Gray Court, SC 29645 • (43.9 miles) • Full Time • 10/22/2026

OPERATOR The Job offer Fibertex in Gray Court, SC is currently looking for Operators for our night shift. The Operator is responsible for operating the machines, with a team; to produce quality-finished goods according to customer specifications and performance requirements. Must follow all Safety and company policies and procedures to ensure the safe performance of all assigned duties. Responsibilities Adhere to the Fibertex Nonwovens Quality Policy to ensure our products and services meet customer’s expectations. Operate production equipment within the specified limits. Monitor raw materials, product and equipment for defects or deviations. Perform routine maintenance and inspections of equipment to ensure safe, high quality, productive operation. Support a constructive team culture and

Piedmont, SC 29673 • (44 miles) • Full Time • 10/22/2026

Essential Duties and Responsibilities: Examine loom cards placed on weaving looms to determine product information, type of yarn being used and where to draw-in threads through drums, heddles and reeds. Observe threads of polyester and nylon fabrics being woven on narrow fabric looms to detect weaving defects. Examine looms to determine cause of loom stoppage, such as warp, filling, harness breaks, or mechanical defects. Tie pieces of yarn to broken end and threads yarn through drop wires, heddle eyes, and reed dents to repair warp breaks, using reed hook. Replace empty yarn spools with full ones when necessary. Verify that woven product is doffed on metal cages and replaces full cages using pallet jack. Notify Loom Technician of any mechanical defects of equipment. May assist in small loo

Lavonia, GA 30553 • (37.1 miles) • Full Time • $18.00 / hr • 10/20/2026

A day in the life In Lavonia, GA, you step onto the production floor, review the work order, and pull the right tooling. You reference prints, set your bend sequence, and dial in the press brake. A first-piece check confirms dimensions; through the shift, you keep a steady eye on accuracy and throughput, making small adjustments as needed. You coordinate with teammates to keep parts flowing, perform light maintenance to prevent downtime, document your runs, and wrap up with a spotless, safe work area. Location Lavonia, GA Core duties Configure and operate press brake equipment per job specifications and work instructions. Interpret blueprints and technical drawings to determine tooling and bend sequences. Monitor cycles to maintain quality and efficiency; adjust settings to hold dimensions

Laurens, SC 29360 • (41.7 miles) • Full Time • 10/17/2026

Description: GENERAL STATEMENT OF JOB This position is responsible for operating a variety of light equipment to maintain department facilities as well as county roads and rights-of-way. Requirements: ESSENTIAL JOB FUNCTIONS · Basic operation of a front-end loader to load trucks and move materials. · Operates a mowing tractor. · Patches pavement using tar and gravel patching machine · Operates steel wheel roller to assist in the compaction of gravel or asphalt. · Assists in the installation of driveway pipes and cross drains. · Assists in the maintenance of county bridges. · Performs daily check of oil and fluid levels and tires on equipment and machinery. · Inspect bridges and pipes on a regular schedule or after heavy rains. · Performs duties such as repairing and erecting signs and clea

Piedmont, SC 29673 • (44 miles) • Full Time • 10/17/2026

Openwork is currently engaged in a search to find a Sewing Machine Operator in Piedmont. In this Sewing Machine Operator job, you will be responsible for operating a sewing machine to manufacture pet beds and pet products. Apply today if you meet the qualifications listed below. In a Sewing Machine Operator job youll be responsible for: Read a ruler or tape measure to ensure the product is the correct size Loading thread, bobbins, and other materials, and mounting attachments like needles and cutting blades Checking for problems like thread breaks or defective stitching Keep machines stocked with thread What youll need: Ability to reada ruler or tape measure to ensure the product is the correct size Previous sewing experience Perks: Healthcare, vision and dental benefits Weekends off Contr

Williamston, SC • (37 miles) • Full Time • 10/16/2026

Openwork is currently assisting a local client in their search to fill a Production Operator job in Williamston, SC. ALL SHIFTS AVAILABLE.. As a Production Operator you will be responsible for operating machinery, assembling and packing finished goods to meet customer needs and order deadlines. Apply Now if you meet the qualifications listed below! Responsibilities for this Production Operator: - Operate press machines with automatic and manual presses - Work with semi automatic and manual welding machines - Assemble and package finished products - Perform own quality checks and make sure they meet customer specs - Ability to trouble shoot machinery - Be able to log production documentation accurately Qualifications: - Basic mechanical knowledge with strong dexterity - Ability to stand, be

Piedmont, SC 29673 • (44 miles) • Full Time • 10/15/2026

Company Description Cornerstone Building Brands is a leading manufacturer of exterior building products for residential and low-rise non-residential buildings in North America. Headquartered in Cary, N.C., we serve residential and commercial customers across the new construction and Repair & Remodel (R&R) markets. Our market-leading portfolio of products spans vinyl windows, vinyl siding, stone veneer, metal roofing, metal wall systems and metal accessories. Cornerstone Building Brands’ broad, multi-channel distribution platform and expansive national footprint includes more than 18,800 team members at manufacturing, distribution and office locations throughout North America. Corporate stewardship and Environmental, Social and Governance (ESG) responsibility are embedded in our culture. We

Hartwell, GA 30643 • (26 miles) • Full Time • 10/15/2026

Are you ready to mold yourself into something great? If you love hands-on work, enjoy a challenge, and want to be part of an energetic, forward-thinking team, then Redline is the place for you! We’re not your typical workplace we promise you’ll never be bored, and your ideas will always matter. Why You’ll Love Working Here: Amazing Teammates : Our employees are the best, and we think you’ll love working with them! Work = Fun : We make sure every day is full of energy and excitement. Flexible & Understanding : Life happens, and we get thatso we’re flexible to help you balance it all. Bonuses? Yes Please! : Crush your goals like a ninja and get rewarded! Awesome Benefits : 80hrs prorated vacation your 1st year – You can buy extra vacation days!!! / Get paid to recruit a Ninja / Onsite Nurse

Piedmont, SC 29673 • (44 miles) • Full Time • $22.16 to $25.01 / hr • 10/14/2026

Compensation: **Starting at $22.16-25.01 **(based on Relevant work experience)-Paid Weekly! Shift differential .75 cents an hour *** Available Shift: ** 12 hours, Continental schedule, Night Shift 7pm-7am, will start training on day shift** Week 1 : Monday(work), Tuesday (work), Wednesday (OFF), Thursday (OFF), Weekend (work) **Week 2: **Monday (OFF), Tuesday (OFF), Wednesday (work), Thursday (work), Weekend (OFF) Key Job Requirements: Maintain a safe, clean and friendly work environment Ensure that customer requirements are met or exceeded Perform quality measurements following SPC guideline Interpret data and make necessary machine adjustments within the process control limitations Operate and adjust machines within process limitations as directed that will produce various plastic parts,

Piedmont, SC 29673 • (44 miles) • Full Time • $20.00 to $26.00 / hr • 10/13/2026

Machine Operator/Assistant Needed 1st Shift: 8:00am - 4:00pm (Monday thru Friday) *OT as required 2nd Shift: 4:00pm-12:00am (Monday thru Friday) *OT as required We offer Medical, Dental, Vision, STD and LTD, Life Insurance, 401k and Profiting Sharing, Paid Vacation, and Holidays. As a Machine Operator/Assistant at Southeastern Paperboard, Inc., you will be responsible for the following: Inspecting machine and checking items produced for proper quality specifications. Organizing process area to increase production, reduce safety risks and improve efficiency. Working with maintenance to improve machine reliability. Load and Unload web fed paper rolls or sheets. Learn material paper grades. Operate in a safe and productive manner. _ _ * * Qualifications High school diploma or GED equivalent.

Piedmont, SC 29673 • (44 miles) • Full Time • 10/8/2026

TRC Talent is looking for a Machine Operator in Piedmont, SC! We are seeking an experienced Extrusion Blow Mold (EBM) Machine Operator to support our growing production needs. This role is critical in ensuring the efficient operation of blow molding equipment and maintaining high-quality output. Unlike general production roles, this position requires hands-on expertise in managing a complex thermal and mechanical process. The ideal candidate will have strong experience in EBM operations, machine setup, troubleshooting, and process optimization. Job Details Seeking candidates that are open to working 1st, 2nd and 3rd shift 6AM-2PM, 2PM-10PM & 10PM-6AM $20-25/hr + shift & performance premium Temp to Hire ~ 90 days based on performance What You'll Be Doing Operate and monitor extrusion blow m

Pendleton, SC 29670-9109 • (39.6 miles) • Full Time • 10/5/2026

Description: The General Mechanic – Loom Technician is responsible for ensuring all looms are operating at peak performance and per manufacturing specification. Perform all operational maintenance on looms, general machine repair, machine setup and general operation. Primary Duties Maintain, troubleshoot, and repair weaving looms in accordance with proper preventive maintenance procedures according to schedule. Perform preventative maintenance and lubrication on machinery and /or equipment according to schedule. Perform emergency/unscheduled repairs of looms during production. Work with Operators to troubleshoot and repair flagged looms. Conserve maintenance resources by using equipment and supplies as needed to accomplish job results. Read and interpret equipment manuals and work orders t

Plum Branch, SC 29845 • (29.1 miles) • Full Time • 10/3/2026

Desired Experience Production or manufacturing experience preferred Machine operation experience preferred Forklift experience preferred Salary $16–$19 per hour (nur als Beispiel – knnen wir an euren gewnschten Lohn anpassen) Benefits Paid time off Paid holidays On-the-job training Insurance benefits Short Job Description Operate and monitor production machinery Load and package materials Operate forklifts and pallet jacks Palletize finished products Maintain a clean and safe work area

Laurens, SC • (43.3 miles) • Full Time • 10/2/2026

WHO WE ARE We are a company where people matter . We are family driven . We are financially strong . And we are looking for problem-solvers to join our growing team. BENEFITS Up to 10% Retirement Contribution $600 per Year Wellness Incentive Two Weeks Starting Paid Time Off Medical, Dental, and Vision - Eligible f irst day of the month following hire date. JOIN A TOP WORKPLACE - https://www.youtube.com/watch?v=7nlFHnnfvhk PRODUCTION OPERATOR The primary purpose of this position is product manufacturing; blending and packaging. This position will uphold the Hydrite "Standards of Excellence" through continuous commitment to customer satisfaction, both internal and external. Primary responsibilities include: Active contributor and leader of Hydrite's Safety Vision, Mission and Values. Provide

Royston, GA 30662 • (33.6 miles) • Full Time • 9/25/2026

Royston LLC is the industry leader in the design, manufacture, and installation of fully integrated store interiors, with modular fixtures that are the benchmark of quality, durability, operational flexibility, and total cost of ownership. We’re known for our unmatched expertise, our state-of-the-art manufacturing systems, and our philosophy of customer-driven innovation, from concept to store-level implementation. Whether it be new stores, remodels or even special rollouts, we deliver them fast and on time with solutions that benefit retail operations and sales. Job Title: Press Brake Operator Position Summary: The Press Brake Operator is responsible for safely and efficiently operating press brake equipment to form and fabricate metal components according to specifications, drawings, and

Iva, SC 29655 • (12.3 miles) • Full Time • 10/22/2026

Graywolf Integrated Construction is seeking traveling QA/QC CWI in Iva, SC. Graywolf is a heavy industrial/commercial construction contractor that provides end-to-end solutions from design, fabrication, construction, and facility management with a footprint that is nationwide. With more than 45-years of experience in the industry, we have strong leadership and support teams who understand field servant leadership is the key to our success. We are continually BUILDING new talent while developing our current talent. As our assignments vary in duration and locations, we provide a safe and ethical environment and offer a competitive wage and benefit program. We strive to be the best contractor with demonstrating a culture of Safety, Quality and Performance to deliver the best completed project

Athens, GA 30601 • (43.5 miles) • Full Time • $17.00 to $22.00 / hr • 10/22/2026

Pay Range: $17.16hr - $22.16hr Job Overview: Performs bio-analytical methods for various Bio QC Tests on raw materials, in-process, release, or stability samples in compliance with regulatory guidelines. The candidate will initiate, execute, and complete assays per validated procedures while maintaining compliance, safety, and proper GMP documentation. Responsibilities: Performs bio-analytical methods (immunological, in vivo, microbiological, molecular biological, or virological) for various Bio QC Tests on raw materials, in-process, release, or stability samples in compliance with 9CFR, EU, and VICH regulatory guidelines, outlines of production, and special outlines. Initiates, executes, and completes assays as per validated procedures and within quality and compliance guidelines. Respons

Thomson, GA 30824 • (40.2 miles) • Full Time • $24.00 to $32.00 / hr • 10/22/2026

Position Summary: The Process Technician is responsible for working safely and for all quality, setup, production, efficiency, productivity, equipment maintenance for the entire facility. The Process Technician is responsible for ensuring the equipment for either the front half or back half of the plant is operating per the standards for each machine. The Process Technician must be able to start, changeover and operate all the extrusion machines in their half of the plant. Job Responsibilities: Read, comprehend, and follow all specifications in the job folder. Complete all required paperwork (pallet slips, job folders, any special customer requirements, and/or any other forms as assigned by the shift supervisor). Ability to start, changeover and operate all equipment for either the front h

Laurens, SC • (43.3 miles) • Full Time • $20.00 to $25.00 / hr • 10/22/2026

Job Title: Die-Cast Process Technician Industry: Automotive Manufacturing Position Level: Technical / Shift Lead Support Location: [Insert Location] Education: High School Diploma or equivalent Experience: Minimum 4 years Shift: Must be flexible to work all shifts Position Overview One of our clients in the automotive manufacturing industry is seeking a Die-Cast Process Technician to support high-pressure aluminum die-casting operations, process optimization, and quality assurance. This role is responsible for maintaining stable production processes, minimizing scrap and equipment downtime, and ensuring compliance with established safety and quality standards. The ideal candidate will have hands-on experience with high-pressure aluminum die-casting, process setup, troubleshooting, tooling

Clemson, SC • (42.6 miles) • Full Time • 10/21/2026

Work Location: Hybrid (3 days in office, 2 days remote). Candidate Location: Candidate MUST be a SC resident. No relocation allowed. Quality Assurance 9961 W2 only no subs Client is located in Columbia, SC Duration of the Contract: 12 months to start Bachelor’s degree in a technical, business, or related field. Years of experience can substitute for formal education. Required Skills 3+ years translating business requirements or policy documentation into test cases and scenarios; Document and support development of test scenarios/cases and the execution of testing activities. 3+ years building test cases and scenarios into test systems. Experience publishing status reports of all open issues and gaps found during test phase and articulate the details to Development teams. Preferred Skills T

Gray Court, SC 29645 • (43.9 miles) • Full Time • $50,000 to $60,000 / yr • 10/21/2026

Job Description: Project Coordinator Location: NC/SC Employment Type: Full-Time Reports To: Operations Manager Overview Vayan Group is seeking a Project Coordinator to support quality and containment projects at our Tier 1 NC/SC location. This role is ideal for someone with strong mechanical aptitude, experience in rework or containment, and a hands-on approach to project coordination. The Project Coordinator will oversee daily operations, ensure quality standards are met, and support site launches and small team activities. * This role will be stationed in Gray Court SC but travel around NC/SC periodically. * Key Responsibilities Coordinate and oversee quality and containment activities on-site. Support mechanical rework operations and ensure adherence to specifications. Communicate effec

Anderson, SC 29625 • (33.3 miles) • Full Time • $26.00 / hr • 10/21/2026

Paint Department Team Leader Anderson, SC | Contract to Hire | $26–$27/hour HTI is seeking Paint Department Team Leaders for an automotive supplier in Anderson, SC. This role supports daily production by providing direction to operators, promoting safe work practices, and ensuring associates have the tools and training needed to produce quality parts. This opportunity offers conversion to direct hire at three months, with a pay increase once hired on. Pay & Available Shifts Base pay: $26/hour Off-shift premium: $1/hour, bringing off-shift pay to $27/hour Available schedules: 1st shift: 4:45 AM–1:00 PM 3rd shift: 8:45 PM–5:00 AM 3rd shift: 11:45 PM–8:00 AM What’s in It for You? Competitive starting pay of $26/hour An additional $1/hour for off shifts A three-month contract-to-hire opportuni

Pendleton, SC • (39.6 miles) • Full Time • 10/21/2026

Quality Engineer – Medical Device -Contract VTI Life Sciences (VTI) is seeking a forward-thinking and ambitious Medical Device Quality Engineer looking to accelerate their careers in the pharmaceutical, biotechnology, and medical device industries. We offer an opportunity to support our teams of industry subject matter experts and thought leaders while consulting with leading companies in the Life Sciences industry. The successful candidate will lead and coordinate validation execution activities with operations and engineering teams for special processes. PROJECT OVERVIEW Location: Pendleton, SC Start date: Monday, November 2nd Length of Project: Approximately 4 months Employment Classification: Contract Inspecting, Review Protocols, Support, SOP Development, Feedback, Execution Equipment

Laurens, SC 29360 • (41.7 miles) • Full Time • $20.00 to $25.00 / hr • 10/21/2026

Job Title: Die-Cast Process Technician Industry: Automotive Manufacturing Position Level: Technical / Shift Lead Support Location: Laurens, SC Education: High School Diploma or equivalent Experience: Minimum 4 years Shift: Must be flexible to work all shifts Position Overview One of our clients in the automotive manufacturing industry is seeking a Die-Cast Process Technician to support high-pressure aluminum die-casting operations, process optimization, and quality assurance. This role is responsible for maintaining stable production processes, minimizing scrap and equipment downtime, and ensuring compliance with established safety and quality standards. The ideal candidate will have hands-on experience with high-pressure aluminum die-casting, process setup, troubleshooting, tooling coordi

Thomson, GA 30824 • (40.2 miles) • Full Time • 10/20/2026

We are currently looking for an enthusiastic & compassionate individual to add to our scheduling team. This person must be very detail-oriented, professional, have strong communication skills and be able to multi-task in a fast-pace environment. The primary role of the scheduler is to coordinator and manage the client & staff schedules to ensure that we are providing quality care. Some of the daily duties & responsibilities are as follows: Coordinate & schedule homecare services for our clients based on their needs and preferences. Communicate with clients and staff to manage their schedules. Ensure that all schedules are covered and arrange for any backup or replacement staff if needed. Maintain detailed records of services provided. Manage and resolve any scheduling conflicts promptly an

Comer, GA 30629 • (29.8 miles) • Full Time • $65,000 to $75,000 / yr • 10/19/2026

Manufacturing Engineer – Composites Manufacturing Location: Comer, Georgia Position Type: Full-Time | On-Site Department: Engineering The Opportunity R12 Talent is recruiting a Manufacturing Engineer for an established manufacturing operation in Comer, Georgia. This is an excellent opportunity for an engineer who enjoys getting involved on the production floor, solving manufacturing challenges, and developing practical solutions that improve quality, efficiency, and overall production performance. The position offers a varied mix of mechanical engineering, process development, tooling design, production support, and continuous improvement , with the opportunity to take ownership of engineering projects from initial concept through to implementation. Working closely with production, quality

Belton, SC 29627 • (30.1 miles) • Full Time • 10/19/2026

Job Title: Manufacturing Engineering Trainee Location: Simpsonville, SC; Greenville, SC; Belton, SC; Rogersville, TN; Asheville, NC; Marion, NC; Kansas City, MO Reports to: Engineering Manager Employment Type: Full Time Industry: Manufacturing | Mechanical Power Transmission Components | Engineering Services Job Function: Engineering | Process Improvement Job Summary: The Manufacturing Engineering Trainee (MET) is an entry-level manufacturing engineering position tailored for high-potential future leaders of Dodge® Industrial. This program will follow a formal and structured rotational training and development program for 1-2 years. This role will include: Assigned daily mentorship from a technical and non-technical senior leader. Pre-assigned critical hands-on manufacturing projects that

Anderson, SC 29625 • (33.3 miles) • Full Time • $80,000 to $95,000 / yr • 10/17/2026

Scope of the position: Provide Quality Assurance expertise to the Quality department and customers to ensure the Quality System is of the highest standard. Safeguard the quality of all products produced through NCR/ CAPA and complaint investigations to ensure all customer & regulatory requirements are met. Key Responsibilities: Maintain a quality system compliant to the IATF 16949: 2016 standard and all applicable regulations under associated Directives. Co-ordinate/ perform investigations on production related issues in conjunction with QC Technicians to ensure all customer & regulatory requirements are met. Lead all activities associated with open non-conformances (NCRs) & CAPAs until completion Ensure customer specific requirements are being met Establish and sustain customer relationsh

Williamston, SC 29697 • (37.1 miles) • Full Time • 10/16/2026

Job Title: Quality Inspector – Manufacturing Shift: 1st – 7:00 AM – 3:00 PM Location: Williamston, SC Schedule: 1st Shift PAY RATE: $15.50/hr (Temporary) | $16.50/hr (Upon Permanent Hire) Join our team and take the next step in your career. PPG Quality is a leading provider of manufacturing solutions, specializing in quality inspection, workforce support, and operational services for manufacturers and parts suppliers. We proudly serve industries including automotive, aerospace, medical devices, electronics, motorcycles, and food production. Headquartered in northern Atlanta, PPG Quality operates across the United States, Canada, and Mexico. We are committed to rapid career advancement and developing future leaders in manufacturing. At PPG Quality, we foster a culture of excellence, collabo

Piedmont, SC 29673 • (44 miles) • Full Time • 10/16/2026

Our client, a global automotive manufacturer, is seeking experienced Industrial Engineers to join its engineering team in Piedmont, South Carolina. This opportunity supports a growing, highly automatedmanufacturing operation producing advanced components for electric vehicle battery systems. The facility utilizes sophisticated assembly equipment, robotics, industrial camera systems, and integrated manufacturing processes. The company is seeking engineers with strong technical backgrounds in electrical engineering, mechanical engineering, automation, or industrial machine vision systems. Candidates do not need experience in every area, as the team is looking to strengthen several technical capabilities. The ideal candidate is a hands-on problem solver who understands complex manufacturing e

Thomson, GA 30824 • (40.2 miles) • Full Time • $26.00 to $37.00 / hr • 10/15/2026

Position Summary Standard Iron has been a leader in contract manufacturing for over 90 years, delivering quality products and innovative solutions to customers across a variety of industries. We are committed to our Core Values of Commitment To Our People, To Our Customers & To Action . We are seeking a dependable, experienced Manufacturing Production Welding Lead to join our production team. In this role, you will provide day-to-day leadership and support to welding employees while ensuring production schedules, quality standards, safety requirements, and customer specifications are met. The Welding Lead will work alongside the team, helping troubleshoot welding issues, support training and cross-training, monitor production, and promote a safe, efficient, and team-oriented work environme

Gray Court, SC 29645 • (43.9 miles) • Full Time • $15.00 to $16.00 / hr • 10/15/2026

TRIGO Global Quality Solutions has several immediate openings for Quality Inspectors in Gray Court, SC. Overtime including weekends is mandatory! 1st shift $15.00 an hour, 2nd & 3rd shift $16.00 an hour All schedules are on a 7 day rotation with 2 days off each week! 1st Shift 7:00am to 3:15pm 2nd Shift 3:00pm to 11:15pm 3rd Shift 11:00pm to 7:15am Overall Purpose of the Quality Inspector Provide Quality services and support for all missions assigned to a manufacturing or warehouse site while ensuring a healthy and safe work environment. Reports to Site Supervisor/Site Leaders Responsibilities (To include but not limited to the following) Client Relationship & Business Development Act as an impartial third party between the production source and the customer facility to ensure the product

Gray Court, SC 29645 • (43.9 miles) • Full Time • 10/14/2026

Job Title: Powder Coater / Finishing Technician Job Type: Full-time Monday- Friday Job Summary We are looking for a reliable, detail-oriented Powder Coater to join our production team. Whether you have basic prep experience looking to grow your skills or solid time behind a gun, pay will directly reflect your hands-on experience and capability. We offer on-the-job training to help you level up! Responsibilities Clean, mask, and prepare metal parts prior to coating (sanding, degreasing, pretreatment). Hang and remove parts from racks safely. Operate powder coating spray equipment to ensure consistent mil thickness and finish quality. Load and monitor curing ovens to ensure proper bake times and temperatures. Inspect finished products for coverage, adhesion, and visual defects. Maintain equi

Piedmont, SC 29673-8465 • (43.1 miles) • Full Time • $18.00 to $20.00 / hr • 10/13/2026

IFM Quality & Finishing Technician Join Our Team as an Integrated Facility Management (IFM) Quality & Finishing Technician We are looking for a skilled and motivated Quality & Finishing Technician to provide repair, cleaning, and preventative maintenance services for customer equipment at industrial and commercial facilities. This role is ideal for a hands-on technician with experience in industrial finishing, commercial HVAC systems, air quality, filtration, and equipment maintenance who enjoys troubleshooting problems, working directly with customers, and supporting high-quality service delivery. Key Responsibilities: Troubleshoot, diagnose, and repair customer equipment in the field. Perform preventative maintenance, cleaning, and servicing of industrial and commercial systems. Lead ind

Anderson, SC 29621 • (28.5 miles) • Full Time • 10/13/2026

Role Description: This role assists in the execution of gatherings through Audio, Video, and Lighting, ensuring distraction-free environments for worship at the Broadcast campus location for NewSpring Church. This role equips and develops Production volunteers, oversees AVL systems, and partners with campus teams to deliver excellent and meaningful worship experiences. Primary Responsibilities: Lead and recruit the development, training and sending of Production volunteers in Anderson. Lead the Production Lead Team in Anderson. Assist in the execution of Broadcast gatherings in partnership with the Worship Director and Gatherings Director. Skilled in one area of AVL, while having the ability to properly communicate the desired outcome of remaining departments and the desire and drive to gr

Athens, GA 30601 • (43.5 miles) • Full Time • $18.70 to $24.15 / hr • 10/13/2026

The CNC Machine Operator Trainee is a position designed to provide hands-on training in operating and maintaining CNC (Computer Numerical Control) machining centers. The trainee will work closely with experienced operators and supervisors to learn setup, operation, inspection, and basic troubleshooting of CNC machines. Full Responsibilities: •Sets up and operates automated CNC Vertical and horizontal machines. •Accurately locates/identifies the X, Y, Z axis on Vertical and Horizontal machines. •Performs daily point checks on assigned machines and reports concerns to supervisor; may initiate maintenance requests if appropriate. •Meets departmental/company goals and objectives promptly (i.e., efficiencies, scrap control, time motion, and setup time reductions). •Accurately interprets product

Thomson, GA • (43.7 miles) • Full Time • 10/12/2026

Who We Are: From Georgia. For Georgia. Since 1914 Yancey Bros. Co. has proudly served as the authorized Caterpillar equipment dealer for Georgia, providing our customers with the highest quality sales, parts and service. From Caterpillar heavy and compact construction equipment to on-highway trucks, we remain committed to learning more about our customers, offering equipment and support to keep up with their changing needs. This all starts with our greatest assetour employees. What You Will Be Doing: As the Rental Shop Technician you will be responsible for diagnosing and performing mechanical, electrical, hydraulic, and pneumatic repairs on a variety of rental, customer equipment, and tools. Additionally support management in the overall safety, operational workflow, improve equipment qua

Simpsonville, SC 29680 • (44.8 miles) • Full Time • $48.00 to $58.00 / hr • 10/12/2026

Job Title: Manufacturing Engineer Job Description The Manufacturing Engineer leads and mentors a cross-functional engineering team in a fast-paced manufacturing environment, driving process development, continuous improvement, and scalable production. This role focuses on optimizing manufacturing output, supporting project-based and escalated production issues, and ensuring that facility and product goals are consistently achieved. The Manufacturing Engineer works predominantly on the manufacturing floor, collaborating closely with production, engineering, quality, and operations teams to identify and address process gaps, equipment challenges, and material flow issues. The position also plays a key role in translating engineering bills of materials (EBOMs) to manufacturing bills of materi

Athens, GA 30601 • (43.5 miles) • Full Time • 10/11/2026

Job Title: Quality Control Technician III Location: Athens, GA Type: Contract Compensation: $20-$22 Contractor Work Model: Onsite – onsite Hours: 40 hours/week Overview Leading pharmaceutical manufacturing and animal health company looking for an experienced Quality Control Technician III . Ideal candidates should have experience with aseptic techniques, microbiology testing, and previous GMP experience preferably. Responsibilities Performs bio-analytical methods (immunological, in vivo, microbiological, molecular biological, or virological) for various Bio QC Tests on raw materials, in-process, release or stability samples in compliance with 9CFR, EU and VICH regulatory guidelines, outlines of production and special outlines. Will initiate, execute and complete assays as per validated pro

Anderson, SC 29621 • (28.5 miles) • Full Time • 10/8/2026

Key Job Functions: Serve as lead auditor for ISO-9001 Train staff and operations in Quality Standards Identify, document, and communicate the dimensional and appearance Key Characteristics (KC) of each assigned product. This includes customer dictated KCs and those identified by MBC. Work with engineering in the development of gauges and fixtures to control dimensional KCs. Assist operations in the training of employees in the use of all gauging and fixturing. Collect product quality data and maintain charts on Key Performance Indicators (KPI), to include First Pass Yield (FPY), Defects Per Unit (DPU) and Delivered PPM (DPPM). Regularly post KPIs on communication boards in the operating areas, including posting of customer feedback (VOC) and quality alerts. Work with engineering and operat

Hartwell, GA 30643 • (26 miles) • Full Time • $14.00 to $18.00 / hr • 10/6/2026

We are seeking a dependable and experienced Commercial Embroidery Machine Operator to join our production team. Schedule: Monday–Friday, 8:00 AM–4:30 PM. Pay: $14.00–$18.00 per hour, depending on experience Job Type: Full-Time No nights or weekends. We are looking for someone who takes pride in producing high-quality decorated apparel, works efficiently in a fast-paced production environment, and understands the importance of accuracy and meeting customer deadlines. Responsibilities Set up and operate commercial multi-head embroidery machines Embroider polos, jackets, hats, bags, uniforms, and other promotional apparel Load embroidery files and select proper thread colors Hoop garments accurately and efficiently Select appropriate backing, stabilizers, needles, and other materials Perform