ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday

As a Marine Operations Field Engineer on the multibillion dollar Hampton Roads Bridge Tunnel expansion project, you will provide technical engineering information to ensure construction work complies with all engineering standards, codes and contract specifications.Flatiron, as part of the Hampton Roads Connector Partners (HRCP) Joint Venture has been selected to construct the new Hampton Roads Bridge Tunnel (HRBT) Expansion Project in Virginia.The multibillion dollar HRBT project scope will include: a new bridge-tunnel crossing, replacement of existing marine approach bridges, the addition of a third lane on 1-64 in each direction, and new bridge-tunnel complex that will accommodate 4 lanes of traffic for a total of 8 lanes of capacity across the water and is expected to conclude in 2025.Meets daily with project crews to review production schedule and confirm all materials, equipment and resources are readily available for production to continue on schedule and within budget. Collects, coordinates and analyzes shop drawings, design specifications, material requirements and project data through the duration of the project to ensure quality and contract specification compliance. Provides technical input for project work plan and scheduling. Identifying risk elements of production, materials, equipment or process that could negatively impact the budget or schedule. Evaluates daily production, schedule and budget projections to accurately track project performance. Documents daily activities in Company approved methods and technologies. Notifies team members and manager of any significant schedule changes and recommends solutions for management consideration. Perform additional assignments per management’s direction.Remits accurate project quantity input and controls using assigned project cost coding to ensure project financials are accurately reported. Manages cost coding with Company finance and accounting teams regarding employee time, materials, equipment and subcontractor needs.Reviews and approves daily timecards for all Company construction crews. Works with Office Manager, payroll and job construction supervisors to resolve timecard inquiries, as needed. Reviews project specifications for quality assurance at the beginning of work, during the project work and after work completes. Initiates and manages appropriate certificates, inspections and other documentation regarding construction production on the project site. Works with construction crews and engineering leaders to plan field layout on the project site, ensuring appropriate utility and commercial lines are marked before production begins. Initiates and manages any permits needed before work can begin. Conducts required Job Hazard Analysis (JHAs) to ensure a safe and compliance work environment for all construction personnel. Attends weekly safety meetings with field team and project leadership; presents field analysis as needed. Assists the estimating team with project schedules and provides technical input as needed. Assists the development of design drawings and provides technical input, as needed. Coordinates subcontractor work methods, schedule and crews as needed. Reconciles job close-out checklist with owner representative and field crews at the end of the project. Maintains knowledge of Company values and strategic plan.Bachelor's Degree in a related field required. 1+ years of construction engineering experience required. Beginner knowledge of construction equipment & techniques, drawing & specifications, building materials and required standards applicable to the project. Ability to assume responsibility, interface and communicate effectively with others.Ability to manage multiple tasks efficiently and effectively in a fast-paced environment. Skill in verbal and written communication needed. Proven self-starter and self-motivated to learn and grow knowledge. Knowledge of construction scheduling and production time management Construction engineering experience or knowledge required.Some of the benefits you may be eligible for as an employee are:Comprehensive compensation package and paid time off programIndustry leading 401(k)/RRSPMedical/Extended Health Care, Dental, Vison and/or Provincial MedicalWellness benefits & Employee Assistance ProgramTuition Reimbursement ProgramWe are an EEO/AA/ADA/Veterans employer.USD $75,000.00/Yr.USD $95,000.00/Yr.

Build your best future with the Johnson Controls TeamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away! What we offerCompetitive salary starting at $56k- $60k base, plus guaranteed commission and sign-on bonus with total compensation of $83k – $87k (may change based on location)Paid vacation/holidays/sick time – 15 days of vacation, 5 sick days, 3 floating holidaysComprehensive benefits package including but not limited to; 401k, Medical, Dental and Vision care – Available day oneEncouraging and collaborative team environmentCheck us Out: A Day in a Life at Johnson Controls | Sales Roles - YouTubeWhat you will doOur Early CareerSales Engineering (BEST) Program is a 4-month technical sales development program for Recent College Graduates that focuses on creating market share by strategic selling Johnson Controls’ HVAC products and services to commercial customers. In this program you will have a chance to apply your technical engineering knowledge and business acumen to work with customers to better understand their product and project needs by being the subject matter expert. As part of the program, you will participate in a 4-month training and development program combining classroom, field orientation, and on the job training. You will learn our mechanical equipment and service offerings, customer relationship techniques and leadership skills in preparation for supporting customers in your territory alongside the sales team. You will be prepared to consult with architects, engineers, and building owners on product selections; partner with and learn from internal experts and deliver on business goals. You will be a critical part of a local sales team and a national network of sales professionals. #BEST How you will do itEstimate job bids and prepare proposals with contractors, architects and building owners Coordinate with vendors and subcontractors Complete sales calls to generate new business and build on existing relationships Present solutions to customers for consideration Collect and analyze market intelligence Turn projects over to operations team for execution and installationsWhat we look forRequired:Currently pursuing an Engineering Bachelor’s degree and graduating in December 2024 and May/June 2025 Program starts January or June 2025, must be able to work full-time before program begins Strong analytical ability to solve programs and ability to learn quickly Ability to manage multiple projects and cross-functional teams with minimum guidance Strong communication and teamwork skills Preferred:Electrical or Mechanical Engineering Degree, strongly preferred Previous sales or engineering experiences through co-ops, internships, part-time or full-time jobs (preferred)Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Type of Requisition:RegularClearance Level Must Currently Possess:NoneClearance Level Must Be Able to Obtain:SecretSuitability:Public Trust/Other Required:NoneJob Family:Engineering (General)Job Qualifications:Skills:Analytical Thinking, AutoCAD 3D, Engineering DesignCertifications:Experience:1 + years of related experienceUS Citizenship Required:YesJob Description:Engineer AssociateEngineer AssociateSeize your opportunity to make a personal impact as an Engineer Associate. GDIT is your place to make meaningful contributions to challenging projects and grow a rewarding career.At GDIT, people are our differentiator. As an Engineer Associate you will help ensure today is safe and tomorrow is smarter. Our work depends on Engineer Associate joining our team.· You will perform complex technical functions in support of engineering activities including set up, operations, maintenance, modifications, circuit testing, calibration and troubleshooting of electronic or electro-mechanical components and systems, experimental design circuitry, prototype models and/or specialized test equipment.·Maintains current knowledge of relevant technology as assigned.· Analyzes customer requirements and provides solutions to a variety of technical problems of moderate complexity.·Work from schematics, diagrams, written, and verbal instructions.·Diagnose and isolate equipment and system malfunctions that fail to respond to standard corrective measures.·Assist in the development of electronic equipment.·You may provide guidance and work leadership to less-experienced technicians.·Use engineered drawings, statements of work, and technical manuals to determine requirements for cable systems.·Ensures techniques, materials, and accomplishments meeting technical standards and specifications and engineering directives.·Create and revise product drawings using AutoCAD, SolidWorks, and/or Fusion 360.WHAT YOULL NEED TO SUCCEED:·Education: Bachelor's Degree or equivalent experience.·Required Experience: 1+ years of related experience.·Security Clearance Level: Secret or able to obtain.·Location: Chesapeake Virginia·US Citizenship RequiredGDIT IS YOUR PLACE: 401K with company match. Comprehensive health and wellness packages. Internal mobility team dedicated to helping you own your career. Professional growth opportunities including paid education and certifications. Cutting-edge technology you can learn from. Rest and recharge with paid vacation and holidays.The likely salary range for this position is $63,648 - $86,112. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range.Scheduled Weekly Hours:40Travel Required:Less than 10%Telecommuting Options:OnsiteWork Location:USA VA ChesapeakeAdditional Work Locations:Total Rewards at GDIT:Our benefits package for all US-based employees includes a variety of medical plan options, some with Health Savings Accounts, dental plan options, a vision plan, and a 401(k) plan offering the ability to contribute both pre and post-tax dollars up to the IRS annual limits and receive a company match. To encourage work/life balance, GDIT offers employees full flex work weeks where possible and a variety of paid time off plans, including vacation, sick and personal time, holidays, paid parental, military, bereavement and jury duty leave. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available. We regularly review our Total Rewards package to ensure our offerings are competitive and reflect what our employees have told us they value most.We are GDIT. A global technology and professional services company that delivers consulting, technology and mission services to every major agency across the U.S. government, defense and intelligence community. Our 30,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 30 countries worldwide, offering leading capabilities in digital modernization, AI/ML, Cloud, Cyber and application development. Together with our clients, we strive to create a safer, smarter world by harnessing the power of deep expertise and advanced technology.We connect people with the most impactful client missions, creating an unparalleled work experience that allows them to see their impact every day. We create opportunities for our people to lead and learn simultaneously. From securing our nation’s most sensitive systems, to enabling digital transformation and cloud adoption, our people are the ones who make change real.GDIT is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other protected class.

Description More About the Role:Leidos currently has an opening on the ‘Service Management, Integration and Transport’ (SMIT) Contract for a Communications Network Engineer Senior - Transport Operations Boundary position. This is an exciting opportunity to use your experience and leadership skills to successfully execute the mission of the Navy’s largest IT services program: SMIT. Under the SMIT Contract, the Leidos team will deliver the core backbone of the Navy-Marine Corps Intranet, including cybersecurity services, network operations, network engineering, service desk, and data transport. Ultimately, Leidos will support the Navy in unifying its shore-based networks and data management to improve capability and service while also saving significant dollars by focusing efforts under one enterprise network. This position requires Engineering, Operations Support, Management and extensive knowledge of network communications, architecture, security controls, and compliance and configuration discipline.What You'll Get to Do:•Provide Network Boundary professional services and thought leadership for the largest Intranet in the world. A qualified candidate for this position would be responsible for network design, integration, test, security, and implementation of Network Services for the as-fielded NMCI network.•Design, implement, and manage load balancing solutions to optimize network performance and ensure high availability for government applications.•Configuration and maintenance of firewall systems to protect sensitive government data and ensure security compliance and resource availability.•Monitor network traffic and analyze performance metrics to identify and address current and potential issues.•Develop and enforce security policies and procedure related to network boundary traffic management.•Collaboration with other enterprise network teams and departments to streamline firewall and load balancing solutions within the existing network infrastructure.•Troubleshoot and resolve complex network issues related to network boundary appliances.•Provide network boundary expertise and technical guidance for junior network engineers and supporting staff.•Continuous Service Improvements (CSI).•Network appliance updates, performance tuning, and enhancements.•Create and maintain Engineering Implementation Plans (EIP).•Analyze network bandwidth needs and recommend actions to meet requirements.•Expert knowledge of defense-in-depth principles, Network and Security architecture, network topology, IT device integrity, and common network security elements.•Plans and executes network upgrades and maintenance activities with the NMCI Operations Manager, NOC Lead, Release Management team and other key enterprise stakeholders.•Tier III escalation support and vendor engagement supporting Incident Management activities.•Active participation in Root Cause Analysis for Problem Management activities.You'll Bring These Qualifications:•Requires B.S. Degree and 8–12 years of prior relevant experience or Masters with 6–10 years of prior relevant experience. May possess a Doctorate in technical domain (in STEM or relevant field, or comparable experience with an additional 10 years or a Master’s degree with 8 years of overall related experience). -Additional years of related experience may substitute for a degree at Hiring Manager's discretion.•8+ years’ experience engineering and troubleshooting networks, including extensive routing and switching experience such as MPLS, VPNs, routing protocols i.e. BGP, OSPF, IS-IS, switching protocols i.e. Spanning Tree Protocol, VLANs, LLDP, VoIP, Multicast protocols and emerging network technologies.•Currently possess an active Secret security clearance and ability to attain a Top-Secret clearance•Minimum of DoD 8570.01 IAT Level III Certification required prior to onboarding: i.e. CCNP Security, CISSP, or CASP+ (See DoD 8570.01-M Appendix 3 for valid certifications).•An Associate level Network Vendor Certification is required prior to onboarding (from one of the following Vendors): Cisco, Juniper, F5 Networks or Aruba Networks.•Effective written and oral communication; Expert problem-solving skills and strategies.•Willingness to be called during off-hours on a rotational basis to meet customer mission requirements.•Information Assurance Professional for boundary operations providing tier-III support to the enterprise.•Participate in engineering and project planning meetings to bridge the gap between operations and engineering providing operational readiness for new solutions projected to be deployed into production.•Perform highly technical maintenance involving firewalls, load balancers, and other network appliances.•Perform Government Directed Action (GDA) changes to existing network configurations.•Strong understanding and in-depth knowledge of IP network/subnet addressing.•Experienced and adept at developing and maintaining technical documents, analyses, and reports.•Experience presenting to senior customer management, customer stakeholders, and company management.•Familiarity with the ITIL framework.•Ability to travel up to 25% including OCONUS potential travel.These Qualifications Would be Nice to Have:•Previous work experience providing support to the NGEN-NMCI program is highly desired.•Experience with Aruba ClearPass Policy Manager (CPPM) identity management solution.•Advanced/Professional level vendor certifications (Cisco, Juniper, Aruba, Palo Alto).•Demonstrated NET/SEC DevOps experience.•IAT Level III Certification (i.e. CISSP or equivalent).•ITIL v3/v4 certification/training.•Agile certifications or applicable experience.Original Posting Date:2024-08-13While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $87,100.00 - $157,450.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

As a Roadway Field Engineer on the multibillion dollar Hampton Roads Bridge Tunnel expansion project,you will provide technical engineering information to ensure construction work complies with all engineering standards, codes and contract specifications.Flatiron, as part of the Hampton Roads Connector Partners (HRCP) Joint Venture has been selected to construct the new Hampton Roads Bridge Tunnel (HRBT) Expansion Project in Virginia.The multibillion dollar HRBT project scope will include: a new bridge-tunnel crossing, replacement of existing marine approach bridges, the addition of a third lane on 1-64 in each direction, and new bridge-tunnel complex that will accommodate 4 lanes of traffic for a total of 8 lanes of capacity across the water and is expected to conclude in 2025.Meets daily with project crews to review production schedule and confirm all materials, equipment and resources are readily available for production to continue on schedule and within budget.Collects, coordinates and analyzes shop drawings, design specifications, material requirements and project data through the duration of the project to ensure quality and contract specification compliance.Provides technical input for project work plan and scheduling. Identifying risk elements of production, materials, equipment or process that could negatively impact the budget or schedule.Evaluates daily production, schedule and budget projections to accurately track project performance. Documents daily activities in Company approved methods and technologies.Notifies team members and manager of any significant schedule changes and recommends solutions for management consideration.Perform additional assignments per management’s direction.Remits accurate project quantity input and controls using assigned project cost coding to ensure project financials are accurately reported. Manages cost coding with Company finance and accounting teams regarding employee time, materials, equipment and subcontractor needs.Reviews and approves daily timecards for all Company construction crews. Works with Office Manager, payroll and job construction supervisors to resolve timecard inquiries, as needed.Reviews project specifications for quality assurance at the beginning of work, during the project work and after work completes. Initiates and manages appropriate certificates, inspections and other documentation regarding construction production on the project site.Works with construction crews and engineering leaders to plan field layout on the project site, ensuring appropriate utility and commercial lines are marked before production begins. Initiates and manages any permits needed before work can begin.Conducts required Job Hazard Analysis (JHAs) to ensure a safe and compliance work environment for all construction personnel. Attends weekly safety meetings with field team and project leadership; presents field analysis as needed.Assists the estimating team with project schedules and provides technical input as needed.Assists the development of design drawings and provides technical input, as needed.Coordinates subcontractor work methods, schedule and crews as needed.Reconciles job close-out checklist with owner representative and field crews at the end of the project.Maintains knowledge of Company values and strategic plan.Bachelor's Degree in a related field required. 1+ years of construction engineering experience required. Beginner knowledge of construction equipment & techniques, drawing & specifications, building materials and required standards applicable to the project. Ability to assume responsibility, interface and communicate effectively with others.Ability to manage multiple tasks efficiently and effectively in a fast-paced environment. Skill in verbal and written communication needed. Proven self-starter and self-motivated to learn and grow knowledge. Knowledge of construction scheduling and production time management Construction engineering experience or knowledge required.Some of the benefits you may be eligible for as an employee are:Comprehensive compensation package and paid time off programIndustry leading 401(k)/RRSPMedical/Extended Health Care, Dental, Vison and/or Provincial MedicalWellness benefits & Employee Assistance ProgramTuition Reimbursement ProgramWe are an EEO/AA/ADA/Veterans employer.USD $75,000.00/Yr.USD $95,000.00/Yr.

PREVENTING ENVIRONMENTAL HARMWe go to extraordinary measures to protect our Airmen from environmental hazards and infractions. Applying engineering and scientific principles, Bioenvironmental Engineers identify and evaluate potential dangers and develop programs to prevent illness and injury. With an emphasis on discovering problems before they occur, these specialists ensure the health and safety of Airmen and their families in environments all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor of Science in engineering from an ABET-accredited institutionQualificationsCompletion of qualifying Bioenvironmental Engineering courseMinimum of 24 months of experience in bioenvironmental engineering assignmentsCompletion of Officer Training School courseMust be between the ages of 18 and have not reached your 42ndbirthday

BEST - FireBuild your best future with the Johnson Controls TeamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away! What we offerCompetitive salary starting at $56k base, plus guaranteed commission and sign-on bonus with total compensation of $83kPaid vacation/holidays/sick time – 15 days of vacation, 5 sick days, 3 floating holidaysComprehensive benefits package including but not limited to; 401k, Medical, Dental and Vision care – Available day oneEncouraging and collaborative team environmentCheck us Out: A Day in a Life at Johnson Controls | Sales Roles - YouTubeWhat you will doOur Early CareerSales Engineering (BEST) Program is a 6-month technical sales development program for Recent College Graduates that focuses on creating market share by strategic selling Johnson Controls’ Fire products and services to commercial customers. In this program you will have a chance to apply your technical engineering knowledge and business acumen to work with customers to better understand their product and project needs by being the subject matter expert. As part of the program, you will participate in a 6-month training and development program combining classroom, field orientation, and on the job training. You will learn our mechanical equipment and service offerings, customer relationship techniques and leadership skills in preparation for supporting customers in your territory alongside the sales team. You will be prepared to consult with architects, engineers, and building owners on product selections; partner with and learn from internal experts and deliver on business goals. You will be a critical part of a local sales team and a national network of sales professionals. #BEST How you will do itEstimate job bids and prepare proposals with contractors, architects and building owners Coordinate with vendors and subcontractors Complete sales calls to generate new business and build on existing relationships Present solutions to customers for consideration Collect and analyze market intelligence Turn projects over to operations team for execution and installationsWhat we look forRequired:Currently pursuing a Bachelor’s degree and graduating in December 2024 and May/June 2025 Program starts January 13, 2025 or June 9, 2025Strong analytical ability to solve problems and ability to learn quickly Ability to manage multiple projects and cross-functional teams with minimum guidance Strong communication and teamwork skills U.S. Citizenship or Permanent ResidencyPreferred:Electrical or Mechanical Engineering Degree, strongly preferred Previous sales, engineering or business experiences through co-ops, internships, part-time or full-time jobs Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Type of Requisition:RegularClearance Level Must Currently Possess:NoneClearance Level Must Be Able to Obtain:SecretSuitability:Public Trust/Other Required:NoneJob Family:SCAJob Qualifications:Skills:Military Training, Security Clearances, ValvesCertifications:Experience:1 + years of related experienceUS Citizenship Required:YesJob Description:Engineering Technician ISeize your opportunity to make a personal impact as an Engineering Technician I supporting multiple MK 41 VLS customers . GDIT is your place to make meaningful contributions to challenging projects and grow a rewarding career.At GDIT, people are our differentiator. As an Engineering Technician I you will help ensure today is safe and tomorrow is smarter. Our work depends on Engineering Technician I joining our team to MK 41 VLS HM&E equipment is maintained and tested to the stringent VLS requirements to maintain National Security.HOW AN ENGINEERING TECHNICIAN I WILL MAKE AN IMPACT This technician performs simple routine tasks under close supervision or from detailed procedures. Work is checked in progress or on completion. Will work with GDIT VLS Team to ensure operational status of contracted VLS HM&E work is completed to required procedures and specifications. This person performs one or a combination of such typical duties as: Basic maintenance and troubleshooting, fleet support, operational testing of new and overhauled valves, bench testing, assembling components and subcomponents, and installing equipment into ships. Will work with a competitive and highly trusted GDIT VLS Team To support the GDIT VLS Team provides ensures the Fleet and Program are maintained to the highest levels.WHAT YOU’LL NEED TO SUCCEED: Education: High School Diploma Required Experience: 1+ years of related experience Required Technical Skills: Ability to Remove, Overhaul, Test, and/or Install Relief Valves, Marotta Valves, Hy-Check Valves, Root(Gate) and Isolation (Butterfly) System Valves, and Hydrostatic testing and certification of Hoses, Valves, and Tanks in accordance with NAVSEA requirements, Navy MRCs, Authorized Procedures, and Technical Manuals. Security Clearance Level: Secret Required Skills and Abilities: Problem Solving, Communication, Microsoft Word, and Excel, and understanding of Test Equipment/Gauge Calibration. Preferred Skills: Military training and experience with power/hand tools. Location: Chesapeake, VA and regional area US Citizenship RequiredGDIT IS YOUR PLACE: 401K with company match Comprehensive health and wellness packages Internal mobility team dedicated to helping you own your career Professional growth opportunities including paid education and certifications Cutting-edge technology you can learn from Rest and recharge with paid vacation and holidaysThe likely hourly rate for this position is between $17.00 - $23.00. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range.Scheduled Weekly Hours:40Travel Required:Less than 10%Telecommuting Options:OnsiteWork Location:USA VA ChesapeakeAdditional Work Locations:Total Rewards at GDIT:Our benefits package for all US-based employees includes a variety of medical plan options, some with Health Savings Accounts, dental plan options, a vision plan, and a 401(k) plan offering the ability to contribute both pre and post-tax dollars up to the IRS annual limits and receive a company match. To encourage work/life balance, GDIT offers employees full flex work weeks where possible and a variety of paid time off plans, including vacation, sick and personal time, holidays, paid parental, military, bereavement and jury duty leave. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available. We regularly review our Total Rewards package to ensure our offerings are competitive and reflect what our employees have told us they value most.We are GDIT. A global technology and professional services company that delivers consulting, technology and mission services to every major agency across the U.S. government, defense and intelligence community. Our 30,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 30 countries worldwide, offering leading capabilities in digital modernization, AI/ML, Cloud, Cyber and application development. Together with our clients, we strive to create a safer, smarter world by harnessing the power of deep expertise and advanced technology.We connect people with the most impactful client missions, creating an unparalleled work experience that allows them to see their impact every day. We create opportunities for our people to lead and learn simultaneously. From securing our nation’s most sensitive systems, to enabling digital transformation and cloud adoption, our people are the ones who make change real.GDIT is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other protected class.

Description More About the Role:Leidos currently has an opening on the ‘Service Management, Integration and Transport’ (SMIT) Contract for a Transport Operations Network Security & Information Assurance Engineer position. Join our team to support the SMIT mission, the largest IT services program for the United States Navy. As part of the Leidos team, you will play a pivotal role in delivering the Navy-Marine Corps Intranet (NMCI) to customers around the globe. We are seeking a skilled Network Security & Information Assurance Engineer proficient in network security appliances and technologies (i.e. Firewalls, DMZ, IPS, VPN) to join our Transport Operations team. In this role, you will be responsible for designing, implementing, and maintaining robust & mature global network security solutions. Your expertise in configuring enterprise-grade firewalls, managing DMZ environments, configuring IPS, engineering secure VPN solutions, and administering Cisco network appliances will be crucial. You will collaborate closely with cross-functional engineering and project management teams to safeguard our network infrastructure against emerging threats and reported vulnerabilities ensuring the highest levels of security and operational integrity. You will be a member of a technical engineering team, managing customer relationships and overseeing key resources for Incident Response, Change Management, Problem Management, Operations and Maintenance (O&M), and ITSM and DevSecOps initiatives.What You'll Get to Do:•Support Current Operations for the United States Navy by providing Network Security and Network Engineering Subject Matter Expertise (SME) for the largest Intranet in the world. A qualified candidate for this position would be responsible for network modification, design, integration, test, security, and implementation of Transport Services for the as-fielded NMCI network.•Collaborates with the Network Operations Center, Network Administrators, and the Transport Operations Network Engineering Team to define and/or continuously improve: -Network Security Appliances (i.e. IPS, DMZ, VPN, Firewalls, Load Balancers). -Test and Validate Automation and best practice insertion opportunities. -Leads development of Network Security SOPs/TTPs. -Continuous Service Improvements (CSI). -System performance tuning and enhancements. -Create and maintain Engineering Implementation Plans (EIP).•Tier III escalation support and vendor engagement supporting Incident Management activities.•Extensive knowledge of defense-in-depth principles, Network and Security architecture, Modern Network Topologies, Network appliance integrity, and common networking security elements.•Plans and executes network upgrades and maintenance activities with the NMCI Operations Manager, NOC Lead, Release Management team and other key stakeholders.•Active participation in Root Cause Analysis for Problem Management activities.You'll Bring These Qualifications:•Requires B.S. Degree and 8–12 years of prior relevant experience or Masters with 6–10 years of prior relevant experience. May possess a Doctorate in technical domain (in STEM or relevant field). Work experience may be substituted at Hiring Manager’s discretion.•Currently possess an active Secret clearance or be able to obtain an Interim Secret clearance.•Minimum of DoD 8570.01 IAT Level III Certification required prior to onboarding: CISSP or CASP (See DoD 8570.01-M Appendix 3 for valid certifications).•An Associate level Network Vendor Certification is required prior to onboarding from one of the following Vendors: Cisco, Juniper, Aruba, F5, Palo Alto, McAfee, Trellix.•Network Security & IA Subject Matter Expert for operations providing Tier-III support to the NOC watch staff.•Perform highly technical maintenance and configuration to firewalls, VPNs, IPS, and load balancers.•Extensive experience engineering and troubleshooting networks, including routing, switching, MPLS, VPNs, routing protocols (i.e. BGP, OSPF, IS-IS), switching protocols (i.e. Spanning Tree Protocol, VLANs, LLDP, VoIP) Multicast protocols and emerging network technologies.•Perform Information Assurance related Government Directed Action (GDA) changes.•Effective written and oral communication and problem-solving skills.•Willingness to work or be called in to work during off-hours to meet customer mission support requirements.•Participate in on-call rotation for Incident Management responsibilities among the Transport Operations team.•Participate in engineering meetings between operations and engineering for projects deployed into production.•Strong understanding and in-depth knowledge of IP network/subnet addressing.•Experienced and adept at developing and maintaining technical documents, analysis, and reports.•Familiarity with the ITIL framework.•Ability to travel up to 25% including OCONUS potential travel.These Qualifications Would be Nice to Have:•Previous work experience providing support to the NMCI network.•Previous work experience providing support to a DoD program.•Experience with Aruba ClearPass Policy Manager (CPPM) identity management solution.•Advanced/Professional level vendor certifications (Cisco, Juniper, Aruba, F5, Palo Alto, McAfee, Trellix).•Demonstrated NET/SEC DevOps experience.•ITIL v3/v4 certification/training.•Agile certifications or applicable experience.Original Posting Date:2024-07-11While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $87,100.00 - $157,450.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Type of Requisition:PipelineClearance Level Must Currently Possess:SecretClearance Level Must Be Able to Obtain:SecretSuitability:Public Trust/Other Required:NoneJob Family:Systems EngineeringJob Qualifications:Skills:Complex Systems, Systems Engineering, System TestingCertifications:Experience:10 + years of related experienceUS Citizenship Required:YesJob Description:We are GDIT. As a trusted systems integrator for more than 50 years, General Dynamics Information Technology (GDIT) provides information technology (IT), cybersecurity, systems engineering, software development, training solutions and professional services to customers in the Navy and the broader Department of Defense.GDIT is your place. You make it your own by bringing your ideas and unique perspective to our culture. By owning your opportunity at GDIT, you are helping us ensure today is safe and tomorrow is smarter. Our work depends on a Ship Integration &Test (SI&T) Command and Control (C2) Engineer joining our team to support the Program Executive Office for Integrated Warfare Systems (PEO IWS) activities.At GDIT, people are our differentiator. As a SI&T Command and Control (C2) Engineer supporting PEO IWS, you will be trusted to bring together a multi-disciplinary team that is geographically dispersed to provide engineering planning, design, integration, installation, and test of Aegis Combat Systems (ACS) onboard ships post-construction and during maintenance availabilities. In this role, you will be responsible for ensuring the Aegis Command Decision (C&D) and Aegis Display System (ADS) are operational and available.Specific responsibilities include:Report to the AWS Engineering Lead and ATO/ATM as directed.Exercise responsibility for the C&D/ADS equipment suites (including ACEG equipment), setup configurations, equipment interfaces, proper activation and operation of C&D/ADS computing environment, configuration, data extraction requirements and interfaces, identification & resolution of system interface issues, assist with test conduct, analyze test results, support of CAPS and LIMS brief, and report findings.Assess system installation and performance and report results in support of upcoming milestones; review of related drawings and documents (including test procedures), report findings and recommendations.Provide support for crew preparations & training/trials, data collection, data analysis and fault isolation assistance as needed.Report results of testing, special events, troubleshooting, lessons learned as required.WHAT YOU’LL NEED:A Bachelor of Arts or Science (BA/BS) in the relevant field and 10+ years of experience in command and control engineering or related experience (or 15+ years of experience without a degree).A US DoD Secret security clearance is required.Ability to work collaboratively as part of the larger GDIT Navy and Marine Corps Sector.U.S. Citizenship is required.#navyacsGDIT IS YOUR PLACE:Full-flex work week to own your priorities at work and at home401K with company matchComprehensive health and wellness packagesInternal mobility team dedicated to helping you own your careerProfessional growth opportunities including paid education and certificationsCutting-edge technology you can learn fromRest and recharge with paid vacation and holidaysThe likely salary range for this position is $147,531 - $199,601. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range.Scheduled Weekly Hours:40Travel Required:10-25%Telecommuting Options:OnsiteWork Location:USA VA ChesapeakeAdditional Work Locations:USA DC Washington, USA NJ Cherry HillTotal Rewards at GDIT:Our benefits package for all US-based employees includes a variety of medical plan options, some with Health Savings Accounts, dental plan options, a vision plan, and a 401(k) plan offering the ability to contribute both pre and post-tax dollars up to the IRS annual limits and receive a company match. To encourage work/life balance, GDIT offers employees full flex work weeks where possible and a variety of paid time off plans, including vacation, sick and personal time, holidays, paid parental, military, bereavement and jury duty leave. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available. We regularly review our Total Rewards package to ensure our offerings are competitive and reflect what our employees have told us they value most.We are GDIT. A global technology and professional services company that delivers consulting, technology and mission services to every major agency across the U.S. government, defense and intelligence community. Our 30,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 30 countries worldwide, offering leading capabilities in digital modernization, AI/ML, Cloud, Cyber and application development. Together with our clients, we strive to create a safer, smarter world by harnessing the power of deep expertise and advanced technology.We connect people with the most impactful client missions, creating an unparalleled work experience that allows them to see their impact every day. We create opportunities for our people to lead and learn simultaneously. From securing our nation’s most sensitive systems, to enabling digital transformation and cloud adoption, our people are the ones who make change real.GDIT is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other protected class.

Type of Requisition:PipelineClearance Level Must Currently Possess:SecretClearance Level Must Be Able to Obtain:SecretSuitability:Public Trust/Other Required:NoneJob Family:Radio FrequencyJob Qualifications:Skills:Design, Radar Systems, System TestingCertifications:Experience:10 + years of related experienceUS Citizenship Required:YesJob Description:We are GDIT. As a trusted systems integrator for more than 50 years, General Dynamics Information Technology (GDIT) provides information technology (IT), cybersecurity, systems engineering, software development, training solutions and professional services to customers in the Navy and the broader Department of Defense.GDIT is your place. You make it your own by bringing your ideas and unique perspective to our culture. By owning your opportunity at GDIT, you are helping us ensure today is safe and tomorrow is smarter. Our work depends on a Ship Integration &Test (SI&T) SPY Engineer joining our team to support the Program Executive Office for Integrated Warfare Systems (PEO IWS) activities.At GDIT, people are our differentiator. As a SI&T SPY Engineer supporting PEO IWS, you will be trusted to bring together a multi-disciplinary team that is geographically dispersed to provide engineering planning, design, integration, installation, and test of Aegis Combat Systems (ACS) onboard ships post-construction and during maintenance availabilities. The SPY Engineer shall exercise overall responsibility for ensuring the AN/SPY Radar System is operational and available.Specific responsibilities include:Report to the AWS Engineering Lead and coordinate with the Combat System Design Engineer, Test Coordinator and Test Director for SPY System Test related matters.Exercise responsibility for AN/SPY Radar System equipment suites, setup configurations, equipment interfaces and identification of proper data extraction requirements, alignment engineering, SPY test support, special recording devices/instrumentation, and data collection media that will be required to support testing.Ensure proper activation and operation of the SPY Radar System computing environment including OE, radar safety processes, test procedure review, crew training and trials support, configuration and computer program operation and interface with other elements.Identify, report and resolve equipment and computer program issues with fault isolation, AN/SPY radar system equipment, system configuration and computer program.Provide engineering support for the interfaces and capabilities and limitations.Document test procedure discrepancies for future revision.WHAT YOU’LL NEED:A Bachelor of Arts or Science (BA/BS) in the relevant field and 10+ years of SPY radar systems engineering or related experience (or 15+ years of experience without a degree).A US DoD Secret security clearance is required.Ability to work collaboratively as part of the larger GDIT Navy and Marine Corps Sector.U.S. Citizenship is required.#navyacsGDIT IS YOUR PLACE:Full-flex work week to own your priorities at work and at home401K with company matchComprehensive health and wellness packagesInternal mobility team dedicated to helping you own your careerProfessional growth opportunities including paid education and certificationsCutting-edge technology you can learn fromRest and recharge with paid vacation and holidaysThe likely salary range for this position is $147,531 - $199,601. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range.Scheduled Weekly Hours:40Travel Required:10-25%Telecommuting Options:OnsiteWork Location:USA VA ChesapeakeAdditional Work Locations:USA DC Washington, USA NJ Cherry HillTotal Rewards at GDIT:Our benefits package for all US-based employees includes a variety of medical plan options, some with Health Savings Accounts, dental plan options, a vision plan, and a 401(k) plan offering the ability to contribute both pre and post-tax dollars up to the IRS annual limits and receive a company match. To encourage work/life balance, GDIT offers employees full flex work weeks where possible and a variety of paid time off plans, including vacation, sick and personal time, holidays, paid parental, military, bereavement and jury duty leave. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available. We regularly review our Total Rewards package to ensure our offerings are competitive and reflect what our employees have told us they value most.We are GDIT. A global technology and professional services company that delivers consulting, technology and mission services to every major agency across the U.S. government, defense and intelligence community. Our 30,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 30 countries worldwide, offering leading capabilities in digital modernization, AI/ML, Cloud, Cyber and application development. Together with our clients, we strive to create a safer, smarter world by harnessing the power of deep expertise and advanced technology.We connect people with the most impactful client missions, creating an unparalleled work experience that allows them to see their impact every day. We create opportunities for our people to lead and learn simultaneously. From securing our nation’s most sensitive systems, to enabling digital transformation and cloud adoption, our people are the ones who make change real.GDIT is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other protected class.

Type of Requisition:RegularClearance Level Must Currently Possess:SecretClearance Level Must Be Able to Obtain:SecretSuitability:Public Trust/Other Required:NoneJob Family:SCAJob Qualifications:Skills:Precision Scales, Theodolites, TroubleshootingCertifications:Experience:3 + years of related experienceUS Citizenship Required:YesJob Description:Candidate should have experience and ability to use and maintain star references, theodolites, use of lasers, precision scales, and other equipment used to acquire measure and verify all manner of shore and shipboard reference points and lines. The ability to function in various alignment team roles such as instrument man, team leader, report writer, data recorder, data base entry and Analog/Digital Inclination Data System operator.Requires:Associate's degree or equivalent experience.3+ years of experience.The likely hourly rate for this position is between $29.75 - $40.25. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range.Scheduled Weekly Hours:40Travel Required:10-25%Telecommuting Options:OnsiteWork Location:USA VA NorfolkAdditional Work Locations:Total Rewards at GDIT:Our benefits package for all US-based employees includes a variety of medical plan options, some with Health Savings Accounts, dental plan options, a vision plan, and a 401(k) plan offering the ability to contribute both pre and post-tax dollars up to the IRS annual limits and receive a company match. To encourage work/life balance, GDIT offers employees full flex work weeks where possible and a variety of paid time off plans, including vacation, sick and personal time, holidays, paid parental, military, bereavement and jury duty leave. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available. We regularly review our Total Rewards package to ensure our offerings are competitive and reflect what our employees have told us they value most.We are GDIT. A global technology and professional services company that delivers consulting, technology and mission services to every major agency across the U.S. government, defense and intelligence community. Our 30,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 30 countries worldwide, offering leading capabilities in digital modernization, AI/ML, Cloud, Cyber and application development. Together with our clients, we strive to create a safer, smarter world by harnessing the power of deep expertise and advanced technology.We connect people with the most impactful client missions, creating an unparalleled work experience that allows them to see their impact every day. We create opportunities for our people to lead and learn simultaneously. From securing our nation’s most sensitive systems, to enabling digital transformation and cloud adoption, our people are the ones who make change real.GDIT is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other protected class.

Type of Requisition:RegularClearance Level Must Currently Possess:SecretClearance Level Must Be Able to Obtain:SecretSuitability:Public Trust/Other Required:Job Family:SCAJob Qualifications:Skills:Corrective Maintenance, Group Problem Solving, Navigation Systems, TroubleshootingCertifications:Experience:6 + years of related experienceUS Citizenship Required:YesJob Description:Seize your opportunity to make a personal impact as an Engineering Technician VI supporting the US Navy. GDIT is your place to make meaningful contributions to challenging projects and grow a rewarding career.At GDIT, people are our differentiator. As an Engineering Technician VI you will help ensure today is safe and tomorrow is smarter. Our work depends on Engineering Technician VI joining our team to troubleshoot, repair and assessshipboard IC/Navigation systems.WHAT YOU’LL NEED TO SUCCEED:Candidates resume must show classroom training for Navigation Systems Maintenance Technician NEC that the Navy C School provides demonstrating in-depth knowledge of shipboard IC/Navigation systems including a minimum of six (6) years in-depth knowledge troubleshooting, repairing and assessing shipboard IC/Navigation systems. Technician shall demonstrate a minimum of three (6) years hands-on experience on each of the listed systems. Experience may be concurrent:The official NEC# is V31B, or 96176 years experience with the following systems:• WSN-7 RLGN• IBS/Integrated Bridge Navigation System (IBNS)• Voyage Management System (VMS)• AN/SSN-6 Navigation Sensor System Interface (NAVSSI) This one is key and almost mandatory• Global Positioning System Based Positioning (GPNTS)• Navigation Critical Distribution System (NCDS)• Ships Control System Government (SCS-Gov)Active Secret Clearance RequiredGDIT IS YOUR PLACE: 401K with company match Comprehensive health and wellness packages Internal mobility team dedicated to helping you own your career Professional growth opportunities including paid education and certifications Cutting-edge technology you can learn from Rest and recharge with paid vacation and holidaysThe likely hourly rate for this position is between $33.52 - $43.70. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range.Scheduled Weekly Hours:40Travel Required:Less than 10%Telecommuting Options:OnsiteWork Location:USA VA NorfolkAdditional Work Locations:Total Rewards at GDIT:Our benefits package for all US-based employees includes a variety of medical plan options, some with Health Savings Accounts, dental plan options, a vision plan, and a 401(k) plan offering the ability to contribute both pre and post-tax dollars up to the IRS annual limits and receive a company match. To encourage work/life balance, GDIT offers employees full flex work weeks where possible and a variety of paid time off plans, including vacation, sick and personal time, holidays, paid parental, military, bereavement and jury duty leave. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available. We regularly review our Total Rewards package to ensure our offerings are competitive and reflect what our employees have told us they value most.We are GDIT. A global technology and professional services company that delivers consulting, technology and mission services to every major agency across the U.S. government, defense and intelligence community. Our 30,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 30 countries worldwide, offering leading capabilities in digital modernization, AI/ML, Cloud, Cyber and application development. Together with our clients, we strive to create a safer, smarter world by harnessing the power of deep expertise and advanced technology.We connect people with the most impactful client missions, creating an unparalleled work experience that allows them to see their impact every day. We create opportunities for our people to lead and learn simultaneously. From securing our nation’s most sensitive systems, to enabling digital transformation and cloud adoption, our people are the ones who make change real.GDIT is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other protected class.

Type of Requisition:RegularClearance Level Must Currently Possess:NoneClearance Level Must Be Able to Obtain:NoneSuitability:Public Trust/Other Required:NoneJob Family:SCAJob Qualifications:Skills:Diagnostic Equipment, Electronic Circuitry, Technical KnowledgeCertifications:Experience:1 + years of related experienceUS Citizenship Required:YesJob Description:· Installs, maintains, repairs, overhauls, troubleshoots, modifies, constructs and tests various types of electrical, electronic, and mechanical equipment and related devices on board Naval Vessels · Applies technical knowledge of electronics principles to put equipment in operational condition and solve moderately complex problems. · Troubleshoots and corrects malfunctions using specialized test and diagnostic equipment. · Modifies circuitry to improve performance. · Makes recommendations for improvements or modifications to correct problems. · May provide operation and maintenance instruction to customer personnel. · Performs preventative maintenance. · Participates in special projects, as required. #hireshipyardcareersgditThe likely hourly rate for this position is between $19.08 - $24.66. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range.Scheduled Weekly Hours:40Travel Required:10-25%Telecommuting Options:OnsiteWork Location:USA VA NorfolkAdditional Work Locations:Total Rewards at GDIT:Our benefits package for all US-based employees includes a variety of medical plan options, some with Health Savings Accounts, dental plan options, a vision plan, and a 401(k) plan offering the ability to contribute both pre and post-tax dollars up to the IRS annual limits and receive a company match. To encourage work/life balance, GDIT offers employees full flex work weeks where possible and a variety of paid time off plans, including vacation, sick and personal time, holidays, paid parental, military, bereavement and jury duty leave. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available. We regularly review our Total Rewards package to ensure our offerings are competitive and reflect what our employees have told us they value most.We are GDIT. A global technology and professional services company that delivers consulting, technology and mission services to every major agency across the U.S. government, defense and intelligence community. Our 30,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 30 countries worldwide, offering leading capabilities in digital modernization, AI/ML, Cloud, Cyber and application development. Together with our clients, we strive to create a safer, smarter world by harnessing the power of deep expertise and advanced technology.We connect people with the most impactful client missions, creating an unparalleled work experience that allows them to see their impact every day. We create opportunities for our people to lead and learn simultaneously. From securing our nation’s most sensitive systems, to enabling digital transformation and cloud adoption, our people are the ones who make change real.GDIT is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other protected class.

Type of Requisition:PipelineClearance Level Must Currently Possess:Interim SecretClearance Level Must Be Able to Obtain:SecretSuitability:Public Trust/Other Required:Job Family:Systems EngineeringJob Qualifications:Skills:Systems Development, Systems Engineering, Technical EngineeringCertifications:Experience:10 + years of related experienceUS Citizenship Required:YesJob Description:Manage and execute engineering activities that include developing technical approaches and plans that support customer’s desired capabilities, determination of scope of work tasks to complete the technical effort and estimating time to accomplish the work tasks and establishing feasible schedules based on resource availability on systems.Job DescriptionDevelops advanced engineering concepts and guides development to a final productDevelops advanced solutions to a variety of highly complex engineering problemsDevelop and implement an approach for the capture, analysis and trace of artifacts that provide the requirements of the system’s performance, function and allocated baseline and maintain traceability from engineering products back to user defined capabilitiesProvide systems and technical engineering services by implementing disciplined System Engineering processes across tactical and training systems. Engineering services include planning, developing hardware requirements, interface design, testing, configuration management, data management, decision analysis, technical review, fielding support and documentationSupport software (SW) engineering development and support services on systemsSupport the operational requirement/user/operational test community to ensure the concept of operations (CONOPS) is detailed enough to verify and validate system performance and operational capability.Develop design reference missions, use cases, Systems Modeling Language and Unified Model Language model diagramsEstimate time to accomplish the work tasks and establish feasible schedules and resourcesEducation and ExperienceMaster's level degree in an engineering discipline; Ten (10) years of professional experience in systems engineering in any of the following areas: requirements definition, system design parameters, concept operation, risk assessment, productivity studies/analyses, performance analyses, test and evaluation, post-delivery support.OrBachelor's level degree in an engineering discipline with twelve (12) years of professional experience in systems engineering in any of the following areas: requirements definition, system design parameters, concept operation, risk assessment, productivity studies/analyses, performance analyses, test and evaluation, post-delivery support.Desired Professional Experience: Engineering experience supporting U.S. Navy providing services and support for Combat Systems that range from unit level systems such as Sensor Distribution Systems (SDS), Ship Self Defense System (SSDS), AEGIS, ZUMWALT, Integrated Combat System (ICS) and any future Combat Systems to operational level Command, Control, Communications, Computers, Combat Systems, Cyber security, Intelligence, Surveillance, and Reconnaissance (C6ISR) is highly desired.Clearance: Secret or Interim SecretLocation: Virginia Beach/Chesapeake VAGDIT IS YOUR PLACE: Full-flex work week to own your priorities at work and at home 401K with company match Comprehensive health and wellness packages Internal mobility team dedicated to helping you own your career Professional growth opportunities including paid education and certifications Cutting-edge technology you can learn from Rest and recharge with paid vacation and holidaysThe likely salary range for this position is $138,859 - $187,867. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range.Scheduled Weekly Hours:40Travel Required:Less than 10%Telecommuting Options:OnsiteWork Location:USA VA Virginia BeachAdditional Work Locations:Total Rewards at GDIT:Our benefits package for all US-based employees includes a variety of medical plan options, some with Health Savings Accounts, dental plan options, a vision plan, and a 401(k) plan offering the ability to contribute both pre and post-tax dollars up to the IRS annual limits and receive a company match. To encourage work/life balance, GDIT offers employees full flex work weeks where possible and a variety of paid time off plans, including vacation, sick and personal time, holidays, paid parental, military, bereavement and jury duty leave. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available. We regularly review our Total Rewards package to ensure our offerings are competitive and reflect what our employees have told us they value most.We are GDIT. A global technology and professional services company that delivers consulting, technology and mission services to every major agency across the U.S. government, defense and intelligence community. Our 30,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 30 countries worldwide, offering leading capabilities in digital modernization, AI/ML, Cloud, Cyber and application development. Together with our clients, we strive to create a safer, smarter world by harnessing the power of deep expertise and advanced technology.We connect people with the most impactful client missions, creating an unparalleled work experience that allows them to see their impact every day. We create opportunities for our people to lead and learn simultaneously. From securing our nation’s most sensitive systems, to enabling digital transformation and cloud adoption, our people are the ones who make change real.GDIT is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other protected class.

Type of Requisition:PipelineClearance Level Must Currently Possess:Interim SecretClearance Level Must Be Able to Obtain:SecretSuitability:Public Trust/Other Required:Job Family:Mechanical EngineeringJob Qualifications:Skills:Design, Engineering Development, Mechanical EngineeringCertifications:Experience:7 + years of related experienceUS Citizenship Required:YesJob Description:Manage and provide hardware (HW) and integration engineering for electro-mechanical systems.Job DescriptionProvide hardware (HW) engineering for systems for product enclosures, heat transfer design of systems, kit optimization, designing of electrical circuits that minimize Space Weight And Power (SWAP)Provide design of manufactured componentsSupport design reviews and improvements, design drawing packages, circuit diagrams and cable/harness designs and drawings and develop hardware changes as part of Engineering Change Proposal (ECP) implementation.Provide support for hardware design, installation, trouble shooting, maintenance, and technical analysis as well as system, subsystem and all component repairs and board/unit level diagnosis and remediationDevelop, review, and comment on proposed engineering changes, waivers, deviations, and alterations to determine impact on performance, reliability, maintainability, availability, quality, safety, and life cycle cost.Provide technical support to assemble, integrate, test, document, troubleshoot, install, and repair and service prototypes, Engineering Development Modules (EDMs), systems of systems, frameworks, and obsolescence support for fielded systems and test articlesProvide system installation, trouble shooting and maintenance, technical analysis, system, subsystem and all component repairs, as well as board and unit level diagnosticsDevelop failure cause analysis, remediation of failures and develop plan to eliminate future failuresDevelop and/or modify hardware and software components as part of approved engineering changesProvide technical support to assemble, integrate, test, troubleshoot, resolve design issues, install, repair and maintain components and assemblies.Education and Experience:Bachelor's level degree in Mechanical EngineeringSeven (7) years of professional experience working in an engineering capacity in the design, development, production, or testing electronic/electro-mechanical and/or hydro-electronic equipmentDesired Professional ExperienceEngineering experience supporting U.S. Navy providing services and support for Combat Systems that range from unit level systems such as Sensor Distribution Systems (SDS), Ship Self Defense System (SSDS), AEGIS, ZUMWALT, Integrated Combat System (ICS) and any future Combat Systems to operational level Command, Control, Communications, Computers, Combat Systems, Cyber security, Intelligence, Surveillance, and Reconnaissance (C6ISR) is highly desired.Clearance: Secret or Interim SecretLocation: Virginia Beach/ Chesapeake VAGDIT IS YOUR PLACE: Full-flex work week to own your priorities at work and at home 401K with company match Comprehensive health and wellness packages Internal mobility team dedicated to helping you own your career Professional growth opportunities including paid education and certifications Cutting-edge technology you can learn from Rest and recharge with paid vacation and holidaysThe likely salary range for this position is $91,034 - $123,164. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range.Scheduled Weekly Hours:40Travel Required:Less than 10%Telecommuting Options:OnsiteWork Location:USA VA Virginia BeachAdditional Work Locations:Total Rewards at GDIT:Our benefits package for all US-based employees includes a variety of medical plan options, some with Health Savings Accounts, dental plan options, a vision plan, and a 401(k) plan offering the ability to contribute both pre and post-tax dollars up to the IRS annual limits and receive a company match. To encourage work/life balance, GDIT offers employees full flex work weeks where possible and a variety of paid time off plans, including vacation, sick and personal time, holidays, paid parental, military, bereavement and jury duty leave. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available. We regularly review our Total Rewards package to ensure our offerings are competitive and reflect what our employees have told us they value most.We are GDIT. A global technology and professional services company that delivers consulting, technology and mission services to every major agency across the U.S. government, defense and intelligence community. Our 30,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 30 countries worldwide, offering leading capabilities in digital modernization, AI/ML, Cloud, Cyber and application development. Together with our clients, we strive to create a safer, smarter world by harnessing the power of deep expertise and advanced technology.We connect people with the most impactful client missions, creating an unparalleled work experience that allows them to see their impact every day. We create opportunities for our people to lead and learn simultaneously. From securing our nation’s most sensitive systems, to enabling digital transformation and cloud adoption, our people are the ones who make change real.GDIT is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other protected class.

Type of Requisition:RegularClearance Level Must Currently Possess:Top Secret/SCIClearance Level Must Be Able to Obtain:Top Secret/SCISuitability:Public Trust/Other Required:NoneJob Family:Network EngineeringJob Qualifications:Skills:Help Desk Support, Network Monitoring, Network Operations, Solarwinds, Trouble TicketingCertifications:Security + Certification - CompTIAExperience:3 + years of related experienceUS Citizenship Required:YesJob Description:Network Engineer AssociateJoin our technology leading team of men and women that solve some of the world’s most complex technical challenges. GDIT is seeking an enthusiastic Junior Network Engineer seeking to expand his/her experience in the IT field by joining our team in support of the Intelligence, Surveillance, and Reconnaissance (ISR) mission of the Airforce at Langley AFB, Va.The Network Engineering team supports the Air Forces’ Distributed Common Ground System (DCGS) Processing, Exploitation, Dissemination (PED) Operations Center. Specifically, you will be providing Tier-1 Network monitoring, Operational Support, and Help Desk services across a global enterprise.Task: Network Monitoring/Help Desk Support Subtasks. Conduct fault management to detect, isolate, and correct abnormal network and information processing system component anomal i esMonitorallnodes for operational integrityRespond to trouble callsInitiate and maintain trouble tickets and other logs to document these anomalies as well as corrective actionsPopulate and examine trouble and error logs for troubleshooting and capturing metricsProvide technical support to resolve the problem or escalate to the appropriate levelMonitor and administer network tools for troubleshooting and metrics for trends analysisLog all network issues utilizing the 480 ISRW approved system of record for problems, errors, and maintenance in such a way to easily generate reports for trend analysisProvide technicalsupportindata network planning,engineering,anddesignReport all trouble calls upon receipt to the Mission Control Center (MCC) in the Operations Center and provide hourly updates until resolution unless otherwise directed by the DOC Crew CommanderProvide quarterly metrics illustrating trends and workload to the Ops Supervisor in the form of a PowerPoint presentationRequirements:TS/SCIClearanceShiftwork: 4 days on/3 days off (10 hr days)Minimumofthree(3) years’ofnetworkoperationsexperiencePossess IAT Level II - Security Plus CertificationDemonstrated knowledge of network monitoring tools Location: On Customer Site US Citizenship RequiredGDIT IS YOUR PLACE: 401K with company match Comprehensive health and wellness packages Internal mobility team dedicated to helping you own your career Professional growth opportunities including paid education and certifications Cutting-edge technology you can learn fromThe likely salary range for this position is $58,650 - $79,350. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range.Scheduled Weekly Hours:40Travel Required:Less than 10%Telecommuting Options:OnsiteWork Location:USA VA Langley AFBAdditional Work Locations:Total Rewards at GDIT:Our benefits package for all US-based employees includes a variety of medical plan options, some with Health Savings Accounts, dental plan options, a vision plan, and a 401(k) plan offering the ability to contribute both pre and post-tax dollars up to the IRS annual limits and receive a company match. To encourage work/life balance, GDIT offers employees full flex work weeks where possible and a variety of paid time off plans, including vacation, sick and personal time, holidays, paid parental, military, bereavement and jury duty leave. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available. We regularly review our Total Rewards package to ensure our offerings are competitive and reflect what our employees have told us they value most.We are GDIT. A global technology and professional services company that delivers consulting, technology and mission services to every major agency across the U.S. government, defense and intelligence community. Our 30,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 30 countries worldwide, offering leading capabilities in digital modernization, AI/ML, Cloud, Cyber and application development. Together with our clients, we strive to create a safer, smarter world by harnessing the power of deep expertise and advanced technology.We connect people with the most impactful client missions, creating an unparalleled work experience that allows them to see their impact every day. We create opportunities for our people to lead and learn simultaneously. From securing our nation’s most sensitive systems, to enabling digital transformation and cloud adoption, our people are the ones who make change real.GDIT is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other protected class.

Type of Requisition:RegularClearance Level Must Currently Possess:SecretClearance Level Must Be Able to Obtain:Top Secret/SCISuitability:Public Trust/Other Required:NoneJob Family:Network EngineeringJob Qualifications:Skills:Network Architecture, Network Engineering, Routing and SwitchingCertifications:Experience:5 + years of related experienceUS Citizenship Required:YesJob Description:Please take this opportunity to join one of GDIT’s fastest long-standing growing programs! US Battlefield Information Collection and Exploitation System eXtended (US BICES-X) is a cutting-edge program supporting DoD intelligence information sharing on current and emerging global threats to mission and coalition partners and emerging nations. With an internationally dispersed team supporting each combatant command, the US BICES-X team is in direct support of the war fighter and their missions. We are seeking a creative and driven professional with a passion for solving real world issues on a cross-functional, fast paced team.As a Senior Network Engineer, your role is to ensure the stability, integrity and efficient operation of the in-house information systems that support the USBICES-X program. This is achieved by monitoring, maintaining, supporting, and optimizing all networked software associated operating systems. The Senior Network Engineer will apply communication, analytical, and problem-solving skills to help identify, communicate, and resolves issues to maximize the benefit of IT systems investments.Responsibilities:Strategy & PlanningCollaborate with network staff to ensure smooth and reliable operation of software and systems for fulfilling business objectives and processes.Work with executive team members, decision makers, and stakeholders to define business requirements and systems goals, and to identify and resolve business systems issues.Acquisition & Deployment Designs and defines network architecture for new or existing computer systemsPerforms complex network development and design work.Participates in the upgrading of operating systems and design of network enhancements.Provides input for documentation on new or existing networks.Develops and conducts tests to ensure networks meet documented user requirements.Operational Management Identifies, analyzes, and resolves network problems.Provides network/equipment/specialized training and technical guidance.Determines network specifications, input/output processes, and working parameters for hardware/software compatibility.May provide guidance and leadership to less-experienced systems engineers.Maintains current knowledge of relevant technology as assigned.Comprehensive knowledge of network engineering principles, methods, and techniques.Knowledge of the associated hardware, software, and equipment.Knowledge of Data Center and VirtualizationKnowledge of Automation techniques and structureParticipates in special projects as assigned.Required Qualifications:5+ years of related Network Engineering experience.Must possess and maintain a SECRET security clearance with the ability to be upgraded to TS/SCI.BA/BS degree or equivalent experience Must possess a completed CCNA certification.Must meet DOD 8750 requirements and be eligible for IAT level II access upon hire for positions with elevated privileges and must obtain ITIL V4 Foundation within six months of hire. Additional specific certifications may be required, depending on job assignment.Ability to work in a team-oriented, collaborative environment.Ability to work efficiently in a fast-paced environment and multi-task while still ensuring high quality of workHighly organized with strong ability to prioritize work and work autonomouslyExcellent verbal and written communication skillsGreat attention to detail and presentationResults driven, highly efficient, energetic and highly motivatedThe work is typically performed at client site locations, which requires proper safety precautions; work may require some physical effort in the handling of light materials, boxes or equipment.Preferred Qualifications:Experience with VMWare NSX-TKnowledge and experience with routing and switching protocols (e.g. OSPF, EIGRP, BGP, Spanning Tree Protocol, ISAKMP, ESP, SIP, SCCP, etc.)Knowledge and experience with current Cisco IOS software and hardware featuresKnowledge and experience with current Juniper JUNOS software and hardware featuresAbility to configure and troubleshoot MulticastAbility to configure and troubleshoot DMVPN and GRE tunnelsDepending on job assignment, additional specific certifications may be required.Knowledge and experience with VoIP/collaboration systemsKnowledge and experience with HAIPE-based encryption devicesKnowledge of Virtualization technologies: VMware, Citrix, and Microsoft Knowledge and experience with data center networkingExperience with firewalls and firewall rule sets Understanding of network virtualizationUnderstanding of concepts presented in the VMware Data Center Virtualization Fundamentals courseKnowledge of Automation for NetworksAdditional Experience Desirable:F5 LTM BIG-IPRiverbed Steelhead OptimizationPuppet, Ansible, Python, API based AutomationThe likely salary range for this position is $86,530 - $117,070. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range.Scheduled Weekly Hours:40Travel Required:Less than 10%Telecommuting Options:OnsiteWork Location:USA VA Langley AFBAdditional Work Locations:Total Rewards at GDIT:Our benefits package for all US-based employees includes a variety of medical plan options, some with Health Savings Accounts, dental plan options, a vision plan, and a 401(k) plan offering the ability to contribute both pre and post-tax dollars up to the IRS annual limits and receive a company match. To encourage work/life balance, GDIT offers employees full flex work weeks where possible and a variety of paid time off plans, including vacation, sick and personal time, holidays, paid parental, military, bereavement and jury duty leave. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available. We regularly review our Total Rewards package to ensure our offerings are competitive and reflect what our employees have told us they value most.We are GDIT. A global technology and professional services company that delivers consulting, technology and mission services to every major agency across the U.S. government, defense and intelligence community. Our 30,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 30 countries worldwide, offering leading capabilities in digital modernization, AI/ML, Cloud, Cyber and application development. Together with our clients, we strive to create a safer, smarter world by harnessing the power of deep expertise and advanced technology.We connect people with the most impactful client missions, creating an unparalleled work experience that allows them to see their impact every day. We create opportunities for our people to lead and learn simultaneously. From securing our nation’s most sensitive systems, to enabling digital transformation and cloud adoption, our people are the ones who make change real.GDIT is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other protected class.

Type of Requisition:RegularClearance Level Must Currently Possess:Top Secret/SCIClearance Level Must Be Able to Obtain:Top Secret/SCISuitability:Public Trust/Other Required:NoneJob Family:Network EngineeringJob Qualifications:Skills:Cisco Routers and Switches, Information Technology (IT), Network InfrastructuresCertifications:CCNA - Cisco, Security Plus - CompTIAExperience:7 + years of related experienceUS Citizenship Required:YesJob Description:Network Engineer SeniorJoin the team of men and women that solve some of the world’s most complex technical challenges. GDIT is seeking a Sr Network Engineer to join the DCGS Operations Center (DOC) program at Langley AFB, VA.The Senior Network Engineer supports the Distributed Common Ground System (DCGS) Processing, Exploitation, Dissemination (PED) Operations Center (DOC). The Senior Network Engineer performs the configuration, integration, and upgrade of all network architectural components across the AF DCGS Enterprise. Task: Tier 3 Network Infrastructure Management Establish system performance parameters and sample critical network and information processing Conduct network trend analysis and create reports and graphs monthly Sort and file network traffic based on source and destination internet protocol (IP) addresses as needed Establish baseline network configuration and performance parameters in support of unique ISR sensor data Conduct network analysis to ensure performance of the network Support design, installation, and integration of new routers and other equipment on the enterprise Establish proper data flows between DCGS and other Enterprise nodes Maintain network interface/port configurations, IP routing tables, firewall settings, filter tables, passwords, and performance controls Maintain version control of the router operating system software at Government direction Establish configuration and modification of device settings protecting the DCGS Security Boundary through Access Control Lists Manage and operate software applications at all sites required to conduct network management of the DPA Respond to hardware and software problems related to DPA equipment Coordinate with Government leads to optimize Campus Area Network (CAN) routers, switches, and cryptographic devices Install CAN/WAN equipment and develop and maintain documentation and drawings Develop and enforce a comply-to-connect standard for the DPA Review all integration efforts to ensure engineering rigor and security practices are maintained across the DPA and advise Government leadership regarding any possible risks/concerns/improvements Process and implement all network service request’s (NSR) and security approved ports and services requests (PSR) Perform transition planning, integration, operations and maintenance (O&M) of ATM to Carrier Ethernet/OTN, to include out-of-band network management Develop and execute OTN test plan and procedures Review requirements provided by the DCGS Program Office to determine bandwidth, performance, and Controlled Interface (CI) settings for establishing network configuration baselines and provide input back to COR or designated representative within 7 days of receipt Requirements:TS/SCI ClearanceMinimum of seven (7) years of Network Infrastructure Management experience Possess an IAT Level II certification and CCNP. CCNP may be substituted for CCNA and (4) years of enterprise networking experience Location: On Customer Site US Citizenship RequiredGDIT IS YOUR PLACE: 401K with company match Comprehensive health and wellness packages Internal mobility team dedicated to helping you own your career Professional growth opportunities including paid education and certifications Cutting-edge technology you can learn from Rest and recharge with paid vacation and holidaysThe likely salary range for this position is $96,900 - $131,100. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range.Scheduled Weekly Hours:40Travel Required:10-25%Telecommuting Options:OnsiteWork Location:USA VA Langley AFBAdditional Work Locations:Total Rewards at GDIT:Our benefits package for all US-based employees includes a variety of medical plan options, some with Health Savings Accounts, dental plan options, a vision plan, and a 401(k) plan offering the ability to contribute both pre and post-tax dollars up to the IRS annual limits and receive a company match. To encourage work/life balance, GDIT offers employees full flex work weeks where possible and a variety of paid time off plans, including vacation, sick and personal time, holidays, paid parental, military, bereavement and jury duty leave. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available. We regularly review our Total Rewards package to ensure our offerings are competitive and reflect what our employees have told us they value most.We are GDIT. A global technology and professional services company that delivers consulting, technology and mission services to every major agency across the U.S. government, defense and intelligence community. Our 30,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 30 countries worldwide, offering leading capabilities in digital modernization, AI/ML, Cloud, Cyber and application development. Together with our clients, we strive to create a safer, smarter world by harnessing the power of deep expertise and advanced technology.We connect people with the most impactful client missions, creating an unparalleled work experience that allows them to see their impact every day. We create opportunities for our people to lead and learn simultaneously. From securing our nation’s most sensitive systems, to enabling digital transformation and cloud adoption, our people are the ones who make change real.GDIT is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other protected class.