Fort Worth, TX • (44 miles) • Full Time • 9/10/2026

Job SummaryWe are seeking an experiencedComputer Engineerto support IT systems in apharmaceutical manufacturing environment. The role focuses on maintaining reliable, secure, and compliant IT and manufacturing systems that support production, quality, and regulatory requirements.ResponsibilitiesSupport and maintain IT systems used in pharmaceutical manufacturing and quality operations.Provide technical support for systems such asMES, ERP (e.g., SAP), LIMS, and QMS.Ensure IT systems comply withGxP, FDA 21 CFR Part 11, and data integrity requirements.Participate incomputer system validation (CSV)activities including documentation and testing.Manage servers, networks, databases, and virtualization environmentsImplement user access controls, backups, cybersecurity, and disaster recovery.Troubl

Fort Worth, TX • (44 miles) • Full Time • 9/6/2026

Flight Control Systems Engineer consultantThe key points the CM needs K doing are below. The aircraft will be for a futuristic Urban Air Taxi aircraft.1) Design and test of a Fly-by-Wire Flight Control Systems (FCS) with embedded software and complex hardware in a rapid development environment within a relatively small team working on cutting edge aerospace technology.2) Development of systems architecture, system and software design, redundancy management, electronic hardware design and integration, input sensor design and integration, and actuator design and controls integration3) Development of unique air vehicle control mechanisms, autonomous systems and control algorithms, and flight control law integration.4) Requirements management, systems specifications, interface management, syst

Fort Worth, TX • (44 miles) • Full Time • 9/6/2026

We are seeking a Quality Engineer to join our team! You will be responsible for the design and development of intelligent systems and industrial systems control.Responsibilities:Create and improve automated systems and processesSupport the installation of both mechanical and controls upgradesConduct cost-analysis to determine advantages of system improvementsResearch and implement new machinery and controlsCoordinate with specialist departments on the mechanical design of smart devicesDocument all technical procedures and user guidesQualifications:Previous experience in mechatronics engineering or other related fieldsFamiliarity with intelligent and industrial systemsFamiliarity with CAD or other related softwareStrong analytical and critical thinking skillsDeadline and detail-oriented\nCo

Fort Worth, TX • (44 miles) • Full Time • 9/4/2026

Position SummaryThis senior technical role designs, develops, modernizes, and scales enterprise software platforms. The Senior Software Engineer leads full-stack development, application modernization, CI/CD and enterprise integrations, and responsible AI-assisted engineering. Working with business stakeholders and IT leadership, the role delivers secure, high-performing, maintainable solutions and provides technical leadership across architecture, modern .NET development, APIs, cloud integration, database optimization, DevOps, security, and software delivery.Reports To: Vice President of Information TechnologyLocation: (In-Person/Onsite) 4350 Fossil Creek Blvd., Fort Worth, TX 76137Business Hours: In-Person, Monday-Friday, 8:00 AM-5:00 PMBenefitsMedical, Dental, Vision and Life Insurance

Millsap, TX 76066 • (42.1 miles) • Full Time • 9/2/2026

The GEODynamics’ Mechanical Engineer is responsible for the research and development programs to meet organizational needs and capitalize on the design of new downhole tool products, developing new technologies and improving existing processes.KEY ACCOUNTABILITIESDesign and implementation of cost-effective equipment modifications to help improve safety, reliability and throughput.Develop a project specification with colleagues, often including those from other engineering disciplines - developing, testing and evaluating theoretical designs.Discuss and solve complex problems with manufacturing departments, sub-contractors, suppliers and customers.Make sure a product can be made again reliably and will perform consistently in specified operating environments.Manage projects using engineering

Fort Worth, TX • (44 miles) • Full Time • 9/2/2026

1. Controls EngineerJob Title: Controls Engineer Company: Bright IA – Intelligent Automation Location: Fort Worth, TX (on-site + regional client sites) Type: Full-timeAbout Us Bright IA is a controls and robotics system integrator and machine builder serving manufacturers across the Dallas–Fort Worth area and the Southwest U.S. We're a FANUC Authorized System Integrator, KUKA Partner, Rockwell expert integrator, and CODESYS System Partner. We deliver engineered, turnkey automation built on honesty, precision, and high performance.The Role We're looking for a hands-on Controls Engineer to design, program, and commission industrial control systems from concept through on-site startup. You'll own the controls side of projects across robotics work cells, motion systems, and full production lin

Fort Worth, TX • (44 miles) • Full Time • 9/2/2026

Job SummaryWe are looking for a hands-on Engineering Technician with knowledge of both computer hardware and software. This position supports engineering by troubleshooting, repairing, testing, and improving computer systems and components. The ideal candidate is comfortable working with hardware, using software tools, analyzing data, and helping identify and resolve technical issues.Key ResponsibilitiesTroubleshoot, test, assemble, maintain, and repair computer systems and components.Diagnose hardware and software issues and identify effective solutions.Assist engineers with research, development, testing, and technical projects.Perform quality-control testing and collect/analyze test data.Support system testing, requirements analysis, and implementation.Use SQL and database tools to retr

Fort Worth, TX 76126 • (32.1 miles) • Full Time • 8/29/2026

Position Overview: Engineer (Full Time)Alpine Polytech is an ISO/IEC 17025:2017 accredited materials and equipment performance testing laboratory that leads the industry in characterizing material lifetimes and performance in harsh environments. We specialize in both standardized and customized testing solutions for oil and gas, energy, aerospace, automotive, and other advanced industries, often evaluating tools and equipment under extreme pressure, temperature, and chemical exposure.We are seeking an Engineer to join our highly technical team and help design, execute, and interpret mechanical and environmental test programs. In this role, you will use your engineering expertise to operate advanced lab equipment, manage test proposals and costing, and deliver clear, data-driven reports tha

Fort Worth, TX • (44 miles) • Full Time • 8/27/2026

About Basic IDIQEstablished in 2002, Basic IDIQ provides construction, renovation, maintenance and repair services for federal and state agencies, educational institutions and municipalities through IDIQ and Job Order Contracting programs.We are committed to safety, quality, efficiency and timely project delivery. We also invest in our employeesif you are willing to put in the work, we are willing to provide the training needed to help you grow as a construction professional.Position SummaryBasic IDIQ is seeking an experienced and highly organized Construction Project Engineer to assist in and manage multiple fast-track, multi-discipline projects from RFP through final closeout. This position requires strong leadership, urgency and the ability to maintain positive relationships with client

Mansfield, TX • (39.3 miles) • Full Time • 8/26/2026

Tired of Sitting at a Desk All Day Tracing 2D Blueprints?If you are a skilled CAD Drafter who feels stuck in a cubicle, micromanaged, or divorced from the actual machinery you designit is time for a change.At Sentrimax Centrifuges, we don’t want CAD operators who just push buttons. We are looking for a true mechanical problem-solver. Someone who wants to step onto the shop floor, put their hands on real-world industrial rotating equipment, grab a micrometer, and solve fitment puzzles that keep heavy industry running.If you know how metal gets cut, love reverse engineering physical parts into clean SolidWorks models, and want to work in an environment where your work directly impacts shop production every single day, let’s talk.Why Top Drafters Make the Switch to Sentrimax:No Cubicle Confin

Fort Worth, TX • (44 miles) • Full Time • 8/25/2026

Looking for experienced CAD drafter using AutoCAD for a cooling tower manufacturing company. Structures are of mostly fiberglass construction requiring typical post & beam connection details. Concrete structures.Experience with 3-D modeling a plus.\nCompany DescriptionStable company with 40 years experienceCompany DescriptionStable company with 40 years experience

Fort Worth, TX 76107 • (40.7 miles) • Full Time • 8/22/2026

Civil Project EngineerOverview Gessner Engineering is looking for a motivated Civil Project Engineer to join our dynamic team. You will support and lead design efforts for a variety of projectsincluding parking lots, roadways, grading, drainage, and utility layoutswhile collaborating with clients, MEP, landscape and architectural consultants, and internal teams to bring creative, buildable solutions to life.Key ResponsibilitiesSupport and lead civil design projects from concept through construction.Develop site layouts, grading, drainage, and utility designs using Civil 3D.Coordinate directly with clients, consultants, and review agencies.Prepare construction documents, perform QA/QC reviews, and ensure deadlines are met.Conduct site visits and assist with construction administration tasks

Arlington, TX 76001 • (40.9 miles) • Full Time • 9/14/2026

Job Title: Distribution Field TechnicianJob DescriptionWe are seeking a Distribution Field Technician to work on joint use projects in the field. The role involves data entry and documentation of installations, as well as collaboration with construction crews and engineers. The technician will perform field technical services for the operation, inspection, and maintenance of electrical distribution systems.ResponsibilitiesDocument utility installations in the field using a laptop and ensure accuracy.Collaborate with contract services crews and field construction coordinators.Perform system inventories and audits, joint use management, and permitting.Conduct sub-surface and pad-mount inspections, ground-line pole inspections, and metering services.Conduct lighting audits and field data coll

Fort Worth, TX 76107 • (40.7 miles) • Full Time • 9/3/2026

We are looking for an experienced Systems Engineer to join a dynamic energy organization in Fort Worth, Texas. This position supports a predominantly on-premises infrastructure that underpins essential corporate and field operations, requiring a well-rounded, detail-oriented individual who can navigate networking, systems administration, security, and user support. The ideal candidate brings a hands-on approach, strong technical judgment, and the ability to work effectively with a wide range of stakeholders in a fast-paced environment. Responsibilities: • Manage and resolve issues across Cisco-based network environments, including routing, switching, configuration updates, and failover-related events. • Oversee core Microsoft infrastructure services such as Active Directory, Group Policy,

Fort Worth, TX • (44 miles) • Full Time • 8/27/2026

Roles and Responsibilities• Maintain and oversee the site's Quality Management System, ensuring full compliance with company quality standards, ISO-9001, and all quality management certifications• Develop and implement Quality Improvement Plans targeting Zero Defects, Zero Quality Escapes, and reduction of Cost of Quality (COQ)• Conduct regular process audits in fabrication, assembly, and manufacturing shops, as well as functional areas including procurement, planning, and customer service• Coordinate and lead internal and external audits, managing the resolution of all findings through root cause analysis and corrective action implementation• Manage the complete NCR (Non-Conformance Report) process including tracking, trending, reporting, and leading Material Review Board activities• Deve

Arlington, TX 76001 • (40.9 miles) • Full Time • 8/18/2026

Copilot said:Field Security Technician Location: DFW AreaPosition Type: ContractExperience Level: IntermediateJob Description We are seeking a Field Security Technician to support physical security technology across multiple healthcare facilities throughout the DFW area. This role combines desktop support, access control management, security camera support, and hands-on field service work. The ideal candidate will have strong troubleshooting skills, excellent customer service abilities, and experience working with security-related hardware and technology.Responsibilities Support and troubleshoot access control systems, badge readers, and security camera technology.Assist with managing facility access and security entry points.Install, relocate, and maintain security hardware and equipment.

Aledo, TX • (35.3 miles) • Full Time • 9/14/2026

Job Title Civil / Structural Drafter (AutoCAD, Civil 3D, Revit) – Temp-to-Perm Company Overview We are a growing civil/structural engineering firm specializing in water and wastewater infrastructure, excavation support systems, and earth-retaining structures. Our projects include treatment plants, pipelines, contractor delegated connection designs, temporary shoring systems, and permanent retaining walls for public and private clients. Position Summary We are seeking a Civil / Structural Drafter with strong skills in AutoCAD, Civil 3D, and Revit for a temp-to-permanent role focused on water/wastewater and structural support projects. The successful candidate will support engineers in preparing detailed drawings and models for contractor delegated designs, excavation support, and retaining

Fort Worth, TX 76132 • (35.2 miles) • Full Time • 9/14/2026

Job Title: Lead Software Engineer Location-Type: Hybrid 3 days onsite Start Date Is: June 22 Duration: 6 month contract to hire Compensation Range: $65-73/HR W2 Benefits: Eligible for Health, Dental, Vision, 401K Must be authorized to work in the U.S. This position is not eligible for sponsorship . Job Description:We are seeking a Lead Software Engineer to drive development initiatives across a customer-facing financial wellness platform while serving as a hands-on technical leader across enterprise engineering initiatives.Day-to-Day Responsibilities:Lead development initiatives across a customer-facing platformBuild and support scalable applications using React, TypeScript, JavaScript, Node.js, and AWSOwn technical delivery from requirements gathering through deployment and production sup

Arlington, TX 76001 • (40.9 miles) • Full Time • 9/14/2026

FST Technical Services Commissioning (Cx) division is one of the leading Cx firms in the country. We partner with clients for quality assurance in the design, construction, and post-acceptance phases of building projects. We ensure that equipment in mechanical, electrical, plumbing, and associated systems are designed, installed, and functionally tested to meet the clients requirements and design intent.About the job: A commissioning senior project engineer reports to a team leader and is responsible for the delivery and execution of our professional services tasks for equipment in mechanical, electrical, plumbing, and associated systems.Responsibilities:Primary activities include completing office assignments, time and expense management, in-field installation validation, field observatio

Fort Worth, TX • (44 miles) • Full Time • 9/14/2026

Quality EngineerLocation: Fort Worth, TXDepartment: Quality AssuranceReports To: Quality Assurance DirectorJob Type: Full-Time, ExemptSalary: $75,000 - $95,000Position OverviewThe Quality Engineer serves as the primary liaison between the company and its customers regarding product quality concerns. This role ensures customer satisfaction by managing quality issues, driving root cause analysis, implementing corrective actions, and continuously improving processes to meet customer expectations and industry standards. The Quality Engineer will develop all protocols for FAT’s (Factory Acceptance Test), HAT’s (Hardware Acceptance Test) and other Customer required documents along with conducting the above testing with or for the customer.Key Responsibilities·Writing technical papers which inclu

Fort Worth, TX • (44 miles) • Full Time • 9/12/2026

Lead structural design for residential and light commercial projects, with a focus on foundations and framing systems (wood, steel, and concrete).Prepare, review, and seal structural calculations, drawings, and specifications in accordance with applicable building codes and standards.Conduct site investigations and structural inspections; evaluate existing structures and develop repair or retrofit solutions.Serve as Engineer of Record on select projects, taking responsibility for technical accuracy and code compliance.Coordinate directly with clients, architects, contractors, and local jurisdictions in a highly collaborative two-engineer firm environment.Manage projects from proposal through construction administration, including scope, schedule, and budget oversight.Support business devel

Fort Worth, TX • (44 miles) • Full Time • 9/12/2026

Founded in 1984, Firetrol is the national leader in fire protection & life safety services.We are currently seeking a Fire Alarm Designer / AutoCAD Drafter to join our team of over 1,200 of the best fire protection and security professionals in the industry.This opportunity will be in our Fort Worth, TX location.Entry level position, but pay will be based on experience.CAD Designer Responsibilities:Proficiency in AutoCAD 2019 or later.Using AutoCAD to create layouts for low voltage system such as fire alarm, card access, security, etc.Coordination of local, state, national, and international codes that apply.Creation of technical submittals including data cut sheets and specified equipment.Communicate technical concepts to sales reps, operations team, and customers.Other duties as assigned

Weatherford, TX 76087 • (34.8 miles) • Full Time • 9/11/2026

Benefits:401(k) matchingCompetitive salaryDental insuranceFlexible scheduleHealth insuranceOpportunity for advancementProfit sharingVision insuranceAbout the Role: Join THREE PHASE as a Process Controls Engineer in the Dallas/Ft. Worth or Austin, TX, where innovation meets excellence! In this exciting role, you will be at the forefront of optimizing control systems and enhancing operational efficiency in a dynamic environment. The Controls Engineer is a mid-to-senior level position at Three Phase. Our projects typically involve the development of solutions using a variety of automation technologies and platforms. These technologies are deployed for the control of automated industrial process in data centers, water/wastewater, central plants, power plants, pharmaceutical, oil & gas, and che

Hillsboro, TX 76645 • (31.2 miles) • Full Time • 9/11/2026

ABOUT THE ROLEThe Continuous Improvement Engineer supports facility-wide initiatives focused on improving safety, quality, efficiency, and cost performance. This role provides hands-on experience in Lean Manufacturing, Six Sigma, and process optimization by working closely with cross-functional teams to analyze operations and implement improvements. The position is designed to develop foundational skills in industrial engineering and continuous improvement methodologies.Salary range (insert amount here). Based on location and experience.SAFETY IS OUR HIGHEST PRIORITY. Safety is our highest priority. We believe a safe workplace is built on mutual respect, care, and accountability. Every team member is empowered and expected to follow safety practices, look out for one another, and speak up

Fort Worth, TX 76119 • (40.5 miles) • Full Time • 9/10/2026

Job Summary:Duties/Responsibilities:Execute a Specialized Truck build program that is under way, with outside vendors and engineersIdentify, evaluate, and execute continuous improvement opportunities.Contact suppliers concerning questions of performance and availability of parts, evaluate quotations, capability and assist in make or buy selection.Create bills of material for product and components.Develop and review projects, analyze and interpret specifications and features required to meet technical performances specified.As a project leader, direct, instruct, assist, and evaluate the work of others involved in the assigned project.Provide guidance to manufacturing and quality control regarding design and/or part issues.Lead process design/analysis documentation, benchmarking and new pro

Fort Worth, TX 76140 • (36.2 miles) • Full Time • 9/10/2026

Suzhou Junchuang Auto Technologies, established in June 2005, is headquartered in Mudu Town, China - a historic town with a 2,500-year legacy on the shores of Taihu Lake.The company is committed to attracting top talent and fostering a culture that values family, innovation, and excellence. Our goal is to be the world-class automotive supplier, guided by our dedication to the highest standards of professionalism, technology, quality, and satisfaction. We prioritize not only our customers but also the well-being and satisfaction of our employees, ensuring a supportive and rewarding work environment.Benefits:* Full medical/health benefits* 401k Retirement plan* Salary: $60,000 to $65,000 per yearOur work environment includes both modern office spaces and advanced manufacturing facilities spe

Fort Worth, TX 76102 • (42.9 miles) • Full Time • 9/10/2026

Hazen and Sawyer is seeking an entry-level engineer for our Fort Worthoffice. As part of our design and process teams, you will work on water and wastewater projects, including drinking water/wastewater/reuse treatment facility upgrades, conveyance systems, wellfields, stormwater management, water resources, and asset management.Why Hazen and Sawyer:Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water."Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management.We foster a work environment low on bureaucracy and high in creativity.We recruit talented professionals, provide them with challenging,

Fort Worth, TX • (44 miles) • Full Time • 9/10/2026

Job SummaryReporting to the Engineering Project Manager, the Civil Engineer will perform civil engineering work for both the private and public sectors. In this role, work includes site development, commercial development plans, subdivisions, and roadways utilizing Civil 3D and other applicable software programs. Additionally, the Civil Engineer will exhibit exceptional professional and communication skills in a collaborative environment. The Civil Engineer, with the guidance of the Engineering Project Manager, works to meet the needs of clients by providing excellent technical input and customer service.Essential Duties and ResponsibilitiesPrepares engineering plans, design calculations, specifications, bid documents and cost estimatesConducts engineering design under the supervision of a

Fort Worth, TX • (44 miles) • Full Time • 9/10/2026

Job Posting - Assistant Project Manager / Project Engineer Position: Assistant Project Manager / Project EngineerIndustry: Commercial PaintingLocation: Carrollton, TX | DFW MetroplexEmployment Type: Full-TimeTravel: Local project and client visits required | 50%+ field time | No overnight travelAbout the Opportunity We're partnering with a growing commercial painting contractor in the DFW area that is looking to add an Assistant Project Manager / Project Engineer to its team.This is a great opportunity for someone who is driven, personable, and eager to grow within the commercial construction industry. The company is looking for someone who can learn alongside an experienced team, take on increasing responsibility, and develop into a Project Manager over time.The right person doesn't need

Fort Worth, TX 76108 • (41.4 miles) • Full Time • 9/9/2026

Job Description: Aircraft Retrofit Certification EngineerJob Location: Fort Worth, TX Job Type: W2 Contract, 40 hours per weekJob Description:Support multiple aircraft interior retrofit and entry-into-service programs by executing certification engineering activities within an ODA environment. Responsibilities include developing and reviewing STC packages, assessing aircraft drawings and substantiation documentation, and supporting aircraft acceptance and compliance verification. The role involves hands-on involvement in large transport category aircraft interior modifications, ensuring compliance with FAA Part 25 requirements and supporting ODA certification processes across retrofit and new aircraft programs.Qualifications:Minimum BS is Engineering discipline from an accredited college/u

China Spring, TX 76633 • (38.7 miles) • Full Time • 9/9/2026

Training/Base pay rate of $17.00 per hour. The Base rate increases .50 upon completion of 60 days of employment.We have a Guaranteed Hourly Rate of $20.00 per hour upon completion of training through your first 9 months. This allows time to build your bonus and commission skills. If your post-training base rate, plus bonuses and commission don’t bring you to the Guaranteed Hourly Rate, we will increase your pay. However, the earning potential is much higher!Schedule: This position requires working 5 days a week, which includes working on holidays. Your designated days off each week will be Sunday and Monday.Bonus Opportunity: Earn a Trained and Active Bonus of $500.00, half of which you receive at approximately 60 days and the other at approximately 6 months.About Us: At Southern Star, we

Fort Worth, TX 76108 • (41.4 miles) • Full Time • 9/9/2026

Job Title: Senior Mission Systems Software Engineer (C++/C#/Rust) Location: Fort Worth, TexasType: Contract To HireContractor Work Model: OnsiteHours: 40 hours per weekSecurity Clearance: Active Secret required We are seeking a Senior Software Engineer to support advanced mission systems in a secure, high-performance environment. This role is focused on designing and building distributed data architectures, automated pipelines, and AI/ML-enabled capabilities that power real-time sensing, tracking, and decision support. The ideal candidate has hands-on experience developing in C++, C#, or Rust and excels at translating complex system requirements into scalable, production-ready solutions. ResponsibilitiesDefine and implement architectures for automated systems and big-data ecosystems Develo

Fort Worth, TX • (44 miles) • Full Time • 9/9/2026

WHO WE AREWe are a company wherepeople matter.We arefamily driven.We arefinancially strong.And we are looking for problem-solvers to join our growing team. BENEFITSUp to 10% Retirement Contribution$600 per Year Wellness IncentiveFront-Loaded Paid Time OffMedical, Dental, and Vision - Eligible first day of the month following hire date.JOIN A TOP WORKPLACE - https://www.youtube.com/watch?v=7nlFHnnfvhkFIELD ENGINEERThe primary purpose of this position is to execute and support field service equipment activities for Hydrite Chemical's Manufactured Solutions Group. These activities include understanding a customer (or prospect) process, to be aligned to equipment installs, upgrades, preventative maintenance, as well as being a technical resource and proficient in system design, program configu

Fort Worth, TX 76126 • (32.1 miles) • Full Time • 9/8/2026

Step into a day on our Field Service teamSun up in Fort Worth. You load the truck, review the work orders, and head to a regional distribution center to bring a downed baler back online. By mid-morning, you're tracing a hydraulic issue, verifying 480V feeds, and dialing in a VFD. After lunch, you upgrade a conveyor safety circuit and validate PLC I/O. Before heading out, you walk the customer through what you fixed and what's next. Tomorrow could be a manufacturing plant, a material processing center, or a recycling facilityanywhere across the U.S., with occasional international travel.You'll be joining a 30-year industry leader in waste and recycling equipmentan organization trusted by distribution centers, manufacturing plants, material processors, and recycling operations nationwide and

Fort Worth, TX • (44 miles) • Full Time • 9/8/2026

Quality Control (QC) Engineer requires:Quality Control, Electronics Manufacturing, Electronic Assembly, PCBA Inspection, Product Inspection, Quality Inspection, Defect Identification, Corrective Actions, Root Cause Analysis, PFMEA, Quality Tools, Pareto Charts, Histograms, Check Sheets, Kaizen, Continuous Improvement, Quality Reporting, Manufacturing Quality, Process Inspection, QC Checklists, Quality Documentation, IPC Standards, Team CollaborationBasic experience in electronic assembly and inspection procedures.Experience working in the electronics manufacturing industry.Basic knowledge of quality tools, including Pareto Charts, Histograms, Check Sheets, and other basic quality improvement tools.Experience identifying defects, conducting inspections, documenting quality issues, and verif

Fort Worth, TX 76140 • (36.2 miles) • Full Time • 9/7/2026

Job Summary:We are seeking a Manufacturing Engineer to join our Production team. The Manufacturing Engineer supports the resolution of production issues and provides engineering support to implement new products and processes into production. The Manufacturing Engineer is also responsible for supporting existing products through the manufacturing process.Job Responsibilities:Analyze process design functions to determine product flow through the manufacturing department by use of current engineering and continuous improvement techniques.Research suitable alternative electronic components for obsolete materials.Troubleshoot manufacturing problems and develop solutions consistent with manufacturing’s capabilities and equipment.Analyze and plan workflow, space requirements, and equipment layou

Arlington, TX 76001 • (40.9 miles) • Full Time • 9/6/2026

Project Engineer / Design Manager(Senior Project Manager track available)Location: Arlington, TexasCompany: Graham Associates, Inc.Employment Type: Full-TimeRepresented by: Luxus Group Recruiting – www.LuxusJobs.comAbout Graham Associates, Inc.Graham Associates, Inc. is a well-established, Texas-based civil engineering, planning, and surveying firm headquartered in Arlington. For decades, Graham has played a key role in shaping North Texas communities through the delivery of public infrastructure, roadway, municipal utility, drainage, and land development projects for both public agencies and private-sector clients.What differentiates Graham is its hands-on leadership model, strong client relationships, and long-tenured technical staff. Engineers at Graham are trusted to own their projects

Mansfield, TX 76063-2712 • (39.3 miles) • Full Time • 9/6/2026

Description: Field Service Technician Job DescriptionJob Title: Field Service Technician Department: 210 Mfg. ServiceReports to: Service and Installation Manager Pay Type: EXEMPTAbout Us:Filtration Automation LLC is a Middleby company, providing state-of-the-art processing equipment for our partners in the food industry. We specialize in providing oil filtration systemsfrom consultation through system design, manufacturing, and integration. Our cutting-edge technology focuses on turnkey systems for high-capacity further processing lines.Job Summary:To provide outstanding service and support to all customers whether it is trouble shooting over the phone or on-site service. The goal is to resolve all customer opportunities and issues as quickly as possible while maintaining a professional an

Fort Worth, TX • (44 miles) • Full Time • 9/6/2026

At LiquidStack, we're redefining what's possible in the data center world. As a global leader in advanced liquid cooling solutions, we're powering the future of AI, edge computing, and high-performance systems. Our team is growing, and we're looking for skilled professionals who want to be part of something innovative and impactful.POSITION SUMMARYThe Manufacturing / Process Engineer is a process-owning, hands-on role supporting final assembly operations in a fast-paced, scaling manufacturing environment. This engineer is responsible for developing, improving, and sustaining safe, repeatable, and high-quality manufacturing processes for complex mechanical and electromechanical assemblies.This role is ideal for an engineer with 2–4 years of experience in HVAC, mechanical systems, automotive

Fort Worth, TX 76107 • (40.7 miles) • Full Time • 9/5/2026

Description: ABOUT INTERCONNECT WIRINGHeadquartered in Fort Worth, TX, we build electrical wiring harnesses, specializing in fast turnaround and developmental programs. Founded in 1993, we continue to be a world leader in supplying military aerospace electrical products. Some of our most noteworthy accomplishments include the complete and partial rewiring of military aircraft.We work hard to be an employer of choice and make our working environment safe, comfortable, family-friendly, and fun. In addition to competitive compensation, our employees enjoy Fridays off.The Manufacturing Engineer supports aerospace wiring harness production by directing daily operations, developing engineering documentation, and driving continuous improvement across manufacturing processes. This role bridges eng

Fort Worth, TX 76164 • (43.8 miles) • Full Time • 9/5/2026

This position will have the opportunity to design electrical systems for exciting new construction and renovation projects, with a focus on the design of systems supporting mission-critical facilities. Projects will be multi-discipline, and the ability to adeptly coordinate with other disciplines is required. The ideal candidate will produce drawing markups and specifications; coordinate design requirements with other disciplines, as well as act as the Lead Engineer for the electrical discipline on assigned projects by reviewing designs and calculations for accuracy and quality and assisting in the overall efforts to effectively manage project quality, schedule and budget. Responsibilities:Collaborate with our clients to understand their needs, constraints, and criteria for success.Develo