Pay starts at $18.00 an hour and goes up depending on experience.
Our ideal candidate should have previous experience as a mechanic/technician in the trailer industry. Carpentry, welding and mechanic skills are a plus. We are looking for a self-motivated person with strong work ethics. We are willing to train the right applicant.
Duties will include: Read and understand the jobs and work order per company standards Preventative maintenance and repair all systems on Semi-Trailers to meet the standards set forth by DOT Remove and replace brakes, brake drums, hubs, seals, bearings, races and associated parts Repair electrical and lighting systems Repair or replace chassis components such as springs, spring hangers, equalizers, complete slider assemblies, axles, and sub frames Repair mud flap brackets and dolly leg assembles Repair or replace flooring, rub rails, doors and door trim Repair roofs, panels, nose panels, lower and upper rails Conform to all safety and health standards Assist fellow mechanic technicians
Benefits: Paid time off Paid holidays 401 Medical, Dental, Vision Life Insurance Long and Short Term Disability
Requirements: 1 - 3 years of experience in trailer repair or equivalent experience with welding, carpentry, and mechanic skills Valid driver’s license with a safe driving record. Must furnish own basic hand tools. Ability to stand, walk, bend, crouch, stoop, reach, stretch, step, climb, and / or sit frequently and lift heavy (up to 60lb) throughout the duration of the day Ability to work independently with minimal supervision Attention to detail and highly organized

Direct hire for a Full Time, onsite Equipment Service Mechanic to maintain our Fleet of Electric Forklifts, Pallet Jacks, and Floor Scrubbers for Amigos Meat Distributors Houston Facility. About 90% of our Forklift / Pallet Jack Fleet is electric, and 10% propane powered. The ideal candidate will be able to Troubleshoot, diagnose, and repair Crown models. Includes propane, electric motors, small motors, transmissions, drive axles, differentials, hydraulic systems, brake systems, steering systems, electrical systems, and lifting systems.
Salary range of $800/wk to $1000/wk depends on demonstrated knowledge, skills, abilities and verifiable work experience.
This is an immediate need, direct hire position with Amigos Meats. Your résumé goes directly to the hiring manager. All qualified candidates will be contacted.
Job Responsibilities include but are not limited to: Troubleshoot, diagnose and repair all Fleet Equipment Perform all assigned planned equipment maintenance services Maintain a service log and equipment cabinet of inventory Process paperwork after completion of each job Perform regular routine equipment inspections to identify potential problems and safety concerns and document. Manage your time and work schedule
Schedule: 8-hour shifts M-F Day shifts Weekends (work every other Saturday 8a-12p)
Benefits: Full Medical Dental Vision 401K w/ co. match Vacation Time Sick Time Holiday Pay Short-Term/Long-Term Disability
Qualifications: Minimum 2 years experience as a Forklift repair technician, GSE Technician, or small engine repair technician. Good Mechanical and electrical aptitudes, knowledge of electrical and electronic systems, internal combustion engines, and hydraulic systems. Good written/verbal communication and customer care skills Valid driver's license, good driving record and ability to safely operate lift trucks. Technical degree, previous forklift repair experience, welding experience and knowledge of various types of testing equipment preferred. Salary offered commensurate with knowledge, skills, abilities and verifiable work experience.
Amigos is an Equal Opportunity Employer.

Pol-Tex International, a division of Poly-America, L.P., is currently seeking an Industrial Mechanic to join our maintenance team. Pol-Tex International’s mission is to be the safest and most efficient choice in the polyethylene recovery, recycling, and compounding industries.  Our fleet, facility, and equipment combined with our experienced and dedicated professional staff make Pol-Tex International the premier gathering and recycling center for the Gulf Coast Region. Pol-Tex International offers competitive compensation packages including Medical/Dental, paid vacations and holidays, and 401(K). Responsibilities Industrial Mechanics at Pol-Tex International are responsible for the maintenance, installation, troubleshooting, and modification of new and existing industrial converting equipment. This role will document, recommend, and execute maintenance procedures. The Mechanic will be working in a manufacturing maintenance team. At times they will complete the mechanical testing of electro-mechanical equipment. Tasks include replacing, inspecting and dismantling defective parts, and implementing upgrades and part changeovers. The role may involve additional responsibilities and opportunities as they become necessary and/or are assigned by management.
The ideal candidate will possess: Some experience performing troubleshooting functions in a manufacturing environment. A strong desire to be hands on with their work and to follow processes through. The aptitude and desire necessary to be a good student of Pol-Tex processes, equipment, and procedures. Problem solving skills including troubleshooting of mechanical equipment.

Provide motor vehicle maintenance for the school bus, general purpose, and utility vehicle fleet.
Job Duties: Diagnose and repair all types of mechanical and electrical problems on school buses and all types of motor vehicles. Be the primary technician assigned to perform preventative maintenance and repairs, both major and minor for 20 School Buses and 20 Support Vehicles. Secure and maintain all assigned tools, parts and equipment. Substitute for any transportation employee as assigned by the supervisor. Maintain accurate records of all work performed. Comply with all safety measures and maintenance procedures as outlined in the department handbook. Substitute as a school bus driver when necessary. Perform other duties as assigned. Operates pressure washers, air compressor, tire machines, wheel balancer, bead setter, air jacks, air tools, grease guns and wrecker.
Qualifications: Minimum Education/Certification High School Graduate or GED. ASE Certification preferred. Must have five years experience working on trucks or buses. Must show proficiency and initiative as an expert mechanic. Possess or be able to obtain valid Class B Texas Commercial Driver’s License with all appropriate endorsements to drive a school bus within 120 days. Possess or be able to obtain valid Class A Texas Commercial Driver’s License will all appropriate endorsements to drive the district wrecker within 180 days. Be able to obtain a Vehicle State Inspection License.
Special Knowledge/Skills: Ability to read and comprehend vehicle maintenance manuals. Ability to operate all types of vehicle maintenance equipment.
The above statements are intended to describe the general purpose and responsibilities assigned to this job and are not intended to represent an exhaustive list of all responsibilities, duties and skills required.

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: The Field Service Technician installs, commissions, monitors, troubleshoots, and repairs Flowserve’s pumps, seals, and other equipment across industries such as oil and gas, chemical, nuclear, coal, and wastewater industries, depending on the customer engagement. In this challenging position the Field Service Technician (FST) provides real-time technical support to our customers, and provides recommendations for repairs, upgrades, and replacement equipment. The FST is actively engaged in troubleshooting problems and implementing solutions onsite at nearby customer facilities. Our Field Service Technician team is the face of Flowserve, and we count on them to deliver a world-class service to our customers, creating a lasting competitive advantage for our products and services. Responsibilities: Make direct, in-person service calls in response to customer requests.Assess mechanical problems and take actions to resolve promptly.Work side-by-side with our customer’s personnel, and lead work crews as required.Oversee the full cycle of repair: disassembly, cleaning, inspection, repair, and assembly.Ensure that equipment is installed successfully and on schedule.Check equipment prior to start-up and assess start-up performance.Monitor the maintenance and performance of Flowserve equipment.Train customers in the proper procedures for operating and maintaining Flowserve products.Collaborate effectively with the supporting organizations of Flowserve, including the repair centers, customer service, and sales engineering.Maintain and submit organized, accurate records, including daily reports, jobs quoted, jobs performed, and time and materials charged.Knowledgeable about the industrial applications and operations of pumps, valves, seals, actuators, and mechanical equipment.Experience with installing mechanical equipment.Experience with repairing pump equipment, installing mechanical seals, changing seal faces/gaskets/O rings.Proven ability to correctly read and interpret blueprints, engineering drawings, and schematicsMust be a self-starter with good follow-through, capable of working independently with little supervision.Capable in Outlook, Word, and ExcelAn active driver’s license with a good driving record is essential to the role.Able to travel, including globally, for extended periods of timeAble to work overtime as required to minimize impact to customersPhysical activity is required, including frequent lifting up to 50 pounds / 25kg, ascending/descending ladders and staircases, and climbing and reaching in, under, and around large equipment, often outside year-round.Excellent communication skillsGood organizational skillsCommunicate by word and actions Flowserve’s values for ethics, safety, and qualityOther duties as assigned. Requirements: Professional certifications in this field.Experience working with ValuesAbility to work collaboratively with unfamiliar teams.HS Diploma / GED and 3-5 years relevant experience Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits Req ID : R-12061 Job Family Group : Operations Job Family : OP Field Service EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

Req ID:451043Address: 2110 E I-10 Baytown, TX, 77520Benefits:* Fuel Your Growth with Love's - company funded tuition assistance program * Paid Time Off * Flexible Scheduling * 401(k) – 100% match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Welcome to Love’s!Diesel Technicians work in a fast-paced environment and maintain clean places with friendly faces. You will interact with customers & drivers from all over, making their travels and their day better. Job Functions: Troubleshoot and repair light mechanical issues that may include wheel-end assemblies, electrical systems, suspensions, A/C, or engine componentsAssist customers with roadside servicesProvide preventative maintenance servicesAbility to move, lift 75+ pounds working in close quarters. Ability to work in various temperatures.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Work a rotating schedule that alternates between day and night as needed.Ability to obtain a medical card through the Department of Transportation. (paid by Love’s) Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

Overview: ConGlobal is hiring immediately for a key position within our global supply chain. We offer great benefits, competitive pay and opportunities for future career growth. The starting pay is $30.00-34.00!#PR Responsibilities: As a Heavy Equipment Mechanic, you are responsible for assessing and repairing heavy duty lift equipment at the railyard as well as performing maintenance and mechanical repairs on side loaders (loaded container handler), hostlers (semi tractor), forklifts and support equipment. Qualifications: 1-3 years of heavy equipment mechanic / service technician experience requiredPrevious crane mechanic experience a plusHydraulic systems experience required (pumps, valves, motors, filters, and hoses)Driveline component repair experience (axles, bearings, ring, etc.)Ability to work in various weather conditionsAbility to work in a safety focused environmentAbility to lift 50lbsMust have a Valid Driver’s LicenseMust pass a pre-employment background verification, physical and drug screening.The Federal Rail Administration sets and enforces safety regulations and standards for railroad operations. Use of cannabis is strictly prohibited. If applicable for the position you are applying to, and if you are offered the position, you will have to take and pass a drug screen.We offer competitive pay, medical/dental/vision benefits, 401(k), paid training, career advancement and more.

Job DescriptionUnleash your potential with the Johnson Controls team!As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!What you will doWe are looking for a skilled Journeymen Chiller Mechanic who has worked in commercial, industrial, and/or institutional markets to join our team. Candidates should have a minimum of five years’ chiller experience, with knowledge of maintenance procedures, troubleshooting, and rebuilds of medium-large tonnage chillers of all brands.How you will do itYou will be assigned primary service accounts and responsibility for executing contract maintenance visits, inspections, site assessments, service requests and recommending necessary upgrades or repairs in order to prolong the equipment life cycle of our customers equipment.You will establish & maintain a positive relationship with customers, vendors and co-workers through effective oral and written communication skills via phone, computer, and face to face.You will be expected to provide quote estimates for labor & material repairs and upgrades as needed.You will represent the company by serving as the direct customer contact and be responsible for servicing products and equipment on assigned projects, ensuring customer satisfaction by identifying, analyzing, diagnosing and repairing equipment and systems at customer’s location.You will be required to use cutting-edge software and technology, along with a variety of hand-tools, rigging equipment, following blueprints or engineering specifications, to diagnose and repair equipment.You will be expected to continually enforce safety to the highest standards and maintain security and accountability of company issued and procured assets by recording use, wear and conditions.You will be expected to work as part of a team who is dedicated to delivering the highest standard of service to all its customers which may require the flexibility to work overtime and weekends as the business requires, including occasional overnight stays.You will be added to our on-call rotations, since we are a 24/7 service company.What we look forRequiredThree years of commercial, industrial, and/or institutional experience with all types of chillers, various compressor technologies, chiller control systems, and speed drives.Requires Mechanical Journeyman status.Member of Local Union 286 or willing to join.Operating knowledge of Microsoft Office software and working proficiency with handheld computers (i.e. smartphones, iPads).Adherence to company safety program.Valid driver's license.Appropriate licenses to work with refrigerant, boiler, and steam operational & service knowledge.EPA Universal Refrigerant Certification.Good verbal and written communication skills.Must be able to be on call nights and weekends on a schedule-rotating basis.PreferredMore than 5 years of commercial, industrial, and/or institutional experience with all types of chillers, various compressor technologies, chiller control systems, and speed drives.**This is a Bargaining Unit Position.

Equipment Mechanic (not heavy) We are seeking an energetic Equipment Mechanic to join our La Porte, TX team, who can change direction at a moment’s notice to maintain all mobile equipment to include but not limited to repairs, diagnosis, and troubleshooting. Performs daily preventative maintenance as assigned by supervisor. Health and Safety is our #1 priority and we live it 3-6-5!Competitive pay and benefitsComprehensive health benefits coverage after 30 days of full-time employmentGroup 401K with company matching componentOpportunities for growth and development for all the stages of your careerGenerous paid time off, company paid training and tuition reimbursementPositive and safe work environmentsEnsures Health and Safety is the number one goal by following policies, processes, and acting in a safe manner at all timesDisassemble/Reassemble heavy and mobile equipment to troubleshoot, diagnose and repairFabricate metal pieces and replace gaskets as neededTroubleshoot, repair and test all equipment to ensure functionalityUtilize propylene cutting rigRepair equipment using MIG and/or stick weldingOther duties as assignedEnter data for repairs, diagnosis, preventative maintenance, inventory check out and timeComplete daily work and training on computersWhat does it take to work at Clean Harbors High School Diploma or equivalent3+ years’ experience with mobile equipment repairDiesel Certification requiredAir Conditioning Certification or equivalent requiredCaterpillar or Kubota certifications or education a plus!Hydraulics Systems repairMust understand schematics to troubleshoot 12&24v systemsAbility to use a cutting rig (propylene cutting torch)Valid Drivers’ LicenseComputer literateJoin our team today! To learn more about our company, and to apply online for this exciting opportunity, visit us athttps://careers.cleanharbors.com/Clean Harborsis the leading provider of environmental, energy and industrial services throughout North America. The Company serves a diverse customer base, including a majority of the Fortune 500 companies, thousands of smaller private entities and numerous federal, state, provincial and local governmental agencies. Through its Safety-Kleen subsidiary, Clean Harbors also is a premier provider of used oil recycling and re-refining, parts washers and environmental services for the small quantity generator market. Headquartered in Norwell, Massachusetts, Clean Harbors has waste disposal facilities and service locations throughout the United States and Canada, as well as Mexico and Puerto Rico.We are an equal opportunity in employer to all individuals regardless of race, color, religion, sex, age, national origin, pregnancy, familial status, disability status, veteran status, citizenship status, genetic information or any other characteristic protected under Federal, State or Local law.Clean Harbors is a Military & Veteran friendly company.*CH #LI-MM1

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Customer Product Repair Mechanic-First shift position, Overtime required Role Summary: The Customer Product Repair Mechanic is responsible for all processes related to disassembly, repair, and assembly of a range of equipment/products including but not limited to rotating equipment, of high energy electric actuators, pumps, small compressors, and decoking equipment. The CPRM will work with team leads to execute work as provided on work instructions, routers, drawings, and checklists. The CPRM independently selects and uses inspection equipment to check dimensions of all critical components during the assembly and repair process and gives a written description of the wear and condition of critical components. This position also ensures all forms and documentation are complete prior to submission of quotation. The CPRM will also be responsible to paint, install all tagging, and prep the equipment prior to shipment to the customer. Responsibilities include: Follow pre-job brief, Return Goods Policies, and checklists prior to DCI and assembly.Work on API PumpsAbility to independently, inspect, repair, and assemble, components and equipment, and accurately complete all required documentation.Take pictures of the DCI process as instructed on the DCI checklist; properly clean each component for reuse and write the condition of components on all DCI documentation.Interface with service coordinator, production planners, and customer to discuss the condition of all critical components when applicable.Follow all routers and assembly procedures.Inspect all components for critical fits and run-outs and document each number on the appropriate assembly form.Take pictures of the assembly process as instructed on the assembly check list.Significant experience with the proper and safe use of various common power and hand tools needed for assembly.Utilize torches (and other heat sources) and liquid nitrogen properly and safely in the assembly process.Run balance machine to proper balance rotating components and assemblies.Conduct low pressure air tests and high-pressure hydrostatic tests.Inspect and verify quality of finished and in-process work with precision measurement tools (i. e. micrometers, dial indicators, calipers, etc.).Accurately set up and read precision measuring instruments such as micrometers, dial indicators, calipers, and other gauges.Ability to work efficiently within fixed time windows for each manufacturing process.Communicate clearly to peers and supervisors any related job issues.Coordinate and interface with sales, operations, engineers, and customers as necessary.Paint when required, tag, and prep equipment prior to shipment to the customer.Utilize cranes, lifting devices, and fork trucks.Willing to provide input on work process improvement and on developing new tools and hardware as part of on-going Continuous Improvement projects.Work safely while helping colleagues work safely and utilizing Stop Work Authority when appropriate Requirements: 5 plus years relevant experienceAble to read and interpret prints, shop drawings, assembly checklists, and other written work instructions.Must be able to stand for long periods of time and lift up to 25 pounds with a full range of hand and upper-body motion to work with tools and partsMust be able to work overtime, weekends, and holidays as the business dictates.Must own set of personal SAE hand tools and measurement instruments (micrometers, dial indicators, calipers, etc.) and a roll-around toolbox.Comply with all Flowserve policies and procedures. Preferred Experience / Skills: Ability to understand work instructions, safety procedures, and company policies.Electrical wiring experience or mechanical assembly experienceExcellent communication skills both written and verbal.Excellent organizational skills, able to problem solve, and prioritize work assignments.Prior experience working the fast-paced and unpredictable environment around repair services.Demonstrate a desire for personal growth and career development.HS Diploma / GED Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits! Req ID : R-11929 Job Family Group : Operations Job Family : OP Repair Mechanic EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

Job DescriptionUnleash your potential with the Johnson Controls team!As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offer:Competitive pay, based upon the UA Local 211 rates.Comprehensive benefits package provided by the UA Local 211.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.Company vehicle, tools, and equipment provided to complete all jobs.Scheduling and management support.JCI Employee discount programs (The Loop by Perk Spot).What you will doThis is an embedded technician position – in Deer Park area.We are looking for a skilled journeyman chiller mechanic who has experience with industrial processed equipment.We provide factory certification through our Service Technical Academy (STA) with recognition, monetary rewards, and advancement. We offer incentive programs and a #1 focus on employee safety. We also provide tools, cell phones, uniforms, and a company vehicle to perform your job and service our customers to the highest standard.What we look forRequiredMust be a member of or willing to join the local United Pipefitters Association (UA Local 211).Journeyman status required.Minimum of 5 years of practical working experience with strong HVAC/ mechanical troubleshooting experience.You may be required to pass a knowledge examination to assess proficiencies.Attention to detail through interpersonal, digital, and written skills.Self-starter with a passion/ desire to learn and apply on the job.Prioritize safety in all forms.Universal EPA refrigerants license, applicable state or local licensing, and valid driver's license.Must be willing to participate in on-call rotation schedule.TWIC card – or be able to obtain one.ISTC basic – or be able to obtain one.

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: The Customer Product Repair Mechanic is responsible for all processes related to disassembly, repair, and assembly of a range of equipment/products including but not limited to rotating equipment, of high energy electric actuators, pumps, small compressors, and decoking equipment. The CPRM will work with team leads to execute work as provided on work instructions, routers, drawings, and checklists. The CPRM independently selects and uses inspection equipment to check dimensions of all critical components during the assembly and repair process and gives a written description of the wear and condition of critical components. This position also ensures all forms and documentation are complete prior to submission of quotation. The CPRM will also be responsible to paint, install all tagging, and prep the equipment prior to shipment to the customer. This is a Night shift- Overtime required Responsibilities & Requirements : Follow pre-job brief, Return Goods Policies, and checklists prior to DCI and assembly.Ability to independently, inspect, repair, and assemble, components and equipment, and accurately complete all required documentation.Take pictures of the DCI process as instructed on the DCI checklist; properly clean each component for reuse and write the condition of components on all DCI documentation.Interface with service coordinator, production planners, and customer to discuss the condition of all critical components when applicable.Follow all routers and assembly procedures.Inspect all components for critical fits and run-outs and document each number on the appropriate assembly form.Take pictures of the assembly process as instructed on the assembly check list.Significant experience with the proper and safe use of various common power and hand tools needed for assembly.Utilize torches (and other heat sources) and liquid nitrogen properly and safely in the assembly process.Run balance machine to proper balance rotating components and assemblies.Conduct low pressure air tests and high-pressure hydrostatic tests.Inspect and verify quality of finished and in-process work with precision measurement tools (i. e. micrometers, dial indicators, calipers, etc.).Accurately set up and read precision measuring instruments such as micrometers, dial indicators, calipers, and other gauges.Ability to work efficiently within fixed time windows for each manufacturing process.Communicate clearly to peers and supervisors any related job issues.Coordinate and interface with sales, operations, engineers, and customers as necessary.Paint when required, tag, and prep equipment prior to shipment to the customer.Utilize cranes, lifting devices, and fork trucks.Willing to provide input on work process improvement and on developing new tools and hardware as part of on-going Continuous Improvement projects.Work safely while helping colleagues work safely and utilizing Stop Work Authority when appropriate.Ability to understand work instructions, safety procedures, and company policies.Comply with all Flowserve policies and procedures.Must own set of personal SAE hand tools and measurement instruments (micrometers, dial indicators, calipers, etc.) and a roll-around toolbox.Able to read and interpret prints, shop drawings, assembly checklists, and other written work instructions.Basic computer skills including understanding of Microsoft Office PackageAbility to prioritize and manage multiple tasks in a fast-paced and changing work environment.Attention to detail and process-oriented mindset with results driven background.Electrical wiring experience or mechanical assembly experience.Must be able to stand for long periods of time and lift up to 25 pounds with a full range of hand and upper-body motion to work with tools and parts.Must be able to work overtime, weekends, and holidays as the business dictates.Other duties as assigned.1st or 2nd shift available Preferred Experience / Skills: Multistage pump assembly experience, API BB3/BB5".Excellent communication skills both written and verbal.Excellent organizational skills, able to problem solve, and prioritize work assignments.Prior experience working the fast-paced and unpredictable environment around repair services.Demonstrate a desire for personal growth and career development.High School Diploma / GEDPrevious experience assembling API pumps Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits Req ID : R-11930 Job Family Group : Operations Job Family : OP Repair Mechanic EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.