FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Req ID:457347Address: 2689 Sidley Ct Austinburg, OH, 44010Benefits:* Fuel Your Growth with Love's - company funded tuition assistance program * Paid Time Off * Flexible Scheduling * 401(k) – 100% match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Welcome to Love’s!Diesel Technicians work in a fast-paced environment and maintain clean places with friendly faces. You will interact with customers & drivers from all over, making their travels and their day better. Job Functions: Troubleshoot and repair light mechanical issues that may include wheel-end assemblies, electrical systems, suspensions, A/C, or engine componentsAssist customers with roadside servicesProvide preventative maintenance servicesAbility to move, lift 75+ pounds working in close quarters. Ability to work in various temperatures.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Work a rotating schedule that alternates between day and night as needed.Ability to obtain a medical card through the Department of Transportation. (paid by Love’s) Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Mentor Employment Status: Salary Full-Time Function: Engineering Pay Range: ($88,600.00- $146,200.00) Target Bonus: % Req ID:25976 SummaryLincoln Electric has a terrific opportunity for an experienced Mechanical Engineer to join our Cleveland manufacturing operation. Plant Engineering implements capital projects and provides engineering support for the Consumable and Machine divisions of the Cleveland operations. As part of this critical team, the Mechanical Engineer will be responsible for mechanical aspects of projects including facilities preparation, equipment designs and equipment installations. You will also provide support for production and work on improvements to the existing equipment and facilities to improve health and safety, productivity, quality, and cost.In addition to competitive pay, Lincoln Electric offers a lucrative profit-sharing plan, student loan repayment program PLUS tuition reimbursement, medical/dental/vision, 401(k) with company match, paid time off and many more outstanding benefits!What You Will DoWork in a team, hands on, environment on capital and strategic projects for the Cleveland Operation production facilities.Responsible for the mechanical aspects of the projects including facilities preparation, equipment design and equipment installation.Work on engineering solutions to improve equipment reliability and safety, lower operational and maintenance costs, and improve ergonomics.Engineer solutions that comply with ISO 14001 and EHS initiatives to improve the environmental & employee health & safety.Interface with all engineering, manufacturing and maintenance departments along with R&D, QA, and Supply Management to ensure accuracy of project design target details.Provide technical support to Production and Maintenance departments.Work with and often manage outside engineering and construction personnel.Ensure all safety, health, environmental, and compliance aspects for the project meet the appropriate regulations.Additional responsibilities as assigned by managers within the Plant Engineering department.Performs engineering work in operations, production, construction or maintenance environmentsDesigns and scales up manufacturing processes, instruments and equipment and tests manufactured products to maintain quality.Plans, designs and estimates time and cost and oversees construction and maintenance of structures, facilities, systems and components.Analyzes and develops solutions to engineering problems related to manufacturing equipment and systems or the causes of component failures.Develops and applies engineering standards and procedures and provides advice on issues within the engineering field.Assumes additional responsibilities as needed or directed in support of the Company’s 2025 Strategy.Education & Experience RequirementsBachelor degree in Mechanical Engineering with minimum of 3+ years professional experience.Excellent organizational skills,written and oral communications skills.Must have good judgment, be self-motivated and be safety conscious.Strong desire to take ownership and drive results while effectively managinga variety of assignments and projects.Willing to perform hands on work as required and work effectively on the shop floor with employees and processes.Experiencehandling small to medium sized projects and day-to-day shop support.PreferredExperience with Solid Edge CAD modelling software is preferred.Knowledge of ISO 9001, ISO 14001, EPA and OSHA standards is preferred.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Maintenance Mechanic Career OpportunityEncompass Health Rehabilitation Hospital of Erie is seeking a full-time Maintenance Mechanic. Schedule includes primarily working Monday-Friday. Maintenance Mechanic will be in the on-call rotation during the week and weekend with the expectation to report to work after hours or weekends if needed. Pay range: $16.00-$25.00 per hour; on call pay Pay based on experience. Acknowledged for your proficiency as a Maintenance MechanicAre you a skilled Maintenance Mechanic seeking a career that combines your technical expertise with a sense of purpose Look no further! Encompass Health is looking for skilled Maintenance Mechanics seeking purposeful careers. Join us as a crucial member ensuring facility reliability and functionality, contributing to a workplace close to home and heart. Be the driving force behind maintenance, ensuring a secure environment for patients, visitors, and staff. Your role spans executing preventative maintenance, repairs, and tasks across hospital systems, including equipment, utilities, plumbing, electrical, HVAC, as well as light construction, painting, groundskeeping, security, and floor care. Ready to make a meaningful impact while leveraging your craft Explore this opportunity with us and help keep our operations running smoothly. A Glimpse into Our WorldAt Encompass Health, you'll experience the difference the moment you become a part of our team. Working with us means aligning with a rapidly growing national inpatient rehabilitation leader. We take pride in the growth opportunities we offer and how our team unites for the greater good of our patients. Our achievements include being named one of the "World's Most Admired Companies" and receiving the Fortune 100 Best Companies to Work For® Award, among other accolades, which is nothing short of amazing. Starting Perks and BenefitsAt Encompass Health, we are committed to creating a supportive, inclusive, and caring environment where you can thrive. From day one, you will have access to:Affordable medical, dental, and vision plans for both full-time and part-time employees and their families.Generous paid time off that accrues over time.Opportunities for tuition reimbursement and continuous education.Company-matching 401(k) and employee stock purchase plans.Flexible spending and health savings accounts.A vibrant community of individuals passionate about the work they do! Become the Maintenance Mechanic you always wanted to beSafely and effectively test and operate emergency power supply system (EPSS) and its components.nstall/maintain/repair mechanical, electrical, HVAC, pneumatic, oxygen, and telephone systems.Work independently in the specified time frame as assigned per job task under the direction of the supervisor.Retain auto, carpentry, phone, pneumatics, stationary engineer, hydraulics, and computer skills.Plan, interpret, examine, draw, and record work; report daily completion to supervisor.Perform all types of control maintenance, building construction and repair, and equipment overhaul within required time frame.Maintain a working knowledge of all facility systems and all applicable regulatory standards. QualificationsLicensing in a specialty field such as electrical, plumbing, or HVAC is preferred.Valid driver's license may be required.High school diploma or equivalent work experience preferred.Previous experience in preventative maintenance, equipment repair, HVAC, plumbing, electrical, and/or construction required. Healthcare experience is a plus.May be required to work weekdays and/or weekends, evenings and/or night shifts if needed.Ability to lift, lower, push, pull, and retrieve objects weighing a minimum of 50 pounds.Must demonstrate the ability to tolerate frequent position changes such as twisting, stooping, reaching, squatting, kneeling, pushing/pulling, and bending positions for complete shift.Ability to work on ladders and scaffolds and be able to sit, stand, and walk for momentary to extended periods of time.Ability to safely work with hazardous materials. The Encompass Health WayWe proudly set the standard in care by leading with empathy, doing what's right, focusing on the positive, and standing stronger together. Encompass Health is a trusted leader in post-acute care with over 150 nationwide locations and a team of 36,000 exceptional individuals and growing!At Encompass Health, we celebrate and welcome diversity in our inclusive culture. We provide equal employment opportunities regardless of race, ethnicity, gender, sexual orientation, gender identity or expression, religion, national origin, color, creed, age, mental or physical disability, or any other protected classification.We're eagerly looking forward to meeting you, and we genuinely mean that. Join us on this remarkable journey!

Charter Manufacturing is a fourth-generation family-owned business where our will to grow drives us to do it better. Join the team and become part of our family!$5000 Hiring BonusPOSITION PURPOSE/MISSION:Serve as a core component of the maintenance department and contribute to the success of the business operation. Success includes leading safety efforts to create a safe work environment, providing a Continuous Improvement mindset, and working well in a team environment. Perform preventative maintenance, troubleshoot, inspect, calibrate, install, and support equipment. Systems include hydraulic, pneumatic, lubrication, overhead traveling cranes, gearboxes, rolls, and power transmission. Support and work as a team with the Electrical Maintenance Technicians and perform additional duties as assigned. PHYSICAL REQUIREMENTS: Near constant standing with frequent walking and occasional sitting.Occasional below waist level work, climbing, balancing, carrying, reaching over 15” away from the body, reaching above shoulder, fine motor skills, use of forceful motion, and lifting up to 35 lbs.Minimal foot use, push/pull, and lifting up to 100 lbs.Ability to meet the physical requirements, with or without reasonable accommodation,as provided in detail in the Job Analysis Database.MINIMUM QUALIFICATIONS:High School Diploma or GED equivalent.Three plus years’ industrial maintenance experience or equivalent experience.Experience in machining, welding, hydraulics, pneumatics, lubrication, plumbing, power transmission (including bearings, gearing, conveyors, fans, shaft alignment, sprockets and couplings), basic electrical, blue print reading (including interpreting mechanical, pneumatic, and hydraulic schematics), overhead cranes and troubleshooting/repair.Experience and proficient use of maintenance equipment and tools including metal working, drill presses, saws, and grinders.Demonstrated industry standard rigging and lifting procedures.Ability to operate mobile equipment such as forklifts, pendant and overhead traveling cranes, and aerial lift platforms in a safe and professional manner.Ability to use a wide range of precision measuring tools including, but not limited to, micrometers and calipers.Ability to use technical manuals/catalogs to reference replacement parts.Demonstrated good housekeeping practices and 5S principles.Demonstrated ability to work in a team environment.Basic math skills.Good reading skills and basic communication skills.Ability to follow and give instructions.Good problem solving skills.Demonstrated commitment to safe working behaviors including lockout, fall protection, confined space, and mobile equipment operation.Proficient computer skills to receive/close work orders and use email.PREFERRED QUALIFICATIONS:Certificate of Completion of Apprenticeship, Journeyman Certification, or equivalent work experience.Welding experience (SMAW, MIG and/or TIG).Fabrication experience.Steel industry experience.Basic understanding of electrical drives.Strong communication skills.Safety awareness training.MAJOR ACCOUNTABILITIES:Troubleshoot and repair specific plant equipment.Analyze test results, machine error messages, and information obtained from operators to diagnose and perform repairs.Perform preventative maintenance (PM), troubleshooting, inspection, calibration, installation, and all necessary support of equipment.Support and work as a team with the Electrical Maintenance Technicians.Support parts inventory system accuracy.Create new parts with use of available machining centers.Perform miscellaneous plant duties as instructed by the supervisor.Follow and comply with all safety and work rules.Follow Environmental, Quality and Safety Management System procedures and requirements.Ability to meet the essential job requirements, with or without reasonable accommodation, as outlined in the job description.POSITION CHALLENGES:12 hour shift5-2-2-5 rotationMost positions start on night shiftAbility to work in various areas of the mill that include adverse environmental conditions such as dirt, grease, hot, cold, and extreme heights.#LI-Onsite#LI-ME1

JOB SUMMARY We are seeking a skilled and detail-oriented BAS Controls Service Technician to join our dynamic team in Northeast OH. In this role, you will be responsible for the installation, programming, troubleshooting, and maintenance of Building Automation Systems (BAS) and process automation controls. The ideal candidate will possess in-depth knowledge of HVAC systems, control systems, and networking, with a commitment to delivering exceptional service to our clients. KEY RESPONSIBILITIES Installation & Configuration Install, configure, and program BAS controllers, sensors, actuators, and related equipment. Integrate new and legacy systems, ensuring seamless interoperability with existing infrastructure. Programming & Commissioning Develop and modify control sequences of operations using BAS programming tools (e.g., Tridium Niagara, Siemens, Johnson Controls, Honeywell, or similar platforms). Commission systems to verify functionality, including point-to-point testing, calibration, and system optimization. Troubleshooting & Maintenance Diagnose and resolve system issues, including hardware, software, and network-related problems. Perform preventative maintenance and system updates to ensure optimal performance and compliance with client requirements. Client Interaction Communicate effectively with clients to understand their needs and provide technical support. Train end-users on BAS operation and provide ongoing support as required. Documentation & Reporting Create and maintain detailed documentation, including system schematics, programming changes, and service logs. Provide clear and timely reports to supervisors and clients regarding project status and service outcomes. REQUIRED SKILLS & EXPERIENCE Associate's degree or technical certification in HVAC, controls, electronics, or a related field (or equivalent work experience). 3+ years of hands-on experience with BAS or process automation systems. Proficiency with BAS platforms such as Tridium Niagara, Distech, ASI, Siemens Desigo, Honeywell, Johnson Controls Metasys and FX, or similar systems. Strong understanding of HVAC systems, electrical controls, and mechanical systems. Familiarity with communication protocols (e.g., BACnet, Modbus, LonWorks, etc.). Knowledge of IP networking, switches, and system integration. Ability to read and interpret electrical schematics, control diagrams, and mechanical drawings. PREFERRED SKILLS Certifications such as Niagara N4, Distech, Honeywell Spyder, Johnson Controls FX, or Siemens APOGEE are highly desirable. Experience with energy management and optimization strategies. Familiarity with industrial process automation, PLCs, and SCADA systems. Excellent problem-solving and critical-thinking abilities. Strong organizational and time-management skills. Effective verbal and written communication skills. Customer-focused attitude with the ability to build positive relationships.

Maintenance Mechanic If you would love to be part of a company that is poised for substantial growth with opportunities for career advancement, then working for CPP may be the right fit for you! Join a results-oriented workplace that strives for success through innovation, collaboration, and teamwork. Consolidated Precision Products (CPP) Euclid is an investment casting foundry that specializes in complex aerospace & gas turbine components. With a stable business model and competitive compensation & benefits, CPP is a great option to consider as you look to make your next career move. For more information, please visit https://www.cppcorp.com/ WHAT WE OFFER Weekly Pay for Hourly EmployeesComprehensive Benefit PlansQuarterly Bonus Opportunity401k with Company MatchEmphasis on Employee EngagementPaid Holidays and Vacation TimeTuition ReimbursementOpportunities for Advancement JOB SUMMARY Perform highly skilled maintenance tasks on state-of-the-art equipment. Job duties include troubleshooting and repairing foundry equipment using Standard to Advanced Maintenance skills. Documented electrical experience is desirable. Interact with the CMMS to perform regular scheduled preventative maintenance tasks. Other maintenance duties depending on company and departmental needs. PRIMARY RESPONSIBILITIES Review preventive maintenance schedule.Perform preventive maintenance per schedule.Communicate with Operators pre- and post-repair.Interact with Operators to troubleshoot, repair and test equipment.Communicate with Team Leader and/or Maintenance Supervisor on major repair needs discovered.Complete, sign and submit work orders.Complete safety checklist on all work.Complete order list of equipment and supplies to be ordered.Review new equipment standard issues.Follow lock-out, tag out procedures.Repair machines as needed.Attend annual RCRA training and other training as appropriate.Take out trash and clean up debris around the plant as necessary.Perform other duties as assigned by supervisor or management. QUALIFICATIONS Education: High school diploma is a minimum. Trade school or apprenticeship may be accepted.Certifications/Licenses: None required.Other Required Knowledge, Skills & Abilities: General knowledge of trades with 1-2yrs. experience in each. Skilled in use of standard mechanical hand tools. Good interpersonal skills. Good follow-up skills. Ability to troubleshoot plant equipment with supervision. Ability to operate mobile maintenance equipment: forklift, scissor lift, man lift. Ability to interact with a wide variety of people. Self-control. Persistence. Detail orientation. Curiosity about new products and processes. Good judgment. WORKING ENVIRONMENT Shop floorRequired PPE: Check for required PPE in areas you may be working inSafety Glasses: Needed in all areas of the plant.Steel toe shoes: Needed in all areas of the plant. NOTE: Consolidated Precision Products is an Equal Employment Opportunity Employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, age, disability, veteran status, genetic information, or any other characteristic protected under applicable law.It is the policy of the company to comply with all aspects of the Americans with Disabilities Act. Upon request, the company will provide reasonable accommodations to individuals with disabilities who need an accommodation to fully participate in the application process. All roles are restricted to U.S. persons (U.S. citizens, permanent residents and other protected individuals under the Immigration and Naturalization Act) due to access to export-controlled technology. CPP will require proof of status priorto employment.Note that we maintain a drug-free workplace, and all offers of employment will be contingent on satisfactory results of a drug & background screen. This is a full time position

Overview: At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation: Competitive pay from $30 to $45/hr. and sign-on bonuses up to $5,000 (per location).Ongoing Education & Training: Access to state-of-the-art facilities and paid online training.Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: The HVAC/R Technician role is primarily responsible for performing repairs and maintenance to a variety of HVAC and Refrigeration equipment including air conditioning, electric motors, heating units, heat pumps, hermetic compressors, commercial furnaces, boilers, burners, intake and exhaust fans, economizers and humidifiers, RTUs, remote condensing units, ice machines, walk-in coolers & freezers, and upright refrigerators & freezers. Qualifications: 3+ years of commercial experience as an HVAC and Refrigeration TechnicianActive EPA CertificationValid driver's licenseExcellent customer relations and interpersonal skillsMechanical aptitude and troubleshooting skillsAbility to safely lift to 50 lbs., climb and balance on a ladder, and work in elevated/high locations. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

310 Broadway Ave, Bedford, OH 44146AUTOMOTIVE TECHNICIAN Industry-Leading Pay – Up to $45 an Hour PLUS Bonuses! Earn $60,000 - $150,000+ a Year!State-of-the-Art Facility & Equipment!Ohio’s Largest Dealer Group – Ranked #14 in the Nation! Signing Bonus/Relocation Assistance!Ken Ganley Chrysler Dodge Jeep Ram of Bedfordis HIRING NOW for experiencedService Technicians to perform vehicle repairs and routine service/maintenance to our customers’ vehicles and commercial vans!Our high-volume work environment ensures consistent work for all of our techs year-round! We're redefining automotive excellence with a state-of-the-art facility, cutting-edge tools, and an unmatched commitment to our team’s success. If you're a driven and skilled technician, you deserve to work where your talents are valued and your hard work is rewarded.We offer continuous paid training/certification programs and a best-in-class compensation and benefits package, including top pay and benefits in our area.Apply online today!We offer:Industry-leading Pay up to $45 an hour!Tell us about your experience at your interview!Performance bonuses!Unlimited Earning Potential: Our techs can earn $60,000 - $150,000+ a year!Retention bonuses!Sign-on bonus and/or tool relocation for the right candidatesCutting-Edge Tools and Equipment:Work with the best tools and equipment in the industry to ensure you can perform your bestConsistent Workflow: Our high-volume shop ensures steady opportunities to earn year-roundKnowledgeable Service Advisors & a well-equipped, fully stocked Parts DepartmentFull certification training programVideo or phone interviewing to accommodate out-of-state/town applicantsWork/Life BalanceFull Family Benefits – Medical, Dental, Vision, and Life Insurance401(k) Retirement Plan with Company MatchGenerous paid vacation, holidays & sick timeEmployee discounts on products & servicesVehicle purchase plansStable work with growth and advancement opportunitiesResponsibilities - Service Technician:Inspect vehicle and diagnose the problem(s)Perform quality repair/maintenance work that meets dealership and manufacturer standards including engine, transmission, electrical, steering, suspension, braking, air conditioning, etc.Provide an estimate of time and parts needed for repair/maintenanceLearn new technical information and techniques in training sessions to stay current with rapidly changing technologyKeep shop neat and account for dealership-owned toolsOther duties may be assigned according to skill level and certificationQualifications - Service Technician:3+ years of previous experience as an auto technician is required5+ years of experience preferredWe welcome Technicians from ALL brands!Valid driver's license with an acceptable driving recordFlexible and focused on maintaining a high level of customer serviceGood work ethic and problem-solving skillsA positive attitude and works well as part of a teamPlease upload your resumeMust be authorized to work in the U.S. without sponsorship and be a current residentApplicants must pass pre-employment screeningWe are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment regardless of race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

BECOME A US FOODS® DRIVER!$12,000 Retention Bonus for qualified CDL-A DriversReady to build a career with a company that’s leading the foodservice industry We help YOU make it! Hourly pay $25.55Schedule: 3-6am dispatch time (10-12 hour shifts) 5 daysUS Foodsis one of the largest food distributors with a culture and history of promoting from within, excellent training programs and a continuous improvement focus.Main Ingredients of the Job Safely drive trucks to customers and meet scheduled customer delivery timesCarefully unload products from the trailer with a two-wheeler, pallet jack, or by hand and place in designated customer storage areasVerify accuracy of delivery with customers and obtain proper signaturesHandle collections and payments from customers when applicableProfessionally perform customer service responsibilities to enhance our client experiencePerform all pre-trip and post-trip equipment inspectionPhysical RequirementsAbility to lift/carry/push/pull 20 to 80+ lbs. of product repetitively during each shift requiredComfortable driving and working in inclement weather conditions with frequent stops (10+ per shift) requiredWhat You Bring to the TableRegister to the FMCSA Clearinghouse*Must be at least 21 years of ageMust have valid CDL Class A issued by the state of legal residence with necessary endorsements and DOT qualificationsMinimum of six months commercial driving experience (any industry) OR three months commercial driving experience in the food and/or beverage delivery industry requiredAbility to operate manual transmission preferred; may be required in specific locationsMust be able to read and communicate in the English language - able to hold a conversation, to understand highway traffic signs and signals, to respond to official inquiries, and to enter information on reports and records.Why US FoodsUS Foods® helps our customersMake It, with products and services that shape the communities where we live and work. Opportunities in our company abound for skilled, forward-thinking associates.Great drivers are crucial to the US Foods® team and one of the important faces of our organization. On and off the road, our drivers strive for integrity and reliability, while building trusting relationships with customers.At the foundation of those efforts are our cultural beliefs, the pillars that define our work ethic, collaborative spirit and service. Together we help our customers make it, but we also believe in helping our drivers make it!At US Foods®, we are committed to Total Rewards that respect and reward ourassociates for their dedication and hard work.*Registering to the FMCSA Clearinghouse is a requirement by the Department of Transportation. All Drivers are required to the Clearinghouse website and register to the new database. The Clearinghouse is a secure online database that provides real-time information about commercial driver’s license (CDL) and commercial learner’s permit (CLP) holders’ drug and alcohol program violations. If you have not registered to the FMCSA database, please note registration is required. Please visit https://clearinghouse.fmcsa.dot.gov/register and click GO to login. If you are able to log into login, but are having trouble with the Clearinghouse registration, see “Clearinghouse Help” field on the clearinghouse page.Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $25.55/hour and $28.55/hour.Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance.***EOERace/Color/Religion/Sex/SexualOrientation/Gender Identity/National Origin/Protected Veteran/Disability Status***