Pay starts at $18.00 an hour and goes up depending on experience.
Our ideal candidate should have previous experience as a mechanic/technician in the trailer industry. Carpentry, welding and mechanic skills are a plus. We are looking for a self-motivated person with strong work ethics. We are willing to train the right applicant.
Duties will include: Read and understand the jobs and work order per company standards Preventative maintenance and repair all systems on Semi-Trailers to meet the standards set forth by DOT Remove and replace brakes, brake drums, hubs, seals, bearings, races and associated parts Repair electrical and lighting systems Repair or replace chassis components such as springs, spring hangers, equalizers, complete slider assemblies, axles, and sub frames Repair mud flap brackets and dolly leg assembles Repair or replace flooring, rub rails, doors and door trim Repair roofs, panels, nose panels, lower and upper rails Conform to all safety and health standards Assist fellow mechanic technicians
Benefits: Paid time off Paid holidays 401 Medical, Dental, Vision Life Insurance Long and Short Term Disability
Requirements: 1 - 3 years of experience in trailer repair or equivalent experience with welding, carpentry, and mechanic skills Valid driver’s license with a safe driving record. Must furnish own basic hand tools. Ability to stand, walk, bend, crouch, stoop, reach, stretch, step, climb, and / or sit frequently and lift heavy (up to 60lb) throughout the duration of the day Ability to work independently with minimal supervision Attention to detail and highly organized

RoadSafe is looking for Flaggers to join our team!
Hiring Flaggers that have a valid driver's license. Starting pay is $15 per hour.
Work with the Traffic Control Department at work sites to direct motorists by flagging them away from worker activities, moving equipment, oncoming traffic and perform duties listed below:
Set-up signs, cones, etc. around work areas to divert traffic Follow all safety rules and regulations and wear proper safety equipment (work boots – 6 inch with safety toe, hard hat and safety vest) Without Supervision must be able to set up and perform flagger position at job site based on site plan and or contractor directions Adhere to all Company Policies and Procedures Generally works under the Supervision of Project Manager, TCT, TCS, or Flagger II or maybe assigned to work independently Complete daily paperwork accurately and timely Operate 2 way radio Work well in a team environment Provide highest level of customer service to all customers Excellent attendance required, dependable transportation, good work ethic All other duties as assigned
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off Company paid GED program HSA 2nd Chance Employer
Qualifications: Must be able to read and speak English Driver’s license required Pass a drug test High School Diploma or GED Experience in Flagging/Traffic Control is preferred, but we offer training Hold a current Flagger certification or the ability to pass Company sponsored Flagger Certification Ability to lead a small crew Successfully pass Company sponsored Defensive Driver training
Work Environment / Physical Requirements: Regularly exposed to outside weather conditions; moving equipment and machinery parts; moving traffic, and fumes and airborne particles Noise level of the work environment is usually moderate/loud Regularly required to stand/walk; reach with hands and arms; for up to 14 hours a day Occasionally lift and/or move more than 50 pounds
We are an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.

Able to layout and fabricate sheet metal parts to customer requirements or aerospace specifications. Works with plans, travelers and specifications on a daily basis. Measures, marks, forms and debur sheet metal. Operates various types of equipment to include saws, cutting machines, computerized equipment, hand and power tools and light metalworking machines - to cut, bend, drill, shape or form the metal in other ways such as: Fitting, joining and fastening the sheet metal parts to construct the final products or installation pieces. Finishing products and checking that they meet quality, safety and other standards and specifications, Repairing and maintaining sheet metal work.
Other Duties: Ability to corroborate work with other sheet metal fabrication technicians. Assists in preparing work schedule, meet time constraints on work and oversees the work product. Participates in production meetings. Keeps team members informed of developments learned on the job. Coordinates with other departments and work centers to meet production goals. Attention to detail, quality and quantity of job progress. Keeps in-progress jobs moving forward to completion. May attend status meetings. Performs various other miscellaneous duties as required.
Benefits: 401(k) Dental insurance Health insurance Paid time off Vision insurance
Requirements: Sheet Metal Fabrication: 2 years (Preferred) High school diploma or equivalent. Five years of aviation experience in a sheet metal environment. Knowledge of aviation practices and procedures. Blueprint reading and interpretation. Able to multi-task and delegate authority.

Job Duties: Set-up end mill tools, materials and operate CNC Milling Station Haas Milling Stations, Motion Master Router, Diversified Machine Systems, 5 Axis Router Apply appropriate program to the machine. Edit programs as needed to perform proper runs. Perform machine set-up utilizing proper tools. Monitor feeds and speeds inspect completed product against provided drawings and interpret acceptable tolerances. Perform minor maintenance and cleaning of machine equipment. Utilize company job travelers to make parts as described. Assist with building fixtures, tooling and molds as needed. Responsible for assuring quality of machined components. Performs various other miscellaneous duties as required. Applicants must possess a can-do attitude plus the ability to prioritize and juggle multiple tasks on a daily basis. Strong sense of urgency and impeccable follow through is essential. Team oriented and the ability to work independently a must. Clear verbal/written communication skills required.
Benefits: 401(k) Dental insurance Health insurance Paid time off Vision insurance
Schedule: 8 hour shift Expected hours: 40 per week Exact Compensation: Is Determined Based on Experience.
Shift availability: Day Shift (Required)
Requirements: Machining: 5 years (Preferred) Ability to read blueprints, use various tools of measurement and verify part(s) to drawings. High school diploma with five years background in machine operation. Some computer background helpful but not required.

Overview: Lamb's Tire & Automotive operates multiple locations in the Central Texas area and is expanding! We offer complete quality automotive repair and preventative maintenance. Our ASE certified technicians will be happy to help you on a wide range of services including alignments, brake repair, oil changes, batteries, shocks and struts, belts and hoses, and air conditioning.The Senior Automotive Technician ensures that repairs are performed correctly and efficiently by qualified technicians and that the service department maintains a consistently high level of customer satisfaction. They are also responsible for effectively and efficiently diagnosing and repairing customer vehicles while adhering to the MAP guidelines and in accordance with dealership, manufacturers, and Lamb's Tire & Automotive standards. Pay: 27 - 45 Flag Hours (Competitive Pay Depending on level of and Mechanical Experience and ASE certifications) Benefits: Competitive Bi-Weekly Pay Tuition Reimbursement Paid Vacation and Sick Time 6 Paid Holidays Medical, Dental and Vision Insurance (Effective 1 st of the Month after Hire) Life Insurance (Company paid) 401(k) Retirement Savings Plan with Company Match Discounted Services on Personal and Immediate Family Vehicles Opportunity for Advancement!!! Principal Duties and Responsibilities: Diagnoses vehicles according to the appropriate level of certifications/experience. Performs complex and heavy-duty repairs. Performs work as outlined on the Multi-point Inspection and/or Repair Order with efficiency and accuracy. Explains technical diagnosis and needed repairs to non-mechanical individuals which may include the Store Manager, Service Consultants and/or customers. Recommends services that are necessary to keep the customer's vehicle in running condition; properly documents all recommendations in customer file. Follows all safety procedures and reports any concerns to the Shop Foreman or Store Manager. Maintains appropriate ASE certifications and renewals of expiring certifications. Qualifications: High School Diploma or equivalent Prefer unexpired ASE or equivalent experience or training Possess valid driver's license Possess State Inspector License preferred but nor required Ability to work a minimum of five days, including Saturdays Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. #bayard

Overview: Sun Auto Tire & Service operates multiple locations in the Central Texas area and is expanding! We offer complete quality automotive repair and preventative maintenance. Our ASE certified technicians will be happy to help you on a wide range of services including alignments, brake repair, oil changes, batteries, shocks and struts, belts and hoses, and air conditioning.The Senior Automotive Technician ensures that repairs are performed correctly and efficiently by qualified technicians and that the service department maintains a consistently high level of customer satisfaction. They are also responsible for effectively and efficiently diagnosing and repairing customer vehicles while adhering to the MAP guidelines and in accordance with dealership, manufacturers, and Sun Auto Tire & Service standards. Pay: 27 - 45 Flag Hours (Competitive Pay Depending on level of and Mechanical Experieince and ASE certifications) Benefits: Competitive Bi-Weekly Pay Tuition Reimbursement Paid Vacation and Sick Time 6 Paid Holidays Medical, Dental and Vision Insurance (Effective 1 st of the Month after Hire) Life Insurance (Company paid) 401(k) Retirement Savings Plan with Company Match Discounted Services on Personal and Immediate Family Vehicles Opportunity for Advancement!!! Principal Duties and Responsibilities: Diagnoses vehicles according to the appropriate level of certifications/experience. Performs complex and heavy-duty repairs. Performs work as outlined on the Multi-point Inspection and/or Repair Order with efficiency and accuracy. Explains technical diagnosis and needed repairs to non-mechanical individuals which may include the Store Manager, Service Consultants and/or customers. Recommends services that are necessary to keep the customer's vehicle in running condition; properly documents all recommendations in customer file. Follows all safety procedures and reports any concerns to the Shop Foreman or Store Manager. Maintains appropriate ASE certifications and renewals of expiring certifications. Qualifications: High School Diploma or equivalent Prefer unexpired ASE or equivalent experience or training Possess valid driver's license, or obtain a valid driver's license within 30 days of hire date Possess State Inspector License or ability to obtain a State Inspector license within 30 days of hire date Ability to work a minimum of five days, including Saturdays Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. #bayard

ABOUT THE COMPANYRepublic Services, Inc. (NYSE: RSG) is a leader in the environmental services industry. We provide customers with the most complete set of products and services, including recycling, waste, special waste, hazardous waste and field services.Our industry-leading commitments to advance circularity and support decarbonization are helping deliver on our vision to partner with customers to create a more sustainable world.In 2023, Republic’s total company revenue was $14.9 billion, and adjusted EBITDA was $4.4 billion. We serve 13 million customers and operate more than 1,000 locations, including collection and transfer stations, recycling and polymer centers, treatment facilities, and landfills.Although we operate across North America, the collection, recycling, treatment, or disposal of materials is a local business, and the dynamics and opportunities differ in each market we serve. By combining local operational management with standardized business practices, we drive greater operating efficiencies across the company while maintaining day-to-day operational decisions at the local level, closest to the customer.Our customers, including small businesses, major corporations and municipalities, want a partner with the expertise and capabilities to effectively manage their multiple recycling and waste streams. They choose Republic Services because we are committed to exceeding their expectations and helping them achieve their sustainability goals. Our 41,000 team members understand that it's not just what we do that matters, but how we do it.Our company values guide our daily actions:Safe: We protect the livelihoods of our colleagues and communities.Committed to Serve: We go above and beyond to exceed our customers’ expectations.Environmentally Responsible:We take action to improve our environment.Driven: We deliver results in the right way.Human-Centered:We respect the dignity and unique potential of every person.We are proud of our high employee engagement score of 86. We have an inclusive and diverse culture where every voice counts. In addition, our team positively impacted 4.6 million people in 2023 through the Republic Services Charitable Foundation and local community grants. These projects are designed to meet the specific needs of the communities we serve, with a focus on building sustainable neighborhoods. STRATEGYRepublic Services’ strategy is designed to generate profitable growth. Through acquisitions and industry advancements, we safely and sustainably manage our customers’ multiple waste streams through a North American footprint of vertically integrated assets. We focus on three areas of growth to meet the increasing needs of our customers: recycling and waste, environmental solutions and sustainability innovation.With our integrated approach, strengthening our position in one area advances other areas of our business. For example, as we grow volume in recycling and waste, we collect additional material to bolster our circularity capabilities. And as we expand environmental solutions, we drive additional opportunities to provide these services to our existing recycling and waste customers.Recycling and WasteWe continue to expand our recycling and waste business footprint throughout North America through organic growth and targeted acquisitions. The 13 million customers we serve and our more than 5 million pick-ups per day provide us with a distinct advantage. We aggregate materials at scale, unlocking new opportunities for advanced recycling. In addition, we are cross-selling new products and services to better meet our customers’ specific needs.Environmental SolutionsOur comprehensive environmental solutions capabilities help customers safely manage their most technical waste streams. We are expanding both our capabilities and our geographic footprint. We see strong growth opportunities for our offerings, including PFAS remediation, an increasing customer need.SUSTAINABILITY INNOVATIONRepublic’s recent innovations to advance circularity and decarbonization demonstrate our unique ability to leverage sustainability as a platform for growth.The Republic Services Polymer Center is the nation’s first integrated plastics recycling facility. This innovative site processes rigid plastics from our recycling centers, producing recycled materials that promote true bottle-to-bottle circularity. We also formed Blue Polymers, a joint venture with Ravago, to develop facilities that will further process plastic material from our Polymer Centers to help meet the growing demand for sustainable packaging. We are building a network of Polymer Centers and Blue Polymer facilities across North America.We continue to advance decarbonization at our landfills. As demand for renewable energy continues to grow, we have 70 landfill gas-to-energy projects in operation and plan to expand our portfolio to 115 projects by 2028.RECENT RECOGNITIONBarron’s 100 Most Sustainable CompaniesCDP DiscloserDow Jones Sustainability IndicesEthisphere’s World’s Most Ethical CompaniesFortune World’s Most Admired CompaniesGreat Place to WorkSustainability Yearbook S&P GlobalPOSITION SUMMARY: With direct supervision from a Lead Technician, Maintenance Supervisor or Maintenance Manager, a Maintenance Technician B performs repair and maintenance work on diesel and non-diesel equipment and trucks including, but not limited to, chassis components, vehicle refuse bodies and control systems, hydraulic electrical, air brake systems, general engine work, HVAC components, suspension, drive train and steering systems. The Maintenance Technician B may also perform basic tire work, such as replacement, tire rotation, and tread depth checks. Enjoy the benefits of working on a single fleet with state-of-the-art equipment, supporting our drivers as they run their routes and servicing some of the most technically advanced vehicles on the road.Tackle a new challenge every day;Maintain and repair highly intricate and powerful machinery;Receive training on new technologies and equipmentWork a regular shift in a stable industryBe recognized for exceptional performanceServe your community and your customersFollow strong career paths for professional growthEnjoy competitive wages and benefitsJoin us and help make a positive impact on your community, your environment and your worldPRINCIPAL RESPONSIBILITIES:• Maintains a working knowledge of, and moderate skill proficiency in, the following vehicle components and systems, with the ability to perform preventative and repair maintenance functions, both on-site and on the road.Chassis component repair and maintenance.Refuse bodies, including control, hydraulic and electrical systems; and air and hydraulic braking systems.Engine repair and maintenance.Suspension, drivetrain and steering systems.Heating and air conditioning.Performs line maintenance welding and fabrication.Safely provides road service when necessary to ensure that the Company’s equipment is returned to operation in a safe and efficient manner.Identifies the source of the malfunctions using a variety of electronic tools.Completes applicable Company training programs.Performs other job-related duties as assigned or apparent.The statements herein are intended to describe the general nature and level of work being performed by employees and are not to be construed as an exhaustive list of responsibilities, duties, and skills required by personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company..QUALIFICATIONS:Basic understanding of work order labor time standards.Prior experience with, or knowledge of, maintenance work to be performed on Classes 1-5 light/medium duty and heavy-duty Class 7-8 trucks, aircraft, or ships.Automotive Service Excellence (ASE) Certifications (T1-T8) are a plus but not required.Commercial Driver’s License is a plus but not required.Valid Driver’s License.MINIMUM REQUIREMENTS:Minimum of 1 year of experience in a technician position demonstrating knowledge of both gasoline and diesel powered equipment diagnosis and repair or will be graduating from an accredited automotive college or technical school within the next 3 months.Ability to perform basic inspections with limited supervision in some (not all required) of the following heavy truck, or automotive systems: suspensions & steering; general engine, transmissions, brakes, electrical, hydraulics, drive train, diesel emissions.Rewarding Compensation and BenefitsEligible employees can elect to participate in:• Comprehensive medical benefits coverage, dental plans and vision coverage.• Health care and dependent care spending accounts.• Short- and long-term disability.• Life insurance and accidental death & dismemberment insurance.• Employee and Family Assistance Program (EAP).• Employee discount programs.• Retirement plan with a generous company match.• Employee Stock Purchase Plan (ESPP).The statements used herein are intended to describe the general nature and level of the work being performed by an employee in this position, and are not intended to be construed as an exhaustive list of responsibilities, duties and skills required by an incumbent so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company.EEO STATEMENT:Republic Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, protected veteran status, relationship or association with a protected veteran (spouses or other family members), genetic information, or any other characteristic protected by applicable law.

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationHigh school diploma, GED with 15 college credits, or GED Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Fire Alarm Service Foreman Austin, TX, USAReq #1326 Monday, July 1, 2024 Established in 2009, Impact Fire Services was the vision of a group of experienced industry professionals that wanted to build a best-in-class fire protection and life safety company. Through superior customer service and technical expertise, we have developed long-standing relationships with the leading businesses in our markets. We are a full-service fire protection company, providing installation, maintenance, inspection, monitoring, and retrofit of fire safety systems. Come join a dynamic team of fire protection professionals, many of whom carry NICET and manufacturer certifications in leading brands. Impact Fire has deep experience supporting many industries including retail, healthcare, education and restaurants. Today, we operate over 30+ district offices and employ over 1,100 employees across multiple states throughout the USA. At Impact Fire Services you can learn a trade with multiple career paths in fire and life safety while benefiting from an employee focused company culture that allows you to gain mentorship and training provided by leading experts at one of the fastest growing companies in the industry. Whether you have transferable skills, prior industry experience, or are looking to start your journey, our apprenticeship programs will give you the support and knowledge you need to go further in your career. Why work with us At Impact Fire, we are a group of hardworking, dedicated fire protection professionals committed to protecting lives and property from fire. Our cohesive team spirit and customer service-oriented culture are expressed in all that we do. We operate with the belief that every team member plays a critical role in our success. We operate in 30+ district office locations across the United States, supporting industries ranging from retail and healthcare to education and restaurants. Please text “ImpactFire” to to connect with Ember, Impact Fire’s Recruiting Assistant, to learn more about this position and the company.Benefits of joining Impact Fire Services When you join Impact Fire you will receive:Competitive compensationPay is on a weekly cycle, every FridayCareer Advancement OpportunitiesCompetitive benefits, including healthcare, dental, vision, life insurance, paid time off and holidays Company paid short and long-term disability Immediately vested in our 401(k) company match Exceptional guidance and support from our managers Collaborative culture & environmentRobust training opportunities with company reimbursement upon achieving required licensing Apprenticeship programs for fire sprinkler, fire alarm and inspection positions Opportunity to work alongside some of the best talent in the fire protection industry JOB SUMMARY:Oversee service and repair existing fire alarm systems. Projects will include Industrial, Commercial and some Residential. Can comprehend NFPA code, design/ installation methods, calculations & material lists for fire alarm systems.Up to a $5,000 Sign-On-Bonus based on experience.Position is located in Austin, TX.JOB RESPONSIBILITIES:Generally responsible for troubleshooting and repairs of existing fire alarm systems.Understand design & Layout of Fire Alarm SystemsField SurveyingFire Alarm TroubleshootingCommunication with the customer.Proper reporting to the local AHJ.JOB REQUIREMENTS:NICET certification preferred but not requiredGeneral mechanical knowledgeMust possess an active Texas Fire Alarm LicenseExperience in Fire Alarm service or DesignDemonstrated competency in verbal and written business communication skills.Possess and maintain a valid driver’s license in accordance with Company guidelinesAble to complete documentation and administrative duties as necessary; proficient in the use of personal computers and Microsoft OfficeDetailed oriented and demonstrate a high degree of accuracy when performing job duties Successful completion of a drug test and pre-employment background screening is required. MVR checks are required for all driving positions. We look forward to talking with you about career opportunities with Impact Fire Services. For consideration, please apply on-line.Employment with an Equal Opportunity Employer (EOE) including disability/veterans. Other details Pay TypeHourly

Overview: Tire Technician – Part-Time – New BraunfelsDiscount Tire1312 N IH 35NEW BRAUNFELS, TX, 78130-2815OverviewThe Tire Technician is the backbone of our success and is the first step in your journey with Discount Tire. Our Tire Technicians repair, install, and maintain tires on cars, trucks, and commercial vehicles. At Discount Tire, we commit to growing our employees and routinely promote from within. Part-Time100% On SitePay Scale From $15$16Starting ImmediatelyAt a Glance:A Part-Time Tire Technician at Discount Tire performs the following duties, including but not limited to:Install new tires and wheelsPerform maintenance on tires, including rotations, balancing, repairs, and cleaningRewarding Career Path to ManagementFollow safety guidelines and best practicesParticipate in hands-on, on-the-job trainingProvide a world-class customer service experienceWhat We’re Looking For:Must have an upbeat outlookMust be dedicated and reliableMust be coachable and trainableMust be able to lift a minimum of 50 lbs.Must enjoy and excel in a team environmentMust be able to function well in a physically demanding environmentWhat We Offer:Discount Tire is committed to supporting our employees. We continually assess our benefit offerings and the needs of our employees to ensure we offer the support our employees need, personally and professionally.Part-Time Benefits:Paid TrainingCompetitive PayWeekly Paychecks401(k) Retirement PlanEmployee Referral BonusEmployee Assistance ProgramEducational Assistance ProgramExclusive Employee Discount ProgramDiscount Tire stands by our Veterans. We are proud to say that we are a Veteran-Friendly organization. Glassdoor names Discount Tire as one of the Best Places to Work in 2018, 2019, 2020, and 2021.Why Discount Tire At Discount Tire, we are dedicated to helping our employees reach their full potential and achieve their career goals. Our comprehensive mentoring program is designed to provide the support, knowledge, and skills needed to succeed and grow within the company. We are committed to promoting from within and investing in the development of our employees. With our strong emphasis on the principles and standards that define who we are as a company, you will have the opportunity to build a lucrative and fulfilling career at Discount Tire. In fact, all our store managers started in our stores and have progressed through the ranks thanks to our commitment to coaching and mentoring our people. Join us and see where your career can take you.Who We Are:In 1960, Bruce T. Halle founded the first Discount Tire in Ann Arbor, Michigan. Starting with an inventory of only six tires, Halle grew his store by cultivating connections to the community and honoring relationships with customers and employees. Through respect, fairness, and a willingness to always pay it forward, Halle transformed his store into a thriving, responsible business.Today, Discount Tire is America’s largest independent tire and wheel retailer. Our 1,100+ locations across 37 states provide a wide range of product choices, affordable pricing, and expert staff. More importantly, all our stores offer the individual customer focus and warm personal touch you’d expect from a neighborhood store. In the spirit of the first Discount Tire store, we maintain commitments to mutual respect and fairness for all through community engagement and responsible growth.Discount Tire continues to prosper because of the vision that lives and thrives in the hearts of our employees, from the store level to the corporate level. Visit one of our stores today and experience the values that make Discount Tire the nation’s most trusted tire and wheel retailer.Learn more about our Company, our culture, and our benefits by visiting careers.discounttire.comDiscount Tire provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Responsibilities: #discounttire21

StandardAero is one of the largest independent maintenance, repair, and overhaul providers in the aerospace industry. At our plants, our units engage in a variety of work scopes involving trouble-shooting, problem solving, and working together to embody our #1 priority, which is ensuring the safety of our people and our product.The responsibilities of the role include:Performs setup, programming and operation on a variety of machining equipment.Machining products to tight tolerances.Working independently and as a team to achieve maximum quality.Computing and verifying dimensions to ensure accuracy.Observing all applicable safety practices and immediately reporting any unsafe practices or conditions.Recognizes and understands flight/product safety critical parts and processes.Responsible for immediately reporting flight/product safety concerns.Participates in proactive risk analysis of flight/product safety critical parts and processes.Reads and interprets specification manuals, blueprints, templates and layouts to determine machining operation to be performed.Computes dimensions and tolerances and measures and lays out work pieces.Verifies dimensions of products for accuracy and conformance to specifications using precision measuring instruments such as calipers, gauges and micrometers. Troubleshoots, debugs and modifies to achieve expected performance.Adjusts and sets up machine tools for use by machining tool operators.Participates in continuous improvement of cell processes.Cross trains in other complementary skills and seeks endorsements for those skills as needed to support production requirements.Moves between production assignments that utilize multiple skills endorsements as needed to support production requirements.Participates in the cross training of other technicians as needed to support production requirements.Responsible for observing all applicable safety requirements and reporting immediately any unsafe practices/conditions.Carries out other duties as assigned.Education Requirements:High school graduation and completion of a diploma training program at a college or technical school.Technical Requirements:High degree of mechanical aptitude, accuracy and precision.Thorough knowledge of manufacturing, tool design, fabrication methods and processes, metallurgy and heat treating.Working knowledge of related company instructions, company processes, rework process instructions, original equipment manufacturer manuals, and MSDS labels.Working knowledge of production management computer systems and other related internal control systems.Regularly required to stand for prolonged periods.Completion of a machinist apprenticeship program; or equivalent.Attainment of trade certification.Directly/indirectly related work experience representing continuous learning and required for someone to perform this job competently is one to three years. The requirements for an ideal candidate include:The ability to read and interpret manuals, technical drawings, and blueprints.Proficient in the use of precision measuring instruments and hand tools. The ability to follow both written and verbal instructions.The ability to lift up to 50lbs without assistance.The ability to stand for extended periods of time.Working knowledge of welding, hydraulics, electricity and pneumatics.Ability to read, understand and interpret blueprints.Strong mathematical aptitude.At StandardAero, we offer:A clean, safe, and temperature controlled work environment.Competitive compensation structures and a total rewards package.An opportunity to work with a variety of machines (Mills, Grinders, EDM's, CNC's, etc.).A variety of shifts and hours.Opportunities for horizontal and vertical movement within the organizationStandardAero is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, pregnancy, age, national or ethnic origin, religion, sexual orientation, gender identity or expression, transgender status, genetic information, status as a protected veteran, and basis of disability status or any other federal, state or local protected class.Must meet US Persons requirements per ITAR.About UsRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero

$18.00 - $22.00/hour Salary is determined by the applicant's experience, knowledge, skills, and abilities, as well as internal equity and alignment with market data. Immediately hiring! We're looking for responsible, detailed people who are ready to accelerate their automotive repair career! Whether you have worked in an auto garage or car dealership, this job is for you! Become a member of our family-friendly Avis Budget Group enterprise. What You'll Do:You will perform basic repairs on a wide variety of vehicle makes and models with minimal technical supervision, including some preventative maintenance (oil, lube and tire repairs) and depending on your technical expertise, warranty repairs. You may assist our experienced mechanics in complex repairs.Perks You'll Get:Bi-weekly hourly wageOn-the-job training to expand your automotive abilities, help to obtain ASE CertificatesPaid time offMedical, Dental and Other Insurance Contribute up to $270 as a tax-free benefit for public transportation or parking expensesRetirement benefits (401k)Employee discounts, including discounted car rental and discounted prices on the purchase of Avis/Budget carsWhat We're Looking For:High school diploma or equivalentValid Driver's License and good driving recordMinimum 1 year auto repair experience, 1 ASE (ability to obtain 2 more ASEs in first year)Willingness to work in a mechanical shop with moderate or loud noise levelMust possess all tools required for auto repair and maintenanceBasic computer skills (typing, data entry)Flexibility to work all shifts Previous OEM experience a bonus! Who We Are Avis Budget Group is a leading provider of mobility options, with brands including Avis, Budget & Budget Truck and Zipcar. With more than 70 years of experience and 11,000 locations in 180 countries, we are shaping the future of our industry and want you to join us in our mission. Apply today to get connected to an exciting career, a supportive family of employees and a world of opportunities within our growing enterprise.The fine print: Avis Budget Group is an equal opportunity employer - M/F/Veterans/Disabled. This role requires the ability to lift up to 50 pounds, continuously stand, walk, sit and kneel frequently, and enter and exit vehicles. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. This position may be with any affiliate of Avis Budget Group.KyleTexasUnited States of America

Priv is the leading on-demand beauty and wellness service app that delivers professionals straight to our client’s door for hairstyling, makeup, massage, nail, facial, spray tan, ear piercing, and fitness services. We currently serve 30+ markets in the United States! We are seeking talented and professional Makeup Artists to join our community of freelance pros in your area. Be a part of our loyal team of professionals, committed to transforming the beauty and wellness industry by delivering clients a luxury experience anywhere, anytime. We work with YOUR availability; you never have to take an appointment that doesn't fit into your busy life. Earn additional income doing what you love and meeting new clients! Why Priv “I've been with Priv for 4 years and love the team, flexibility and company. Would never work anywhere else!” - Prv Professional Be an independent contractor and work when and where you wantHave the freedom to work for other apps or salonsPriv is a one-stop-shop to offer all of your services We offer competitive rates and compensation Attend professional development workshops to help you grow in the industry Build lasting relationships with clients and other beauty and wellness professionals Participate in industry level events, premiers, trade shows, and fashion shows Pay: $70 - $100 per hour https://gopriv.com/

COMPANY OVERVIEWAs the nation's largest producer of clean, carbon-free energy, Constellation is a company purposely-built to meet the challenges of the climate crisis. Constellation has been the leader in clean energy production for more than a decade and we are growing our company and capabilities. Now, we're accelerating, speeding our low-carbon or no-carbon power to more people in more places, day and night, providing our customers and communities with options to buy, manage and use energy as part of their decarbonization mission. The race is on to confront the climate crisis and Constellation is ready to meet the challenge. Come join us as we lead energy, together.TOTAL REWARDSConstellation offers a wide range of benefits and rewards, designed to help our employees thrive professionally and personally. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays and sick days and much more.Expected salary range of $110,700 to $123,000, varies based on experience, along with comprehensive benefits package that includes bonus and 401(k). PRIMARY PURPOSE OF POSITION This position is responsible for the efficient and effective operation within an assigned organization, in support of the Company's goals and objectives. Whether in operations or maintenance, the Foreman is expected to ensure that safe, continuous and economical processes and procedures are carried out at all times. Within their duties is the responsibility to adhere to the Company's business and ethical standards and assure compliance with all applicable government and industry regulations and practices. Will perform backup duties as required by O&M Manager. PRIMARY DUTIES AND ACCOUNTABILITIESDirect the work of employees in meeting safety and productivity goals and ensure the team and its members follow all work practices.Demonstrate troubleshooting and problem solving capabilities when called for by exercising good judgment and decision-making skills. This applies to equipment assets and human assets.Ensure that employees perform their duties in a manner consistent with a cognizance of customer awareness and concern.Assist in the development of and execution of work schedules and tasks given to assigned employees, and ensure they are completed in a timely and efficient manner.Communicate in all directions in an efficient manner: with employees assigned and with management when and as called upon to do so. This includes ensuring the work team is aware of information from management, and that management is aware of the information it needs to make decisions in support of strategies and goals.Ensure adequate "turnover" between shifts to transfer of information happens across all shifts for continued safe and reliable operations.Review routine and daily reports to ensure adequate completion of all rounds, chemistry and environmental rounds and disposition any findings as appropriate.Plan work and oversee vendors in a way that ensures safe and reliable operationsDevelop assigned employees such that their skill sets on the job are increased. Coach new and existing employees in processes, procedures and practices. Make recommendations as to performance improvement both to assigned employees and to organizational management. Participate in the Company's formal performance evaluation process of assigned employees.Support the Company's core values and exhibit positive leadership behaviors.Perform all other duties as assigned.MINIMUM QUALIFICATIONSAssociates Degree in Engineering Technology, Electronics, or related field ORHS Diploma with minimum of 18 months of trade or technical training in Power Plant Technology or related fieldAt least eight (8) years experience as a Technician in an appropriate area of plant operations, maintenance, fuels or I&C1st class qualified in discipline.Demonstrated leadership skills to include attention to safety (personal and environmental schedules, equipment and its efficient use, and the use of employees to get the job doneEffective communication skills in all directionsAbility to plan and organize work through scheduling and making appropriate assignments to best utilize available talentMotivational skills that foster individual and team development and accomplishmentFull understanding and appreciation for procedures, policies, processes and practicesAbility to use the technology and equipment associated with both the Foreman Position and those positions assigned to the ForemanNo formal discipline within the last 24 monthsAbility to work in a power plant environment that includes climbing, walking long distances, and standing for the majority of the timeAbility to lift a minimum of 50 pounds

SUMMARY: Develops and coordinates the design and production of electronic components from inception to completion by performing the following duties.ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Other duties may be assigned.Conducts studies on customer proposals for connector systems.Develops connector systems based on customer input, production specifications, test data and standard engineering practices.Details drawings and coordinates building of prototype product and testing.Uses computer assisted engineering and design software.Responsible for ensuring the final design meets functional and performance specifications.Responsible for ensuring that designs and projects are complete on time and at a reasonable cost.Develops manufacturing process to produce newly designed parts.Designs and details tools for making components or for assembly.Resolves problems related to assigned projects by working with vendor, customers, shop personnel and others as necessary.KNOWLEDGE, SKILLS, AND ABILITIES Requires knowledge typically acquired through,Completion of a Bachelor’s degree from a four year college or university, vocational or technical school,Five to seven years related experience and/or training; or equivalent combination of education and experience.Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.Ability to write reports, business correspondence, and procedure manuals.Ability to effectively present information and respond to questions from groups of managers, clients, and customers.Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.Ability to define problems, collect data, establish facts, and draw valid conclusions.Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.QUALIFICATIONSTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, talk, hear, walk, and use hands to finger, handle, or feel objects, tools, and controls, and reach with arms and hands. The employee may be required to regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, depth perception and the ability to adjust focus.WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee occasionally works near moving mechanical parts and is occasionally exposed to fumes or airborne particles, risk of electrical shock, and vibration. The noise level in the work environment is usually moderate and travel is limited to less than 5%.*Sign-On bonus of $5K will be awarded in accordance with our current policy and payable after the first 30 days of employment[Equal Opportunity Employer - Disability/Vet]This job may require applicant to conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. 1157, or (iv) Asylee under 8 U.S.C. 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITARhere.

Overview: With over 150 years of experience, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets. Headquartered in Southern California, CoolSys has more than 2,000 highly trained, field-based service and installation experts, serving more than 45,000 customer locations across North America daily . WHAT WE OFFER We are a large company serving many unique customers - because of this, we provide job stability and long-term opportunity for career growth. We invest in our technicians by offering: Ongoing Education & Training Exposure to a Large Variety of Projects Industry-leading Benefit Packages Advanced support and tools designed to improve your workflow PAY $25-$30 HR Responsibilities: The HVAC/R Technician role is primarily responsible for performing repairs and maintenance to a variety of HVAC and Refrigeration equipment including air conditioning, electric motors, heating units, heat pumps, hermetic compressors, commercial furnaces, boilers, burners, intake and exhaust fans, economizers and humidifiers, RTUs, remote condensing units, ice machines, walk-in coolers & freezers, and upright refrigerators & freezers. Qualifications: 3+ years of commercial experience as an HVAC and Refrigeration Technician Active EPA Certification Valid driver's license Excellent customer relations and interpersonal skills Mechanical aptitude and troubleshooting skills Ability to safely lift to 50 lbs., climb and balance on a ladder, and work in elevated/high locations. Join Us: Today, there are 22 different companies that make up the CoolSys family of brands . Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth! Connect with us on Facebook and on Twi t ter . Coolsys is an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics are encouraged to apply. Pre-employment background screening (criminal and MVR ) a nd drug testing (including for marijuana) are required for all positions. Coolsys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.

Build your best future with theJohnson ControlsteamAs a global leader in smart,healthyand sustainable buildings, our mission is to reimagine the performance of buildings to serve people,placesand the planet. Join a winning team that enables you to build your best future!Our teams are uniquely positioned to support a multitude of industries across the globe.You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees withan experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of theJohnson Controlsfamily and thrive in an empowering company culture where your voice and ideas will be heard – your nextgreat opportunityis just a few clicks away!What we offer:Competitive salaryPaid vacation/holidays/sick timeComprehensive benefits package including 401K, medical, dental, and vision careOn the job/cross training opportunitiesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policy What will you do Mechanical PM skills a plus!Under general direction, acts as the on-site project leader to plan, implement, and complete control systems projects with assigned customers. Performs or delegates tasks as the need arises to implement and fully complete assigned projectsincluding:hardware design, system programming, installation coordination, system and network commissioning and project closeout. Responsible for the overall financial results of assigned projectsincluding:costs, project billings, and collections. Maintains an effective balance between customer happiness and project financial results. Actively pursues selling change orders. Coordinates communication with the customer during all phases of the project. Ensureaccurateopera execution of warranty. Provides work direction to subcontractors, electrical installers, technicians, designers, and administration as vital.Ensures work performed is in compliance with state, local and Federal legal requirements and operates on the job with the highest of ethics. Adheres and ensuresJohnson Controlsstaff and subcontractors adhere to all safety standards. How will you do it Completes typical installation hardware design and software programming using established standards asrequired. Provides detailed information to communicate design and operation to customers,Johnson Controlsstaff and subcontractors. Actively pursuesadditionalwork through change orders. Evaluates the contractual scope of work and the impact of client issued bulletins, field directives and/or scheduling changes. Communicates both technical andbusiness relatedissues with the clients. Manages theselection, ordering,budgetand delivery schedule of materials to beprocuredfor the projects assigned. Secures pricing and availability from outside vendors and suppliers, mechanical and electrical subcontractors including scope,termsand conditions. May request several bids in pricing process.Oversees subcontractor payment and billing processes. Provides jobsite coordination for panel and field device physical locations. Ensures installation isin accordance withJohnson Controlsliterature and project requirements. Manages and completes the loading, device verification, and commissioning of all system controllers as the need arises. Validates complete system functionality and resolves issues with subcontractors and others to ensure proper operation. Providesaccurateprojectas-builtand commissioning documentation. Manages costs,billingsand collections. Complete project billings ina timelyandaccurateformat to the client. Maintains profitability goals and positive cash flow. Schedules monthly project cost in cost accounting system.Responsible for project cost hitting projects as scheduled. Provides coaching, mentoring and technicalassistanceto System Technicians, Electrical Installers and System Designers. Provides technicalassistanceto subcontractors. Ensures that delegated tasks are done accurately,on-time, billed, within budget and within scope of the contract. Optimally communicates the status of projects to management as the need arises and provides monthly forecasts of revenue, costs, and gross margin. Sends warranty letter to JCI customer upon meaningful completion of project and ensuresaccurateexecution of warranty. Develops project plans and coordinates the required resources to ensureaccurateand efficient installation and completion of assigned projects. Performs site-specific training for owner/operator on the total system in full or withassistance. Ensures owner/operator has been trained. Provides proper documentation and manuals for system operation. Develops andmaintainsviablelong-term relationships with contractors, clients,consultantsand subcontractors. Attends job progress meetings asrequired. Adheres to safety standards. High degree of regard to employee and subcontractor safety. What we look for Required Minimum of a technicalAssociates Degreewith two years of field experience or four years of equivalent related field experience in the HVAC industry. Must have relevant technicalhands onexperience in systems design and commissioning of digital HVAC controls systems. Must have the ability to communicate technical material to a non-technical audience. Mustdemonstratethe ability to perform work independently.Where legally permissible, if hired, candidateis required tobe fully vaccinated against Covid-19 no later than their start date, unless candidate has a valid medical condition orsincerely heldreligious belief precluding them from receiving the vaccine. Preferred Strong digital literacy. Mechanical Project Management Skills a plusMust have knowledge of control theory and HVAC systems. Knowledge of projectaccounting,costing principals and contracting preferredJohnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

AutoReqId: 19988BR Pay Class: Hourly Hourly Pay Rate: 27.92 HR/DOE Department: Maintenance Line of Business: Aggregates Position Type: Full-Time Job Posting: Heidelberg Materials is seeking a Day ShiftMaintenance Electrician for our Servtex quarry located in New Braunfels, TX . Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. What You'll Get To Do Are you in the market for a job that is Electrifying Heidelberg Materials is seeking a Maintenance Electrician to perform basic corrective, preventive and predictive plant maintenance, and operational field support. Perform electrical repair and maintenance involving disassembly, overhaul, assembly, and adjustments of crushing and screening or mobile equipment componentsPerform electrical repair and maintenance on ready mix concrete and hot mix asphalt plantsMaintain proper tool/parts inventory for specified jobsPerform scale and automation checks for concrete and asphalt plantsProduce accurate estimates and project costsComplete maintenance projects in a timely manner to ensure production goalsMaintain up to date written or data input spreadsheets on all equipment repairsEnsure that all equipment repairs are performed accurately to the manufacturer standardsEnsure compliance with all health, safety, and environmental regulations, as well as company policies and procedures; assist with physical inspections of plant property/departments and immediate reporting of unsafe conditions and/or accidents What We Are Looking For High school diploma or GED requiredCompletion of an apprenticeship program or certification strongly preferredPrefer 2 years prior maintenance experience with an emphasis on electrical workSome welding experience desiredOpen pit mining operations and aggregate products experience a plus.MSHA Part 48 training a plusPhysical Requirements: sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below shoulder, work extended periods of time in same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 75 lbs., work in confined spaces, capable of wearing respiratory and other personal protective equipment No search firms please Heidelberg Materials is a drug free workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Dominium is helping tackle the affordable housing crisis – and we’re looking for motivated candidates to join our team and help further our mission. With offices in Minneapolis, Atlanta, Dallas and Phoenix, Dominium is one of the nation’s most respected and innovative affordable housing development and management companies. We create quality, affordable homes and engage with our residents daily to create a strong sense of community and connectivity. Join us in making a difference in people’s lives every day at a company where you can challenge yourself to develop both personally and professionally. We are currently seeking a Lead Maintenance Technician to join our team at The Springs, a 76 unit apartment community in Dripping Springs, TX. Position Summary: As a Lead Maintenance Technician, you will be responsible for the general appearance and maintenance of the property to help create a great living experience for our residents. Responsibilities: Monitor property for any repairs or replacements that may ariseComplete work requests for common areas and apartment unitsPerform preventative maintenance on propertyAssess and repair appliances as neededAssist in preparing vacant units ready for new residentsSupervise site maintenance personnel and other staff as assignedOccasional on-call duties(trip stipend provided if called back to site after regular work hours)Create and maintain a safe work environment Qualifications: 2 - 3 years previous experience in maintenance preferredDemonstrated proficiency in carpentry, plumbing, electrical systems, and general repairHVAC and EPA experience preferredCPO certification preferredValid drivers' license and insurance may be required About Us:Dominium is one of the leading affordable housing development and property management companies nationwide. We operate in approximately 20 states and employ over 1,200 employees. For 50 years, we have offered excellence to the development and management of affordable housing communities across the United States. Dominium’s values – creating long-term value, developing people, integrity, and growth – are built upon our company’s mission and vision. We offer a competitive salary, incentive bonus program, training and development programs, career growth opportunities and community volunteer and outreach programs. We also offer a comprehensive benefits package for eligible employees including Medical, Dental, Life & Disability, Paid Time Off, 401(K), Flexible Spending Accounts, Employee Recognition & Wellness Programs. Dominium is committed to a diverse and inclusive workplace. Dominium is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.

JOB OPENING JOURNEYMAN ELECTRICIAN WHAT WE PROVIDE: This is a year-round position at Six Flags Fiesta Texas, in San Antonio, TX. It features a competitive minimum hourly rate of$28 per hour or morebased on experience, with a generous benefits package, which includes Medical, Dental, Vision, Time Off (Vacation, Sick, and Jury Duty), 401k with matching and a minimum average of 30+ hours per week offered and expected on a year-round basis with flexible scheduling. Additionally, earn an extra $1 per houron all shifts after 5pm and earn anextra $5 per houron all Saturday and Sunday shifts. We also offer a$500-$1000annual tool reimbursement program,$200annual boot reimbursement,FREEuniforms with laundry service,Weekly Pay, nationwideFREEpark access and parking for yourself and a guest, season passes for family, annual complimentary park tickets for friends and family, Employee Stock Purchase Plan,40%offof food and merchandise, access to exclusive employee only events and more! WHAT YOU WILL DO: As a Six Flags Electrician you will spend the day conducting day-to-day maintenance of all electrical systems throughout the park and responding to calls as needed, to ensure a safe and vibrant experience for all guests and employees. HOW YOU WILL DO IT: Performing daily inspections of assigned rides and attractions.Performing rehab work on theme park rides and attractions.Completing work orders and electrical installations.Troubleshooting ride control systems.Maintain and repair pump controls, alarm systems, laundry, and food beverage equipment.Maintain emergency generator systems.Maintain Energy Management system.Maintaining a clean and safe work environment.Performing any other duties as required by Maintenance Leadership and Management. WHAT YOU WILL NEED: Valid Journeyman Electrician License with 5 years minimum experience in electrical maintenanceMust be at least 21 years of ageHigh School Diploma or valid GEDMust have a valid State Driver License and a State Electrician LicenseAbility to work varied shifts, nights, weekends, holidays and available for overtime as neededAbility to work in all-weather elements such as sun, heat, cold, rain and various heightsStrong understanding of electric control systems and devices and fundamental electronic principlesAbility to uphold Guest First Standards as set forth by company policy.Demonstrable communication skills in English (reading, writing, and speaking), and ability to keep accurate written records. OTHER NOTES: All other duties assigned or necessary to support the park as a whole.Reports to the department Maintenance Supervisor. While this job description is intended to be an accurate reflection of the requirements of the job, management reserves the right to add or remove duties when circumstances (e.g., emergencies, changes in workload, rush jobs, or technological developments) dictate. This a year round hourly position at the Six Flags Fiesta Texas, in San Antonio, TX. It features a competitive salary and a generous benefits package. Interested Candidates should apply online at SixFlags.com/Jobs Six Flags is a Smoke and Drug Free Equal Opportunity Employer

If you're looking for the benefits of joining an industry leader, with a high-charged, energy-filled environment, then you can stop looking, because you have found what you're looking for in the Mechanic C position at our Hertz Rent-A-Car location. Bring your energy, drive, and motivation to Hertz, and set your goals on cruise control! The Hertz Corporation, a world leader in the car rental industry, currently seeks energetic team players to join our team. The Mechanic C is an entry level position with the Hertz Corporation and is the launching point for our maintenance team. In this role you will be performing preventative maintenance, with a focus on Oil and Tire Changes. Must be a quick learner, and have an assortment of tools, including oil filter wrenches, socket set, and a toolbox to keep them in. Wages: $15.00/hr. Educational Background: High School Diploma or equivalent preferred Professional Experience: Entry level position with no required experiencePreferred prior experience with automotive repair (personal or professional) Knowledge: Must be able to perform vehicle repairs with oversightAbility to use shop equipment such as lifts, tire changing equipment, alignment machines, and scan tools Additional Notes: Must have tools to perform necessary repairs 3/8” and ½” impact wrenchSockets wrench - metric and standard - preferably long and short lengths.Oil Filter wrenches and toolsTPMS tool - reset tire sensorsCombo wrenchesScrewdriversMust have a Valid Driver’s LicenseThe Hertz Corporation operates the Hertz, Dollar Car Rental, Thrifty Car Rental brands in approximately 9,700 corporate and franchisee locations throughout North America, Europe, The Caribbean, Latin America, Africa, the Middle East, Asia, Australia and New Zealand. The Hertz Corporation is one of the largest worldwide airport general use vehicle rental companies, and the Hertz brand is one of the most recognized in the world. US EEO STATEMENT At Hertz, we champion and celebrate a culture of diversity and inclusion. We take affirmative steps to promote employment and advancement opportunities. The endless variety of perspectives, experiences, skills and talents that our employees invest in their work every day represent a significant part of our culture – and our success and reputation as a company. Individuals are encouraged to apply for positions because of the characteristics that make them unique. EOE, including disability/veteran

Job Functions, Duties, Responsibilities and Position Qualifications:Position Summary:The Facility Associate is responsible for managing routine warehouse operations and performing routine maintenance and repairs around the building and within the laboratory. This dynamic position supports lab operations across multiple departments to include escorting/assisting vendors & professional trades to troubleshooting and maintaining equipment. Duties & ResponsibilitiesSupports essential central services, such as security, D.I. water systems, pest control, biohazard waste, refuse disposal, dry ice and liquid nitrogen deliveries.Receives departmental deliveries at warehouse dockResponsible for recording warehouse and office supply inventoryReceives, stocks, rotates, and enters all packing lists into the Procurement SystemPerforms daily, weekly, & monthly equipment checks on safety and lab equipmentMaintains upkeep of the buildings/grounds and performs minor repairsMonitors, maintains, and investigates temperature units in all departmentsInteracts & Escorts vendors: HVAC, plumbing, electrical, lighting, and housekeepingCompletes documentation of facility procedures in accordance with organizational SOPs in support of accreditation standardsHandles biohazardous and chemical waste as neededShips and receives packages including patient samples to lab clients and affiliate businessesAssists with office setup, casework installation/removal, and furniture arrangement as neededRepresents the business in a professional, positive, productive, and calm demeanorEducation and Experience:High School Diploma or GEDKnowledge, Skills, and Abilities: Familiarity with basic concepts of plumbing, HVAC, electrical, and mechanical equipmentProficiency in English for effective communicationAbility to interact in a professional, cordial manner with variousGeneral knowledge of facility support systems and infrastructureDisplay good attention to detail and demonstrate a sense of urgencyPhysical Requirements: Requires physical effort (life/carry up to 80 lbs); pulling and pushing of objects, occasional reaching, stooping, bending, kneeling, crouching; must be able to hear, see, and respond adequately; use of hands and fingers; frequent prolonged standing.May be required to work under extremely stressful conditions with time constraints and crisis situations.May work on ladders and outdoors.Work Conditions: Works in a temperature controlled environment with possible exposure to biological and chemical hazards.May be required to operate fire and safety equipment or follow other safety procedures in emergency situations.Scheduled Weekly Hours:40Work Shift:1st Shift (United States of America)Job Category:Laboratory OperationsCompany:Sonic Reference Laboratory, IncM-F, 1st Shift, 8:00am - 5:00pmSonic Healthcare USA is an equal opportunity employer that celebrates diversity and is committed to an inclusive workplace for all employees. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, age, national origin, disability, genetics, veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Are you ready to embark on an exciting career with ADB Companies, a leading nationwide provider of technology infrastructure solutions We are currently seeking a Foreman to join our wireline team and lead the installation of fiber optic cable for various telecommunication projects. This is an excellent opportunity for individuals seeking growth in the utility construction industry, and ADB is committed to providing extensive development within the trade. At ADB, we prioritize the safety, well-being, and career growth of our team members above all else. Our renowned world-class culture, work stability, and career development opportunities have set us apart in the industry. Join our team and become part of an ALL IN culture that values safety, wellness, learning, diversity, inclusion, and community engagement. As a Foreman, you will play a crucial role in our operations. Your responsibilities will include proficient-level manual labor, equipment operations, leading crews, and ensuring the successful completion of projects on various safety-sensitive utility construction sites. You will demonstrate your expertise in utility print and map reading, while also providing guidance and training to other construction crew members on fiber installation practices, print reading, equipment operations, and OSHA requirements. Safety is our top priority, and you will be expected to lead by example, following and enforcing all required safety practices. Additionally, your strong communication skills will be essential as you engage directly with customers, subcontractors, homeowners, and address any complaints or issues that may arise. Here's an overview of the key responsibilities: Perform proficient-level manual labor and operations, including hand digging with a shovel, setting up traffic control, operating entry-level equipment, placing fiber, loading materials, leading crews, and more on various safety-sensitive utility construction sites.Showcase your proficiency in utility print and map reading, ensuring accurate project execution.Demonstrate at least 1 year of independent operating experience with various equipment, such as directional drills, mini, plow, hydro, etc. You will be fully trained in all safety regulations related to operating heavy equipment.Lead and support the setup and shutdown of utility construction projects, including traffic control, in diverse conditions such as highways, side streets, parking lots, and downtown locations.Exemplify a safety-first approach, ensuring compliance with all required safety practices during safety-sensitive duties.Communicate professionally with customers, subcontractors, homeowners, and effectively address any complaints or issues that may arise.Train and mentor other construction crew members on fiber installation practices, print reading, equipment operations, OSHA requirements, and more.Load and unload materials and equipment from vehicles at construction yards and jobsites.Lead by example, ensuring adherence to safety rules and regulations, and effectively guide others on jobsites.Engage in on-the-job training with Senior Foreman and/or Supervisors to further develop your skills in the utility construction trade.Foster a culture of hazard identification by utilizing the pre-task process.Perform other duties as requested, contributing to the overall success of the team. To be considered for this role, you should have a minimum of 2 years of utility construction experience, preferably as a crew leader or foreman. Additionally, you should possess at least 1 year of heavy equipment operating experience, including Hydro, Drill, Mini, and Plow. A valid driver's license with a clean driving record is necessary, and a CDL License (or the ability to obtain one) is required. This position starts at $24 an hour & is determined by experience & skillset. Join the ADB Companies team today and unlock endless opportunities for growth in the utility construction industry. Experience our supportive, safety-focused environment and be part of a company that values your well-being and career advancement.Licenses & CertificationsRequiredDL Class A CDL

The CSC ServiceWorks Story: We’re the leading provider of commercial laundry services, consumer services technology, and air-vending and EV solutions throughout the United States and Canada.Our Best-in-Class team of 2,500 dedicated professionals’ benefit from work that’s steady (but never boring), time to enjoy what matters, appreciation and rewards in return for hard work and accountability, and support in growing a fulfilling career. Overview: Appliance Install DriverMonday - FridayAs a CSC Appliance Install Driver your days will be active,delivering and installing laundry and/or air vending equipment to a variety of places in your assigned service area. You’ll have a constant change of scenery, engage with clients and consumers daily, and learn new technology in an environment that supports your success in both your career and life.Position Duties:Deliver and Installlaundry or air equipment to customer's homes and client locationsDeliver and Install ancillary technology (card readers, digital enhancements)Drive a box truck to deliver, pick up, or repair/replace washers, dryers and/or air machinesPrepare equipment for delivery (assemble required parts prior to loading on trucks)Instruct customers and/or clients how to operate equipment in a safe and effective mannerStaying physically active loading and unloading your company truck using a 2-wheeled hand cart for support, ease and safety. Benefits & Perks: Work Life Balance!75% Employer Contribution to Medical, Dental, and Vision insuranceHealth Savings Account with Employer ContributionYear-round Work & Paid TrainingCompany Paid Life, Short-term, and Long-term Disability Insurance401k with generous Company MatchPaid Time Off (PTO) & Holiday PayFlexible Spending & Health Savings AccountEmployee Discounts: Travel, Theme Parks, Home & Auto Insurance and more!Education Reimbursement ProgramPaid employee Referral program What we’re looking for: Position Requirements:High School diploma or equivalentValid Driver's LicenseMust be 21 years of age or olderAbility to pass pre-employment screeningDOT Certification is a plus!1 year of job-related experience in the areas of delivery and installation (preferred) training is providedMechanical & Maintenance Experience/KnowledgeExperience driving box trucksAbility to lift up to 100lbs in a variety of environmental conditions (both weather and non-weather related)Knowledge with computers and smart phone technologyTroubleshootingRoute Driving Experience a plus!Customer ServiceVisit our Careers Website atwww.cscsw.comto learn more about our available opportunities and the benefits of working for CSC ServiceWorks.CSC ServiceWorks is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status.

Overview: Lamb's Tire & Automotive operates multiple locations in the Central Texas area and is expanding! We offer complete quality automotive repair and preventative maintenance. Our ASE certified technicians will be happy to help you on a wide range of services including alignments, brake repair, oil changes, batteries, shocks and struts, belts and hoses, and air conditioning.The Senior Automotive Technician ensures that repairs are performed correctly and efficiently by qualified technicians and that the service department maintains a consistently high level of customer satisfaction. They are also responsible for effectively and efficiently diagnosing and repairing customer vehicles while adhering to the MAP guidelines and in accordance with dealership, manufacturers, and Lamb's Tire & Automotive standards. Pay: 27 - 45 Flag Hours (Competitive Pay Depending on level of and Mechanical Experieince and ASE certifications) Benefits: Competitive Bi-Weekly Pay Tuition Reimbursement Paid Vacation and Sick Time 6 Paid Holidays Medical, Dental and Vision Insurance (Effective 1 st of the Month after Hire) Life Insurance (Company paid) 401(k) Retirement Savings Plan with Company Match Discounted Services on Personal and Immediate Family Vehicles Opportunity for Advancement!!! Principal Duties and Responsibilities: Diagnoses vehicles according to the appropriate level of certifications/experience. Performs complex and heavy-duty repairs. Performs work as outlined on the Multi-point Inspection and/or Repair Order with efficiency and accuracy. Explains technical diagnosis and needed repairs to non-mechanical individuals which may include the Store Manager, Service Consultants and/or customers. Recommends services that are necessary to keep the customer's vehicle in running condition; properly documents all recommendations in customer file. Follows all safety procedures and reports any concerns to the Shop Foreman or Store Manager. Maintains appropriate ASE certifications and renewals of expiring certifications. Qualifications: High School Diploma or equivalent Prefer unexpired ASE or equivalent experience or training Possess valid driver's license, or obtain a valid driver's license within 30 days of hire date Possess State Inspector License or ability to obtain a State Inspector license within 30 days of hire date Ability to work a minimum of five days, including Saturdays Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. #bayard

Overview: Sun Auto Tire & Service operates multiple locations in the Central Texas area and is expanding! We offer complete quality automotive repair and preventative maintenance. Our ASE certified technicians will be happy to help you on a wide range of services including alignments, brake repair, oil changes, batteries, shocks and struts, belts and hoses, and air conditioning.The Senior Automotive Technician ensures that repairs are performed correctly and efficiently by qualified technicians and that the service department maintains a consistently high level of customer satisfaction. They are also responsible for effectively and efficiently diagnosing and repairing customer vehicles while adhering to the MAP guidelines and in accordance with dealership, manufacturers, and Sun Auto Tire & Service standards. Pay: 27 - 45 Flag Hours (Competitive Pay Depending on level of and Mechanical Experieince and ASE certifications) Benefits: Competitive Bi-Weekly Pay Tuition Reimbursement Paid Vacation and Sick Time 6 Paid Holidays Medical, Dental and Vision Insurance (Effective 1 st of the Month after Hire) Life Insurance (Company paid) 401(k) Retirement Savings Plan with Company Match Discounted Services on Personal and Immediate Family Vehicles Opportunity for Advancement!!! Principal Duties and Responsibilities: Diagnoses vehicles according to the appropriate level of certifications/experience. Performs complex and heavy-duty repairs. Performs work as outlined on the Multi-point Inspection and/or Repair Order with efficiency and accuracy. Explains technical diagnosis and needed repairs to non-mechanical individuals which may include the Store Manager, Service Consultants and/or customers. Recommends services that are necessary to keep the customer's vehicle in running condition; properly documents all recommendations in customer file. Follows all safety procedures and reports any concerns to the Shop Foreman or Store Manager. Maintains appropriate ASE certifications and renewals of expiring certifications. Qualifications: High School Diploma or equivalent Prefer unexpired ASE or equivalent experience or training Possess valid driver's license, or obtain a valid driver's license within 30 days of hire date Possess State Inspector License or ability to obtain a State Inspector license within 30 days of hire date Ability to work a minimum of five days, including Saturdays Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationA High School Senior (age 17 or older)*, High school diploma, a GED, or 15 college semester hours *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Overview: Tire Technician – Part-Time – New BraunfelsDiscount Tire1312 N IH 35NEW BRAUNFELS, TX, 78130-2815OverviewThe Tire Technician is the backbone of our success and is the first step in your journey with Discount Tire. Our Tire Technicians repair, install, and maintain tires on cars, trucks, and commercial vehicles. At Discount Tire, we commit to growing our employees and routinely promote from within. Part-Time100% On SitePay Scale From $15$16Starting ImmediatelyAt a Glance:A Part-Time Tire Technician at Discount Tire performs the following duties, including but not limited to:Install new tires and wheelsPerform maintenance on tires, including rotations, balancing, repairs, and cleaningRewarding Career Path to ManagementFollow safety guidelines and best practicesParticipate in hands-on, on-the-job trainingProvide a world-class customer service experienceWhat We’re Looking For:Must have an upbeat outlookMust be dedicated and reliableMust be coachable and trainableMust be able to lift a minimum of 50 lbs.Must enjoy and excel in a team environmentMust be able to function well in a physically demanding environmentWhat We Offer:Discount Tire is committed to supporting our employees. We continually assess our benefit offerings and the needs of our employees to ensure we offer the support our employees need, personally and professionally.Part-Time Benefits:Paid TrainingCompetitive PayWeekly Paychecks401(k) Retirement PlanEmployee Referral BonusEmployee Assistance ProgramEducational Assistance ProgramExclusive Employee Discount ProgramDiscount Tire stands by our Veterans. We are proud to say that we are a Veteran-Friendly organization. Glassdoor names Discount Tire as one of the Best Places to Work in 2018, 2019, 2020, and 2021.Why Discount Tire At Discount Tire, we are dedicated to helping our employees reach their full potential and achieve their career goals. Our comprehensive mentoring program is designed to provide the support, knowledge, and skills needed to succeed and grow within the company. We are committed to promoting from within and investing in the development of our employees. With our strong emphasis on the principles and standards that define who we are as a company, you will have the opportunity to build a lucrative and fulfilling career at Discount Tire. In fact, all our store managers started in our stores and have progressed through the ranks thanks to our commitment to coaching and mentoring our people. Join us and see where your career can take you.Who We Are:In 1960, Bruce T. Halle founded the first Discount Tire in Ann Arbor, Michigan. Starting with an inventory of only six tires, Halle grew his store by cultivating connections to the community and honoring relationships with customers and employees. Through respect, fairness, and a willingness to always pay it forward, Halle transformed his store into a thriving, responsible business.Today, Discount Tire is America’s largest independent tire and wheel retailer. Our 1,100+ locations across 37 states provide a wide range of product choices, affordable pricing, and expert staff. More importantly, all our stores offer the individual customer focus and warm personal touch you’d expect from a neighborhood store. In the spirit of the first Discount Tire store, we maintain commitments to mutual respect and fairness for all through community engagement and responsible growth.Discount Tire continues to prosper because of the vision that lives and thrives in the hearts of our employees, from the store level to the corporate level. Visit one of our stores today and experience the values that make Discount Tire the nation’s most trusted tire and wheel retailer.Learn more about our Company, our culture, and our benefits by visiting careers.discounttire.comDiscount Tire provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Responsibilities: #discounttire21

This position is located at our Georgetown, TX headquarters. Relocation assistance is provided for the right candidate.SUMMARY: Develops and coordinates the design and production of electronic components from inception to completion by performing the following duties.ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Other duties may be assigned.Conducts studies on customer proposals for connector systems.Develops connector systems based on customer input, production specifications, test data and standard engineering practices.Details drawings and coordinates building of prototype product and testing.Uses computer assisted engineering and design software.Responsible for ensuring the final design meets functional and performance specifications.Responsible for ensuring that designs and projects are complete on time and at a reasonable cost.Develops manufacturing process to produce newly designed parts.Designs and details tools for making components or for assembly.Resolves problems related to assigned projects by working with vendor, customers, shop personnel and others as necessary.KNOWLEDGE, SKILLS, AND ABILITIES Requires knowledge typically acquired through,Completion of a Bachelor’s degree from a four year college or university, vocational or technical school,Three to seven years related experience and/or training; or equivalent combination of education and experience.Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.Ability to write reports, business correspondence, and procedure manuals.Ability to effectively present information and respond to questions from groups of managers, clients, and customers.Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.Ability to define problems, collect data, establish facts, and draw valid conclusions.Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.QUALIFICATIONSTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, talk, hear, walk, and use hands to finger, handle, or feel objects, tools, and controls, and reach with arms and hands. The employee may be required to regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, depth perception and the ability to adjust focus.WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee occasionally works near moving mechanical parts and is occasionally exposed to fumes or airborne particles, risk of electrical shock, and vibration. The noise level in the work environment is usually moderate and travel is limited to less than 5%.Sign-On bonus of $5K will be awarded in accordance with our current policy and payable after the first 30 days of employment[Equal Opportunity Employer - Disability/Vet]This job may require applicant to conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. 1157, or (iv) Asylee under 8 U.S.C. 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITARhere.

Fire Alarm Service Technician San Antonio, TX, USA Texas, USAReq #822 Tuesday, June 25, 2024 Established in 2009, Impact Fire Services was the vision of a group of experienced industry professionals that wanted to build a best-in-class fire protection and life safety company. Through superior customer service and technical expertise, we have developed long-standing relationships with the leading businesses in our markets. We are a full-service fire protection company, providing installation, maintenance, inspection, monitoring, and retrofit of fire safety systems. Come join a dynamic team of fire protection professionals, many of whom carry NICET and manufacturer certifications in leading brands. Impact Fire has deep experience supporting many industries including retail, healthcare, education and restaurants. Today, we operate over 30+ district offices and employ over 1,100 employees across multiple states throughout the USA. At Impact Fire Services you can learn a trade with multiple career paths in fire and life safety while benefiting from an employee focused company culture that allows you to gain mentorship and training provided by leading experts at one of the fastest growing companies in the industry. Whether you have transferable skills, prior industry experience, or are looking to start your journey, our apprenticeship programs will give you the support and knowledge you need to go further in your career. Why work with us At Impact Fire, we are a group of hardworking, dedicated fire protection professionals committed to protecting lives and property from fire. Our cohesive team spirit and customer service-oriented culture are expressed in all that we do. We operate with the belief that every team member plays a critical role in our success. We operate in 30+ district office locations across the United States, supporting industries ranging from retail and healthcare to education and restaurants. Please text “ImpactFire” to to connect with Ember, Impact Fire’s Recruiting Assistant, to learn more about this position and the company.Benefits of joining Impact Fire Services When you join Impact Fire you will receive:Competitive compensationCareer Advancement Opportunities Competitive benefits, including healthcare, dental, vision, life insurance, paid time off and holidays Company paid short and long-term disability Immediately vested in our 401(k) company match Exceptional guidance and support from our managers Collaborative culture & environmentRobust training opportunities with company reimbursement upon achieving required licensing Apprenticeship programs for fire sprinkler, fire alarm and inspection positions Opportunity to work alongside some of the best talent in the fire protection industry This position reports to the Fire Alarm Manager or their designated Agent. The Technician will be responsible for providing inspections and service on a variety of fire alarm system devices in a professional and timely manner. The Technician will be expected to meet weekly service and productivity goals. The Technician will work with the Company to obtain local city listing agents. The Technician is also responsible for maintaining a clean, well-organized vehicle and ensuring a safe environment for his/herself, co-workers and customers.Job ResponsibilitiesManage their time to complete the maximum amount of service and inspections while maintaining a high level of quality.Achieve any weekly productivity goals assigned by the Fire Alarm Manager or designated Agent.Learn applicable fire protection codes and obtain applicable state licensing.Protect and maintain company equipment.Work in a safe manner as outlined by company safety procedures including the driving, personal protective equipment, and lockout/tag-out policies.Maintain their vehicle in accordance with company procedures and ensure it is clean and organized.Perform any other tasks assigned by the Fire Alarm Manager or Agent.Job Qualifications:Applicable licensing and certification required by National, State and Local codes.Texas Fire Alarm (FAL) is required.Ability to learn applicable installation, inspection, and servicing codes.Ability to participate in on-call rotation.A strong work ethic and professional appearance.Excellent communications, and customer service skills.Possess a valid driver’s license and driving record that meets company requirements.Preferred QualificationsApplicable experience either in the fire protection industry or the commercial customer service business in some capacity.A fire alarm systems background or a background working as a licensed electrician.Ability and willingness to obtain NICET and other trade specific certifications. Successful completion of a drug test and pre-employment background screening is required. MVR checks are required for all driving positions. We look forward to talking with you about career opportunities with Impact Fire Services. For consideration, please apply on-line.Employment with an Equal Opportunity Employer (EOE) including disability/veterans. Other details Pay TypeHourly

Overview: With over 150 years of experience, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets. Headquartered in Southern California, CoolSys has more than 2,000 highly trained, field-based service and installation experts, serving more than 45,000 customer locations across North America daily . WHAT WE OFFER We are a large company serving many unique customers - because of this, we provide job stability and long-term opportunity for career growth. We invest in our technicians by offering: Ongoing Education & Training Exposure to a Large Variety of Projects Industry-leading Benefit Packages Advanced support and tools designed to improve your workflow Pay from $30 - $45/hour DOE Sign on bonus up to $3,000 DOE Responsibilities: This position is responsible for assisting in the repair and overhaul of equipment, refrigeration, heating, and ventilation equipment to ensure customer needs are met efficiently, accurately, and on time. Provides service to the customer base by repairing and overhauling equipment, such as compressors, water pumps, air handlers, and electrical and mechanical control devices in a safe, efficient, and timely manner that exceeds customers' expectations Provides general repair work on refrigeration, heating, and ventilation equipment, such as air conditioning units, evaporative condensers, ice machine equipment, water pumps, gas furnaces, compressors, and electric motors in a safe and timely manner. Provides preventative maintenance activities for customers by diagnosing equipment malfunction and any operating deficiency of the mechanical equipment to ensure quality work performance for the customer base. Test malfunctioning systems and components using electrical and/or mechanical skills. Maintain legible corporate and personal records of work history. Provides department support by processing job tickets, and work orders to the necessary department promptly. Provide support by picking up, delivering, and installing cases. Perform work on minor construction and remodeling projects including startups of new installations. Drives company vehicle in a safe manner. Performs other related duties and projects as assigned by management. Qualifications: High school diploma/GED. EPA certification. Certification from an accredited vocational-technical or trade school is a plus! Minimum 3+ years of commercial refrigeration experience required. Experience working on refrigeration equipment in convenience stores or supermarkets is a strong plus. Familiarity with single systems and rack systems along with previous work on display cases and walk-in boxes is very helpful. Must have a good driving record and be able to work independently. Emergency on-call availability is a basic requirement. Must be able to lift to 60 lbs. with no assistance and also be able to sit and/or stand for several hours at a time. Join Us: Today, there are 22 different companies that make up the CoolSys family of brands . Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth! Connect with us on Facebook and on Twi t ter . Coolsys is an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics are encouraged to apply. Pre-employment background screening (criminal and MVR ) a nd drug testing (including for marijuana) are required for all positions. Coolsys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.

Build your best future with theJohnson ControlsteamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of theJohnson Controlsfamily and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What we offer:Competitive salary15 days Paid vacation first year plus holidays & sick timeComprehensive benefits package including 401K, pension, medical, dental, and vision careOn the job/cross training opportunitiesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyWhat you will doResponsible for Service customer account Leadership, including Labor and Material growth and execution of the Service business, for the team’s customer base. Drives profitability & productivity of the team. Manages customer relationship development and satisfaction. Responsible for employee development and retention and for safety program compliance.How you will do itSets and monitors goals for customer account gross margin delivery and profitability, including Planned Services Agreements and Labor & Materials (L&M) work.Drives L&M growth through Technicians and Team Leads.Leads the execution efforts of assigned Service business to include warranty-related customer issues.Responsible for procuring and mainlining fleet and tools inventory.Ensures consistency of delivery systems through supervision and audits of Technicians, Customer Service Agent and others who are part of the service delivery process.Reviews and approves all L&M quotations.Responsible for budgeting, forecasting, accountspayables/receivables.Responsible for maintaining appropriate staffing levels to accommodate existing and new business needs, hiring, training and transitioning new employees as well as the day-to-day performance of the service team, conducts formal performance reviews, and all related issues.Responsible for safety performance and program compliance.What we look forRequiredTechnical school training or equivalent experience in HVAC or building controls industry.Three or more years of management experience in a similar service deliverable environment.Strong ability to prioritize work activities for the team, scheduling, and lead a diverse team.Strong interpersonal, customer service, negotiating skills.Demonstrated competence in writing and verbal communication skills.Basic financial accounting experience.Demonstrated proficiency in MS office products and basic Windows environment.PreferredDiploma in Electronic or Mechanical Systems.Two years prior experience in the HVAC or building controls industry.Five plus years in a service management role directing a similar service deliverable teamJohnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

AutoReqId: 19988BR Pay Class: Hourly Hourly Pay Rate: 27.92 HR/DOE Department: Maintenance Line of Business: Aggregates Position Type: Full-Time Job Posting: Heidelberg Materials is seeking a Day ShiftMaintenance Electrician for our Servtex quarry located in New Braunfels, TX . Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. What You'll Get To Do Are you in the market for a job that is Electrifying Heidelberg Materials is seeking a Maintenance Electrician to perform basic corrective, preventive and predictive plant maintenance, and operational field support. Perform electrical repair and maintenance involving disassembly, overhaul, assembly, and adjustments of crushing and screening or mobile equipment componentsPerform electrical repair and maintenance on ready mix concrete and hot mix asphalt plantsMaintain proper tool/parts inventory for specified jobsPerform scale and automation checks for concrete and asphalt plantsProduce accurate estimates and project costsComplete maintenance projects in a timely manner to ensure production goalsMaintain up to date written or data input spreadsheets on all equipment repairsEnsure that all equipment repairs are performed accurately to the manufacturer standardsEnsure compliance with all health, safety, and environmental regulations, as well as company policies and procedures; assist with physical inspections of plant property/departments and immediate reporting of unsafe conditions and/or accidents What We Are Looking For High school diploma or GED requiredCompletion of an apprenticeship program or certification strongly preferredPrefer 2 years prior maintenance experience with an emphasis on electrical workSome welding experience desiredOpen pit mining operations and aggregate products experience a plus.MSHA Part 48 training a plusPhysical Requirements: sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below shoulder, work extended periods of time in same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 75 lbs., work in confined spaces, capable of wearing respiratory and other personal protective equipment No search firms please Heidelberg Materials is a drug free workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Dominium is helping tackle the affordable housing crisis – and we’re looking for motivated candidates to join our team and help further our mission. With offices in Minneapolis, Atlanta, Dallas and Phoenix, Dominium is one of the nation’s most respected and innovative affordable housing development and management companies. We create quality, affordable homes and engage with our residents daily to create a strong sense of community and connectivity. Join us in making a difference in people’s lives every day at a company where you can challenge yourself to develop both personally and professionally. We are currently seeking a Lead Maintenance Technician to join our team at The Springs, a 76 unit apartment community in Dripping Springs, TX. Position Summary: As a Lead Maintenance Technician, you will be responsible for the general appearance and maintenance of the property to help create a great living experience for our residents. Responsibilities: Monitor property for any repairs or replacements that may ariseComplete work requests for common areas and apartment unitsPerform preventative maintenance on propertyAssess and repair appliances as neededAssist in preparing vacant units ready for new residentsSupervise site maintenance personnel and other staff as assignedOccasional on-call duties(trip stipend provided if called back to site after regular work hours)Create and maintain a safe work environment Qualifications: 2 - 3 years previous experience in maintenance preferredDemonstrated proficiency in carpentry, plumbing, electrical systems, and general repairHVAC and EPA experience preferredCPO certification preferredValid drivers' license and insurance may be required About Us:Dominium is one of the leading affordable housing development and property management companies nationwide. We operate in approximately 20 states and employ over 1,200 employees. For 50 years, we have offered excellence to the development and management of affordable housing communities across the United States. Dominium’s values – creating long-term value, developing people, integrity, and growth – are built upon our company’s mission and vision. We offer a competitive salary, incentive bonus program, training and development programs, career growth opportunities and community volunteer and outreach programs. We also offer a comprehensive benefits package for eligible employees including Medical, Dental, Life & Disability, Paid Time Off, 401(K), Flexible Spending Accounts, Employee Recognition & Wellness Programs. Dominium is committed to a diverse and inclusive workplace. Dominium is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.

**SkillBridge Candidates Only**Build an Aviation Career You're Proud OfAt StandardAero, we use our ingenuity and know-how to find solutions for the simple to the most complex challenges in Aviation. Together, we get the job done and done well. At our new San Antonio Training Center, you will be trained by the world's best. Bring your mechanical aptitude, a strong work-ethic, and a hunger for learning - we'll teach you the rest.What's it like at StandardAeroCollaboration, teamwork, and having each other's backs are the norm here. Our growth in this expanding industry means getting career stability and opportunities to grow. With great resources, an inclusive atmosphere, and a culture based on shared values, we'll support you in building a solid career with a team you can count on.Our Turbine Engine Mechanic Training Program is a 12 week comprehensive paid training program that provides format, structure and standards for employee training & development. We have a 'learn-by-doing' philosophy so you will be frequently moving between theory, lab and instructor led practical on-engine training.Upon completion of the program, you will be assigned to one of our engine programs in San Antonio.What you'll learn:Repair and overhaul of gas turbine engines Inspection of engine modules and engine components Safety practices and aviation regulations Requirements for the ideal candidate include:High School Diploma or equivalent education. Minimum of 2 years job related training/experience is preferred. Ability to read, write, and communicate verbally in English.Ability to read and interpret manuals, technical drawings, and blueprints to determine proper operating conditions. Ability to lift up to 50lbs without assistance.Ability to stand for extended periods of time.Ability to multitask and prioritize tasks in a high pace environment.SkillBridge Specific Information: This is an unpaid fellowship through the Department of Defense (DoD) SkillBridge Program. The fellow selected for this role will not receive compensation or benefits from StandardAero and will not be an employee, agent, or contractor of StandardAero but rather will remain an employee of the DoD and will receive compensation and benefits through the DoD.DoD SkillBridge Eligibility Requirements: Has served at least 180 days on active dutyCan participate within the last 6 months of separation or retirementWill receive an honorable dischargeHas taken any service TAP/TGPSHas attended or participated in an ethics brief within the last 12 monthsReceived Unit Commander (first O-4/Field Grade commander in chain of command) written authorization and approval to participate in DoD SkillBridge Program prior to start of the fellowship.What makes a good fit for StandardAeroWe love people who take pride in their work and being collaborative with their team. We work together and support each other. We're very team oriented too and that is greatly valued. We also believe in getting the job done, whatever it takes and that's a work-ethic that is often hard to describe. We love that too -it's what makes us great partners and teammates to each other. We are respectful of each other and who we are, and welcome people from all walks of life and give everyone open access to learn and build skills. If this sounds like a great fit for you, we hope you apply and join us.Inclusivity Is Our StandardStandardAero offers equal employment opportunities for all. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to be who you are and experience our welcoming culture.Raising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.About UsRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture.

The CSC ServiceWorks Story: We’re the leading provider of commercial laundry services, consumer services technology, and air-vending and EV solutions throughout the United States and Canada.Our Best-in-Class team of 2,500 dedicated professionals’ benefit from work that’s steady (but never boring), time to enjoy what matters, appreciation and rewards in return for hard work and accountability, and support in growing a fulfilling career. Overview: Appliance Service TechnicianAre you a problem-solver who loves to be out in the field Our Appliance Techs provide mechanical repairs to washers and dryers at customer and client locations within their assigned region. Appliance Technicians keep our machines running smoothly to meet customer expectations or the need for repeated service needs. The ideal candidate is someone who enjoys working independently and has a very strong mechanical aptitude.Key Responsibilities:Service and Repair: Perform diagnosis, troubleshooting, and repair of appliances such as washing machines, dryers, and air-vending machines. Ensure that all repairs are carried out efficiently and in accordance with manufacturer guidelines and safety standards.Maintenance: Conduct routine maintenance and preventative services on appliances to ensure optimal performance and extend their lifespan. This includes cleaning, lubricating, replacing worn-out parts, and adjusting settings as necessary.Customer Service: Interact with customers in a professional and friendly manner, addressing their concerns and providing accurate information regarding the repair or maintenance process. Offer advice and recommendations on appliance usage, care, and maintenance to prevent future issues.Documentation: Maintain detailed records of service calls, repairs performed, parts used, and any other relevant information. Prepare service reports and update the internal database with accurate and up-to-date information.Parts and Inventory Management: Monitor and manage inventory levels of spare parts and tools. Order necessary parts and equipment to ensure the availability of required resources for efficient repairs and maintenance.Safety Compliance: Adhere to all safety protocols and guidelines while working with electrical systems and appliances. Ensure personal safety and the safety of customers' property during service calls. Benefits & Perks: Work Life Balance!75% Employer Contribution to Medical, Dental, and Vision insuranceHealth Savings Account with Employer ContributionYear-round Work & Paid TrainingCompany Paid Life, Short-term, and Long-term Disability Insurance401k with generous Company MatchPaid Time Off (PTO) & Holiday PayFlexible Spending & Health Savings AccountEmployee Discounts: Travel, Theme Parks, Home & Auto Insurance and more!Education Reimbursement ProgramPaid employee Referral program What we’re looking for: Valid Driver's LicenseAbility to pass pre-employment screeningPrevious experience in appliance repair or a related field is preferred.Good interpersonal and communication skills to interact with customers effectively.Ability to work independently and manage time efficiently.Physical stamina and dexterity to handle and maneuver heavy appliances.Basic computer skills for documentation and communication purposes.Must be able to lift up to 75 pounds and will frequently work in a variety of environmental conditions (both weather and non-weather related)Visit our Careers Website atwww.cscsw.comto learn more about our available opportunities and the benefits of working for CSC ServiceWorks.CSC ServiceWorks is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status.

Overview: Lamb's Tire & Automotive operates multiple locations in the Central Texas area and is expanding! We offer complete quality automotive repair and preventative maintenance. Our ASE certified technicians will be happy to help you on a wide range of services including alignments, brake repair, oil changes, batteries, shocks and struts, belts and hoses, and air conditioning.The Senior Automotive Technician ensures that repairs are performed correctly and efficiently by qualified technicians and that the service department maintains a consistently high level of customer satisfaction. They are also responsible for effectively and efficiently diagnosing and repairing customer vehicles while adhering to the MAP guidelines and in accordance with dealership, manufacturers, and Lamb's Tire & Automotive standards. Pay: 27 - 45 Flag Hours (Competitive Pay Depending on level of and Mechanical Experieince and ASE certifications) Benefits: Competitive Bi-Weekly Pay Tuition Reimbursement Paid Vacation and Sick Time 6 Paid Holidays Medical, Dental and Vision Insurance (Effective 1 st of the Month after Hire) Life Insurance (Company paid) 401(k) Retirement Savings Plan with Company Match Discounted Services on Personal and Immediate Family Vehicles Opportunity for Advancement!!! Principal Duties and Responsibilities: Diagnoses vehicles according to the appropriate level of certifications/experience. Performs complex and heavy-duty repairs. Performs work as outlined on the Multi-point Inspection and/or Repair Order with efficiency and accuracy. Explains technical diagnosis and needed repairs to non-mechanical individuals which may include the Store Manager, Service Consultants and/or customers. Recommends services that are necessary to keep the customer's vehicle in running condition; properly documents all recommendations in customer file. Follows all safety procedures and reports any concerns to the Shop Foreman or Store Manager. Maintains appropriate ASE certifications and renewals of expiring certifications. Qualifications: High School Diploma or equivalent Prefer unexpired ASE or equivalent experience or training Possess valid driver's license, or obtain a valid driver's license within 30 days of hire date Possess State Inspector License or ability to obtain a State Inspector license within 30 days of hire date Ability to work a minimum of five days, including Saturdays Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. #bayard

KEEPING SPECIALIZED AIRCRAFT AIRBORNEThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationA High School Senior (age 17 or older)*, High school diploma, a GED, or 15 college semester hours *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Overview: Tire Technician – Part-Time – Ben WhiteDiscount Tire1411 W BEN WHITE BLVDAUSTIN, TX, 78704-7603OverviewThe Tire Technician is the backbone of our success and is the first step in your journey with Discount Tire. Our Tire Technicians repair, install, and maintain tires on cars, trucks, and commercial vehicles. At Discount Tire, we commit to growing our employees and routinely promote from within. Part-Time100% On SitePay Scale From $16$17Starting ImmediatelyAt a Glance:A Part-Time Tire Technician at Discount Tire performs the following duties, including but not limited to:Install new tires and wheelsPerform maintenance on tires, including rotations, balancing, repairs, and cleaningRewarding Career Path to ManagementFollow safety guidelines and best practicesParticipate in hands-on, on-the-job trainingProvide a world-class customer service experienceWhat We’re Looking For:Must have an upbeat outlookMust be dedicated and reliableMust be coachable and trainableMust be able to lift a minimum of 50 lbs.Must enjoy and excel in a team environmentMust be able to function well in a physically demanding environmentWhat We Offer:Discount Tire is committed to supporting our employees. We continually assess our benefit offerings and the needs of our employees to ensure we offer the support our employees need, personally and professionally.Part-Time Benefits:Paid TrainingCompetitive PayWeekly Paychecks401(k) Retirement PlanEmployee Referral BonusEmployee Assistance ProgramEducational Assistance ProgramExclusive Employee Discount ProgramDiscount Tire stands by our Veterans. We are proud to say that we are a Veteran-Friendly organization. Glassdoor names Discount Tire as one of the Best Places to Work in 2018, 2019, 2020, and 2021.Why Discount Tire At Discount Tire, we are dedicated to helping our employees reach their full potential and achieve their career goals. Our comprehensive mentoring program is designed to provide the support, knowledge, and skills needed to succeed and grow within the company. We are committed to promoting from within and investing in the development of our employees. With our strong emphasis on the principles and standards that define who we are as a company, you will have the opportunity to build a lucrative and fulfilling career at Discount Tire. In fact, all our store managers started in our stores and have progressed through the ranks thanks to our commitment to coaching and mentoring our people. Join us and see where your career can take you.Who We Are:In 1960, Bruce T. Halle founded the first Discount Tire in Ann Arbor, Michigan. Starting with an inventory of only six tires, Halle grew his store by cultivating connections to the community and honoring relationships with customers and employees. Through respect, fairness, and a willingness to always pay it forward, Halle transformed his store into a thriving, responsible business.Today, Discount Tire is America’s largest independent tire and wheel retailer. Our 1,100+ locations across 37 states provide a wide range of product choices, affordable pricing, and expert staff. More importantly, all our stores offer the individual customer focus and warm personal touch you’d expect from a neighborhood store. In the spirit of the first Discount Tire store, we maintain commitments to mutual respect and fairness for all through community engagement and responsible growth.Discount Tire continues to prosper because of the vision that lives and thrives in the hearts of our employees, from the store level to the corporate level. Visit one of our stores today and experience the values that make Discount Tire the nation’s most trusted tire and wheel retailer.Learn more about our Company, our culture, and our benefits by visiting careers.discounttire.comDiscount Tire provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Responsibilities: #discounttire21

Job DescriptionUnleash your potential with the Johnson Controls team!As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!What you will doWe are looking for a skilled Journeymen Chiller Mechanic who has worked in commercial, industrial, and/or institutional markets to join our team. Candidates should have a minimum of five years’ chiller experience, with knowledge of maintenance procedures, troubleshooting, and rebuilds of medium-large tonnage chillers of all brands.How you will do itYou will be assigned primary service accounts and responsibility for executing contract maintenance visits, inspections, site assessments, service requests and recommending necessary upgrades or repairs in order to prolong the equipment life cycle of our customers equipment.You will establish & maintain a positive relationship with customers, vendors and co-workers through effective oral and written communication skills via phone, computer, and face to face.You will be expected to provide quote estimates for labor & material repairs and upgrades as needed.You will represent the company by serving as the direct customer contact and be responsible for servicing products and equipment on assigned projects, ensuring customer satisfaction by identifying, analyzing, diagnosing and repairing equipment and systems at customer’s location.You will be required to use cutting-edge software and technology, along with a variety of hand-tools, rigging equipment, following blueprints or engineering specifications, to diagnose and repair equipment.You will be expected to continually enforce safety to the highest standards and maintain security and accountability of company issued and procured assets by recording use, wear and conditions.You will be expected to work as part of a team who is dedicated to delivering the highest standard of service to all its customers which may require the flexibility to work overtime and weekends as the business requires, including occasional overnight stays.You will be added to our on-call rotations, since we are a 24/7 service company.What we look forRequiredThree years of commercial, industrial, and/or institutional experience with all types of chillers, various compressor technologies, chiller control systems, and speed drives.Requires Mechanical Journeyman status.Member of Local Union 286 or willing to join.Operating knowledge of Microsoft Office software and working proficiency with handheld computers (i.e. smartphones, iPads).Adherence to company safety program.Valid driver's license.Appropriate licenses to work with refrigerant, boiler, and steam operational & service knowledge.EPA Universal Refrigerant Certification.Good verbal and written communication skills.Must be able to be on call nights and weekends on a schedule-rotating basis.PreferredMore than 5 years of commercial, industrial, and/or institutional experience with all types of chillers, various compressor technologies, chiller control systems, and speed drives.**This is a Bargaining Unit Position.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.