We are looking for Flaggers to join our team!
The Flagger is responsible for directing the flow of traffic around construction sites, road maintenance areas, and other work zones. This role involves setting up and taking down traffic control signs, cones, and barricades to ensure the safety of workers and the public. The Flagger uses hand signals, signs, and other traffic control devices to communicate with motorists and guide them safely through or around the work area. The position requires excellent attention to detail, the ability to work outdoors in various weather conditions, and the capability to stand for extended periods.
Set up signs, cones, and other traffic control devices around work areas to divert traffic. Effectively manage traffic flow with stop/slow paddles. Maintain clear and effective communication with team members using two-way radios. Regularly required to stand and walk and reach with hands and arms for up to 10 hours a day. Ability to lift, carry, push, pull, and move items over 50 pounds. Drive company vehicles to transport traffic control equipment to and from job sites. Perform routine vehicle inspections and maintenance checks to ensure vehicles are in good working condition. Regularly exposed to outside weather conditions, moving equipment and machinery parts, moving traffic, fumes, and airborne particles. Noise level of the work environment is usually moderate to loud. Adhere to all Company Policies and Procedures. Perform other duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer
Requirements: Valid Driver’s License. Must pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Operate 2-way radio. Willingness to work in various weather conditions and traffic settings. Provide effective communication with contractors and internal teams while delivering the highest level of customer service. Work well in a team environment. Must have excellent attendance, reliable transportation, and a strong work ethic. Successfully complete the ATSSA Flagger training course and company-sponsored Defensive Driver training. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule.
We are an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: The role of the Field Service Technician Level 3 is to travel to customer sites, provide service and resolve technical product issues. The services provided may consist of troubleshooting complex problems with equipment, commissioning, repair, maintenance and training of electric actuators and related equipment. The Field Service Technician installs, commissions, monitors, troubleshoots, and repairs Flowserve’s equipment across industries such as oil and gas, chemical, nuclear, coal, and wastewater industries, depending on the customer engagement. In this challenging position the Field Service Technician (FST) provides real-time technical support to our customers, and provides recommendations for repairs, upgrades, and replacement equipment. The FST is actively engaged in troubleshooting problems and implementing solutions onsite at nearby customer facilities. Our Field Service Technician team is the face of Flowserve, and we count on them to deliver a world-class service to our customers, creating a lasting competitive advantage for our products and services. Remote Role: Must live near a major airport anywhere in the United States Responsibilities Include: Make direct, in-person service calls in response to customer requests.Assess mechanical & electrical problems and take actions to resolve promptly.Work side-by-side with our customer’s personnel, and lead work crews as required.Oversee the full cycle of repair: disassembly, cleaning, inspection, repair, and assembly.Ensure that equipment is installed successfully and on schedule.Check equipment prior to start-up and assess start-up performance.Monitor the maintenance and performance of Flowserve equipment.Train customers in the proper procedures for operating and maintaining Flowserve products.Collaborate effectively with the supporting organizations of Flowserve, including the repair centers, customer service, and sales engineering.Maintain and submit organized, accurate records, including daily reports, jobs quoted, jobs performed, and time and materials charged.Other duties as assigned. Requirements: Associate degree (A. A.) or equivalent from a two-year college or technical school and (5) years of related experience, or equivalent combination of education and related experience.Knowledgeable about the industrial applications and operations of equipment.Experience with installing electromechanical equipment.Experience with repairing equipment.Proven ability to correctly read and interpret blueprints, engineering drawings, and schematicsMust be a self-starter with good follow-through, capable of working independently with little supervision.Capable in Outlook, Word, and ExcelAn active driver’s license with a good driving record is essential to the role.Able to travel up to 50% or moreAble to work overtime as required to minimize impact to customersPhysical activity is required, including frequent lifting up to 50 pounds / 25kg, ascending/descending ladders and staircases, and climbing and reaching in, under, and around large equipment, often outside year-round.Excellent communication skillsGood organizational skillsCommunicate by word and actions Flowserve’s values for ethics, safety, and qualityMust live near a major airport Preferred Experience / Skills: Professional certifications in this field.Ability to work collaboratively with unfamiliar teams. Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits! Req ID : R-11794 Job Family Group : Operations Job Family : OP Field Service EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

Req ID:445157Address: 23728 Rogers Clark Blvd Ruther Glen, VA, 22546Benefits:* Fuel Your Growth with Love's - company funded tuition assistance program * Paid Time Off * Flexible Scheduling * 401(k) – 100% match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Welcome to Love’s!Diesel Technicians work in a fast-paced environment and maintain clean places with friendly faces. You will interact with customers & drivers from all over, making their travels and their day better. Job Functions: Troubleshoot and repair light mechanical issues that may include wheel-end assemblies, electrical systems, suspensions, A/C, or engine componentsAssist customers with roadside servicesProvide preventative maintenance servicesAbility to move, lift 75+ pounds working in close quarters. Ability to work in various temperatures.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Work a rotating schedule that alternates between day and night as needed.Ability to obtain a medical card through the Department of Transportation. (paid by Love’s) Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Unleash your potential with theJohnson Controlsteam!As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing.Join theJohnson Controlsfamily and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offerCompetitive pay.Paid vacation and selected holidays.Union benefits: Health, Dental, and Vision.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Check us out! A Day in the Life of the Building of the Future.:https://youtu.be/pdZMNrDJviYWhat you will doWe are looking for a skilled HVAC systems Journeyman who has worked in residential, light commercial, and/or heavy commercial markets to join our team to work the most advanced heavy commercial and industrial cutting-edge equipment.How will you do itWe provide factory certification through our Service Technical Academy (STA) with milestone recognition and monetary rewards and advancement, increased incentive opportunities for executed pull-through work, top-of-the-line technology, equipment, and uniforms and a #1 focus on employee safety. We will equip you with tools and a vehicle to perform your job at the highest standard.Servicemen must have practical working experience in residential, light commercial or commercial mechanical equipment. May be required to satisfactorily pass an examination as to identify special skills. The scope of work shall be limited to commercial HVAC/R service. Journeymen in the repair of centrifugal, steam turbines, and absorption machines and open-drive screw chillers.Perform maintenance, repair and replacement services on commercial heating and cooling systems.What we look forRequiredHigh School Diploma or equivalent.Two (2) years of Commercial and/or industrial, mechanical troubleshooting experience in the HVAC industry.Ability to commit to a 30-Hour OSHA Certification which is to be done after hours and on weekends is required upon hireComputer savvy with good verbal and written communication skills.PreferredFive (5) years of Commercial and or industrial work experience in the HVAC industryRefrigeration Certification preferredEPA Universal Refrigerant Certification

The CSC ServiceWorks Story: We’re the leading provider of commercial laundry services, consumer services technology, and air-vending and EV solutions throughout the United States and Canada.Our Best-in-Class team of 2,500 dedicated professionals’ benefit from work that’s steady (but never boring), time to enjoy what matters, appreciation and rewards in return for hard work and accountability, and support in growing a fulfilling career. Overview: Appliance Install DriverMonday - FridayAs a CSC Appliance Install Driver your days will be active,delivering and installing laundry and/or air vending equipment to a variety of places in your assigned service area. You’ll have a constant change of scenery, engage with clients and consumers daily, and learn new technology in an environment that supports your success in both your career and life.Position Duties:Deliver and Installlaundry or air equipment to customer's homes and client locationsDeliver and Install ancillary technology (card readers, digital enhancements)Drive a box truck to deliver, pick up, or repair/replace washers, dryers and/or air machinesPrepare equipment for delivery (assemble required parts prior to loading on trucks)Instruct customers and/or clients how to operate equipment in a safe and effective mannerStaying physically active loading and unloading your company truck using a 2-wheeled hand cart for support, ease and safety. Benefits & Perks: Work Life Balance!75% Employer Contribution to Medical, Dental, and Vision insuranceHealth Savings Account with Employer ContributionYear-round Work & Paid TrainingCompany Paid Life, Short-term, and Long-term Disability Insurance401k with generous Company MatchPaid Time Off (PTO) & Holiday PayFlexible Spending & Health Savings AccountEmployee Discounts: Travel, Theme Parks, Home & Auto Insurance and more!Education Reimbursement ProgramPaid employee Referral program What we’re looking for: Position Requirements:High School diploma or equivalentValid Driver's LicenseMust be 21 years of age or olderAbility to pass pre-employment screeningDOT Certification is a plus!1 year of job-related experience in the areas of delivery and installation (preferred) training is providedMechanical & Maintenance Experience/KnowledgeExperience driving box trucksAbility to lift up to 100lbs in a variety of environmental conditions (both weather and non-weather related)Knowledge with computers and smart phone technologyTroubleshootingRoute Driving Experience a plus!Customer ServiceVisit our Careers Website atwww.cscsw.comto learn more about our available opportunities and the benefits of working for CSC ServiceWorks.CSC ServiceWorks is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status.

Location: Dahlgren, Virginia, USATelework: HybridClearance: Interim Secret (US Citizenship Required)Experience: Mid-LevelNumber of Openings: 1Funding Status: FundedSalary Range: $90,000 - $135,000 (Please see below for more info on salary) Journeyman Unity3D Developer SimVentions is a 100% employee-owned business and has consistently been voted one of Virginia's Best Places to Work. We are looking for an experienced developer with proficiency in Unity3D, C#, and excellent communication and teaming skills to support a small Agile development team developing simulation software. This position is located on-site at our Dahlgren, VA office with some potential hybrid telework. Candidates will be asked to provide references and to provide examples during interviews. Responsibilities: Produce original code utilizing Unity3D and C#, as well as other SW development toolsReview and troubleshoot existing codeProvide brief, clear, focused code commentsActively participate in daily Scrum activitiesUtilize excellent communication skills to provide ideas and feedback to other developers, testers, and management in a professional manner Requirements: United States Citizenship is required to obtain an Interim Secret ClearanceAt least five (5) years of experience with Unity3D and C# software developmentActive Security+ certAbility to read Interface control documents and implement messaging between systemsIdentify Friend Foe (IFF) knowledgeDemonstrated ability to work on small development teams and contribute significantly. Candidates will be asked to provide references and to provide examples during interviews. Candidates with strong, consistent work histories will be given more consideration in the hiring process. Preferred Skills & Experience: Confluence/JiraGitlab and Gitlab pipelinesBlenderWiresharkNetworking Education: A Bachelor of Science (BS) degree from an accredited college or university in Computer Science or 7+ years of proven experience working with the required and desired languages and tools.Clearance: A Secret Clearance is required for this position. Applicants selected will be subject to a security investigation and may need to meet eligibility requirements for access to classified information. US Citizenship is required to obtain a clearance. Travel: None Benefits & Compensation: At SimVentions, we’re committed to supporting the total well-being of our employees and their families. Our benefit offerings include comprehensive health and welfare plans to serve a variety of needs. We offer: Medical, dental, vision, and prescription drug coverageEmployee Stock Ownership Plan (ESOP)Competitive 401(k) programsRetirement and Financial CounselorsHealth Savings and Health Reimbursement AccountsFlexible Spending AccountsLife insurance, short- & long-term disabilityContinuing Education AssistancePaid Time Off, Paid Holidays, Paid Leave (e.g., Maternity, Paternity, Jury Duty, Bereavement, Military)Third Party Employee Assistance Program that offers emotional and lifestyle well-being services, to include free counselingSupplemental Benefit Program Compensation at SimVentions is determined by a number of factors, including, but not limited to, the candidate’s experience, education, training, security clearance, work location, skills, knowledge, and competencies, as well as alignment with our corporate compensation plan and contract specific requirements. The projected annual compensation range for this position is $90,000 - $135,000 (USD). This estimate reflects the standard salary range for this position and is just one component of the total compensation package that SimVentions offers. Why Work for SimVentions SimVentions is about more than just being a place to work with other growth-orientated technically exceptional experts. It’s also a fun place to work. Our family-friendly atmosphere encourages our employee-owners to imagine, create, explore, discover, and do great things together. Support Our Warfighters SimVentions is a proud supporter of the U.S. military, and we take pride in our ability to provide relevant, game-changing solutions to our armed men and women around the world. Drive Customer Success We deliver innovative products and solutions that go beyond the expected. This means you can expect to work with a team that will allow you to grow, have a voice, and make an impact.Get Involved in Giving Back We believe that one of the best ways to be a well-rounded company is to have well-rounded employees, and one of the ways we encourage that is by providing a wide range of service opportunities for our team members to engage in throughout the year. Build Innovative Technology SimVentions takes pride in its innovative and cutting-edge technology, so you can be sure that whatever project you work on, you will be having a direct impact on our customer’s success. Work with Brilliant People At SimVentions, we don’t just hire the smartest people. We hire experienced, creative individuals who are passionate about what they do, and who benefit from the culture that we have created here. Create Meaningful Solutions We are trusted partners with our customers and are provided challenging and meaningful requirements to help them solve. Employees who join SimVentions will enjoy benefits like: Impact: work on projects that directly support the defense of our nation.Serve: work for a company that supports its surrounding communities.Employee Owned: work with the best and help build YOUR company.Dress code: business casual. We like to be comfortable while we work.Healthcare: one of the best packages in the industry.Culture: add to our culture of technical excellence and collaboration.Food: we have a lot of food around here.Family focus: work for a team that recognizes the importance of family time.Resources: excellent facilities, tools, and training opportunities to grow in your field.Open communication: work in an environment where your voice matters.Fitness/Well-being: opportunities to participate in company sports teams and workout groups.Professional development: employee-led interest groups for personal and professional development plus great training optionsWhat you bring to the table: contribute, grow, and thrive. Other Perks: Lots of employee appreciation events throughout the yearExcellent working facilities and tools to get your job doneRegular communication (“All-Hands”, “SimV Share”, “Imagineering Day”) to stay connected to SimV culture, stay abreast of what is happening in the company, and meet new faces while eating good foodSimVentions sports teams and workout groupsEmployee led interest groups for personal and professional developmentWhat you bring to the table FTACEqual Opportunity Employer/Protected Veterans/Individuals with DisabilitiesThe contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. 41 CFR 60-1.35(c)

Our team members are at the heart of everything we do. At Cencora, we are united in our responsibility to create healthier futures, and every person here is essential to us being able to deliver on that purpose. If you want to make a difference at the center of health, come join our innovative company and help us improve the lives of people and animals everywhere. Apply today!Job DetailsShift: Monday-Friday 8am-4:30pmUnder general supervision of the Systems Manager, responsible for supporting the effective use and functionality of the automated equipment within a fully automated Distribution Center. This role has the responsibility to diagnose and repair electrical and mechanical issues, along with testing, replacement or repair electrical systems including single phase or three phase electrical systems up to 600volts, AC or DC motors, power supplies, frequency drives, servo drives, transformers, motor starters, proximity sensors, encoders, photo eyes, programmable logic Controllers (PLC), HMI’s, PLC Inputs/Outputs. In this position, the associate is responsible for reading electrical schematics, wiring diagrams, PLC ladder and block logic, loading programs or configuring PLC’s, HMI, and scanners. This role will be required to complete testing of equipment and instrumentation system including electrical, pneumatic, hydraulic, refrigeration, and water treatment chemicals. In utilizing computer hardware and software, this position will be required to complete the installation and setup of hard drives, RAM, network cards, monitor cards, and motherboards, along with utilizing MS office (Excel, Word, IM), MHE software such as RSLogix, Sort Director, GSMi, IPoint, Flex Sort, etc.This position is categorized as compliance critical and, as such, requires and is assigned specific responsibility for ensuring continual and proper compliance with all division, corporate and regulatory requirements.Ensures effective preventative maintenance plans and schedules for all facility equipment and systems.Diagnoses Materials Handling Equipment and Automated Picking System-related error conditions occurring in the Distribution Center and repairs appropriately.Oversees any maintenance, modifications, and/or system upgrades of Materials Handling Equipment and Automated Picking System controls.Assesses the efficiency of materials handling equipment and automated picking systems and defines necessary modifications.Performs routine preventive maintenance tasks to ensure continued productivity with warehouse operations.Maintains CMMS/EAM system on repairs required and performed on equipment in the Distribution Center.Manages the inventory of spare parts.Must be willing to work extended hours, as needed, in order to meet productivity goals.Performs related duties as assigned.Education:Requires some technical vocational training, or equivalent combination of experience and education.Work Experience:Normally requires one (1) to two (2) years related and progressively responsible experience; strong electrical background preferred.Skills and Knowledge:Strong technical and operational knowledge of mechanical, electrical and electronic equipment and systems. Strong aptitude for repair and maintenance activities.Ability to read and interpret CAD layouts, illustrated parts breakdown (IPB) diagrams, and electrical circuitry diagrams and drawings.Ability to diagnose and repair electrical and mechanical issues. Issues may include the testing, replacement or repair electrical systems including three phase or single phase electrical systems up to 600volts, AC or DC motors, power supplies, frequency drives, servo drives, transformers, motor starters, proximity sensors, encoders, photo eyes, programmable logic controllers (PLC), HMI’s, PLC Inputs/Outputs.Ability to test equipment and instrumentation system including electrical, pneumatic, hydraulic, refrigeration, and water treatment chemicals.Knowledge of programmable logic controllers (PLCs) preferred. Ability to read electrical schematic, wiring diagrams, and PLC ladder and block logic. Ability to load programs or configure PLC’s, HMI, scannersWorking knowledge of computer systems and personal computers. Computer hardware experience including the installation and setup of hard drives, RAM, network cards, monitor cards, and motherboards.Computer software experience including MS office (Excel, Word, IM), MHE software such as RSLogix, Sort Director, GSMi, IPoint, Flex Sort, etc.Strong analytical skills; ability to resolve issues effectively and efficiently. Ability to identify facilities-related maintenance problems and implement standard courses of action to resolve problems within established project timeframes and administrative and technical requirements.Positions at this level are generally semi- skilled helpers in a particular trade area.Positions may perform more than one trade, but any trade performed should be at the semi- skilled Controls Tech I level.May require involvement of supervisor when dealing with non- routine issues to determine most appropriate course of action, but has the ability to identify and solve less complex controls related troubleshooting without the assistance of others.Ability to diagnose and repair electrical and mechanical issues. Issues may include the testing, replacement or repair electrical systems including single phase or three phase electrical systems up to 600volts, AC or DC motors, power supplies, frequency drives, servo drives, transformers, motor starters, proximity sensors, encoders, photo eyes, programmable logic Controllers (PLC), HMI’s, PLC Inputs/Outputs. Ability to read electrical schematic, wiring diagrams, and PLC ladder and block logic. Ability to load programs or configure PLC’s, HMI, scannersAbility to test equipment and instrumentation system including electrical, pneumatic, hydraulic, refrigeration, and water treatment chemicals.Computer hardware experience including the installation and setup of hard drives, RAM, network cards, monitor cards, and motherboards.Computer software experience including MS office (Excel, Word, IM), MHE software such as RSLogix, Sort Director, GSMi, IPoint, Flex Sort, etc.Ability to communicate effectively both orally and in writingStrong interpersonal skillsStrong organizational skills; attention to detailWhat Cencora offersWe provide compensation, benefits, and resources that enable a highly inclusive culture and support our team members’ ability to live with purpose every day. In addition to traditional offerings like medical, dental, and vision care, we also provide a comprehensive suite of benefits that focus on the physical, emotional, financial, and social aspects of wellness. This encompasses support for working families, which may include backup dependent care, adoption assistance, infertility coverage, family building support, behavioral health solutions, paid parental leave, and paid caregiver leave. To encourage your personal growth, we also offer a variety of training programs, professional development resources, and opportunities to participate in mentorship programs, employee resource groups, volunteer activities, and much more. For details, visit https://www.virtualfairhub.com/cencoraEqual Employment OpportunityCencora is committed to providing equal employment opportunity without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, age, disability, veteran status or membership in any other class protected by federal, state or local law.The company’s continued success depends on the full and effective utilization of qualified individuals. Therefore, harassment is prohibited and all matters related to recruiting, training, compensation, benefits, promotions and transfers comply with equal opportunity principles and are non-discriminatory.Cencora is committed to providing reasonable accommodations to individuals with disabilities during the employment process which are consistent with legal requirements. If you wish to request an accommodation while seeking employment, please call or email . We will make accommodation determinations on a request-by-request basis. Messages and emails regarding anything other than accommodations requests will not be returnedAffiliated CompaniesAffiliated Companies: AmerisourceBergen Drug Corporation

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Location: Fredericksburg & Dahlgren, Virginia, USATelework: HybridClearance: Interim Secret (US Citizenship Required)Experience: Mid-LevelNumber of Openings: 1Funding Status: FundedSalary Range: $85,000 - $130,000 (Please see below for more info on salary) Journeyman Model Based Systems Engineer SimVentions is a 100% employee-owned business and has consistently been voted one of Virginia's Best Places to Work. We are looking for an experienced Journeyman Model Based Systems Engineer to provide engineering support for the Tomahawk Weapons System program. You will serve as part of a team that creates Cameo models of the system, its software, and its components. The team consists of Government and contractor personnel. Meetings will periodically take place on Dahlgren Naval base and our Dahlgren office, but technical work will primarily occur in either our Fredericksburg or Dahlgren office (not on base). 1-2 days of telework per week is possible. Responsibilities: Learn the systemUtilize MBSE tools (primarily Cameo) to develop modelsPerform scripting to export model information into other formats (e.g., Word)Provide inputs at technical meetingsReview co-workers work and provide constructive feedbackLearn and provide suggestions on processes Requirements: Ability to obtain Secret Clearance (United States Citizenship)Modeling experience (e.g., Cameo, MagicDraw, CORE, or GENESYS)5 years of technical experienceWorking group or IPT experience Preferred Skills & Experience: Familiarity with white box and black box conceptsExperience routing an Information Support Plan (ISP)Scripting proficiencyExperience working with Navy weapons system requirementsFamiliarity with Agile development methods such as Kanban Education: A Bachelor of Science (BS) degree from an accredited college or university in an engineering, scientific, or technical discipline OR 4 years of experience in lieu of a degree Clearance: A Secret Clearance is required for this position. Applicants selected will be subject to a security investigation and may need to meet eligibility requirements for access to classified information. US Citizenship is required to obtain a clearance. Travel: None Benefits & Compensation: At SimVentions, we’re committed to supporting the total well-being of our employees and their families. Our benefit offerings include comprehensive health and welfare plans to serve a variety of needs. We offer: Medical, dental, vision, and prescription drug coverageEmployee Stock Ownership Plan (ESOP)Competitive 401(k) programsRetirement and Financial CounselorsHealth Savings and Health Reimbursement AccountsFlexible Spending AccountsLife insurance, short- & long-term disabilityContinuing Education AssistancePaid Time Off, Paid Holidays, Paid Leave (e.g., Maternity, Paternity, Jury Duty, Bereavement, Military)Third Party Employee Assistance Program that offers emotional and lifestyle well-being services, to include free counselingSupplemental Benefit Program Compensation at SimVentions is determined by a number of factors, including, but not limited to, the candidate’s experience, education, training, security clearance, work location, skills, knowledge, and competencies, as well as alignment with our corporate compensation plan and contract specific requirements. The projected annual compensation range for this position is $85,000 - $130,000 (USD). This estimate reflects the standard salary range for this position and is just one component of the total compensation package that SimVentions offers. Why Work for SimVentions SimVentions is about more than just being a place to work with other growth-orientated technically exceptional experts. It’s also a fun place to work. Our family-friendly atmosphere encourages our employee-owners to imagine, create, explore, discover, and do great things together. Support Our Warfighters SimVentions is a proud supporter of the U.S. military, and we take pride in our ability to provide relevant, game-changing solutions to our armed men and women around the world. Drive Customer Success We deliver innovative products and solutions that go beyond the expected. This means you can expect to work with a team that will allow you to grow, have a voice, and make an impact.Get Involved in Giving Back We believe that one of the best ways to be a well-rounded company is to have well-rounded employees, and one of the ways we encourage that is by providing a wide range of service opportunities for our team members to engage in throughout the year. Build Innovative Technology SimVentions takes pride in its innovative and cutting-edge technology, so you can be sure that whatever project you work on, you will be having a direct impact on our customer’s success. Work with Brilliant People At SimVentions, we don’t just hire the smartest people. We hire experienced, creative individuals who are passionate about what they do, and who benefit from the culture that we have created here. Create Meaningful Solutions We are trusted partners with our customers and are provided challenging and meaningful requirements to help them solve. Employees who join SimVentions will enjoy benefits like: Impact: work on projects that directly support the defense of our nation.Serve: work for a company that supports its surrounding communities.Employee Owned: work with the best and help build YOUR company.Dress code: business casual. We like to be comfortable while we work.Healthcare: one of the best packages in the industry.Culture: add to our culture of technical excellence and collaboration.Food: we have a lot of food around here.Family focus: work for a team that recognizes the importance of family time.Resources: excellent facilities, tools, and training opportunities to grow in your field.Open communication: work in an environment where your voice matters.Fitness/Well-being: opportunities to participate in company sports teams and workout groups.Professional development: employee-led interest groups for personal and professional development plus great training optionsWhat you bring to the table: contribute, grow, and thrive. Other Perks: Lots of employee appreciation events throughout the yearExcellent working facilities and tools to get your job doneRegular communication (“All-Hands”, “SimV Share”, “Imagineering Day”) to stay connected to SimV culture, stay abreast of what is happening in the company, and meet new faces while eating good foodSimVentions sports teams and workout groupsEmployee led interest groups for personal and professional developmentWhat you bring to the table FTACEqual Opportunity Employer/Protected Veterans/Individuals with DisabilitiesThe contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. 41 CFR 60-1.35(c)

Our team members are at the heart of everything we do. At Cencora, we are united in our responsibility to create healthier futures, and every person here is essential to us being able to deliver on that purpose. If you want to make a difference at the center of health, come join our innovative company and help us improve the lives of people and animals everywhere. Apply today!Job DetailsShift: Sunday-Thursday 4:30pm-1am or close (Sometimes there will be a 4pm start time)Under general supervision of the Systems Manager, responsible for supporting the effective use and functionality of the automated equipment within a fully automated Distribution Center, while mentoring technician associates. In this role, the associate must use technical knowledge and skills to diagnose electrical controls issues to a component level, which includes diagnosis of capacitors, inductors, diodes, LED, and transistors. Diagnosis will include pressure transducers, flow meters, photo voltaic sensors, bridge and full wave rectifiers. This position is responsible for programming basic changes to PLC Controllers including modifying timing, adding alarms and logic for additional inputs or outputs, properly wiring additional devices to PLC’s and other Controllers. An associate in this role will also troubleshoot communication issues with devices connected to the MHE network or other networks such as Profibus, work with device IP addressing, network switches, along with operation and diagnosis of all chill water plant systems including chillers, cooling towers, boilers, pumps, BAS, HVAC, and water treatment. Ensures effective preventative maintenance plans and schedules for all facility equipment and systems.Diagnoses Materials Handling Equipment and Automated Picking System-related error conditions occurring in the Distribution Center and repairs appropriately.Oversees any maintenance, modifications, and/or system upgrades of Materials Handling Equipment and Automated Picking System controls.Assesses the efficiency of materials handling equipment and automated picking systems and defines necessary modifications.Performs routine preventive maintenance tasks to ensure continued productivity with warehouse operations.Maintains CMMS/EAM system on repairs required and performed on equipment in the Distribution Center.Manages the inventory of spare parts.Must be willing to work extended hours, as needed, in order to meet productivity goals.Performs related duties as assigned.Requires some technical vocational training, or equivalent combination of experience and education. Normally requires at least two (2) years related and progressively responsible experience; strong electrical background preferred.1. Strong technical and operational knowledge of mechanical, electrical and electronic equipment and systems. Strong aptitude for repair and maintenance activities.2. Ability to read and interpret CAD layouts, illustrated parts breakdown (IPB) diagrams, and electrical circuitry diagrams and drawings.3. Ability to diagnose and repair electrical and mechanical issues. Issues may include the testing, replacement or repair electrical systems including three phase or single phase electrical systems up to 600volts, AC or DC motors, power supplies, frequency drives, servo drives, transformers, motor starters, proximity sensors, encoders, photo eyes, programmable logic controllers (PLC), HMI’s, PLC Inputs/Outputs.4. Ability to test equipment and instrumentation system including electrical, pneumatic, hydraulic, refrigeration, and water treatment chemicals.5. Knowledge of programmable logic controllers (PLCs) preferred. Ability to read electrical schematic, wiring diagrams, and PLC ladder and block logic. Ability to load programs or configure PLC’s, HMI, scanners6. Ability to program basic changes to PLC controllers including modifying timing, adding alarms and logic for additional inputs or outputs. Ability to properly wire additional devices to PLC’s and other controllers.7. Working knowledge of computer systems and personal computers. Computer hardware experience including the installation and setup of hard drives, RAM, network cards, monitor cards, and motherboards.8. Computer software experience including MS office (Excel, Word, IM), MHE software such as RSLogix, Sort Director, GSMi, IPoint, Flex Sort, etc.9. Technical knowledge and skills include the diagnosing of electrical control issues to a component level. Component level skillset includes the diagnosing of capacitors, inductors, diodes, LED, and transistors. Ability to diagnose pressure transducers, flow meters, photo voltaic sensors, bridge and full wave rectifiers.10. Positions at this level are generally fully functioning specialists in a PLC/Electrical control trade area.11. Ability to troubleshoot communication issues with devices connected to the MHE network or other networks such as PROFIBUS, BACNET, LONWORKS, PROFINET, CAN-BUS, ASI, Etc. Skills to include an understanding of device IP addressing, network switches, etc.12. Ability to operate and diagnose all chill water plant systems including chillers, cooling towers, boilers, pumps , BAS, HVAC, water treatment13. Strong analytical skills; ability to resolve issues effectively and efficiently. Ability to identify facilities-related maintenance problems and implement standard courses of action to resolve problems within established project timeframes and administrative and technical requirements.14. Technical knowledge and skills include the diagnosing of electrical Controls issues to a component level. Component level skillset includes the diagnosing of capacitors, inductors, diodes, LED, and transistors. Ability to diagnose pressure transducers, flow meters, photo voltaic sensors, bridge and full wave rectifiers.15. Ability to program basic changes to PLC Controllers including modifying timing, adding alarms and logic for additional inputs or outputs. Ability to properly wire additional devices to PLC’s and other Controllers.16. Ability to troubleshoot communication issues with devices connected to the MHE network or other networks such as Profibus. Skills to include an understanding of device IP addressing, network switches, etc.17. Ability to operate and diagnose all chill water plant systems including chillers, cooling towers, boilers, pumps , BAS, HVAC, water treatment18. Ability to mentor other technicians.19. Ability to communicate effectively both orally and in writing20. Strong interpersonal skills21. Strong organizational skills; attention to detailWhat Cencora offersWe provide compensation, benefits, and resources that enable a highly inclusive culture and support our team members’ ability to live with purpose every day. In addition to traditional offerings like medical, dental, and vision care, we also provide a comprehensive suite of benefits that focus on the physical, emotional, financial, and social aspects of wellness. This encompasses support for working families, which may include backup dependent care, adoption assistance, infertility coverage, family building support, behavioral health solutions, paid parental leave, and paid caregiver leave. To encourage your personal growth, we also offer a variety of training programs, professional development resources, and opportunities to participate in mentorship programs, employee resource groups, volunteer activities, and much more. For details, visit https://www.virtualfairhub.com/cencoraEqual Employment OpportunityCencora is committed to providing equal employment opportunity without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, age, disability, veteran status or membership in any other class protected by federal, state or local law.The company’s continued success depends on the full and effective utilization of qualified individuals. Therefore, harassment is prohibited and all matters related to recruiting, training, compensation, benefits, promotions and transfers comply with equal opportunity principles and are non-discriminatory.Cencora is committed to providing reasonable accommodations to individuals with disabilities during the employment process which are consistent with legal requirements. If you wish to request an accommodation while seeking employment, please call or email . We will make accommodation determinations on a request-by-request basis. Messages and emails regarding anything other than accommodations requests will not be returnedAffiliated CompaniesAffiliated Companies: AmerisourceBergen Drug Corporation

The CSC ServiceWorks Story: We’re the leading provider of commercial laundry services, consumer services technology, and air-vending and EV solutions throughout the United States and Canada.Our Best-in-Class team of 2,500 dedicated professionals’ benefit from work that’s steady (but never boring), time to enjoy what matters, appreciation and rewards in return for hard work and accountability, and support in growing a fulfilling career. Overview: Appliance Install DriverMonday - Friday 7:30am - 4:30pmService Area: Virginia, West Virginia, Eastern NCAs a CSC Appliance Install Driver your days will be active,delivering and installing laundry and/or air vending equipment to a variety of places in your assigned service area. You’ll have a constant change of scenery, engage with clients and consumers daily, and learn new technology in an environment that supports your success in both your career and life.Position Duties:Deliver and Installlaundry or air equipment to customer's homes and client locationsDeliver and Install ancillary technology (card readers, digital enhancements)Drive a box truck to deliver, pick up, or repair/replace washers, dryers and/or air machinesPrepare equipment for delivery (assemble required parts prior to loading on trucks)Instruct customers and/or clients how to operate equipment in a safe and effective mannerStaying physically active loading and unloading your company truck using a 2-wheeled hand cart for support, ease and safety. Benefits & Perks: Work Life Balance!75% Employer Contribution to Medical, Dental, and Vision insuranceHealth Savings Account with Employer ContributionYear-round Work & Paid TrainingCompany Paid Life, Short-term, and Long-term Disability Insurance401k with generous Company MatchPaid Time Off (PTO) & Holiday PayFlexible Spending & Health Savings AccountEmployee Discounts: Travel, Theme Parks, Home & Auto Insurance and more!Education Reimbursement ProgramPaid employee Referral program What we’re looking for: Position Requirements:CANDIDATES MUST LIVE IN OR Virginia , West Virginia, Eastern NCHigh School diploma or equivalentValid Driver's LicenseMust be 21 years of age or olderAbility to pass pre-employment screeningDOT Certification is a plus!1 year of job-related experience in the areas of delivery and installation (preferred) training is providedMechanical & Maintenance Experience/KnowledgeExperience driving box trucksAbility to lift up to 100lbs in a variety of environmental conditions (both weather and non-weather related)Knowledge with computers and smart phone technologyTroubleshootingRoute Driving Experience a plus!Customer ServiceVisit our Careers Website atwww.cscsw.comto learn more about our available opportunities and the benefits of working for CSC ServiceWorks.CSC ServiceWorks is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status.

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment