The Maintenance Tech II performs work in connection with the operation, maintenance, and security of building, grounds, and facilities in order to ensure efficient plant operation. **Please note, this is a full-time position. Available schedules: Wed-Sun 8am-4:30pm and Tuesday-Saturday 8am-4:30pm ** Pay range $18-20/hr. depending on experience. A day in the life might include: planning, scheduling, participating in, and inspecting the work of outside contractors engaged in the operation, maintenance, repair, and safeguarding of buildings and Communitymay be on call in case of an emergency To be successful in the role, you would have: 4+ years of previous experience in building maintenance or construction, or any equivalent combination of training and experienceCertification, license or equivalent as required under state and/or local regulation to operate or repair certain equipment in a technical field such as HVAC, building trades or building utilities program preferredHigh school diploma or equivalentCurrent & valid Drivers’ License and driving record free of major infractions What's in it for you As the largest nonprofit owner/operator of senior living communities in California and one of the largest in the country, we are more than just a place to work. We are here to ensure that all we serve are provided with every opportunity to become their best selves as they define it, and this begins with YOU. At HumanGood, we offer the opportunity to be part of something bigger than yourself on top of an incredible package of benefits and perks for our part-time and full-time Team Members that can add up to 40% of your base pay. Full-Time Team Members: 20 days of paid time off, plus 7 company holidays (increases with years of service)401(k) with up to 4% employer match and no waiting on funds to vestHealth, Dental and Vision Plans- start the 1st of the month following your start date$25+tax per line Cell Phone PlanTuition Reimbursement5 star employer-paid employee assistance programFind additional benefits here: www.HGcareers.org This position is based onsite at our Hillside Community in McMinnville, Oregon Come see what HumanGood has to offer!

POSITION SUMMARY: Reporting to a Maintenance Supervisor or Maintenance Manager, the Maintenance Lead Technician provides direction to a group of technicians to ensure that all repairs and maintenance of equipment are performed in compliance with the Company’s safety standards and applicable federal and state regulations. The Maintenance Lead Technician is responsible for all chassis (diesel and non-diesel equipment and trucks) and refuse bodywork, including, but not limited to, hydraulic, electrical, heating and air conditioning system maintenance and repair. In addition, the Lead Technician diagnoses more complicated repair work; provides coaching on diagnostic techniques to subordinate technicians; performs external repair inspections to ensure all repair work is done in a safe manner; and schedules the repair work for his or her work group to ensure that all repair and maintenance work is done in a safe and timely manner, reducing lost productivity within the shop.PRINCIPAL RESPONSIBILITIES:Maintains expert knowledge of, and advanced working proficiency in, the following vehicle components and systems, with the ability to perform complex repair maintenance functions, both on-site and on the road:o Chassis component repair and maintenance; Refuse bodies, including control, hydraulic and electrical systemso Air and hydraulic braking systems;o Engine repair and maintenance;o Suspension, drivetrain and steering systems; ando Heating and air conditioning systems.o Performs line maintenance welding and fabrication.o Provides direction to technicians assigned to his or her work group to ensure that all repair and maintenance work is performed in a safe, efficient and timely manner. May plan and schedule repair work to minimize lost productivity.o Inspects repairs done by a third party vendor to ensure all work has been properly completed in accordance with the Company’s safety procedures and federal and state regulations; follows up when necessary.o Performs repair diagnostics on more complex matters.o Identifies the source of malfunctions using a variety of electronic tools.o Completes applicable Company training programs.o Handles Maintenance Supervisor responsibilities, as needed.o Acts as a mentor to technicians.Performs other job-related duties as assigned or apparent.QUALIFICATIONS:Ability to perform inspections and repairs without supervision in some (not all required) of the following heavy truck, or automotive systems:o Suspensions, Steering, General Engine, Transmissions, Brakes, Electrical, Hydraulics, Drive Train, Diesel Emissions.At least 3 years of experience in a role requiring compliance with OSHA Haz Com, OSHA Lock Out Tag Out, and all OSHA fire protection regulations is a plus but not required.At least 1 year of supervisory or lead technician experience is a plus but not required.ASE Heavy Truck Certifications (T1-T8) is a plus but not required.Class B or higher Commercial Driver’s License is a plus but not requiredValid Driver’s License.MINIMUM REQUIREMENTS:At least 3 years of experience as a technician working on heavy-duty trucks.#AC500Rewarding Compensation and BenefitsEligible employees can elect to participate in:• Comprehensive medical benefits coverage, dental plans and vision coverage.• Health care and dependent care spending accounts.• Short- and long-term disability.• Life insurance and accidental death & dismemberment insurance.• Employee and Family Assistance Program (EAP).• Employee discount programs.• Retirement plan with a generous company match.• Employee Stock Purchase Plan (ESPP).The statements used herein are intended to describe the general nature and level of the work being performed by an employee in this position, and are not intended to be construed as an exhaustive list of responsibilities, duties and skills required by an incumbent so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company.EEO STATEMENT:Republic Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, protected veteran status, relationship or association with a protected veteran (spouses or other family members), genetic information, or any other characteristic protected by applicable law.ABOUT THE COMPANYRepublic Services, Inc. (NYSE: RSG) is a leader in the environmental services industry. We provide customers with the most complete set of products and services, including recycling, waste, special waste, hazardous waste and field services.Our industry-leading commitments to advance circularity and support decarbonization are helping deliver on our vision to partner with customers to create a more sustainable world.In 2023, Republic’s total company revenue was $14.9 billion, and adjusted EBITDA was $4.4 billion. We serve 13 million customers and operate more than 1,000 locations, including collection and transfer stations, recycling and polymer centers, treatment facilities, and landfills.Although we operate across North America, the collection, recycling, treatment, or disposal of materials is a local business, and the dynamics and opportunities differ in each market we serve. By combining local operational management with standardized business practices, we drive greater operating efficiencies across the company while maintaining day-to-day operational decisions at the local level, closest to the customer.Our customers, including small businesses, major corporations and municipalities, want a partner with the expertise and capabilities to effectively manage their multiple recycling and waste streams. They choose Republic Services because we are committed to exceeding their expectations and helping them achieve their sustainability goals. Our 41,000 team members understand that it's not just what we do that matters, but how we do it.Our company values guide our daily actions:Safe: We protect the livelihoods of our colleagues and communities.Committed to Serve: We go above and beyond to exceed our customers’ expectations.Environmentally Responsible:We take action to improve our environment.Driven: We deliver results in the right way.Human-Centered:We respect the dignity and unique potential of every person.We are proud of our high employee engagement score of 86. We have an inclusive and diverse culture where every voice counts. In addition, our team positively impacted 4.6 million people in 2023 through the Republic Services Charitable Foundation and local community grants. These projects are designed to meet the specific needs of the communities we serve, with a focus on building sustainable neighborhoods. STRATEGYRepublic Services’ strategy is designed to generate profitable growth. Through acquisitions and industry advancements, we safely and sustainably manage our customers’ multiple waste streams through a North American footprint of vertically integrated assets. We focus on three areas of growth to meet the increasing needs of our customers: recycling and waste, environmental solutions and sustainability innovation.With our integrated approach, strengthening our position in one area advances other areas of our business. For example, as we grow volume in recycling and waste, we collect additional material to bolster our circularity capabilities. And as we expand environmental solutions, we drive additional opportunities to provide these services to our existing recycling and waste customers.Recycling and WasteWe continue to expand our recycling and waste business footprint throughout North America through organic growth and targeted acquisitions. The 13 million customers we serve and our more than 5 million pick-ups per day provide us with a distinct advantage. We aggregate materials at scale, unlocking new opportunities for advanced recycling. In addition, we are cross-selling new products and services to better meet our customers’ specific needs.Environmental SolutionsOur comprehensive environmental solutions capabilities help customers safely manage their most technical waste streams. We are expanding both our capabilities and our geographic footprint. We see strong growth opportunities for our offerings, including PFAS remediation, an increasing customer need.SUSTAINABILITY INNOVATIONRepublic’s recent innovations to advance circularity and decarbonization demonstrate our unique ability to leverage sustainability as a platform for growth.The Republic Services Polymer Center is the nation’s first integrated plastics recycling facility. This innovative site processes rigid plastics from our recycling centers, producing recycled materials that promote true bottle-to-bottle circularity. We also formed Blue Polymers, a joint venture with Ravago, to develop facilities that will further process plastic material from our Polymer Centers to help meet the growing demand for sustainable packaging. We are building a network of Polymer Centers and Blue Polymer facilities across North America.We continue to advance decarbonization at our landfills. As demand for renewable energy continues to grow, we have 70 landfill gas-to-energy projects in operation and plan to expand our portfolio to 115 projects by 2028.RECENT RECOGNITIONBarron’s 100 Most Sustainable CompaniesCDP DiscloserDow Jones Sustainability IndicesEthisphere’s World’s Most Ethical CompaniesFortune World’s Most Admired CompaniesGreat Place to WorkSustainability Yearbook S&P Global

Student/Recent GraduateTIG Welder If you would love to be part of a company that is poised for substantial growth then working for CPP and it's subsidiaries may be the right fit for you! We have multiple facilities in Albany, OR and are a world class supplier of titanium castings and components for the aerospace industry. If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, and other great benefits! Looking for current welding program students, those soon to graduate and recent graduates.The Welder I TIG welds in a chamber under argon atmosphere on titanium castings for the aerospace industry. Duties and Responsibilities: Titanium TIG welding in chamber to repair castings, following all applicable procedures.Using tools such as calipers, profile templates, etc., to accurately repair castings.Working with your team on rework plans to make castings conform to specification.Using grinder to shape tungsten.Load and unload castings from chamber.Keep equipment and work area clean and orderly.Other duties as assigned. Minimum Qualifications and Experience: Current enrollment in or recent completion of formal welding vocation program required.All others will be disqualified for this position but may be considered for other positions.Must pass welding test within 6weeks of being in position. Must pass an annual eye exam.This position requires ability tobend, lift, push, and pull (to place castings in and out of the tank) with or without reasonable accommodations.Must have basic high-school level math skills including addition, subtraction, multiplication, and division.Able to use small, fine tools.Good attendance record required.Requires continuous mental and/or visual attention to detail.Able to understand measurements; read and use measurement tools correctly.Able to work as a team player and be self-motivated.Able to read, understand, and follow written and verbal instructions.HS diploma or equivalent GED required, but candidates not meeting this requirement who possesses relevant experience will be considered.Must be at least 18 years of age.Solid job history including more than 1 year at previous or recent employer preferred.Must be able to lift up to 50 lbs with or without reasonable accommodations.Must be willing to undergo a pre-employment background check. Environment: The job is performed under reasonably good working conditions with some exposure to noise, temperature, and machinery. Schedule: Depending on current enrollment status of candidate. Part-time schedulesavailablefor students. Full-time schedule is typically swing or weekend shift.Overtime available based on business needs. Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: http://www.cppcorp.com/ U.S. person status is required for this position in order to comply with the Arms Export Control and Export Administration Act. U.S. persons are U.S. citizens, legal permanent residents as defined by 8 U.S.C. 1101(a)(20) or protected individuals as defined by 8 U.S.C. 1324b(a)(3). CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. This is a non-management positionThis is a full time position

Student/Recent GraduateTIG Welder If you would love to be part of a company that is poised for substantial growth then working for CPP and it's subsidiaries may be the right fit for you! We have multiple facilities in Albany, OR and are a world class supplier of titanium castings and components for the aerospace industry. If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, and other great benefits! Looking for current welding program students, those soon to graduate and recent graduates.The Welder I TIG welds in a chamber under argon atmosphere on titanium castings for the aerospace industry. Duties and Responsibilities: Titanium TIG welding in chamber to repair castings, following all applicable procedures.Using tools such as calipers, profile templates, etc., to accurately repair castings.Working with your team on rework plans to make castings conform to specification.Using grinder to shape tungsten.Load and unload castings from chamber.Keep equipment and work area clean and orderly.Other duties as assigned. Minimum Qualifications and Experience: Current enrollment in or recent completion of formal welding vocation program required.All others will be disqualified for this position but may be considered for other positions.Must pass welding test within 6weeks of being in position. Must pass an annual eye exam.This position requires ability tobend, lift, push, and pull (to place castings in and out of the tank) with or without reasonable accommodations.Must have basic high-school level math skills including addition, subtraction, multiplication, and division.Able to use small, fine tools.Good attendance record required.Requires continuous mental and/or visual attention to detail.Able to understand measurements; read and use measurement tools correctly.Able to work as a team player and be self-motivated.Able to read, understand, and follow written and verbal instructions.HS diploma or equivalent GED required, but candidates not meeting this requirement who possesses relevant experience will be considered.Must be at least 18 years of age.Solid job history including more than 1 year at previous or recent employer preferred.Must be able to lift up to 50 lbs with or without reasonable accommodations.Must be willing to undergo a pre-employment background check. Environment: The job is performed under reasonably good working conditions with some exposure to noise, temperature, and machinery. Schedule: Depending on current enrollment status of candidate. Part-time schedulesavailablefor students. Full-time schedule is typically swing or weekend shift.Overtime available based on business needs. Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: http://www.cppcorp.com/ U.S. person status is required for this position in order to comply with the Arms Export Control and Export Administration Act. U.S. persons are U.S. citizens, legal permanent residents as defined by 8 U.S.C. 1101(a)(20) or protected individuals as defined by 8 U.S.C. 1324b(a)(3). CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. This is a non-management positionThis is a full time position

The pay range per hour is $37.80 - $43.44Pay is based on several factors which vary based on position. These include labor markets and in some instances may include education, work experience and certifications. In addition to your pay, Target cares about and invests in you as a team member, so that you can take care of yourself and your family. Target offers eligible team members and their dependents comprehensive health benefits and programs, which may include medical, vision, dental, life insurance and more, to help you and your family take care of your whole selves. Other benefits for eligible team members include 401(k), employee discount, short term disability, long term disability, paid sick leave, paid national holidays, and paid vacation. Find competitive benefits from financial and education to well-being and beyond at .About job:SIGN ON BONUS: $7500 issued after 180 days in role! ***MUST have valid Oregon LME License** Up to $3.00 shift differential based on keyTuition Reimbursement programBenefits eligible after two weeks of employmentCurrently hiring for below shift:A2 Key - Saturday, Sunday, & Monday 5:15pm-5:45am About us:Working at Target means helping all families discover the joy of everyday life. We bring that vision to life through our values and culture. .A role in a Supply Chain Facility means being on the very front lines of getting product to the guest as fast as possible—a critical differentiator and one of the most essential Logistics functions. You’ll reach beyond the bounds of your team to partner across the enterprise and find solutions to support the business. Whether it’s through focusing on our regional or upstream distribution centers, import warehouses, or fulfillment and flow centers, you’ll have a chance to positively impact thousands of fellow team members and Target guests worldwide, further differentiating Target from all the rest.As an Engineering & Facilities Maintenance Technician 2 (MT2), you will assist in the installation, maintenance, and repair of automated material handling equipment and ensure high equipment availability rates. You will use preventive and predictive maintenance processes, and rapidly troubleshoot equipment breakdowns and quickly restore equipment to service to support the successful operation of the supply chain facility. You will work with other Target service technicians to solve problems, validate quality of work for outside specialty contractors, work with building leaders to optimize material handling equipment, and meet aggressive time lines. You will collaborate with Maintenance Technician 3s and Senior Systems Engineers to perform Root Cause Analysis for equipment failures. You may also assist in training other maintenance technicians and technician trainees to enhance their technical skills and job knowledge. A successful candidate in this role will:Maintain and troubleshoot all electrical and mechanical aspects of Material Handling Equipment (MHE) on site, including conveyor systems, sortation, robotics, or Automated Storage and Retrieval Systems (ASRS)Adjust scanners, cameras, field buses, scales and printer applicatorsReset, repair, or replace adjustable components (belts, chains, cables) and wearing components (guides, bearings, wheels, rollers, pulleys)Clean, lubricate, and calibrate equipmentUse appropriate job plans, procedures, and manualsMaintain and troubleshoot motors, photo eyes, relays, proximity sensors, solenoids, motor starters, tachometers, encoders, etc.Assist with basic electronics/ Programmable Logic Controls troubleshootingConduct maintenance and basic troubleshooting of all types of industrial robotsUtilize handheld devices and asset management system mobile apps to create and close Work Orders with appropriate data (labor hours, downtime, problem/cause/remedy, and parts used)Develop and maintain positive working relationships across all levels of the organizationFollow appropriate safety procedures and use Personal Protective Equipment (PPE) while maintaining equipment (Lock Out/Tag Out, Arc Flash, etc.), and ensure a safe work environment by eliminating potential equipment safety hazardsOperate Target-owned vehicles to complete maintenance activities on the exterior of the facility and within the trailer yard, as well as travel to nearby facilities and local stores to procure parts and suppliesCore responsibilities of this job are described within this job description. Job duties may change at any time due to business needs.About you:Physical Demands (must be able to perform with or without reasonable accommodation):Regular bending, lifting, stretching and reaching both below the waist and above the headLift and move totes up to 49 pounds eachWalking within and around the site with great frequencyAbility to climb ladders and gangways safely and without limitation, and work off platforms and equipment at significant heightsFull manual dexterity in both hands and wrists, eye/hand coordination, feet (foot pedals), manual (picking, pinching, holding, grasping), and wrist motion (repetitive flexion/rotation)Working conditions may include small spaces, dust, fumes/odors, hot/cold temperatures, inside/outside noise, vibration, standing on concrete for long hours and wet or uneven surfacesAbility to stand/walk for up to 10-12 hoursQualifications:High school diploma or equivalent requiredPossess or ability to obtain a valid driver’s licensePC competency and ability to use mobile apps on handheld devicesFamiliar with wiring diagrams, symbols and electrical measuringExperience in the following areas:Work order managementPreventive/predictive maintenance proceduresBasic blueprint and schematic readingElectrical and electronic principlesBasic metal fabrication and weldingIndustrial Controls and ElectronicsAbility to troubleshoot basic Input/Output functionsProgrammable Logic Control (PLC) programsDesired:Degree from a vocational school or college with a focus in the Mechanical or Electrical field2+ years apprenticeship or equivalent experience in the Mechanical or Electrical fieldExperience with automated conveyor systems and controlsExperience with Material Handling Equipment (MHE) safety standardsExperience with robotic operation/ maintenanceAmericans with Disabilities Act (ADA)In compliance with state and federal laws, Target will make reasonable accommodations for applicants with disabilities. If a reasonable accommodation is needed to participate in the job application or interview process, please reach out to candidate.accommodations@HRHelp.Target.com.

TIG Welder I - Titanium Aerospace Parts Production - Swing Shift If you would love to be part of a company that is poised for substantial growth then working for CPP and it's subsidiaries may be the right fit for you! We have multiple facilities in Albany, OR and are a world class supplier of titanium castings and components for the aerospace industry. If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, and other great benefits! Primary Purpose: The Welder I role TIG welds in a chamber under argon atmosphere on titanium castings for the aerospace industry. Duties and Responsibilities: Titanium TIG welding in chamber to repair castings, following all applicable procedures.Using tools such as calipers, profile templates, etc., to accurately repair castings.Working with your team on rework plans to make castings conform to specification.Using grinder to shape tungsten.Load and unload castings from chamber.Keep equipment and work area clean and orderly.Other duties as assigned. Minimum Qualifications and Experience: Completion of formal vocation program or prior TIG welding experience (1-2 years) preferred. Must pass welding test within 4-6 weeks of being in position. Must pass an annual eye exam.This position requires ability tobend, lift, push, and pull (to place castings in and out of the tank) with or without reasonable accommodations.Must have basic high-school level math skills including addition, subtraction, multiplication, and division.Able to use small, fine tools.Good attendance record required.Requires continuous mental and/or visual attention to detail.Able to understand measurements; read and use measurement tools correctly.Able to work as a team player and be self-motivated.Able to read, understand, and follow written and verbal instructions.HS diploma or equivalent GED required, but candidates not meeting this requirement who possesses relevant experience will be considered.Must be at least 18 years of age.Solid job history including more than 1 year at previous or recent employer.Must be able to lift up to 50 lbs with or without reasonable accommodations.Must be willing to undergo a pre-employment background check.Must be willing to participate in pre-employment and periodic drug screening.U.S. person status is required for this position in order to comply with the Arms Export Control and Export Administration Act. U.S. persons are U.S. citizens, legal permanent residents as defined by 8 U.S.C. 1101(a)(20) or protected individuals as defined by 8 U.S.C. 1324b(a)(3). Environment: The job is performed under reasonably good working conditions with some exposure to noise, temperature, and machinery. Schedule: Swing Shift - Monday-Thursday ($1.00/hr. shift differential)Weekend Day Shift - Friday-Sunday ($1.25/hr. shift differential) Relocation assistance may be available to qualified candidates. Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineeredcomponents and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: http://www.cppcorp.com/ CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. This is a non-management positionThis is a full time position

TIG Welder - Titanium Aerospace Parts - Swing Shift, Weekend Day Shift If you would love to be part of a company that is poised for substantial growth then working for CPP and it's subsidiaries may be the right fit for you! We have multiple facilities in Albany, OR and are a world class supplier of titanium castings for the aerospace industry. If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, and other great benefits! Primary Purpose: The Welder I TIG welds in a chamber under argon atmosphere on titanium castings for the aerospace industry. Duties and Responsibilities: Titanium TIG welding in chamber to repair castings, following all applicable procedures.Using tools such as calipers, profile templates, etc., to accurately repair castings.Working with your team on rework plans to make castings conform to specification.Using grinder to shape tungsten.Load and unload castings from chamber.Keep equipment and work area clean and orderly.Other duties as assigned. Minimum Qualifications and Experience: Completion of formal vocation program or prior TIG welding experience (1-2 years) preferred. Must pass welding test within 4-6 weeks of being in position. Must pass an annual eye exam.This position requires ability tobend, lift, push, and pull (to place castings in and out of the tank) with or without reasonable accommodations.Must have basic high-school level math skills including addition, subtraction, multiplication, and division.Able to use small, fine tools.Good attendance record required.Requires continuous mental and/or visual attention to detail.Able to understand measurements; read and use measurement tools correctly.Able to work as a team player and be self-motivated.Able to read, understand, and follow written and verbal instructions.HS diploma or equivalent GED required, but candidates not meeting this requirement who possesses relevant experience will be considered.Must be at least 18 years of age.Solid job history including more than 1 year at previous or recent employer.Must be able to lift up to 50 lbs with or without reasonable accommodations.Must be willing to undergo a pre-employment background check.Must be willing to participate in pre-employment and periodic drug screening. Environment: The job is performed under reasonably good working conditions with some exposure to noise, temperature, and machinery. Schedule: Weekend Day Shift (Friday-Sunday 5:00am-5:30pm) - $1.25/hr. shift differentialSwing Shift (Monday-Thursday 3:30pm-2:15am) - $1.00/hr. shift differentialOvertime based on business needs Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineeredcomponents and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: http://www.cppcorp.com/ U.S. person status is required for this position in order to comply with the Arms Export Control and Export Administration Act. U.S. persons are U.S. citizens, legal permanent residents as defined by 8 U.S.C. 1101(a)(20) or protected individuals as defined by 8 U.S.C. 1324b(a)(3). CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. This is a non-management positionThis is a full time position

CNC Machinist - Aerospace Components - Weekend Days If you would love to be part of a company that is poised for substantial growth with opportunities for advancement, then working for CPP and its subsidiaries may be the right fit for you! We have multiple facilities in Albany, OR and are a world class supplier of titanium castings and components for the aerospace industry. If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, and other great benefits! Primary Purpose: CNC Machinists will set up and run the 5-axis CNC machining centers. Duties and Responsibilities: Operate/set-up on Haas Vertical Mills safely and efficiently.Maintaining a clean work area.Participate in Continuous Improvement processes and Lean Thinking.Perform in-process part inspections with handheld MTE (Calipers, Gauge Pins, Micrometers, Bore Gauges). Minimum Qualifications and Experience: HS diploma or equivalent GED required, but candidates not meeting this requirement who possesses relevant experience will be considered.1-3 years of experience preferred.Familiar with Haas controllers preferred.Ability to understand and follow written set up sheets and verbal instructions.Experience with basic hand held inspection equipment (Calipers, Micrometer, Gage Pins, etc.).Works effectively and efficiently with minimal supervision.Reliable and punctual, attendance.Must be able to push/pull/lift up to 50 lbs with or without reasonable accommodations.Must be willing to undergo a pre-employment background check.Must be willing to participate in pre-employmentdrug screening. Working Conditions: Standing 8-10 hours per day.Moderate noise level (CNC Machines as well as De-Burr).Fast paced environment with opportunity to learn and grow with in the job. Schedule: Weekend Day Shift (Friday-Sunday, 3x12)$1.25/hour shift differentialOvertime offered based on business needs. Relocation assistance may be available to qualified candidates. Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: http://www.cppcorp.com/ U.S. person status is required for this position in order to comply with the Arms Export Control and Export Administration Act. U.S. persons are U.S. citizens, legal permanent residents as defined by 8 U.S.C. 1101(a)(20) or protected individuals as defined by 8 U.S.C. 1324b(a)(3). CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. This is a non-management positionThis is a full time position

Journeyman Electrician/Millwright - Titanium Aerospace Parts Manufacturing- Swing Shift, Weekend Day Shift, and Weekend Graveyard Shift If you would love to be part of a company that is poised for substantial growth with opportunities for advancement, then working for CPP and its subsidiaries may be the right fit for you! We have multiple facilities in Albany, OR and are a world class supplier of titanium castings for the aerospace industry. If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, and other great benefits! Primary Purpose: The Maintenance Millwright/Electrician implements and expedites general maintenance functions, preventative maintenance and repair of manufacturing equipment, and improvement of the facilities. Depending on licensing, it may include electrical, pneumatic, vacuum, hydraulic, and mechanical systems. Duties and Responsibilities: Install, setup, service, troubleshoot, repair, and maintain all types of machine control components and power transmission components with the support of Plant Supervising Electrician, for reliability of many types of industrial manufacturing equipment.Diagnose malfunctioning systems and components, using test equipment and hand tools to locate the cause of the breakdown and correct the problem.Locate root cause and repair mechanical and electrical systems using sound troubleshooting methods to ensure that permanent repairs can be made to minimize costly downtime.Ensure operation of mechanical and electrical equipment by completing preventive maintenance requirements on machining lathes and mills, motors, pneumatic tools, and other production equipment; following diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications; troubleshooting malfunctions.Use all required hand and power tools including, but not limited to; drill, saw, torch, and jacks, as well as ladders, cranes, high lift, and other maintenance equipment.Preferred; Ability to perform welding and fabrication (torch, mig, stick) of custom parts or to repair equipment to original condition.Maintain clear communication with supervisor and with production regarding equipment status of repair, and release to production.Provide proper record keeping, documentation, and information for, but not limited to; Machine, equipment and facility files.Perform installation, service, and repairs to buildings, facilities, and grounds including, but not limited to; doors, windows, structure and supports, guard rails and fencing, air handling and exhaust units, equipment foundations, and pavement.Maintain equipment, parts, and supplies inventories by checking stock to determine inventory level; anticipating needed equipment, parts, and supplies; placing and expediting orders; verifying receipt.Operate and/or maintain a variety of Tools and equipment.Must be familiar with the scope and limitation of the state licensing requirements in Electrical work.Arc flash, forklift, and arial platform training/experience a plus.Other duties as assigned. Minimum Qualifications and Experience: Electrical: Must have ability to trouble shoot and repair electrical installations and equipment effectively.Demonstrated experience in electrical and/or electronic and mechanical maintenance including motors, controls, power supplies, AC/DC theory, power distribution, PLC's, hydraulics/pneumatics, lubrication, power transmission, pumps. Millwright: Preferred; Experience in an industrial maintenance or millwright setting, with working knowledge of hydraulic, pneumatic, and mechanical systems preferred.Requires working knowledge of blueprints, technical part manuals and their application. This may include electrical and mechanical diagrams, gages, meters, calipers and other measuring tools.Oregon PJ, PS, or J Electrical license required.High School diploma or GED preferred. General: Basic computer skills.Demonstrated ability to follow all established safe work procedures including, but not limited to personal protection equipment, safety lockout/tag-out, confined space, respiratory, and elevated work areas.Use all required hand and power tools including, but not limited to: drill, saw, torch, and jacks, as well as ladders, cranes, high lift, and other maintenance equipment.Must have some combination of Electrical and Millwright experience, knowledge, or licensing. Examples include but are not limited to: Schedule: Swing Shift - Monday-Thursday ($1.00/hr. shift differential)Weekend Day Shift - Friday-Sunday($1.25/hr. shift differential)Weekend Graveyard Shift - Friday-Sunday($2.50/hr. shift differential)Must be available to handle weekend and emergency calls on a rotating basis.Overtime is required as needed. Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: http://www.cppcorp.com/ U.S. person status is required for this position in order to comply with the Arms Export Control and Export Administration Act. U.S. persons are U.S. citizens, legal permanent residents as defined by 8 U.S.C. 1101(a)(20) or protected individuals as defined by 8 U.S.C. 1324b(a)(3). This is a full time position

Gentle Dental is seeking an enthusiastic and outgoing Dental Hygienist to join our vibrant dental practice. The ideal candidate is a personable professional who is passionate about dental health and enjoys building strong relationships with patients. The role involves performing dental hygiene procedures, educating patients on best oral hygiene practices and products, and practicing proactively. This position is open to both full and part time candidates Responsibilities Include: Patient Care: Conduct thorough hygiene procedures to include: scaling and root planing, gingivitis scaling, and prophylaxis.Assessment: Perform comprehensive periodontal charts, medical history assessments, and caries risk assessments.Patient Education: Educate patients on hygiene treatments needed based on medical and periodontal assessments.X-Rays: Take digital radiographs as necessary for patient diagnosis.Treatment Planning: Assist in developing personalized AAP and ADA based treatment plans per patient need, based on assessments and dentist recommendations.Collaboration: Work closely with dentists and other dental professionals to ensure coordinated patient care.Patient Interaction: Engage patients in a friendly, reassuring manner, while addressing any concerns or questions they may have.Documentation: Maintain accurate patient records and documentation of treatment plans and completed procedures.Infection Control: Adhere strictly to infection control protocols and maintain a clean and sterile working environment. Competitive hourly base pay ($60 - $65+) with additional bonus opportunity. Location: Gentle Dental Corvallis1550 NW 9th StreetSuite 106Corvallis, OR 97330 Requirements: Education: Degree or certification in Dental Hygiene from an accredited institution.License: Valid state dental hygiene license.Other licenses/certifications: CPR, Local Anesthesia, Nitrous Oxide Sedation, Laser Certification (where required). Benefits: - Competitive base salary- Opportunity for monthly bonus compensation- Continuing Education- Paid Life Insurance- Paid Malpractice- Pre-tax Savings Plan- 401K- Medical Insurance- PTO Accrual- Positive and supportive work environment- Direct contribution to improving patients' oral health and overall well-being Apply today!