SEARCH
GO
Mechanics Jobs
Full Time
4/4/2025
Houston, TX 77026
(11.1 miles)
$18.00 / hr
Pay starts at $18.00 an hour and goes up depending on experience.
Our ideal candidate should have previous experience as a mechanic/technician in the trailer industry. Carpentry, welding and mechanic skills are a plus. We are looking for a self-motivated person with strong work ethics. We are willing to train the right applicant.
Duties will include: Read and understand the jobs and work order per company standards Preventative maintenance and repair all systems on Semi-Trailers to meet the standards set forth by DOT Remove and replace brakes, brake drums, hubs, seals, bearings, races and associated parts Repair electrical and lighting systems Repair or replace chassis components such as springs, spring hangers, equalizers, complete slider assemblies, axles, and sub frames Repair mud flap brackets and dolly leg assembles Repair or replace flooring, rub rails, doors and door trim Repair roofs, panels, nose panels, lower and upper rails Conform to all safety and health standards Assist fellow mechanic technicians
Benefits: Paid time off Paid holidays 401 Medical, Dental, Vision Life Insurance Long and Short Term Disability
Requirements: 1 - 3 years of experience in trailer repair or equivalent experience with welding, carpentry, and mechanic skills Valid driver’s license with a safe driving record. Must furnish own basic hand tools. Ability to stand, walk, bend, crouch, stoop, reach, stretch, step, climb, and / or sit frequently and lift heavy (up to 60lb) throughout the duration of the day Ability to work independently with minimal supervision Attention to detail and highly organized
Full Time
3/21/2025
Mont Belvieu, TX 77521
(25.3 miles)
$22.50 / hr
Pol-Tex International, a division of Poly-America, L.P., is currently seeking an Industrial Mechanic to join our maintenance team. Pol-Tex International’s mission is to be the safest and most efficient choice in the polyethylene recovery, recycling, and compounding industries.  Our fleet, facility, and equipment combined with our experienced and dedicated professional staff make Pol-Tex International the premier gathering and recycling center for the Gulf Coast Region. Pol-Tex International offers competitive compensation packages including Medical/Dental, paid vacations and holidays, and 401(K). Responsibilities Industrial Mechanics at Pol-Tex International are responsible for the maintenance, installation, troubleshooting, and modification of new and existing industrial converting equipment. This role will document, recommend, and execute maintenance procedures. The Mechanic will be working in a manufacturing maintenance team. At times they will complete the mechanical testing of electro-mechanical equipment. Tasks include replacing, inspecting and dismantling defective parts, and implementing upgrades and part changeovers. The role may involve additional responsibilities and opportunities as they become necessary and/or are assigned by management.
The ideal candidate will possess: Some experience performing troubleshooting functions in a manufacturing environment. A strong desire to be hands on with their work and to follow processes through. The aptitude and desire necessary to be a good student of Pol-Tex processes, equipment, and procedures. Problem solving skills including troubleshooting of mechanical equipment.
Full Time
3/14/2025
Baytown, TX 77523
(31.1 miles)
Maintains equipment operation by completing inspections and preventive maintenance requirements; correcting vehicle deficiencies; adjusting and alignments; keeping records. Work performed on trucks, trains & heavy equipment.
Job Duties: Determines vehicle condition by conducting inspections and diagnostic tests; identifying worn and damaged parts. Keeps equipment available for use by completing preventive maintenance schedules; installing component and part upgrades; controlling corrosion; completing winterization procedures. Corrects vehicle deficiencies by removing, repairing, adjusting, overhauling, assembling, disassembling, and replacing major assemblies, sub-assemblies, components, parts, or systems, such as, power and drive trains, electrical, air conditioning, fuel, emission, brake, steering, hydraulics; completes machine shop operations; adjusting and alignments including bearing loads, gear tooth contact, valve mechanisms, governors, oil systems, control linkages, clutches, and traction units. Verifies vehicle performance by conducting test drives; adjusting controls and systems. Complies with federal and state vehicle requirements by testing engine, safety, and combustion control standards. Maintains vehicle appearance by cleaning, washing, and painting. Maintains vehicle records by annotating services and repairs. Keeps shop equipment operating by following operating instructions; troubleshooting breakdowns; maintaining supplies; performing preventive maintenance; calling for repairs. Contains costs by using warranty; evaluating service and parts options. Keeps supplies ready by inventorying stock; placing orders; verifying receipt. Updates job knowledge by participating in educational opportunities; reading technical and regulation publications. Enhances maintenance department and organization reputation by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments. Performs some physical work to include climbing, heavy lifting, and carrying Travel may be required to reach a vehicle needing repair.
Benefits: Medical Dental Vision Life Insurance 401K with Match Paid Holidays/Vacation Safety Bonus Program
Qualifications: Pre-employment drug and alcohol screening. Background screening including previous employment, education, criminal history and driving record verification. Valid Texas driver license Caterpillar experience a plus. Experience with Backhoes, Excavators, Dozers, Forklift, & Off Road Trucks.
Full Time
3/25/2025
Humble, TX 77396
(4.4 miles)
Build an Aviation Career You’re Proud Of StandardAero Houstonis a premier business aviation MRO (Maintenance, Repair, and Overhaul) facilityspecializing in the service of mid-sized corporate jets. We support an extensive range of aircraft models, including renowned brands such as Falcon, Hawker, Learjet, and Embraer. In addition to comprehensive airframe services, the facility features a state-of-the-art engine shop and test cell, performing overhauls on TFE731 and CFE738 engines.With a commitment to quality and customer satisfaction, StandardAero Houston is dedicated to keeping business aviation flying safely and efficiently. This experienced A&P Mechanic will be responsible for performing routine and heavy maintenance as well as major inspections on mid-sized corporate aircraft. Troubleshooting, repair, and modification in addition to engine removal and reinstallation, operational checks, leak checks, and engine runs are all within the responsibility of this Mechanic. Experience with corporate/business jet models of Embraer, Falcon, Lear, and/or Hawker aircraft is required. What You Will Do: Inspect aircraft per OEM Light or Heavy Maintenance Manuals.Remove and install wheels, brakes, flight controls and riggingsEvaluate removed components for serviceability and document discrepancies.Troubleshoot and repair airframe systems including hydraulics, landing gear, and more.Interpret maintenance manuals, blueprints, and technical documents.Analyze mechanical problems to determine the best repair methods.Test, repair, and adjust engines, engine controls, and flight controls.Check and repair fuel, oil, oxygen, heating, cooling, and pressurization systems.Utilize hand tools and precision measuring instruments effectively.Remove and reinstall engines from turbofan aircraft.Conduct operational checks and engine runs to ensure airworthiness prior to departure.Make informed decisions on maintenance techniques and troubleshooting.Availability and flexibility to work overtime and weekends to support business needs. Basic Requirements: Previous experience working on Embraer, Falcon, Lear, Citation, Challenger, Gulfstream, Global and/or Hawker aircraftValid FAA-approved Airframe and Powerplant (A&P) license.Minimum of three (3) years experience as an A&P Mechanic in corporate / business aviation.Must be able to work 2nd shift, with overtime as required by the business needsMust be authorized to work in the U.S. without sponsorship.Must have a Highschool Diploma or GED equivalent Preferred Requirements: Minimum of 5 years working in Business / Corporate Aviation.Experience working in a Maintenance, Repair, Overhaul (MRO) environment.Experience/Training with Honeywell, Bombardier, Dassault, and/or Gulfstream productsAviation training or certifications, including military training, aeronautical academy, technical school, or an Aviation Associates Degree. Benefits that make life better: Relocation Assistance and Sign-On Bonus AvailableComprehensive Healthcare Insurance401(k) with a 5% company match, immediately vested.Paid Time Off and paid HolidaysQuarterly Bonus opportunitiesHealth & Dependent Care Flexible Spending AccountsShort & Long-Term Disability InsuranceLife and AD&D InsuranceCareer development and cross-training opportunities through organizations like FlightSafety and CAE Raising the Standard of Excellence since 1911 With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers’ missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero’s policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero
Full Time
3/25/2025
Houston, TX 77090
(7.4 miles)
Overview: CONSIDER A CAREER WITH LAND ROVER SANTA FEWE HAVE THE BEST PAY IN THE MARKET AND RELOCATION ASSISTANCE!Land Rover Santa FeWe are looking to add qualified Master Automotive Technicians to our team!$10,000.00 Sign-On Bonus for Master Technicians | $5,000.00 Sign-On Bonus for Level 2 & 3 Technicians!In addition to our competitive pay, we offer our associates the following benefits:Relocation reimbursement available!**Job training and career advancement opportunitiesHealth, Dental, Vision, Life and Disability Insurance401(k) with company matchEmployee stock purchase programEmployee vehicle purchase programPerformance / longevity bonusesPaid time-offResponsibilitiesEfficient and accurate work in accordance with dealerships and factory standardsComplete system diagnostics and full automotive troubleshooting and testingMaintain an organized shop areaRoad-test vehicles to ensure quality workComply with company safety policies and proceduresCommunicate directly with service advisors regarding the status of the service workContinuously learn new technical information and techniquesAdhere to our values: Integrity, Transparency, Professionalism and TeamworkQualificationsAutomotive Technician Experience Required5-7 Years of Master Automotive Technician experience3-4 Years of Level 2 & 3 Automotive Technician experienceAutomotive technical or trade school degreeNational Institute of Automotive Service Excellence (ASE) certification(s) or certification(s) in: brakes, electrical/electronic systems or engine performance.High School Diploma or equivalentValid driver’s license in the state and good driving recordGroup 1 is a Fortune 250 company that owns and operates automotive dealerships and collision centers in the United States and United Kingdom. We offer our associates a team environment, great benefits and ongoing training and support. If you are in alignment with our values of integrity, transparency, professionalism, teamwork and respect - now might be the time for you to accelerate your career as part of the best company in automotive retail. Apply today or refer a qualified friend!All applicants must pass pre-employment testing to include: background checks, MVR, and drug testing in order to qualify for employment** Relocation Reimbursement must be approved prior to job acceptance Group 1 Automotive is an Equal Employment Opportunity EmployerIND1
Full Time
4/1/2025
Houston, TX 77076
(7.8 miles)
Clean Harbors in Houston, TX location is looking for a Container Mechanic. As a Container Mechanic you will be responsible for Sanding,prepwork,inspecting, fabricating, cutting, welding, patching tarps or replacing tarps on the containers at Clean Harbors locations and our customer locations such as refineries. This position will require logging all the necessary entries of time and materials into an electronic repair order system. The company will provide welding equipment and service truck. This position also requires a valid driver’s license. Why work for Clean Harbors Health and Safety is our #1 priority and we live it 3-6-5!Competitive wages;Comprehensive health benefits coverage after 30 days of full-time employment;Group 401K with company matching component;Generous paid time off, company paid training and tuition reimbursement;Positive and safe work environments;Opportunities for growth and development for all the stages of your career.Key Responsibilities: Ensure that Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and acting in a safe manner at all times;Perform compliance and safety inspections; correct equipment deficiencies and perform preventative maintenance on company owned equipment.Perform welding, cutting, grinding, mechanical repair, and all other metal working techniques consistent with the container repair trade.Maintain established shop housekeeping and building maintenance obligations as well as welding systems, general repair equipment, and shop tools.Perform surface preparation of equipment prior to painting; apply paint or similar coatings using hvlp, airless, or manual tooling and processes.Perform fabrication, cutting, and welding on roll off containersProduce quality product while focusing on given standardsLog all necessary entries of time and materials into electronic repair order systemEnsure the company truck is kept clean, tidy and free of hazards at all timesPerforms other welding duties and tasks as assigned from time to time by management and will be required by the needs of the Clean Harbors businessWhat does it take to work for Clean Harbors Welding (MIG & Stick) and mechanical experience in a fabrication/repair shop environment;Experience performing flat welding with steel preferred;Successful completion of Structural Welding test;Welding Certification is considered an asset;Ability and willingness to wear a respirator, must be clean shaven;Valid driver's license and clean 3-year driving record are required.Join our team today! To learn more about our company, and to apply online for this exciting opportunity, visit us at https://careers.cleanharbors.com/ Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is one-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. We thank all those interested in joining the Clean Harbors team; however only those that complete the online application and meet the minimum job qualifications will be considered for this role. Clean Harbors is a Military & Veteran friendly company. *CH
Full Time
3/25/2025
Houston, TX 77032
(1.4 miles)
$24.00/hourShift Premium may ApplyImmediately hiring! Are you a diligent and meticulous individual with expertise in automotive repair If you have experience working in an auto garage or car dealership, we want you to join the Avis Budget Group enterprise!What You’ll Do:You’ll perform standard and complex repairs, including warranty, on a wide variety of auto makes and models with no technical supervision, including the diagnosis and repair of engines, transmissions, exhaust, brakes, electrical, air conditioning and computer systems. You may also act as a technical expert to other technicians in the shop.Perks You’ll Get:Bi-weekly hourly wage (New York and Puerto Rico: weekly wage)On-the-job training in our vehicle makes and modelsPaid time offMedical, dental and other insuranceFlexible spending account opportunity to contribute up to $270 as a tax-free benefit for public transportation or parking expensesRetirement benefits (401k)Employee discounts, including discounted car rental and discounted prices on the purchase of Avis/Budget cars* Above perks may vary based on full-time/part-time status and locationWhat We’re Looking For:Valid Driver’s LicenseMinimum 3 years of auto repair experience, holding 3 ASE (ability to acquire 2 additional ASE certificates within first year)Knowledgeable in the following areas covered by the ASE certification programs, including but not limited to, Engine Repair, Drive Train/Axles, Suspension/Steering, Brakes, Electrical, Heating/Air Conditioning and Engine Performance, Light Vehicle/DieselComfortable working in a mechanical shop with moderate or loud noise levelsMust have a complete set of tools required for auto repair and maintenanceBasic computer skills including typing, data entryMust be able to lift up to 50 pounds, continuously stand, bend, reach, walk, sit and kneel frequently, enter, exit and drive vehiclesMust be 18 years of age and legally authorized to work in the United StatesThis position requires regular, on-site presence and cannot be performed remotelyPrevious Original Equipment Manufacturer (OEM) experience preferred, providing an added advantage! Who We Are:Here at Avis Budget Group, you will be joining a team of 25,000 driven people, performing with purpose. Together, we’re moving the future of transportation forward with our innovative, customer-focused solutions.Our culture is performance driven, where we encourage and support each other to be at our best through leadership, training, tools, and rewards.We are proud to make a positive difference to the lives of our colleagues, customers, and communities where we operate.The fine print: Avis Budget Group is an equal opportunity employer – M/F/Veterans/Disabled.This role requires the ability to lift up to 50 pounds, continuously stand, walk, sit and kneel frequently, and enter and exit vehicles. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. This position may be with any affiliate of Avis Budget Group.Avis Budget Group is an Equal Opportunity Employer – Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other category protected by applicable law. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. This position may be with any affiliate of Avis Budget Group.HoustonTexasUnited States of America
Full Time
4/5/2025
Houston, TX 77002
(14.6 miles)
This position is responsible for spray equipment (e.g. airless, conventional, electrostatic, pressure washers) at the store or at customers’ job sites. This includes performing necessary repairs, providing training on equipment, and maintaining inventory as required. The individual selected for this role will be expected to work at Store #7585, located at: 6448 Long Point Rd, Houston, TX 77055-2606 Job duties involve contact with customers, which may include minors; and access to cash and other payment methods, electronic equipment, personal information, store merchandise and other items of value, and such access may be supervised or unsupervised. The Company therefore has determined that a review of criminal history is necessary to protect the business and its operations and reputation and is necessary to protect the safety of the Company’s customers, staff, employees, vendors, contractors, and the general public. Here, we believe there’s not one path to success, we believe in careers that grow with you. Whoever you are or wherever you come from in the world, there’s a place for you at Sherwin-Williams. We provide you with the opportunity to explore your curiosity and drive us forward. Sherwin-Williams values the unique talents and abilities from all backgrounds and characteristics. All qualified individuals are encouraged to apply, including individuals with disabilities and Protected Veterans. We’ll give you the space to share your strengths and we want you show us what you can do. You can innovate, grow and discover in a place where you can thrive and Let Your Colors Show! What is the Process to get Started Step 1 – Online Application Find the role(s) that interest you on our Careers page: https://jobsearch.sherwin.com/ Set aside 15 minutes to create your profile by entering or importing your details from one of our job board partners Step 2 – Digital Interview Upon review of your application, qualified candidates will be invited to complete a digital video interview via HireVue, our interview partner. The interview will consist of a few behavioral based questions You’ll be able to record and complete your video interview anytime, anywhere! While you can complete this video interview on your own schedule, we ask that this step be completed within 7 days of receiving an invitation Step 3 – In-Store Interview Your video interview is reviewed by a member of our Recruitment team and our top candidates are invited to meet with our team in a store, specialty wholesale branch, floorcovering facility or delivery service terminal. At Sherwin-Williams, part of our mission is to help our employees and their families live healthier, save smarter and feel better. This starts with a wide range of world-class benefits designed for you. From retirement to health care, from total well-being to your daily commuteit matters to us. A general description of benefits offered can be found at http://www.myswbenefits.com/. Click on “Candidates” to view benefit offerings that you may be eligible for if you are hired as a Sherwin-Williams employee. Compensation decisions are dependent on the facts and circumstances of each position, which will impact where actual compensation may fall within the stated wage range. The wage range listed for this role takes into account the wide range of non-discriminatory factors considered in making compensation decisions including geographic location; skill sets; experience and training; licensure and certifications; and other business and organizational needs. The wage range, other compensation, and benefits information listed is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. Qualified applicants with arrest or conviction records will be considered for employment in accordance with applicable federal, state, and local laws including with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act where applicable. Sherwin-Williams is proud to be an Equal Employment Opportunity/Affirmative Action employer committed to an inclusive and diverse workplace. All qualified candidates will receive consideration for employment and will not be discriminated against based on race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, marital status or any other consideration prohibited by law or by contract. As a VEVRAA Federal Contractor, Sherwin-Williams requests state and local employment services delivery systems to provide priority referral of Protected Veterans. Please be aware, Sherwin-Williams recruiting team members will never request a candidate to provide a payment, ask for financial information, or sensitive personal information like national identification numbers, date of birth, or bank account numbers during the application process. RESPONSIBILITIES Support the sales efforts at a Sherwin-Williams paint store, servicing wholesale and retail customers.Perform repairs on all types of spray equipment (e.g. airless, conventional, electrostatic, pressure washers.) at the store or at customers’ job sitesConduct hydraulic and warranty repairsRebuild pumpsRepair branch tinting and mixing equipmentEducate other employees and customers on spray equipmentMaintain an inventory of spray partsMinimum Requirements: Must be at least eighteen (18) years of ageMust be legally authorized to work in the country of employment without needing sponsorship for employment work visa status now or in the futureMust be able, with or without reasonable accommodation, to retrieve material from shelves and floor stacks and lift and carry up to 50 lbs. frequently and up to 70 lbs. on occasionMust be willing to work all scheduled hours, which may include evenings and weekends, with or without reasonable accommodationIf internal to Sherwin-Williams, you must have received at least a “meets expectations” (3) rating on your most recent performance appraisalIf internal to Sherwin-Williams, you must have completed all HR Cloud eLearning courses required for your current positionPreferred Qualifications:Have a valid, unrestricted Driver’s LicenseHave at least a High School diploma or GEDHave prior work experience repairing spray and/or hydraulic pumps and equipmentHave at least one (1) year experience working in a delivery, retail, or customer service positionHave previous work experience selling paint and paint related productsHave previous work experience operating tinting and mixing equipmentAbility to read, write, comprehend, and communicate in more than one languageAbility to read, write, comprehend, and communicate in Spanish
Full Time
4/5/2025
Pasadena, TX 77505
(24.7 miles)
Job DescriptionUnleash your potential with the Johnson Controls team!As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!What you will doWe are looking for a skilled Journeymen Chiller Mechanic who has worked in commercial, industrial, and/or institutional markets to join our team. Candidates should have a minimum of five years’ chiller experience, with knowledge of maintenance procedures, troubleshooting, and rebuilds of medium-large tonnage chillers of all brands.How you will do itYou will be assigned primary service accounts and responsibility for executing contract maintenance visits, inspections, site assessments, service requests and recommending necessary upgrades or repairs in order to prolong the equipment life cycle of our customers equipment.You will establish & maintain a positive relationship with customers, vendors and co-workers through effective oral and written communication skills via phone, computer, and face to face.You will be expected to provide quote estimates for labor & material repairs and upgrades as needed.You will represent the company by serving as the direct customer contact and be responsible for servicing products and equipment on assigned projects, ensuring customer satisfaction by identifying, analyzing, diagnosing and repairing equipment and systems at customer’s location.You will be required to use cutting-edge software and technology, along with a variety of hand-tools, rigging equipment, following blueprints or engineering specifications, to diagnose and repair equipment.You will be expected to continually enforce safety to the highest standards and maintain security and accountability of company issued and procured assets by recording use, wear and conditions.You will be expected to work as part of a team who is dedicated to delivering the highest standard of service to all its customers which may require the flexibility to work overtime and weekends as the business requires, including occasional overnight stays.You will be added to our on-call rotations, since we are a 24/7 service company.What we look forRequiredThree years of commercial, industrial, and/or institutional experience with all types of chillers, various compressor technologies, chiller control systems, and speed drives.Requires Mechanical Journeyman status.Member of Local Union 286 or willing to join.Operating knowledge of Microsoft Office software and working proficiency with handheld computers (i.e. smartphones, iPads).Adherence to company safety program.Valid driver's license.Appropriate licenses to work with refrigerant, boiler, and steam operational & service knowledge.EPA Universal Refrigerant Certification.Good verbal and written communication skills.Must be able to be on call nights and weekends on a schedule-rotating basis.PreferredMore than 5 years of commercial, industrial, and/or institutional experience with all types of chillers, various compressor technologies, chiller control systems, and speed drives.**This is a Bargaining Unit Position.
Full Time
3/25/2025
Humble, TX 77396
(4.4 miles)
StandardAero Houstonis a premier business aviation MRO (Maintenance, Repair, and Overhaul) facility specializing in the service of mid-sized corporate jets. We support an extensive range of aircraft models, including renowned brands such as Falcon, Hawker, Learjet, and Embraer. In addition to comprehensive airframe services, the facility features a state-of-the-art engine shop and test cell, performing overhauls on TFE731 and CFE738 engines.With a commitment to quality and customer satisfaction, StandardAero Houston is dedicated to keeping business aviation flying safely and efficiently. This Airframe Sheet Metal Mechanic willperform internal and external sheet metal repairs, modifications, and installations to all aircraft serviced in our facility. They will utilize their expert craftsmanship to fabricate various sheet metal parts (I-beams, doublers, triplers, stringers) by interpreting blueprints. This individual will succeed by calculating angles, diameters, and bend allowances, to cut, shape, and form various airframe structures. The right candidate will have extensive experience and confidence in their skills to build structural forms such as I-beams, doublers, stringers, and avionics trays. What to expect in this role: Perform structural aircraft repairs using appropriate sheet metal techniques and fasteners.Remove, replace, and relocate headers, stringers, doors, beams, and bulkheads while building up surfaces and structures to specifications.Install Service Bulletin kits using parts and instructions provided by OEM.Plan and develop schemes for sheet metal repairs and modifications by utilizing blueprints, sketches, service bulletins, OEM specifications, engineering orders, and other technical publications.Use precision measuring instruments, such as micrometers, calipers, and protractors, to accomplish repairs or modifications.Inspect aircraft in accordance with OEM Light or Heavy Maintenance manuals and evaluate removed components for serviceability, documenting discrepancies.Document all work accomplished in a clear, concise, and accurate manner.Accomplish Service Bulletins, Repair Letters, and Airworthiness Directives as required.Analyze various mechanical problems to determine causes and the best methods of repair. Basic Qualifications: A minimum of three (3) years sheet metal fabrication experience required.Prior experience working in the capacity of an Airframe Sheet Metal Specialist, Structural Technician or Aircraft Mechanic.Experience building I-beams, doublers, stringers, and performing corrosion control.Must be authorized to work in the U.S. without sponsorship.High School Diploma or GED equivalent required. Preferred Qualifications: Previous experience building bespoke structures, trays and/or mounts of all sizes and applications.A valid FAA Airframe License.Experience working along side A&P Mechanics and Avionics Technicians performing heavy maintenanceCorporate / Business Aviation or MRO experience strongly desired. Benefits that make life better: Sign-on Bonus and Relocation Assiatance EligibleComprehensive Healthcare Insurance401(k) with a 5% company match, immediately vested.Paid Time Off accrues on day one!Quarterly Bonus opportunitiesHealth & Dependent Care Flexible Spending AccountsShort & Long-Term Disability InsuranceLife and AD&D InsuranceCareer development and cross-training opportunities Raising the Standard of Excellence since 1911 With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers’ missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero’s policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero
Full Time
3/25/2025
Houston, TX 77090
(7.4 miles)
Overview: CONSIDER A CAREER WITH LAND ROVER SANTA FEWE HAVE THE BEST PAY IN THE MARKET AND RELOCATION ASSISTANCE!Land Rover Santa FeWe are looking to add qualified Master Automotive Technicians to our team!$10,000.00 Sign-On Bonus for Master Technicians | $5,000.00 Sign-On Bonus for Level 2 & 3 Technicians!In addition to our competitive pay, we offer our associates the following benefits:Relocation reimbursement available!**Job training and career advancement opportunitiesHealth, Dental, Vision, Life and Disability Insurance401(k) with company matchEmployee stock purchase programEmployee vehicle purchase programPerformance / longevity bonusesPaid time-offResponsibilitiesEfficient and accurate work in accordance with dealerships and factory standardsComplete system diagnostics and full automotive troubleshooting and testingMaintain an organized shop areaRoad-test vehicles to ensure quality workComply with company safety policies and proceduresCommunicate directly with service advisors regarding the status of the service workContinuously learn new technical information and techniquesAdhere to our values: Integrity, Transparency, Professionalism and TeamworkQualificationsAutomotive Technician Experience Required5-7 Years of Master Automotive Technician experience3-4 Years of Level 2 & 3 Automotive Technician experienceAutomotive technical or trade school degreeNational Institute of Automotive Service Excellence (ASE) certification(s) or certification(s) in: brakes, electrical/electronic systems or engine performance.High School Diploma or equivalentValid driver’s license in the state and good driving recordGroup 1 is a Fortune 250 company that owns and operates automotive dealerships and collision centers in the United States and United Kingdom. We offer our associates a team environment, great benefits and ongoing training and support. If you are in alignment with our values of integrity, transparency, professionalism, teamwork and respect - now might be the time for you to accelerate your career as part of the best company in automotive retail. Apply today or refer a qualified friend!All applicants must pass pre-employment testing to include: background checks, MVR, and drug testing in order to qualify for employment** Relocation Reimbursement must be approved prior to job acceptance Group 1 Automotive is an Equal Employment Opportunity EmployerIND1
Full Time
4/1/2025
Baytown, TX 77522
(10.7 miles)
We are seeking an energetic HeavyEquipment Mechanic to join our La Porte, TX team, who can change direction at a moment’s notice to maintain all mobile equipment to include but not limited to repairs, diagnosis, and troubleshooting. Performs daily preventative maintenance as assigned by supervisor.Health and Safety is our #1 priority and we live it 3-6-5!Competitive pay and benefitsComprehensive health benefits coverage after 30 days of full-time employmentGroup 401K with company matching component and Employee Stock Purchase PlanOpportunities for growth and development for all the stages of your careerGenerous paid time off, company paid training and tuition reimbursementPositive and safe work environmentsEnsures Health and Safety is the number one goal by following policies, processes, and acting in a safe manner at all timesDisassemble/Reassemble heavy and mobile equipment to troubleshoot, diagnose and repairFabricate metal pieces and replace gaskets as neededTroubleshoot, repair and test all equipment to ensure functionalityUtilize propylene cutting rigRepair equipment using MIG and/or stick weldingOther duties as assignedEnter data for repairs, diagnosis, preventative maintenance, inventory check out and timeComplete daily work and training on computersWhat does it take to work at Clean Harbors High School Diploma or equivalentMust pass Bennett Mechanical II test3+ years’ experience with heavy and mobile equipment repairDiesel Certification requiredAir Conditioning Certification or equivalent requiredCaterpillar and Kubota engine repair experience, certifications or education a plus!Hydraulics Systems troubleshooting repair requiredMust understand schematics to troubleshoot 12&24v heavy equipment systemsRequired cutting rig (propylene cutting torch)Valid Drivers’ LicenseComputer literateJoin our team today! To learn more about our company, and to apply online for this exciting opportunity, visit us athttps://careers.cleanharbors.com/Clean Harborsis the leading provider of environmental, energy and industrial services throughout North America. The Company serves a diverse customer base, including a majority of the Fortune 500 companies, thousands of smaller private entities and numerous federal, state, provincial and local governmental agencies. Through its Safety-Kleen subsidiary, Clean Harbors also is a premier provider of used oil recycling and re-refining, parts washers and environmental services for the small quantity generator market. Headquartered in Norwell, Massachusetts, Clean Harbors has waste disposal facilities and service locations throughout the United States and Canada, as well as Mexico and Puerto Rico.We are an equal opportunity in employer to all individuals regardless of race, color, religion, sex, age, national origin, pregnancy, familial status, disability status, veteran status, citizenship status, genetic information or any other characteristic protected under Federal, State or Local law.Clean Harbors is a Military & Veteran friendly company.*CH #LI-MM1
Full Time
4/1/2025
La Porte, TX 77572
(10.7 miles)
Safety-Kleen inLa Porte, TX is seeking an Equipment Repair Specialist to join their team! This position will be responsible for completing repairs and maintenance of parts washers at our internal and external sites. This is an entry level role that provides various growth opportunities within The Company. Why work for Clean Harbors Health and Safety is our #1 priority and we live it 3-6-5!Focus on maintaining sustainability and cleaning the EarthHourly pay between $21-23 with overtime opportunitiesComprehensive health benefits coverage after 30 days of full-time employment including 401K with Company matchOpportunities for growth and development for all the stages of your careerCompany paid training and tuition reimbursementEnsure Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and always acting in a safe mannerRepair broken, damaged, or worn equipment at Safety-Kleen and client locationsMaintain logs of repairs, breakage rates, customer relationships, equipment characteristics and trendsSwap and setup replacement equipment.Maintain inventories, tools, and other equipmentRepair and maintenance experienceValid Driver’s LicenseAbility to use various mobile devicesPerform physical functions per job requirementsSuccessfully complete a background check, drug test, and physical, by positionPrevious experience in mechanical, electrical, or appliance type repairManual labor experienceOrganizational skillsKnowledge of inventory management Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Clean Harbors is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or based on any other federal, state/provincial, or local protected class. Clean Harbors is a Military & Veteran friendly company. *SK
Full Time
4/1/2025
Pasadena, TX 77501
(10.7 miles)
****************************$5,000 SIGN ON BONUS******************************* Clean HarborsDeer Park, TXis looking for a Diesel Vehicle Mechanicto join their safety conscious team!This position will be responsible for the repairs and preventative maintenance of all company owned fleet. Why work for Clean Harbors Health and Safety is our #1 priority and we live it 3-6-5!Competitive wagesOpportunity for increase after 90 days!!!Comprehensive health benefits coverage after 30 days of full-time employmentGroup 401K/RRSP with company matching componentOpportunities for growth and development for all the stages of your careerAccess to company paid OEM certifications and trainings!Generous paid time off!Company paid training!Tuition reimbursement!Company provided uniforms and PPE!State of the art facilities, technology, and tooling Speak with a recruiter today to learn more!! Key Responsibilities: Ensuring that Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and acting in a safe manner at all times;Move company equipment safely on yard as needed;Assist drivers with addressing outstanding vehicle issues;Perform preventative maintenance tasks and inspections on company vehicles and equipment;Perform routine maintenance such as changing oil, checking batteries, and lubricating equipment, vehicles, and machinery;Complete daily checklist as requiredAssure that Equipment is properly parked/secured in compliance with facility permit and DOT requirements.Maintain facility via housekeeping dutiesPerforms other duties and tasks as assigned from time to time by management and will be required by the needs of the Clean Harbors business. What does it take to work for Clean Harbors High School diploma or equivalent requiredAbility to work in a team environment1+ years prior experience working on heavy duty-trucks and equipment.Must provide own basic toolsRelated mechanical certifications preferred (not required)Ability to pass a background, drug, and physical test upon hire 40-years of sustainability in action.At Clean Harbors, our mission is to create a safer, cleaner environment through the treatment, recycling, and disposal of hazardous materials.Clean Harborsis the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Join our safety focused team today! To learn more about our company, and to apply online for this exciting opportunity, visit us athttps://careers.cleanharbors.com/. Clean Harbors is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or on the basis of any other federal, state/provincial or local protected class. Clean Harbors is a Military & Veteran friendly company. “2022 Top Company For Women To Work For in Transportation” *CH
This website uses cookies for analytics and to function properly. By using our site, you agree to these terms.