Odessa, TX 79766 • (27.2 miles) • Full Time • 9/20/2026

Benefits:Competitive salaryPaid time offTraining & developmentResponsibilities: Commission control systems, validate control loops, confirm functionality of control logic, configure end devices Make program changes to PLCs and HMIs Test alarms and ensure the control system is aligned with engineering documentation and red-line documents for As-Built corrections. Gauge production on assigned wells, and report gauge readings, downtime and other pertinent well information to district office Note problems and/or recommend courses of action to supervisor in order to decrease costs and increase production Assist in witnessing meter calibrations; monitor rates and pressures on injection and disposal wells; make necessary adjustments; monitor chemical use; and test safety systems daily to maximize

Odessa, TX 79765 • (26.8 miles) • Full Time • 9/19/2026

Summary:Installs, evaluates, services for fluid ends and power ends on fracturing equipment in home facility or on customer location or customer facility. Competent in speaking with customers concerning equipment and applies knowledge and experience to troubleshooting situations. Inspect, diagnose, repair the pump when it shows up to facility or at customer location. Provide service to customers by answering emergency service calls and technical support if needed.Job Duties/ResponsibilitiesEffectively demonstrate the core values of F-E-T.Follow all written policies and procedures safely without deviation or refer to upper management for guidance.Perform work in a professional and safe manner, report unsafe work practicesMust understand and comply with all company safety rules and regulatio

Midland, TX 79707 • (32.9 miles) • Full Time • 9/19/2026

Description: Valve TesterOverviewThis position performs on-site work in the assembly, maintenance, testing and inspection of manual and/or hydraulic valves utilized in Oil & Gas fracturing operations.Travels to remote client worksites to perform service on equipment.Possesses strong technical skills to troubleshoot and resolve problems without any direct supervision.Essential Duties & ResponsibilitiesUnderstands and follows all HR, HSE and Quality Management Policies.Attends and engages in all OJT led by a Shop Technician II, III or Supervisor, and any other available training that is required to perform job successfully.Responsible for frac stack lubrication that meets manufacturer's specifications before equipment is deployed into production environments.Rebuilds valves Catalogs replacem

Odessa, TX 79763 • (18.5 miles) • Full Time • 9/19/2026

Transco Northwest Inc. has been in business for 50 years supplying material handling systems across a wide spectrum of industrial applications.Our in-depth knowledge of bulk handling systems provides expertise in design & operation and offers competitively priced well-constructed equipment which is tailor-made to meet our customers’ specifications.Job SummaryWe are seeking an experienced Conveyor Belt Mechanic to join our team. The ideal candidate will have hands-on experience with conveyor belt installation, maintenance, troubleshooting, and repair in industrial environments. Strong knowledge of belt vulcanizing, hydraulic systems, and mechanical maintenance is required.Responsibilities:Install, maintain, troubleshoot, and repair conveyor belt systems.Perform hot and cold belt vulcanizing

Odessa, TX • (24.5 miles) • Full Time • 9/19/2026

Critical Infrastructure Mechanical Engineer Location: Onsite – Odessa, TX Reporting to: DCO At STN, we don't just adapt to the digital future, we engineer it. Our mission is to help organizations thrive in a rapidly evolving technology landscape through strategic insight, cutting-edge solutions, and a security-first mindset. We provide end-to-end services spanning cloud consulting, AI infrastructure, and enterprise security, enabling secure, scalable, and future-ready transformation. As trusted advisors, we align IT investments with business outcomes that drive performance and growth, starting with deep strategic engagement and delivering tailored solutions built for long-term impact. Our approach is innovation-led and rooted in cybersecurity, with a focus on leveraging the right technolog

Gardendale, TX 79758 • (25.5 miles) • Full Time • 9/18/2026

Compressor OperatorReinvigorate your career with an organization that values teamwork and is passionate aboutthe work we do and the people who do it!Who we are:At the Crimson Group, we provide our clients with high-value automation, instrumentation, electrical design, and process operation solutions. With the capabilities of a large enterprise, and the agility and responsiveness of a small company, we are a customer-focused provider of automation and integrated solutions. Crimson Group provides total integration of design, project management, panel manufacturing, installation/commissioning, maintenance, and repair for North America and select international markets.What we Offer:Competitive salary, comprehensive benefit package.A laptop and company cell phone or cell phone reimbursement.PPE

Andrews, TX • (30.3 miles) • Full Time • 9/18/2026

Zeeco fosters a robust work environment where employees, from engineering teams to support groups, benefit from a strong culture, trained leadership, and opportunities for growth. Zeeco collaborates with the biggest names in the industry, enabling individuals to broaden their skills alongside teams of subject matter experts. Position Summary:The I/E Flare & Combustion Technician is responsible for the installation, commissioning, troubleshooting, maintenance, and repair of flare systems, thermal oxidizers, enclosed combustors, burner management systems (BMS), instrumentation, controls, and associated electrical equipment. This position provides field service support to customers in refinery, petrochemical, midstream, upstream oil & gas, LNG, power generation, and industrial facilities whi

Midland, TX • (38.4 miles) • Full Time • 9/18/2026

Company Description Turner & Townsend is a global professional services company with over 22,000 people in more than 60 countries.Working with our clients across real estate, infrastructure, energy and natural resources, we transform together delivering outcomes that improve people’s lives. Working in partnership makes it possible to deliver the world’s most impactful projects and programmes as we turn challenge into opportunity and complexity into success.Our capabilities include programme, project, cost, asset and commercial management, controls and performance, procurement and supply chain, net zero and digital solutions.We are majority-owned by CBRE Group, Inc., the world’s largest commercial real estate services and investment firm, with our partners holding a significant minority int

Kermit, TX 79745 • (16.9 miles) • Full Time • 9/18/2026

Summary: Although associates are generally hired to begin in one role, many of our hourly associates perform duties throughout the restaurant. We believe that “cross trained” associates who understand how to perform many roles, lead to higher engagement and greater potential for advancement and promotions. The competencies and basic job description and requirements are listed below, with an in-depth chart showing more specific duties, responsibilities and requirements for each type of role being performed.Competencies:• Strong work ethic and commitment to act with integrity• Excellent communication skills• Team Player, treating others with respect• Commitment to customer satisfaction• Ability to receive coaching and to be accountable for his/her actions• Desire to be empowered to deliver t

Kermit, TX • (20.2 miles) • Full Time • 9/18/2026

Job Title: Compressor OperatorLocation: Carlsbad, NM / Jal, NM / Pecos, TX, and surrounding areas Job Type: Full-time Pay: $30.00 – $40.00 per hour (DOE)Schedule 1: 10/4 Days, 5/2 Days, 5/2 NightsSchedule 2: 10/4 DaysHours: 10 to 12-hour shiftsAbout the Role:We are looking for experienced Compressor Operators to join our field team. This position involves operating, maintaining, and troubleshooting compressor stations. You’ll be responsible for ensuring safe and efficient operation of CAT and Waukesha compressor units and associated equipment.Compressor Operator will have the Knowledge and Ability to Perform the Following:Perform maintenance and repairs on CAT 3516s–3600s and Waukesha compressors.Monitor and operate 10–12 stations with approximately 50 units at each station.Troubleshoot an

Odessa, TX 79762 • (23.5 miles) • Full Time • 9/18/2026

Shop TechnicianStrickland Brothers 10 Minute Oil ChangeJoin a thriving team where your growth is our priority!At our company, your career path is not just a journey; it’s a fast track to success. We’re committed to advancing our employees' careers and recognizing talent at every level.As a Shop Technician, you’ll be part of a fast-paced, team-driven environment where you learn real skills, work with your hands, and see the impact of your work every day. Many of our leaders started right here in entry-level roles and built successful careers through hands-on learning, teamwork, and performance. This is more than a job. It’s a chance to build a career.If you’re ready to elevate your career and make a meaningful impact, we want you on our team!Why Team Strickland:We invest in our team members

Midland, TX 79701 • (39.9 miles) • Full Time • 9/16/2026

Position is IN OFFICE in Midland TX - NOT REMOTE.EXAMPLES OF WORK PERFORMEDTransform survey information, initial sketches, and concept designs using Civil3D into construction plans, generally including:Existing ConditionsDimensioned Site PlanSite Grading & Drainage PlansSite Utility PlansRoadway Plan and Profile DrawingsDetailed Street Intersection DesignsUtility Plan and Profile DrawingsDrainage and Hydraulic Structure Design and Details- Work with engineer to modify plans from mark-ups and design revisions- Coordinate design with Architects and other engineering consultants- Revise plans according to client, manager, or agency reviewer comments and redlines- Self-Review performed work for completeness and accuracy prior to submitting to manager- Work closely with project manager to deter

Odessa, TX 79764 • (16.7 miles) • Full Time • 9/15/2026

Description: TEAM UP WITH US!The Manufacturing CNC Lathe performs both routine and non-routine, moderately complex CNC functions following appropriate procedures for timely and accurate production.DO YOU HAVE WHAT IT TAKES?WHAT YOU'LL DO:Primary duty is to set-up and operate CNC lathes to machine parts to customer requirements.Must be able to work in a high-volume environment.Must be able to read basic blueprints and perform basic job shop mathematical calculations.Familiar with CNC operation and possess a basic understanding of set-ups, tooling, and programming concepts, as well as feeds and speeds.Must be able to follow written instructions and to work with little supervision.Basic understanding of true position tolerance and Cartesian coordinate systems.Cleanliness of the work area and

Odessa, TX 79761 • (24.3 miles) • Full Time • 9/15/2026

Job Description:A Quality Inspector at Butler-Cohen supports commercial and industrial construction projects by assisting with inspections, documentation, and coordination to ensure installed work meets Butler-Cohen standards, project specifications, and industry best practices. This is an ideal role for individuals seeking hands-on experience and opportunity for growth in quality assurance.Essential Duties/Responsibilities:Assist with scheduled inspections to verify/identify compliance with plans, specifications, and safety standards.Collaborate with superintendents and project managers to understand project specifications, goals, and timelines.Assist with quality control, site safety initiatives, and coordination of trade partners as delegated by the project superintendent.Interpret and

Odessa, TX • (24.5 miles) • Full Time • 9/15/2026

Overview We are looking for a skilled and dependable professional to support the installation, maintenance, troubleshooting, and repair of water well pump systems. The ideal candidate takes pride in delivering high-quality service, works well independently and as part of a team, and is committed to safety, customer satisfaction, and reliable system performance.Responsibilities Install, maintain, diagnose, and repair water well pump systems and related equipment.Inspect pumps, motors, tanks, controls, wiring, pressure systems, and associated components for proper operation.Perform troubleshooting to identify mechanical, electrical, and system performance issues.Replace or repair defective parts, including pumps, switches, valves, wiring, and fittings.Conduct system testing to verify pressur

Odessa, TX 79766 • (27.2 miles) • Full Time • 9/15/2026

Lonestar Forklift is a customer-focused material handling equipment dealership with over 30 years of proven success and numerous branch locations across Texas. Lonestar Forklift offers new equipment, used equipment, rentals, service, parts, fleet management, and training for our customers, providing comprehensive and tailored solutions for unique business needs.With a focus on learning and continuous improvement, we are proud to invest in our people and offer a progressive and entrepreneurial work culture where you can develop and advance your career while focusing on meaningful work. Lonestar Forklift is an integral entity of Leavitt Industrial Group.The Opportunity Lonestar Forklift is looking for a mechanically inclined Shop Technician (Forklift Mechanic) to join our Service team in Ode

Midland, TX 79707 • (32.9 miles) • Full Time • 9/15/2026

Job Summary:Reclaim Water Services is seeking a dependable, motivated, and hard-working General Assembly Technician to join our growing operations team at our Odessa production yard. This position plays a key role in supporting the assembly, fabrication, and preparation of water treatment systems used in field operations. The General Assembly Technician will work directly under the guidance of the Production Manager and collaborate with welders, electricians, and other skilled trades to ensure projects are completed efficiently, safely, and to company standards. This is a hands-on role ideal for someone who enjoys physical work, learning new skills, and contributing to a team-oriented environment.Key Responsibilities:Assemble water treatment equipment, skids, piping, and related components

Midland, TX • (38.4 miles) • Full Time • 9/15/2026

ALM Subsurface Production Technologist CLIENT HIGHLIGHT The client you will be working for is a Fortune 100 Oil and Gas Company. This opportunity will give you experience in the energy sector in the United States with a company that is a globally recognized leader in energy production and one of the biggest companies in the US. LOCATION Midland, Texas 79706 COMPENSATION $60–67 per hour Full benefits offered!SCHEDULE Working Model: Onsite, Midland, TX Working Hours: 9/80 schedule (9-hour workdays, alternating Fridays off) CONTRACT TERM 1 year, starting November 2026 POSITION OVERVIEW The ALM Subsurface Production Technologist provides data, analytics, visualization, regulatory reporting and technical workflow support to the New Mexico Asset Lifecycle Management Subsurface team. The role dev

Midland, TX • (38.4 miles) • Full Time • 9/15/2026

TheService Technicianconducts diesel equipment repairs and preventive maintenance requirements; correcting vehicle deficiencies; making adjustments and alignments in the Service Department of a retail dealership environment.HLAs HIGH LEVERAGE ACTIVITIES (focus actions that will return the highest impact):· Determines vehicle condition by conducting inspections and diagnostic test; identifying worn and damaged parts focusing on safety, quality and customer up time.· Corrects vehicle deficiencies by removing, repairing, adjusting, overhauling, assembling, disassembling, and replacing major assemblies, sub-assemblies, components, parts, or systems, such as, power and drive trains, electrical, air conditioning, fuel, emission, brake, steering, hydraulics; completes machine shop operations; mak

Midland, TX • (38.4 miles) • Full Time • 9/15/2026

Stage 3 specializes in high quality solids control equipment designed for mud systems to effectively manage solids, reducing costs for the customer and providing limited or zero discharge solutions as necessary. But we don’t stop there. Additionally, Stage 3 uses a team of Solids Control Field Technicians, field supervisors, engineers and scientists to make intelligent and informed recommendations on how to best manage your job for efficiency and cost savings.This position will work at various drilling rig sites located in New Mexico.While our business has expanded, our mission remains to provide superior service and performance through:Emphasis on SafetyTeamworkTechnology innovationOperational integrityUnder general direction from and reporting to the Field Leader(s), the Solids Control T

Midland, TX 79705 • (43.1 miles) • Full Time • 9/15/2026

Salary: $13- $16 per hour to start TIPSFREE FoodFlexible SchedulePaid Time Off & HolidaysTuition ReimbursementFree UniformsMedical, Dental, Vision for Full Time EmployeesAdvancement Opportunities through our Career Path ProgramPosition Summary:The Back of the House Line Employee performs in the following job set-up positions: vegetable prep, fruit prep, salad bar set-up, front line set-up, back line set-up, meat slicer, catering prep, bread prep, recipe person, project person, and bus/dish set-up. The Back of the House Line Employee performs in the following job positions during the shift: sandwich maker, swing, chip & pickle (expeditor), end person, drink person, back line maker, “to go” expeditor, salad bar re-stocker, food runner, bus person, dishwasher.Job Qualifications:Education: It

Odessa, TX 79763 • (18.5 miles) • Full Time • 9/10/2026

Benefits:401(k)Competitive salaryHealth insurancePaid time off GSS Fabrication Specialist - (Welder) Job Requirements · Two plus years’ experience in fabrication required in pipe fitting, structural welding, and MIG welding.· Experience welding pressure vessels is highly preferred.· Ability to read fabrication drawings and blueprints.· Strong knowledge of welding procedures and fabrication practices.· Familiar with shop tools, and fabrication equipment.· Excellent customer service and communication skills.· Valid drivers license and clean driving record, and reliable transportation to get to work.· Able to work assigned hours and maintain reliable attendance.· Ability to lift to 50 lbs.· Ability to operate cell phone, tablets, and basic computer skills.· Organizational skills – keep tools

Midland, TX • (38.4 miles) • Full Time • 9/10/2026

We are seeking highly skilled and experienced HVAC Sheet Metal Mechanics with a minimum of 5 years of experience in commercial construction. The ideal candidates will be responsible for fabricating, assembling, and installing sheet metal ductwork for HVAC systems in commercial buildings, ensuring high-quality craftsmanship and compliance with industry standards.Key Responsibilities: Fabricate, assemble, install, and secure sheet metal ductwork for HVAC systems in commercial construction projects. Measure, cut, and bend sheet metal to precise specifications based on blueprints and job requirements. Work with various duct materials, including galvanized steel, aluminum, and stainless steel. Ensure proper sealing, insulation, and support of duct systems to meet industry and safety standards.

Midland, TX • (38.4 miles) • Full Time • 9/10/2026

McCorvey Sheet Metal is a Family-owned and operated company seeking Highly qualified skilled commercial Sheet Metal mechanics to join our team! Immediate availability and room for growth. If you have experience with assembling and installing sheet metal duct work, we want to see you! McCorvey Sheet Metal works primarily on larger projects such as hospitals, research labs, sports stadiums, schools and many other vertical markets. Requirements: MUST be able to pass a drug screen, background, and physicalMust have experience working with sheet metal – working on large commercial projectsRead, understand, and analyze blueprints and specificationsLayout hangers utilizing dimensions or with a Trimble unitFull knowledge of ductwork, duct systems, water gauge, and different materials usedHave all

Midland, TX • (38.4 miles) • Full Time • 9/10/2026

HRforGrowth® is engaged as the talent acquisition partner to conduct this search on behalf of a client organization that is hiring for this role. HRforGrowth is not the employer for this position. HRforGrowth identifies, evaluates, and presents top-tier candidates through its global talent acquisition practice; all employment decisions including final selection, offer terms, compensation, and conditions of employment are made solely by the hiring organization. We are actively seeking seasonedOffset Press Operatorto join our dynamic and prosperous team, offering an opportunity for professional growth and fulfillment in delivering top-tier craftsmanship. If you possess the requisite skills and experience outlined below, we invite you to submit your resume for our esteemed consideration. Key

Odessa, TX • (24.5 miles) • Full Time • 9/9/2026

The Autocad Electrical Designer plays a vital role within a cross-functional design team, contributing as an individual contributor responsible for creating detailed electrical schematics and layouts. This position involves regular coordination with engineering teams to support custom solutions, new product development, and product modifications. The successful candidate will utilize AutoCAD Electrical and Autodesk Inventor to ensure designs meet technical and compliance standards.ResponsibilitiesCreate electrical schematics and detailed AutoCAD drafts.Design circuits and arrange component layouts accurately.Prepare and maintain technical documentation.Ensure designs comply with established standards.Support projects through effective coordination with engineering.Required QualificationsEn

Odessa, TX • (24.5 miles) • Full Time • 9/9/2026

Excellent ClientInOdessa, TexasIs Seeking aManuel MachinistJob Duties but not limited to:Operate manual machines, including VTL (Vertical Turning Lathe)Read and interpret blueprints and work instructionsMeasure and inspect parts to ensure accuracyMaintain machines and tools in good working conditionFollow safety and quality standardsRequirements:Minimum of 2 yrs manual machining experienceExperience operating VTL machinesStrong blueprint reading skillsFamiliarity with measuring tools and machining practicesReliable, detail-oriented, and safety focused

Midland, TX 79707 • (32.9 miles) • Full Time • 9/9/2026

A Motorhand provides manual labor as required to operate and maintain the rigs diesel and electric engines. The Motorhand orders tools and replacement parts for these engines and is responsible for testing the machinery for operability and safety and is required to clean and maintain engines at all times. They also operate and maintain the boiler systems. Motorhands are responsible for the training, supervising and assisting of other crew members as required.Actively participates in the promotion of Quality, Health, Safety and Environment policies and ensure safe working practices and conditionsReports immediately any incident or accidentAttends daily safety meetingMaintains an up to date training schedule as per requirementsParticipates in pre-task safety meetings prior to any tasks that

Midland, TX 79705 • (43.1 miles) • Full Time • 9/9/2026

Join Our Team as a Service Technician I at Advenir Azora Living!At Advenir Azora Living, we offer an exciting career in property management where no two days are the same! You’ll make a real impact, guiding people through important life milestones and helping build communities they call home. We prioritize both resident satisfaction and team member growth. Here, your voice matters, and we support career development in a culture focused on strength and growth.What You’ll Do:You'll handle general maintenance, apartment prep, and renovations. You’ll keep residents happy with reliable, friendly service, work on property upkeep, and ensure tasks are completed accurately and efficiently. This role offers growth opportunities to Service Technician II or Assistant Service Manager.What You Bring:Yo

Odessa, TX 79763 • (18.5 miles) • Full Time • 9/8/2026

Company ProfileBlueFin Production Services, a GATE Energy Company, is a leading independent service company with a suite of project execution niches and specialty equipment, covering a full range of pipeline and process, mechanical, intelligent completions, and fluid flushing and filtration services. Our clients range from Operators to General Contractors in the upstream and midstream market sectors of the oil and gas industry. This position is based in Odessa, Texas.Job SummaryServe as Lead Service Technician working in the Completion Services Department for land and offshore. Responsible for execution of tasks as assigned by the Lead Service Technician, Service Supervisor, Project Manager, or other Management. Is operationally qualified, verified, and authorized as required for specific

Odessa, TX 79765 • (26.8 miles) • Full Time • 9/8/2026

Scientific Drilling is looking for a MWD Operator to work in Midland, TX. The MWD Operator will provide quality service related to job preparation and planning. Assist the Senior and Lead MWD Operators in supervision, training, and development of the MWD Operator Trainees. Scientific Drilling is an independent directional drilling and wellbore navigation, surveying and logging Service Company serving customers worldwide. Our industry leading navigation systems provide definitive wellbore placement information, enabling safer and more efficient placement of tightly spaced wellbores throughout the world. We are motivated by crafting innovative and elegant solutions to technically challenging problems.Key Job Functions:Assists and supports Senior and Lead MWD Operators at the well site.Learns

Odessa, TX • (24.5 miles) • Full Time • 9/8/2026

We are currently seeking aMaintenance / Engineerto join our team!Responsibilities:Complete work and repair orders in a timely fashionEstimate time and extent of repairsPerform routine preventive maintenanceMaintain material and supply inventoryOversee work performed by outside contractors as necessaryBe ready and quick with your knowledge and experience to ensure guest safety and comfort, and a safe environment that's critical to fellow associatesGreat team player / assisting with other departmentsBe on top of preventive maintenance to protect every aspect of the property, from hotel rooms and equipment to kitchen and laundryKeep operations running smoothlyRespond swiftly and effectively to every emergency situation that arises during your shift.Help keep the mechanical areas safe, orderly

Midland, TX 79701 • (39.9 miles) • Full Time • 9/8/2026

Pay: From $19.00 per hourJob description:***NO EDUCATION REQUIRED*****MUST BE ABLE TO PASS A BACKGROUND CHECK.**SCHEDULE: DAY SHIFT - 7:45 AM TO 5:00 PM, ROTATIONAL - 14 DAYS ON, 7 DAYS OFF (MONDAY - SUNDAY)LOOKING FOR LOCAL CANDIDATES ONLY.TOP REQUIRED SKILLS:- MUST BE HONEST, RELIABLE, AND DEPENDABLE.- PUNCTUALITY IS VERY IMPORTANT SO WE NEED A PERSON WHO WILL SHOW UP TO WORK ON TIME EVERY DAY.- PREVIOUS OILFIELD EXPERIENCE IS HIGHLY PREFERRED, NOT REQUIRED- PREVIOUS FORKLIFT EXPERIENCE IS NICE TO HAVE.- LOOKING FOR ANALYTICAL THINKERS THAT TAKE INITIATIVE ON DAILY TASKS- SOME COMPUTER PROFICIENCY IS NICE TO HAVE, NOT REQUIREDResponsibilities:- Work closely with customer field representatives to effectively coordinate and execute Cyclops Setting Tool pickup and delivery to customer field

Midland, TX 79707 • (32.9 miles) • Full Time • 9/6/2026

Are you an HVAC Certified Technician looking to join a dynamic team of professionals dedicated to excellence in the industry? As a Full Time Certified Technician at Meek Refrigeration in Midland, Odessa, and surrounding areas, you'll have the opportunity to showcase your problem-solving skills and expertise in HVAC systems. This exciting role allows you to work onsite, providing high-quality service to our valued customers.With a competitive pay rate, you'll be fairly compensated for your hard work and dedication. Join us in delivering top-notch HVAC solutions and be part of a forward-thinking company that values professionalism and customer-centricity. Apply now and take your HVAC career to the next level with Meek Refrigeration!Hello, we're Meek RefrigerationWe are a family centered and

Midland, TX 79706-2624 • (38.4 miles) • Full Time • 9/6/2026

Description: JOB TITLE: Plant TechnicianDEPARTMENT: Plant DepartmentREPORTS TO: Plant ManagerSUMMARY: The Plant Technician is responsible for operating and maintaining regeneration facilities (PE, DI, Bottled Water) and plant to ensure an adequate supply of quality products are available for customers. Plant and or Parts Laborers require skill, efficiency, and physical ability. This is a specialized job wherein employees require executing their dedication and proficiency in completing delegated task and handling Culligan equipment and parts.BENEFITSConsistent Work hoursPaid HolidaysPaid Time OffMedical, Dental, & Vision InsuranceSupplemental InsuranceCompany Provided Life Insurance & Long-term Disability401K retirement with Company MatchCompany Picnics and Holiday PartiesCompany DiscountsN

Odessa, TX 79761 • (24.3 miles) • Full Time • 9/6/2026

Planning TechnicianDepartment: Planning Reports to: Director of DevelopmentSummary: Under basic supervision, provides technical planning support for the Planning Department (PSD) staff; reviews building plans to verify compliance with City standards and state and federal regulations.Essential Functions: -- Essential duties and responsibilities may include, but are not limited to, the following:Performs a variety of basic technical plan review services, reviews standard building plans and permit applications for compliance with state and federal regulations, and City and county codes, policies, and procedures.Creates and updates planning case files and computer records; develops Geographic Information System (GIS) maps for case files and zone updates.Provides customer services; responds to

Odessa, TX 79764 • (16.7 miles) • Full Time • 9/6/2026

Benefits:401(k)Health insuranceJob Summary We are seeking a Manual Machinist to join our team! As a Machinist, you will be working with a variety of machines (such as lathes, mills, presses, etc.) and manufacturing equipment as needed and per blueprint or job order specifications. You will also be repairing and maintaining your equipment as needed, assisting other machinists with larger tasks, and maintaining a safe work environment. The ideal candidate has exceptional attention to detail, previous experience in a manufacturing environment, and the ability to work well with minimal supervision. ResponsibilitiesRead blueprints or job orders and make adjustments to equipment as needed, often with precision toolsCheck final products for accuracy, and make adjustments to machines as needed to

Midland, TX 79711 • (40.1 miles) • Full Time • 9/6/2026

We are looking for an experienced Production Manager to lead workshop operations in Big Spring, Texas and ensure repair activities move forward safely, efficiently, and on schedule. This role partners closely with supervisors, planning, commercial operations, and technical teams to align labor, materials, and equipment with production needs. The ideal candidate will combine strong operational leadership with cost awareness, supplier management, and a commitment to quality standards. Responsibilities: • Direct daily workshop activities to keep repair and maintenance work progressing on time while making effective use of staffing, equipment, and logistics resources. • Coordinate with technical leadership and planning teams to confirm that labor, parts, tooling, and materials are ready before

Midland, TX • (38.4 miles) • Full Time • 9/5/2026

DescriptionAutomation Specialist: Focus on Programmable Logic Controllers (Various Models)Location: North DakotaThe applicant must demonstrate the following qualifications:1) The applicant must have comprehensive and functional knowledge regarding principles of automation programming, measurement programming, and instrumentation configuration.2) The applicant must specialize in either automation, measurement, or communications applications and retain relevant certifications or work experience qualifications.3) The applicant shall function independently and leverage their existing knowledge and skillset to overcome challenges in a dynamic workplace environment.4) The applicant shall represent the company (Colexas Digital, Inc.) to its clientele in a manner that is respectable and profession

Kermit, TX 79745 • (16.9 miles) • Full Time • 9/5/2026

Natural Gas Compressor Mechanic-Delaware Basin West Texas and SE New Mexico-Kermit, Monahans, Pecos, Jal, Eunice, Carlsbad AreasJob descriptionThis position requires the mechanic to operate, troubleshoot, and repair oilfield compression units that compress natural gas or recover vapors associated with the movement and/or storage of oil and natural gas. These units are at remote locations and facilities.The ideal candidate will have a strong mechanical knowledge, excellent problem-solving skills, and the ability to work well under pressure.Daily repair, maintenance, troubleshooting, preventive maintenance, emissions testing, and start-up of natural gas compressors at company locations duringscheduled and unscheduled equipment repairs and maintenanceEngine, mechanical, and technical experien

Odessa, TX 79764 • (16.7 miles) • Full Time • 9/4/2026

PLC/ HMI Programmer- Carlsbad/Hobbs work areaLone Star Corporation has an opening for a PLC / HMI Programmer to expand our efforts in the fast paced, and growing oil and gas market in the Permian Basin of West Texas and South-East New Mexico. The candidate will be responsible for programming automation and controls systems involving PLC's, HMI's and RTU's in an oil and gas field or plant setting, as well as interfacing and communicating with customers on project work. Candidate would work with customers to identify desired automation and controls functionality and then deliver such programming. This would include designing, planning, managing, installing, performing start-up, commissioning and related documentation of such automation and control systems. Other duties may include instrument