Trenton, NJ 08618 • (24.6 miles) • Full Time • 9/22/2026

Plastics EngineerJob Summary Responsibilities include part design and development, materials selection and quotation of Plastic parts. As well as any injection molding tooling associated with its manufacture. Establishes manufacturing control and quality plans. Needs to be able to interact professionally with customers at a high level. Primary Responsibilities:Design plastics or injection-mold fabrication processes.Create and improve injection-mold machinery processes.Research and develop new manufacturing processes.Analyze manufacturing data and suggest improvements.Analyze production capabilities of manufacturing machinery lines.Ensure quality output of molded components.Develop and design engineered plastic parts, insert molding of parts and assemblies.Interact with customers, suppliers

Exton, PA • (25.8 miles) • Full Time • 9/22/2026

Applied Controls, a SunSource company, is a high-tech automation distributor and solutions provider. We educate and support local manufacturers in implementing emerging technologies to reduce costs, increase productivity and improve safety. Our offerings range from industrial computers and software, Robotics, Machine Vision, and Motion Control.Our goal is to increase productivity to keep manufacturing in America successful and prosperous. www.appliedc.com Job summary:The role will support the Applied Controls Solutions Department with technical capabilities in the construction of automated systems primarily focused around robotics and industrial vision systems. Support/manage the on-site installation of industrial equipment. Fulfill customer requirements for Factory Acceptance Testing of t

Moorestown, NJ • (25.9 miles) • Full Time • 9/22/2026

Role OverviewThis role supports the development, analysis, and verification of advanced radar systems deployed across fixed, transportable, and naval platforms. The position focuses on systems engineering activities including requirements development, system architecture, performance analysis, modeling and simulation, and verification of scalable, software-defined, multi-mission radar systems within a secure defense environment.Working as part of a collaborative engineering team, this individual will contribute across the systems engineering lifecycle, supporting system definition, architecture development, trade studies, modeling, integration planning, and requirements verification. The role partners closely with software, hardware, integration, and test engineers to ensure mission-critic

Trenton, NJ 08610-4316 • (26 miles) • Full Time • 9/22/2026

Service Technician for Bathroom RemodelsFull Time position in 127 US 206, Suite 17 Hamilton, NJ, 08610We are seeking a skilled and detail-oriented Service Technician to join our team. The ideal candidate will have experience in bathroom remodeling or similar trades, light plumbing, & carpentry, be committed to quality workmanship, and have a strong focus on customer satisfaction. You will be responsible for performing service and warranty work, minor repairs, and ensuring the job site remains clean and organized.ResponsibilitiesComplete service and warranty work on bathroom installations (walk-in showers, tubs, etc.)Assist with minor remodeling and repair tasksConduct assessments of installed products and provide feedbackMaintain a clean, organized, and safe work environmentCommunicate eff

Douglassville, PA 19518 • (26.2 miles) • Full Time • 9/22/2026

Sunny Sky Products - Douglassville is a leading aseptic beverage manufacturer located in Douglassville, PA. We specialize in processing shelf-stable dairy, coffee beverages, and coffee creamers. Our company is rapidly growing and is seeking passionate people to join our team. We currently operate production 24 hours a day, 7 days a week.The ShiftSupervisorprovides leadership and management in a food manufacturing environment. This key leadership position requires the ability to coach and direct other leaders and Production Associates while collaborating with internal and external resources and support functions to meet production requirements and exceed company goals.We are currently seeking for: Crew D- Wednesday, Thursday, Friday every other Saturday 3 PM-3:30 AMOBJECTIVES: Provides a sa

Plainsboro, NJ 08536 • (35.5 miles) • Full Time • 9/22/2026

Process Plant Millwright & Equipment Technician Princeton, NJ | 1st Shift Join our purposebring progress to life Your craft keeps people safe, product quality high, and sustainability goals on track. At dsmfirmenich, your handson skill with pumps, valves, piping, and rotating machinery sustains the chemical processes that feed, protect, and care for millions. If you’re a problemsolver who thrives on challenging mechanical workand you can flex into electrical tasks when neededyou’ll feel at home here. Impact you’ll make Keep critical process equipment online through preventive, corrective, and predictive maintenance on piping systems, valves, gauges, air/product lines, and more.Execute mechanical and applicable electrical maintenance on plant and building systemssolenoids, limit switches, a

Coatesville, PA 19320-4014 • (35.7 miles) • Full Time • 9/22/2026

CNC Manufacturing is an industry leading expert in the precision machining of performance critical parts in diverse industries including defense and aerospace. The 37,000 sq. ft. climate-controlled facility in Coatesville, PA features some of the industry’s most technologically advanced machining and quality control equipment. CNC Manufacturing celebrates the diversity and expertise of its team members and proudly employs several armed services veterans.We are looking for responsible Quality Control Inspectors to perform first article, in-process and final inspections of complex, tight tolerance, precision parts. The ideal candidate will possess a trained eye for detail, will be reliable, and committed to this position. An in-depth knowledge and comprehension of quality standards and measu

Kennett Square, PA 19348 • (37 miles) • Full Time • 9/22/2026

Are you interested in a career in manufacturing, focused on machining? Do you take pride in producing quality product? If so, we want YOU to join our team! Located in Kennett Square, PA, CPV is an industrial valve manufacturer looking for individuals to join our growing company. This position produces machined parts by setting up and operating a computer numerical control (CNC) machine, maintains quality and safety standards, keeps records, and maintains equipment and supplies. We have a clean, temperature-controlled environment with working hours of Monday through Thursday 3:00pm - 1:00am. If you are mechanically inclined, apply today!**Must be able to train on 1st shift Monday through Friday 6:30am - 3:15pm prior to going on 2nd shift.**Essential Responsibilities:Read and understand blue

Leesport, PA 19533 • (40.3 miles) • Full Time • 9/22/2026

WHAT WE'RE BUILDING71% of our planet is covered by water. We want everyone to make the most of it. At Seakeeper, we use advanced technology to solve one of boating's biggest challenges: motion. From our industry-leading gyrostabilizers that eliminate boat roll to Seakeeper Ride's real-time vessel attitude control system, our products are transforming how people experience life on the water. Our mission is to create products that transform the boating experience while building an organization that employees want to work for, customers want to buy from, and vendors want to partner with. We're ambitious, fast-moving, and constantly looking for better ways to serve our customers and each other.WHY YOU'LL LOVE THIS ROLEOwn a critical piece of the puzzle from designing fixtures and tooling to op

Dayton, NJ 08810 • (40.5 miles) • Full Time • 9/22/2026

At SunnyD, we’re more than an iconic orange drink with a bold, one-of-a-kind taste we’re a team of people who take pride in making it. Every bottle that rolls off the line at ourDayton, New Jerseyplant represents teamwork, precision, and a shared commitment to quality. Here, you’ll find a fast-paced manufacturing environment where your ideas, skills, and reliability truly make a difference.If you’re driven, dependable, and ready to be part of a team that keeps one of America’s most beloved beverages flowing SunnyD is the place for you.Perks of Being Part of Our TeamCompetitive pay starting at $22.06/hourTraining and Advancement Opportunities – Build your skills, grow your career and earn up to $26/hour as you gain experienceCompetitive medical, dental, and vision benefitsEmployer-paid life

Somerset, NJ 08873 • (41.2 miles) • Full Time • 9/22/2026

DEPARTMENT: Quality AssuranceREPORTS TO: Quality SupervisorPOSITION DESCRIPTION:The QA Auditor reports to the Quality Assurance Manager and works closely with the Operations Team to ensure quality for all products. The QA Auditor aligns with manufacturing, maintenance, technicians, tool room, and others in support of the overall corporate goals and objectives. Candidates will be comfortable working independently as well as collaboratively while being a positive reflection of corporate values.DUTIES AND RESPONSIBILITIES:Collaborates with management and supervisory personnel from Operations, Continuous Improvement and Engineering to resolve problems affecting product quality; collaboration includes reacting, investigating, and following up for non-conformance issues and working jointly towar

North Brunswick, NJ 08902 • (42.2 miles) • Full Time • 9/22/2026

Job DescriptionDate4/2023Location1300 Airport Road, North Brunswick NJTitleAssociate, ManufacturingDepartmentStandard ManufacturingReports toProduction, SupervisorFLSA (Exempt or Non-ExemptNon-ExemptRole OverviewThe Manufacturing Associate is responsible for the operation and set up of one (1) machine under the guidance of a seasoned operator.The position includes assisting with the setup, operation, cleaning, moving supplies and finish products and preventative maintenance of all related equipment. The Associate is accountable for overall performance including safety, quality, shrink, attainment, and production efficiency. Areas of ResponsibilityEnsure full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as

Monroeville, NJ 08831 • (43.6 miles) • Full Time • 9/22/2026

Production & Fulfillment Assistant | Full Time / Direct HireMonroe Township, NJ area | Fully On-SiteOur client is seeking a dependable and detail-oriented Production & Fulfillment Assistant to join its team. This is a hands-on position that combines light assembly, quality control, order fulfillment, packaging, and inventory support.The ideal candidate enjoys working with their hands, takes pride in producing quality work, and is comfortable working in a fast-paced environment where accuracy and attention to detail are important.ResponsibilitiesPerform light assembly, including attaching components, cutting materials to specified lengths, and basic wire wrapping or stringingInspect materials and finished products for quality, accuracy, appearance, and structural integrityPick, pack, and pr

New Holland, PA 17557 • (44.8 miles) • Full Time • 9/22/2026

Job Title: Project Room Production Operator, 1st shiftHours Required: Monday – Thursday, 5:30 am to 4 pm with OT, weekends, and coverage for other shifts as required.Position Description: This position operates packaging equipment in a food production line in an assembly process. This includes using equipment to assist with manufacturing, packaging, and other steps along the production lines. Operates lines within quality specifications using procedures set by Company policy to ensure that final products meet high-quality standards. This position works under minimal supervision and directs work of line employees. The position follows standard work methods and practices safe work habits to ensure production is as efficient and safe as possibleMajor Duties & Responsibilities:Sets up line, pr

Philadelphia, PA 19128 • (15.1 miles) • Full Time • 9/21/2026

Job Description Position: Sr. Technical Lead - Mechanical EngineerLocation: Nashua, New Hamshire & Valley Green, PennsylvaniaJob Type: Contract W2Interview: Phone/VideoJob Summary: Job Description: Strong Experience in design of components with various manufacturing processes like, Stamping, Molding & Machining. Disciplined team lead, ability to work independently and handle team Proficient in Creo & SolidWorks CAD software (Creating 3D models, Sheet Metal, 2D drawing and Assembly) Strong knowledge in manufacturability considerations for Plastic & Sheetmetal Experience in Geometric Dimension & Tolerancing (GD&T) Experience in Tolerance stack up analysis. Create DFMEA and identify relevant product risks. Identifying the suitable material, apply DFM/DFA concepts in design and Familiar with l

Philadelphia, PA • (19 miles) • Full Time • 9/21/2026

Company Description IntegriChain is the data and application backbone for market access departments of Life Sciences manufacturers. We deliver the data, the applications, and the business process infrastructure for patient access and therapy commercialization. More than 250 manufacturers rely on our ICyte Platform to orchestrate their commercial and government payer contracting, patient services, and distribution channels. ICyte is the first and only platform that unites the financial, operational, and commercial data sets required to support therapy access in the era of specialty and precision medicine. With ICyte, Life Sciences innovators can digitalize their market access operations, freeing up resources to focus on more data-driven decision support. With ICyte, Life Sciences innovators

Philadelphia, PA • (19 miles) • Full Time • 9/21/2026

Bachelor's Degree (BS) in Mechanical EngineeringPE License preferred.Minimum of 5 - 10 years’ experienceExperience with HVAC systems, plumbing and fire protectionRequired knowledge of AutoCAD and preferably REVIT softwareLEED Certification or Certified Energy Auditor/Manager a plusMust be willing to travel from time-to-time (no longer than one week)Miller-Remick is a full-service MEP engineering firm with a variety of long-term contracts with federal, state, and county government agency clients. Our impressive list of project types include renovation, retrofit, expansion, and new construction of facilities that encompass hospital/health care, government, energy, correctional, and education.Responsibilities: We are looking for a talented engineer with the ability to develop mechanical drawi

Philadelphia, PA • (19 miles) • Full Time • 9/21/2026

Department: Body Shop / Collision CenterReports To: Body Shop ManagerEmployment Type: Full-TimePosition SummaryThe Body Assembler supports the collision repair process by removing, reassembling, and installing vehicle body components, trim, and hardware. Working alongside body technicians, the Assembler handles disassembly and reassembly, mechanical R&I (remove and install) operations, and final fit-and-finish so repaired vehicles are returned to pre-accident condition and delivered on schedule.Key ResponsibilitiesDisassemble damaged vehicles to expose repair areas, tagging and organizing parts, fasteners, and trim for reassembly.Reassemble and install exterior and interior body panels, bumpers, moldings, trim, lamps, grilles, and hardware to factory specification.Perform remove-and-instal

Pottstown, PA 19464 • (19.1 miles) • Full Time • 9/21/2026

The Foreman is responsible for overseeing and directing the daily operations of refrigeration projects. This role involves supervising a team of skilled workers and ensuring that all projects adhere to specified standards, timelines, and budgets. The ideal candidate will have extensive experience in refrigeration systems, strong leadership abilities, and a keen eye for detail to ensure the successful execution of project objectives.Duties/Responsibilities:Supervise and direct the daily operations of refrigeration projects.Lead a team of skilled workers to ensure adherence to specified standards, timelines, and budgets.Coordinate with other departments to ensure seamless project integration and execution.Conduct regular inspections and quality control checks to maintain high standards of wo

Clifton Heights, PA 19018 • (23.9 miles) • Full Time • 9/21/2026

Benefits:401(k)401(k) matchingCompetitive salaryDental insuranceHealth insurancePaid time offVision insuranceMachine Tool Service Tech (Shop & Field) – Aldan, PA KAAST Machine Tools is a rapidly growing international distributor of CNC and conventional machine tools, serving manufacturers throughout North America. We provide sales and service for one of the industry's most comprehensive lines of metalworking equipment, including CNC and conventional mills, lathes, saws, grinders, press brakes, shears, angle and plate rolls, laser systems, waterjets, and other fabrication equipment. As our business continues to grow, we are seeking a motivated Machine Tool Service Technician to join our team in Aldan, PA. This position offers a combination of shop work and field service, making it an excell

Reading, PA 19605 • (37.6 miles) • Full Time • 9/21/2026

Beverage Systems has been a family owned business since 1988. We are dedicated to bringing exceptional service to the dispensed beverage industry. Whetherit is a full service, equipment and sales support program or a standard service call program, Beverage Systems uses technology,experience, and drive to make our customer's beverage program a success!We are looking for talented individuals with a passion for customer service, attention to detail, and a desire to apply their technical skills throughout a busy work day. You will spend most of your day in the eastern PA area servicing customers, troubleshooting, and working with our regional dispatch team. There will be times that overnight and traveling will be required based on business need. This role will require interaction with various

Allentown, NJ 08501 • (37.7 miles) • Full Time • 9/21/2026

JOB TITLE: AssemblerFLSA STATUS: Non-exemptJOB TYPE: Full-timeDEPARTMENT: Flovent - 515REPORTS TO: ManagerJOB SUMMARYThe Assembler will be performing light assembly work with plastic and sheet metal parts.PRIMARY FUNCTIONSAssemble items as instructed by supervisor/manager.Follow all safety rules and quality standards including all company policies and procedures.Perform job assignments in a safe and productive manner while maintaining high quality levels.Adhere to standardized work practices in a continuous improvement environment.Keep work areas clean and organized while taking care of all equipment and facilities.Other duties as assigned.SKILLS & QUALIFICATIONSHas rudimentary mechanical ability and understanding.Experience with using small hand tools .Ability to use screw guns, air tools

Wind Gap, PA • (40.2 miles) • Full Time • 9/21/2026

Description: BRD Noise a VMC Group company is looking for an enthusiastic and willing-to-learn CNC Machine Operator to join our manufacturing team. This position will also perform various operations throughout the shop with the ultimate goal of helping to build the best solutions in our industry. This position is full time with the opportunity for overtime during our busiest cycles.Responsibilities not limited to:Set up and operate static cutting table to cut fiberglass and various materials as per engineering specificationsOperate semi-automatic grommet machine.Cut master rolls to required length. Produce high quality parts with minimum amount of re-work in preparation for the next manufacturing operation.Assemble and bond materials together by spraying and rolling glue, taping or by othe

North Wales, PA 19454 • (3.1 miles) • Full Time • 9/21/2026

Benefits:401(k)Company partiesDental insuranceHealth insurancePaid time offVision insuranceTitle: Exterior Production Associate Department: Exterior Production Classification: Non Exempt Reports to: Director of Exterior Production Date Created: August 2026 Status: Full Time Job Summary: The Exterior Production Associate is a role that helps Project Managers maintain project efficiency in the field. The individual will spend time in the warehouse, at supplier locations and active project sites handling material logistics, jobsite upkeep, and day-to-day errands under the direction of the Project Management team. Success in this role depends on clear communication, reliable follow-through, and the ability to carry out instructions accurately and consistently. Supervisory Responsibilities: N/A

Plymouth Meeting, PA 19462 • (10.6 miles) • Full Time • 9/21/2026

OverviewWould your peers describe you as detail-oriented with an inclination for following protocol? Have you been searching for that perfect position with:Access to medical, dental, and vision benefits with a great employer contribution?A work environment where you feel like an integral part of the team?Daytime Work Hours (No Nights – No Weekends)?If so, Dasher may be the place for you!The Automotive Quality Assurance Auditor performs audits for an automotive inspection program to ensure compliance with State and Federal procedures and guidelines. This is a field-based position that offers training and state certification and operates similar to that of a 'Secret Shopper'.Key Functions/ResponsibilitiesMaintain compliance by conducting undercover automotive service center site visits, obse

King of Prussia, PA 19406 • (13.8 miles) • Full Time • 9/21/2026

The Sr. Electrical Engineer will support the various projects located in King of Prussia, PA.RESPONSIBILITIES:Electrical Reliability worst-case and parts stress analyses.Hands-on test, troubleshooting, and integration of electronic hardware.Producing interface and interconnect diagrams.Design/develop custom test equipment / test racks.Communications and signaling protocols (for example SPI, I2C, CAN, LVDS, SpaceWire, parallel/serial bus).Major program reviews such as System Requirements Review, Preliminary Design Review, Critical Design Review, Test Readiness Review, Qualification Readiness Review.Missile or satellite hardware or related test hardware.Failure investigation and root cause analysis.Requirements definition, design, integration, test, verification, and validation of hardware i

Center Valley, PA • (19.5 miles) • Full Time • 9/21/2026

Commodity Manager - Electronics - Components - Mfg. Commodity Manager - Electronic Components - Semiconductor(One position filled and just opened another req.)Onsite position in Center Valley, PA area OR may consider Austin, TX location. And we assist with relocation!Base salary, $135K-$150K and DOECandidates must have experience working within companies that have their own Manufacturing.Must be hands on with personal connections (rolodex) with both Suppliers and Distributors (Electronics, semiconductors and the like).Please see the minimum requirements for this role:8+ years' experience dealing directly with electroniccomponentsuppliers (manufacturers and/ordistributors)Inclusive of actives, passives, magnetics, electromechanical, andPCBs.Experience collaborating within-house manufacturin

Trenton, NJ 08628 • (22.7 miles) • Full Time • 9/21/2026

Who We AreBinsky is a leading mechanical contractor delivering complex HVAC, plumbing, and process systems across Central NJ and PA. Known for innovation, prefabrication expertise, and high-performance project delivery, we execute projects ranging from large-scale construction to mission-critical facilities. Our success is driven by exceptional people and a commitment to quality, safety, and client partnership.We are seeking an experiencedProject Manager (Mechanical Construction)to join our large-project MCaP division.Why We Need You!We need talented individuals, like you, to lead complex, high impact projects and can help us continue to grow and succeed!The RoleThe Project Manager is accountable for the full lifecycle delivery of large-scale mechanical construction projectsfrom preconstru

Philadelphia, PA 19112 • (26.4 miles) • Full Time • 9/21/2026

Description: Ghost Robotics is the industry leader in legged robotic systems that not only help our customers solve complex operational, national security, and technical challenges to save lives, reduce harm and improve outcomes.About the RoleWe are hiring a Senior Engineer, Electronics to own the electrical architecture of critical subsystems on Ghost's Q-UGV platform as we scale for defense, homeland, public safety, and enterprise customers worldwide. This is not a role where you will execute a spec someone else handed down. You will set the design direction, make the hard tradeoffs between power, thermal, cost, and manufacturability, and carry PCBs from concept through field deployment.You will report to the Head of Electronics and Firmware and work shoulder to shoulder with firmware, m

Gloucester City, NJ 08030 • (27 miles) • Full Time • 9/21/2026

Facility Operator - Working with a tight-knit team to solve the everyday issues of producing high quality asphalt binder.We are a great company with great pay and great benefits. Ergon Asphalt & Emulsions is a relationship-driven company that values each employee's willingness to learn and contribute to the team. We are family owned with locations throughout the U.S. and Mexico, but we pride ourselves on maintaining a small-company feel.Our position is for a full-time Facility Operator at our Gloucester, NJ, facility. The ideal operator would possess good organizational, time management, problem-solving, and housekeeping skills. We want people who look for opportunities to learn new skills and can contribute to making our facility an even better place to work.Our Gloucester facility operat

North Wales, PA 19454 • (3.1 miles) • Full Time • 9/21/2026

Volpe Enterprises is Hiring!Volpe Enterprises, Inc. is a full-service design-build remodeling company transforming homes across the Philadelphia suburbs since 1970. We're growing and looking for a Interior Residential Remodeling Journeyman who can accurately complete all assigned jobs , keep crews and trades moving, and ensure homeowners get the high-quality results they expect.The Journeyman position will be assigned to assist with building, installation, and repairing structures, fixtures, related to interior remodeling projects. We are seeking applicants with experience in completing projects with a variety of materials including drywall, wood, masonry, and steel with the highest level of quality and efficiency.BenefitsTotal compensation packages starting at $45,000, annually, based on

Horsham, PA 19044 • (7.6 miles) • Full Time • 9/21/2026

ROLE: Facility Contracting & Quality Assurance (QA) Services analyst is responsible for the review and auditing of facility contracts to include but not limited to reviewing the billing accuracy after the contract has been entered into the billing system for all lines of business.TASKS AND RESPONSIBILITIES:Primary point of contact for contractual billing questions and/or concerns from internal/external customers.Audits the correctness of all facility contracts and FDS entered by AMS (RCM Application Management Support)Work with Sales Reps/RGM’s to obtain all outstanding contracts.Responsible for assisting with the transition of the acquisition process, to include review of contracts, invoicing pricing and auditing the accuracy of information in appropriate systems.Serves as the primary poi

Warminster, PA 18974 • (10.1 miles) • Full Time • 9/21/2026

Are you the technician people call when a machine isn't working and they need someone who can diagnose the problem-not just replace parts?We're looking for an experienced Shop Service Technician to join our Warminster, PA service team. This is a hands-on opportunity for a technician who enjoys troubleshooting, repairing, and maintaining a wide range of construction and industrial equipment in a clean, well-equipped shop environment.You'll work alongside an experienced service team while having the opportunity to take ownership of repairs from diagnosis through completion.What You'll Work On:You'll diagnose, repair, service, inspect, and maintain a variety of equipment including:Compact and Heavy construction equipmentSkid steers and compact track loadersAerial equipmentDiesel-powered machi

Huntingdon Valley, PA 19006 • (13.7 miles) • Full Time • 9/21/2026

ABOUT OR COMPANYWith over 50 years of experience, Germantown Tool & Manufacturing/GTM Artisan Metal is one of the area's leading, fully integrated metal fabrication shops. From our facilities in Huntingdon Valley, Pennsylvania, 25 miles north of Philadelphia, the company offers a full variety of laser cutting, stamping, welding, fabricating, assembly and tool and die capabilities. Providing superior customer service and support through every step of every order, you receive individualized attention and commitment to your needs from all levels of the organization. Position SummaryThe General Manager – Manufacturing is responsible for the overall leadership, operational performance, profitability, and strategic direction of the manufacturing facility. This position oversees production, quali

Royersford, PA 19468 • (15.2 miles) • Full Time • 9/21/2026

Description: JACQUET is an established market leader in the distribution of stainless steel and nickel alloys in plate and round bar. Jacquet strives to be the best supplier of stainless steel and nickel cut parts by providing high quality in-house processing. Metals are sold either as-is or cut to made-to-measure sizes using plasma machines, water jets, lasers or saws. Jacquet applications cover many industrial sectors such as the water, environment, energy, mechanical and forged metal construction, chemical and agri-food, gas processing and storage, pharmaceutical and cosmetic sectors. We have four strategically placed locations within the US including Pennsylvania, California, Texas, and Wisconsin with many more globally. We are currently seeking experienced Machine Operators for our 2n

Feasterville-Trevose, PA 19053 • (16.4 miles) • Full Time • 9/21/2026

Position Title: Production Supervisor (EVN)Classification: ExemptFull Time: YesSalary Grade:Reports To: Plant LeaderPosition Overview:We are seeking a motivated individual who is highly skilled and demonstrates self-motivation. As a ProductionSupervisor, you will play a key role in leading a team of assembly line workers to achieve production targets and uphold our commitment to delivering high-quality products. Plan and direct the efforts of Assistant Supervisors, Assemblers, and related personnel engaged in the manufacture and support roles of the production and shipment process for electrical/electronic products.Ensures adherence to safety, quality, and customer requirements. The position reports to the Plant Manager, and works closely with Purchasing, Customer Service and Engineering a

Philadelphia, PA • (19 miles) • Full Time • 9/21/2026

Company Description Turner & Townsend is a global professional services company with over 22,000 people in more than 60 countries.Working with our clients across real estate, infrastructure, energy and natural resources, we transform together delivering outcomes that improve people’s lives. Working in partnership makes it possible to deliver the world’s most impactful projects and programs as we turn challenge into opportunity and complexity into success.Our capabilities include program, project, cost, asset and commercial management, controls and performance, procurement and supply chain, net zero and digital solutions.We are majority-owned by CBRE Group, Inc., the world’s largest commercial real estate services and investment firm, with our partners holding a significant minority interes

Pottstown, PA 19464 • (19.1 miles) • Full Time • 9/21/2026

HVAC ApprenticeLocation: Pottstown, PAPay Range: $22.00 - $27.00 per hour (based on experience)Schedule: Monday through Friday, 40+ hours per weekBuild your future in the HVAC trade with New Age Air. For more than 20 years, we have earned the trust of homeowners throughout the Pottstown area by delivering dependable heating and cooling services. As our company continues to grow, we are looking for motivated individuals who want to develop their skills and build a long-term career in a high-demand industry.Why Start Your Career with New Age Air?Hands-on training with experienced HVAC professionalsClear opportunities for advancement as your skills growStable, year-round employment with an established companySupportive team environment focused on learning and successOngoing professional devel

Spring City, PA 19475 • (19.5 miles) • Full Time • 9/21/2026

Put the finishing touch on products built to perform.Hydromotion is looking for a Painter I to join our manufacturing team. In this hands-on role, you’ll prepare and professionally finish a variety of manufactured products, helping ensure every product that leaves our facility meets our standards for quality and appearance.If you have industrial painting experience, take pride in doing quality work, and enjoy working in a manufacturing environment, we’d like to hear from you.What You’ll Do Select the correct paint color and product specifications for each job.Mix and thin paint to achieve the required consistency and viscosity.Read and follow work instructions, specifications, and prints.Prepare surfaces for painting, including masking and covering areas that should not be painted.Apply pr

Bensalem, PA 19020 • (20.1 miles) • Full Time • 9/21/2026

The Bench Mechanic performs tear downs, troubleshoots, and repairs moderate to complex hydraulic, pneumatic, and electronic equipment and systems. Reports to the Cell Leader.Responsibilities:Install, repair, and perform diagnostic testing and troubleshooting of moderate to complex hydraulic, pneumatic, and electronic components or systems.When necessary, may be responsible for system/machine modifications at the job site. This includes but is not limited to material fabrication, assembly, and modification of equipment on job site assignments.Prepare detailed service reports utilizing Microsoft Office and/or ERP software. Reports will include records of materials used, hours worked, travel expenses, and other project-related data.As a representative of Airline Hydraulics, communicate profes

Trenton, NJ 08628 • (22.7 miles) • Full Time • 9/21/2026

Benefits:Dental insuranceHealth insuranceVision insuranceElectronic Soldering Assembly Technician – ManufacturingLocation: Ewing, NJ Schedule: Monday–Friday, 7:00 AM–3:30 PM About the Role We are seeking an Electronic Soldering Assembly Technician to support the production of ultrasonic transducers and electronic assemblies. This role is focused on precision soldering, wiring, board-level assembly, and electrical testing. This is NOT a mechanical assembly or tank-building position. Ideal candidates will have stable work history, strong soldering skills, and experience working in an electronics manufacturing environment. Key ResponsibilitiesPerform SMT and through-hole soldering, wiring, and PCB-level assemblyBuild and repair electronic subassemblies, wiring harnesses, and transducer compon