Please Accept our Privacy Policy
Fort Point
Houston, TX 77001 • (38.4 miles) • Full Time • 11/17/2026
Senior Project Engineer – Onshore Wellhead, Gathering & EOR Facilities Location: Hybrid (Houston Area Home Office + Remote/Field Locations across North America) About the Role We are seeking an experienced Senior Project Engineer with deep onshore wellhead and surface facility expertise to lead the full-lifecycle delivery of oilfield infrastructure. Supporting unconventional oil development and Enhanced Oil Recovery (EOR) programs across North America, you will bridge the gap between subsurface/completions teams and home-office engineering. In this high-impact role, you will direct the design, construction, and commissioning of wellhead tie-ins, production batteries, gathering systems, high-rate water transfer, and CO2/N2/Steam EOR injection facilities. You will ensure every well pad and cAlsco Inc
Houston, TX 77047 • (41.9 miles) • Full Time • $14.00 / hr • 11/17/2026
Classification : Non-exempt The Load Builder receives finished products from production departments and organizes them into route carts or bins for delivery or storage. You will assemble customer orders for shipment as part of the production and distribution team. The Load-Builder reports to the Production Manager. You Will: Receive finished, cleaned products from production departments and organize them for order assembly. Review packing requirements and place correct products into designated route carts, bins, or storage locations. Maintain product flow in the load-building area to support delivery schedules. Identify and report product shortages, discrepancies, or quality concerns to management. Meet established productivity, quality, and safety standards, including proper use of PersonDeer Park Refining Limited Partnership
Deer Park, TX 77536 • (43.5 miles) • Full Time • 11/17/2026
Job Summary The Non-Routine Maintenance (NRM) Planner develops and coordinates work plans for non-routine maintenance activities that support safe, reliable, and efficient plant operations. Responsibilities include scope development, estimating, scheduling, resource planning, and execution readiness for outages, pit stops, ASM events, reliability improvements, and capital-funded work. The position typically manages $5 million to $15 million of annual work scope. ACCOUNTABILITY & RESPONSIBILITIES: Work Planning & Preparation Develop comprehensive work packages for non-routine maintenance activities, operational outages, pit stops, ASM events, reliability improvements, and capital- supported work. Define job scope through field verification, stakeholder engagement, and review of technical doMcDaniel Metals LLC
Houston, TX 77064 • (19.1 miles) • Full Time • $16.00 to $17.00 / hr • 11/16/2026
Department: Manufacturing / Production Location: Houston, TX Reports To: Production Supervisor / Production Manager FLSA Status: Non-Exempt Job Type: Full-Time Position Summary McDaniel Metals is seeking an experienced Assembly Lead to provide hands-on leadership within our manufacturing operations. This position is responsible for coordinating daily assembly activities, supporting and directing production employees, and ensuring customer orders are assembled safely, accurately, and on schedule . We are looking for someone with previous manufacturing or production experience , preferably within HVAC, sheet metal fabrication, mechanical assembly, or a similar industrial environment. The ideal candidate is a hands-on leader who understands production workflow, can read and follow work ordersService Robot Co.
Houston, TX • (30.1 miles) • Full Time • $25.00 to $55.00 / hr • 11/16/2026
Houston, Texas | Field work | Contract, paid per work order | $25 to $55 per hour About Service Robot Co. Service Robot Co. helps businesses across all 50 states choose, deploy and maintain commercial robots, with 24/7 support. We supply all types of robots for all types of automation. We handle site assessments, robot selection, installation, system integration and team training. Purchase, financing and rental options are available, backed by ongoing maintenance and repairs. One partner from your first consultation through everyday operation. About the role As a Contract Robot Technician, you are our person on site. You install, maintain and repair commercial robots at customer locations, and a remote specialist supports you on every job. This is hands-on, safety-focused work at sites thaALTEN Technology USA
Houston, TX • (30.1 miles) • Full Time • 11/16/2026
We're ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life-from advancing space exploration and life-saving medical devices to building autonomous electric vehicles. With 3,000+ experts across North America, we partner with leading companies in aerospace, medical devices, robotics, automotive, commercial vehicles, EVs, rail, and more. As part of the global ALTEN Group-57,000+ engineers in 30 countries-we deliver across the entire product development cycle, from consulting to full project outsourcing. When you join ALTEN Technology USA, you'll collaborate on some of the world's toughest engineering challenges, supported by mentorship, career growth opportunities, and comprehensive benefits. We take pride in fostering a culture where employees feelDFBooking Careers
Houston, TX • (30.1 miles) • Full Time • 11/16/2026
This is a high-impact role where your leadership and problem-solving skills will directly contribute to operational reliability, safety, and strategic growth. Your work will challenge you, and with our Core Values to guide you, you'll quickly learn and grow with us. Responsibilities/Expectations: Leads the design, implementation, and optimization of electrical systems and power distribution networks supporting critical infrastructure such as pipelines, compressor stations, and storage facilities Champions the integration of advanced technologies including automation, real-time monitoring, and energy storage to enhance system performance and reduce operational costs Implements robust safety measures such as arc flash mitigation and fault detection systems to protect personnel and ensure infAutumn Mechanical
Houston, TX • (30.1 miles) • Full Time • $28.00 to $35.00 / hr • 11/16/2026
Commercial HVAC & Refrigeration Service Technician Immediate Openings | Competitive Pay | Full Benefits | Company Truck Autumn Mechanical, Inc. is growing, and we're looking for experienced HVAC & Refrigeration Service Technicians to join our team! Are you a skilled technician looking for steady work, competitive compensation, and a company that recognizes your experience and rewards your hard work? At Autumn Mechanical, we value dependable, knowledgeable technicians who take pride in their workmanship. We offer a high volume of service work, a comprehensive benefits package, and the tools and support you need to succeed. What We Offer Competitive Pay – Compensation based on experience, skills, and qualifications. Full Benefits Package – Comprehensive employee benefits. Company-Provided SeDXP
Katy, TX • (33.2 miles) • Full Time • 11/16/2026
Do you want to grow with us?At DXP we arepassionateabout what we do and driven to be the best solution for our industrial customers. Since 1908 DXP has been dedicated to thehighest qualityof customer service through our expertise of the products we distribute and the technical services we perform with a sense of individual pride and company spirit. Throughout your career with DXP, we willencourageandempoweryou to take an active role in identifying and driving your development, so you feel total confidence in your ability to achieve ongoing success. We aspire to be thebest solutionfor the Industrial customers' needs for MROP products and services through our Innovative Pumping Solutions, Metal Working, Supply Chain Services and Service Centers. Check out our many videos to learn more! -us/cVallourec Star LP
Houston, TX 77049 • (34.7 miles) • Full Time • 11/16/2026
Why Join Us At Vallourec, we are seeking individuals whose passion and dedication match the strength and resilience of the steel we produce. This technician will perform metallurgical laboratory activities associated with the preparation and testing of tubular product samples. Safely operates laboratory equipment and machinery to collect, prepare and test specimens in accordance with API, ASTM, ISO, customer and company requirements. Ensures accurate identification, traceability, documentation and reporting of test results while maintaining a safe, clean and organized laboratory environment. Your Day-to-Day Impact You’ll play a vital role in our Quality team by: Work safely and comply with all company safety policies, procedures and applicable regulatory requirements. Collect, identify andSteelcon Inc
Houston, TX 77032 • (20.3 miles) • Full Time • 11/16/2026
Are you the person who spots what others overlook? SteelCon Inc. in Houston, TX is searching for a full-time Quality Control Manager - Structural Steel Fitter to bring precision, accountability, and confidence to every project before it hits the shop floor. If you take pride in getting the details right the first time, this is your opportunity. Apply today and make your mark! At SteelCon, your skillset directly impacts the success of every project we take on. You'll work in a fast-paced, team-driven environment where your attention to detail truly matters. We offer competitive pay of $28.00-$32.00 per hour , and a strong benefits package that includes PTO, health insurance, dental, vision, a 401(k), and company parties that bring our team together . Here, your expertise is valued, your groSMA America
Houston, TX • (30.1 miles) • Full Time • 11/16/2026
Why Work at SMA America Power the future. Build your career at SMA America. As the U.S. subsidiary of SMA Solar Technology AG, we have been at the forefront of solar inverter technology since 1981, developing solutions that make photovoltaic power plants simpler, more reliable, safer, and more cost effective. Headquartered in Rocklin, California, SMA America has spent more than two decades helping homes, businesses, and utilities across the country generate clean, reliable power. We are the only inverter manufacturer in the world offering solutions for every system size, from residential rooftops to large scale utility plants, backed by more than 1,500 patents and a presence in over 190 countries. Innovation is only part of the story. We invest in our people, create room to grow, challengeDELTA360
Houston, TX 77015 • (37.4 miles) • Full Time • 11/16/2026
Description: The Industrial Sales Manager is responsible for leading and executing the overall sales strategy for the Industrial segment, driving revenue growth, profitability, and market expansion. This role oversees key customer relationships, develops high-performing sales teams, and ensures alignment between sales, technical services, and vendor partners. The Director serves as a strategic leader and solution provider, focused on delivering long-term value to customers while strengthening the company’s position in the industrial marketplace. Compensation Base salary plus performance-based bonus/incentive compensation. Additional benefits include vehicle allowance, fuel card, cell phone, computer, safety equipment, and standard company benefits. Key Responsibilities Develop and executeExtendMyTeam
Houston, TX 77092 • (25.8 miles) • Full Time • 11/15/2026
We are looking for a hands-on Maintenance & Engineering Manager to lead our maintenance, equipment reliability, and manufacturing engineering functions. You will own equipment problems end to end on the floor, work them with Manufacturing with urgency, and walk the floor daily to catch issues before they cause downtime. This is a working leadership role. You will troubleshoot PLC programs and fault codes, read electrical and mechanical schematics, and work electrical, mechanical, and pneumatic problems yourself, not only through a vendor. You will also build a proactive preventative maintenance and equipment reliability program, and develop a skilled, accountable maintenance team. What You Will Do Lead the maintenance team and own the preventative maintenance strategy, PM schedules, assetViking Engineering, LC
Houston, TX 77079 • (29.5 miles) • Full Time • 11/15/2026
Job Summary: The Senior Process & Facilities Engineer will provide advanced technical expertise and engineering support to various projects within a multidisciplinary team. This role is responsible for evaluating complex process and facilities systems, resolving technical challenges, and providing guidance to ensure project objectives, operational efficiency, and safety requirements are met. Experience & Education: Bachelor's degree in Engineering required, preferably in Chemical or Process Engineering; advanced degree in Engineering or a related field preferred. Minimum of 15 years of relevant industry experience, including 10 years in process and facilities engineering. Proficiency in process simulation software (e.g., PRO/II, UniSim, HYSYS, Aspen Plus). Extensive process engineering expVeyra
Houston, TX 77073-1178 • (30.1 miles) • Full Time • 11/15/2026
Description: Design Systems That Make a Difference Advanced Equipment and Services, Inc., a Veyra company, is looking for an AutoCAD Plant 3D Designer to join our engineering and manufacturing team in Houston. In this role, you will transform process concepts into accurate, buildable 3D models and production drawings for water treatment equipment and containerized systems. You will collaborate closely with project engineers, vendors, and fabrication professionals throughout the project lifecycle, from initial layouts and design reviews through fabrication, testing, shipment, and final as-built documentation. If you enjoy technical design, hands-on problem-solving, and seeing your work move from a digital model to a finished system, this position offers an opportunity to make a visible impaQuest Global
Houston, TX • (30.1 miles) • Full Time • $68,000 to $82,000 / yr • 11/15/2026
Job Description The achievers and courageous challenge-crushers we seek, have the following characteristics and skills: What You will Do: Develop the detailed mechanical design of rotating equipment packages, taking inputs from core machinery and systems design. Design structural steel baseplates and release drawings and bills of materials for fabrication and machining. Conduct calculations for static and dynamic loading at foundation interface. Develop overall general arrangement drawings for entire rotating equipment trains and supporting auxiliaries. Create detailed piping models, pipe spool fabrication drawings, and design associated piping supports. Conduct detailed design of coupling guards along with fabrication and machining drawings. Manage the 3D models of rotating equipment traiEnpro
Houston, TX • (30.1 miles) • Full Time • 11/15/2026
QUALITY MANAGER OPPORTUNITY To support continued growth, increased regulatory complexity, and heightened customer expectations, AlpHa Measurement Solutions has established the Quality Manager role. This position provides company-wide leadership of the Quality Management System (QMS), regulatory and compliance programs, and the Quality Assurance team. The role provides independent oversight of product and process quality while partnering with the Product Testing function, which remains operationally managed outside the Quality organization. Reports to: Vice President of Engineering Direct Reports: Quality Assurance Team Functional Leadership: Quality Management System; Regulatory, Compliance, and Certification Programs WHAT MAKES ALPHA MEASUREMENT SOLUTIONS SPECIAL At AlpHa Measurement SoluProconex
Houston, TX • (30.1 miles) • Full Time • 11/15/2026
Proconex is the exclusive Emerson Impact Partner for Emerson Automation Solutions in the Mid-Atlantic region. We provide a full portfolio of Process Automation Control Systems, Valves and Control Devices, and related technologies and services to a range of customers-in the Life Sciences, Chemical, Power, Refining, Oil & Gas, Food & Beverage, Paper, Metals, and other industries, as well as commercial enterprises and campus facilities. With three strategically located offices, Proconex maintains a deep dedication to its 200+ employees, a sharp focus on safety and quality, and the drive to deliver. Proconex is seeking a Systems Engineer with expertise in Ignition SCADA and industrial automation systems to support, develop, and enhance manufacturing automation solutions for our customers. ThisPrimoris Pipeline, Inc.
Houston, TX 77041 • (23.4 miles) • Full Time • 11/15/2026
Primoris Pipeline is currently seeking a Process Engineer (Mid-level, Intermediate, or Senior-level) for our office in Houston, Texas, which focuses on onshore oil & gas transportation projects in the upstream, midstream, and petrochemical markets. Our core focus is Facilities and Pipelines, including Pump Stations, Compressor Stations, CO2 Capture Facilities, Tank Farms, Terminals (Loading/Unloading Truck, Rail, Marine), Pipeline Facilities (Traps, valve sites, meter sites, tie-ins, etc.), Upstream production pads, gathering pipelines and tank batteries. Job Responsibilities: Develop the Process Basis of Design Prepare Heat and Material Balance for the project Process Flow and P&ID Development Prepare the Line List PSV/relief calculations Flare Study Hydraulic Simulation and Surge AnalysiEntrion Inc
Houston, TX 77024 • (29.7 miles) • Full Time • $100.00 to $120.00 / hr • 11/15/2026
We’re looking for consultant – MPD Project Engineer | Houston, TX We are seeking an experienced Managed Pressure Drilling (MPD) Engineer for a project-based subcontractor position located in Houston, Texas . Key Responsibilities: Support MPD project engineering, planning, and execution. Perform MPD hydraulics, ECD/ESD, SBP, surge/swab, and operational simulations. Develop MPD programs, operating matrices, procedures, and technical documentation. Review MPD equipment requirements, P&IDs, and system configurations. Participate in client meetings, technical reviews, risk assessments, and project planning. Provide technical support and troubleshooting during project execution. Requirements: Engineering degree (Petroleum, Mechanical, or related discipline). 5+ years of drilling/MPD experience.J.Riley Recruitment
Houston, TX • (30.1 miles) • Full Time • 11/15/2026
Position Overview Our client is seeking an experienced Electrical Engineer to support the design, manufacturing, testing, and continuous improvement of electrical systems and industrial control equipment. This position combines electrical engineering expertise with hands-on manufacturing support, working closely with production, quality, operations, and technical teams to deliver reliable, high-performing equipment for industrial applications. The ideal candidate brings a strong background in electrical engineering within a manufacturing environment, including electrical system design, industrial controls, automation, and production support. This role is particularly well suited to an engineer who enjoys working beyond the design phase, solving technical challenges on the manufacturing floSolid Rock Recruiting LLC
Houston, TX • (30.1 miles) • Full Time • $150,000 to $185,000 / yr • 11/15/2026
Senior Mechanical Project Manager (Traveling) Nationwide Projects | Full-Time Travel Required Confidential Opportunity – Partnered with a Leading Mechanical Contractor We are partnered with a reputable, national mechanical contractor seeking a Traveling Senior Project Manager to lead large-scale HVAC and mechanical construction projects across the U.S. About the Role As a Senior Project Manager, you will lead projects from preconstruction through closeout, ensuring safety, quality, budget, and schedule are consistently achieved. This is a high-impact role for someone who thrives in dynamic environments and enjoys working on diverse, complex projects Key Responsibilities Lead and enforce jobsite safety and compliance culture Manage scope, schedule, and field resources Oversee procurement anBlack & Veatch
Houston, TX • (30.1 miles) • Full Time • 11/15/2026
In this role, you will have the opportunity to: Function as a technical subject matter expert and specialist. Develop protective setpoints per industry standards, best practices and client requirements. Work with system modeling software programs (ASPEN, CAPE, CYME, ETAP, SKM). Develop downloadable setpoint files on multiple propietary relay manufacturer software platforms (SEL AcSELerator Quickset, GE Enervista, etc.). Develop and manipulate logic commonly utilized in protection and control schemes. Multiple locations available! Please refer to job posting header for full list of eligible locations. Key Responsibilities Proactively provides guidance and direction on department design guides, standards, systems, applicable engineering codes and policies. May own, maintain, update, or develAll About Personnel
Houston, TX • (30.1 miles) • Full Time • 11/15/2026
Position Summary The CNC Machine Operator is responsible for safely and efficiently operating CNC machinery to produce parts according to established specifications, production requirements, and quality standards. This position requires attention to detail, the ability to read production documents and blueprints, experience using precision measuring tools, and a strong commitment to safety and quality. Key Responsibilities Operate CNC machines safely and efficiently according to production requirements. Set up, load, and unload materials and finished parts from CNC machinery. Monitor equipment during operation and make basic machine adjustments as needed. Read and interpret blueprints, drawings, work orders, and production instructions. Use precision measuring tools, including calipers, miThermal Engineering International
Houston, TX 77042 • (31.7 miles) • Full Time • 11/15/2026
Thermal Engineering International (USA) Inc. is seeking a highly skilled and motivated Sr. Design Engineer to join our dynamic team. In this essential position, you will be tasked with assessing customer specifications, conducting mechanical design calculations and related analyses (including numerical analysis/FEA), preparing, verifying, and/or reviewing manufacturing drawings, as well as documenting, presenting, and updating of these activities to others as required. Your expertise will be crucial in the development of standards to facilitate the thermal and mechanical design and drafting of various types of heat exchangers for the ASME Section III Program. At TEI we value creativity, collaboration, and commitment to excellence, making this an exciting opportunity for a seasoned engineerCity Of Pasadena
Pasadena, TX 77506 • (39.5 miles) • Full Time • 11/15/2026
Duties: The Food Inspector performs entry-level environmental sanitation inspection work. Work involves inspecting various buildings and establishments for proper sanitation and preparing reports of findings. Works under close supervision with minimal latitude for the use of initiative and independent judgment. Inspect food establishments, institutions, schools and related establishments for proper sanitation and compliance with applicable local, state and federal codes. Investigate food related complaints and prepare reports of findings and recommendations. Conduct investigations of public health nuisance complaints and secure correction and abatement of established violations. Prepare reports on inspection findings, outline violations of regulations and recommends corrective action. PromAccenture Construct
The Woodlands, TX • (2.6 miles) • Full Time • $150,000 to $190,000 / yr • 11/14/2026
You've Never Been Satisfied with "Good Enough." You didn't get into this to manage one piece of a project. You got into it to change how the world gets built. At Accenture Construct, that's the job. You'll help deliver the data centers, power grids, rail networks, factories and public infrastructure that keep communities moving - smarter, safer and more sustainably. You'll work alongside people who think big and act bold: project managers, engineers, technologists and strategists who pair real-world delivery with AI. And you won't be handed a slice of it. We take on whole programs, from early strategy through construction and handover, and we stand behind how they land. Because “good enough” builds the past. You're here to build what's next. Visit us here to learn more about Accenture ConsPanelmatic
Conroe, TX • (9.4 miles) • Full Time • 11/14/2026
About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-CoolSys
Houston, TX 77069 • (14.8 miles) • Full Time • 11/14/2026
Overview WHY COOLSYS? At CoolSys, we offer more than just a job-we provide stability, growth, and industry-leading benefits for our employees. No wonder Newsweek named CoolSys one of America’s Greatest Workplaces! As a large company serving diverse customers, we invest in our team with: Competitive Compensation: $35.00- $50.00 hr. DOE Sign On Bonus: Up to $5,000.00 DOE Ongoing Education & Training: Access to state-of-the-art facilities and paid online training. Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match. Enroll in Medical Coverage Starting at $0 Per Paycheck Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learninVAM USA
Houston, TX 77073 • (16.5 miles) • Full Time • 11/14/2026
Make an Impact With Us At Vallourec, we are seeking individuals whose passion and dedication match the strength and resilience of the steel we produce. As a Process Engineer, Threading & Services, you will drive process improvement, quality, safety, and operational excellence by partnering closely with operators and plant leadership to reduce variation, optimize productivity, and implement sustainable engineering solutions. Your Role at a Glance Operational responsibility could include, but are not limited to oversight of pipe threading, coupling manufacture, phosphating, pipe deformation & stress Drives process efficiency and quality through daily problem solving, pipe to pipe variation management and project work that produces sustainable results Supports a wide variety of projects managVibration Mountings And Controls Inc
Houston, TX 77041 • (23.4 miles) • Full Time • 11/14/2026
Description: The Quality Inspector works in conjunction with other QA personnel to support production. The QA Mechanical Inspector will use basic mechanical inspection tools and gauges to ensure a successful product line. Responsibilities not limited to: 1. Assurance of material criteria establishment Inspects incoming raw materials and components for conformance verification of traceability to existing inspection plans, customer/VMC drawings, sales and purchase orders Initiate and manage the MRB (Material Review Board) process 2. In Process Product Inspection Inspects the integrity of the product to the order with respect to dimensions, correct components, color, etc. Randomly samples the in process product to ensure specifications and dimensional checks Identifies manufactured products tSundek Decorative Concrete Coatings
Houston, TX 77041 • (23.4 miles) • Full Time • $16 to $20 / wk • 11/14/2026
Concrete Surfacing Technologies (CST) Department: Manufacturing & Warehouse | Reports To: Director of Manufacturing Employment Type: Full-Time | Location: Houston, Texas POSITION SUMMARY Concrete Surfacing Technologies (CST) seeks a dependable, motivated, detail-oriented Production Technician to join our manufacturing team. The Production Technician assists with manufacturing, packaging, handling, and distribution of decorative concrete and industrial coating products. This hands-on position requires attention to detail, the ability to follow established procedures, and a commitment to a safe, clean, and efficient production environment. The ideal candidate is mechanically inclined, works independently and as part of a team, and takes pride in producing quality products. KEY RESPONSIBILITIClair Global Corporation
Houston, TX 77018 • (26.7 miles) • Full Time • 11/14/2026
Position Summary LD Systems provides professional audio, video, lighting, rigging and technical production services for major festivals, concerts and live events. We seek a hands-on Safety Coordinator to conduct field safety audits, identify hazards and work with production teams to implement corrective actions. The role requires practical knowledge of entertainment rigging, temporary electrical power distribution and safe work practices during load-in, show operations and load-out. Key Responsibilities Conduct scheduled and unannounced site safety inspections at festivals, concerts and other productions; assess conditions during load-in, installation, operation and load-out. Audit entertainment rigging activities involving truss, chain hoists, motors, slings, shackles, suspended loads andTexas Compression LLC
Houston, TX 77043 • (26.9 miles) • Full Time • 11/14/2026
Company: Texas Compression LLC Location: Texas – Project-Based / Field Work Employment Type: Full-Time Travel: Required; primarily Texas industrial facilities Industry: Industrial Construction, Maintenance & Equipment Installation Position Summary We are currently looking for experienced reciprocating and centrifugal compressor technicians upcoming projects Diagnose, plan and execute repairs on compressor / driver failures accurately and efficiently. Maintain accurate record keeping on work performed. Ability to work with basic hand tools Ensuring that the worksites are clean and safe Helping with heavy machinery Key Responsibilities Complete, accurate, and timely rebuilds / overhauls of compressors, drivers and controls on compressor packages in the field. Work in adverse weather conditioFleetzero
Houston, TX • (30.1 miles) • Full Time • $110,000 to $160,000 / yr • 11/14/2026
ENGINEERS WANTED for a hazardous journey. Small wages, high voltages, long hours of difficult technical work, safe career choice doubtful. Riches and Glory in case of success. Wanted, specifically: a production engineer who would rather build the jig than draw the part. The role You will turn Fleetzero's designs into parts and modules we can build repeatedly, at production rate. Our engineers will bring ideas that have never been built. You decide how they get built: the jigs, fixtures, tooling, and automation that take a first article to a factory throughput number. We want a machine-tool and production-engineering expert from high-volume manufacturing: automotive, aerospace, launch, defense, or electronics. Fleetzero's LFP battery system, Leviathan, and the vessels built around it are maProesis Biologics, Inc
Houston, TX • (30.1 miles) • Full Time • 11/14/2026
Proesis Biologics is a contemporary and forward-thinking human source plasma collection platform dedicated to improving the plasma donation journey for all stakeholders. We partner with communities and donors to supply the industry with the high-quality plasma necessary for treating people with rare and chronic conditions worldwide. We strive to create a collaborative and engaging culture focused on bold authenticity, intense curiosity and innovation, fierce donor advocacy, and growth. The Quality Assurance Manager will work onsite in our Houston plasma donation center to oversee all quality related aspects of the center and its processes. This position works alongside the center staff and leadership to collaborate with the corporate quality team to ensure donor safety, suitability, and prChannel Personnel Services
Houston, TX • (30.1 miles) • Full Time • $90,000 to $100,000 / yr • 11/14/2026
The Mechanical Engineer will support the design, analysis, and testing of mechanical components and enclosures for aerospace and ruggedized computing systems. This hands-on role is ideal for an early-career or mid-level engineer who is eager to develop expertise in structural integrity, thermal performance, and environmental durability. The engineer will contribute to mechanical CAD layout, material selection, prototype assembly, and mechanical testing activities while working closely with senior engineers for mentorship and guidance. This position offers an opportunity to learn advanced aerospace design practices and grow into a highly skilled mechanical designer. DUTIES / RESPONSIBILITIES Mechanical Design Support: Create and modify mechanical models and drawings using CAD tools. AssistBlue United Sourcing
Houston, TX • (30.1 miles) • Full Time • 11/14/2026
Manufacturing Controls Engineer (Level 1) *All applicants must be Fully Authorized to work in the United States without employer sponsorship, now and in the future. Location : Garland, TX | On-Site Schedule : Monday–Friday, approximately 8:00 AM–5:00 PM | 24/7 facility support with an on-call rotation approximately one weekend every 4–5 weeks. Most on-call support can be handled remotely; occasional on-site response may be required. Salary Range : $80,000–$83,000 annually (depending on experience) Total Compensation Package : Medical, Dental & Vision, 401k with 6% match, PENSION PLAN, API Bonus, Continuing Education, Relocation Assistance, and more! Employment : Full-Time W2, Direct Hire Required Experience : Minimum 1 year of relevant hands-on industrial plant support experience in a manuThyssenkrupp Nucera USA Inc
Houston, TX 77094 • (30.8 miles) • Full Time • 11/14/2026
Instrumentation Engineer About us: thyssenkrupp nucera offers world-leading technologies for high-efficiency electrolysis plants in both chlor-alkali and green hydrogen applications. As part of thyssenkrupp’s Decarbon Technologies segment, the company brings extensive engineering, procurement, and construction expertise in electrochemical plants, supported by a strong track record of more than 600 successfully installed projects with a total rating of over 10 gigawatts. Building on more than 50 years of chlor-alkali experience, thyssenkrupp nucera is expanding water electrolysis technology to produce green hydrogen at industrial scale for green value chains and an industry powered by clean energy. About the Role: thyssenkrupp nucera USA is seeking an experienced Instrumentation Engineer toPSI
Houston, TX 77201 • (32 miles) • Full Time • 11/14/2026
The Quality Engineer is responsible for driving defect prevention through robust process controls, risk assessment, and data-driven continuous improvement. This position partners closely with Manufacturing Engineering and Operations to develop PFMEAs, Control Plans, process capability improvements, and corrective action systems that improve product quality and manufacturing performance. Key Responsibilities Facilitate PFMEAs and process risk assessments. Develop and maintain Control Plans. Lead root cause and corrective action investigations. Analyze quality trends, escapes, and defect data. Conduct statistical analysis and process capability studies. Develop quality dashboards and metrics. Drive continuous improvement and COPQ reduction initiatives. Support manufacturing readiness and proBurrow Global, LLC
Houston, TX 77027 • (32.4 miles) • Full Time • 11/14/2026
Burrow Global Automation is recruiting energetic individuals to join our growing team in Houston, TX (Deer Park office). Burrow Global Automation is a vendor neutral Automation Systems Integrator who manages and supports all aspects automation projects from concept through to operation, focusing on the energy, specialty chemical and sustainable energy markets. Working closely with our clients, we enable their processes to operate, striving for the utmost safety and efficiency - all the while providing a fun, challenging and balanced team environment for great people. Burrow Global Automation is looking for Control System Engineers with proficiency in DCS Batch Control for development and support of clients’ process control systems and operational technology. Development services pertain toGeneral Technologies, Inc.
Stafford, TX 77477 • (39.6 miles) • Full Time • 11/14/2026
General Technologies, Inc., has immediate openings for Process Technicians on 3rd shift (10:45pm - 7:15am). Must have prior experience as a process technician in a injection molding Description Perform setup, startup, diagnosis and troubleshooting of the injection molding presses, all auxiliary equipment and all secondary production equipment Independently perform machine adjustments within allowable parameters and perform routine machine maintenance tasks that optimizes efficiency of the tool Communicates problems and corrective action with Maintenance Manager and Shift Supervisor Document all records related to downtime, scrap, repairs, process deviation, etc. Maintain positive employee relations and adhere to Company policies and safety standards Housekeeping must keep work area clean aSystel Inc
Sugar Land, TX 77478 • (40.3 miles) • Full Time • 11/14/2026
Systel Careers – Component Engineer – Sugar Land, TX Systel’s business is expanding, and having components readily available is one of the main reasons why. Component Engineer bridges the gap between design engineering, sourcing, and manufacturing. This role ensures that the electronic and mechanical parts selected for hardware products meet strict performance, reliability, and regulatory standards. In the aerospace sector, this position focuses heavily on component longevity, environmental ruggedization, and stringent compliance. Who You Are The Component Engineer evaluates, selects, and qualifies electronic components used in highly reliable aerospace and rugged computing systems. This role collaborates closely with hardware design teams to guide part selection from the early stages of dD7 PNEUMATICS LLC
Houston, TX 77002 • (32.5 miles) • Part Time • $30.00 to $40.00 / hr • 11/14/2026
D7 Pneumatics LLC is seeking an experienced QA/QC Manager to support our fabrication shop and field operations based in Jonesboro, Arkansas. This position will begin on a part-time or as-needed basis, with the potential to develop into a full-time role based on workload and company growth. The QA/QC Manager will be responsible for implementing and maintaining D7’s Quality Control Program, supporting ASME and National Board Code work, and ensuring fabrication and field activities comply with approved procedures, project specifications and applicable codes. Key Responsibilities Administer and enforce the D7 Quality Control Manual and related procedures. Oversee quality activities for shop fabrication and field installations. Review contracts, drawings, specifications and project requirementsTDP Bakery
Houston, TX 77040 • (22.4 miles) • Full Time • $13.50 to $15.00 / hr • 11/14/2026
Who doesn’t love doughnuts? TDP Bakery exists to bring fresh indulgent bakery products to places where people could normally never enjoy them. Fresh, never frozen, bakery is just better. Through our BakeFace brand private-label partnerships, we supply a broad portfolio of Honestly Fresh baked goods to retailers nationwide. At TDP Bakery, we bring positive energy to every shift and support one another as a team. We take pride in the work we do and in knowing that there's a doughnut in someone's hand at 6 a.m. and a smile that comes with it. We value people who follow through on commitments, take ownership of their work, treat others with respect, and look for opportunities to learn and grow. We celebrate big and small wins, help our teammates succeed, and understand that every batch, everyHigh Tech Machine
Houston, TX 77041 • (23.4 miles) • Full Time • 11/14/2026
High Tech Machine is seeking a Quality Control Manager who is a hands-on leader and a true team player within the Quality Control Department. The ideal candidate has a strong quality background, including setting up and checking quality processes at every inspection point for our machine shop. You’ll play a key role in contributing to our Quality Management System, making sure our work meets customer requirements at every stage, from receiving material to final shipment. You should have a sharp eye for detail, a positive attitude, and the flexibility to adjust to changing priorities in a fast-paced environment. You should also hold yourself accountable to your team and keep looking for ways to continually improve. KEY RESPONSIBILITIES: Review and verify job travelers before production starW3Global Inc.
Waller, TX • (24.4 miles) • Part Time • $120,000 to $130,000 / yr • 11/14/2026
Key Responsibilities Manage and oversee the day-to-day activities of the Quality Department. Perform visual weld inspections, dimensional inspections, and fit-up verification throughout fabrication and final assembly. Verify welder qualifications, ensure compliance with approved WPS/PQRs, and maintain welder continuity records. Review engineering drawings, customer specifications, and Inspection & Test Plans (ITPs) before fabrication. Witness pressure and leak testing and coordinate Non-Destructive Examination (NDE), including RT, UT, and PT, with qualified vendors. Document nonconformances and support root cause analysis and corrective actions. Coordinate and support Authorized Inspector and customer inspection visits. Maintain inspection records and prepare quality documentation packagesMesser LLC
Houston, TX 77084 • (26.7 miles) • Full Time • 11/14/2026
Job Summary: Messer owns and operates a large portfolio of industrial gas plants, including ASU, CO2, H2, He, as well as on-site plants, serving customers within a wide range of industries. Electrical infrastructure is a key component required for operation of these industrial gas plants. This position will report to the Area Maintenance and Reliability Hub Team, supporting the Area Operations Teams, providing technical engineering support and SME recommendations for all of the electrical equipment and infrastructure utilized within the facilities in the area. Why Messer? Messer is the world’s largest privately held industrial gases company and what we do matters because it is woven into every part of life, from the medical gases that patients rely on to the essential elements needed to saComTec
Houston, TX • (30.1 miles) • Full Time • $45.00 to $50.00 / hr • 11/14/2026
We are looking for an experienced Quality Engineer with a strong background in metal fabrication, welding inspection, and manufacturing quality. The ideal candidate will have experience conducting structural, mechanical, and electrical inspections in an industrial manufacturing environment. The candidate will be responsible for developing and executing project quality plans, inspecting fabricated components, verifying welding documentation, coordinating FAT/IFAT activities, managing nonconformances, and ensuring compliance with applicable industry standards and building codes. Experience with AWS CWI certification, electrical distribution equipment, eHouse/PDC manufacturing, and supplier quality is highly desirable.Smith Personnel Solutions
Houston, TX • (30.1 miles) • Full Time • 11/14/2026
Senior Mechanical Engineer - Mud Pump Location: Hybrid (3 days onsite, 2 days remote after training) Job Type: Direct Hire, Full-Time Salary: $110,000 - $118,000 Bonus: Up to 10% annual incentive bonus based on company performance Relocation: Available for the right candidate Position Summary We are seeking a Senior Mechanical Engineer with experience designing Mud Pumps, Positive Displacement Pumps, Frac Pumps, or similar pumping equipment. The ideal candidate will have a strong background in machine design, product development, and mechanical system analysis. Responsibilities Design and develop mechanical equipment and pumping systems. Create detailed engineering models, drawings, and documentation. Perform stress analysis and engineering calculations. Conduct tolerance studies and desigUni-Form Components Corp
Houston, TX 77044 • (30.3 miles) • Full Time • 11/14/2026
Uni-Form Components is looking for a dependable, safety-focused Press Prep team member to support our Press operations. This position is responsible for preparing upcoming jobs by reviewing job cards, gathering and staging the correct tooling, and making sure the Press team has what they need before setup begins. The goal of this role is to help keep production moving by staying ahead of the Press team and reducing setup and changeover time. What You'll Do Review upcoming job cards and production requirements. Identify and gather the correct tooling needed for each job. Clean tooling before and after use to ensure it is a ready for production and properly maintained. Inspect tooling during the cleaning and preparation process for damage, excessive wear, or other concerns. Stage and organizEataly North America
Houston, TX 77056 • (31.5 miles) • Full Time • 11/14/2026
Company Description Eataly is the world’s largest artisanal Italian food and beverage marketplace! Eataly is not a chain; each Eataly is different, with its own character and own theme – but all with the same aim... for our guests to: EAT authentic Italian food at our restaurants, cafs and to-go counters SHOP a selection of high-quality Italian, local and homemade products LEARN through our classes and our team’s product knowledge Job Description Bakery Manager The Bakery Manager oversees the production of bread products for an Eataly, including but not limited to: breads, pizza alla pala, rolls, focaccia and seasonal items. The Bakery Manager leads and develops a team of Bakers, Pizza Makers, and the Assistant Baker Manager in a 24-hour-operating bakery. Reports directly to the Head Chef.Environmental And Safety Solutions, Inc.
Houston, TX 77002 • (32.5 miles) • Full Time • $42.00 to $60.00 / hr • 11/14/2026
Job Title: Supplier Quality Representative (SQR) Central Texas Iron Works: Area: Schertz/San Antonio, TX. Timeline Needs: SQR to be available Monday-Friday as full-time inspector on Structural steel. 40 hours a week forecast currently projected for next 3-6 months. Coverage: Must have Structural steel experience, candidate should be comfortable reviewing drawings, specifications, PO requirements, inspection and test requirements, supplier documentation, and identifying or documenting nonconformances. Experience: : Prefer candidates with at least 4–5 years of Quality Assurance/Quality Control (QA/QC) , supplier quality, or shop-surveillance experience. Structural Steel Fabrication and coating experience is strongly preferred(CWI). Supply Chain - Company Supplier Quality and Expediting. PosiPROMAN Skilled Trades
Huntsville, TX • (34.9 miles) • Full Time • 11/14/2026
Job description Proman Skilled Trades is currently seeking experienced HVAC Sheet Metal Mechanics for a variety of large scale construction projects. You will be working on Commercial construction projects in the Huntsville, area. Responsibilities • Install Sheet-Metal Duct (Squared, Round,Spiral, Rectangular etc.) • MUST have some pipe fitting experience, know how to apply Pookie and insulate • Install grills and dampers and set units • Set curbs for RTU's • Adhere to all quality and safety codes Qualifications At least 2 year of commercial experience in the HVAC Sheet-Metal field• Familiarity with Sheet-Metal schematics, blue prints and manuals• Familiarity with Sheet-Metal equipment and hand tools • Must be able to handle a physical work load • Must have own tools and reliable transportWK Industrials Services - USA
Katy, TX 77494 • (35.5 miles) • Full Time • $24.00 to $29.00 / hr • 11/14/2026
Junior Mechanical Systems Millwright Technician Build what keeps industry moving At WK Industrial Services Corp., we install, align, move, and maintain the machinery that powers manufacturing across the country. Join us on a growth path from hands-on helper to fully trained millwright, learning directly from seasoned pros. Your impact From day one, you’ll contribute to precise machinery installs, careful rigging operations, and reliable maintenance that keeps production running. You’ll sharpen your skills with precision measurement tools and learn to interpret drawings so every component lands exactly where it should. Responsibilities Assist with installation, alignment, and assembly of conveyors, motors, gearboxes, pumps, and automated equipment Support leveling, anchoring, grouting, andKingfisher Recruiting
Houston, TX 77001 • (38.4 miles) • Full Time • $32.00 to $40.00 / hr • 11/14/2026
HDD Foreman Live anywhere in Texas $32-$40 per hour Vehicle allowance Must be willing to travel to job sites across the state: rotations or extended stays away from home (3-4 weeks away, 5 day holiday periods.) Lead a skilled HDD crew on water and sewer utility projects across Texas. You'll run 100x140 rigs and larger, pulling 24-inch pipe on municipal and infrastructure work, with weekly pay, a vehicle allowance, and $125 per diem when travelling. What you'll get $32 to $40 per hour, depending on experience. Weekly pay. Vehicle allowance. Medical, dental, vision and employer-paid life insurance after 60 days. 401(k) with 4% employer match. Paid holidays and PTO after 6 months. $125 per diem for lodging and food when travelling. Your role Plan daily work, assign crew responsibilities, andGlobal Talent Resources, Inc
Houston, TX 77001 • (38.4 miles) • Full Time • 11/14/2026
Location(s) Houston, Texas Compensation Competitive base salary plus performance-based bonus Position Summary The Quality & Test Manager will lead the development and implementation of quality management and electrical testing operations at a new transformer manufacturing facility in Houston, Texas. This role oversees quality systems, transformer testing, inspections, and final product release to ensure compliance with industry standards and customer requirements. The ideal candidate brings extensive transformer-testing expertise, strong leadership skills, and experience establishing quality processes in a manufacturing environment. Job Function Establish the plant quality management system, controlled procedures, inspection plans, and traceability requirements. Define acceptance checkpoinDover Manufacturing Corporation
Houston, TX 77047 • (41.9 miles) • Full Time • $25.00 to $30.00 / hr • 11/14/2026
Step into a precise rhythm where consistency meets craftsmanship As our CNC Production Machinist, your evenings begin on second shift, Monday–Thursday, 3:30 pm–2:00 am. You’ll run repeatable production on standardized parts, moving confidently between CNC lathes and mills (including multi-axis/5-axis equipment as qualified), following prescribed setups and procedures. Every cycle you run is verified through in-process and final inspections to ensure parts meet exacting standards. What your nights look like You review prints and sketches, dial in tooling, and perform setups to hold close tolerances. The first piece you produce is checked to procedure; throughout the run, you monitor quality with gauges and measuring devices. You document time, counts, and first-article results; you build jiAWC, Inc
Deer Park, TX 77536 • (43.5 miles) • Full Time • 11/14/2026
We’re seeking driven, curious people who bring energy to what they do and see challenges as opportunities to learn and improve. Our team of co-owners values enthusiasm, creativity, and a growth mindset, and we’re committed to putting those qualities to work on solutions that matter. If you’re ready to grow and make an impact, we’d love to be on your team. The Manufacturing Engineer – Controls & Power Assembly is responsible for designing, improving, documenting, and sustaining the manufacturing processes used to build AWC’s Controls and Power Assembly products. Working at the intersection of Engineering and Manufacturing, this role transforms product designs into safe, efficient, repeatable, and scalable manufacturing processes. The Manufacturing Engineer uses data, direct observation, engPipecare Group
Houston, TX 77041 • (23.4 miles) • Full Time • 11/13/2026
Position Summary The Electronics Technician - ILI Systems & Equipment owns the full lifecycle of PIPECARE Western Hemisphere’s electronics assets - bench-level preparation, testing, calibration, repair, and reliability support across the region’s inspection technologies (Caliper, MFL, UTWM/UTCD, and EMAT), the tracking and locating equipment that supports every mobilization (AGM units, toolmounted transmitters, and pig locators) - together with management of the electronics store, tool inventory, consumables, and the component requisitioning that ties it all together. Given the size of WH’s tool fleet and its annual tool-prep volume, this is designed and resourced as a single-incumbent role covering both functions. It shall be noted that PIPECARE has subsidiaries around the world and, althDreams 2 Reality Recruitment
Houston, TX 77041 • (23.4 miles) • Full Time • 11/13/2026
Position Overview We are seeking an experienced Senior Mechanical Engineer to lead the design, development, testing, and continuous improvement of mud pumps, positive displacement pumps, frac pumps, and related mechanical equipment. The ideal candidate will have a strong background in machine design, pump systems, mechanical engineering principles, and equipment performance, with hands-on experience developing reliable and high-performance mechanical solutions. This role will work closely with engineering, manufacturing, and cross-functional teams to develop innovative designs that meet performance, safety, quality, and industry compliance requirements. Important Requirement: Direct experience designing mud pumps, positive displacement pumps, frac pumps, or closely related pumping equipmenQuaise Energy, Inc
Houston, TX • (30.1 miles) • Full Time • 11/13/2026
Quaise Energy is unlocking Earth's deep heat to deliver clean, reliable, baseload energy at scale – almost anywhere in the world. As both a technology innovator and project developer, Quaise builds and operates solutions that harness superhot geothermal energy far below the surface, enabling power generation that can rival the output of today's most efficient fossil fuel and nuclear plants. Leveraging millimeter wave drilling, developed after more than a decade of research at MIT, Quaise's mission is to make superhot geothermal a backbone of the modern energy system, offering affordable, zero-carbon power and true energy independence for communities and nations everywhere. Quaise is seeking a Mechanical Engineer II to lead component-level design and development for lab-scale and field-readThorpe Plant Services, Inc.
Houston, TX 77028 • (30.2 miles) • Full Time • 11/13/2026
Role and Responsibilities Construct, install, and dismantle scaffolding systems according to blueprints, project requirements, and safety standards. Ensure scaffolding is secure, stable, and properly supported throughout the construction process. Cutting, and welding steel beams, columns, girders, and other components using metal shears, torches, and welding equipment. Connecting structural members with bolts or welding, ensuring proper alignment and fit. Rigging and hoisting heavy loads safely utilizing proper equipment and signaling/positioning crane picks. Safely use scaffolding materials such as pipes, tubes, boards, and supports to create temporary structures for workers at height. Conduct thorough inspections of scaffolding systems before, during, and after installation to ensure strTalascend
Houston, TX 77001 • (38.4 miles) • Full Time • 11/13/2026
Talascend is currently seeking a Mechanical Engineer for a long-term contract opportunity with our client in Houston, Texas . Overview This role involves conducting field investigations and client interviews to determine work scope and cost estimates for mechanical aspects of projects. The engineer will lead design, development, modification, and evaluation of mechanical components and processes, ensuring technical issues are resolved and project requirements are met. Responsibilities Plan, schedule, conduct, and coordinate detailed phases of engineering work within the mechanical discipline on projects or staff groups. Perform work that involves conventional engineering practices and may include complex features such as resolving conflicting design requirements and challenging coordinatioForeverPure Corporation
Sugar Land, TX 77498 • (39 miles) • Full Time • $70,000 to $100,000 / yr • 11/13/2026
We are looking for an experienced and highly-qualified Controls Engineer with at least 10 years of industrial experience to oversee the development of automated control systems. We primarily work with electrical systems, so our ideal candidate has at least a bachelor's degree in electrical engineering. You use PLC programming products, such as those made by Siemens and Allen Bradley, to create reliable and user friendly control systems. You also must know how to draft schematics in AutoCAD. Controls Engineer Duties and Responsibilities Analyze the processes of the assigned facility or equipment Identify shortcomings that could be opened by automation Design systems that can automate processes Maintain and repair systems Inspect systems to ensure they meet safety regulations Develop technicApplied Optoelectronics, Inc.
Sugar Land, TX 77478 • (40.3 miles) • Full Time • 11/13/2026
Summary The Process Integration Engineer will be responsible for semiconductor process integration in optical laser fabrication. The engineer should have experience with front-end and back-end-of-line, and packaging processing. Good understanding of reliability evaluation techniques and understanding failure analysis experience is desirable. He/she will collaborate with other individuals and functional teams, define projects, address issues, develop improvement plans, and finally to document and deliver the desired end results. Responsibilities 1. Wafer Process Work with Process Engineers to develop processes to maximize operational efficiency Optimize current processes to improve manufacturability, yield and performance of products 2. Project Management Work with process and process integHoelscher Weatherstrip
Tomball, TX 77375 • (7.8 miles) • Full Time • $17.00 / hr • 11/13/2026
We’re hiring a Painter/Stainer! We are looking for experienced, reliable, hard-working employees who can interview immediately! Experience with doors a BIG PLUS! Job Title: Stainer Pay: $17 Hours: Mon-Fri, 6am-2:30pm - Saturday and other OT very frequent Description of Duties: This position is responsible for sanding, cleaning and applying stain, ensuring surface preparation and quality standards are met. The associate will also follow safety protocols, maintain a clean and organized workspace, and support continuous improvement initiatives while accurately reporting labor and maintaining company records. Heavy lifting required as well. Requirements: Candidates must have experience with sanding and stain applications. Reliability, effective communication, and the ability to follow procedurGCP PAPER USA, INC
New Caney, TX • (20.2 miles) • Full Time • 11/13/2026
Company: GCP PAPER USA, Inc. Location: Houston/New Caney, TX Job Type: Full-Time FLSA Status: Exempt Job Summary Reporting to the Plant Engineering / Maintenance Manager, the Mechanical Engineer applies specialized engineering principles, mechanical theory, and technical analysis to optimize plant equipment reliability, continuous machinery performance, and industrial paper manufacturing processes. While maintaining a direct engineering presence on the active manufacturing floor to analyze machinery behavior and direct complex technical troubleshooting, this position’s primary function relies on advanced technical expertise, design evaluation, root cause investigation, and continuous engineering improvement projects. Essential Duties & Responsibilities Learned Engineering Analysis & DesignCAVA - Cypress
Cypress, TX 77433 • (20.8 miles) • Full Time • $15.25 / hr • 11/13/2026
Team Members At CAVA, we love what we do, and we try and make every day as fulfilling as the last. Our restaurants need team members to make the magic happen every day. Everyone matters and we’re here to celebrate your growth. We foster a culture built on five core values: Positivity – Every one of us can change someone’s day for the better. Transparency –We use transparency to help us make decisions through open dialogue Humility – We can always find ways to improve. Fanaticism – We are passionate about the opportunity to turn every guest into a fanatic. Thoughtfulness –We go above and beyond for our guests, our teams and communities. The Role: Team members are responsible for creating exceptional guest experiences for each customer, every time they walk through our doors. From greeting gUPG Company LLC
Houston, TX 77040 • (22.4 miles) • Full Time • $20 to $22 / yr • 11/13/2026
Production Coordinator Job Title Production Coordinator Department Production Reports To Production Supervisor Location 7865 Northcourt Rd, Suite #100, Houston, Texas 77040 FLSA Status Non-Exempt Effective/Revision Date 11/2026 Role Purpose The Production Coordinator supports daily manufacturing operations by maintaining accurate shift and work-order records, coordinating production and quality activities, and assisting the Production Supervisor in resolving operational issues. The role provides backup support to the Production Lead when needed and participates directly in production and assembly activities to help meet safety, quality, delivery, and productivity expectations. Scope & Responsibilities Key Responsibilities: Production Coordination: Support execution of the assigned shift’sProsources Trace-A-Matic LLC
Houston, TX 77040 • (22.4 miles) • Full Time • 11/13/2026
Description: Are you ready to make an impact? Are you ready to be a part of a stable and growing organization perfect to grow yourself and your career? Then read on: At Trace-A-Matic we believe the people are our biggest assets! We provide a friendly, clean and safe work environment for all to grow and thrive! Our core focus is to achieve excellence in complex precision machined components and customer satisfaction. We also offer Gainsharing! So, if the company makes a profit, they split it 50/50 with the employees, which gets paid out on a quarterly basis! Trace-A-Matic Offers: Health Dental Vision 401K Gain Sharing Tuition Reimbursement 10 paid holidays Service Based PTO Tuition Reimbursement Safety Shoe and Safety Glasses Reimbursement Trace-A-Matic is hiring 1st Shift and 2nd Shift CNCGrupo Cox Global Services, USA, LLC
Houston, TX 77079 • (29.5 miles) • Full Time • 11/13/2026
Benefits: 401(k) Paid time off 401(k) matching Dental insurance Health insurance About the Role: Grupo Cox Global Services, USA, LLC is looking for a talented and driven Electrical Engineer to join our growing team in Houston, TX. This is an exciting opportunity to apply your technical expertise in a dynamic, global environment where your work makes a real impact. If you're passionate about engineering solutions and ready to take your career to the next level, we want to hear from you! Job Summary / Overview The Electrical Engineer supports the design, development, and execution of electrical engineering activities for EPC projects from conceptual design through commissioning and project turnover. This role provides technical expertise in power generation, distribution, electrical equipmenSST Direct
Houston, TX • (30.1 miles) • Full Time • 11/13/2026
Mechanical Engineer (PE) Location: Austin, TX; Phoenix, AZ; Durham, NC; Baltimore, MD; Columbia, MD; or Morrisville, NC Job Type: Direct Hire Experience: 4+ Years License: Professional Engineer (PE) Required Compensation: Competitive salary based on experience and qualifications Direct Hire Opportunity Superior Skilled Trades is partnered with an established engineering company seeking a Mechanical Engineer (PE) to join its engineering team. This is an excellent opportunity for a licensed Mechanical Engineer to contribute to technically complex projects by developing mechanical system designs, preparing engineering drawings and specifications, performing engineering calculations, and supporting projects from conceptual design through construction. The ideal candidate will have professionalOne Stop Machine Shop
Houston, TX • (30.1 miles) • Full Time • $25.00 to $35.00 / hr • 11/13/2026
CNC Mill Machinist – Setup & Operation | $25–$35/Hour Location: North Houston, TX (Near Beltway 8 and Hardy Toll Road) Pay: $25.00–$35.00 per hour, based on experience Schedule: 1st Shift | 40 hours per week Job Type: Full-Time | Direct Hire Openings: 1 Experience: 5 years minimum | 8+ years preferred 5-Axis CNC Milling Experience: Highly Preferred Experienced CNC Mill Machinist Wanted Can you independently set up a CNC mill, select the right tooling, troubleshoot machining problems, and consistently hold tight tolerances? If so, we want to speak with you. One-Stop Machine Shop (OSMS) is recruiting an experienced CNC Mill Machinist for a permanent, direct-hire opportunity with an established machine shop in North Houston. We are looking for a hands-on machinist who understands machining prElite Recruiting & Consulting Services
Houston, TX • (30.1 miles) • Full Time • 11/13/2026
Quality Control Manager (QCM) – Federal Construction Location: Fort Jackson, South Carolina Project: Barracks Renovation Salary: $150,000 annually Employment Type: Full-Time Travel: Must be open to travel for future projects Position Overview We are seeking an experienced Quality Control Manager (QCM) to provide on-site quality control leadership for a barracks renovation project at Fort Jackson, South Carolina . The QCM will be responsible for implementing and managing the project’s quality control program, coordinating inspections and testing, monitoring construction activities, and ensuring work is completed in accordance with contract documents, plans, specifications, and applicable federal construction requirements. This position is ideal for an experienced federal construction profesTurner & Townsend
Houston, TX • (30.1 miles) • Full Time • 11/13/2026
Company Description Turner & Townsend is a global professional services company with over 22,000 people in more than 60 countries. Working with our clients across real estate, infrastructure, energy and natural resources, we transform together delivering outcomes that improve people’s lives. Working in partnership makes it possible to deliver the world’s most impactful projects and programs as we turn challenge into opportunity and complexity into success. Our capabilities include program, project, cost, asset and commercial management, controls and performance, procurement and supply chain, net zero and digital solutions. We are majority-owned by CBRE Group, Inc., the world’s largest commercial real estate services and investment firm, with our partners holding a significant minority inteRemedy
Houston, TX • (30.1 miles) • Full Time • 11/13/2026
Thirty Madison is now part of Remedy! You can read more about the acquisition here. We are excited to join forces and continue to revolutionize healthcare accessibility! As a Production Manager, Compounding Operations, you will oversee daily production activities across sterile and non-sterile compounding operations, ensuring efficient workflows, accurate batch scheduling, and consistent production output while maintaining the highest standards of quality and regulatory compliance. This position requires an active, unrestricted pharmacist license. The ideal candidate combines a strong pharmacy background with hands-on production management experience and the ability to lead and scale compounding operations. You will work closely with pharmacy leadership, compounding pharmacists, technicianKelso Industries
Houston, TX • (30.1 miles) • Full Time • 11/13/2026
Together We Build – Partnership, Innovation, Excellence, and Safety At Kelso Industries, 5,000+ employees across 40+ companies work together to deliver exceptional HVAC, mechanical, plumbing, refrigeration, and electrical solutions nationwide. Join us to grow your career, make an impact, and be part of a team where innovation, excellence, and safety come first. Recruiter Notice: We respectfully ask external recruiters and staffing agencies not to submit candidates. We only accept direct applications. Job Description Project Manager will be responsible for planning, directing and coordinating work performed by our subcontractors on site to ensure that construction schedules are met and that our customers receive the quality and workmanship we demand in our finished projects. Must be familiaNuHire
Houston, TX 77049 • (34.7 miles) • Full Time • $30.00 to $36.00 / hr • 11/13/2026
Your Day, Powered by Precision Picture this: the plant is humming at full speed. A heat-treatment unit throws a fault, production halts, and you step in. You trace the issue through a 480V, 3-phase feed, validate readings with your meter set, isolate the failure in the VFD chain, and bring the line back online-safely and efficiently. If that sounds like your kind of day, you’ll thrive here. What You’ll Do Build and maintain systems: Assemble, install, test, and service industrial electrical wiring, apparatus, and fixtures using hand, power, and precision measuring tools. Diagnose fast, fix right: Pinpoint issues in circuits and components with ohmmeters, voltmeters, and megohmmeters; identify root causes and perform lasting repairs. Connect the powertrain: Wire circuit breakers, transformeBinyod LLC
Houston, TX 77071 • (37.8 miles) • Full Time • $20.00 to $30.00 / hr • 11/13/2026
BINYOD LLC | NOW HIRING TEAM LEAD (FOREMAN) Houston, TX – field-based; travel within Texas as assigned Job title Team Lead (Foreman) Company Binyod LLC Location Houston, TX – field-based; travel within Texas as assigned Job type Full-time, W-2 (hourly, overtime eligible) OR Independent Contractor (1099) Pay $25 – $30 per hour + overtime Schedule Monday – Friday day shift with early starts; occasional weekend or out-of-town work Reports to Lead Technician / Project Manager Are you the person on site who keeps the crew organized, safe, and on target? Binyod is looking for a Team Lead to run daily field production on low-voltage and security system projects across Texas. ABOUT BINYOD Binyod LLC is a Houston-based technology integrator that designs, installs, and supports low-voltage, ICT, andDeterco Inc
Houston, TX 77011 • (34.6 miles) • Full Time • $18.00 / hr • 11/12/2026
Benefits: 401(k) Health insurance Paid time off 401(k) matching Dental insurance Vision insurance We are seeking a skilled and detail-oriented Onsite Calibration Technician to join our team. In this role, you will be responsible for testing, adjusting, and calibrating physical and dimensional precision measurement equipment at customers facility. The ideal candidate will have direct, hands-on experience calibrating critical dimensional inspection tools, with a specific focus on Optical Comparators and Mic Tracs . Key Responsibilities Equipment Calibration: Perform routine and complex calibrations on dimensional inspection equipment, specifically focusing on Optical Comparators and Mic Tracs (Micro-Trac systems). Technical Compliance: Ensure all calibration activities comply with industry s
Aerotek
Spring, TX • (13.6 miles) • Full Time • 11/12/2026
Job Title: Electronic Assembler Job Description This role focuses on assembling electronic components and systems according to detailed schematics and specifications. You will perform precise soldering on printed circuit boards, fabricate parts as needed, and use hand tools and measuring instruments to ensure high-quality, reliable assemblies. The position also involves troubleshooting assembly processes and equipment to maintain smooth production operations. Responsibilities Assemble electronic components and systems in line with detailed schematics, technical drawings, and specifications. Perform soldering tasks on printed circuit boards (PCBs) and other electronic components, with a focus on surface mount technology (SMT). Utilize hand tools and precision measuring instruments, such asFull Circle Recruiting
Conroe, TX 77306 • (14.9 miles) • Full Time • 11/12/2026
We are seeking an experienced QC Inspector to join the team! The QC Inspector will be responsible for ensuring that products meet established quality standards before reaching our customers, with a primary focus on dimensional inspection using FARO portable CMM equipment (arm and/or laser tracker). This role involves performing precision measurement and inspection at various stages of production, identifying defects and dimensional non-conformities, and ensuring compliance with company specifications, engineering drawings, and regulatory requirements. The ideal candidate will have hands-on FARO experience, strong GD&T knowledge, excellent problem-solving skills, and a commitment to maintaining high-quality standards. Key Responsibilities Perform precision dimensional inspections using theRPT Alliance
Houston, TX 77064 • (19.1 miles) • Full Time • 11/12/2026
Bowman has an opportunity for an Mechanical Engineer (All Levels) to join our team in Houston, TX. At Bowman, we believe in creating opportunities for aspiring people to thrive and achieve ambitious goals. That's why a career at Bowman is more than a job. It is an opportunity to be part of a diverse and engaged community of professionals, to be treated as a respected and valued member of a motivated team and to be empowered to do exceptional work that advances the best interest of everyone involved. We recognize the importance of creating a work environment that is both rewarding to our employees and supportive of our unwavering commitment to provide unparalleled service to our clients. Responsibilities Competencies: Design Review Project Estimation & Planning Project Implementation ProjecGeneron
Houston, TX 77086 • (19.7 miles) • Full Time • $28.00 to $34.00 / hr • 11/12/2026
JOB DUTIES Read and interpret blueprints, P&IDs, schematics, and technical drawings Install and repair various types of instrumentation such as temperature, pressure, level, and flow gauges Thread, bend, cut and install tubing and piping systems as per specifications, templates and drawings Be able to install instrument stands, instrument air headers, instruments, tube tray, and screw pipe Have knowledge of high-pressure valves and fittings Test and troubleshoot instrumentation to ensure proper functionality and safety measures Maintain a clean, safe, and organized work environment Adhere to safety regulations and procedures QUALIFICATIONS High school diploma or equivalent Completed a recognized industrial mechanical course, technical diploma or equivalent education and work experience BasLocke Technical Services
North Houston, TX 77315 • (23.1 miles) • Full Time • $25.00 to $30.00 / hr • 11/12/2026
Industrial Painters are an important part of our manufacturing process. Must have experience with wet applications on industrial metal buildings and Epoxy primer and paint.Venus Aerospace
Houston, TX • (30.1 miles) • Full Time • 11/12/2026
Who We Are: Venus Aerospace is revolutionizing rocket engine propulsion. With the first generational leap in rocket engine technology since Apollo, our proprietary Rotating Detonation Rocket Engine and Venus Detonation Ramjets deliver historic efficiency and performance across aerospace applications. We are building the next generation of propulsion platforms that enable breakthrough capabilities in space, defense, and commercial high-speed flight. Our team thrives on solving the toughest engineering challenges and pushing the boundaries of what’s possible in aerospace. At Venus, we’re looking for bold engineers and innovators who want to make history and redefine the future of propulsion. The Role: Instrumentation Engineer The Instrumentation Engineer is a self-motivated, proactive profesAir-Nu Of Baton Rouge, LLC
Houston, TX • (30.1 miles) • Full Time • $27.00 to $30.00 / hr • 11/12/2026
Position Overview We are seeking a skilled and detail-oriented supervisor to lead duct cleaning operations with a strong focus on HVAC industrial hygiene, safety, quality, and customer satisfaction. In this role, you will oversee field crews, coordinate project execution, ensure adherence to industry standards, and help maintain clean, efficient indoor air systems across commercial and industrial environments. Responsibilities Supervise daily duct cleaning and HVAC hygiene operations, including crew scheduling, jobsite coordination, and workflow management. Ensure all work is completed in accordance with established industry standards, company procedures, and project specifications. Lead field teams in the proper use of cleaning equipment, containment methods, and verification procedures.Smart Family Of Cooling Products
Houston, TX • (30.1 miles) • Full Time • 11/12/2026
Job Summary: The Industrial HVAC Process Technician will perform maintenance, troubleshooting, and repairs to chillers and their ancillary equipment. Essential Job Duties: Inspect and troubleshoot problems with existing chiller equipment. Perform routine maintenance on chiller equipment to ensure they operate properly. Repair or replace parts on existing chiller equipment. Install, maintain, and repair industrial refrigeration systems including refrigerant handling, instrumentation, control valves, motors, motor controls, motor switch gear, Variable Frequency Drives (VFD’s), soft-starts, pumps, exchangers, filter, and refrigeration controllers. Position may require working up to 15% (no more than 300 hours) overtime throughout the year, as directed by the client and/or upper management. CoHFW Companies
Houston, TX 77042 • (31.7 miles) • Full Time • 11/12/2026
AutoCAD Drafter & Coordinator Location: Houston, TX Position Summary: Join our partner firm at Kuo & Associates (KUO) as an AutoCAD Coordinator / Drafter and play a key role in supporting the design and production of civil engineering projects that enhance infrastructure across the Greater Houston region. In this role, you will collaborate closely with engineers, designers, and survey teams to develop accurate technical drawings and maintain CAD standards that support the successful delivery of projects such as roadway design, water and wastewater systems, stormwater management, and site development. The AutoCAD Coordinator / Drafter will contribute to both the technical drafting and coordination of CAD production, ensuring consistency, efficiency, and quality across project deliverables.Skilled Craftsmen Of Texas
Houston, TX 77017 • (39.3 miles) • Full Time • $25.00 to $30.00 / hr • 11/12/2026
Overview We are seeking a skilled CNC Machinist to join our dynamic team in Houston, TX, 77017. In this role, you will be responsible for operating and programming CNC machines to produce high-quality parts and components. If you have a passion for precision and a knack for problem-solving, we want to hear from you! Responsibilities Set up and operate CNC machines (Lathes and\or Mills) to produce parts according to specifications. Read and interpret blueprints, technical drawings, and schematics. Experience of using Fanuc, Mazak, or Mazatrol controls. Program CNC machines using G-code and other relevant programming languages. Conduct quality control checks to ensure parts meet required tolerances and specifications. Perform routine maintenance on machines to ensure optimal performance. ColCAVA - The Grid
Stafford, TX 77477 • (39.6 miles) • Full Time • $15.25 / hr • 11/12/2026
Team Members At CAVA, we make it deliciously simple to eat well and feel good every day. We are guided by a Mediterranean heritage that’s been perfecting how to eat and live for four thousand years. We prioritize authenticity, curiosity and the pursuit of excellence in everything we do. We are working towards something big, together. We foster a culture built on five core values: Generosity First, Always: We lead with kindness. Our best work happens when we act in service of others. Constant Curiosity: We are eager to learn, grow, and explore beyond the obvious. Act with Agility: We welcome change; it’s the only constant. We embrace, adjust, adapt. Passion for Positivity: We greet each day with warmth and possibility. Collective Ambition: We have high aspirations that are achieved when weCAVA - Waterview Town Center
Richmond, TX 77406 • (41 miles) • Full Time • $15.25 / hr • 11/12/2026
Team Members At CAVA, we make it deliciously simple to eat well and feel good every day. We are guided by a Mediterranean heritage that’s been perfecting how to eat and live for four thousand years. We prioritize authenticity, curiosity and the pursuit of excellence in everything we do. We are working towards something big, together. We foster a culture built on five core values: Generosity First, Always: We lead with kindness. Our best work happens when we act in service of others. Constant Curiosity: We are eager to learn, grow, and explore beyond the obvious. Act with Agility: We welcome change; it’s the only constant. We embrace, adjust, adapt. Passion for Positivity: We greet each day with warmth and possibility. Collective Ambition: We have high aspirations that are achieved when weDaily Instruments Corporation
Houston, TX 77040 • (22.4 miles) • Full Time • 11/12/2026
NDT Inspector General Summary The Nondestructive Testing Inspector will independently perform inspections utilizing various advanced NDT techniques seeking corrosion, defects, or detrimental conditions in accordance with specific written criteria. The NDT Inspector will perform inspections, interpret indications, and report results per company requirements. The Technician will be able to communicate processes, procedures and results to customers. Essential Job Functions Maintains a safe, secure and healthy environment Strictly adheres to QA standards and practices and to sales order, engineering requirements Performs all QA Inspections, Testing, calibration duties as assigned. Assist non-certified inspectors, or inspections new hires on the job site. Maintains advanced NDT certification. PStress Engineering Services Inc.
Houston, TX 77041 • (23.4 miles) • Full Time • 11/12/2026
Mechanical Test Engineer in Waller, Texas. Do you enjoy answering complex engineering questions through hands-on testing, data analysis, and real-world experimentation? Are you the type of engineer who would rather build a test, collect the data, and find the answer than debate the theory? As a Test Engineer at SES, you’ll turn complex questions into meaningful data. This role blends mechanical engineering fundamentals with hands-on testing and system operation in a dynamic, industrial laboratory environment. You’ll plan and execute custom tests, design fixtures and methods, instrument hardware, collect high-quality data, and transform results into clear, actionable insights. Projects span transportation systems, aerospace components, oil and gas equipment, industrial processes, mechanicalWorldwide Oilfield Machine
Houston, TX 77041 • (23.4 miles) • Full Time • 11/12/2026
Who We Are Worldwide Oilfield Machine (WOM) is a premium flow control and pressure containment systems manufacturer. Our employee-driven company exists to partner with relevant stakeholders in local communities in which we operate, delivering reliable, innovative, cost-efficient, and climate-conscious solutions to our customers’ business needs. We strive to improve the quality of life for the people in our global communities through intentional investments in education, paving the way for future generations. What We Do WOM leverages its four decades-strong design, engineering, and manufacturing expertise with an agile, solutions-driven approach to answer your most challenging equipment needs involving: Flow Control Pressure Containment Hydraulic Fracturing Subsea Production We are hiring aBen & Jerry's - Primo Partners
Houston, TX 77005 • (34 miles) • Part Time • $11 to $17 / yr • 11/12/2026
Catering Lead Working at Ben and Jerry’s is about making people happy with lots of Ice Cream! It’s about being independent, having fun, making new friends and earning extra dough. As a Ben & Jerry’s team member, you are the smiling face that greets and serves clients. Working with us will give you the fun and financial rewards you are looking for. You’ll learn new things, get recognized and learn everlasting skills. Established in 2008 by lifelong friends, Primo Partners is locally owned and operated in Houston. TX. It all started with a single scoop shop and has since grown to multiple shop locations, along with booming, trailblazing, and system-leading Off Premise Catering in ten states in the southeast. We are seeking the perfect fit for this part-time and on call position on our cateriAmerican Jereh International Corporation
Houston, TX 77049 • (34.7 miles) • Full Time • 11/12/2026
Position Summary The Instrumentation, Controls & Electronics (IC&E) Technician is responsible for the inspection, testing, calibration, troubleshooting, commissioning, and operational readiness of mobile gas turbine generator packages. This hands-on position supports newly manufactured, refurbished, and serviced equipment by ensuring instrumentation, electrical, controls, and auxiliary systems are properly installed, tested, and ready for deployment. The IC&E Technician works closely with Engineering, Production, Quality, and Field Service teams to support safe, reliable, and high-quality equipment delivery. Key Responsibilities Perform pre-commissioning inspections, point-to-point checks, calibration, loop checks, functional testing, startup/shutdown activities, load testing, and FactoryCamin Cargo Control Inc.
Houston, TX 77015 • (37.4 miles) • Full Time • 11/12/2026
Junior Petroleum Inspector Company Overview Camin Cargo is a leading provider of inspection, testing, and certification services in the oil and gas industry. We are committed to ensuring the highest standards of safety, quality, and compliance for our clients worldwide. We are seeking an energetic Junior Petroleum Inspector to join our team and contribute to the success and growth of the organization. Position Summary The Junior Petroleum Inspector is responsible for conducting inspections and tests of various petroleum products to ensure compliance with industry standards and regulations. This role plays a crucial part in maintaining product quality and safety throughout our operations. This entry-level position provides a valuable opportunity for individuals looking to start their careerG-3 Chickadee Purchaser LLC
Houston, TX 77017 • (39.3 miles) • Full Time • 11/12/2026
Job Description G-3 Chickadee-formerly part of Goodyear Chemical-is undergoing a major transformation. As a newly independent, Private Equity–backed organization, we are modernizing our infrastructure, implementing new systems (SAP, MES, cybersecurity), and building a strong operational foundation for continued growth. Local candidates preferred due to proximity to the worksite and interview/ onboarding logistics. Relocation is not available. We are seeing a Process Control Technician to ensure the safety, reliability, & effectiveness of the various Process Control Systems in the Houston facilities (including the Distributed Control System (DCS) and Programmable Logic Controllers (PLC)). The PCT will develop and implement plans for Process Control within their respected facility with a foc