Three Rivers, TX 78071 • (41.7 miles) • Full Time • 9/22/2026

Description: Job Overview:The Plant Operator is essential to maintaining the efficiency and safety of production operations. Responsibilities include handling and monitoring chemicals and accurately recording data. The role also involves troubleshooting equipment issues, adhering to safety and quality regulations, and working collaboratively with team members to enhance production efficiency. The position demands physical endurance and a commitment to safety, with the need to work flexible shifts, including nights and peak seasons.Duties/Responsibilities:Load and unload railcars, trucks, and tankers applicable to the plant's operations.Store, retrieve, mix, and monitor chemicals used in production processes.Accurately record information such as ingredients, weights, and temperatures, and i

Kenedy, TX • (22.4 miles) • Full Time • 9/22/2026

McCarty Equipment, a SunSource company, is a highly recognized value-added distributer and fabricator of hose. With 17 locations across North America, we provide a wide range of hose, valves, gaskets, fittings and tools. We have the capability to provide support for all your industrial and MRO needs with a vast array of tools, hand tools, fasteners, consumables, and a factory authorized tool repair facility. Check us out! www.mccartyequipment.comAssist in any area of the shop to include the gasket, hose, mechanical seal, cylinder repair and/or conveyor belting departments. Uses various tools to measure, manipulate and cut gaskets and fabricate hoses and other related products. Assist in general shop duties. Works under close supervision.Essential Functions: Participate in counting invento

Karnes City, TX 78118 • (15.8 miles) • Full Time • 9/20/2026

Island Operating is seeking an experienced I&E / Gas Management Foreman to support land-based oil and gas production operations in Karnes County, Texas. Qualified candidates must have a strong hands-on background in I&E, controls, and gas measurement within land-based oil and gas production facilities. Responsibilities & ExperienceTroubleshoot and maintain instrumentation, electrical systems, controls, and field devicesWork with pressure, level, and flow instrumentation, transmitters, control valves, and switchesTroubleshoot PLC/control systems, electrical circuits, motors, and VFDsPerform calibrations, preventative maintenance, and corrective repairsOversee and coordinate gas measurement and meter-related activitiesCoordinate and perform 3rd-party meter proofing and review/complete proofi

Kenedy, TX 78119 • (26.6 miles) • Full Time • 9/2/2026

Pay: Starting at $24.00 per hour (Based on Experience)Job DescriptionJob Title: I&E Technician Apprentice / Electrical ApprenticeLocation:Kenedy, TX | Eagle Ford ShaleSchedule: 5/2 (Monday-Friday, weekends and holidays as needed)Employment Type: Full-TimeJob Summary MRI Automation is seeking a motivated I&E Technician Apprentice / Electrical Apprentice to assist with the installation, maintenance, calibration, and troubleshooting of electrical and instrumentation systems in oil and gas production facilities.This position is ideal for individuals who are eager to learn industrial electrical and instrumentation technologies while gaining hands-on field experience under the guidance of experienced technicians. The successful candidate will have a strong work ethic, a willingness to learn, an

San Antonio, TX • (38.2 miles) • Full Time • 9/1/2026

Home Care Scheduling and Office CoordinatorCardinal Senior Care | San Antonio, TXFull-Time | In-PersonJoin Our Growing Home Care TeamCardinal Senior Care is looking for a strong and experienced Office Coordinator with Home Care industry experience to help manage and coordinate our busy office operations.This is not an entry-level administrative position. We need someone who understands the fast-paced nature of home care and can confidently handle scheduling, caregiver coordination, recruiting, and daily office responsibilities.You must be:Highly organized and dependableWilling to take ownership and accountability, even in challenging situationsAble to work independently with minimal supervisionStrong in communication and follow-upComfortable using scheduling and office softwareDynamic indi

San Antonio, TX • (38.2 miles) • Full Time • 9/25/2026

Level 2Service Technician - North Park Lexus San AntonioWe currently have an opportunity available for a Level w Service Technician. If you are looking for a professional, fun, competitive & fast paced environment with above average earning potential & benefits then keep reading! Qualified candidates possess the ability to perform their work efficiently, accurately and in accordance with dealership and factory standards.Essential Dutiesinclude the following. Other duties and responsibilities may be assigned.Performs oil changes on guest vehicles.Performs a thorough checkof guests vehicles, refers needed repairs and preventive maintenance to ASM.Inspects oil, cabin, air filters and vehicle fluid levels and replaces or replenishes as necessary.Checks tire pressures and adds air, as needed.Do

San Antonio, TX 78284 • (38.2 miles) • Full Time • 9/25/2026

Come Join Our Team in this Innovative and Growing Field.About Us:We are a professional, innovative, customer-centric company that specializes in ADAS Safety Calibrations and Glass Replacement, ensuring the proper operation of vehicle safety systems. Safety is our number 1 priority!Our work environment includes:Growth opportunities.On-the-job training.Lively atmosphere.Duties:Develop and maintain excellent customer relationships through our company culture and values.Be customer service-focused and develop relationships with operational consistency.Explain ADAS calibration specifications and repairs to collision customers including repair staff and insurance adjustersPerform static and dynamic ADAS Calibrations, including pre/post scans.Troubleshoot complex calibration repairs.Basic knowled

San Antonio, TX 78217 • (38.3 miles) • Full Time • 9/25/2026

Description: Company SummaryUnify Energy Solutions is a leading provider of innovative Building Automation Solutions (BAS) that maximize energy efficiency and sustainable building operations. Our solutions control and monitor building functions such as heating, air conditioning, and lighting in the education, commercial office, healthcare, government, and data center markets. If you're dedicated and ambitious, Unify Energy Solutions is an excellent place to grow your career.Job SummaryAre you a Commercial HVAC Technician with a talent for troubleshooting and a hunger for the "tech" side of the industry? Do you excel with chillers, RTUs, and air handlers, but feel ready to master the world of Building Automation Systems (BAS)?Unify Energy Solutions is seeking an early-to-mid-career, motivat

San Antonio, TX 78228 • (39.9 miles) • Full Time • 9/25/2026

Job Posting: CAD/CAM Milling Department ManagerJob Description Authentic Dental Lab, a respected leader in the dental prosthesis manufacturing industry based in San Antonio, TX, is excited to announce a new opening for a full-time CAD/CAM Milling Department Manager. This key position is integral to our operations and requires a dedicated professional eager to contribute to our longstanding tradition of excellence. This role is on-site and is not eligible for remote work. As the manager of the CAD/CAM milling department, you will oversee the efficient and precise production of dental restorations, ensuring each piece meets our high-quality standards.The successful candidate will lead a team of skilled technicians, driving process improvements and technological integrations that enhance our

Elmendorf, TX 78112 • (20.1 miles) • Full Time • 9/25/2026

OverviewCoolSys solves the most complex challenges in refrigeration, air conditioning, heating, engineering, and energy management.With over 3,700 associates nationwide, we deliver tailored solutions to help businesses cut costs, improve equipment performance, and reduce emissions.Our services include HVAC and refrigeration equipment sourcing, installation, repair, maintenance, monitoring, and optimization. We also offer engineering design, energy resilience and consumption optimization, asset recycling, and seamless multi-site rollouts across states.CoolSys serves over 45,000 customer locations in industries like retail, food service, commercial, data centers, industrial, and pharmaceuticals.No wonder Newsweek named CoolSys one of America’s Greatest Workplaces!We understand that hiring gr

Adkins, TX 78101 • (20.9 miles) • Full Time • 9/25/2026

Quality Control Inspector - Metal Fabrication (Bilingual English/Spanish) Location: Adkins, TX 78101Job Type: Full-Time | On-SiteSchedule: Monday - Thursday | 7:00 AM - 5:45 PM (45-minute lunch)Pay: $27.00 per hourReports to: Production Supervisor / Operations Manager About Top Metal Solutions Top Metal Solutions is a growing metal fabrication company specializing in structural steel, custom metal fabrication, welding, CNC cutting, forming, industrial coating, and custom manufacturing solutions. We are committed to delivering high-quality products through precision, craftsmanship, and continuous improvement.We are seeking a detail-oriented and dependable Quality Control Inspector to join our team and help ensure every product leaving our facility meets customer specifications and company q

San Antonio, TX 78264 • (27.1 miles) • Full Time • 9/25/2026

Job SummaryThis position is accountable for operating equipment that mixes and grinds liquids and other materials used to manufacture automotive paint. This position directly impacts the quality and quantity of product produced.ResponsibilitiesResponsible for daily paint process start-up.Night Shift Position.Verifies part quality, and confirm raw material and equipment are in proper condition to begin production per-standardComplete color changes in timely manner and all items confirmed after handing over booth to production team memberComplete start-up card and check sheets to ensure good qualityHandles all paint straining and filling in paint kitchensEnsures good 5s/2s levels in assigned paint kitchen and setup areaMix paint to be used on the lines.Maintain paint material and monitor che

San Antonio, TX 78235 • (28.5 miles) • Full Time • 9/25/2026

Description: About our companyBakerly, a happy family-owned company, is proud to be home to one of the fastest-growing brands in the US food industry! We are a baked goods manufacturer that emphasizes delicious, premium, and authentic recipes using only the very best ingredients. Our offices located in Miami, FL, Easton, PA, and San Antonio, TX, will make you feel right at home. Please visit our website to learn more about our delicious French crpes, golden croissants, fluffy pancakes, and our large range of outstanding French brioches.The Maintenance Technician, Instruments and Controls is responsible for the installation, maintenance, optimization, and repair of automation and controls systems at Bakerly Ranch. Additionally, they are responsible for troubleshooting PLCs and component par

Seguin, TX 78155 • (33 miles) • Full Time • 9/25/2026

ABOUT THE ROLEProduction employees build the industry leading homes and components for each of our unique Cavco brands. Production employees follow specified engineering and safety processes that maximize the efficient manufacturing and construction of high-quality products for our customers.The Production Manager is the most senior leader responsible only for plant production. He/she retains complete accountability for execution and continuous improvement of production across a plant and the various production departments in order to meet specific client quality and production goals. He/she is accountable for production process mapping, documenting, reengineering, quality assurance, staffing, metrics, controls, risk identification, service level expectations and overseeing the training of

San Antonio, TX 78204 • (34.2 miles) • Full Time • 9/25/2026

Description: Job PurposeThe Electrical Engineer will have overall responsibilities for the electrical design on a project. The position will collaborate and direct other electrical staff during the design and documentation of the electrical system. The position will coordinate the electrical design with all other disciplines so that the design is completely coordinated internally as well as with external clients.Duties and ResponsibilitiesThe primary duties and responsibilities of this position include the following:Prepare design documents appropriate for the project and in accordance with company standards.Monitor project status and development to meet project deadlinesCoordinate the completion of the documents in the appropriate time to have a QA/QC review completed prior to the deadlin

San Antonio, TX 78428 • (38.2 miles) • Full Time • 9/25/2026

Job SummaryWe are seeking aCleaning Technician with strong experience in large industrial environments and data centers. This role focuses onspecialized industrial cleaning, operating equipment, and maintaininghighly controlled and sensitive environments.ResponsibilitiesPerform specialized cleaning inlarge industrial facilities and data centersClean and maintaincritical areasfollowing data center standardsOperateindustrial cleaning machinery and toolsFollowstrict SOPs, safety protocols, and contamination-control proceduresEnsure compliance withdata center cleanliness and security requirementsConduct detailed cleaning in electrical rooms, equipment areas, and controlled spacesDocument completed tasks as requiredRequirementsProven experience as aCleaning Technician in large industrial facili

New Braunfels, TX 78130 • (42.8 miles) • Full Time • 9/25/2026

Company Description Since its spin-off in September 2025 AUMOVIO continues the business of the former Continental group sector Automotive as an independent company. The technology and electronics company offers a wide-ranging portfolio that makes mobility safe, exciting, connected, and autonomous. This includes sensor solutions, displays, braking and comfort systems as well as comprehensive expertise in software, architecture platforms, and assistance systems for software-defined vehicles. In the fiscal year 2024 the business areas, which now belong to AUMOVIO, generated sales of 19.6 billion Euro. The company is headquartered in Frankfurt, Germany and has about 87.000 employees in more than 100 locations worldwide.Job Description The Automation Controls Engineer provides hands-on technica

San Antonio, TX 78216 • (40.4 miles) • Full Time • 9/25/2026

Job SummaryThe FUELS - Quality Control Manager position is responsible for planning, designing, implementing, and managing quality control and quality assurance processes, procedures, documentation associated with deliverable preparation tracking, and reviews for construction, fuels, environmental remediation, and demolition.Bristol Alliance of Companies (Bristol) is committed to building lasting relationships that reflect our hard work, ingenuity, and dedication to safety. Every employee has an impact on our success, which benefits the Native Culture, land, and people of the Bristol Bay region.Our values: People, Communities, Reputation, Teamwork, Trust, and Truth.This is a Hybrid position that has a 90 percent travel requirement.Essential FunctionsPrepare cost estimates and proposals, al

Stockdale, TX • (13.3 miles) • Full Time • 9/25/2026

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better.Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, Mxico y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fbricas funcionen mejor. Principal Duties/Responsibilities:· Performs expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to location root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing o

Von Ormy, TX 78073 • (34.7 miles) • Full Time • 9/25/2026

Job descriptionProduction Worker Job DescriptionWe are looking for Production Line Worker to assist in the manufacturing process at our facility. You will be working in a fast-paced environment that packages swimming pool chemicals. The Production Worker's responsibilities may include sorting cases, pulling bottles, capping, and uncapping bottles, inspecting cases, packaging bottles, stacking, and operating the filling machine. An outstanding Production Worker should be able to maintain production standards and work towards improving productivity without compromising quality.Production Worker Responsibilities:Following health and safety standards.Maintaining a clean workstation and production floor.Packing filled bottles of consumer commodities in boxes or packages as directed by superviso

San Antonio, TX 78242 • (37.1 miles) • Full Time • 9/25/2026

ICC Special Inspector / Construction Materials Testing TechnicianLocation: Greater San Antonio Area, TXJob type: Full-timePay: $28–$40 per hour, based on experience and certificationsSign-on bonus: Up to $5,000 for qualified candidatesOvertime: Available based on project needsB2Z Engineering is hiring an experienced ICC Special Inspector / Construction Materials Testing (CMT) Technician to support projects throughout the Greater San Antonio area. This role is a good fit for someone who can work independently in the field, produce accurate reports, and communicate professionally with contractors, engineers, and clients.Candidates with both ICC Soils Special Inspector and ICC Reinforced Concrete Special Inspector certifications will receive strong preference. ACI Concrete Field Testing Techn

San Antonio, TX 78242 • (37.1 miles) • Full Time • 9/25/2026

Looking for a Mechanical Field Technician to work on-site at customer location. Technicians will be dedicated to one customer and will not be expected to travel as part of their job.Position Purpose: Provide hands-on technical support to our customer in order to fulfill their requirements. Primary responsibility is to provide general maintenance and/or repairs on various mechanical equipment. All work will be done on-site, at one customer location, so this is a customer facing role.Responsibilities:* Using basic hand tools, perform on-site repairs, maintenance, and general service tasks and conduct product demonstrations of basic mechanical equipment. When necessary, provide maintenance support and training to in-house maintenance staff.* Provide technical guidance and expertise where appl

San Antonio, TX • (38.2 miles) • Full Time • 9/25/2026

Schedule: Monday–Friday, 7:30 AM–4:00 PM + overtime as neededType: Full-Time | Direct HireWe are seeking an experienced Industrial Equipment Mechanic to diagnose, rebuild, repair, and maintain gearboxes and heavy industrial equipment in a machine-shop environment.What You'll Do Diagnose and repair industrial machinery and gearboxesDisassemble, inspect, rebuild, and reassemble mechanical equipmentPerform welding and fabrication for equipment repairsWork with mechanical assemblies and heavy machineryInspect components for wear, damage, and proper operationUse shop and fabrication equipment safelyRequirements 5+ years of industrial mechanical repair and/or heavy industrial welding experienceStrong mechanical troubleshooting and equipment-rebuilding skillsWelding and fabrication experienceExpe

San Antonio, TX • (38.2 miles) • Full Time • 9/25/2026

SummaryCustomer Quality Specialist serves as the primary quality interface between Boeing and GTI for assigned programs. This role owns the coordination and resolution of Boeing NCRs, corrective actions, and quality deliverables, exercising independent judgment to evaluate issues, establish priorities, coordinate cross-functional resources, and drive timely resolution. The role requires strong knowledge of root cause analysis, corrective action methodologies, and aerospace quality requirements, with the ability to assess technical issues and determine appropriate courses of action.Essential Duties and ResponsibilitiesServes as the primary Quality point of contact between Boeing and GTI for assigned programs, coordinating client quality issues, requirements, deliverables and communications.

San Antonio, TX 78218 • (34.9 miles) • Full Time • 9/24/2026

About the Role:Join WKC GLASS LLC as a Glass Fabricator and become an integral part of our dedicated team in San Antonio, TX! In this exciting role, you will work with high-quality glass products, ensuring precision and craftsmanship in every piece.Responsibilities:Cut, shape, and polish glass according to specifications and project requirements.Operate glass fabrication machinery with a focus on safety and quality.Inspect finished products for defects and ensure adherence to quality standards.Collaborate with team members to meet production schedules and deadlines.Maintain a clean and organized workspace to promote safety and efficiency.Assist in troubleshooting and resolving production issues as they arise.Follow all company policies and procedures related to glass fabrication.Requiremen

San Antonio, TX • (38.2 miles) • Full Time • 9/24/2026

American Air Conditioning & Heating is looking for experienced Commercial Sheet Metal Mechanics / HVAC Duct Installers to join our commercial HVAC team.We have multiple active projects throughout the San Antonio and Austin areas and are looking for dependable installers who know the trade, have their own basic tools, and can work without constant supervision.This is not an entry-level position. We need people who understand commercial HVAC duct installation and can look at a set of plans, understand what needs to be installed, and get the work completed correctly.ResponsibilitiesInstall commercial HVAC ductwork including rectangular, spiral, round, flex duct, diffusers, grilles, and related accessories.Read and understand mechanical plans and duct layouts.Properly hang, support, seal, and

San Antonio, TX 78222 • (27.4 miles) • Full Time • 9/24/2026

About the Role:We are seeking a highly skilled Metal Man to join our team. As a Metal Man, you will be responsible for fabricating and repairing metal structures and equipment using various welding techniques. You will work with a variety of metals, including steel, aluminum, and copper, and will be expected to read and interpret technical drawings and blueprints. Your work will be critical to ensuring the safety and functionality of our equipment and structures.Minimum Qualifications:High school diploma or equivalentCompletion of a welding program or apprenticeshipExperience with MIG, TIG, and stick welding techniquesAbility to read and interpret technical drawings and blueprintsStrong attention to detail and commitment to safetyPreferred Qualifications:Certification in weldingExperience

San Antonio, TX 78244 • (32.3 miles) • Full Time • 9/24/2026

Since 1985, Coilplus has dedicated itself to becoming one of the most trusted names in flat rolled Carbon steel, Stainless Steel and Aluminum processing in North America. Our customers expect nothing less than excellence and we enjoy keeping our customers satisfied and loyal. From the administrative staff through the company ownership, everyone who is a part of our Coilplus family understands that four strategic principles; Reliability, People, Quality, & Resilience, are what make our story a successful and prosperous one. The Recoiler/Exit assists operators with the operation of Slitter equipment to produce material to customer specifications. The primary responsibility is to assist the operator wherever needed, inspect material and discharge product as required.Job Duties/Responsibilitie

San Antonio, TX 78226 • (36.5 miles) • Full Time • 9/24/2026

Description: Join Knight Aerospace as a Master SchedulerHelp connect engineering, production, and program teams to keep complex aerospace projects moving forward.We offer affordable medical coverage; employer-paid dental, vision, and life insurance; and a 401(k) with company match.You’ll also be eligible for a target annual bonus of 5% of your annual salary, subject to the bonus program’s terms.Our benefits include 110 hours of PTO annually, with increases to 150 hours after five years of service and 190 hours after ten years.Benefits become effective on the first day of the month following your hire date. Optional enhanced dental, STD, LTD, and Aflac plans are also available.Position Summary:The Master Scheduler is a highly experienced professional responsible for creating high-level port

San Antonio, TX • (38.2 miles) • Full Time • 9/24/2026

As a Mechanical Engineer Designer at Automated Cleaning Technologies, you will leverage your expertise in CAD modeling and machinery design to create detailed and precise components and systems for advanced machine solutions. Working primarily with SolidWorks and SolidWorks PDM, you will ensure designs are manufacturable, compliant, and delivered on schedule. Collaborating closely with engineering, production, and electrical teams, you will contribute to innovative machinery used across aerospace, manufacturing, military, and energy sectors, all built in our San Antonio facilities.ResponsibilitiesDevelop and maintain detailed CAD models and technical drawings for machinery designs using SolidWorks.Attend Sales Order release meetings and manage assigned projects independently or collaborati

New Braunfels, TX • (43.4 miles) • Full Time • 9/24/2026

DescriptionWe are CURRENTLY seeking phenomenal Production Operators to join our team!Starting Pay for this Role is $17.50 per hour with opportunities to increase to $19 over 12 months. Many promotion opportunities will exist as facility grows.Training is provided for this role.Work Hours:1st Shift - Monday - Friday - 7 AM - 3:30 PM2nd Shift - Monday - Friday - 3 PM - 11:30 PMKey ResponsibilitiesWhat does a typical day look like? I'm glad you asked!Safe operation of the production equipment in various production positions as assigned by the Supervisor.Reports to his Supervisor and proactively involves himself in identifying the defects in the manufacturing of the product and efficiently eliminates the root cause.Production Operators assist with set up, product and process equipment changeov

New Braunfels, TX • (43.4 miles) • Full Time • 9/24/2026

Build What You DrawAre you an AutoCAD Detailer or CAD Draftsperson who enjoys seeing your work go from a computer screen to an actual construction project?We’re looking for a CAD Draftsperson to join our team and create detailed 2D drawings for metal building and construction projects. You’ll play an important role in taking project concepts, architectural plans, and specifications and turning them into accurate drawings that support fabrication, permitting, and field installation.This is a great opportunity for someone with AutoCAD experience who wants to expand their knowledge of construction detailing, light-gauge steel, and structural systems while working alongside experienced shop, engineering, and field teams.What You’ll DoReview project scopes, customer drawings, and specifications

New Braunfels, TX • (43.4 miles) • Full Time • 9/24/2026

Are you passionate about making a meaningful impact in the lives of families and their beloved pets? Heavenly Paws in New Braunfels, TX, is hiring a Memorial Services Technician to help us honor pets with dignity and compassion.In this role, you’ll be an essential part of our care and memorial process, helping to create high-quality keepsakes that families will treasure forever. We’re looking for someone detail-oriented, reliable, and committed to treating each pet’s memory with the utmost respect.What We Offer:Competitive pay: $16–$20/hourA mission-driven work environmentThe opportunity to bring comfort to families during difficult timesYour Impact:Every package that leaves our facility tells a story. As a Memorial Services Technician, your work directly supports our promise to provide a

San Antonio, TX 78222 • (27.4 miles) • Full Time • 9/24/2026

DescriptionThe Crane Shop Service Technician performs inspections, diagnoses, and repairs of diesel-powered heavy equipment and/or related equipment or components, following established procedures and guidelines. Works independently or as a member of a team to provide basic mechanical services that satisfies customer needs and achieves departmental goals.Mid-level position – Generally has more than seven years of experience and/or demonstrated job relevant knowledge/skills. A Level IV Technician has a broad knowledge of the field’s standard and technical concepts, practices, and procedures. Relies on extensive experience and judgment to plan and accomplish goals. Performs a variety of standard, complex, and technical tasks; is self-starting and requires minimal supervision; is often a team

San Antonio, TX 78219 • (31.4 miles) • Full Time • 9/24/2026

We are hiring immediately for a full time SERVICE TECHNICIAN position.Location: Canteen - 3410 Steen Street, San Antonio, TX 78219. Note: online applications accepted only.Schedule: Full time schedule. Monday through Friday; hours may vary. Further details upon interview.Requirement: Previous OCS coffee repairs, coffee technician, and vending technician experience preferred.Pay Range: $20.00per hour to$25.00per hour.*Internal Employee Referral Bonus AvailableThe advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions:http://olivia.paradox.ai/moSkgAbout Canteen: Canteen brings break time to everyone. We combine food, ser

San Antonio, TX 78226 • (36.5 miles) • Full Time • 9/24/2026

This is an in person role at our San Antonio, TX based Headquarters.Plus One Robotics is a dynamic startup developing cutting-edge robotic solutions for logistics and e-commerce applications. We aim to revolutionize automation with high-performance systems that integrate hardware and software seamlessly.Role OverviewAs a Sr. Controls Engineer, you will be responsible for the design and development of robotic controls and electronics for our InductOne and related systems. You will also be responsible for programming PLCs and configuring controls (drivers, sensors, etc.) to meet performance and quality requirements. You will drive technical architecture by collaborating with mechanical and software engineers.Key Responsibilities:Technical Execution & Product DevelopmentSupport the implementa

San Antonio, TX • (38.2 miles) • Full Time • 9/24/2026

The Food Production Assembly Worker is responsible for assembling, packaging, labeling, and preparing food products in accordance with company quality, food safety, and production standards. This position requires working efficiently in a fast-paced production environment while maintaining cleanliness, accuracy, and compliance with all food safety regulations.Essential Duties and ResponsibilitiesAssemble food products according to production specifications and work instructions.Package finished products into containers, boxes, or cases for shipment.Label products accurately according to customer and regulatory requirements.Inspect products for quality, appearance, and proper packaging.Follow Good Manufacturing Practices (GMPs), HACCP procedures, and all food safety requirements.Maintain a

San Antonio, TX 78216 • (40.4 miles) • Full Time • 9/24/2026

Great work starts with great people. At Flintco, you’ll find respect, stability, and opportunity to grow your career. Established in 1908, Flintco maintains offices in 8 major cities and employs more than 900 talented and humble professionals. Ranked among the largest and safest contractors in the nation, we deliver projects across a wide range of market sectors, including healthcare, education, hospitality, sports, mixed-use/residential, advanced industries, and renewable energy. With self-perform capabilities in concrete, steel fabrication and erection, site work, and other critical services, we bring a distinct in-house advantage to every project. Guided by the core principles of our Ethos Safety, Quality, Honesty, Integrity, and Innovation our culture is rooted in accountability, colla

Seguin, TX 78155 • (33 miles) • Full Time • 9/23/2026

This role is responsible for executing the fabrication plans and supporting the daily operations and manufacturing tasks/projects for the entire facility.ESSENTIAL DUTIES AND RESPONSIBILITIES include the following, but are not limited to:Follows Safety Guideline and procedures set for this role.Does not operate any equipment, machinery, or tools if he/she has not been trained to operate.Creates and builds metal structures and components according to design specificationsExamines project requirements to determine materials and dimensions needed to complete the job or task.Assesses and mitigates potential challenges in the fabrication processConducts precise measurements and cutting materials to specified sizesEnsures adherence to quality standards and project specificationsInterprets techni

Marion, TX 78124 • (33.8 miles) • Full Time • 9/23/2026

Volumetric Concrete Truck Plant ManagerAR Mobile Concrete LLC/AR Utilities & Excavation LLC Marion, TexasPosition Summary:AR Mobile Concrete LLC is seeking an experienced and motivated Volumetric Concrete Truck Plant Manager to oversee daily operations of our mobile concrete production fleet. This position is responsible for managing volumetric concrete truck operations, quality control, maintenance coordination, driver supervision, and production efficiency.Eventually this position will grow to include, sales and scheduling/dispatchThe ideal candidate has experience in ready-mix concrete, volumetric concrete operations, construction materials, fleet management, or related heavy equipment industries.Key Responsibilities:Manage daily operations of volumetric concrete trucks.Coordinate deliv

San Antonio, TX 78215 • (35 miles) • Full Time • 9/23/2026

Job Posting:Assistant ManagerExperience The EMBREY Way by joining our dynamic Property Management team as an Assistant Manager at the Can Plant.As anAssistant Manager, you will assist in resident retention while enhancing the resident experience by applying skillful conflict resolution strategies. ResponsibilitiesPost rent payments daily and manage delinquent accounts.Audit lease and resident files.Process pre-close and month-end reports.Inspect apartments upon move-ins and move-outs.Generate new lease and renewal contracts.Complete statement of deposits for move-outs.QualificationsOne year of sales/service industry experiencePrevious leasing experience, preferredExperience utilizing Yardi and Microsoft Office SuiteHigh school diploma or equivalent, preferredValid Driver’s LicenseRequired