringsChance to convert to permanent with this companyProfessional growth opportunities If this is a role that interests you and you’d like to learn more, click apply now and a recruiter will be in touch with you to discuss this great opportunity. We look forward to speaking with you! About ManpowerGroup, Parent Company of:Manpower, Experis, Talent Solutions, and Jefferson Wells ManpowerGroup® (NYSE: MAN), the leading global workforce solutions company, helps organizations transform in a fast-changing world of work by sourcing, assessing, developing, and managing the talent that enables them to win. We develop innovative solutions for hundreds of thousands of organizations every year, providing them with skilled talent while finding meaningful, sustainable employment for millions of people across a wide range of industries and skills. Our expert family of brands –Manpower, Experis, Talent Solutions, and Jefferson Wells– creates substantial value for candidates and clients across more than 75 countries and territories and has done so for over 70 years. We are recognized consistently for our diversity - as a best place to work for Women, Inclusion, Equality and Disability and in 2022 ManpowerGroup was named one of the World's Most Ethical Companies for the 13th year - all confirming our position as the brand of choice for in-demand talent.

Be part of the future!We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference.What we offer:Competitive Starting PayPaid TrainingGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceHealth Savings Account (HSA)Life Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramAnd More!What you will do:Receive service calls from Service Resource Center, including a brief description of equipment/system malfunctionsContact customer representative and ascertain equipment/systems problemsDiagnose problems and perform service and repairs on electronic fire alarm systems and other related building system products at customer sitesFollow prescribed troubleshooting procedures and refer to technical manuals, part manuals, change notices and bulletins, modification notices, etc. to repair equipmentService, troubleshoot and install many different manufacturers’ Fire & Life Safety systems including SimplexGrinnellRead and interpret blueprints, diagrams, submittals, specifications software/systems, programs, schematics and operational product manualsExhibit excellent customer service skills by consistently communicating with the district staff and customers to ensure customer satisfactionComplete Service Acknowledgements with proper coding through communication devices, such as smart phones and laptop computersObtain customer signature upon completed service call assignmentParticipate in a scheduled On-call rotationHelp to train or mentor others on the service teamProvide our customers with the highest level of service to solve building inefficiencies and resolve service related items. As a trusted advisor to our customers you will provide solutions and outcomes at the time of servicePerform other duties as assignedHow you will do itThis skilled position involves troubling shooting and repairing installed systems. Including panel repair/reprogram, device replacement/repair, resolving low voltage circuit troubles and system testing.Organize and effectively utilize technical resources, information, material, and support to assure efficient execution of all assigned tasks.Candidate must possess excellent written/verbal communication and outstanding customer service skills.Position involves the programming of fire alarm, security, and access control system panels.Experience CCTV and IT and IP networks a plus.Complete and submit all required task-related, activity, productivity, and other documentation in a timely manner.On call and after hours work required on occasion at customer need.Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities.Provide quotes to support recommendations and solutions.What we look for:Required5+ years documented experience in low voltage electrical systems, including Fire/Life Safety systems, Access Control, Nurse Call, and Paging systems.NICET ll Level II certification - PreferredExperience in reading and interpreting blueprints, submittals, and operational/product manuals.Knowledge of test equipment, multi-meter, digital analyzer, and commissioning devices.High School Diploma or equivalentAbility to follow verbal and written instructions.Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs.Able to work in unusual and sometimes difficult position such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etcAbility to work flexible hours including weekends to meet customer requirements.Overnight travel may be required.Demonstrate a high level of customer service.Maintain truck inventory to ensure timely response to customer needs.Ability to adhere to, implement, and follow safety guidelines and procedures at all times.Strong organizational skills, positive attitude, and an ability to learn quickly.Possess a valid driver’s license and driving record that meets company requirements.Retain any licenses that are required by National, State and Local codes.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Job PurposePlease Note: This position is an Entry Level (0-3 years experience) position.Sponsorship for employment visa status for these positions is unavailable. Applicants requiring sponsorship for employment visa status now or in the future (e.g., F-1 CPT/OPT, H-1B, TN, etc.) will not be considered.In this role you will be responsible for the design and maturation of HVAC components as you work with a group of supportive and experienced engineers in a fast paced, continuous learning environment. As an associate within the Interior Development Division, you will be responsible for exceeding customer’s expectations by contributing to their “fun to drive” experience, as your designs will contribute to the customer’s comfort each time they drive. Key AccountabilitiesResponsible for, and able to clearly convey, part design details (customer usability, assembly, material, texture, maintenance, tooling technical requirements, etc.)Setting vehicle targets and achievement methodsCollaboration, communication and negotiation with other design groups, manufacturing, Styling, and suppliers to ensure the vehicle image can be met while meeting all regulations and part technical requirementsCreation of detailed layouts (2D), basic part data (3D) and drawingsManage part cost and investment throughout development to ensure program targets are being metProblem Solving to address part concernsHands on activity –communicating design ideas using VR or mock-upsSchedule and milestone management, including part testing and validation activitiesQualifications, Experience, and SkillsBachelor’s degree in Mechanical, Aeronautical, or Automotive Engineering, or Industrial Design.0-2 years of relevant experience.Past experience with CAD software (Catia V5 or V6 preferred).MS Office proficiency (Outlook, Teams, PowerPoint, Excel, etc.).Organization and communication skills.Ability to travel and work overtime as needed.Working ConditionsPrimary working location is seated at a desk.Limited lifting of parts and part dunnage maybe required on occasionOT required as necessary to achieve program deliverables.This role requires that the candidate be able to drive and requires possession of a valid driver's license.What differentiates Honda and make us an employer of choice Total Rewards:• Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)• Paid Overtime• Regional Bonus (when applicable)• Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)• Paid time off, including vacation, holidays, shutdown• Company Paid Short-Term and Long-Term Disability• 401K Plan with company match + additional contribution• Relocation assistance (if eligible)Career Growth:• Advancement Opportunities• Career Mobility • Education Reimbursement for Continued Learning• Training and Development programsAdditional Offerings:• Tuition Assistance & Student Loan Repayment• Lifestyle Account• Childcare Reimbursement Account• Elder Care Support• Wellbeing Program• Community Service and Engagement Programs• Product Programs• Free Drinks OnsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.