Baytown, TX 77521 • (30.5 miles) • Full Time • 9/10/2026

SummaryAssist machines operators, handle product, visually sort and inspect, pack material. Unload and move material. Assist with all tasks within fabrication shop as needed.Areas of responsibilities may include but are not limited to:Cuts, joins, jackets, etc. materials to produce sub-assemblies or finished product from raw materialsTrack production on work orders and notify leadership of any mechanical or material issuesAttach appropriate labels and tags to products and packagesMove parts into position, manually or with forklift or pallet jackSet up face blocks, jigs and fixturesMark reference points onto floors or face blocks and transpose them to workpiecesUnload pallets and move material within fabrication shop as neededMaintain a clean and safe work areaEducation, Skills, Experience,

Houston, TX 77034 • (32.9 miles) • Full Time • 9/10/2026

Description: The Injection Molding Process Technician is responsible for operating and maintaining injection molding machines to produce high-quality plastic parts. This role requires a strong understanding of plastics processing principles and a commitment to safety and efficiency.Responsible for establishing and maintaining robust injection molding processes providing customers quality parts; on time within the quoted cycle time and set labor standards.Responsible to establish plans and goals on quarterly basis.Helps to lead continuous improvement with focus on production efficiency, scrap and organization.Responsibility to mentor Setup Technicians including, but not limited to daily priorities, training, and procedures.Responsible to aid in facility manufacturing engineering, including

Katy, TX • (32.9 miles) • Full Time • 9/10/2026

Summary:The Service Technician (I) is responsible for the qualified delivering of installation, trouble shooting, repair, and other services for the standard range of VAHLE electrification and automation products and services for our customers at VAHLE as well as at onsite locations. The Technician supports and help develop relationships with the customer onsite and offsite e.g. by proactively searching for opportunities to provide VAHLE solutions and services that optimize the customer’s operations. Thus, the Technician indirectly contributes to the profitable growth of VAHLE Inc. business. Furthermore, the Technician might be responsible to functionally lead, supervise, or train a team of (third party) Technicians onsite.Must be able to travel 75% of the time- domestic and sometimes inte

Houston, TX 77059 • (34.9 miles) • Full Time • 9/10/2026

Senior CNC MachinistHouston, TXAbout Intuitive MachinesIntuitive Machines is an innovative and cutting-edge space company making cislunar space accessible to both public and private customers. Our mission is to further science and exploration, communications, and economic progress from the Earth to the Moon and beyond. With the first commercial lunar landing in history, multiple NASA lunar missions in development, and additional private missions on our manifest, we pride ourselves in supporting our customers and the nation in paving the way to return humans to the surface of the Moon. Our world-class team includes experts in all aspects of spacecraft subsystems design, development, and test, on-orbit operations, and safety.We are seeking a talented and experienced Senior CNC Machinist to j

Houston, TX 77058 • (38.6 miles) • Full Time • 9/10/2026

The Cryogenics Mechanical Engineer will support the space program located in Houston, Texas (77058). We need your talent, teamwork, and energy to help us achieve great things that inspire people all over the globe. We need you to bring creative ideas and diverse backgrounds to help us envision, shape, and deliver systems that will enable the exploration of space while benefiting people here on Earth. We are excited about what we do, and we need you on our team as we take on exciting challenges for NASA's pursuits in deep space exploration. As NASA's largest engineering solutions provider working together with NASA at centers across the United States. RESPONSIBILITIES:Perform engineering design and analysis for cryogenic components, vacuum jacketed and warm piping systems, and associated me

Houston, TX 77015 • (24.1 miles) • Full Time • 9/10/2026

Quality Wash Solutions (QWS®) specializes in tank wash services for chemical tank trailers. QWS’s experts ensure that each tank wash is completed safely and efficiently, allowing drivers to get back on the road with the confidence that their trailer is ready for the next haul.We are looking for an energetic, reliable Industrial Maintenance Technician to join our team in Houston, TX We are a dynamic, stable and growing company. We have great long term career opportunities across our headquarters, trucking terminals, mechanic shops, depots, tank washes and other locations. If you want to join the industry leader and make a difference, please consider this opportunity and apply at QWSTankwash.com.Compensation and IncentivesWeekly Competitive PayReferral ProgramEmployee benefits: Discounted pr

Spring, TX • (0 miles) • Full Time • 9/10/2026

About CarvanaAt Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Using our Carvana Certified 150-point inspection process, we're able to verify that every vehicle meets our rigorous mechanical and cosmetic standards.We strive to provide only the highest quality vehicles to our customers in our mission to deliver a no-hassle, better car buying experience. We are actively looking for passionate and talented individuals who can help us deliver on that promise.Think you've got

Houston, TX 77073 • (4.4 miles) • Full Time • 9/10/2026

About the Role:BASS Corrosion Services, Inc., is seeking a full-time Cathodic Protection Engineer (PE) to support and expand our cathodic protection design services. BASS is a full-service contractor specializing in cathodic protection and corrosion control solutions for pipeline, utility, industrial, power generation, and infrastructure clients.In addition to construction and installation services, BASS provides technical support including annual surveys, rectifier inspections, atmospheric corrosion assessments, cathodic protection system evaluations, interference testing, and integrity-related consulting services.BASS routinely provides cathodic protection design services for new pipeline systems, facilities, tanks, and other infrastructure. We are also a trusted partner in developing pr

Houston, TX 77064 • (13.7 miles) • Full Time • 9/10/2026

Purpose of the position Automation Mechanical Engineer:The role encompasses responsibilities such as equipment maintenance, technical renovation, and automation upgrades. Its contributions lie in ensuring the efficient operation of equipment while driving cost reduction and efficiency improvements for enterprises through innovation and team collaboration, thereby promoting industrial upgrading. Duties and Responsibilities 1. Responsible for daily maintenance, calibration, repair, and anomaly resolution of fixture and equipment to ensure stable operations. Examples include: Developing preventive maintenance plans to reduce sudden failures and responding promptly to production line stoppages. 2. Participates in fixture and equipment retrofit, introducing new fixture and equipment, and optimi

Houston, TX 77040 • (15.5 miles) • Full Time • 9/10/2026

CSAT Solutions is seeking a highly skilled Senior Quality Process Engineer to join our Quality Engineering team. This role will focus on ensuring the quality, reliability, and performance of laptops, main logic boards (MLB), and LCD assemblies. The ideal candidate is detail-oriented, process-driven, and passionate about continuous improvement in a high-paced technical environment.Role and ResponsibilitiesDevelop, apply and maintain quality requirements of products during process design through productionPerforms statistical analysis of processes, through the use of trend charts, control charts, Pareto diagrams, and fish bone diagrams for application in continuous improvement effortsPerforms reject analysis and reject verification to provide feedback to Operations and Engineering for the pu

Houston, TX 77040 • (15.5 miles) • Full Time • 9/10/2026

Join PBS Engineers and Help us Transform The IndustryAre you a driven professional seeking new challenges while advancing your career? PBS Engineers is looking for talented individuals to join our team and help us deliver exceptional service to our clients. If you thrive in a collaborative environment and are passionate about providing top-tier engineering solutions, you belong at PBS.As a dynamic firm committed to quality and excellence, we see our team as a family and prioritize the professional growth of each member. Our unwavering dedication to superior engineering has earned us extensive experience across diverse market sectors. With offices in San Dimas (Headquarters), San Diego, Orange County, Los Angeles, Santa Clara, Houston, and Seattle our engineers work closely with our Princip

Jersey Village, TX • (16.4 miles) • Full Time • 9/10/2026

CNC Programmer Location: Jersey Village, TXWork Arrangement: On-siteEmployment Type: Full-timeCompensation: $25-$35/hourPosition Summary Our client is seeking an experienced CNC Programmer with strong Mastercam skills to create and optimize CNC programs from customer drawings. This is a hands-on programming role within a job shop environment serving the oil & gas industry, with exposure to AS9100-certified manufacturing and both small and large precision-machined components.The ideal candidate is self-motivated, detail-oriented, and able to work closely with machinists, supervisors, quality, and other production personnel to ensure jobs are programmed efficiently and correctly. Fanuc controls experience is required, as all machines utilize Fanuc controls.Key Responsibilities Create and mod

Conroe, TX 77301 • (17.4 miles) • Full Time • 9/10/2026

Plant Asset Reliability & Fleet Compliance Manager Employer: Thompson Pipe GroupJob Function: Maintenance Is this you? Do you thrive leading multi-trade teams across mechanical, electrical, hydraulic, pneumatic, and welding work?Can you keep a DOT-regulated fleet compliant while boosting plant uptime?Do you enjoy organizing work digitally (MaintainX or similar) and driving 5S culture?Are you confident coaching technicians, conducting performance reviews, and holding high safety standards? What you’ll do Lead, schedule, and direct Maintenance Mechanics/Technicians; set priorities and allocate labor efficiently.Coordinate preventive and corrective maintenance; create, assign, and track work orders in a CMMS (e.g., MaintainX).Oversee DOT fleet compliance; manage heavy equipment maintenance an

Houston, TX • (19 miles) • Full Time • 9/10/2026

CNC Machine OperatorJob Type: Full-TimeDepartment: Manufacturing / ProductionPosition SummaryWe are looking for a dependable and detail-oriented CNC Machine Operator to join our manufacturing team. The CNC Machine Operator will be responsible for operating CNC machinery to produce parts and components according to established specifications, drawings, and quality standards.The ideal candidate is mechanically inclined, comfortable working with precision equipment, and committed to maintaining a safe and productive work environment.ResponsibilitiesOperate CNC machines safely and efficiently according to production requirements.Load and unload materials and finished parts from CNC machinery.Monitor machines during operation and make basic adjustments as needed.Read and interpret blueprints, w

Houston, TX • (19 miles) • Full Time • 9/10/2026

Service Technician Location: Houston, Texas Territory: Texas & Louisiana Travel: 85–90% Hire Type: Direct Hire Compensation: $75,000–$85,000 annually Overview We are seeking a mechanically skilled Service Technician to support customers throughout Texas and Louisiana. This position will serve as a key technical resource for industrial manufacturing customers, providing hands-on troubleshooting, preventive maintenance, equipment optimization, product demonstrations, and operator training. The ideal candidate is a strong problem-solver who enjoys working directly with customers, is comfortable traveling extensively, and has the mechanical aptitude to diagnose and resolve equipment issues in a manufacturing environment. This is an excellent opportunity for someone with industrial machinery, m

Houston, TX • (19 miles) • Full Time • 9/10/2026

1SLBJP00004167Job Title: DCN Mechanical DesignerLocal Houston Candidates OnlyA Hybrid work model - In Office on Monday and Wednesday and every other FridayPay Range $45 - $63/hrComputer Skills:Mastery knowledge and proficiency in:Microsoft Office 365 Suite (Outlook, Word, Excel, PowerPoint, Teams, SharePoint)PDF Editor (Adobe, Foxit, or other equivalent)Solid Works (required)Autodesk AutoCADNavisworks Manager / FreedomJob descriptionThe role of Mechanical / Structural Designer is to support the Engineers and Engineering Manager in providing 3D models, drawings and equipment BOM as per customer requirements independently.The Mechanical / Structural Designer will support the service personnel in solving problems by simulating the problems in drawings. The Mechanical / Structural Designer wil

Houston, TX • (19 miles) • Full Time • 9/10/2026

Who We Are: Venus Aerospace is revolutionizing rocket engine propulsion. With the first generational leap in rocket engine technology since Apollo, our proprietary Rotating Detonation Rocket Engine and Venus Detonation Ramjets deliver historic efficiency and performance across aerospace applications. We are building the next generation of propulsion platforms that enable breakthrough capabilities in space, defense, and commercial high-speed flight. Our team thrives on solving the toughest engineering challenges and pushing the boundaries of what’s possible in aerospace. At Venus, we’re looking for bold engineers and innovators who want to make history and redefine the future of propulsion. The Role: CNC Programmer This is a hands-on, high-impact opportunity for an experienced CNC Programm

Houston, TX • (19 miles) • Full Time • 9/10/2026

Way Engineering is seeking a Project Manager to join our team! Way Engineering is one of the nation’s largest and most experienced mechanical contractors. We specialize in commercial air conditioning, plumbing, piping, and the maintenance of these systems. Way Engineering is at the forefront of design-build/design-assist, pre-construction, commissioning, building information modeling, and quality control. Requirements:Preferred to have 3+ years of experience in Project ManagementMUST have commercial mechanical experienceMUST have a construction backgroundJob description:Oversee all day-to-day operations for project(s) assigned.Attend turnover meetings between Estimating and Operations for the projects you have been assigned.Schedule and conduct kick-off meetings on new projects with field

Houston, TX • (19 miles) • Full Time • 9/10/2026

Mechanical AssemblerJob Type: Full-TimePay Rate: $20–$21Schedule: Monday–Friday, with overtime as neededLocation: OnsiteJob SummaryWe are seeking a reliable and detail-oriented Mechanical Assembler to join our manufacturing team. The Mechanical Assembler will build and assemble mechanical components and equipment according to blueprints, drawings, work instructions, and established quality standards.Essential Duties and ResponsibilitiesAssemble mechanical components, parts, and equipment using hand and power tools.Read and interpret blueprints, engineering drawings, diagrams, and work instructions.Use hand tools, power tools, torque wrenches, drills, wrenches, screwdrivers, and other assembly equipment.Measure and verify parts using tape measures, calipers, gauges, and other measuring inst

Houston, TX 77049 • (21.1 miles) • Full Time • 9/10/2026

Job PurposeThe role of the “Industrial Mechanic III” position requires high level mechanical skills to inspect, install, repair and adjust all manufacturing equipment within the facility. It also requires advanced knowledge in fluid power and pneumatic equipment. This includes simple to complex hydraulic systems (w/ some servo components), plant utilities such as high volume water pumps and air compressors. The position also requires high level communication and problem solving skills.Duties & Responsibilities• Maintain a good working relationship with Operating personnel in order to maximize equipment reliability and uptime.• Analytically troubleshoot and resolve mechanical malfunctions back to OEM Specifications.• Routinely check the performance of mechanical equipment.• Properly maintai

Houston, TX 77021 • (25.2 miles) • Full Time • 9/10/2026

JOB SUMMARYThe Senior QA Specialist serves as a Quality subject matter expert and trusted partner to Laboratory Operations, Clinical, Regulatory, Technology, Product, Customer Experience, and other cross-functional teams. The role is expected to identify systemic quality risks, influence stakeholders, and translate quality data into actionable improvements that strengthen patient safety, regulatory compliance, operational performance, and customer experience. This role ensures alignment with company values and mission while maintaining compliance with relevant regulations and standards.KEY RESPONSIBILITIESQuality Management System· Independently execute and oversee assigned elements of the Quality Management System.· Interpret and apply applicable quality and regulatory requirements, inclu

Houston, TX 77061 • (28.7 miles) • Full Time • 9/10/2026

Electrical Engineer III Important: This position is based in our Houston, TX office near Hobby Airport, and both the position and interview process require candidates to be available to work and interview in our Houston office. This is a primarily hands-on role supporting our engineering, laboratory, and manufacturing operations.About the Role Heath Consultants is seeking an experienced Electrical Engineer III to join our Product Engineering team. In this role, you will play a key part in the design, development, testing, and support of sophisticated embedded electronic instrumentation and systems used in the natural gas utility industry.This is a hands-on engineering position for someone who enjoys working across the boundaries of electronics, embedded firmware, instrumentation, sensing,

Pasadena, TX • (31.2 miles) • Full Time • 9/10/2026

The Senior Manager, Global Process Controls & Automation provides strategic leadership for process control and automation across Celanese global manufacturing network. This role is responsible for advancing automation capabilities, establishing technical standards, and driving the implementation of process control solutions that improve safety, reliability, operational performance, and business results.LOCATION: Can be located in Manufacturing Site in the USResponsibilitiesDevelop, own, and drive the global Process Control RoadmapSupport planning & Coordination of DCS, PLC, and process control system upgrades across all Celanese sites.Support corporate strategy to achieve excellence in digital manufacturing and transformation towards Industry 4.0 including Digitalization elements linked to

La Porte, TX 77571 • (32 miles) • Full Time • 9/10/2026

Reliable and hardworking Industrial Sandblaster needed to join our production team. This role involves preparing large fabricated steel and industrial parts, such as trailers and roll-off boxes, for painting and coating. The ideal candidate will demonstrate a strong work ethic, sharp attention to detail, and a commitment to maintaining a safe shop environment. This position operates on a day shift schedule with no travel required.ResponsibilitiesPrepare surfaces of large industrial parts for painting and coatingOperate sandblasting equipment safely and efficientlyEnsure compliance with all safety protocols and regulationsInspect surfaces to maintain quality standardsHandle materials and parts throughout the processCollaborate effectively with team members to complete tasksPreferred Qualifi

Baytown, TX • (32.5 miles) • Full Time • 9/10/2026

Job Summary The Instrumentation and Electrical (I&E) Technician will install, inspect, calibrate, troubleshoot, repair, and maintain electrical, and instrumentation systems used in an industrial facility. The I&E Technician will be instrumental in the successful completion, startup, and maintenance of the Baytown UMO/HDT plant. The I&E Technician will report directly to the Maintenance Supervisor. Job ResponsibilitiesThe Instrument and Electrical Technician is responsible for maintaining, repairing, and installing instrumentation and electrical equipment.Troubleshoot (480v) motors, motor starters, VFDs, MCCs, transformers, circuit breakers, and electrical distribution systems.Read P&IDs, loop drawings, electrical schematics, wiring diagrams, cause-and-effect charts, and equipment manuals.C

Houston, TX 77034 • (32.9 miles) • Full Time • 9/10/2026

Ready for a handson challenge? Do you like seeing the results of your work moving off the lineprecise, clean, and packaged to spec? Imagine this scenario: a press completes its cycle, you open the gate, remove the part, trim with care, and run a fast inprocess check against the MCP. If something’s off, you apply secondary processing or rework to bring it back into spec. You keep the line flowing and jump in to help nearby stations when they need a hand. Your Mission Operate molding equipment as assigned; open gates, remove and trim parts, and verify quality before packing.Perform inprocess inspections per MCP and complete secondary operations and rework when required.Record performance metrics every shift: good parts, scrap, and downtimewith the intent to beat targets.Package finished good

Webster, TX 77598 • (39.1 miles) • Full Time • 9/10/2026

KULR Technology Group is a publicly traded company (NYSE: KULR) with a vibrant startup dynamic, headquartered in Houston, TX Our mission is developing energy management platforms to accelerate the global transition to a circular electrification economy. We create sustainable solutions that benefit humanity using space proven engineering, making the world of batteries and electronics cooler, lighter, and safer. We operate in four verticals: e-mobility, environmental/energy storage, industrial/consumer tools, and aerospace/defense. Our technologies have been deployed by NASA, including applications on the Space Station and Mars Rover.Job Title:Mechanical Engineer IFLSA Status:ExemptSalary:$72,000 - $85,300Reports to: Sr. Engineering Manager, Advanced ProgramsLocation:OnsiteKULR Technology Lo

Spring, TX 77382 • (13.6 miles) • Full Time • 9/9/2026

Reports To: General ManagerEdit Holdings LLC dba Tide Cleaners is seeking hardworking, team-oriented, and reliable individuals to join our dry-cleaning clothing presser team. This position does not require any prior experience within the dry-cleaning industry but does require a commitment to learn and work within a team atmosphere.Duties & Responsibilities:Demonstrate company core values at all times: Guest Services, Excellence, Committed, Integrity, and Top QualityKnow the basics of pressing and be able to adapt to the challenges of properly finishing new and seasonal fashion styles and fabrics.Accurately but efficiently iron and press clean articles by hand or by machine steam and vacuum.Learn the basic operations of the pressing station(s) they will operate, and the particulars of the i

Houston, TX 77092 • (16.8 miles) • Full Time • 9/9/2026

Description: Are you a motivated person with a can-do attitude? If so, we’d love to have you join our team!What can we offer you?:Competitive Wages;Paid Time Off (begin accruing on your very first day of employment!);Monthly incentive program;Medical, dental and vision benefits;401K;Uniforms;Employee Discounts with Best Buy, Verizon, Expedia and more!Commercial Truck & Mobile Repair is growing and that means new career opportunities! Join us and be part of an iconic family of companies with a great culture, unmatched co-worker camaraderie and plenty of development opportunities! At Commercial Truck & Mobile Repair our top priority if having employees who can live up to the demanding expectations of our customers and markets. We believe our employees, who bring their hard work and dedicatio

Houston, TX • (19 miles) • Full Time • 9/9/2026

What Cognite is: Relentless to achieve Cognite operates at the forefront of industrial digitalization, building AI, and data solutions that solve the world's hardest, highest-impact problems. With unmatched industrial heritage and a comprehensive suite of AI capabilities, including low-code AI agents, Cognite accelerates the digital transformation to drive operational improvements.We thrive in challenges. We challenge assumptions. We execute with speed and ownership. If you view obstacles as signals to step forward - not backwards - you'll feel right at home here.Our Moonshot is bold: Unlock $100B in customer value by 2035, and redefine how global industry works. Join us in this venture where AI and data meet ingenuity, and together, we will forge the path to a smarter, more connected indu

Houston, TX • (19 miles) • Full Time • 9/9/2026

Salary $110k-$125/130k w/ 20% bonus yearly and relocation.Electrical Engineer The Manufacturing Electrical Engineer supports the design, installation, optimization, and maintenance of electrical systems in production environments, ensuring equipment reliability, efficiency, and compliance with safety and quality standards. Role Overview The electrical engineer is a hands on position and will be required to be in the manufacturing area. They will not sit behind a desk all the time. 10-20%travel to manufacturing facilities in Arizona, Tennessee, Missouri, Kentucky, Florida, North Carolina, and Pennsylvania as needed. Key ResponsibilitiesDesign, troubleshoot, and maintain electrical systems for manufacturing equipment and production lines.Support automation systems including PLCs, HMIs, senso

Pasadena, TX 77507 • (35.7 miles) • Full Time • 9/9/2026

Description: About Ethox ChemicalsEthox Chemicals, a privately held chemical manufacturing company with 190+ employees and part of the long-established Syntha Group, has built its reputation since 1968 on delivering quality chemical products and personalized customer service. The Syntha Group was founded in 1938 and now spanning five subsidiaries, focuses on innovation, custom manufacturing, and strong customer partnerships across formulation, R&D, sales, and distribution. As part of its continued growth, Ethox Chemicals is opening a new chemical plant on a 17-acre site in Pasadena, Texas, and is hiring a Industrial Electrician for its maintenance department.Position SummaryThe Industrial Electrician is responsible for performing electrical troubleshooting, predictive / preventative mainte

Houston, TX 77032 • (7.1 miles) • Full Time • 9/9/2026

Pay Range: $23.00 - $23.07 Per HourFree meals, uniforms and laundering service available at select locations.We Make Applying Easy!Want to apply to this job via text messaging? Text JOBto 75000and search requisition ID number1566970.The advertised program is an AI recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: http://olivia.paradox.ai/moSkgDiversityof thought and inclusion for all is what drives our success - we invite you to start your journey with us today!What makes FLIK click?Our people. The decisions, actions and attitudes of our associates earn the trust and loyalty of our clients every day. We know how to pick them and we know how to grow th

Spring, TX 77379 • (9.1 miles) • Full Time • 9/9/2026

Job OverviewReeder Distributors is seeking a reliable and mechanically inclined Air Compressor Technician to join our Equipment Service team in Spring, Texas. This position is responsible for servicing, troubleshooting, repairing, and maintaining air compressor systems primarily within automotive dealership and service environments. The Air Compressor Technician will also support the maintenance and repair of additional automotive shop equipment, including vehicle lifts, fluid distribution systems, and related equipment.The ideal candidate will have strong mechanical aptitude, excellent troubleshooting skills, and the ability to work independently in the field while providing exceptional customer service. This position is well suited for someone who enjoys hands-on mechanical work, solving

Spring, TX 77381 • (10.8 miles) • Full Time • 9/9/2026

"Bridging Innovation to Cure"Developing and manufacturing your cell therapies from benchtop to bedside"SummaryCellipont Bioservices is growing, and we are looking for a Manufacturing Supervisorwho believes in the potential bridging of client's discoveries to patient cures and who want to challenge the status quo and take Cellipont and its clients to the next level. The Manufacturing Supervisor will provide hands-on direction for manufacturing personnel and activities. This position requires extensive technical expertise in aseptic techniques. Provide expertise in writing/reviewing SOPs, Batch Records, Deviations, CAPA's and other technical document/compliance documents as it relates to the Manufacturing Operations. The Manufacturing Supervisor is also responsible for ensuring all personnel

Jersey Village, TX • (16.4 miles) • Full Time • 9/9/2026

Our people make the difference.We are currently seeking an outstanding Shop Technician who will deliver exceptional service in our Houston / Jersey Village shop by duplicating hydraulic hose assemblies for walk-in customers. Other job duties include general labor, shop maintenance and restocking. A successful candidate will have good communication skills with our customers, and their supervisor/team members.Benefits & Perks:Competitive CompensationOpportunity for performance bonuses (monthly & quarterly)40 hours per week plus overtimeUniform allowance401K Retirement PlanMedical, Dental & Vision InsurancePaid HolidaysPaid Time OffCell phone reimbursementTraining provided and solid support networkTools and specialty tools providedRequired:1-3 years of general work experienceProvide excellent

Cypress, TX 77429 • (17.2 miles) • Full Time • 9/9/2026

About Us: Drake is a high-tech manufacturing company based in Cypress, Texas. We proudly serve leading customers across aircraft, space, energy, semiconductor, defense, medical, and other highly regulated industries.We work in a collaborative, supportive environment where employees are valued, empowered, and provided opportunities for hands-on learning and professional growth. At Drake, customers are our focus, and we build success together.Position Summary: The CMM Operator supports the effectiveness of the quality management system by ensuring products, processes, and documentation meet customer, engineering, regulatory, and company requirements. This position works closely with Quality and Manufacturing to support inspections, investigate quality issues, maintain accurate records, and p

Houston, TX 77028 • (17.3 miles) • Full Time • 9/9/2026

CNC Journeyman Machinist Location: 6525 Homestead Road, Houston, TX 77028 Work Hours: 6:00 AM to 2:30 PM, Monday through Friday Competitive CompensationMake the Right ConnectionBuild Your Career with Dixon!Dixon Holedall, a proud division of The Dixon Group, is seeking a skilled CNC Journeyman Machinist to join our manufacturing team in Houston, TX! This is an excellent opportunity for a highly experienced machinist who takes pride in craftsmanship, precision, and continuous improvement. In this role, you will work with advanced CNC (Computer Numerical Controlled) and manual equipment to produce high-quality components in a safe, efficient, and team-oriented environment.We're looking for a seasoned manufacturing professional with 10+ years of hands-on experience who can confidently program

Houston, TX 77028 • (17.3 miles) • Full Time • 9/9/2026

*Benefits Eligibility: This position is eligible for benefits beginning the first of the month following your hire date.*Recruiting Agencies: Thorpe Specialty Services does not accept unsolicited resumes from recruiting agencies.General SummaryCraftsman have a solid background in specialty craft work within an industrial environment and be capable of working independently and leading small teams. A Craftsman will take on tasks such as fabrication, installation, and repair of specialized industrial systems or equipment.Role and Responsibilities• Independently fabricate, install, and maintain specialty systems and equipment, according to project specifications.• Read and interpret blueprints, schematics, and technical drawings to plan and execute tasks with precision.• Use advanced hand tool

Houston, TX 77041 • (18.2 miles) • Full Time • 9/9/2026

Pay: $14.39 - $18.71 per hour Depending on experienceJob description:All shifts available! 1st, 2nd, and 3rdOverviewWe are seeking a skilled and dedicated Warehouse Associate to join our dynamic manufacturing team. This role requires mechanical knowledge and the ability to work effectively in a fast-paced environment.ResponsibilitiesOperate and monitor production equipment.Perform setup and adjustments on machinery to ensure optimal performance.Conduct visual quality control checks.Collaborate with team members on assembly line tasks, ensuring efficient workflow and materials handling.Maintain a clean and organized work area in compliance with safety standards.RequirementsExperience in a manufacturing or factory environment is preferred.Ability to work collaboratively within a team while a

Houston, TX 77041 • (18.2 miles) • Full Time • 9/9/2026

Custom Air Products & Services, Inc. (CAPS)is a Houston-based, full-service HVAC company specializing in the design, fabrication, installation, and servicing of industrial and commercial air conditioning and heating systems. Since 1996, CAPS has built a reputation for delivering high-quality, custom-engineered solutions to customers across a wide range of industries.With a team of skilled professionals and multiple Texas-based facilities, CAPS provides end-to-end capabilities including HVAC manufacturing, mechanical field services, and parts distribution. As part of AirX Climate Solutions, we are committed to safety, quality, and customer satisfactioncreating a team-oriented environment where employees can grow, contribute, and support essential operations across the industries we serve.We