Pay starts at $18.00 an hour and goes up depending on experience.
Our ideal candidate should have previous experience as a mechanic/technician in the trailer industry. Carpentry, welding and mechanic skills are a plus. We are looking for a self-motivated person with strong work ethics. We are willing to train the right applicant.
Duties will include: Read and understand the jobs and work order per company standards Preventative maintenance and repair all systems on Semi-Trailers to meet the standards set forth by DOT Remove and replace brakes, brake drums, hubs, seals, bearings, races and associated parts Repair electrical and lighting systems Repair or replace chassis components such as springs, spring hangers, equalizers, complete slider assemblies, axles, and sub frames Repair mud flap brackets and dolly leg assembles Repair or replace flooring, rub rails, doors and door trim Repair roofs, panels, nose panels, lower and upper rails Conform to all safety and health standards Assist fellow mechanic technicians
Benefits: Paid time off Paid holidays 401 Medical, Dental, Vision Life Insurance Long and Short Term Disability
Requirements: 1 - 3 years of experience in trailer repair or equivalent experience with welding, carpentry, and mechanic skills Valid driver’s license with a safe driving record. Must furnish own basic hand tools. Ability to stand, walk, bend, crouch, stoop, reach, stretch, step, climb, and / or sit frequently and lift heavy (up to 60lb) throughout the duration of the day Ability to work independently with minimal supervision Attention to detail and highly organized

Direct hire for a Full Time, onsite Equipment Service Mechanic to maintain our Fleet of Electric Forklifts, Pallet Jacks, and Floor Scrubbers for Amigos Meat Distributors Houston Facility. About 90% of our Forklift / Pallet Jack Fleet is electric, and 10% propane powered. The ideal candidate will be able to Troubleshoot, diagnose, and repair Crown models. Includes propane, electric motors, small motors, transmissions, drive axles, differentials, hydraulic systems, brake systems, steering systems, electrical systems, and lifting systems.
Salary range of $800/wk to $1000/wk depends on demonstrated knowledge, skills, abilities and verifiable work experience.
This is an immediate need, direct hire position with Amigos Meats. Your résumé goes directly to the hiring manager. All qualified candidates will be contacted.
Job Responsibilities include but are not limited to: Troubleshoot, diagnose and repair all Fleet Equipment Perform all assigned planned equipment maintenance services Maintain a service log and equipment cabinet of inventory Process paperwork after completion of each job Perform regular routine equipment inspections to identify potential problems and safety concerns and document. Manage your time and work schedule
Schedule: 8-hour shifts M-F Day shifts Weekends (work every other Saturday 8a-12p)
Benefits: Full Medical Dental Vision 401K w/ co. match Vacation Time Sick Time Holiday Pay Short-Term/Long-Term Disability
Qualifications: Minimum 2 years experience as a Forklift repair technician, GSE Technician, or small engine repair technician. Good Mechanical and electrical aptitudes, knowledge of electrical and electronic systems, internal combustion engines, and hydraulic systems. Good written/verbal communication and customer care skills Valid driver's license, good driving record and ability to safely operate lift trucks. Technical degree, previous forklift repair experience, welding experience and knowledge of various types of testing equipment preferred. Salary offered commensurate with knowledge, skills, abilities and verifiable work experience.
Amigos is an Equal Opportunity Employer.

The Time is Now! Start Your Career with the Houston Fire Department.
Per Chapter 143.023 of the Texas Local Government Code: A person may not take an entrance examination for a beginning position in the fire department unless the person is at least 18 years of age but not 36 years of age or older. A person may not be certified as eligible for a beginning position in the fire department if the person is 36 years of age or older.
Minimum requirements:
Fifteen (15) accredited college credit hours OR Two (2) years of full-time active military service with an honorable discharge as stipulated on a DD214 Member 4  Certified Applicants: Must meet one of the above requirements and have active Fire and EMT Certifications
Applicant must meet the above requirements by the Civil Service Exam date. Participates in classroom lectures, seminars, and practical training sessions as directed by the Houston Fire Department. Receives and participates in various types of training in fire suppression and emergency medical services up to and including paramedic certification. Participates in drills, demonstrations, and instruction in hydraulics, pump operation, maintenance, fire suppression, rescue, and emergency medical services. ONLY “on-line” applications will be accepted. On-line applications will be accepted until all testing slots are filled. 
Exam Information: Dates: 11/01/24, 12/06/24, 02/07/25, 03/07/25, 04/04/25, 05/02/25, 06/06/25 Time: 7:30 AM and/or 12:30 PM Location: Val Jahnke Training Facility, 8030 Braniff St, Houston, TX 77061. Bring your driver’s license or other photo ID. Due to the high volume of applications received, you will be contacted directly via email, should you qualify to take the exam. You will receive an email with the date to report to the testing site for the exam.
Benefits: Medical Dental Vision Wellness Life insurance Long-term disability Retirement pension 457 deferred compensation plan Employee Assistance Program 10 days of vacation each year 11 city holidays, plus one floating holiday Flexible schedules Professional development opportunities Transportation/parking plan Section 125 pretax deductions Dependent Care Reimbursement Plan Healthcare Flexible Spending Account
Qualifications: Immunizations/shot records will be required prior to starting the training academy. The minimum passing score is 70 percent on the written examination before the extra five (5) points for qualified veterans are added. Per Chapter 143.025of the Tex. Loc. Gov’t Code, an additional five points shall be added to the examination grade of an applicant who served in the United States armed forces, received an honorable discharge, and made a passing grade on the examination. Applicants who are eligible for extra military points must scan and attach a copy of their DD214 (Member-4) to their electronic application or send a copy to hfdhiringprocess@houstontx.gov. The last day to submit a DD214 is the date of the Civil Service Exam. No DD214s will be accepted at the test site. Texas Commission of Fire Protection State Fire Fighters Certification and Texas Department of State Health Services (TDSHS) Emergency Medical Technician Certification(s) will be subject to verification by the Human Resources Department. Texas Department of State Health Services Emergency Medical Technicians Certification as a Paramedic will be subject to verification by the Human Resources Department. An applicant may not take the examination for an eligibility list more than once. The eligibility list created as a result of this examination will be effective for a period of not less than 6 months or more than 12 months as determined by the Civil Service Commission. Passing applicants will be referred to the Human Resources Department Classified Careers & Services Division to continue processing. Any falsification in the application process will result in disqualification. Applicants must pass and complete all phases of the hiring process (civil service exam, physical ability test, interview, polygraph, background, immunizations, drug screen, medical examination).  HFD reserves the right to discontinue consideration in the hiring process based on an applicant conduct or verification of certain disqualifying factors.  Must not have ever been convicted of a Felony. Any Misdemeanor charge or divert/deferred adjudication or similar program may require an active TDSHS EMT certification prior to job offer. Applicants’ eligibility for hiring will be determined in rank order from the eligibility list.

T.G Meat Center is seeking to hire multiple meat cutters. This job requires a person to work in a cold refrigerated warehouse space. These are full-time positions, and we are looking to hire meat cutters with at least 1-2 years experience. Candidates that have experience cutting meat with commercial electric bandsaw are preferred. Work hours are 7am to 4pm, with occasional Saturdays and Overtime. All applicants will be contacted.
Benefits: Full Medical Dental Vision 401K Vacation Time Sick Time Holiday Pay Short-Term/Long-Term Disability
Qualifications: MUST be 18 years or older Able to utilize knives, saws, grinders and other equipment to perform meat cutting and trimming. Demonstrate the ability to identify different meat cuts. Willing to work individually as well as in a team. Maintain a safe environment- Personal Safety and Food Safety. Positive Attitude—makes everyone’s day better, including yours! Willing to learn and follow our processes. Ability to communicate verbally Be able to lift up to 60lbs Be physically able to load & unload a dolly or pallett Manufacturing experience is helpful, but not necessary.
T.G Meat Center  is a second chance employer. EOE. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Provide motor vehicle maintenance for the school bus, general purpose, and utility vehicle fleet.
Job Duties: Diagnose and repair all types of mechanical and electrical problems on school buses and all types of motor vehicles. Be the primary technician assigned to perform preventative maintenance and repairs, both major and minor for 20 School Buses and 20 Support Vehicles. Secure and maintain all assigned tools, parts and equipment. Substitute for any transportation employee as assigned by the supervisor. Maintain accurate records of all work performed. Comply with all safety measures and maintenance procedures as outlined in the department handbook. Substitute as a school bus driver when necessary. Perform other duties as assigned. Operates pressure washers, air compressor, tire machines, wheel balancer, bead setter, air jacks, air tools, grease guns and wrecker.
Qualifications: Minimum Education/Certification High School Graduate or GED. ASE Certification preferred. Must have five years experience working on trucks or buses. Must show proficiency and initiative as an expert mechanic. Possess or be able to obtain valid Class B Texas Commercial Driver’s License with all appropriate endorsements to drive a school bus within 120 days. Possess or be able to obtain valid Class A Texas Commercial Driver’s License will all appropriate endorsements to drive the district wrecker within 180 days. Be able to obtain a Vehicle State Inspection License.
Special Knowledge/Skills: Ability to read and comprehend vehicle maintenance manuals. Ability to operate all types of vehicle maintenance equipment.
The above statements are intended to describe the general purpose and responsibilities assigned to this job and are not intended to represent an exhaustive list of all responsibilities, duties and skills required.

Supervises and instructs mechanics, utility workers and cleaners in the repair, cleaning, and reconditioning of buses. Performs duties in a safe, efficient manner and in compliance with applicable rules and safety procedures.
Responsibilities and Specific Duties: Responsible for the supervision of mechanics, utility workers and cleaners and for the daily repair, cleaning, and reconditioning of buses. Supervises and instructs mechanics, utility workers and cleaners in the repair, servicing, and reconditioning of buses in assigned area. Provides technical assistance to personnel as necessary to assure quality and timely repairs. Coordinates upgrades, training and training schedule with General Foreman and Superintendent. Coordinates workflow from work area to work area. Responsible for all personnel and general administrative matters i.e., first step grievances, performance evaluations, disciplinary actions, payroll issues, etc. Maintains records of work performed and daily overtime, and absenteeism. Supervises maintenance and repair equipment, inspects tools and equipment for condition and proper use. Responsible for meeting equipment service demands in a timely manner. Ensures and maintains quality and safety standards. Research pertinent bus performance information and analyze data to determine bus down issues. Coordinates activities with Storeroom. Maintains yard control. Dispatches wreckers/T-Trucks/tire trucks for breakdown recovery and on street repairs. Keeps Superintendent and General Foreman informed on all matters of importance. Provides excellent customer service to METRO internal and external customers. Applies SMS (Safety Management System) methods and principles in daily routine and supports all aspects of the agency’s Public Transportation Agency Safety Plan (PTASP). Promotes safety awareness and follows safety procedures to reduce or eliminate accidents. Performs other job-related duties as assigned.
Benefits: Medical, Dental and Vision Insurance Competitive Pay Retirement Plan and Savings Plan Paid Vacation, Sick Days and Holidays Advancement Opportunities Life Insurance
Requirements: High school diploma or equivalent.  Additional vocational/training in heavy duty vehicle maintenance and supplementary training in body repair, transmissions, welding, electrical and/or air conditioning preferred. Minimum of 5 years extensive diesel-powered bus maintenance experience including direct mechanical/journey experience.  2 years previous lead/supervisory experience, or successful completion of the Career Advancement Program (CAP) is required. Supervisory experience in a mechanical maintenance/shop environment is preferred. Good communications (written/verbal) and interpersonal skills. Good decision making and organizational skills. General knowledge and use of part books and maintenance manuals. Familiar with labor relations/union agreements and related procedures. Basic knowledge of personal computers and related software. A valid Texas Commercial Driver’s License with a P (passenger endorsement) is required for the job and must meet METRO’s requirements regarding motor vehicle records. The ability to drive any Authority owned vehicle. Able to maintain or obtain additional certifications/licenses as required. Applicants must successfully pass a reading, math, and mechanical assessment prior to interview.
The Metropolitan Transit Authority of Harris County, Texas has a zero-tolerance drug and alcohol policy for all employees. All internal and external applicants will be required to undergo drug testing before employment and will be subject to further drug and/or alcohol testing throughout their employment.   Further, employees who perform safety-sensitive functions will submit to drug and/or alcohol testing in accordance to the Department of Transportation (DOT) and the Federal Transit Administration (FTA) regulatory requirements.   We provide equal opportunity to all qualified individuals regardless of race, color, religion, age, sex, national origin, veteran status, genetic information or disability.

If you're newly hired into certain bus mechanic job functions and employed with METRO for at least three months, you can begin to earn an incentive of up to $8,000.
Responsibilities and Specific Duties: Have a thorough knowledge of components on METRO’s revenue vehicles and their proper function as required for selected job classification. Show a proficient knowledge and use of test equipment and specialized tools related to selected classification requirements. Independently diagnose and repair all defects to completion in a timely manner under the supervision of a Mechanical Foreman. Perform duties in a safe, efficient manner and in compliance with all applicable rules and safety procedures. The specific job classification level will be determined on qualifications and experience.  Performs Preventive Maintenance Inspections (PMI) on revenue fleet. Inspects and/or test and observe defective equipment to troubleshoot and diagnose malfunctions of major components and complete assemblies. Performs diagnosis and repair of air brake systems, suspension, steering and alignment. Proper use and interpretation of laptop computer and related software. Must be able to read and interpret refrigerant, hydraulic, and pneumatic pressure gauges and understand the proper use of battery/ charging system analyzers. Services and diagnose electrical systems utilizing test instruments such as laptop computer, ID Reader/ Writer and able to read ladder logic charts. Assists in the servicing and diagnosing of exhaust after-treatment systems and electronic engine controls. Inspects and verifies dimensions, clearances, and torque of part fasteners to ensure conformance to factory specifications. Road tests vehicles when necessary to diagnose malfunctions or to ensure that they are working properly. Completes all required reports and records in a timely and accurate fashion. Assists in work direction with mechanics as assigned. Participates in on-going training in accordance with METRO’s Maintenance Training Program. Provides excellent customer service to METRO internal and external customers. Promotes safety awareness and follows safety procedures in an effort to reduce or eliminate accidents. Performs other job-related duties as assigned.
Benefits: Medical, Dental and Vision Insurance Competitive Pay Retirement Plan and Savings Plan Paid Vacation, Sick Days and Holidays Advancement Opportunities Life Insurance
Qualifications: High school diploma or equivalent.  Graduation from a related technical school preferred. Minimum three (3) years mechanical repair experience on automotive, medium or heavy duty equipment. Automotive Service Excellence Certificates (ASE) in brakes, steering/ suspension, and/or PMI preferred. A valid Commercial Texas Driver’s License with “P” endorsement is required and must meet METRO’s requirements regarding motor vehicle records. Must obtain Texas Commercial Driver’s License within 90 days of employment. The ability to drive any Authority owned vehicle. Able to maintain or obtain additional certification/licenses as required. Possess complete knowledge of all tools and equipment in shop related to job classification. Must maintain a basic set of personal hand tools to perform repairs related to job classification with exception of specialized tools provided by METRO. Ability to complete written reports, records and forms. Must be able to speak, read and write English.
The Metropolitan Transit Authority of Harris County, Texas has a zero tolerance drug and alcohol policy for all employees. All internal and external applicants will be required to undergo drug testing before employment and will be subject to further drug and/or alcohol testing throughout their employment.   Further, employees who perform safety-sensitive functions will submit to drug and/or alcohol testing in accordance to the Department of Transportation (DOT) and the Federal Transit Administration (FTA) regulatory requirements.   We provide equal opportunity to all qualified individuals regardless of race, color, religion, age, sex, national origin, veteran status, genetic information or disability.

San Jacinto College Central Pasadena Campus is hiring an Energy Management Systems Manager for daily monitoring of Building Automation Systems, and to coordinate response to comfort concerns, provide analysis and administration of all assigned Energy Management projects and functions.
Duties include but are not limited to: Monitor the general operation of the Building Automation Systems to ensure proper operability and minimum energy consumption levels. Respond to occupant  comfort  concerns  while  ensuring compliance with campus climate guidelines. Review all monthly utility billing for accuracy. Identify, investigate, and report on all anomalies in water, gas, and electricity consumption. Provide monthly and quarterly reports on energy metrics at the individual and building level with weather normalized comparison per square foot. Manage ENERGY STAR and other Energy Benchmarking portfolios as assigned. Assist the conduct or coordinate facility site visits, retro-commissioning efforts, and ASHRAE audits (Level I & II). Maintain repair parts inventory list and order spare or replacement parts to agree service level. Work directly with the Director and procurement to create requisitions, purchase orders, and payment authorizations. Provide team level support as required to support departmental operations. This may occasionally involve working extended hours, nights, weekends, and holidays to ensure adequate functional coverage.
Benefits: We offer competitive benefits at reasonable costs through the Employees Retirement System of Texas (ERS). Benefits include medical, dental, vision, life insurance, 401K and more. Holidays off. San Jacinto College (SJC) offers a variety of voluntary retirement programs [403(b) and 457(b)] for its employees.
Qualifications: Bachelor of Science in engineering, environmental science, business, or an applicable technical degree. 1 to 3 years of experience in energy management, energy efficiency, sustainability, facility management, HVAC design, or working in a craft field such as electrical or HVAC. Valid Texas Driver’s license. Certified Energy Manager in training. Certified Energy Auditor in training TEMA Accredited Energy Manager in training. Basic Financial Management and Accounting skills. Self-motivated and quick, an adaptive learner in a changing environment. Excellent oral and written communication skills, with correct English usage, grammar, spelling, punctuation, and vocabulary. Ability to effectively communicate with varied audiences, e.g., faculties, staff, directors, consultants, and operators. Proficiency with Microsoft Office suite, including Word, Excel, PowerPoint, and Outlook.
Note: Due to the number of applications we sometimes receive, we might not be able to follow-up with every applicant individually. If your qualifications meet the requirements for the position, and you are selected for an interview, we will contact you   The San Jacinto College District is committed to equal opportunity for all students, employees, and applicants without regard to race, creed, color, national origin, citizenship status, age, disability, pregnancy, religion, gender, sexual orientation, gender expression or identity, genetic information, marital status, or veteran status in accordance with applicable federal and state laws.

San Jacinto College Central Pasadena Campus hiring an experienced HVAC Journeyman to help maintain and repair our College facilities HVAC systems and equipment in order to provide a safe and comfortable environment for students, faculty and staff.
The HVAC Journeyman is expected to maintain and repair HVAC equipment in the district. Perform preventative maintenance on equipment to ensure optimum efficiency and extend equipment life. Also, perform HVAC installation, repair and maintenance as needed. Perform preventive maintenance work as required and in the priority directed. Support and adhere to the College Safety Program. Maintain quality standards as set by the District. Check and test control circuits; check and test pneumatic control systems; diagnose HVAC problems and remove, repair and replace faulty parts. Be available for emergency after-hour work or to complete on-going projects, and be willing to respond to calls any time during a 24-hour period.
Duties include but are not limited to: Complete assigned preventative maintenance and repair work orders Perform equipment inspections to determine condition or potential problems Update material inventory for HVAC Department Trouble shoot water circulating pumps, cooling towers, air handlers, walk in coolers, walk in freezers, fan coil units, exhaust fans, split systems and roof top units Assist supervisor with water treatment systems Respond to hot and cold calls, diagnose problems and make adjustments or repairs as necessary Investigate all water leak issues within the buildings to determine the source Assist Plumbing and Electrical Departments when the need arises Other duties as assigned Carry college cell phone and on call 24/7
Benefits: We offer competitive benefits at reasonable costs through the Employees Retirement System of Texas (ERS). Benefits include medical, dental, vision, life insurance, 401K and more Holidays off San Jacinto College (SJC) offers a variety of voluntary retirement programs [403(b) and 457(b)] for its employees.
Requirements: Knowledge in maintenance, troubleshooting and repair of HVAC equipment including large centrifugal chillers, boilers, pumps and air handling units.  Ability to review and close out work orders in a computerized work order system. Knowledge in chemical water treatment systems for HVAC applications. Ability to diagnose and repair pneumatic and DDC control systems. Ability to read and interpret mechanical plans. Ability to rebuild pumps, compressors and other HVAC equipment High school education or GED Must have completed a recognized apprentice program, or have at least 5 years of experience directly related to the craft with no less than 3 years at the apprentice level.  Must be able to read and interpret electro-mechanical plans, specifications, and operational criteria and possess quality understanding of installed HVAC systems. Must have a valid Texas Driver’s License with a good driving record. May be required to successfully complete job ability testing. Preferred candidate should have at least 5 years of experience in hot water and chilled water systems of 100+ tons capacity with 2 years of experience in/or with related trades such as plumbing and electrical. Must have CFC refrigerant reclaimant certification at level 1 and 2 with a universal certification within one (1) year. State class A A/C license
Note: Due to the number of applications we receive, we are unable to follow-up with every applicant individually. If your qualifications meet the requirements for the position, and you are selected for an interview, we will contact you.   The San Jacinto College District is committed to equal opportunity for all students, employees, and applicants without regard to race, creed, color, national origin, citizenship status, age, disability, pregnancy, religion, gender, sexual orientation, gender expression or identity, genetic information, marital status, or veteran status in accordance with applicable federal and state laws.

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: Set up and operate a variety of CNC machines, primarily lathes, to produce pump parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures. NEW HIRES ARE ELIGIBLE FOR A $2500 SIGN ON BONUS! APPLY TO FIND OUT MORE! Second Shift Hours: 2:30 - 11:00 PM Responsibilities: Operating CNC Machines, primarily lather, or Equipment – Operate basic equipment and machines and carry out routine tasks.Operations Management – Carry out operational tasks by following established processes.Equipment Maintenance and Repair - Help to maintain and repair equipment by carrying out preparations and providing assistance.Health, Safety and Environment – Follow basic mandatory work instructions to safeguard the environment and the wellbeing of oneself and others.Operational Compliance – Follow a straightforward mandatory procedure to ensure that work is carried out to the required quality standards and/or to ensure adherence to external regulatory codes and internal codes of conduct.Precision Equipment Utilization – Interpret and use precision measuring equipment/instruments such as micrometers, dial indicators, and depth gauges.Instructions and Drawings – Ability to read and interpret blueprints and geometric tolerances.Internal Communications: Exchange information with people by having courteous interactions with them.Policy and procedures - Works with guidance to understand policies and procedures, while making sure they match organizational strategies and objectives.Other duties as assigned. Requirements: 5-7 years machining experience in a manufacturing or repair environment operating CNC lathes. Preferred Experience / Skills: EIA Program and Mazak TrollVerbal Communication – Uses clear and effective verbal communication skills to express ideas and request actions.Planning and Organizing – Works with guidance to plan, organize, and prioritize activities to efficiently meet business objectives .Health and Safety - Applies elementary concepts to manage and apply safe systems of work.HS Diploma / GED and 5-7 years relevant experience Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits! Req ID : R-11728 Job Family Group : Operations Job Family : OP Machining EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

Overview: Sun Auto Tire & Service operates multiple locations across Texas and is expanding! We offer complete quality automotive repair and preventative maintenance. Our ASE certified technicians will be happy to help you on a wide range of services including alignments, brake repair, oil changes, batteries, shocks and struts, belts and hoses, and air conditioning.The Master Technician / Automotive Mechanic ensures that repairs are performed correctly and efficiently by qualified technicians and that the service department maintains a consistently high level of customer satisfaction. They are also responsible for effectively and efficiently diagnosing and repairing customer vehicles while adhering to the MAP guidelines and in accordance with dealership, manufacturers, and Sun Auto Tire & Service standards. Pay: $30.00 - $45.00 flag rate Benefits: Competitive Bi-Weekly Pay Tuition Reimbursement, up to $3,000 annually Paid Vacation and Sick Time 6 Paid Holidays Medical, Dental and Vision Insurance (Effective 1 st of the Month after Hire) Life Insurance (Company paid) 401(k) Retirement Savings Plan with Company Match Discounted Services on Personal and Immediate Family Vehicles Opportunity for Advancement!!! Principal Duties and Responsibilities: Diagnoses vehicles according to the appropriate level of certifications/experience. Performs work as outlined on the Multi-point Inspection and/or Repair Order with efficiency and accuracy. Performs complex and heavy-duty repairs. Explains technical diagnosis and needed repairs to non-mechanical individuals which may include the Store Manager, Service Consultants and/or customers. Recommends services that are necessary to keep the customer's vehicle in running condition; properly documents all recommendations in customer file. Follows all safety procedures and reports any concerns to the Shop Foreman or Store Manager. Maintains appropriate ASE certifications and renewals of expiring certifications. Qualifications : Minimum of 5 years of automotive technician / mechanic experience Must be able to demonstrate the ability to properly use computerized equipment for diagnostics. Possess valid/current driver's license Current ASE's preferred Ability to work a minimum of five days, including Saturdays Working Conditions and Physical Demands: The Master Automotive Technician / Mechanic will be exposed to moderate to loud noises, dust, exhaust fumes, lubricants, petroleum products, vapors, caustic materials and other hazardous and non-hazardous materials. The temperature in the work environment varies and could include extreme heat and/or extreme cold depending on the ambient temperatures outside. The Master Automotive Technician / Mechanic must be able to meet the following physical requirements: Stand five hours per day and able to walk to gain access to various areas of the building Bend, stoop, kneel and crouch regularly up to 10 hours per day; must have full range of motion with arms and hands and be able to feel, handle or finger objects frequently Lift and/or move up to 10 pounds regularly, lift and/or move up to 50 pounds frequently. Hear and speak Vision sufficient to detect color, depth, and re-focus Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.#bayard

Req ID:443260Address: 612 Pederson Rd Katy, TX, 77494Benefits: * Fuel Your Growth with Love's - company funded tuition assistance program* Paid Time Off * Flexible Scheduling * 401(k) – 100% match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Hiring Immediately Welcome to Love’s!Diesel Technicians work in a fast-paced environment and maintain clean places with friendly faces. You will interact with customers & drivers from all over, making their travels and their day better. Job Functions: Troubleshoot and repair light mechanical issues that may include wheel-end assemblies, electrical systems, suspensions, A/C, or engine componentsAssist customers with roadside servicesProvide preventative maintenance servicesAbility to move, lift 75+ pounds working in close quarters. Ability to work in various temperatures.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Work a rotating schedule that alternates between day and night as needed.Ability to obtain a medical card through the Department of Transportation. (paid by Love’s) Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer. Veterans encouraged to apply.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

Build an Aviation Career You're Proud OfAt StandardAero, we use our ingenuity and know-how to find solutions for the simple to the most complex challenges in aviation. Together, we get the job done and done well. Our stability, resources, and respectful culture supports you in building a solid career with a great team you can count on day in and day out for the long term.As an A&P Inspector you will ensure the airworthiness of customer aircraft and ensures that regulatory and company requirements are met. Maintain proper communication and coordination between Production and Inspection personnel to deliver the customer's product on time, in accordance with FAA regulations and company policies/procedures.Essential Duties: Inspects all types of aircraft (including engines, electrical instruments, structures, controls, environmental control systems, landing gear, accessories, etc.) before, during, and after maintenance to ensure compliance with FAA regulations, production approval holder and military specifications, service bulletins, and airworthiness directives.Determines the serviceability of aircraft systems, parts, and components using precision measuring guides, gauges, instruments, measuring devices, magnification, and non-destructive testing (if appropriately certified).Accomplishes preliminary, hidden damage, in-process, and final inspection of all articles repaired, maintained, inspected, or altered by the facility.Complies with all applicable Federal Aviation Regulations (FARs), Quality Procedures (QPs), and Local Work Instructions.Provides procedural guidance to technicians and delegated inspectors. Trains and assists technicians in proper work procedures and practices.Monitors work in progress to ensure proper paperwork, procedures, techniques, and methods as prescribed by maintenance manuals, overhaul manuals, approved engineering documents, and other FAA approved data are used. Documents inspection results in inspection paperwork and log books. Accomplishes final review of work order documentation prior to final release of articles. Ensures that work performed is accurately reflected on the work order.Researches logbooks, and prepares logbook entries and sign-offs for approval for Return to Service (RTS). RTS any article that is maintained or altered by the facility, and if applicable, certify (in the appropriate records) that the article is airworthy with respect to the work performed. Approves aircraft for return to service upon completion of maintenance and/or alteration. Reports conditions adversely affecting the airworthiness of an article under repair or alteration to the Quality Leader.Must be up-to-date on scope of required maintenance and inspection for customers and coordinates efforts to ensure a timely turnaround.Supports and adheres to all safety, environmental, and general housekeeping policies.Basic Qualifications:Must be authorized to work in the U.S.High School Diploma or GED equivalent required.A valid FAA Airframe and Powerplant (A&P) License.Minimum of 5 years verifiable experience as A&P Mechanic.Preferred Qualifications:Previous Honeywell TFE731 / CFE738 experience.NDT certification / knowledge. Fluent/Bilingual in Spanish.Benefits that make life better:Comprehensive Healthcare401(k) with 100% company match; up to 5% vestedPaid Time Off starting on day oneBonus opportunitiesHealth- & Dependent Care Flexible Spending AccountsShort- & Long-Term DisabilityLife & AD&D InsuranceLearning & Training opportunitiesRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture.About UsRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero

Are you an experienced Systems Engineer looking for a new challenge and an opportunity to further advance your skills and career in a great working environment Join our fast-growing team supporting leading Aerospace companies! If you are a highly motivated individual, a self-starter with an entrepreneurial spirit and a genuine interest in technology, we have the perfect job for you!The RoleThe Senior Systems Engineer will be the engineering leader to support gas turbine programs including new product introduction, cost out, reliability improvements, engine delivery, test engineering, and root cause investigations of field issues. You will be responsible for establishing requirements, developing engineering plans to substantiate design changes to meet these requirements, and then leading the engineering teams through execution. This includes the engine level engineering integration and customer communications. You will also be the face of Quest to your customers. Through listening to customer challenges, and building on your previous experiences, you will find creative approaches that will solve their most difficult engineering problems.Roles & Responsibilities: Grasp the breadth of customer product offerings and provide guidance to the design, manufacturing, instrumentation, test, and business teams Execute a robust process of design, creation, and optimization of systems, consisting of identification and quantification of system requirements, creation of alternate system design concepts, performance of design trade studies, selection and implementation of the best designs and verification that the design is properly integrated and executedOverall lead on external Customer CommunicationLeads technical execution through development, production, and field support applying established processes. Drives design decisions, identifying technical risks and abatementsLead and influence teams without direct reportingInfluences product line major decisions and long-term strategies negotiating and considering business/customer needs and technical/budget constraintsDrives prioritization of technical needs for a given engine model, cross functional coordinationHas deep knowledge of the engine model characteristics, design, configuration, and historyManages interface between components and execution organizations as well as overall configurationProgram Management - Tracks/allocates/manages budgets and deliverable statusUses judgment to make decisions or solve complex tasks or problems in areas of operational/product management, manufacturing, technology or engineering Required Skills (Technical Competency):We're excited to talk to you if your qualifications meet the following criteria: Bachelor's degree in Engineering4-8+ years of experience in an engineering position3+ years in Gas Turbine or Gas Turbine Package Design, Test engineering, and AnalysisSystems/Module level design, integration, thinkingDevelopment and Test ExperienceCross functional project leadership, influence, communication skillsTeam Leadership and Program ManagementRoot Cause Problem SolvingClear thinker and effective problem solverLifecycle product managementStrategic program decision responsibilityMentoring/coaching experienceUS Citizen or Permanent Resident required Physical Requirements & Work Environment: Mostly Office Environments, Occasional Shop Floor involvement.Independence / work without direct supervisionSubstantial amounts of telephone, video conferencing and computer work.Heavily Regulated Industries with strict adherence to procedures.Flexibility to meet business deadlines by staying late or arriving early.Typical 8 hour days plus lunch / 40 hour weeks / core (required) hours are 9AM to 4PMAbility to use personal transportation to visit customer locations.Due to the nature of the work, all candidates must be a U.S. Citizen or Permanent Resident. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

AutoReqId: 18066BR Pay Class: Hourly Hourly Pay Rate: 21.00 - 25.00 DOE Department: Maintenance Line of Business: Aggregates Position Type: Full-Time Job Posting: Heidelberg Materials is seeking a Plant Maintenance Mechanic for our South Texas Stabilized Sand business located in Houston, TX. Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America, previously known as Lehigh Hanson, operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. What You'll Get To Do Repair and maintain, in accordance with diagrams, sketches, operation manuals, and manufacturer's specifications, machinery and mechanical equipment, such as engines, motors, pneumatic tools, conveyor systems, and production machines and equipment, using hand tools, power tools, and precision measuring and testing instrumentsObserve mechanical devices in operation and listen to their sounds to locate causes of troubleLubricate machinery, change parts, or perform other routine machinery maintenanceReassemble machines after the completion of repair or maintenance workStart machines and observe mechanical operation to determine efficiency and to detect problemsInspect or test damaged machine parts, and mark defective areas or advise supervisors of repair needsLubricate or apply adhesives or other materials to machines, machine parts, or other equipment, according to specified proceduresInstall, replace, or change machine parts and attachments, according to production specifications What We Are Looking For Minimum 1 year of welding and fabrication experience required. Weld and torch, certification a plusMinimum of 6 months of hands-on maintenance experience (or formal technical training), troubleshooting and repairKnowledge of hydraulics and pneumaticsAvailable to work flexible hours, days as well as an average of 50 hrs. per week as neededKnowledge of mechanical moving parts (chains, bearings and rollers)Ability to use a variety of hand tools, power tools, shop machines, hoists, etc.Ability to read and fabricate from drawingsHigh School Diploma or equivalent preferredPhysical Requirements: sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below shoulder, work extended periods of time in same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 75 lbs., work in confined spaces, capable of wearing respiratory and other personal protective equipmentMSHA Part 46 Training a plus No search firms please Heidelberg Materials is a Drug Free Workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Job DescriptionUnleash your potential with the Johnson Controls team!As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!What you will doWe are looking for a skilled Journeymen Chiller Mechanic who has worked in commercial, industrial, and/or institutional markets to join our team. Candidates should have a minimum of five years’ chiller experience, with knowledge of maintenance procedures, troubleshooting, and rebuilds of medium-large tonnage chillers of all brands.How you will do itYou will be assigned primary service accounts and responsibility for executing contract maintenance visits, inspections, site assessments, service requests and recommending necessary upgrades or repairs in order to prolong the equipment life cycle of our customers equipment.You will establish & maintain a positive relationship with customers, vendors and co-workers through effective oral and written communication skills via phone, computer, and face to face.You will be expected to provide quote estimates for labor & material repairs and upgrades as needed.You will represent the company by serving as the direct customer contact and be responsible for servicing products and equipment on assigned projects, ensuring customer satisfaction by identifying, analyzing, diagnosing and repairing equipment and systems at customer’s location.You will be required to use cutting-edge software and technology, along with a variety of hand-tools, rigging equipment, following blueprints or engineering specifications, to diagnose and repair equipment.You will be expected to continually enforce safety to the highest standards and maintain security and accountability of company issued and procured assets by recording use, wear and conditions.You will be expected to work as part of a team who is dedicated to delivering the highest standard of service to all its customers which may require the flexibility to work overtime and weekends as the business requires, including occasional overnight stays.You will be added to our on-call rotations, since we are a 24/7 service company.What we look forRequiredThree years of commercial, industrial, and/or institutional experience with all types of chillers, various compressor technologies, chiller control systems, and speed drives.Requires Mechanical Journeyman status.Member of Local Union 211 or willing to join.Operating knowledge of Microsoft Office software and working proficiency with handheld computers (i.e. smartphones, iPads).Adherence to company safety program.Valid driver's license.Appropriate licenses to work with refrigerant, boiler, and steam operational & service knowledge.EPA Universal Refrigerant Certification.Good verbal and written communication skills.Must be able to be on call nights and weekends on a schedule-rotating basis.PreferredMore than 5 years of commercial, industrial, and/or institutional experience with all types of chillers, various compressor technologies, chiller control systems, and speed drives.**This is a Bargaining Unit Position.#TechHiringJohnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Overview: ** HIRING NOW ** Pay: $14.00 - $18.00 per hour ** Valid/Current Texas Emissions State Inspector Licens e HIGHLY PREFERRED **Sun Auto Tire & Service operates multiple locations across Texas and is expanding! We offer complete quality automotive repair and preventative maintenance. Our ASE certified technicians will be happy to help you on a wide range of services including alignments, brake repair, oil changes, batteries, shocks and struts, belts and hoses, and air conditioning.The State Emissions Inspector / General Service Technician will perform non-technical service repairs such as oil changes, tire and wheel related services, alignments, flushes, and more. While working alongside ASE Certified Automotive Technicians, you will get the training necessary to get to the next level in your career. If you are interested in becoming a certified ASE Automotive Technician, this is the opportunity for you. This could be the beginning of your successful career.Benefits: No Sundays or late nights Competitive Bi-Weekly Pay Tuition Reimbursement Paid Vacation and Sick Time 6 Paid Holidays Medical, Dental and Vision Insurance (Effective 1st of the Month after Hire) Life Insurance (Company paid) 401(k) Retirement Savings Plan with Company Match Discounted Services on Personal and Immediate Family Vehicles Opportunity for Advancement!!! Principal Duties and Responsibilities: Safely transports customers to and from their place of residence or business using the company vehicle. Picks up parts, supplies, tires, etc. from vendors and/or the corporate office using the company vehicle. Operates company vehicle in a safe and courteous manner obeying all traffic laws. Conducts State Safety and Emission Inspections on vehicles in an ethical manner following all company and state guidelines. Performs tire mounting/dismounting, wheel balance and tire rotation. Performs oil changes and other basic services at the direction of the Shop Foreman or Store Manager. While performing basic services, observes general vehicle condition and points out any obvious needed repairs or safety concerns to the Shop Foreman or Store Manager. Utilizes the company's Multi-point Inspection and/or Repair Order to properly document the vehicle condition. Maintains cleanliness of the shop to include the service area, tire racks, showroom and outside the building to maintain a clean and inviting appearance. Follows all safety procedures and reports any concerns to the Shop Foreman or Store Manager. Qualifications: Possess valid driver's license Possess valid Texas Emissions Inspector license (highly preferred) Ability to work a minimum of five days, including Saturday's Working Conditions and Physical Demands: The General Service Technician will be exposed to moderate to loud noises, dust, exhaust fumes, lubricants, petroleum products, vapors, caustic materials, and other hazardous and non-hazardous materials. The temperature in the work environment varies and could include extreme heat and/or extreme cold depending on the ambient temperatures outside. The General Service Technician must be able to meet the following physical requirements: Stand up to eight hours per day in the shop and able to walk to gain access to various areas of the building Bend, stoop, kneel and crouch regularly throughout the day; must have full range of motion with arms and hands and be able to feel, handle or finger objects frequently Lift and/or move up to 10 pounds regularly, lift and/or move up to 50 pounds frequently. Hear and speak Vision sufficient to detect color, depth, and re-focus Previous automotive experience preferred, but we will consider energetic and hard-working individuals with a passion for cars. Candidates must have a high level of motivation and be able to work in a fast-paced environment -- there is ALWAYS something to do. Must possess a valid driver's license and be able to pass a pre-employment drug test, MVR, and criminal background check.Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. #bayard

Responsibilities: Follows, without exception, all work instructions and safety policies, including use of all PPE and safety equipmentPerforms routine preventive maintenance checks on all production equipment and machineryRepairs basic mechanical components and replace parts on machines such as bearings, filters, wiring, valves, gauges and switchesObserves and listens to mechanical devices in operation to locate causes of problemDismantles devices to gain access to and remove defective partsLubricates and cleans machinery and support equipment to maintain housekeeping and preventive maintenance standards within the plantAccomplishes all work orders to maintain safety; reduce downtime; decrease scrap; improve quality production; and improve plant efficiencyFollows all safety rules and procedures including Lockout/Tagout program, housekeeping and observes the operations to insure a safe work environmentPerforms other related duties as assigned Requirements: High School Diploma or GED3-5 years’ experience in a maintenance-related position within a manufacturing environment; or equivalent combination of training and experienceAbility to interpret documents such as procedure manuals, blueprints, schematics, charts, diagrams, etc.Ability to use precision measuring devices including amp meters, electric meters, and hydraulic gaugesBasic understanding of systems, equipment and schematicsAbility to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Good troubleshooting skillsBasic mathematical skills used to add, subtract, multiply, divide, and use decimals and fractionsAbility to perform work in a mature and professional manner, demonstrate personal responsibility, and perform all assigned dutiesDo you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Who We Are Invitation Homes is a team of more than 1,400 associates who come from all walks of life. We call different communities “home," but our shared values bind us together. Invitation Homes is a place where possibility lives.The market teams include our Leasing, Property Management and Rehab, Turns & Maintenance professionals. Together, our dedicated associates work hard to build excellent resident experiences while maintaining high-quality homes and ensuring potential residents are presented with a rental property they can’t refuse.Your Role on the Team As a Maintenance Technician at Invitation Homes, you will be performing high-quality maintenance work in our single-family rental homes while providing outstanding customer service to our residents. This includes but is not limited to the following tasks:Completing maintenance service requests across multiple tradesProviding excellent customer service and promoting a quality living experience for all residentsCompleting regular ProCare visits in residents’ homes to perform proactive maintenance and repairsEducating residents regarding all maintenance topicsCompleting general property condition assessments at all property visits and alerting the property management team when items require immediate attentionReviewing and using Technician-specific reports to find opportunities for improvementPerforming repairs in vacant properties while they are on-the-market or during the turn processProperly using and caring for company-supplied tools, materials, and vehiclesPerforming other duties as assignedYour Experience Includes High School diploma or equivalentOSHA 10 is required (new hires will have up to 90 days to complete OSHA 10 certification if not already certified).Proven experience in residential repairs and maintenance, other building maintenance or related experience.Understanding of residential construction and mechanical systems and ability to perform general repairs in some of the following: plumbing, electrical, carpentry, sheetrock, exterior structural, HVAC (minor) and appliances. Some training will be provided.Excellent customer service and interpersonal skills as well as strong verbal and written communication skills; multi-lingual a plusComfortability using mobile devices (i.e. iPad and/or iPhone) and various mobile applicationsMust possess a current driver's license, automobile insurance, and any other licenses and/or certification as required by state lawThe following certifications are preferred but not required:EPA Certification, Type I and IIHVAC CertificationCPO certification (pool)Ability to be at work on a regular and consistent basis including weekends and holidays as neededAbility to provide basic hand and power toolsAbility to perform work that requires the following:Frequent climbing, reaching, use of fingers, stooping, kneeling, crawling, pushing, pulling, lifting, talking, and hearingAbility to lift and/or move an excess of 50 pounds or more and operate standard maintenance equipment as assignedWhy Us We stand for flexibility, opportunity, and a home that people can make their own. It’s as true for our associates as it is for our residents. Just like we help our residents live freer, we liberate our associates’ careers, too. Our associates know that goals matter, potential is unlocked, and careers thrive. Invitation Homes isn’t just a workplace but a possibility place. We offer each new associate:Competitive pay and an annual bonus program for all associatesGenerous paid time off plans including vacation accrual, sick time, volunteer time, and standard and floating holidays401k with matching company contributionsAwesome work environment with casual dressTeam events and gatheringsEmployee resource groups: Together with Women, Asian Alliance, Black Collective, Juntos, Gen Next, and Open Invitation.Build a foundation here and apply today!Salary Range$19.11 - $33.13Compensation and BenefitsTo attract and retain top talent, we're pleased to offer competitive compensation and benefits, including:Annual bonus programHealth, dental, vision, and life insuranceLong-term and short-term disability insuranceGenerous paid time off plans include vacation accrual, sick time, standard holidays and floating holidays401(k) with company matching contributionsAwesome work environment with casual dressTeam events and gatherings (Pre- and Post-Covid)Invitation Homes is an equal opportunity employer committed to fostering a diverse, inclusive and innovative environment with the best associates. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, Veteran status or any other factor protected by applicable federal, state or local law. If you have a disability or special need that requires accommodation, please contact us at .To all recruitment agencies: Invitation Homes does not accept agency resumes. Please do not forward resumes to Invitation Homes employees. Invitation Homes is not responsible for any fees related to unsolicited resumes.

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: The Manual Machinist will set up and operate a variety of machine tools to produce precision parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures. This will be a 2nd shift opportunity, Overtime may be required. Responsibilities: Operating Manual Machines, Manual Lathe, VTLOperating Machine or Equipment – Operate basic equipment and machines and carry out routine tasks.Operations Management – Carry out operational tasks by following established processes.Equipment Maintenance and Repair - Help to maintain and repair equipment by carrying out preparations and providing assistance.Health, Safety and Environment – Follow basic mandatory work instructions to safeguard the environment and the wellbeing of oneself and others.Operational Compliance – Follow a straightforward mandatory procedure to ensure that work is carried out to the required quality standards and/or to ensure adherence to external regulatory codes and internal codes of conduct.Precision Equipment Utilization – Interpret and use precision measuring equipment/instruments such as micrometers, dial indicators, and depth gauges.Instructions and Drawings – Ability to read and interpret blueprints and geometric tolerances.Internal Communications – Exchange information with people by having courteous interactions with them.Policy and procedures - Works with guidance to understand policies and procedures, while making sure they match organizational strategies and objectives.Other duties as assigned. Requirements: Equipment Experience – 2+ years machining experience in a manufacturing or repair environment operating manual lathes, milling machines.HS Diploma / GED and 3-5 years relevant experience Preferred Experience / Skills: Verbal Communication – Uses clear and effective verbal communication skills to express ideas and request actions.Planning and Organizing – Works with guidance to plan, organize, and prioritize activities to efficiently meet business objectives.Health and Safety - Applies elementary concepts to manage and apply safe systems of work Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits Req ID : R-10388 Job Family Group : Operations Job Family : OP Machining EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

*** $10K sign on bonus for qualified candidates with 3 or more years of experience***Job Title: A&P MechanicLocation: Houston, TXSchedule: Second Shift with possible Overtime (Tuesday-Friday, working 4-10 hr days)Build an Aviation Career You're Proud OfAt StandardAero, we use our ingenuity and know-how to find solutions for the simple to the most complex challenges in aviation. Together, we get the job done and done well. Our stability, resources, and respectful culture supports you in building a solid career with a great team you can count on day in and day out for the long term.The A&P Mechanic is responsible for performing routine maintenance and major inspections on corporate aircraft. Troubleshooting, repair, and modification of aircraft components is accomplished by this position. In addition, engine removal and reinstallation, operational checks, leak checks, and engine runs are all within the responsibility of the A&P Mechanic. Experience with Embraer, Falcon, Lear, Challenger, and Hawker required.Responsibilities:Removes and reinstalls engines from turbofan and turboprop powered aircraft.Responsible for using sound judgment and technical aptitude to make decisions regarding maintenance, sequence, and techniques, troubleshooting and discrepancy resolution.Performs operational checks and engine runs to ensure air-worthiness prior to departure.Inspects aircraft in accordance with OEM Light or Heavy Maintenance ManualsEvaluates removed components for serviceability and documents discrepancies (squawks). Reinstalls and tests components after completed inspection.Troubleshoots and repairs all airframe systems as required (hydraulics, landing gear, etc.).May perform fuel tank sealing on aircraft.Documents all work accomplished (aka sign-off) in a clear, concise and accurate manner.Accomplishes Service Bulletins, Repair Letters, and Airworthiness Directives as required.Reads and interprets maintenance manual procedures, blueprints, technical manuals, and schematic diagrams when required.Responsible for knowing, understanding, following, promoting, and continuously improving company policies and procedures.Analyzes a variety of mechanical problems and determines the cause and best method of repair.Tests operation and repairs/adjusts, as required: engines, engine controls and accessories, propellers and controls, landing gear, hydraulic systems and servicing, and flight controls, and adjusts rigging as required.Checks and repairs fuel, oil, oxygen, heating, cooling and pressurization systems.Utilizes mechanics hand tools, precision measuring instruments, gauges and calibration test equipment.Observes all safety, environmental and general housekeeping rules and policies.May perform other duties as required by the department.Requirements:High School Diploma or GEDA valid FAA Airframe and Powerplant (A&P) License is required.Minimum 2 years corporate aviation experience on Learjet, Hawker, Falcon Jet, Challenger, and EmbraerEligibility Requirements:Must be authorized to work in the U.S.Must have proven mechanical and technical aptitude.Must have proven experience using a variety of hand and/or power tools.Must be able to work with minimal supervision.Strong communication skills required, both verbal and written.Must be available to work second shift, with overtime and weekends as needed.Must be able to work outside in extremes of temperature and inclement weather.Must have the ability to think clearly, speak intelligibly on the telephone and in person.Must have the ability to manipulate equipment of all sizes, tools, computer keyboards, and telephones.Must be able to work in confined spaces.Must be able to stand on hard surfaces for long periods of time.Must be able to see to disassemble and visually inspect.Must be able to hear to detect the sources of problems.Must have excellent hand-to-eye coordination.Must have a history of demonstrating high levels of initiative in completing all job assignments and clearly following directions.Must be able to stand for extended periods of time (8+ hours), lift 50 pounds unassisted, walk, bend, stretch, and climb ladders to service aircraft. Preferred CharacteristicsAviation training preferred. This training may take the form of military training, aeronautical academy or technical school training and/or an Aviation Associates Degree.Factory authorized training on assigned aircraft or engines is preferred.StandardAero Offers:Competitive wagesGenerous paid time offInsurance includes medical, dental and vision benefits401K (immediately vested company match up to 5%)Safety focused cultureQuarterly Bonus structureAdvancement opportunitiesRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero

AutoReqId: 20168BR Pay Class: Hourly Hourly Pay Rate: $25.00 - $27.00 DOE Department: Maintenance Line of Business: RMC (Ready-Mix Concrete) Position Type: Full-Time Job Posting: Heidelberg Materials is seeking a Maintenance Mechanic for our South Texas Concrete facility located in Houston, TX. Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. What You'll Get To Do Inspect equipment for proper functional use and perform preventative maintenance duties per manufacture’s specifications.Upgrade areas with new equipment/technology.Maintain current written or data input spreadsheets on all equipment repairs.Inspect, diagnose, and perform repair and maintenance of all plant equipment, using a variety of hand tools, power tools, shop machines, hoists, etc.Install and replace bearings, speed reducers, shafts, pulleys, idlers, motors, couplings, etc.Make major repairs to crushers, changing jaw dies, bearings, bushings, crusher mantles, etc.Repair conveyor belts, feeders, and hydraulic systems.Proficiently work with outside contractors on special projects.Have a willingness to operate individually or within the constraints of a team environment. What We Are Looking For Minimum of 5 years of experience (or formal technical training) mechanical troubleshooting and repair2+ years of diversified welding experienceMust have knowledge of hydraulics and pneumaticsMust have knowledge of mechanical moving parts (chains, bearings and rollers)Must be proficient at both ARC and MIG weldingMust be able to read and fabricate from drawingsMust be flexible to work occasional evenings or weekends to meet production requirements as needed. No search firms please Heidelberg Materials is a Drug Free Workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!What you will doWe are looking for a skilled Journeymen Chiller Mechanic who has worked in commercial, industrial, and/or institutional markets to join our team. Candidates should have a minimum of five years’ chiller experience, with knowledge of maintenance procedures, troubleshooting, and rebuilds of medium-large tonnage chillers of all brands.How you will do itYou will be assigned primary service accounts and responsibility for executing contract maintenance visits, inspections, site assessments, service requests and recommending necessary upgrades or repairs in order to prolong the equipment life cycle of our customers equipment.You will establish & maintain a positive relationship with customers, vendors and co-workers through effective oral and written communication skills via phone, computer, and face to face.You will be expected to provide quote estimates for labor & material repairs and upgrades as needed.You will represent the company by serving as the direct customer contact and be responsible for servicing products and equipment on assigned projects, ensuring customer satisfaction by identifying, analyzing, diagnosing and repairing equipment and systems at customer’s location.You will be required to use cutting-edge software and technology, along with a variety of hand-tools, rigging equipment, following blueprints or engineering specifications, to diagnose and repair equipment.You will be expected to continually enforce safety to the highest standards and maintain security and accountability of company issued and procured assets by recording use, wear and conditions.You will be expected to work as part of a team who is dedicated to delivering the highest standard of service to all its customers which may require the flexibility to work overtime and weekends as the business requires, including occasional overnight stays.You will be added to our on-call rotations, since we are a 24/7 service company.What we look forRequiredThree years of commercial, industrial, and/or institutional experience with all types of chillers, various compressor technologies, chiller control systems, and speed drives.Requires Mechanical Journeyman status.Member of Local Union 211 or willing to join.Operating knowledge of Microsoft Office software and working proficiency with handheld computers (i.e. smartphones, iPads).Adherence to company safety program.Valid driver's license.Appropriate licenses to work with refrigerant, boiler, and steam operational & service knowledge.EPA Universal Refrigerant Certification.Good verbal and written communication skills.Must be able to be on call nights and weekends on a schedule-rotating basis.PreferredMore than 5 years of commercial, industrial, and/or institutional experience with all types of chillers, various compressor technologies, chiller control systems, and speed drives.**This is a Bargaining Unit Position.#TechHiringJohnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Do you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

*** $10k SIGN ON BONUS ELIGIBLE ***Build an Aviation Career You're Proud OfBuild your career with integrity by working at a company that doesn't just treat you like a number. You'll get the tools to do things right in a clean and safe work environment and the trust to fix any issue that comes your way. Our on-the-job training and team of experts mean you'll be set up for success. Take charge of our day-to-day operations, so we remain the trusted source for aviation repair and maintenance. Work with your team to implement the right processes and practices across our organization to help ensure flight and product efficiency.The Embraer Mechanic is responsible for performing routine maintenance and major inspections on corporate aircraft (airframe and powerplant). Troubleshooting, repair, and modification of aircraft components is accomplished by this position. In addition, engine removal and reinstallation, operational checks, leak checks, and engine runs are all within the responsibility of the A&P Mechanic.What to expect in this role:Removes and reinstalls engines from turbofan and turboprop powered aircraft.Responsible for using sound judgment and technical aptitude to make decisions regarding maintenance, sequence, and techniques, troubleshooting and discrepancy resolution.Performs operational checks and engine runs to ensure air-worthiness prior to departure.Inspects aircraft in accordance with OEM Light or Heavy Maintenance ManualsEvaluates removed components for serviceability and documents discrepancies (squawks). Reinstalls and tests components after completed inspection.Troubleshoots and repairs all airframe systems as required (hydraulics, landing gear, etc.).May perform fuel tank sealing on aircraft.Documents all work accomplished (aka sign-off) in a clear, concise and accurate manner.Accomplishes Service Bulletins, Repair Letters, and Airworthiness Directives as required.Responsible for knowing, understanding, following, promoting, and continuously improving company policies and procedures.Analyzes a variety of mechanical problems and determines the cause and best method of repair.Tests operation and repairs/adjusts, as required: engines, engine controls and accessories, propellers and controls, landing gear, hydraulic systems and servicing, and flight controls, and adjusts rigging as required.Checks and repairs fuel, oil, oxygen, heating, cooling and pressurization systems.Utilizes mechanics hand tools, precision measuring instruments, gauges and calibration test equipment.Basic Qualifications:Experience in corporate aviation on Embraer Legacy, Prader or Phenom.A valid FAA Airframe and Powerplant (A&P) License is required.Ability to read and interpret maintenance manual procedures, blueprints, technical manuals, and schematic diagrams.Must be authorized to work in the U.S.High School Diploma or GEDMust be able to stand for extended periods of time, lift 50 pounds unassisted, walk, bend, stretch, and climb ladders to service aircraft. Preferred CharacteristicsMinimum 3 years of experience and formal training on Embraer Legacy, Prader or Phenom.Factory authorized training on assigned aircraft or engines is preferred.About UsRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardStandardAero offers equal employment opportunities for all. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture.About UsRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero

What you will doDo you have HVAC experience We are looking for HVAC systems mechanics who have worked in light commercial and/or heavy commercial markets to join our team to work with the most advanced heavy commercial and industrial cutting-edge equipment.We provide factory certification through our Service Technical Academy (STA) with milestone recognition and monetary rewards and advancement, increased incentive opportunity for executed pull-through work, top of the line technology, equipment, and uniforms and a #1 focus on employee safety. We will equip you with tools and a vehicle to perform your job at the highest standard.Journeyman must be skilled craftsmen in their trade, and we prefer a minimum of five (5) years actual, practical working experience in the HVAC plumbing, pipefitting and/or mechanical equipment service industry. You may be required to pass a satisfactory examination as to your special skill.Provide our customers with the highest level of service to solve building inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of service.How will you do it Mechanics must have practical working experience in light commercial or commercial mechanical equipment. May be required to satisfactorily pass an examination to identify special skills. Scope of work shall be limited to commercial HVACR service. Servicemen may partner with Journeymen in the repair of centrifugal, steam turbines, and absorption machines, open-drive screw chillers and ammonia systems. Perform maintenance, repair and replacement services on commercial heating and cooling systems. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions.What we look forRequired· Two (2) years Commercial and/or industrial, mechanical troubleshooting experience in the HVAC industry.· Ability to commit to a 30-Hour OSHA Certification which is to be done after hours and weekends is required upon hire.· Computer savvy with good verbal and written communication skills.Preferred· Five (5) years of Commercial and or industrial work experience in the HVAC industry· Refrigeration Certification preferred.· EPA Universal Refrigerant Certification#TechHiringJohnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: The Painter will prep product for painting, operate paint equipment, and paint product and/or components per operating procedures and instructions. This position regularly requires work near moving mechanical parts. It occasionally requires exposure to fumes or airborne particles and vibration. Responsibilities & Requirements: Responsible for quality of work performed; work efficiently and to required specifications with minimal supervision.Understand and operate equipment properly and safely.Work in a high noise level environment.Quick response and handling of abnormal production task.Be able to mix paint and complete painting tasks according to the operation procedure.Perform all part finishing activities including sandblast, parts finishing, powder paint, and wet spray.Understanding of the paint preparation including masking, anodize, and phosphate process.Paint parts using electrostatic powder or liquid painting.Able to use, operate and maintain specialized equipment including wet spray guns, airless systems, booths, powder coat systems, ovens, chemical tanks, and processes operate and sandblast maintenance, etc.Must wear safety protection according to company policy.Adhere to safe work habits, rules, and practices, including the correct use of tools, machines, safety devices and equipment.Maintain a clean and orderly workplaceExhibit behaviors that contribute toward an environment that encourages teambuilding, decision making, problem-solving and continuous improvement.Read and understand both verbal and written instructions.Participate in CIP activities as required and comply with all Flowserve policies and procedures.Understand and apply SPP and QA requirementsCommunicate effectively, presenting in one-on-one and in small group situations to customers, clients, and other employees of the organization.Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.Need to have related painting experience or training.Able to stand for prolonged periods of time.Position requires occasional walking; also requires stretching, twisting, manual dexterity, and the ability to lift, push, or pull up to 50 pounds.Vision requirements for this position are close vision, depth perception and the ability to adjust focus.Able to work overtime as needed. Preferred Experience / Skills: Painting certification.Previous experience working in a manufacturing environment.HS Diploma / GED and 3-5 years relevant experience Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits. Req ID : R-11719 Job Family Group : Operations Job Family : OP Painting EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

Responsibilities: Follows, without exception, all work instructions and safety policies, including use of all PPE and safety equipmentPerforms routine preventive maintenance checks on all production equipment and machineryRepairs basic mechanical components and replace parts on machines such as bearings, filters, wiring, valves, gauges and switchesObserves and listens to mechanical devices in operation to locate causes of problemDismantles devices to gain access to and remove defective partsLubricates and cleans machinery and support equipment to maintain housekeeping and preventive maintenance standards within the plantAccomplishes all work orders to maintain safety; reduce downtime; decrease scrap; improve quality production; and improve plant efficiencyFollows all safety rules and procedures including Lockout/Tagout program, housekeeping and observes the operations to insure a safe work environmentTroubleshoot equipment failures to determine root cause and initiate appropriate remedial action.Repair of equipment to improve availability and reliability for production.Collect and analyze work delay codes to identify challenges to timely completion of scheduled jobs and work with available resources to reduce delays.Ensure preventative maintenance compliance and that repair history is properly documented.Assist in sourcing and requisitioning maintenance supplies, equipment, and services within budgeted guidelines.Performs other related duties as assigned Requirements: Three to five years of work experience in a manufacturing plant as a Maintenance Mechanic or TechnicianKnowledge and experience working with high-speed equipment and electric-pneumatic controls.Able to use both a MIG welder, and ARC welder.Able to order parts and maintain inventory of all maintenance-related material.Advanced working knowledge on mechanical/electrical systems and components; including, but not limited to, Pneumatic, Hydraulic, Pumps, Gear Boxes, Power Transmission, Material Handling, Sensor, Transmitters, DC and AC circuits, Transformers, Power and Energy, Arc FlashWorking knowledge and experience on Automation; Industrial Process and Control system; PLC; Measuring Devices; Instrumentation; Robotic Application; Bulk Handling SystemWorking knowledge and experience on Facility Maintenance (Roof, Dock, plumbing) and Plant Equipment (Boiler, Air Compressors, Ammonia/Freon/Glycol Refrigeration, HVAC, Ventilation, Cooling Tower, Condenser, Backflow preventer, Sprinkler and Fire Extinguisher, Wastewater System, )Planning, scheduling & assigning ability while well experienced in defining priorities, required skills & resources.Hold practical knowledge of Microsoft Office.Multitasked in a fast-paced environment with lots of changes in direction bases business requirement.Excellent problem-solving and analytical skills; ability to work collaboratively and effectively with other departments.Do you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

** $10k Sign On Bonus Eligible **Build an Aviation Career You're Proud OfBuild your career with integrity by working at a company that doesn't just treat you like a number. You'll get the tools to do things right in a clean and safe work environment and the trust to fix any issue that comes your way. Our on-the-job training and team of experts mean you'll be set up for success.Take charge of our day-to-day operations, so we remain the trusted source for aviation repair and maintenance. Work with your team to implement the right processes and practices across our organization to help ensure flight and product efficiency.As a Learjet Mechanic at StandardAero Houston, you will be responsible for using your sound judgment and technical aptitude to make decisions regarding maintenance, sequence, and techniques, troubleshooting and discrepancy resolution. You will perform operational checks and engine runs to ensure air-worthiness prior to departure.What to expect in this role:Inspects aircraft in accordance with OEM Light or Heavy Maintenance ManualsEvaluates removed components for serviceability and documents discrepancies (squawks). Reinstalls and tests components after completed inspection.Troubleshoots and repairs all airframe systems as required (hydraulics, landing gear, etc.).May perform fuel tank sealing on aircraft.Documents all work accomplished (aka sign-off) in a clear, concise and accurate manner.Accomplishes Service Bulletins, Repair Letters, and Airworthiness Directives as required.Reads and interprets maintenance manual procedures, blueprints, technical manuals, and schematic diagrams when required.Responsible for knowing, understanding, following, promoting, and continuously improving company policies and procedures.Analyzes a variety of mechanical problems and determines the cause and best method of repair.Tests operation and repairs/adjusts, as required: engines, engine controls and accessories, propellers and controls, landing gear, hydraulic systems and servicing, and flight controls, and adjusts rigging as required.Checks and repairs fuel, oil, oxygen, heating, cooling and pressurization systems.Utilizes mechanics hand tools, precision measuring instruments, gauges and calibration test equipment.Basic Qualifications:Corporate aviation experience and training on Learjet.High School Diploma or GEDA valid FAA Airframe and Powerplant (A&P) License.Must be authorized to work in the U.S.Must be available to work overtime and weekends as needed.Must be able to stand for extended periods of time, lift 50 pounds unassisted, walk, bend, stretch, and climb ladders to service aircraft.Preferred Qualifications:Minimum 3 years corporate aviation experience on Learjet.Factory authorized training on Learjet.Benefits that make life better:Comprehensive Healthcare Insurance401(k) with a 5% company match, immediately vested. Paid Time Off starting on day one!Quarterly Bonus opportunitiesHealth & Dependent Care Flexible Spending AccountsShort & Long-Term Disability InsuranceLife & AD&D InsuranceCareer development and cross-training opportunitiesAbout UsRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture.About UsRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero