SEARCH
GO
Skilled & Trades Jobs
Full Time
11/11/2024
Columbus, OH 43223
(36.8 miles)
$16.00 / hr
RoadSafe Traffic Systems imageWe are looking for Flaggers to join our team!
The Flagger is responsible for directing the flow of traffic around construction sites, road maintenance areas, and other work zones. This role involves setting up and taking down traffic control signs, cones, and barricades to ensure the safety of workers and the public. The Flagger uses hand signals, signs, and other traffic control devices to communicate with motorists and guide them safely through or around the work area. The position requires excellent attention to detail, the ability to work outdoors in various weather conditions, and the capability to stand for extended periods.
Set up signs, cones, and other traffic control devices around work areas to divert traffic. Effectively manage traffic flow with stop/slow paddles. Maintain clear and effective communication with team members using two-way radios. Regularly required to stand and walk and reach with hands and arms for up to 10 hours a day. Ability to lift, carry, push, pull, and move items over 50 pounds. Drive company vehicles to transport traffic control equipment to and from job sites. Perform routine vehicle inspections and maintenance checks to ensure vehicles are in good working condition. Regularly exposed to outside weather conditions, moving equipment and machinery parts, moving traffic, fumes, and airborne particles. Noise level of the work environment is usually moderate to loud. Adhere to all Company Policies and Procedures. Perform other duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer
Requirements: Valid Driver’s License. Must pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Operate 2-way radio. Willingness to work in various weather conditions and traffic settings. Provide effective communication with contractors and internal teams while delivering the highest level of customer service. Work well in a team environment. Must have excellent attendance, reliable transportation, and a strong work ethic. Successfully complete the ATSSA Flagger training course and company-sponsored Defensive Driver training. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule.
We are an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.
Full Time
10/30/2024
Unionville Center, OH 43077
(16.2 miles)
Business Unit Description: Michael Foods, Inc. is a leader in the food processing and distribution industry with business in egg products, refrigerated grocery and potato products. We offer exciting job possibilities throughout our organization where you can enhance your career, sharpen your talents and make an impact. Join our company and be part of an innovative team that’s First in Food. Location Description: Michael Foods, Inc. located in the Village of West Jefferson, OH, is located just minutes from the western suburbs of Columbus and about 20 minutes to the west of downtown. We are proud to be Michael Foods’ most recent greenfield project, producing high quality protein shakes serving people all around the world. It’s our honor to continue our strong commitment to our employees, our community, and our environment. Responsibilities: SUMMARY: DAYS AND NIGHT SHIFT POSITION AVAILABLE. 6m-630pm or 6p-6:30a 2-2-3 SCHEDULELooking to Hire experienced electrical/E&I/Automation technicians for our West Jefferson location. Let us show you why we are first in food because we are first in people.This position has the responsibility to comply with safety work rules at all times as well as an obligation to reinforce safety as a core value. Ensures that all policies, procedures and activities, related to food safety & quality, are followed and complied with uniformly, in an effort to reduce product and process variability.The techincian position is responsible for ensuring the equipment productivity and efficiency through troubleshooting, preventive maintenance, corrective maintenance, and monitoring.Tetra Pak or Evergreen experience is highly desired!Automation, electro mechanical, electrical, or E&I experience is recommended.Compensation is above market average for locale. We offer relocation and other competitive benefits.#FirstinpeopleACITIVITIES: Assumes personal responsibility to insure a safe and healthy workplace for everyone. Adheres to all safety policies/procedures and incorporates safety and health in all job’s duties/tasks. Adheres to safe work practices, follows GMP’s, maintains sanitary conditions and ensures that product quality is maintained. Reports any conditions or practices that may adversely affect employee safety or food safety/quality to management immediately. Attends and actively participates in safety meetings/trainings.Ensures regulatory compliance at all times.Complete preventative maintenance requirements on all equipment.Monitor efficiency of all equipment and troubleshoot when necessary.Remove or replace defective parts by dismantling and reassembling equipment.Adjust all necessary components of equipment as needed.Repair and adjust all doors as needed.Must adhere to budget, USDA, OSHA, SQF, and FDA compliance guidelines.Perform other duties as assigned. Qualifications: EDUCATION: High school diploma or general education degree (GED) or equivalent.LANGUAGE SKILLS: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations.MATHEMATICAL SKILLS:Ability to add and subtract two-digit numbers and to multiply and divide with 10’s and 100’s. Ability to perform these operations using units of American money and weight measurement, volume and distance.REASONING ABILITY:Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.LICENSES, CERTIFICATES, REGISTRATIONS:Examples of licenses, certificates, and registrations required:Power Industrial Truck Operator’s LicenseBlack Seal License is a plus.OTHER SKILLS AND ABILITIES:Specific skills and abilities required that are not included in other sections:Ability to function in a teamwork environment.Must be well-organized.Must be detail oriented.Ability to plan and prioritize activity.Ability to comply with all safety rules and regulations.Basic computer skills.Ability to work safely with chemicals
Full Time
11/6/2024
Kenton, OH 43326
(21.6 miles)
An exciting career awaits youAt MPC, we’re committed to being a great place to work – one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment.MPL Electrical Reliability SupervisorThe Electrical Reliability Supervisor leads a team of specialists and engineers to implement MPL’s electrical maintenance and reliability processes. This position supports a wide variety of electrical equipment including but not limited to medium and low voltage power distribution equipment, motors, transformers, protection equipment, UPS systems, and equipment monitoring systems. The position provides leadership on maintenance and reliability scope ranging from day-to-day operational support to strategic improvements and projects.Key responsibilities include:1. Provides visible leadership in the application of MPL’s Operational Excellence Management System (OEMS) and Process Performance Assessments (PPAs) for continuous improvement of MPL Goals and Strategies associated with electrical equipment design and reliability.2. Interfaces with internal and external stakeholders including MPL Operating Regions, Operations and Logistics,Training, Environmental and Safety, L3S, Terminals, G&P and Refining.3. Provide updates on current status and path forward for equipment maintenance and breakdown activities to all applicable stakeholders, including the Reliability Engineering Manager.4. Creates a high-performing team environment. Provides feedback through day-to-day oversight and the performance review process to develop personnel.5. Ensures team receives adequate training and builds awareness of MPL and industry standards to develop expertise in areas of responsibility.6. Demonstrates strong commitment to teamwork, communication, collaboration, continuous improvement, and diversity/inclusion in-line with MPC and MPL values.7. Individually and through their team supports MPL day-to-day operations on equipment inspection, testing, preventative maintenance, and repairs. Actively participates on applicable Stop Help Start (SHS) calls.8. Provides key input regarding technician training and safety practices related to electrical equipment, maintenance, and reliability including MPL’s level III tasks and processes.9. Supports critical spare reviews for applicable in-service equipment and planned projects.10. Establishes preventative maintenance practices for electrical equipment.11. Develops reliability processes to evaluate equipment performance with a focus on condition-based maintenance and predictive analytics.12. Completes reliability failure analyses (RFAs) to understand equipment breakdowns and identify where improvement is needed to mitigate risk.13. Implements operational engineering practices to solve complex engineering problems which may span across multiple MPL departments and operating areas.14. Leverages Design Process to ensure MPL project solutions are efficient and effective. Supports asset construction and commissioning through field specialists and subject matter expert involvement.15. Reviews all MPL electrical equipment standards and advises on variance practices. Ensures Management of Change (MOC) reviews are completed for assigned processes.16. Provides oversight of assigned projects and financial responsibilities including support of capital and expense budget development, review and justification of new project PIFs, review of DSP/AFE’s, financial approvals and in-house projects.17. Builds and maintains contacts with vendors to ensure key technical and business relationships are in-place to support MPL operational needs. Applies relationships to identify emerging equipment trends which may benefit MPL.18. Represents MPL on external industry or regulatory activities related to role.19. Provides support for Growth projects including interfacing with Business Development on external commercial activities when applicable.Experience and requirements:Degree: Bachelor of Science in Engineering required, BSEE preferred.Location: Findlay, OHExperience: 7-10 years; familiarity with medium voltage systems/equipment, NEC and electrical safety practicesTravel: 0-20%#LS #mplAs an energy industry leader, our career opportunities fuel personal and professional growth.Location:Findlay, OhioAdditional locations:Job Requisition ID:00014126Location Address:539 S Main StEducation:Bachelors: Engineering (Required)Employee Group:Full timeEmployee Subgroup:RegularMarathon Petroleum Company LP is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, religion, creed, sex, gender (including pregnancy, childbirth, breastfeeding or related medical conditions), sexual orientation, gender identity, gender expression, reproductive health decision-making, age, mental or physical disability, medical condition or AIDS/HIV status, ancestry, national origin, genetic information, military, veteran status, marital status, citizenshipor any other status protected by applicable federal, state, or local laws.If you would like more information about your EEO rights as an applicant, click here.If you need a reasonable accommodation for any part of the application process at Marathon Petroleum LP, please contact our Human Resources Department at . Please specify the reasonable accommodation you are requesting, along with the job posting number in which you may be interested. A Human Resources representative will review your request and contact you to discuss a reasonable accommodation.Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401k matching program, paid parental leave, and educational reimbursement. Detailed benefit information is available athttps://mympcbenefits.com.The hired candidate will also be eligible for a discretionary company-sponsored annual bonus program.Equal Opportunity Employer: Veteran / DisabilityWe will consider all qualified Applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role.
Full Time
11/6/2024
East Liberty, OH 43319
(5.1 miles)
Equipment Service TechnicianLocation:East Liberty, OhioStarting Pay - $34.65 - $39.60 & $5,000 Sign on BonusWorkstyle - Onsite*Relocation assistance for candidates relocating over 50 miles*What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals.At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company which serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!About this Position:Equipment Service Technicians keeps equipment in good operating condition through effective preventative maintenance and equipment repairs. Effectively communicate technical issues with the equipment service and production teams and maintains equipment data and documentation daily.Responsibilities include:Repairing, maintaining equipment and supporting daily production.Responding to breakdowns and calls to keep production running.Supporting weekendmaintenancerepair and PM activities when necessary.Supporting a reliability centered maintenance program.Supporting team activities and contributing your own ideas.Who we are seeking:Required Work Experience:A minimum of three months of relevant experience in a manufacturing environment with a 2 year technical degree.Or a minimum of two years of relevant experience, if no degree.Required Education:High School Diploma or equivalent.Desired skills:Daily reporting and tracking of activities.Plan, Do, Check, Action follow up items.Immediate response to production floor needs and requirements.Compliance with all safety policies and regulations.Able to communicate clearly in verbal and written format.Basic knowledge of Microsoft products.Ability to be flexible and change work hours as needed.Able to analyze problems and determine root causes.Strong self-direction and drive.Capability to develop a high level a high level of expertise/aptitude in mechanical and electrical areas.Experience with Motoman robots.Experience with Omron PLCs.Additional Position Factors:Equipment inspections.Daily reporting and tracking of activities.Preventative maintenance.Continuous improvement.Other Job Specific Skills:Flexibility to work 2ndor 3rdshift long term.Flexibility to work weekends, holidays, daily overtime and off shifts as needed.Willingness to travel (percentage of travel varies between roles).Total RewardsCompetitive total compensation$5,000 Sign-on BonusHourly rate starting between $33.65- $38.451.5 OvertimeAnnual Profit Sharing Bonus OpportunityShift Premium for 2nd and 3rd shifts401k Plan with company contributionsFlexible and valuable insurance plansRelocation assistance (if relocating 50+ miles)Development to further your careerDiscount on Honda productsPaid time off and paid holidaysTo be eligible for a signing bonus, the applicant must not have been previously employed by Honda as a fulltime associate.Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.
Full Time
11/6/2024
Marysville, OH 43040
(8.8 miles)
What Makes a Honda, is Who makes a HondaHondahas a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals.At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Location: Marysville, OhioWorkstyle: OnsiteWage: $34.65 - $39.60$5,000 sign on bonus & Relocation assistance outside 50miles.About this Position: This position is within the Facilities department within Honda Development & Manufacturing of America, LLC’s (HDMA). The Facilities department is responsible for the building which includes new construction, remodels, utility management (electric, compressed air, natural gas, water), building maintenance, end of life equipment replacements and upgrades. The goal of the department is to create a facility that we are proud of and serve our customers.Role Description:Work on a team to perform facilities equipment preventative maintenance, repairs, improvements, and reporting, to maintain a high level of customer service in building, equipment, and utility operations. Continuously develop associate skills through Honda maintenance training program and find ways of introducing technologies and efficiency improvements.Responsibilities include:Complete preventative maintenance and repairs on equipment and systems (e.g., mechanical, electrical, HVAC, and building controls). Perform daily assigned work order tasks and communicate any follow-up neededEvaluates and recommends equipment improvements to improve availability, capability, and yield. Suggest and revise PM's to properly maintain facilities equipmentPerforms equipment failure analysis (including preventative and unscheduled maintenance). Troubleshoots and diagnose equipment problems. Participate in a reliability centered maintenance program for equipment. Participate in team activities to develop and maintain long term equipment reliability. Support total equipment management through daily and proactive activities to improve operations, promoting business targets and objectives.Provide mentorship and teambuilding through work habits, communication and the sharing of knowledge and expertise. Expand and maintain technical expertise through formal and on-the-job training opportunities. Support and engage in activities that drive new ideas, leveraging new technology, new methods and approaches to positively impact HAM’s competitiveness.Who we are seeking: Required Work Experience:Desired: 3 years of experience in a Facilities environment (industrial, or heavy commercial)Will consider well qualified entry level candidates Required Education:Completion of 2 year technical degree or equivalent equipment service experienceDesired skills:Working knowledge of Facilities low and medium voltage electrical equipment (including substations, switches, cable, starters, VFDs, MCC, breakers, bus duct) and Building Management Systems.Ability to troubleshoot mechanical equipment, such as HVAC, Refrigeration, Air Compressors, Air Dryers, Boilers, Cooling Towers, Pumps, Plumbing & Piping.Good written and verbal communication skills with the ability to clearly express ideasComply with Honda Health and Safety PoliciesMinimum computer (Word, PowerPoint, Excel) Self-motivated, creative thinking, and a positive attitude, continuous improvement and customer service drivenMust use time effectively & prevent irrelevant issues or distractions from interfering with work completion.Demonstrate the ability to plan/prioritize work assignments, submit schedules, set clear milestones & completion dates.Demonstrate the ability to collect & analyze pertinent data, identify root cause, and develop effective countermeasures.Additional Position Factors:Workstyle: OnsiteTravel: 5% At Honda, you will play a key role in our journey to become a company that society wants to exist now, and in the future. Your endless curiosity will drive innovation and your courageous spirit will challenge the status quo. We believe having a workforce made up of diverse thinkers and innovators makes us a better Honda. Respect for each other and respect for diversity each and every day drives our associates to contribute at the highest level and work effectively in a team environment. We make the dream of mobility a reality with our innovative and high-quality products. Together, we Bring the Future to our customers, associates, and communities. We are Honda!What differentiates Honda and make us an employer of choice Total Rewards:Competitive base salary Annual BonusIndustry leading Benefit Plans (Medical, Dental, Vision)Paid time off, including vacation, paid holidays, sick time, personal days401K Plan with company match + additional contributionRelocation assistance (if eligible)Career Growth:Advancement opportunitiesCareer mobility Education reimbursement for continued learningTraining and Development programs Additional Offerings:Wellbeing programCommunity service and engagement programsProduct programsFree drinks onsiteTo be eligible for a signing bonus, the applicant must not have been previously employed by Honda as a fulltime associate.Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.
Full Time
10/23/2024
Upper Sandusky, OH 43351
(34.8 miles)
Req ID:449219Address: 1301 N Warpole St Upper Sandusky, OH, 43351Benefits: * Fuel Your Growth with Love's - company funded tuition assistance program* Paid Time Off * Flexible Scheduling * 401(k) – 100% match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Hiring Immediately Welcome to Love’s!Diesel Technicians work in a fast-paced environment and maintain clean places with friendly faces. You will interact with customers & drivers from all over, making their travels and their day better. Job Functions: Troubleshoot and repair light mechanical issues that may include wheel-end assemblies, electrical systems, suspensions, A/C, or engine componentsAssist customers with roadside servicesProvide preventative maintenance servicesAbility to move, lift 75+ pounds working in close quarters. Ability to work in various temperatures.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Work a rotating schedule that alternates between day and night as needed.Ability to obtain a medical card through the Department of Transportation. (paid by Love’s) Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer. Veterans encouraged to apply.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.
Full Time
11/6/2024
Amlin, OH 43002
(25.2 miles)
Flexible 1st shift hours available What You'll Do: Analyze, troubleshoot, and repair electronic equipment Troubleshoot at the component level, resolve integration issues Perform circuit analysis, waveform calculations, fault isolation, prom programming, and signal flow tracing Utilize knowledge of electronics and digital components Apply skills in electronic fundamentals and logic Read and interpret schematics and blueprints Perform through hole and surface soldering Operate and interpret measurements from multi meters, oscilloscopes, and signal generators-analyzers Troubleshoot electronics devices at the board level What We're Looking For: High School Diploma required Ability to read and interpret technical documents accurately Strong troubleshooting skills and fault isolation Ability to work independently Familiarity with clean room environments and ESD protection preferred A+ and IPC certifications preferred Willingness to work occasional non-standard hours or overtime Key SkillsWhat's In It For You Elective Benefits: Our programs are tailored to your country to best accommodate your lifestyle.Grow Your Career: Accelerate your path to success (and keep up with the future) with formal programs on leadership and professional development, and many more on-demand courses.Elevate Your Personal Well-Being: Boost your financial, physical, and mental well-being through seminars, events, and our global Life Empowerment Assistance Program.Diversity, Equity & Inclusion: It's not just a phrase to us; valuing every voice is how we succeed. Join us in celebrating our global diversity through inclusive education, meaningful peer-to-peer conversations, and equitable growth and development opportunities.Make the Most of our Global Organization: Network with other new co-workers within your first 30 days through our onboarding program.Connect with Your Community: Participate in internal, peer-led inclusive communities and activities, including business resource groups, local volunteering events, and more environmental and social initiatives.Don't meet every single requirement Apply anyway. At Shyft Global Services, a TD SYNNEX Company, we're proud to be recognized as a great place to work and a leader in the promotion and practice of diversity, equity and inclusion. If you're excited about working for our company and believe you're a good fit for this role, we encourage you to apply. You may be exactly the person we're looking for!We are an equal opportunity employer and committed to building a team that represents and empowers a variety of backgrounds, perspectives, and skills. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, gender, gender identity or expression, sexual orientation, protected veteran status, disability, genetics, age, or any other characteristic protected by law.
Full Time
11/6/2024
Lockbourne, OH 43137
(45.0 miles)
Paid Time Off · Health Benefits Day One · 401K Match · No Travel At Bath & Body Works, everyone belongs. We are committed to creating a diverse, equitable and inclusive culture focused on delivering exceptional fragrances and experiences to our customers. We focus on recruiting, retaining, and advancing diverse talent where our associate population is as diverse as the communities we serve, live and work. In addition, we work to improve our communities and our planet in a way that will make us proud for years to come because we believe the world is a brighter, happier place when everyone has access to the things that make them happy.Summary The Maintenance Technician can perform a wide variety of work to ensure that the facilities and equipment are maintained in safe and effective working conditions. Responsibilities include but are not limited to, performing work in all operational and Facilities areas, depending upon the immediate needs of the department. While Maintenance Technicians may have developed skills in one or more areas, all are expected to be able to perform general maintenance and repair in all areas of assignment, which may include equipment, motor, and conveyor repair and maintenance as well as building maintenance including lighting, electrical, and plumbing in any of the distribution centers. Responsibilities Ability to read and comprehend technical manuals, schematics, and blueprintsAbility to use electrical diagnostic equipment (to include digital and analog meters, and amp meters for AC/DC testing)Ability to work as a team member by interacting and communicating with co-workers and managers in a collaborative and constructive mannerWorks with Supervisor to mentor/develop team and Tech’s in trainingWork with Vendors aligned to facilitiesAbility to multi-taskAbility to change load wheels on power equipmentAbility to troubleshoot and repair low and high voltage controls including fuses, relays, wiringMaintains building, equipment, shop, and storage areas in a clean and orderly conditionCompletes work orders for work performed and includes parts and inventory usedDocument all work order activities to comply with MP2 requirements, providing documented records of the activities performedFollow lockout-tag-out procedures, confined space procedures, and other safety and environmental procedures and policies as requiredExperience working in maintenance in a distribution center settingBuilding conveyor maintenance experience requiredQualifications & Experience Possession of a valid driver’s license and a satisfactory driving record.Prior maintenance experience with forklifts, conveyors, controls, hydraulics, pneumatics and building maintenance.Electrical experience with high and low voltage, AC and DC.Technical school or training desired.Computer skills navigating email/Microsoft SuiteKnowledge of mechanical and electrical drawings.Proven track record of strong mechanical and electrical troubleshooting.Welding skill preferred, but not required.Multiple shifts and locations available Education Possession of a high school diploma or general equivalency diploma (GED) Core Competencies Lead with Curiosity & HumilityBuild High-Performing Teams for Today & TomorrowInfluence & Inspire with Vision & PurposeObserve, Engage & ConnectStrive to Achieve Operational ExcellenceDeliver Business ResultsBenefits We invite you to join Gingham Nation, where we invest in our associates through competitive compensation, benefits, and development opportunities, so they can continue to be their best at work, at home, and in their communities. Benefits offered to our eligible associates include a no cost mental health and well-being program, health coverage with a variety of plans to choose from, flexible and affordable saving programs, paid time off and a merchandise discount. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required. We are an equal opportunity and affirmative action employer. We do not make employment decisions based on an individual’s race, color, religion, gender, gender identity, national origin, citizenship, age, disability, sexual orientation, marital status, pregnancy, genetic information, protected veteran status or any other legally protected status, and we comply with all laws concerning nondiscriminatory employment practices. We are committed to providing reasonable accommodations for associates and job applicants with disabilities. Our management team is dedicated to ensuring fulfillment of this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, associate activities and general treatment during employment. We only hire individuals authorized for employment in the United States. Application window will close when all role(s) are filled.
Full Time
11/10/2024
Marysville, OH 43040
(8.8 miles)
POSITION PURPOSE The position of Plumber I is critical to learning the plumbing trade and steadily improving both quality and speed over time. DUTIES, TASKS, AND RESPONSIBILITIES Studiously learn the necessary aspects of drain, waste, vent (DWV), water systems, and other aspects including but not limited to setting of tubs and installation of plumbing fittings and fixtures.Accurately build and install complete plumbing systems showcasing a clear understanding of all types of plumbing fittings.Ensure adherence to safety and quality of work standards.Deliberately manage materials needed for various projects.Steadily accumulate knowledge of basic tools required for plumbing work (soldering, cutting, and notching) and be able to put that knowledge into use within thirty (30) days.Precisely and regularly maintain a clean and organized job site.Thoughtfully follow directions and processes given by site leadership.Enthusiastically motivated to learn the plumbing trade.Maintain compliance with state trade licensing programs.Build knowledge of Plumbing Code.Maintain excellent attendance and punctuality to adhere to work schedule. CRITICAL SKILLS & KNOWLEDGE Motivated work ethic.Clear verbal communication skills.Basic mathematical ability including addition, subtraction, multiplication, and division.Ability to read, write, and interpret reports and documents such as safety rules, operating instructions, procedure manuals, and blueprints / CAD drawings.Critical thinking skills and ability to problem solve independently.A high school diploma or GED is required.Obtain apprentice licensing in appropriate states. WORKING CONDITIONS Exposure to outdoor weather conditions including rain, humidity, snow, wind, cold, and heat.The environment may include very loud noises, working near mechanical and moving parts, working at various heights, and small, awkward, confining workspaces.There is the possibility of inhalation of fumes and airborne particles as well as the risk of electrical shock and vibrations.Must be able to do the following activities for most of the workday: stand, walk, use hands or fingers, handle or feel, reach with hands and arms, stoop, kneel, crouch or crawl, see, talk, and hear.Must be able to climb or balance regularly.Near constant lifting or carrying of items of various weights, typically up to 10 pounds most of the day. Capable of lifting at least 50 pounds on occasion.Manual dexterity is sufficient to reach/handle items, work with the fingers, and perceive attributes of objects and materials.Wear job site-specific personal protective equipment and be able to lift at least 50 pounds.Possible travel to out-of-town/out-of-state projects This job description in no way states or implies that these are the only activities to be performed by the associate occupying this position. Associates will be required to follow any other job-related instructions and to perform any other job-related responsibilities requested by their supervisor.EducationRequiredHigh School or betterLicenses & CertificationsRequiredValid Driver's License
Full Time
11/7/2024
Columbus, OH 43224
(34.4 miles)
Securitas Technology Corportion, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services.Wecurrently have an Embedded Installation Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on our products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed.ResponsibilitiesServices intrusion, fire, CCTV, and access control security systems.Performs scheduled, routing preventive maintenance on a variety of equipment/systems under contract agreement by inspecting, adjusting, cleaning, and calibrating systems and checking out equipment to ensure it’s in satisfactory working order.Completes maintenance, within assigned hours, in a manner that reduces emergency calls and results in achieving the goal of zero call backs.Assists with the start-up of new equipment or system installation and adjusts as needed to ensure the system is operationalMay plan schedules, lay out basic electrical equipment installations, and assist in the start-up and check-out of new systems installationsPresents a professional image both in personal and vehicle appearance.Performs work assignments in a safe manner and within specified cost limits.Promotes, builds, and maintains good customer relations and assists with contract retention.Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements.Keeps abreast of changes and new developments in products and technology.Attends and completes training programs as requested.Minimum Requirements MUST HOLD a minimum of 1-2 years of experience installing and/or servicing intrusion, fire alarm, access control, and CCTV security systems.High School Diploma or equivalentVocational/Technical Degree in electrical, security, or computer systems preferredA thorough knowledge and understanding of intrusion detection systems, electronic access control, CCTV, IP video, Surveillance systems, fir alarm and life safety systemsNICET Certification preferredLenel, Pro-Watch, Software House, Picture Perfect certifications preferredBosch, Honeywell, Radionics, or DMP system knowledge preferredWorking knowledge IP addressing equipmentClimb ladders that extend up to 24 ft. in heightCarry items up to 75 poundsAbility to work on-call on a rotational basis covering after hours & weekend emergency calls.A valid state driver’s license, without restrictions, is required.Securitas offers comprehensive benefits including:Highly competitive salaryCompany VehicleCompany Cell PhoneOpportunity for annual merit pay increases.Paid company trainingMedical, Dental, Vision, and Life InsuranceCompany Paid Short Term and Long-Term Disability401K with 60% Match up to 6% of salaryPaid vacation, holiday, and sick timeEducational AssistanceExceptional growth opportunitiesWide variety of employee discounts on travel, equipment, and more!We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.
Full Time
10/29/2024
Unionville Center, OH 43077
(16.2 miles)
Business Unit Overview: Michael Foods, Inc. is a leader in the food processing and distribution industry with business in egg products, refrigerated grocery and potato products. We offer exciting job possibilities throughout our organization where you can enhance your career, sharpen your talents and make an impact. Join our company and be part of an innovative team that’s First in Food. Location Description: Michael Foods, Inc. located in the Village of West Jefferson, OH, is located just minutes from the western suburbs of Columbus and about 20 minutes to the west of downtown. We are proud to be Michael Foods’ most recent greenfield project, producing high quality protein shakes serving people all around the world. It’s our honor to continue our strong commitment to our employees, our community, and our environment. Responsibilities: This position is responsible for the management, training, scheduling and development of maintenance personnel providing support to the Production/Processing areas at the West Jefferson, OH facility. This newly constructed facility will produce protein drinks.Tetra Pak and Aseptic Equipment PreferredAssumes personal responsibility to insure safe and healthy workplace for everyone. Adhere to all safety policies and procedures and, incorporate safety and health in all jobs and tasks.Supervision of maintenance crew.Production support in the Production / Processing areas.Creates work orders and PMs.Responsible for installing new equipment.Troubleshoots problems with equipment.Provides a safe work environment for employees.Recognizes and takes steps to resolve operating problems in order to minimize their impact on the operations.Cooperates with all departments to assure a coordinated work relationship exists at all times.Keeps accurate and up-to-date records (I.E. timecards, downtime records, absentee records, etc.)Enforces company policies in a fair and consistent manner.Encourages suggestions from employees which will improve production, quality, safety and/or control costs of production.Keeps manager informed on operating and/or employee problems which may require their attention or knowledge.Adhere to safe work practices, follow GMP’s, maintain sanitary conditions and ensure that product quality is maintained.Report to management any conditions or practices that may adversely affect food safety, food quality or personnel safety.Responsible for Food Safety and Food Quality of MFI products.#firstinpeople Qualifications: Associate’s degree (AA) or two-year technical certificate in Mechanics and Electronics or a related field Two years of mechanical and electrical maintenance and supervisory experience; or an equivalent combination of education and experience sufficient to successfully perform the essential duties of the job such as those listed above.PREFERRED EDUCATION, EXPERIENCE AND SKILLS: Knowledge and experience supporting Aseptic filling operations. Tetra Pak experience a plus.Knowledge of basic mechanics, welding, electrical, fabrication, preventative maintenance, plant operations and government safety regulations.Able to supervise department personnel in a fair and consistent manner.Be able to recognize problem situations and take appropriate steps to resolve.Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information in one-on-one and in group situations. Ability to respond to questions from internal/external customers/vendors at all levels including management.Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables
Full Time
11/6/2024
Marysville, OH 43040
(8.8 miles)
Equipment Service TechnicianLocation:Marysville Auto Plant in OhioStarting Pay - $34.65 - $39.60 & $5,000 Sign on BonusWorkstyle - Onsite*Relocation assistance for candidates relocating over 50 miles*What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals.At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company which serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!About this Position:Equipment Service Technicians keeps equipment in good operating condition through effective preventative maintenance and equipment repairs. Effectively communicate technical issues with the equipment service and production teams and maintains equipment data and documentation daily.Responsibilities include:Repairing, maintaining equipment and supporting daily production.Responding to breakdowns and calls to keep production running.Supporting weekendmaintenancerepair and PM activities when necessary.Supporting a reliability centered maintenance program.Supporting team activities and contributing your own ideas.Who we are seeking:Required Work Experience:A minimum of three months of relevant experience in a manufacturing environment with a 2 year technical degree.Or a minimum of two years of relevant experience, if no degree.Required Education:High School Diploma or equivalent.Desired skills:Daily reporting and tracking of activities.Plan, Do, Check, Action follow up items.Immediate response to production floor needs and requirements.Compliance with all safety policies and regulations.Able to communicate clearly in verbal and written format.Basic knowledge of Microsoft products.Ability to be flexible and change work hours as needed.Able to analyze problems and determine root causes.Strong self-direction and drive.Capability to develop a high level a high level of expertise/aptitude in mechanical and electrical areas.Experience with Motoman robots.Experience with Omron PLCs.Additional Position Factors:Equipment inspections.Daily reporting and tracking of activities.Preventative maintenance.Continuous improvement.Other Job Specific Skills:Flexibility to work 2ndor 3rdshift long term.Flexibility to work weekends, holidays, daily overtime and off shifts as needed.Willingness to travel (percentage of travel varies between roles).Total RewardsCompetitive total compensation$5,000 Sign-on BonusHourly rate starting between $33.65- $38.451.5 OvertimeAnnual Profit Sharing Bonus OpportunityShift Premium for 2nd and 3rd shifts401k Plan with company contributionsFlexible and valuable insurance plansRelocation assistance (if relocating 50+ miles)Development to further your careerDiscount on Honda productsPaid time off and paid holidaysTo be eligible for a signing bonus, the applicant must not have been previously employed by Honda as a fulltime associate.Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.
Full Time
11/6/2024
Anna, OH 45302
(37.7 miles)
Equipment Service TechnicianLocation:Anna, OhioStarting Pay - $34.65 - $39.60 & $5,000 Sign on BonusWorkstyle - Onsite*Relocation assistance for candidates relocating over 50 miles*What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals.At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company which serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!About this Position: An Equipment Service Technician at HDMA maintains, repairs, and implements improvements to various types of manufacturing equipment which allows the manufacturing areas achieve their safety, quality, and production targets.Responsibilities include:Respond to equipment emergency downtime, troubleshoot for the root cause of the failure, and repair as needed in a timely mannerPerform preventive maintenance activity both during production and non-production timeDocument daily activity in the Computerized Maintenance Management System (Maximo)Support weekend maintenance activityComplete assigned work orders when not responding to emergency downtimeSupport scheduled maintenance activity during plant shutdownsAttend all required training as well as self-develop skillsSupport any equipment installations, removal, and demo as requiredWho we are seeking:Required Work Experience:A minimum of three months of relevant experience in a manufacturing environment with a 2 year technical degree.Or a minimum of two years of relevant experience, if no degree.Required Education:High School Diploma or equivalent.Desired skills:Multi-craft technical skills: Electrical, mechanical, automation, PLC logic, robotics, CNC, hydraulics, pneumatics, and general maintenanceAbility to read and understand various technical drawings & blueprintsEffective time management skillsAbility to communicate with Production, Engineering, and other ES associates.General computer skillsOther Job Specific Skills:Manufacturing environment: coolant, grease, oil, noise5-8 hours weekly overtime average – mainly on weekendsWilling to work weekends, holidays and plant shutdowns as requiredWilling to work any shift (First, Second, or Third)Minimal potential travel for training and/or equipment reviewsTotal RewardsCompetitive total compensation$5,000 Sign-on Bonus1.5 OvertimeAnnual Profit Sharing Bonus OpportunityShift Premium for 2nd and 3rd shifts401k Plan with company contributionsFlexible and valuable insurance plansRelocation assistance (if relocating 50+ miles)Development to further your careerDiscount on Honda productsPaid time off and paid holidaysTo be eligible for a signing bonus, the applicant must not have been previously employed by Honda as a fulltime associate.Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.
Full Time
10/23/2024
Obetz, OH 43137
(45.0 miles)
Req ID:449266Address: 6023 Alum Creek Drive Obetz, OH, 43137Benefits:* Fuel Your Growth with Love's - company funded tuition assistance program * Paid Time Off * Flexible Scheduling * 401(k) – 100% match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Hiring Immediately Welcome to Love’s!Diesel Apprentices work in a fast-paced environment and maintain clean places with friendly faces. You will interact with customers & drivers from all over, making their travels and their day better. Are you mechanically inclined with no professional experience No problem! We will teach you! In the apprentice program, you can expect to learn:Electrical diagnostics and repairsAir conditioning & heating diagnostics and repairsWheel end assembly diagnostics and repairsAir system diagnostics and repairsAir brakes diagnostics and repairsCharging system diagnostics and repairsBasic computer diagnostics and auxiliary component replacementParts lookup and acquisition Job Functions: Assist customers with roadside servicesLearn preventative maintenance servicesAbility to move, lift 75+ pounds working in close quarters. Ability to work in various temperatures.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Work a rotating schedule that alternates between day and night as needed.Ability to obtain a medical card through the Department of Transportation. (paid by Love’s) Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer. Veterans encouraged to apply.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.
Full Time
11/7/2024
Marysville, OH 43041
(7.0 miles)
KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment
Full Time
11/7/2024
Columbus, OH 43224
(34.4 miles)
Securitas Technology Corportion, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services.Wecurrently have an Embedded Installation Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on our products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed.ResponsibilitiesServices intrusion, fire, CCTV, and access control security systems.Performs scheduled, routing preventive maintenance on a variety of equipment/systems under contract agreement by inspecting, adjusting, cleaning, and calibrating systems and checking out equipment to ensure it’s in satisfactory working order.Completes maintenance, within assigned hours, in a manner that reduces emergency calls and results in achieving the goal of zero call backs.Assists with the start-up of new equipment or system installation and adjusts as needed to ensure the system is operationalMay plan schedules, lay out basic electrical equipment installations, and assist in the start-up and check-out of new systems installationsPresents a professional image both in personal and vehicle appearance.Performs work assignments in a safe manner and within specified cost limits.Promotes, builds, and maintains good customer relations and assists with contract retention.Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements.Keeps abreast of changes and new developments in products and technology.Attends and completes training programs as requested.Minimum Requirements MUST HOLD a minimum of 1-2 years of experience installing and/or servicing intrusion, fire alarm, access control, and CCTV security systems.High School Diploma or equivalentVocational/Technical Degree in electrical, security, or computer systems preferredA thorough knowledge and understanding of intrusion detection systems, electronic access control, CCTV, IP video, Surveillance systems, fir alarm and life safety systemsNICET Certification preferredLenel, Pro-Watch, Software House, Picture Perfect certifications preferredBosch, Honeywell, Radionics, or DMP system knowledge preferredWorking knowledge IP addressing equipmentClimb ladders that extend up to 24 ft. in heightCarry items up to 75 poundsAbility to work on-call on a rotational basis covering after hours & weekend emergency calls.A valid state driver’s license, without restrictions, is required.Securitas offers comprehensive benefits including:Highly competitive salaryCompany VehicleCompany Cell PhoneOpportunity for annual merit pay increases.Paid company trainingMedical, Dental, Vision, and Life InsuranceCompany Paid Short Term and Long-Term Disability401K with 60% Match up to 6% of salaryPaid vacation, holiday, and sick timeEducational AssistanceExceptional growth opportunitiesWide variety of employee discounts on travel, equipment, and more!We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.
Full Time
11/6/2024
Marysville, OH 43040
(8.8 miles)
Equipment Service Technician - VQDLocation:Marysville, OhioStarting Pay - $34.65 - $39.60 & $5,000 Sign on BonusWorkstyle - Onsite*Relocation assistance for candidates relocating over 50 miles*What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals.At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company which serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!About this Position:Equipment Service Technician responsible for maintaining of equipment. This includes responding to equipment emergency downtime, troubleshooting for root cause and repair as needed.Responsibilities include:Ability to troubleshoot and repair: Robots, Servo Systems, Electrical Systems, Automated Machinery and Mechanical SystemsInterpret electrical, mechanical, and hydraulic prints.Complete assigned work orders and support production members in achieving the lines run rate efficiency.Document daily (all) activity and information in Equipment Management Systems (Maximo)Support weekend preventative maintenance, repair, and plant shutdown activities as well as new equipment installations and equipment modificationsWho we are seeking:Required Work Experience:Preferred 3 months of relevant experience.Required Education:High School Diploma or Equivalent. Two-year degree (Electrical/Mechanical/Industrial) or equivalent equipment maintenance experienceDesired skills:Problem analysis skills, Robots, Servo Systems, Electrical Systems, Automated Machinery and Mechanical Systems, knowledge of Microsoft Office (Excel, Power Point, Word). Time managementAdditional Position Factors:Department Equipment Run TimeDepartment Delivery Run RateEfficiency AchievementPreventative Maintenance On-time CompletionOther Job Specific Skills:Flexibility to work 2ndor 3rdshift long term.Flexibility to work weekends, holidays, daily overtime and off shifts as needed.Willingness to travel (percentage of travel varies between roles).Total RewardsCompetitive total compensation1.5 OvertimeAnnual Profit Sharing Bonus OpportunityShift Premium for 2nd and 3rd shifts401k Plan with company contributionsFlexible and valuable insurance plansRelocation assistance (if relocating 50+ miles)Development to further your careerDiscount on Honda productsPaid time off and paid holidaysHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.
Full Time
11/15/2024
Unionville Center, OH 43077
(16.2 miles)
Business Unit Overview: Michael Foods, Inc. is a leader in the food processing and distribution industry with business in egg products, refrigerated grocery and potato products. We offer exciting job possibilities throughout our organization where you can enhance your career, sharpen your talents and make an impact. Join our company and be part of an innovative team that’s First in Food. Location Description: Michael Foods, Inc. located in the Village of West Jefferson, OH, is located just minutes from the western suburbs of Columbus and about 20 minutes to the west of downtown. We are proud to be Michael Foods’ most recent greenfield project, producing high quality protein shakes serving people all around the world. It’s our honor to continue our strong commitment to our employees, our community, and our environment. Responsibilities: Great opportunity to serve as a member of the site leadership team for the opening of our newly constructed manufacturing facility in The Village of West Jefferson, OH. Michael Foods, Inc., as an industry leader we are First In Food because we are First in People.This greenfield site will operate as a co-manufacturer of protein drinks.The Maintenance Manager is accountable for leading and directing all reliability and maintenance activities, utilities operation and execution of capital plan as necessary. The Maintenance Manager will ensure successful completion of daily maintenance work as scheduled by the planning team and its execution by partnering with operational and support team members. This role must be available to work on scheduled work times, weekends and holidays as needed.This is a brand new facility that is seeking a Maintenance Leader to shape and drive Maintenance Initiatives and Processes that will elevate MFI goals and production. Some of the responsibilities are:Responsible for plant maintenance including facilities, utilities, and operations to reduce downtime and assure peak plant efficiencies. Will partner or direct capital engineering design and projects to completion and work with appropriate vendors. Lead department team members to ensure quality, delivery and cost are continuously being improved to achieve company objectives. Engage and develop the asset care teams at each facility to deliver expected levels of reliability. As part of the greater leadership team, be an active member who contributes to the advancement of the culture. Direct responsibility for the maintenance team and their performance. Responsible for all maintenance department metrics. Ability to balance maintenance (tactical and strategic) initiatives that align with plant business strategies.Assists with planning and cost estimates for annual and longer-term capital and operating budgets to deliver to business plan. Responsible for executing the capital plan to include all engineering design and project management, working with both internal and external resources. Ability to coordinate and deliver multiple projects at the same time safely and efficiently. Establish criteria for assessing the quality of work performed by employees and contractors.Supervise the completion of work through review of reports and frequent site inspections. Investigate the condition of buildings, equipment, and grounds, and recommends improvements in the facilities to ensure that needs are met.Ability to coordinate and partner with corporate stakeholder groups to build and maintain programs and processes consistent with MFI standards.Promote, and foster Michael Foods culture, values and principles. Assumes personal responsibility to insure safe and healthy workplace for everyone. Adhere to all safety policies and procedures and, incorporate safety and health in all jobs and tasks.Adheres to Quality work practices, follows GMP’s, maintains sanitary conditions and ensures that product quality is maintained. Reports to management any conditions or practices that may adversely affect food safety and quality.If you believe you are able to meet or exceed these responsibilites and possess the necessary requirements, we would enjoy speaking with you more about the opportunity to join our team! Qualifications: Bachelor’s degree in Engineering, Operations or Applicable technical knowledge or Degree/Certification from Trade School is requiredMinimum of 5 years of proven leadership or supervisory experience in industrial operations or maintenance or utilities operations is preferredMust have an understanding of PLC and logic controls for high speed operating equipment. Prior experience in SAP preferredRead and decipher mechanical drawings, schematics, and piping diagramsExperience in the installation, diagnosing and repairing mechanical equipment through troubleshooting required. Electrical troubleshooting is a plusExcellent written and verbal communication skills along with superb time management and project scheduling skillsAbility to lead teams and hold team members accountable, while successfully achieving results through internal and external resources and the ability to interact with all levels of the organizationExcellent administrative and follow up skills to achieve successful maintenance and repair programs
Full Time
11/7/2024
Columbus, OH 43224
(34.4 miles)
Securitas Technology Corportion, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services.Wecurrently have an Embedded Installation Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on our products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed.ResponsibilitiesServices intrusion, fire, CCTV, and access control security systems.Performs scheduled, routing preventive maintenance on a variety of equipment/systems under contract agreement by inspecting, adjusting, cleaning, and calibrating systems and checking out equipment to ensure it’s in satisfactory working order.Completes maintenance, within assigned hours, in a manner that reduces emergency calls and results in achieving the goal of zero call backs.Assists with the start-up of new equipment or system installation and adjusts as needed to ensure the system is operationalMay plan schedules, lay out basic electrical equipment installations, and assist in the start-up and check-out of new systems installationsPresents a professional image both in personal and vehicle appearance.Performs work assignments in a safe manner and within specified cost limits.Promotes, builds, and maintains good customer relations and assists with contract retention.Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements.Keeps abreast of changes and new developments in products and technology.Attends and completes training programs as requested.Minimum Requirements MUST HOLD a minimum of 1-2 years of experience installing and/or servicing intrusion, fire alarm, access control, and CCTV security systems.High School Diploma or equivalentVocational/Technical Degree in electrical, security, or computer systems preferredA thorough knowledge and understanding of intrusion detection systems, electronic access control, CCTV, IP video, Surveillance systems, fir alarm and life safety systemsNICET Certification preferredLenel, Pro-Watch, Software House, Picture Perfect certifications preferredBosch, Honeywell, Radionics, or DMP system knowledge preferredWorking knowledge IP addressing equipmentClimb ladders that extend up to 24 ft. in heightCarry items up to 75 poundsAbility to work on-call on a rotational basis covering after hours & weekend emergency calls.A valid state driver’s license, without restrictions, is required.Securitas offers comprehensive benefits including:Highly competitive salaryCompany VehicleCompany Cell PhoneOpportunity for annual merit pay increases.Paid company trainingMedical, Dental, Vision, and Life InsuranceCompany Paid Short Term and Long-Term Disability401K with 60% Match up to 6% of salaryPaid vacation, holiday, and sick timeEducational AssistanceExceptional growth opportunitiesWide variety of employee discounts on travel, equipment, and more!We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.
Full Time
11/6/2024
Russells Point, OH 43348
(22.8 miles)
Equipment Service TechnicianLocation: Russells Point, OhioStarting Pay -$34.65 - $39.60 hourly& $5,000 Sign on BonusWorkstyle - Onsite*Relocation assistance for candidates relocating over 50 miles*What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals.At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!About this Position:Repair and maintain equipment and support daily production. Respond to breakdowns and calls to keep production running. Support weekendmaintenancerepair and PM activities when necessary. Support areliability-centered maintenance program. Support team activities and contribute your own ideas.Responsibilities include:Support department in achieving daily production targets.Perform daily equipment inspections/checks for abnormal situations.Document daily equipment-related activities.Suggest and implement approval ideas that reduce repeat or potential downtime.Support weekend and plant shutdown activities.Preventative maintenance and continuous improvement of equipment and tools as required in order to guarantee safety, quality, and delivery targets.Equipment modifications as required to support business plan initiatives, new model requirements, or other retooling requirements.Daily Tasks:Equipment inspections.Daily reporting and tracking of activities.Preventative maintenance.Continuous improvement.Who we are seeking:Required Work Experience:Minimum of three months of relevant experience in a manufacturing environment with a 2-year technical degree or a minimum of two years of relevant experience if no degree.Required Education:High School Diploma or equivalentDesired skills:Daily reporting and tracking of activities.Plan, Do Check, Action follow-up items.Immediate response to production floor needs and requirements.Compliance with all safety policies and regulations.Able to communicate clearly in verbal and written format.Basic knowledge of Microsoft products.Ability to be flexible and change work hours as needed.Able to analyze problems and determine root causes.Strong self-direction and drive.Capability to develop a high level of expertise/aptitude in mechanical and electrical areas.Experience with Motoman robots.Experience with Omron PLCs.Honda Factors:Flexibility to work 2ndor 3rdshift long term.Flexibility to work weekends, holidays, daily overtime, and off shifts as needed.Willingness to travel (percentage of travel varies between roles)Additional Position Factors:Workstyle: OnsiteTravel: 5%At Honda, you will play a key role in our journey to become a company that society wants to exist now, and in the future. Your endless curiosity will drive innovation, and your courageous spirit will challenge the status quo. We believe having a workforce made up of diverse thinkers and innovators makes us a better Honda.Respect for each other and respect for diversity each and every day drives our associates to contribute at the highest level and work effectively in a team environment.We make the dream of mobility a reality with our innovative and high-quality products. Together, we Bring the Future to our customers, associates, and communities. We are Honda!What differentiates Honda and makes us an employer of choice Total Rewards:Competitive base salaryAnnual BonusIndustry-leading Benefit Plans (Medical, Dental, Vision)Paid time off, including vacation, paid holidays, sick time, and personal days401K Plan with company match + additional contributionRelocation assistance (if eligible)Career Growth:Advancement opportunitiesCareer mobilityEducation reimbursement for continued learningTraining and Development programsAdditional Offerings:Wellbeing programCommunity service and engagement programsProduct programsFree drinks onsiteTo be eligible for a signing bonus, the applicant must not have been previously employed by Honda as a fulltime associate.Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.
This website uses cookies for analytics and to function properly. By using our site, you agree to these terms.