Pay starts at $18.00 an hour and goes up depending on experience.
Our ideal candidate should have previous experience as a mechanic/technician in the trailer industry. Carpentry, welding and mechanic skills are a plus. We are looking for a self-motivated person with strong work ethics. We are willing to train the right applicant.
Duties will include: Read and understand the jobs and work order per company standards Preventative maintenance and repair all systems on Semi-Trailers to meet the standards set forth by DOT Remove and replace brakes, brake drums, hubs, seals, bearings, races and associated parts Repair electrical and lighting systems Repair or replace chassis components such as springs, spring hangers, equalizers, complete slider assemblies, axles, and sub frames Repair mud flap brackets and dolly leg assembles Repair or replace flooring, rub rails, doors and door trim Repair roofs, panels, nose panels, lower and upper rails Conform to all safety and health standards Assist fellow mechanic technicians
Benefits: Paid time off Paid holidays 401 Medical, Dental, Vision Life Insurance Long and Short Term Disability
Requirements: 1 - 3 years of experience in trailer repair or equivalent experience with welding, carpentry, and mechanic skills Valid driver’s license with a safe driving record. Must furnish own basic hand tools. Ability to stand, walk, bend, crouch, stoop, reach, stretch, step, climb, and / or sit frequently and lift heavy (up to 60lb) throughout the duration of the day Ability to work independently with minimal supervision Attention to detail and highly organized

Direct hire for a Full Time, onsite Equipment Service Mechanic to maintain our Fleet of Electric Forklifts, Pallet Jacks, and Floor Scrubbers for Amigos Meat Distributors Houston Facility. About 90% of our Forklift / Pallet Jack Fleet is electric, and 10% propane powered. The ideal candidate will be able to Troubleshoot, diagnose, and repair Crown models. Includes propane, electric motors, small motors, transmissions, drive axles, differentials, hydraulic systems, brake systems, steering systems, electrical systems, and lifting systems.
Salary range of $800/wk to $1000/wk depends on demonstrated knowledge, skills, abilities and verifiable work experience.
This is an immediate need, direct hire position with Amigos Meats. Your résumé goes directly to the hiring manager. All qualified candidates will be contacted.
Job Responsibilities include but are not limited to: Troubleshoot, diagnose and repair all Fleet Equipment Perform all assigned planned equipment maintenance services Maintain a service log and equipment cabinet of inventory Process paperwork after completion of each job Perform regular routine equipment inspections to identify potential problems and safety concerns and document. Manage your time and work schedule
Schedule: 8-hour shifts M-F Day shifts Weekends (work every other Saturday 8a-12p)
Benefits: Full Medical Dental Vision 401K w/ co. match Vacation Time Sick Time Holiday Pay Short-Term/Long-Term Disability
Qualifications: Minimum 2 years experience as a Forklift repair technician, GSE Technician, or small engine repair technician. Good Mechanical and electrical aptitudes, knowledge of electrical and electronic systems, internal combustion engines, and hydraulic systems. Good written/verbal communication and customer care skills Valid driver's license, good driving record and ability to safely operate lift trucks. Technical degree, previous forklift repair experience, welding experience and knowledge of various types of testing equipment preferred. Salary offered commensurate with knowledge, skills, abilities and verifiable work experience.
Amigos is an Equal Opportunity Employer.

The Time is Now! Start Your Career with the Houston Fire Department.
Per Chapter 143.023 of the Texas Local Government Code: A person may not take an entrance examination for a beginning position in the fire department unless the person is at least 18 years of age but not 36 years of age or older. A person may not be certified as eligible for a beginning position in the fire department if the person is 36 years of age or older.
Minimum requirements:
Fifteen (15) accredited college credit hours OR Two (2) years of full-time active military service with an honorable discharge as stipulated on a DD214 Member 4  Certified Applicants: Must meet one of the above requirements and have active Fire and EMT Certifications
Applicant must meet the above requirements by the Civil Service Exam date. Participates in classroom lectures, seminars, and practical training sessions as directed by the Houston Fire Department. Receives and participates in various types of training in fire suppression and emergency medical services up to and including paramedic certification. Participates in drills, demonstrations, and instruction in hydraulics, pump operation, maintenance, fire suppression, rescue, and emergency medical services. ONLY “on-line” applications will be accepted. On-line applications will be accepted until all testing slots are filled. 
Exam Information: Dates: 11/01/24, 12/06/24, 02/07/25, 03/07/25, 04/04/25, 05/02/25, 06/06/25 Time: 7:30 AM and/or 12:30 PM Location: Val Jahnke Training Facility, 8030 Braniff St, Houston, TX 77061. Bring your driver’s license or other photo ID. Due to the high volume of applications received, you will be contacted directly via email, should you qualify to take the exam. You will receive an email with the date to report to the testing site for the exam.
Benefits: Medical Dental Vision Wellness Life insurance Long-term disability Retirement pension 457 deferred compensation plan Employee Assistance Program 10 days of vacation each year 11 city holidays, plus one floating holiday Flexible schedules Professional development opportunities Transportation/parking plan Section 125 pretax deductions Dependent Care Reimbursement Plan Healthcare Flexible Spending Account
Qualifications: Immunizations/shot records will be required prior to starting the training academy. The minimum passing score is 70 percent on the written examination before the extra five (5) points for qualified veterans are added. Per Chapter 143.025of the Tex. Loc. Gov’t Code, an additional five points shall be added to the examination grade of an applicant who served in the United States armed forces, received an honorable discharge, and made a passing grade on the examination. Applicants who are eligible for extra military points must scan and attach a copy of their DD214 (Member-4) to their electronic application or send a copy to hfdhiringprocess@houstontx.gov. The last day to submit a DD214 is the date of the Civil Service Exam. No DD214s will be accepted at the test site. Texas Commission of Fire Protection State Fire Fighters Certification and Texas Department of State Health Services (TDSHS) Emergency Medical Technician Certification(s) will be subject to verification by the Human Resources Department. Texas Department of State Health Services Emergency Medical Technicians Certification as a Paramedic will be subject to verification by the Human Resources Department. An applicant may not take the examination for an eligibility list more than once. The eligibility list created as a result of this examination will be effective for a period of not less than 6 months or more than 12 months as determined by the Civil Service Commission. Passing applicants will be referred to the Human Resources Department Classified Careers & Services Division to continue processing. Any falsification in the application process will result in disqualification. Applicants must pass and complete all phases of the hiring process (civil service exam, physical ability test, interview, polygraph, background, immunizations, drug screen, medical examination).  HFD reserves the right to discontinue consideration in the hiring process based on an applicant conduct or verification of certain disqualifying factors.  Must not have ever been convicted of a Felony. Any Misdemeanor charge or divert/deferred adjudication or similar program may require an active TDSHS EMT certification prior to job offer. Applicants’ eligibility for hiring will be determined in rank order from the eligibility list.

T.G Meat Center is seeking to hire multiple meat cutters. This job requires a person to work in a cold refrigerated warehouse space. These are full-time positions, and we are looking to hire meat cutters with at least 1-2 years experience. Candidates that have experience cutting meat with commercial electric bandsaw are preferred. Work hours are 7am to 4pm, with occasional Saturdays and Overtime. All applicants will be contacted.
Benefits: Full Medical Dental Vision 401K Vacation Time Sick Time Holiday Pay Short-Term/Long-Term Disability
Qualifications: MUST be 18 years or older Able to utilize knives, saws, grinders and other equipment to perform meat cutting and trimming. Demonstrate the ability to identify different meat cuts. Willing to work individually as well as in a team. Maintain a safe environment- Personal Safety and Food Safety. Positive Attitude—makes everyone’s day better, including yours! Willing to learn and follow our processes. Ability to communicate verbally Be able to lift up to 60lbs Be physically able to load & unload a dolly or pallett Manufacturing experience is helpful, but not necessary.
T.G Meat Center  is a second chance employer. EOE. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Provide motor vehicle maintenance for the school bus, general purpose, and utility vehicle fleet.
Job Duties: Diagnose and repair all types of mechanical and electrical problems on school buses and all types of motor vehicles. Be the primary technician assigned to perform preventative maintenance and repairs, both major and minor for 20 School Buses and 20 Support Vehicles. Secure and maintain all assigned tools, parts and equipment. Substitute for any transportation employee as assigned by the supervisor. Maintain accurate records of all work performed. Comply with all safety measures and maintenance procedures as outlined in the department handbook. Substitute as a school bus driver when necessary. Perform other duties as assigned. Operates pressure washers, air compressor, tire machines, wheel balancer, bead setter, air jacks, air tools, grease guns and wrecker.
Qualifications: Minimum Education/Certification High School Graduate or GED. ASE Certification preferred. Must have five years experience working on trucks or buses. Must show proficiency and initiative as an expert mechanic. Possess or be able to obtain valid Class B Texas Commercial Driver’s License with all appropriate endorsements to drive a school bus within 120 days. Possess or be able to obtain valid Class A Texas Commercial Driver’s License will all appropriate endorsements to drive the district wrecker within 180 days. Be able to obtain a Vehicle State Inspection License.
Special Knowledge/Skills: Ability to read and comprehend vehicle maintenance manuals. Ability to operate all types of vehicle maintenance equipment.
The above statements are intended to describe the general purpose and responsibilities assigned to this job and are not intended to represent an exhaustive list of all responsibilities, duties and skills required.

Supervises and instructs mechanics, utility workers and cleaners in the repair, cleaning, and reconditioning of buses. Performs duties in a safe, efficient manner and in compliance with applicable rules and safety procedures.
Responsibilities and Specific Duties: Responsible for the supervision of mechanics, utility workers and cleaners and for the daily repair, cleaning, and reconditioning of buses. Supervises and instructs mechanics, utility workers and cleaners in the repair, servicing, and reconditioning of buses in assigned area. Provides technical assistance to personnel as necessary to assure quality and timely repairs. Coordinates upgrades, training and training schedule with General Foreman and Superintendent. Coordinates workflow from work area to work area. Responsible for all personnel and general administrative matters i.e., first step grievances, performance evaluations, disciplinary actions, payroll issues, etc. Maintains records of work performed and daily overtime, and absenteeism. Supervises maintenance and repair equipment, inspects tools and equipment for condition and proper use. Responsible for meeting equipment service demands in a timely manner. Ensures and maintains quality and safety standards. Research pertinent bus performance information and analyze data to determine bus down issues. Coordinates activities with Storeroom. Maintains yard control. Dispatches wreckers/T-Trucks/tire trucks for breakdown recovery and on street repairs. Keeps Superintendent and General Foreman informed on all matters of importance. Provides excellent customer service to METRO internal and external customers. Applies SMS (Safety Management System) methods and principles in daily routine and supports all aspects of the agency’s Public Transportation Agency Safety Plan (PTASP). Promotes safety awareness and follows safety procedures to reduce or eliminate accidents. Performs other job-related duties as assigned.
Benefits: Medical, Dental and Vision Insurance Competitive Pay Retirement Plan and Savings Plan Paid Vacation, Sick Days and Holidays Advancement Opportunities Life Insurance
Requirements: High school diploma or equivalent.  Additional vocational/training in heavy duty vehicle maintenance and supplementary training in body repair, transmissions, welding, electrical and/or air conditioning preferred. Minimum of 5 years extensive diesel-powered bus maintenance experience including direct mechanical/journey experience.  2 years previous lead/supervisory experience, or successful completion of the Career Advancement Program (CAP) is required. Supervisory experience in a mechanical maintenance/shop environment is preferred. Good communications (written/verbal) and interpersonal skills. Good decision making and organizational skills. General knowledge and use of part books and maintenance manuals. Familiar with labor relations/union agreements and related procedures. Basic knowledge of personal computers and related software. A valid Texas Commercial Driver’s License with a P (passenger endorsement) is required for the job and must meet METRO’s requirements regarding motor vehicle records. The ability to drive any Authority owned vehicle. Able to maintain or obtain additional certifications/licenses as required. Applicants must successfully pass a reading, math, and mechanical assessment prior to interview.
The Metropolitan Transit Authority of Harris County, Texas has a zero-tolerance drug and alcohol policy for all employees. All internal and external applicants will be required to undergo drug testing before employment and will be subject to further drug and/or alcohol testing throughout their employment.   Further, employees who perform safety-sensitive functions will submit to drug and/or alcohol testing in accordance to the Department of Transportation (DOT) and the Federal Transit Administration (FTA) regulatory requirements.   We provide equal opportunity to all qualified individuals regardless of race, color, religion, age, sex, national origin, veteran status, genetic information or disability.

If you're newly hired into certain bus mechanic job functions and employed with METRO for at least three months, you can begin to earn an incentive of up to $8,000.
Responsibilities and Specific Duties: Have a thorough knowledge of components on METRO’s revenue vehicles and their proper function as required for selected job classification. Show a proficient knowledge and use of test equipment and specialized tools related to selected classification requirements. Independently diagnose and repair all defects to completion in a timely manner under the supervision of a Mechanical Foreman. Perform duties in a safe, efficient manner and in compliance with all applicable rules and safety procedures. The specific job classification level will be determined on qualifications and experience.  Performs Preventive Maintenance Inspections (PMI) on revenue fleet. Inspects and/or test and observe defective equipment to troubleshoot and diagnose malfunctions of major components and complete assemblies. Performs diagnosis and repair of air brake systems, suspension, steering and alignment. Proper use and interpretation of laptop computer and related software. Must be able to read and interpret refrigerant, hydraulic, and pneumatic pressure gauges and understand the proper use of battery/ charging system analyzers. Services and diagnose electrical systems utilizing test instruments such as laptop computer, ID Reader/ Writer and able to read ladder logic charts. Assists in the servicing and diagnosing of exhaust after-treatment systems and electronic engine controls. Inspects and verifies dimensions, clearances, and torque of part fasteners to ensure conformance to factory specifications. Road tests vehicles when necessary to diagnose malfunctions or to ensure that they are working properly. Completes all required reports and records in a timely and accurate fashion. Assists in work direction with mechanics as assigned. Participates in on-going training in accordance with METRO’s Maintenance Training Program. Provides excellent customer service to METRO internal and external customers. Promotes safety awareness and follows safety procedures in an effort to reduce or eliminate accidents. Performs other job-related duties as assigned.
Benefits: Medical, Dental and Vision Insurance Competitive Pay Retirement Plan and Savings Plan Paid Vacation, Sick Days and Holidays Advancement Opportunities Life Insurance
Qualifications: High school diploma or equivalent.  Graduation from a related technical school preferred. Minimum three (3) years mechanical repair experience on automotive, medium or heavy duty equipment. Automotive Service Excellence Certificates (ASE) in brakes, steering/ suspension, and/or PMI preferred. A valid Commercial Texas Driver’s License with “P” endorsement is required and must meet METRO’s requirements regarding motor vehicle records. Must obtain Texas Commercial Driver’s License within 90 days of employment. The ability to drive any Authority owned vehicle. Able to maintain or obtain additional certification/licenses as required. Possess complete knowledge of all tools and equipment in shop related to job classification. Must maintain a basic set of personal hand tools to perform repairs related to job classification with exception of specialized tools provided by METRO. Ability to complete written reports, records and forms. Must be able to speak, read and write English.
The Metropolitan Transit Authority of Harris County, Texas has a zero tolerance drug and alcohol policy for all employees. All internal and external applicants will be required to undergo drug testing before employment and will be subject to further drug and/or alcohol testing throughout their employment.   Further, employees who perform safety-sensitive functions will submit to drug and/or alcohol testing in accordance to the Department of Transportation (DOT) and the Federal Transit Administration (FTA) regulatory requirements.   We provide equal opportunity to all qualified individuals regardless of race, color, religion, age, sex, national origin, veteran status, genetic information or disability.

Responsibilities: Forklift Drivers at Pol-Tex are responsible for safe operation of sit-down propane forklifts for the purpose of handling, loading, and unloading product. Drivers at Pol-Tex regularly use RF scanners and inventory control systems to pull orders, keep production lines supplied, and re-stock inventory racks. The role may involve additional responsibilities and opportunities as they become necessary and/or are assigned by management.
Find that perfect career match and enjoy a refreshing change at Pol-Tex, a division of Poly-America, L.P. Our Baytown area location is expanding and provides a great opportunity to work for an industry leader with a history of steady and stable growth.
Pol-Tex offers competitive compensation packages including Medical/Dental, paid vacations, paid holidays and 401(K).
If you are looking for a dynamic career opportunity that offers growth and stability then this could be the position for you.
Qualifications: One year of recent experience operating forklifts. The ability and desire to work safely. The ability to work a night shift or a day shift. 4 day on/4 day off rotation as assigned by management. Additional responsibilities and opportunities as they are assigned by management.

Pol-Tex, a division of Poly-America, L.P., a leading manufacturer of plastic products, is seeking a Maintenance Helper at its Mont Belvieu, Texas location. A successful candidate must be able to adjust to changing priorities and handle multiple tasks simultaneously.
Responsibilities: Assist with the observing mechanical devices in operation and listening to their sounds to locate causes of trouble. Dismantling devices to gain access to remove defective parts, using hoists, cranes, hand tools, power tools, and safety lock-out devices. Examining form and texture of parts to detect imperfections. Inspecting used parts to determine changes in dimensional requirements. Adjusting functioning parts of devices and control instruments. Repairing or replacing defective parts. Installing special functional and structural parts in devices. Testing the performance of devices. Lubricating and cleaning parts. Additional duties as become necessary and/or are assigned by management
Benefits: Competitive wages Comprehensive benefits package Paid vacations and holidays 401(K) On-site fitness facility and more
Qualifications: The ability to work in a fast paced environment Knowledge of and the ability to use basic hand tools Must be able to work rotating night shifts Must be able to adjust to changing priorities and handle multiple tasks Excellent written and oral communication and presentation skills Additional duties as become necessary and/or are assigned by management. 1-3 years of Industrial Maintenance experience preferred

Pol-Tex International, a division of Poly-America, L.P., is currently seeking an Industrial Mechanic to join our maintenance team. Pol-Tex International’s mission is to be the safest and most efficient choice in the polyethylene recovery, recycling, and compounding industries.  Our fleet, facility, and equipment combined with our experienced and dedicated professional staff make Pol-Tex International the premier gathering and recycling center for the Gulf Coast Region. Pol-Tex International offers competitive compensation packages including Medical/Dental, paid vacations and holidays, and 401(K). Responsibilities Industrial Mechanics at Pol-Tex International are responsible for the maintenance, installation, troubleshooting, and modification of new and existing industrial converting equipment. This role will document, recommend, and execute maintenance procedures. The Mechanic will be working in a manufacturing maintenance team. At times they will complete the mechanical testing of electro-mechanical equipment. Tasks include replacing, inspecting and dismantling defective parts, and implementing upgrades and part changeovers. The role may involve additional responsibilities and opportunities as they become necessary and/or are assigned by management.
The ideal candidate will possess: Some experience performing troubleshooting functions in a manufacturing environment. A strong desire to be hands on with their work and to follow processes through. The aptitude and desire necessary to be a good student of Pol-Tex processes, equipment, and procedures. Problem solving skills including troubleshooting of mechanical equipment.

Find that perfect career match and enjoy a refreshing change at Pol-Tex, a division of Poly-America, L.P. Our Baytown area location is expanding and provides a great opportunity to work for an industry leader with a history of steady and stable growth.

If you are looking for a dynamic career opportunity that offers growth and stability then this could be the position for you.
Pol-Tex offers competitive compensation packages including: Medical Dental Paid vacations Paid holidays 401(K)
Qualifications: The ideal candidate will possess:  Some experience performing troubleshooting functions in a manufacturing environment. The desire to expand knowledge and grow with the company. The ability and desire to work safely. The ability to work a night shift or a day shift.  4 day on/4 day off rotation as assigned by management. Additional responsibilities and opportunities as they are assigned by management.

Encuentra la Carrera perfecta y disfruta un refrescante cambio en Pol-Tex, division de Poly-America, L.P. Nuestra localidad en el area de Baytown se esta expandiendo y provee una gran oportunidad para trabajar en una industria lider en estabilidad y crecimiento.
Los empleados de produccion en Pol-Tex son responsables por la operacion segura de montacargas de gas para el proposito de manejo de cargar y descargar producto. El puesto de trabajo puede implicar responsabilidades adicionales a medida que se necesiten y/o sean asignadas por el gerente.
Responsabilidades: Operadores de montacargas en Pol-Tex son responsables por la operacion segura de montacargas sentado de gas para el proposito de manejo carga y descarga de producto. Los operadores de montacargas en Pol-Tex regularmente usan escaners RF y sistemas de control de inventario para  sacar ordenes , mantener las lineas de produccion suministradas y re llenar los bastidores de almacenamiento. La posicion puede incluir responsabilidades y oportunidades adicionales segun sean necesarias y/o asignadas por el gerente.
Calificaciones: Seis meses a un ano de experiencia reciente operando montacargas La habilidad y el deseo de trabajar de una manera segura La disponibilidad de trabajar un turno de dia o de noche. 4 dias de trabajo/ 4 dias de descanso, dias rotativos segun sean assignados. Responsabilidades adicionales y oportunidades segun sean asignadas por el gerente.

San Jacinto College Central Pasadena Campus is hiring an Energy Management Systems Manager for daily monitoring of Building Automation Systems, and to coordinate response to comfort concerns, provide analysis and administration of all assigned Energy Management projects and functions.
Duties include but are not limited to: Monitor the general operation of the Building Automation Systems to ensure proper operability and minimum energy consumption levels. Respond to occupant  comfort  concerns  while  ensuring compliance with campus climate guidelines. Review all monthly utility billing for accuracy. Identify, investigate, and report on all anomalies in water, gas, and electricity consumption. Provide monthly and quarterly reports on energy metrics at the individual and building level with weather normalized comparison per square foot. Manage ENERGY STAR and other Energy Benchmarking portfolios as assigned. Assist the conduct or coordinate facility site visits, retro-commissioning efforts, and ASHRAE audits (Level I & II). Maintain repair parts inventory list and order spare or replacement parts to agree service level. Work directly with the Director and procurement to create requisitions, purchase orders, and payment authorizations. Provide team level support as required to support departmental operations. This may occasionally involve working extended hours, nights, weekends, and holidays to ensure adequate functional coverage.
Benefits: We offer competitive benefits at reasonable costs through the Employees Retirement System of Texas (ERS). Benefits include medical, dental, vision, life insurance, 401K and more. Holidays off. San Jacinto College (SJC) offers a variety of voluntary retirement programs [403(b) and 457(b)] for its employees.
Qualifications: Bachelor of Science in engineering, environmental science, business, or an applicable technical degree. 1 to 3 years of experience in energy management, energy efficiency, sustainability, facility management, HVAC design, or working in a craft field such as electrical or HVAC. Valid Texas Driver’s license. Certified Energy Manager in training. Certified Energy Auditor in training TEMA Accredited Energy Manager in training. Basic Financial Management and Accounting skills. Self-motivated and quick, an adaptive learner in a changing environment. Excellent oral and written communication skills, with correct English usage, grammar, spelling, punctuation, and vocabulary. Ability to effectively communicate with varied audiences, e.g., faculties, staff, directors, consultants, and operators. Proficiency with Microsoft Office suite, including Word, Excel, PowerPoint, and Outlook.
Note: Due to the number of applications we sometimes receive, we might not be able to follow-up with every applicant individually. If your qualifications meet the requirements for the position, and you are selected for an interview, we will contact you   The San Jacinto College District is committed to equal opportunity for all students, employees, and applicants without regard to race, creed, color, national origin, citizenship status, age, disability, pregnancy, religion, gender, sexual orientation, gender expression or identity, genetic information, marital status, or veteran status in accordance with applicable federal and state laws.

San Jacinto College Central Pasadena Campus hiring an experienced HVAC Journeyman to help maintain and repair our College facilities HVAC systems and equipment in order to provide a safe and comfortable environment for students, faculty and staff.
The HVAC Journeyman is expected to maintain and repair HVAC equipment in the district. Perform preventative maintenance on equipment to ensure optimum efficiency and extend equipment life. Also, perform HVAC installation, repair and maintenance as needed. Perform preventive maintenance work as required and in the priority directed. Support and adhere to the College Safety Program. Maintain quality standards as set by the District. Check and test control circuits; check and test pneumatic control systems; diagnose HVAC problems and remove, repair and replace faulty parts. Be available for emergency after-hour work or to complete on-going projects, and be willing to respond to calls any time during a 24-hour period.
Duties include but are not limited to: Complete assigned preventative maintenance and repair work orders Perform equipment inspections to determine condition or potential problems Update material inventory for HVAC Department Trouble shoot water circulating pumps, cooling towers, air handlers, walk in coolers, walk in freezers, fan coil units, exhaust fans, split systems and roof top units Assist supervisor with water treatment systems Respond to hot and cold calls, diagnose problems and make adjustments or repairs as necessary Investigate all water leak issues within the buildings to determine the source Assist Plumbing and Electrical Departments when the need arises Other duties as assigned Carry college cell phone and on call 24/7
Benefits: We offer competitive benefits at reasonable costs through the Employees Retirement System of Texas (ERS). Benefits include medical, dental, vision, life insurance, 401K and more Holidays off San Jacinto College (SJC) offers a variety of voluntary retirement programs [403(b) and 457(b)] for its employees.
Requirements: Knowledge in maintenance, troubleshooting and repair of HVAC equipment including large centrifugal chillers, boilers, pumps and air handling units.  Ability to review and close out work orders in a computerized work order system. Knowledge in chemical water treatment systems for HVAC applications. Ability to diagnose and repair pneumatic and DDC control systems. Ability to read and interpret mechanical plans. Ability to rebuild pumps, compressors and other HVAC equipment High school education or GED Must have completed a recognized apprentice program, or have at least 5 years of experience directly related to the craft with no less than 3 years at the apprentice level.  Must be able to read and interpret electro-mechanical plans, specifications, and operational criteria and possess quality understanding of installed HVAC systems. Must have a valid Texas Driver’s License with a good driving record. May be required to successfully complete job ability testing. Preferred candidate should have at least 5 years of experience in hot water and chilled water systems of 100+ tons capacity with 2 years of experience in/or with related trades such as plumbing and electrical. Must have CFC refrigerant reclaimant certification at level 1 and 2 with a universal certification within one (1) year. State class A A/C license
Note: Due to the number of applications we receive, we are unable to follow-up with every applicant individually. If your qualifications meet the requirements for the position, and you are selected for an interview, we will contact you.   The San Jacinto College District is committed to equal opportunity for all students, employees, and applicants without regard to race, creed, color, national origin, citizenship status, age, disability, pregnancy, religion, gender, sexual orientation, gender expression or identity, genetic information, marital status, or veteran status in accordance with applicable federal and state laws.

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: Set up and operate a variety of CNC machine tools to produce pump parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures. NEW HIRES ARE ELIGIBLE FOR A $2500 SIGN ON BONUS! APPLY TO FIND OUT MORE! Second Shift Hours: 2:30 - 11:00 PM Responsibilities: Operating CNC Machines, primarily lather, or Equipment – Operate basic equipment and machines and carry out routine tasks.Operations Management – Carry out operational tasks by following established processes.Equipment Maintenance and Repair - Help to maintain and repair equipment by carrying out preparations and providing assistance.Health, Safety and Environment – Follow basic mandatory work instructions to safeguard the environment and the wellbeing of oneself and others.Operational Compliance – Follow a straightforward mandatory procedure to ensure that work is carried out to the required quality standards and/or to ensure adherence to external regulatory codes and internal codes of conduct.Precision Equipment Utilization – Interpret and use precision measuring equipment/instruments such as micrometers, dial indicators, and depth gauges.Instructions and Drawings – Ability to read and interpret blueprints and geometric tolerances.Internal Communications: Exchange information with people by having courteous interactions with them.Policy and procedures - Works with guidance to understand policies and procedures, while making sure they match organizational strategies and objectives.Other duties as assigned. Requirements: 5-7 years machining experience in a manufacturing or repair environment operating CNC lathes. Preferred Experience / Skills: EIA Program and Mazak TrollVerbal Communication – Uses clear and effective verbal communication skills to express ideas and request actions.Planning and Organizing – Works with guidance to plan, organize, and prioritize activities to efficiently meet business objectives .Health and Safety - Applies elementary concepts to manage and apply safe systems of work.HS Diploma / GED and 5-7 years relevant experience Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits! Req ID : R-11721 Job Family Group : Operations Job Family : OP Machining EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

Overview: With over 150 years of experience, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets. Headquartered in Southern California, CoolSys has more than 2,000 highly trained, field-based service and installation experts, serving more than 45,000 customer locations across North America daily. WHAT WE OFFER We are a large company serving many unique customers – because of this, we provide job stability and long-term opportunity for career growth. We invest in our technicians by offering:Paid Drive TimeEnjoy 100% pay for local travel between customer sites. Park your company vehicle at home for added convenience.Ongoing Education & TrainingExposure to a Large Variety of ProjectsIndustry-leading Benefit PackagesAdvanced support and tools designed to improve your workflowPay from $30 - $45/hour DOEWHY JOIN USWe understand that hiring great people in the field is the foundation of everything we do.Our employee benefits packages include:Competitive payincluding a quarterly bonus planMedical, Dental, Vision and Prescription coveragePaid vacation and holidays401(K) matchLife insurance, AD&D and long-term disabilityTuition reimbursementPaid online trainingandstate-of-the-arttraining facilityto invest in YOUR career growth Opportunities availablenationwideEmployee discountson vehicles, hotels, theme parks, select cell phone bills and so much morePet InsuranceLegal Plan, and ID Theft Protection Responsibilities: This position is responsible for assisting in the repair and overhaul of equipment, refrigeration, heating, and ventilation equipment to ensure customer needs are met efficiently, accurately, and on time.Provides service to the customer base by repairing and overhauling equipment, such as compressors, water pumps, air handlers, and electrical and mechanical control devices in a safe, efficient, and timely manner that exceeds customers’ expectationsProvides general repair work on refrigeration, heating, and ventilation equipment, such as air conditioning units, evaporative condensers, ice machine equipment, water pumps, gas furnaces, compressors, and electric motors in a safe and timely manner.Provides preventative maintenance activities for customers by diagnosing equipment malfunction and any operating deficiency of the mechanical equipment to ensure quality work performance for the customer base.Test malfunctioning systems and components using electrical and/or mechanical skills.Maintain legible corporate and personal records of work history.Provides department support by processing job tickets, and work orders to the necessary department promptly.Provide support by picking up, delivering, and installing cases.Perform work on minor construction and remodeling projects including startups of new installations.Drives company vehicle in a safe manner.Performs other related duties and projects as assigned by management. Qualifications: High school diploma/GED.EPA certification.Certification from an accredited vocational-technical or trade school is a plus!Minimum 5+ years of commercial refrigeration experience required.Experience working on refrigeration equipment in convenience stores or supermarkets is a strong plus.Familiarity with single systems and rack systems along with previous work on display cases and walk-in boxes is very helpful.Must have a good driving record and be able to work independently.Emergency on-call availability is a basic requirement.Must be able to lift to 60 lbs. with no assistance and also be able to sit and/or stand for several hours at a time. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

Description OverviewThe Maintenance Manager will report to the General Manager and oversee the fleet maintenance program to ensure safe and effective vehicle upkeep. A successful person in this position will have experience acting as adviser to upper management on potential issues with extensive experience in managing and producing reports. This person will have experience as a supervisor of supervisors and provider of guidance to technicians to ensure operational efficiency.ResponsibilitiesOversees a mixed transit bus fleet of 200+ vehicles with annual fleet miles in excess of 10 million miles and a staff of 50+ employees. Schedules employees for the department; ensures the effective supervision of mechanics and other shop workers.Selects, trains, motivates, and evaluates assigned personnelCoordinates work performed by outside vendorsOversees the development of efficient repair schedules; reviews repair cost estimatesApproves priority of maintenance and repairs based on availability of materials and parts and requirements of scheduled operationsHelps to ensure that company and client equipment is maintained and operating efficiently.Ensures that all vehicles are fueled, cleaned, and properly workingDevelops and implements safety policies and procedures for the department; maintains a safe working environmentParticipates in the development and administration of the operational budgetIdentifies opportunities for improving service delivery methodsEnsures that property, grounds, and facilities are clean and well organizedOther duties as requiredQualificationsHigh school diploma or equivalent requiredASE Certification preferred or willing and able to obtainCDL Class B (or higher) with passenger and airbrake endorsements preferred or able to obtain. (Training Available)5 years or more of progressively responsible experience in the repair and maintenance of all types of heavy-duty automotive and transit equipment, including at least 3 years of supervisory experienceGood written and oral communication skillsBroad understanding of all mechanical systems related to heavy-duty transportation vehiclesFamiliarity with laws/regulations associated with the safe operation of maintenance facilitiesAbility to read, interpret, and apply documents such as safety rules, operating and maintenance instructions, and procedure manuals.Ability to read blueprints, schematics, and other mechanical and/or electrical diagramsAbility to read and write routine reports, forms, and other documentation or correspondence - Working knowledge and proficiency with Microsoft OfficeAbility to organize and perform work efficiently, strong attention to detailRegularly required to stand; walk; use hands to manipulate, handle or feel; reach with hands or arms; and talk or hear.Physical RequirementsMajority of work is accomplished indoors and well-ventilated facilities with telephone and computer.The employee is generally subjected to long periods spent sitting, typing, or looking at a computer screen.Must be able to bend, twist and be able to lift 50lbsWe offerMedical/Dental/Vision health benefits401(K) retirement planPaid time offPaid holidaysAbility to advance your careerAbout Transdev: Cities, counties, airports, companies, and universities across the U.S. contract with Transdev to operate their transportation systems, maintain their vehicle and fleets, and deliver on mobility solutions. Transdev U.S. employs a team of 32,000 across 400 locations while maintaining more than 17,000 vehicles.Part of a global company, Transdev is a leader in mobility with operations in 19 countries, proudly operated by 110,000 team members from around the world. As an operator and global integrator of mobility, we are driven by our purpose. Transdev – the mobility company – empowers the freedom to move every day thank to safe, reliable, and innovative solutions that serve the common good. Find out more atwww.TransdevNA.comor watch an overview video athttps://youtu.be/ilO5cv0G4mQWhy Work at Transdev Excellent question! With over 800 locations across our divisions, you will have exponential growth opportunity. Furthermore, because safety is our number one priority, you will work in a safe and positive work environment every day. Lastly, you will receive a competitive benefits package that includes 401k with company match, paid time off, and a complete insurance plan after 30 days of employment (health, dental, and vision).This position is subject to background testing and drug screening.Transdev is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran statusApply today to join our team!The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified.The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions upon request.Transdev is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, gender identity, sexual orientation, religion or other legally protected status, or any other classification protected by federal, state, or local law.Drug-free workplaceIf based in the United States, applicants must be eligible to work in U.S. without restrictions for any employer at any time; be able to pass a drug screen and background check.California applicants: PleaseClick Herefor CA Employee Privacy Policy.

DOVER PRECISION COMPONENTS:Dover Precision Components ‘DPC’ (‘the Company’) is part of Dover Corporation’s (‘the Parent Company’) Pumps and Process solutions segment. DPC holds market leading positions globally and delivers performance-critical solutions across the oil & gas, power generation, marine, industrial, chemical and general processing markets. We design and manufacture mission-critical equipment components to deliver more affordable, cleaner energy solutions and enable manufacturers to operate more efficiently.WE DELIVER CUSTOMER SUCCESS Dover PrecisionComponents delivers products and services that enhance performance, improve safety, reduce carbon emissions,and accelerate clean energy adoption, through collaborative customer relationships, expert engineering, and an innovative culture. Our strong Company portfolio is comprised of long products and services offered under Cook Compression, Cook Mechanical Field Services, Waukesha Bearings, Waukesha Magnetic Bearings, Inpro/Seal, Bearings Plus, and FW Murphy Production Controls. Our global footprint reaches more than twelve locations in the Americas and more than six locations in Europe and China.BUILDING POTENTIAL. SUSTAINING PERFORMANCE. BOOSTING FUTURES.We are diligent in recognizing our employees’ needs and providing an enriching experience through professional developmental opportunities. Our authentic, collaborative company culture, combined with a competitive suite of health and welfare offerings, emulates who we are. We are Dover Precision Components, #LifeAtDPCWhat You'll Do:Sets up and operates manual machines, including but not limited to mills and lathes, to perform machining operations by performing the following duties.Responsibilities:Read, process sheets, blueprints, and sketches of part to determine machining to be done, dimensional specifications, set up, and operating requirements.Interpret work instructions.Identify, select and install proper tooling for operations being performed.Calculate proper feeds and speeds for a variety of steel grades, copper, brass, aluminum and bronzeIntuitively understand capabilities of tooling and machinery.Understand applicable quality systems and perform necessary quality inspections.Adhere to all Waukesha Bearings policies and procedures.Apply principles of Lean Manufacturing to reduced setup times and improve productivity.Seek out and identify Continuous Improvement opportunities.Actively participate in daily Continuous Improvement activitiesEmployee must be able to set up all necessary measuring equipment and routinely check the calibration of the equipment while measuring.Create and maintain a team focused work environmentWhat You'd Bring:Skills:Must be able to perform each essential duty satisfactorilyPrior experience with precision inspection equipment including, but not limited to, micrometers, calipers, height gauges, bore gauges,Education and Experience:One year certificate from college or technical school; or three to six months related experience and/or training; or equivalent combination of education and experience.Prior experience with precision inspection equipment including, but not limited to, micrometers, calipers, height gauges, bore gaugesProven ability to hold tight machining tolerances of less than .001”Mental/Visual/Physical Effort:The employee is regularly required to stand and talk or hearoccasionally required to walk; sit; use hands to finger, handle, or feel; and taste or smellmust frequently lift and/or move up to 50 poundsSpecific vision abilities required by this job include close vision, depth perception, and ability to adjust focus.Material Hazards:Regularly exposed to moving mechanical partsOccasionally exposed to fumes or airborneSets up and operates manual machines, including but not limited to mills and lathes, to perform machining operations by performing the following duties.We consider several job-related, non-discriminatory factors when determining the pay rate for a position, including, but not limited to, the position’s responsibilities, a candidate’s work experience, a candidate’s education/training, the position’s location, and the key skills needed for the position. Pay is one of the Total Rewards that we provide to compensate and recognize employees for their work.All qualified applicants will receive consideration for employment without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other factors prohibited by law.Attention Applicants: If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, please let us know. Likewise, if you are limited in the ability to access or use this online application process and need an alternative method for applying, we will determine an alternate way for you to apply. Please contactfor assistance with an accommodation. Kindly specify Job Requisition Number / Job Title and Location in response.#LI-LM1

Req ID:443260Address: 612 Pederson Rd Katy, TX, 77494Benefits: * Fuel Your Growth with Love's - company funded tuition assistance program* Paid Time Off * Flexible Scheduling * 401(k) – 100% match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Hiring Immediately Welcome to Love’s!Diesel Technicians work in a fast-paced environment and maintain clean places with friendly faces. You will interact with customers & drivers from all over, making their travels and their day better. Job Functions: Troubleshoot and repair light mechanical issues that may include wheel-end assemblies, electrical systems, suspensions, A/C, or engine componentsAssist customers with roadside servicesProvide preventative maintenance servicesAbility to move, lift 75+ pounds working in close quarters. Ability to work in various temperatures.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Work a rotating schedule that alternates between day and night as needed.Ability to obtain a medical card through the Department of Transportation. (paid by Love’s) Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer. Veterans encouraged to apply.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

Are you an experienced Systems Engineer looking for a new challenge and an opportunity to further advance your skills and career in a great working environment Join our fast-growing team supporting leading Aerospace companies! If you are a highly motivated individual, a self-starter with an entrepreneurial spirit and a genuine interest in technology, we have the perfect job for you!The RoleThe Senior Systems Engineer will be the engineering leader to support gas turbine programs including new product introduction, cost out, reliability improvements, engine delivery, test engineering, and root cause investigations of field issues. You will be responsible for establishing requirements, developing engineering plans to substantiate design changes to meet these requirements, and then leading the engineering teams through execution. This includes the engine level engineering integration and customer communications. You will also be the face of Quest to your customers. Through listening to customer challenges, and building on your previous experiences, you will find creative approaches that will solve their most difficult engineering problems.Roles & Responsibilities: Grasp the breadth of customer product offerings and provide guidance to the design, manufacturing, instrumentation, test, and business teams Execute a robust process of design, creation, and optimization of systems, consisting of identification and quantification of system requirements, creation of alternate system design concepts, performance of design trade studies, selection and implementation of the best designs and verification that the design is properly integrated and executedOverall lead on external Customer CommunicationLeads technical execution through development, production, and field support applying established processes. Drives design decisions, identifying technical risks and abatementsLead and influence teams without direct reportingInfluences product line major decisions and long-term strategies negotiating and considering business/customer needs and technical/budget constraintsDrives prioritization of technical needs for a given engine model, cross functional coordinationHas deep knowledge of the engine model characteristics, design, configuration, and historyManages interface between components and execution organizations as well as overall configurationProgram Management - Tracks/allocates/manages budgets and deliverable statusUses judgment to make decisions or solve complex tasks or problems in areas of operational/product management, manufacturing, technology or engineering Required Skills (Technical Competency):We're excited to talk to you if your qualifications meet the following criteria: Bachelor's degree in Engineering4-8+ years of experience in an engineering position3+ years in Gas Turbine or Gas Turbine Package Design, Test engineering, and AnalysisSystems/Module level design, integration, thinkingDevelopment and Test ExperienceCross functional project leadership, influence, communication skillsTeam Leadership and Program ManagementRoot Cause Problem SolvingClear thinker and effective problem solverLifecycle product managementStrategic program decision responsibilityMentoring/coaching experienceUS Citizen or Permanent Resident required Physical Requirements & Work Environment: Mostly Office Environments, Occasional Shop Floor involvement.Independence / work without direct supervisionSubstantial amounts of telephone, video conferencing and computer work.Heavily Regulated Industries with strict adherence to procedures.Flexibility to meet business deadlines by staying late or arriving early.Typical 8 hour days plus lunch / 40 hour weeks / core (required) hours are 9AM to 4PMAbility to use personal transportation to visit customer locations.Due to the nature of the work, all candidates must be a U.S. Citizen or Permanent Resident. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Clean Harbors Deer Park, TX is looking for a HM183 Tank Inspector to join their safety conscious team! The HM183 Tank Inspector is primarily responsible to perform visual, internal, pressure and leak tests on truck mounted tanks. As well as being responsible for tank testing on Hazardous Material certified tanks such as vac trucks, hydro excavators, oil tankers, guzzlers, tanker trailers, cargo tanks, and more. Must have 3+ years’ experience as a tank inspector (VIPK inspections) required; HM-183 Register Inspector (Tank Inspector)Why work for Clean Harbors Health and Safety is our #1 priority, and we live it 3-6-5!Competitive wagesComprehensive health benefits coverage after 30 days of full-time employmentGroup 401K/RRSP with company matching component.Opportunities for growth and development for all the stages of your careerGenerous paid time off!Company paid training!Tuition reimbursement!Company provided uniforms and PPE!State of the art facilities, technology, and toolingAccess to company paid OEM certifications and trainings! Ask a recruiter today for more information!Key Responsibilities: Ensuring that Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and acting in a safe manner at all times;Perform VIPK inspections [visual, internal, pressure, leakage];Timely and accurate completion of all required paperwork;Assist with other repairs and preventative maintenance in shop as required;Order parts and maintain inventory as required; Perform necessary tank test on units, and ensure they comply with all government and company standards and regulations;Perform repairs to tanks within the inspectors’ qualifications;Apply proper decaling to tanks;Maintain all tools and test equipment;Assist with finding qualified repair shops when necessary.What does it take to work for Clean Harbors 3+ years’ experience as a tank inspector (VIPK inspections) required;HM-183 Register Inspector (Tank Inspector) Certificate is strongly preferred;1+ years diesel mechanic experience with heavy-duty trucks and/or equipment required;Must have own set of basic tools, up to ½” (specialty inspector tools will be provided);Strong computer skills required;Valid Driver’s License is required;Experience operating heavy equipment is an asset. 40-years of sustainability in action. At Clean Harbors, our mission is to create a safer, cleaner environment through the treatment, recycling, and disposal of hazardous materials. Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Clean Harbors is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or on the basis of any other federal, state/provincial or local protected class. Clean Harbors is a Military & Veteran friendly company.

Quality Carriers, Inc. (QC), headquartered in Tampa, FL, is North America's largest bulk liquidchemical carrier. Through a network of more than 100 terminals and facilities, we transport a broad range of chemical products and provide our customers with value-added transportation services. Why do you want to work at Quality Carriers We offer the the following amazing benefits Competitive PayTool/Boot Reimbursement ProgramWeekly PayReferral ProgramSign on BonusesEmployee benefits ( Generous Paid Time Off/Holiday Schedule, in addition to Medical, Dental and Vision plans).Matching 401K Duties/Responsibilities: Diagnose and repair tractors and trailers. Perform annual/systematic 90 day inspections (trailers) on equipment as required. Ensure equipment meets Federal FHWA standards.Operate a yard hostler truck to move trailers within the facility yard and the shop as needed.Able to identify parts and supplies as needed.Adheres to all established safety (OSHA) and environmental policies and standards to include identification, use, and proper procedures for handling or disposal of hazardous waste.Clean, organize and maintain the work environment to ensure equipment longevity and workplace safetyUsing welding equipmentPerform miscellaneous duties as assigned. Required Skills/Abilities: Must possess at least 1 year of experience with general knowledge of equipment theory, principles and repair relating to diesel engines, air, and electrical, mechanical, and hydraulic systems.Must possess at least 1 year of experience with general knowledge of tractor and trailer maintenance, DOT rules and regulations, company policies and procedures. Education Not required (High school diploma, completion of G.E.D., or equivalent vocational school preferred) We offer competitive wages and employee benefits (Flexible spending accounts, generous Paid Time Off/Holiday Schedule, in addition to Medical, Dental and Vision plans). Quality Carriers is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, military/veteran status or other characteristics protected by law. Please note that per Quality policy, we do not accept unsolicited resumes from third-party recruiters unless such recruiters were engaged to provide candidates for a specified opening. Any employment agency, person or entity that submits an unsolicited resume does so with the understanding that Quality will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Pay is $ 26 - $28 / hour #CAZL ExperienceRequired1 year(s): Must possess at least 1 year of experience with general knowledge of tractor and trailer maintenance, DOT rules and regulations, company policies and procedures.1 year(s): Must possess at least 1 year of experience with general knowledge of equipment theory, principles and repair relating to diesel engines, air, and electrical, mechanical, and hydraulic systems.EducationPreferredHigh School or betterHigh School or better

COMPANY OVERVIEWAs the nation's largest producer of clean, carbon-free energy, Constellation is a company purposely-built to meet the challenges of the climate crisis. Constellation has been the leader in clean energy production for more than a decade and we are growing our company and capabilities. Now, we're accelerating, speeding our low-carbon or no-carbon power to more people in more places, day and night, providing our customers and communities with options to buy, manage and use energy as part of their decarbonization mission. The race is on to confront the climate crisis and Constellation is ready to meet the challenge. Come join us as we lead energy, together.TOTAL REWARDSConstellation offers a wide range of benefits and rewards, designed to help our employees thrive professionally and personally. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays and sick days and much more.This role will be considered for the O&M Tech level II and III. Leveling will be based on candidates past work experience. Power Plant Electrician - Operations and Maintenance TechnicianPRIMARY PURPOSE OF POSITIONThe primary responsibilities of this role will be to operate, troubleshoot, repair and maintain all mechanical,I/C, and electrical high voltage equipment with as required to support plant operations and maximize asset value.Hourly Rate Starts at $34.19 - $55.30, depending on level of experiencePRIMARY DUTIES AND ACCOUNTABILITIESUses computerized maintenance management system to maintain and control work order system spare parts inventory. Perform maintenance and repair work on plant equipment such as pumps, gearboxes, fans, turbines, bearings, boilers, pipe systems, valves and limitorque operators. (disassembly, part repair or replacement, assembly).Operates monitors and maintains turbines, generators, pumps, scrubber plants, industrial wastewater treatment plants, boilers, motors, combustion turbines and associated auxiliary equipment.Trains and develops other employees in performing preventive maintenance and routine equipment service activities. Practices situational leadership, environmental and safety stewardship.Leads equipment or system problem identification and recommends solutions.Perform predictive/preventive maintenance.Perform electrical maintenance on generators, transformers and MOV&rsquos.Perform troubleshooting on plant equipment such as power and control circuits, heaters, motors and transformers using electrical test instruments.Develops operating procedures for plant equipment to ensure consistent and safe operation.Performs all work during an assigned shift in a safe, continuous and efficient manner while maintaining environmental and housekeeping standards within federal, state and local guidelines. Performs work per Work Management processes and ensures safety using equipment Tag out process.Assists in requisitioning parts and supplies.Perform any other duties as assigned.POSITION SCOPEThe incumbent in this position must be able to communicate across all levels of the organization. Good knowledge of PLC's, Ovation and GE Mark 6 Digital Controls Systems.Qualifications - ExternalMINIMUM QUALIFICATIONSAssociates' Degree in Power Plant Technology, Engineering Technology, or Electronics ORHS Diploma with minimum of 18 months of trade or technical training in Power Plant TechnologySuccessfully complete the training requirements and time in job requirements for the position including previously passing the EEI TECH testElectrical backgroundAvailability for Day shift work and overtime as requiredGood oral and written communication skillsBasic computer skillsUnderstanding of power plant printsValid driver's license and access to an insured vehicleAbility to work in a power plant environment that includes climbing and walking long distancesAbility to lift a minimum of 50 pounds

Build an Aviation Career You're Proud OfAt StandardAero, we use our ingenuity and know-how to find solutions for the simple to the most complex challenges in aviation. Together, we get the job done and done well. Our stability, resources, and respectful culture supports you in building a solid career with a great team you can count on day in and day out for the long term.As an A&P Inspector you will ensure the airworthiness of customer aircraft and ensures that regulatory and company requirements are met. Maintain proper communication and coordination between Production and Inspection personnel to deliver the customer's product on time, in accordance with FAA regulations and company policies/procedures.Essential Duties: Inspects all types of aircraft (including engines, electrical instruments, structures, controls, environmental control systems, landing gear, accessories, etc.) before, during, and after maintenance to ensure compliance with FAA regulations, production approval holder and military specifications, service bulletins, and airworthiness directives.Determines the serviceability of aircraft systems, parts, and components using precision measuring guides, gauges, instruments, measuring devices, magnification, and non-destructive testing (if appropriately certified).Accomplishes preliminary, hidden damage, in-process, and final inspection of all articles repaired, maintained, inspected, or altered by the facility.Complies with all applicable Federal Aviation Regulations (FARs), Quality Procedures (QPs), and Local Work Instructions.Provides procedural guidance to technicians and delegated inspectors. Trains and assists technicians in proper work procedures and practices.Monitors work in progress to ensure proper paperwork, procedures, techniques, and methods as prescribed by maintenance manuals, overhaul manuals, approved engineering documents, and other FAA approved data are used. Documents inspection results in inspection paperwork and log books. Accomplishes final review of work order documentation prior to final release of articles. Ensures that work performed is accurately reflected on the work order.Researches logbooks, and prepares logbook entries and sign-offs for approval for Return to Service (RTS). RTS any article that is maintained or altered by the facility, and if applicable, certify (in the appropriate records) that the article is airworthy with respect to the work performed. Approves aircraft for return to service upon completion of maintenance and/or alteration. Reports conditions adversely affecting the airworthiness of an article under repair or alteration to the Quality Leader.Must be up-to-date on scope of required maintenance and inspection for customers and coordinates efforts to ensure a timely turnaround.Supports and adheres to all safety, environmental, and general housekeeping policies.Basic Qualifications:Must be authorized to work in the U.S.High School Diploma or GED equivalent required.A valid FAA Airframe and Powerplant (A&P) License.Minimum of 5 years verifiable experience as A&P Mechanic.Preferred Qualifications:Previous Honeywell TFE731 / CFE738 experience.NDT certification / knowledge. Fluent/Bilingual in Spanish.Benefits that make life better:Comprehensive Healthcare401(k) with 100% company match; up to 5% vestedPaid Time Off starting on day oneBonus opportunitiesHealth- & Dependent Care Flexible Spending AccountsShort- & Long-Term DisabilityLife & AD&D InsuranceLearning & Training opportunitiesRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture.About UsRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!What you will doWe are looking for a skilled Journeymen Chiller Mechanic who has worked in commercial, industrial, and/or institutional markets to join our team. Candidates should have a minimum of five years’ chiller experience, with knowledge of maintenance procedures, troubleshooting, and rebuilds of medium-large tonnage chillers of all brands.How you will do itYou will be assigned primary service accounts and responsibility for executing contract maintenance visits, inspections, site assessments, service requests and recommending necessary upgrades or repairs in order to prolong the equipment life cycle of our customers equipment.You will establish & maintain a positive relationship with customers, vendors and co-workers through effective oral and written communication skills via phone, computer, and face to face.You will be expected to provide quote estimates for labor & material repairs and upgrades as needed.You will represent the company by serving as the direct customer contact and be responsible for servicing products and equipment on assigned projects, ensuring customer satisfaction by identifying, analyzing, diagnosing and repairing equipment and systems at customer’s location.You will be required to use cutting-edge software and technology, along with a variety of hand-tools, rigging equipment, following blueprints or engineering specifications, to diagnose and repair equipment.You will be expected to continually enforce safety to the highest standards and maintain security and accountability of company issued and procured assets by recording use, wear and conditions.You will be expected to work as part of a team who is dedicated to delivering the highest standard of service to all its customers which may require the flexibility to work overtime and weekends as the business requires, including occasional overnight stays.You will be added to our on-call rotations, since we are a 24/7 service company.What we look forRequiredThree years of commercial, industrial, and/or institutional experience with all types of chillers, various compressor technologies, chiller control systems, and speed drives.Requires Mechanical Journeyman status.Member of Local Union 211 or willing to join.Operating knowledge of Microsoft Office software and working proficiency with handheld computers (i.e. smartphones, iPads).Adherence to company safety program.Valid driver's license.Appropriate licenses to work with refrigerant, boiler, and steam operational & service knowledge.EPA Universal Refrigerant Certification.Good verbal and written communication skills.Must be able to be on call nights and weekends on a schedule-rotating basis.PreferredMore than 5 years of commercial, industrial, and/or institutional experience with all types of chillers, various compressor technologies, chiller control systems, and speed drives.**This is a Bargaining Unit Position.#TechHiringJohnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

AutoReqId: 18066BR Pay Class: Hourly Hourly Pay Rate: 21.00 - 25.00 DOE Department: Maintenance Line of Business: Aggregates Position Type: Full-Time Job Posting: Heidelberg Materials is seeking a Plant Maintenance Mechanic for our South Texas Stabilized Sand business located in Houston, TX. Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America, previously known as Lehigh Hanson, operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. What You'll Get To Do Repair and maintain, in accordance with diagrams, sketches, operation manuals, and manufacturer's specifications, machinery and mechanical equipment, such as engines, motors, pneumatic tools, conveyor systems, and production machines and equipment, using hand tools, power tools, and precision measuring and testing instrumentsObserve mechanical devices in operation and listen to their sounds to locate causes of troubleLubricate machinery, change parts, or perform other routine machinery maintenanceReassemble machines after the completion of repair or maintenance workStart machines and observe mechanical operation to determine efficiency and to detect problemsInspect or test damaged machine parts, and mark defective areas or advise supervisors of repair needsLubricate or apply adhesives or other materials to machines, machine parts, or other equipment, according to specified proceduresInstall, replace, or change machine parts and attachments, according to production specifications What We Are Looking For Minimum 1 year of welding and fabrication experience required. Weld and torch, certification a plusMinimum of 6 months of hands-on maintenance experience (or formal technical training), troubleshooting and repairKnowledge of hydraulics and pneumaticsAvailable to work flexible hours, days as well as an average of 50 hrs. per week as neededKnowledge of mechanical moving parts (chains, bearings and rollers)Ability to use a variety of hand tools, power tools, shop machines, hoists, etc.Ability to read and fabricate from drawingsHigh School Diploma or equivalent preferredPhysical Requirements: sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below shoulder, work extended periods of time in same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 75 lbs., work in confined spaces, capable of wearing respiratory and other personal protective equipmentMSHA Part 46 Training a plus No search firms please Heidelberg Materials is a Drug Free Workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

D&S Community Services, a part of the Sevita family, provides community-based services for individuals with intellectual and developmental disabilities. Here we believe every person has the right to live well, and everyone deserves to have a fulfilling career. You’ll join a mission-driven team and create relationships that motivate us all every day. Join us today, and experience a career well lived.Maintenance AssociateHouston, TX Pay: $18/ hourSchedule: Monday - Friday 8a-4:30p Your Role Providing repair and upkeep services for the residences of our clients, which may involve troubleshooting plumbing or electrical problems, fixing appliances, etc.Conducting inspections and addressing damages in different parts of buildings.Performing painting and surface refinishing tasks.Applicants must possess their own tools for the tasks.Assisting with basic vehicle maintenance, such as changing a flat tire or replacing a brake light bulb. Qualifications: High School diploma or equivalentApplicants must possess their own toolsMinimum 1 year of related experienceWorking knowledge of and ability to handle all maintenance and electrical equipmentAbility to manage/prioritize multiple tasksEffective communication skills and well-developed problem-solving skillsExceptional attention to detail and a commitment to quality in everything you do Why Join Us Full, Part-time, and As-Needed schedules availablePaid Time Off and Health benefits to employees working a minimum of 30 hours/weekPaid training and holiday payCareer development and advancement opportunities across a nationwide networkWork with some of the best co-workers you could ask for and see your impact on the lives of those individuals we serveSince our funding comes from Federal and State payers, we offer stability and secure work opportunities We have meaningful work for you – come join our team – Apply Today!Sevita is a leading provider of home and community-based specialized health care. We believe that everyone deserves to live a full, more independent life. We provide people with quality services and individualized supports that lead to growth and independence, regardless of the physical, intellectual, or behavioral challenges they face. We’ve made this our mission for more than 50 years. And today, our 40,000 team members continue to innovate and enhance care for the 50,000 individuals we serve all over the U.S. As an equal opportunity employer, we do not discriminate on the basis of race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, disability, genetic information, veteran status, citizenship, or any other characteristic protected by law.

Automotive Services SpecialistWe are seeking an Automotive Services Specialist to expand and maintain our network of Approved Auto Repair facilities. This role will be responsible for developing and improving our strategic relationships with automotive repair business partners for the Approved Auto Repair (AAR) program.What You’ll Do:Performing onsite inspections and evaluations of AAR facilities to ensure compliance with Club Standards and Criteria.Working with facility owners and managers on proper repair procedures and documentation requirements for Club members.Collecting past due annual fees owed by AAR facilities.Investigating and resolving issues between members and AAR facilities regarding accuracy of diagnosis, repair quality, cost of repairs, and authorization.Identifying, cold calling, and contracting prospective facilities in accordance with Club Standards and Criteria.Networking to develop and maintain industry relationships.Providing automotive consultation to Club members, AAR facilities, and other Club departments.Monitoring facility program compliance and addressing any outstanding issues.Training Club employees on the importance of AAR referrals and proper use of club technology for referrals.Collaborating with facility management on marketing and co-branding of facilities.Assisting with other duties and responsibilities as assigned or required.What You’ll Need:Minimum of 10 years comprehensive, hands-on experience in the automobile repair industry, service writing and management of automotive facilitiesAutomotive Service Excellence (ASE) "Master Automobile Technician" Certification (A1-A8) and C1 Automotive Service Consultant required.Familiarity with Mitchell1 and All Data estimating and repair software.Proficiency in using Tablet PC/laptop and mobile operating systems and applications, including Microsoft Office.Excellent communication skills, both written and oral.Remarkable benefits:• Health coverage for medical, dental, vision• 401(K) saving plan with company match AND Pension• Tuition assistance• PTO for community volunteer programs• Wellness program• Employee discounts (membership, insurance, travel, entertainment, services and more!)Auto Club Enterprises is the largest federation of AAA clubs in the nation. We have 14,000 employees in 21 states helping 17 million members. The strength of our organization is our employees. Bringing together and supporting different cultures, backgrounds, personalities, and strengths creates a team capable of delivering legendary, lifetime service to our members. When we embrace our diversity – we win. All of Us! With our national brand recognition, long-standing reputation since 1902, and constantly growing membership, we are seeking career-minded, service-driven professionals to join our team."Through dedicated employees we proudly deliver legendary service and beneficial products that provide members peace of mind and value.”AAA is an Equal Opportunity Employer

Do you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Who We Are Invitation Homes is a team of more than 1,400 associates who come from all walks of life. We call different communities “home," but our shared values bind us together. Invitation Homes is a place where possibility lives.The market teams include our Leasing, Property Management and Rehab, Turns & Maintenance professionals. Together, our dedicated associates work hard to build excellent resident experiences while maintaining high-quality homes and ensuring potential residents are presented with a rental property they can’t refuse.Your Role on the Team As a Maintenance Technician at Invitation Homes, you will be performing high-quality maintenance work in our single-family rental homes while providing outstanding customer service to our residents. This includes but is not limited to the following tasks:Completing maintenance service requests across multiple tradesProviding excellent customer service and promoting a quality living experience for all residentsCompleting regular ProCare visits in residents’ homes to perform proactive maintenance and repairsEducating residents regarding all maintenance topicsCompleting general property condition assessments at all property visits and alerting the property management team when items require immediate attentionReviewing and using Technician-specific reports to find opportunities for improvementPerforming repairs in vacant properties while they are on-the-market or during the turn processProperly using and caring for company-supplied tools, materials, and vehiclesPerforming other duties as assignedYour Experience Includes High School diploma or equivalentOSHA 10 is required (new hires will have up to 90 days to complete OSHA 10 certification if not already certified).Proven experience in residential repairs and maintenance, other building maintenance or related experience.Understanding of residential construction and mechanical systems and ability to perform general repairs in some of the following: plumbing, electrical, carpentry, sheetrock, exterior structural, HVAC (minor) and appliances. Some training will be provided.Excellent customer service and interpersonal skills as well as strong verbal and written communication skills; multi-lingual a plusComfortability using mobile devices (i.e. iPad and/or iPhone) and various mobile applicationsMust possess a current driver's license, automobile insurance, and any other licenses and/or certification as required by state lawThe following certifications are preferred but not required:EPA Certification, Type I and IIHVAC CertificationCPO certification (pool)Ability to be at work on a regular and consistent basis including weekends and holidays as neededAbility to provide basic hand and power toolsAbility to perform work that requires the following:Frequent climbing, reaching, use of fingers, stooping, kneeling, crawling, pushing, pulling, lifting, talking, and hearingAbility to lift and/or move an excess of 50 pounds or more and operate standard maintenance equipment as assignedWhy Us We stand for flexibility, opportunity, and a home that people can make their own. It’s as true for our associates as it is for our residents. Just like we help our residents live freer, we liberate our associates’ careers, too. Our associates know that goals matter, potential is unlocked, and careers thrive. Invitation Homes isn’t just a workplace but a possibility place. We offer each new associate:Competitive pay and an annual bonus program for all associatesGenerous paid time off plans including vacation accrual, sick time, volunteer time, and standard and floating holidays401k with matching company contributionsAwesome work environment with casual dressTeam events and gatheringsEmployee resource groups: Together with Women, Asian Alliance, Black Collective, Juntos, Gen Next, and Open Invitation.Build a foundation here and apply today!Salary Range$19.11 - $33.13Compensation and BenefitsTo attract and retain top talent, we're pleased to offer competitive compensation and benefits, including:Annual bonus programHealth, dental, vision, and life insuranceLong-term and short-term disability insuranceGenerous paid time off plans include vacation accrual, sick time, standard holidays and floating holidays401(k) with company matching contributionsAwesome work environment with casual dressTeam events and gatherings (Pre- and Post-Covid)Invitation Homes is an equal opportunity employer committed to fostering a diverse, inclusive and innovative environment with the best associates. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, Veteran status or any other factor protected by applicable federal, state or local law. If you have a disability or special need that requires accommodation, please contact us at .To all recruitment agencies: Invitation Homes does not accept agency resumes. Please do not forward resumes to Invitation Homes employees. Invitation Homes is not responsible for any fees related to unsolicited resumes.

Our client, a leading innovator in robotics manufacturing, is seeking a Mechanical Engineer to join their team. As a Mechanical Engineer, you will be part of the Product Design and Engineering Department, supporting cross-functional teams and suppliers. The ideal candidate will have strong problem-solving skills, attention to detail, and the ability to collaborate effectively across multiple disciplines. Job Title: Mechanical EngineerLocation: Richmond, TXPay Range: $40.00-44.50 per hour What’s the Job Design and model cable routing and harnesses to ensure no manufacturing/assembly issues Provide design for X guidance/feedback on electromechanical designs Qualify production processes using dimensional data, control plans, and PFMEAs Mentor team members and design engineers on best practices for manufacturing tolerances using GD&T Solve technical problems across a broad range of manufacturing commodities What’s Needed Proven experience in mechanical design or manufacturing, specifically within robotics Strong knowledge of cable routing, harnesses, and electromechanical systems Experience with GD&T and product lifecycle management Ability to lead root cause analysis and drive quality improvement projects Willingness to travel 30-50% (domestic) What’s in it for me Opportunity to work with a dynamic and supportive team Involvement in impactful projects that drive business growth Competitive salary and benefits package Career development and growth opportunities Work in an innovative and technology-driven environment If this role interests you and you’d like to learn more, click apply now and a recruiter will be in touch with you to discuss this great opportunity. We look forward to speaking with you! About ManpowerGroup, Parent Company of: Manpower, Experis, Talent Solutions, and Jefferson Wells ManpowerGroup® (NYSE: MAN), the leading global workforce solutions company, helps organizations transform in a fast-changing world of work by sourcing, assessing, developing, and managing the talent that enables them to win. We develop innovative solutions for hundreds of thousands of organizations every year, providing them with skilled talent while finding meaningful, sustainable employment for millions of people across a wide range of industries and skills. Our expert family of brands – Manpower, Experis, Talent Solutions, and Jefferson Wells – creates substantial value for candidates and clients across more than 75 countries and territories and has done so for over 70 years. We are consistently recognized for our diversity as a best place to work for Women, Inclusion, Equality, and Disability, and in 2022 ManpowerGroup was named one of the World's Most Ethical Companies for the 13th year - all confirming our position as the brand of choice for in-demand talent.

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: The Manual Machinist will set up and operate a variety of machine tools to produce precision parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures. This will be a 2nd shift opportunity, Overtime may be required. Responsibilities: Operating Manual Machines, Manual Lathe, VTLOperating Machine or Equipment – Operate basic equipment and machines and carry out routine tasks.Operations Management – Carry out operational tasks by following established processes.Equipment Maintenance and Repair - Help to maintain and repair equipment by carrying out preparations and providing assistance.Health, Safety and Environment – Follow basic mandatory work instructions to safeguard the environment and the wellbeing of oneself and others.Operational Compliance – Follow a straightforward mandatory procedure to ensure that work is carried out to the required quality standards and/or to ensure adherence to external regulatory codes and internal codes of conduct.Precision Equipment Utilization – Interpret and use precision measuring equipment/instruments such as micrometers, dial indicators, and depth gauges.Instructions and Drawings – Ability to read and interpret blueprints and geometric tolerances.Internal Communications – Exchange information with people by having courteous interactions with them.Policy and procedures - Works with guidance to understand policies and procedures, while making sure they match organizational strategies and objectives.Other duties as assigned. Requirements: Equipment Experience – 2+ years machining experience in a manufacturing or repair environment operating manual lathes, milling machines.HS Diploma / GED and 3-5 years relevant experience Preferred Experience / Skills: Verbal Communication – Uses clear and effective verbal communication skills to express ideas and request actions.Planning and Organizing – Works with guidance to plan, organize, and prioritize activities to efficiently meet business objectives.Health and Safety - Applies elementary concepts to manage and apply safe systems of work Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits Req ID : R-10388 Job Family Group : Operations Job Family : OP Machining EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

Overview: With over 150 years of experience, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets. Headquartered in Southern California, CoolSys has more than 2,000 highly trained, field-based service and installation experts, serving more than 45,000 customer locations across North America daily. WHAT WE OFFER We are a large company serving many unique customers – because of this, we provide job stability and long-term opportunity for career growth. We invest in our technicians by offering:Ongoing Education & TrainingExposure to a Large Variety of ProjectsIndustry-leading Benefit PackagesAdvanced support and tools designed to improve your workflowPAY FROM $30-45/HR DOESIGN ON BONUS UP TO $3,000 DOEWHY JOIN USWe understand that hiring great people in the field is the foundation of everything we do. Our employee benefits packages include:Competitive payincluding a quarterly bonus planMedical, Dental, Vision and Prescription coveragePaid vacation and holidays401(K)matchLife insurance, AD&D and long-term disabilityTuition reimbursementPaid online trainingandstate-of-the-arttraining facilityto invest in YOUR career growth Opportunities availablenationwideEmployee discountson vehicles, hotels, theme parks, select cell phone bills and so much morePet InsuranceLegal Plan, and ID Theft Protection Responsibilities: The HVAC/R Technician role is primarily responsible for performing repairs and maintenance to a variety of HVAC and Refrigeration equipment including air conditioning, electric motors, heating units, heat pumps, hermetic compressors, commercial furnaces, boilers, burners, intake and exhaust fans, economizers and humidifiers, RTUs, remote condensing units, ice machines, walk-in coolers & freezers, and upright refrigerators & freezers. Qualifications: 5+ years of commercial experience as an HVAC and Refrigeration TechnicianActive EPA CertificationValid driver's licenseExcellent customer relations and interpersonal skillsMechanical aptitude and troubleshooting skillsAbility to safely lift to 50 lbs., climb and balance on a ladder, and work in elevated/high locations. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

*************$5,000 SIGN ON BONUS************* Clean Harbors is seeking a Diesel Vehicle Mechanic for our hub in Deer Park, TX. As Vehicle Diesel Mechanic, You will be responsible for conducting routine maintenance and repair on our company fleet, which includes both heavy and light duty vehicles. Day to day consist of working on drive lines, transmissions, suspensions, clutches, air brakes, and any other maintenance needed. Must be proficient in DOT Inspection and Preventative Maintenance. Must have own tools Why work for Clean Harbors Health and Safety is our #1 priority and we live it 3-6-5!Competitive wages (Hourly Pay; Time & 1/2 after 40hr)Comprehensive health benefits coverage after 30 days of full-time employmentGroup 401K with company matching componentGenerous paid time off, company paid training and tuition reimbursementPositive and safe work environmentsOpportunities for growth and development for all the stages of your careerKey Responsibilities: Ensuring that Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and acting in a safe manner at all timesPerform preventative maintenance tasks and inspections on company vehicles and equipmentAbility to troubleshoot, diagnose and repair equipment and vehiclesSafely operates gauges, forklifts, shunt truck, torches, grinders, and various hand and power toolsPerform other duties and tasks as assigned from time to time by management and will be required by the needs of the Clean Harbors businessWhat does it take to work for Clean Harbors At least one year experience preferred with light to heavy duty maintenance and repairHS Diploma or GED equivalentComputer experience is a plusAbility to work well in team environmentMust have own tools Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Clean Harbors is a Military & Veteran friendly company. *CH

Quality Carriers, Inc. (QC), headquartered in Tampa, FL, is North America's largest bulk liquidchemical carrier. Through a network of more than 100 terminals and facilities, we transport a broad range of chemical products and provide our customers with value-added transportation services. Why do you want to work at Quality Carriers We offer the the following amazing benefits Competitive PayTool/Boot Reimbursement ProgramWeekly PayReferral ProgramSign on BonusesEmployee benefits ( Generous Paid Time Off/Holiday Schedule, in addition to Medical, Dental and Vision plans).Matching 401K Job Summary: Responsible for performing preventative maintenance, special inspections and general repairs on tractor and trailer units in accordance with DOT, federal and state regulations and company standards. Determines the overall mechanical condition of tractors, trailers and associated equipment, diagnoses component malfunctions and initiates repair actions. Repairs components by replacing worn or damaged parts with new or reconditioned parts. Corrects vehicle deficiencies by removing, repairing, adjusting, overhauling, assembling, disassembling, and replacing major assemblies, sub- assemblies, components, parts, or systems, such as, brakes, hubs, bearings, seals, electrical, air conditioning, fuel, steering, hydraulics; control linkages, clutches, and traction units. Use a welder to make repairs as needed. Uses technical publications or automated systems in maintaining vehicles to prescribed manufacturers’ maintenance schedules and for researching parts. Properly annotates all maintenance and labor performed in maintenance management software. Duties/Responsibilities: Diagnose and repair tractors and trailers. Perform annual/systematic 90 day and HM-183 inspections (trailers) on equipment as required. Ensure equipment meets Federal FHWA standards.Operate a yard hostler truck to move trailers within the facility yard and the shop as needed.Order and receive parts and supplies as needed.Adheres to all established safety (OSHA) and environmental policies and standards to include identification, use, and proper procedures for handling or disposal of hazardous waste.Clean, organize and maintain the work environment to ensure equipment longevity and workplace safetyUsing welding equipmentPerform miscellaneous duties as assigned.Perform HM-183 DOT inspections (P,V,I,K,L,HS,UC,) (EPA-M27) Required Skills/Abilities: Must possess at least 3 years of experience in repair and service of trailers and medium duty trucks.Required to have demonstrated knowledge of vehicle and equipment theory, principles and repair relating to diesel engines, air, electrical, mechanical, and hydraulic systems.Required to have demonstrated knowledge of tractor and trailer maintenance, DOT rules and regulations, company policies and procedures.Ability to use vehicle diagnostic software.Up to 3 years as a fleet mechanic. DOT HM-183 certification, Training or experience. ASE Certification not required but recommended. Education and Experience: High school diploma, completion of G.E.D Required. We offer competitive wages and employee benefits (Flexible spending accounts, generous Paid Time Off/Holiday Schedule, in addition to Medical, Dental and Vision plans). Quality Carriers is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, military/veteran status or other characteristics protected by law. Please note that per Quality policy, we do not accept unsolicited resumes from third-party recruiters unless such recruiters were engaged to provide candidates for a specified opening. Any employment agency, person or entity that submits an unsolicited resume does so with the understanding that Quality will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Pay is $28 - $32 / hour #CAZL ExperienceRequired2 year(s): Fleet mechanic experience 3 year(s): DOT HM-183 certification, Training or experience.3 year(s): Knowledge of tractor and trailer maintenance, DOT rules and regulations, company policies and procedures.3 year(s): Experience in repair and service of trailers and medium duty trucks.EducationRequiredHigh School or better

Req ID:443206Address: 3940 N. McCarty Houston, TX, 77013Benefits:* Fuel Your Growth with Love's - company funded tuition assistance program * Paid Time Off * Flexible Scheduling * 401(k) – 100% match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Hiring Immediately Welcome to Love’s!Diesel Apprentices work in a fast-paced environment and maintain clean places with friendly faces. You will interact with customers & drivers from all over, making their travels and their day better. Are you mechanically inclined with no professional experience No problem! We will teach you! In the apprentice program, you can expect to learn:Electrical diagnostics and repairsAir conditioning & heating diagnostics and repairsWheel end assembly diagnostics and repairsAir system diagnostics and repairsAir brakes diagnostics and repairsCharging system diagnostics and repairsBasic computer diagnostics and auxiliary component replacementParts lookup and acquisition Job Functions: Assist customers with roadside servicesLearn preventative maintenance servicesAbility to move, lift 75+ pounds working in close quarters. Ability to work in various temperatures.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Work a rotating schedule that alternates between day and night as needed.Ability to obtain a medical card through the Department of Transportation. (paid by Love’s) Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer. Veterans encouraged to apply.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

*** $10K sign on bonus for qualified candidates with 3 or more years of experience***Job Title: A&P MechanicLocation: Houston, TXSchedule: Second Shift with possible Overtime (Tuesday-Friday, working 4-10 hr days)Build an Aviation Career You're Proud OfAt StandardAero, we use our ingenuity and know-how to find solutions for the simple to the most complex challenges in aviation. Together, we get the job done and done well. Our stability, resources, and respectful culture supports you in building a solid career with a great team you can count on day in and day out for the long term.The A&P Mechanic is responsible for performing routine maintenance and major inspections on corporate aircraft. Troubleshooting, repair, and modification of aircraft components is accomplished by this position. In addition, engine removal and reinstallation, operational checks, leak checks, and engine runs are all within the responsibility of the A&P Mechanic. Experience with Embraer, Falcon, Lear, Challenger, and Hawker required.Responsibilities:Removes and reinstalls engines from turbofan and turboprop powered aircraft.Responsible for using sound judgment and technical aptitude to make decisions regarding maintenance, sequence, and techniques, troubleshooting and discrepancy resolution.Performs operational checks and engine runs to ensure air-worthiness prior to departure.Inspects aircraft in accordance with OEM Light or Heavy Maintenance ManualsEvaluates removed components for serviceability and documents discrepancies (squawks). Reinstalls and tests components after completed inspection.Troubleshoots and repairs all airframe systems as required (hydraulics, landing gear, etc.).May perform fuel tank sealing on aircraft.Documents all work accomplished (aka sign-off) in a clear, concise and accurate manner.Accomplishes Service Bulletins, Repair Letters, and Airworthiness Directives as required.Reads and interprets maintenance manual procedures, blueprints, technical manuals, and schematic diagrams when required.Responsible for knowing, understanding, following, promoting, and continuously improving company policies and procedures.Analyzes a variety of mechanical problems and determines the cause and best method of repair.Tests operation and repairs/adjusts, as required: engines, engine controls and accessories, propellers and controls, landing gear, hydraulic systems and servicing, and flight controls, and adjusts rigging as required.Checks and repairs fuel, oil, oxygen, heating, cooling and pressurization systems.Utilizes mechanics hand tools, precision measuring instruments, gauges and calibration test equipment.Observes all safety, environmental and general housekeeping rules and policies.May perform other duties as required by the department.Requirements:High School Diploma or GEDA valid FAA Airframe and Powerplant (A&P) License is required.Minimum 2 years corporate aviation experience on Learjet, Hawker, Falcon Jet, Challenger, and EmbraerEligibility Requirements:Must be authorized to work in the U.S.Must have proven mechanical and technical aptitude.Must have proven experience using a variety of hand and/or power tools.Must be able to work with minimal supervision.Strong communication skills required, both verbal and written.Must be available to work second shift, with overtime and weekends as needed.Must be able to work outside in extremes of temperature and inclement weather.Must have the ability to think clearly, speak intelligibly on the telephone and in person.Must have the ability to manipulate equipment of all sizes, tools, computer keyboards, and telephones.Must be able to work in confined spaces.Must be able to stand on hard surfaces for long periods of time.Must be able to see to disassemble and visually inspect.Must be able to hear to detect the sources of problems.Must have excellent hand-to-eye coordination.Must have a history of demonstrating high levels of initiative in completing all job assignments and clearly following directions.Must be able to stand for extended periods of time (8+ hours), lift 50 pounds unassisted, walk, bend, stretch, and climb ladders to service aircraft. Preferred CharacteristicsAviation training preferred. This training may take the form of military training, aeronautical academy or technical school training and/or an Aviation Associates Degree.Factory authorized training on assigned aircraft or engines is preferred.StandardAero Offers:Competitive wagesGenerous paid time offInsurance includes medical, dental and vision benefits401K (immediately vested company match up to 5%)Safety focused cultureQuarterly Bonus structureAdvancement opportunitiesRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero