Pay starts at $18.00 an hour and goes up depending on experience.
Our ideal candidate should have previous experience as a mechanic/technician in the trailer industry. Carpentry, welding and mechanic skills are a plus. We are looking for a self-motivated person with strong work ethics. We are willing to train the right applicant.
Duties will include: Read and understand the jobs and work order per company standards Preventative maintenance and repair all systems on Semi-Trailers to meet the standards set forth by DOT Remove and replace brakes, brake drums, hubs, seals, bearings, races and associated parts Repair electrical and lighting systems Repair or replace chassis components such as springs, spring hangers, equalizers, complete slider assemblies, axles, and sub frames Repair mud flap brackets and dolly leg assembles Repair or replace flooring, rub rails, doors and door trim Repair roofs, panels, nose panels, lower and upper rails Conform to all safety and health standards Assist fellow mechanic technicians
Benefits: Paid time off Paid holidays 401 Medical, Dental, Vision Life Insurance Long and Short Term Disability
Requirements: 1 - 3 years of experience in trailer repair or equivalent experience with welding, carpentry, and mechanic skills Valid driver’s license with a safe driving record. Must furnish own basic hand tools. Ability to stand, walk, bend, crouch, stoop, reach, stretch, step, climb, and / or sit frequently and lift heavy (up to 60lb) throughout the duration of the day Ability to work independently with minimal supervision Attention to detail and highly organized

We are seeking a Class A CDL Driver with experience hauling and operating heavy highway equipment for a Heavy Highway Road & Bridge Company working in Houston and surrounding counties.
Performs pre-trip and post-trip inspection of trucks, trailers, and equipment Transports equipment to job sites Safely load/unload excavators, cranes, backhoes, loaders, motor graders, dozers Must be able to safely operate dump truck and water truck Works with hydraulic tools, hand tools, and electrical tools Performs manual labor as needed to accomplish work and meet job accomplishment expectations Responsible for keeping the work-site, vehicles, equipment and tools are safe, clean and ready for use Must be flexible/work-ready to perform tasks for other departments/locations as may be required to meet needs Follow all required safety policies and procedures Other duties as assigned
Pay rate: $20 - $30/hr based on experience
Benefits: Health Dental 401K Life Insurance *Waiting period may apply
Qualifications: CDL - Class A (Required) 2 years experience as a CDL Driver with ability to load and haul heavy equipment Minimum 2 years experience within the road construction industry Must have a clean driving record Must pass a physical and drug/alcohol test Must be able to pass a background check We participate in E-VERIFY
Work Environment / Physical Requirements: Regularly exposed to outside weather conditions; moving equipment and machinery parts; moving traffic, and fumes and airborne particles Noise level of the work environment is usually moderate/loud Regularly required to stand/walk; reach with hands and arms; for up to 14 hours a day Occasionally lift and/or move more than 50 pounds
Forde Construction is an Equal Opportunity Employer

Job Duties: Operate transit vehicles safely and smoothly to transport passengers. D&R operators: According to the schedule of the Mobile Data Terminal (MDT) or printed manifest. Assure compliance to all applicable DOT laws and regulations. Assists in emergency evacuations as assigned and performs other related work as required. Assure cleanliness of vehicles. Follow instructions from Dispatch and supervisory personnel and communicate any problems to dispatch. Complete daily vehicle pre/post trip inspections. Conducts operational vehicle inspections Maintain good customer/employee/supervisor relations. Report for duty promptly in proper uniform and physical condition and be ready to work any route assigned. Provide information to passengers in a helpful, courteous, efficient manner; use proper etiquette to assist passengers with disabilities. Prepare and complete all required logs and reports including reports on traffic accidents and customer incidents. Utilize the communication systems (cell phones, radios and MDT’s) in accordance with BTD policies. Use correct safety procedures to operate lift, secure wheelchairs, scooters and other assistive devices. Immediately notify dispatch of cancellations, no shows, or for directions when having difficulty locating a client. Maintain the standards of BTD, including but not limited to the Drug & Alcohol, ADA, EEO, Title VI, Code of Conduct and safety policies and procedures. Ability to operate in a constant state of alertness and in a safe manner.
Benefits:
Paid Holidays Paid Vacation Retirement Medical
Requirements: Equivalence to a high school education. Pass DOT Drug Screen Maintain a valid Texas Driver’s License. Maintain DOT Physical. Must be able to speak and read English. Legible handwriting. Must be able to read maps and follow directions. Must be 18 years of age or older. Must be familiar with State and local traffic laws, ordinances, and regulations involved in the operation of vehicles. All employees will be required to work before, during, or after an Emergency. During an Emergency, employees may temporarily be assigned to work and perform duties outside the normal scope of their position, location and work schedule to fit the needs of the County and its citizens.

Our corporate office is currently located in Spring Branch, but will move to Waller in 6 months. This position is part of the corporate office.
The Office Manager/Payable/HR encompasses responsibilities for managing daily office operations, overseeing accounts payable functions, and supporting basic HR tasks, including onboarding, employee records, and potentially assisting with recruitment, all within a single role, acting as a central point of contact for administrative needs within the company.
Office Management: Managing office operations, including scheduling meetings, managing calendars, coordinating office supplies, and maintaining a clean and organized workspace. Overseeing office equipment, ensuring maintenance and repairs are handled promptly. Handling incoming calls and emails, directing inquiries to appropriate staff. Assist owners/management as needed. Work with the Estimator on paperwork for the bid process. Create invoices for customers/keep monthly spreadsheets.
Accounts Payable: Processing invoices, verifying accuracy, and ensuring timely payments to vendors. Maintaining accurate records of accounts payable transactions. Reconciling vendor statements and resolving discrepancies. Managing vendor relationships.
HR Support: Assisting with new employee onboarding process, including paperwork and orientation Maintaining employee records and personnel files Processing payroll and benefits administration (may be limited depending on company structure) Supporting recruitment efforts by posting job openings and coordinating interviews Handling basic employee inquiries regarding company policies, procedures, vacation, and insurance
Benefits: Competitive hourly rate $20.00 to $22.00 an hour, paid weekly Comfortable work schedule: 7am-4pm with a 1-hour lunch break Comprehensive benefits package, including 401k, dental, health, vision insurance, and vacation
Qualifications: Excellent organizational and time management skills Strong attention to detail and accuracy in data entry Proficiency in accounting software and office suite applications Excellent communication and interpersonal skills to interact with various stakeholders Ability to prioritize tasks and meet deadlines  Must be able to pass a drug test and Criminal background check Computer Ease Experience a plus Notary License a plus Fluent in Spanish a plus

We are looking for Part-Time Night Trash Collectors to join us!
You must have an open bed pickup truck or vehicle with trailer.
Are you interested in a part-time opportunity to earn extra income in the evenings? Do you like working outdoors and staying active? If so, you may be a good fit for our Apartment Trash Collector position.
Valet Living is hiring for a Part Time Apartment Trash Collector (Service Valet) to work during the evening hours in your local area. This is a great paying, part time job that is a great way to earn extra money or supplement income while working another job.  You’ll enjoy working outdoors, on your own, in a stress-free environment and get a workout while you do this job.  We are an essential business that continues to grow, and our associates benefit from reliable hours, consistent pay, and promotional advancement opportunities.
We offer an immediate start date and provide hands-on, paid training. No experience is necessary.
Collect trash and recycling bags door to door within a local apartment community and take these items to the trash compactor or dumpster on the property site (no large or bulk items and no offsite driving and/or dumping) Typically work 5 nights a week from Sunday through Thursday. Enjoy weekends off! Work 2-3 hours per night, start time is either 7:00pm or 8:00pm and you are done between 10:00 pm - 11:00 pm (some positions may have earlier start/end times and Sundays may require more hours) Part time hours working 10-15+ hours per week
Benefits: 
Great pay - pickup truck owners and vehicles using trailers will receive the higher part of our pay range. Get paid as you earn using EarnIn**. All driving is done while on community property – no offsite driving or dumping. Paid training and opportunity for growth within the company Employee referral bonus program – get paid for your referrals Earn reward incentives through our recognition program Tuition reimbursement Stay physically fit while working outdoors
**EarnIn is a mobile app that gives people access to their money as they earn it – without waiting for payday.
Qualifications: Must be at least 18 years of age A smart phone with data plan to access our mobile app An open bed pickup truck or vehicle with trailer A valid driver's license Current auto insurance in your name for your vehicle Ability to work indoors or outdoors in changing weather conditions Ability to lift and transport up to 50 lbs
Safety statement: Socially distanced work environment All required Personal Protective Equipment (face covering, gloves, safety vest, etc.) is provided free of charge Our processes exceed the CDC and OSHA guidelines on COVID-19 safety Zero reported occupationally transmitted cases of COVID-19 Dedicated team of occupational health & safety professionals that manage all aspects of associate safety, including COVID-19 protocols.
Valet Living is an Equal Opportunity Employer that values the strength diversity brings to the workplace. We recruit, employ, train, compensate, and promote without regard to race, religion, creed, color, national origin, age, gender, sexual orientation, gender identity, marital status, disability, veteran status, or any other basis protected by applicable federal, state or local law.

Daily Thermetrics, a leader in high-quality manufacturing, is seeking a skilled QA Inspector. This role ensures product safety, reliability, and quality by independently performing inspections using advanced techniques to detect corrosion, defects and other conditions.
The QA Inspector conducts inspections, interprets findings and reports results per company and engineering standards, while effectively communicating with customers, engineering teams, and management.
Production positions may be assigned to either of the following full-time work schedules: First Shift: Monday - Friday 5:00 am - 1:30 pm Second Shift: Monday - Friday 1:30 pm - 10:00 pm
Job Duties:
Maintain a safe, secure, and healthy work environment. Adhere strictly to QA standards and practices, as well as sales order and engineering requirements. Conduct all assigned QA inspections, testing, and calibration duties. Assist non-certified inspectors or new hires with on-the-job training and guidance. Perform or attain job-required Non-Destructive Testing (NDT) certification as necessary. Carry out inspections for which qualifications or certifications are held. Accurately interpret and report the results of inspections to relevant stakeholders.
Benefits: 100% Company paid Employee Only Medical Health Savings Account with Employer contribution 100% Company paid Life Insurance Paid Time Off Paid Holidays 401K with Employer match Medical Plan options available (two medical plans, dependent/family coverage) Health Savings Account Flexible Savings Account Optional Voluntary Benefits Including: Dental, Vision, Supplemental Life Insurance, Disability, Accident plan)
Qualifications: Must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. High school diploma or equivalent required Minimum 6 month’s experience in inspections in a manufacturing environment. Ability to work in Microsoft Word and Excel Ability to work with computers / computerized equipment Ability to read, understand, and communicate in English Ability to follow written or verbal, technical instructions Position is based at a manufacturing/fabrication, climate-controlled shop environment. Interaction with other Inspections employees, as well as engineers, supervisors and third-party inspectors, as needed. Working in plant and/or shop areas around production machinery Ability to lift and carry 75 pounds Must be able to walk and stand for majority of eight-hour work day Sufficient clarity of speech and hearing or other communication capabilities, with or without reasonable accommodation, which permits employee to communicate effectively Sufficient vision or other powers of observation, with or without reasonable accommodations, which permits employee to investigations Sufficient manual dexterity with or without reasonable accommodation, which permit the employee to perform routine office duties Sufficient personal mobility and physical reflexes, with or without reasonable accommodations to perform inspection duties in a fabrication/manufacturing shop. Ability to maintain focus and multitask effectively Excellent communication skills, written and verbal
Daily Instruments provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.   This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.   Daily Instruments has deeply invested in providing a safe and healthy work environment, including on-site cleaning staff, disinfecting air-filtration systems installed in all HVAC systems, office air purifiers, disinfecting lighting in communal areas, company provided COVID supplies (including masks, face/eye protection, hand-sanitizer)

Daily Thermetrics is a fast-growing manufacturing company, and we are looking for a dedicated Purchasing Assistant to join our team. In this role, you will support our purchasing and sales departments, ensuring that projects are completed safely, accurately, and within tight deadlines to meet both quality standards and customer expectations.
The Purchasing Assistant is an entry-level position that plays a key role in maintaining the smooth operation of our supply chain. You will be responsible for providing administrative and operational support, assisting with the preparation of key procurement documents, and tracking orders to ensure timely deliveries.
Support the Purchasing Department in preparing RFQs (Request for Quotation), RFPs (Request for Proposal), and purchase orders. Collaborate with the Sales team to obtain pricing from suppliers for RFQs. Assist in tracking open orders, updating procurement statuses, and maintaining detailed reports. Work with the Accounting team to resolve supplier invoicing discrepancies. Communicate with suppliers to address missed deliveries, short shipments, and other order issues. Contribute to team objectives by taking on additional responsibilities as needed.
Benefits: 100% Company paid Employee Only Medical Health Savings Account with Employer contribution 100% Company paid Life Insurance Paid Time Off Paid Holidays 401K with Employer match Medical Plan options available (two medical plans, dependent/family coverage) Health Savings Account Flexible Savings Account Optional Voluntary Benefits Including: Dental, Vision, Supplemental Life Insurance, Disability, Accident plan)
Qualifications: High school diploma or equivalent (Associate Degree or B.Sc. in Supply Chain or related fields preferred) Minimum two years experience in a purchasing position Proficient in purchasing functions, supply and inventory management. Excellent communication, negotiation and interpersonal skills Must be a detail-oriented team player with ability to prioritize, multitask and work with minimal supervision Strong organizational skills, understanding of sourcing and the ability to maintain vendor relationships Experience with spreadsheet computer applications a must Dependable and Reliable production orientation Position is based at a manufacturing/fabrication shop, climate-controlled shop environment. Interaction with machine shop employees with varying experience, engineers, supervisors as well as third-party inspectors, as needed. Working in plant and/or shop areas around production machinery Ability to lift and carry 20 pounds Sufficient clarity of speech and hearing or other communication capabilities, with or without reasonable accommodation, which permits employee to communicate effectively Strong attention to detail Sufficient personal mobility and physical reflexes, with or without reasonable accommodations to perform inspection duties in a fabrication/manufacturing shop, as needed. Ability to maintain focus and multitask effectively Ability to communicate technical concepts and materials specifications, written and verbal
Daily Instruments provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.   This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Daily Instruments is seeking an Assembly Technician to join our rapidly growing manufacturing team. This position is responsible for assembly of thermal-instrumentation products that are used in refinery and chemical plant facilities. Assembly Technicians are responsible for working in a cohesive team environment to produce sub-assemblies, and final products as well as coordinating onsite work with engineering, inspections, machine shop and other production personnel. The successful Assembly Technician will ensure that projects are completed safely, in strict compliance with ISO & QA requirements, and in a timely basis to meet shipping requirements.
This is an Entry-Level, Full-Time, Hourly, Non-Exempt production shop position.
Climate-Controlled facility all year round.
Shifts Available: First Shift: Monday - Friday 5:00 am - 1:30 pm Second Shift: Monday - Friday 1:30 pm - 10:00 pm
OT and weekend hours for both shifts assigned as needed to meet production needs.
Assemblers perform tasks that are necessary to the production process. Assemblers aid in the fabrication, maintenance, and repair of component parts and products Carry out assembly day-to-day work instructions to ensure accurate assembly of products Read and understand safety instructions and ensure all safety rules and procedures are followed Focus on quality control of assembled products Read and understand technical drawings, specifications Performs work by following assembly work instructions, technical specifications, and parts lists; gathering parts, subassemblies, tools, and materials. Cutting, stripping, bending, fastening, and working with hand-held tools Documents actions by completing production/worktime tracking and quality forms. Contributes to team effort by accomplishing related results as needed
Benefits: 100% Company paid Employee Only Medical Health Savings Account with Employer contribution 100% Company paid Life Insurance Paid Time Off Paid Holidays 401K with Employer match Medical Plan options available (two medical plans, dependent/family coverage) Health Savings Account Flexible Savings Account Optional Voluntary Benefits (including: Dental, Vision, Supplemental Life Insurance, Disability (short-term & long-term), Accident Insurance)
Qualifications: Team Work orientation Dependable and Reliable production orientation Experience working in a manufacturing or fabrication environment preferred Proficient knowledge of measuring equipment such as micrometers, dial indicators, calipers, and scaled rules Working knowledge of hand power tools, and other hand-held tools Able to lift up to 100 pounds Must be legally authorized to work in the US for any employer other than current employer Must be fluent in English, any other language skills are beneficial This position is considered SHOP/INDOOR WORK Additional work hours assigned as need to meet production goals Climate-controlled facility all year round
Daily Instruments has deeply invested in providing a safe and healthy work environment, including on-site cleaning staff, disinfecting air-filtration systems installed in all HVAC systems, office air purifiers, disinfecting lighting in communal areas, company provided COVID supplies (including masks, face/eye protection, hand-sanitizer).   Daily Instruments/Daily Thermetrics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA. Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran.

Daily Instruments is seeking an entry-level Machine Shop Helper to join our rapidly growing manufacturing team. This position will assist with the setup, parts delivery, monitoring, operation, cleaning of machines in machine shop. Shop Helpers are responsible for working in a cohesive team environment to ensure all production goals are in compliance with customer requirements. The successful Machine Shop Helper will ensure that assigned tasks are completed safely, in strict compliance with ISO & QA requirements, and in a timely basis to meet production & shipping requirements.
This is a Full-Time, Hourly, Non-Exempt production shop position.
Machine Shop Helper position will be on: Production Second Shift Monday - Friday 1:30 pm - 10:00 pm
This position is considered shop/indoor work; but will also work in outdoor loading dock area Additional work hours assigned as need to meet production goals Climate-controlled facility all year round
Responsibilities: Machine Shop Helpers perform tasks that are necessary to the production process. Carry out assembly day-to-day work instructions to ensure accurate and timely production goals Read and understand work instructions. Assist with maintaining, operating, cleaning machines Maintain a clean, orderly work environment Contributes to team effort by accomplishing related results as needed
Qualifications: Team Work orientation Basic understanding of shop math Dependable and Reliable production orientation Working knowledge of hand power tools, and other hand-held tools Able to lift up to 50 pounds Must be legally authorized to work in the US for any employer other than current employer Must be fluent in English, any other language skills are beneficial
Benefits: 100% Company paid Employee Only Medical Health Savings Account with Employer contribution 100% Company paid Life Insurance Paid Time Off Paid Holidays 401K with Employer match Medical Plan options available (two medical plans, dependent/family coverage) Health Savings Account Flexible Savings Account Optional Voluntary Benefits (including: Dental, Vision, Supplemental Life Insurance, Disability (short-term & long-term), Accident Insurance)
Daily Instruments/Daily Thermetrics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA. Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran   Daily Instruments has deeply invested in providing a safe and healthy work environment, including on-site cleaning staff, disinfecting air-filtration systems installed in all HVAC systems, office air purifiers, disinfecting lighting in communal areas, company provided COVID supplies (including masks, face/eye protection, hand-sanitizer)

Our position is business to business sales and pays a base plus residual, ongoing commission on accounts. We’re a Houston based job board with national exposure. We provide unique, specialized recruiting solutions and technology. We sell recruitment advertising. We’re hands-on, have more product options and are customized to each client’s needs. We’re a woman owned and a family-owned business with a close-knit, fun corporate culture. Reps earn $50K to $60K their 1st year. Our most successful reps earn $80,000 to $120k per year working 35 hours per week.
Position Overview: Small office, low stress atmosphere. $50,000+ your first year. Earnings based on 15% commission on all sales plus a base of $30K per year.
Business to business advertising sales primarily over the phone. Develop and maintain relationships with decision-makers. Learn their needs and convey the value of our products and technology. Close sales and achieve sales targets.
We’re a Houston based job board with national exposure. For over 25 years JobSparx has provided unique, specialized recruiting solutions and technology. We sell recruitment advertising. We’re hands-on, have more product options and are customized to each client’s needs.
Our employees benefit from: Base pay plus uncapped commission on all self sold accounts. Repeat and ongoing commission on renewing accounts. An upbeat, fun, positive work environment. Long term, professional, stable career opportunity. Great Hours (Monday -Friday 9am - 5pm). Big monthly bonuses & incentives. Woman owned business environment. Business casual dress code. Paid vacation and personal time off.
Job Requirements: Commission related sales experience. Feel comfortable on the phone. Ability to identify and reach decision makers at key levels. Enjoy working in a small office environment. Must be personable, friendly, curious, confident and ambitious. Ability to learn fast and think on your feet.