FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Experienced Diesel Mechanic Full-time Location: Waukesha, WI Compensation: Up to $83,000 annually based on experience Coach USA is currently hiring full-time experienced class A or class B diesel mechanics to work at our Waukesha, WI Location! Coach USA has a new and exciting career opportunity for an experienced class A or class B diesel mechanic at our Waukesha location. We are looking for an experienced mechanic to repair and inspect company equipment in a cost effective, safe, and timely manner.What We Offer: Competitive wage based upon experience and certifications.Full-time.Paid holidays, vacation and PTO.Full benefits package (medical, dental, vision, short term disability, life insurance, 401K).Tool and boot allowance.Uniform provided. Responsibilities: Perform basic, routine, and preventative maintenance bus repairs.Diagnose mechanical, electrical, and other breakdowns or failures.Repair or replace malfunctioning components, parts, and other mechanical or electrical equipment.Removal, installation, disassembly, and reconditioning of components of diesel engines.Interprets diagnostic test results accurately.Writes detailed inspection reports and repair plans.Collaborates with other diesel mechanics in all operational repairs.Demonstrate skills in advanced testing of all vehicle systems.Participate in maintenance training programs required for job and career development.Completes test drives to make sure all repaired vehicles run correctly and safely.Uses power, machine, and hand tools safely in a maintenance environment.Follow all safety rules and regulations in the performance of work assignments. Qualifications: Experienced Class A or B mechanic.High School Diploma or GED preferred.Be able to work in all types of weather conditions, including outdoors.Must pass a pre-employment drug screen, physical and criminal background check.Familiarity with safety management.Possess your own set of tools to perform maintenance tasks.Must have a valid Class B Commercial Driver’s License (CDL), or the ability to obtain one.Ability to work weekends and holidays.Basic computer skills.Ability to communicate effectively in English.Experience in the transportation industry.Experience in the Motor Coach Industry.Associate degree in diesel technology preferred.Computer diagnostic skills a plus, but training is provided. Coach USA, INC. would love to discuss your qualifications for this position. To learn more about your next big career change! APPLY NOW! Coach USA is an Equal Employment Opportunity employer. In compliance with Federal and State equal employment opportunity laws, qualified applicants are considered for all positions without regard to race, color, religion, national origin, sex (including gender identity, sexual orientation, and pregnancy), age, genetic information, disability, veteran status, or other protected class.©"lube", "mechanically inclined", "mechanic", "Mechanic apprentice", "diesel technician", "auto mechanic", technical", "entry level mechanic"©

JOB DESCRIPTIONPersons employed as a Facilities Maintenance Technician is expected to:Perform cleaning activities such as dusting, mopping, collecting trash, etc.Perform minor fixes such as repairing broken locks, filling gaps on walls etc.Maintain and inspect electrical circuitryInstall appliances and equipmentConduct maintenance tasks such as replacing light bulbsInspect and troubleshoot equipment and systems (e.g. ventilation)Check functionality of safety systems (e.g. fire alarm)Collaborate with workers and other professionals during renovationsReport to a facilities or maintenance manager for issuesInstall and/or repair heating and refrigeration units.Paint interior and exterior surfaces.Perform custodial duties as necessary.Assist in preparing job estimates as required.Follow safety policies and procedures.Unless the accommodation would impose an undue hardship on the operation of our business, we will endeavor to make a reasonable accommodation to the known limitations of a Team Member due to pregnancy, childbirth, and related medical conditions or of a qualified applicant with a disability. If reasonable accommodation is needed to perform essential job functions and/or to receive other benefits and privileges of employment, please contact RESPONSIBILITIESThe following are essential to the job, in addition to those listed above and on the chart in this description. Certain functions may be performed in varying weather and environmental conditions, such as precipitation, extreme temperatures, jet engine fumes, dust, and noise. The tasks are performed inside and outside near stationary and moving aircraft (including spinning propellers and engines).Frequently lift and/or move up to 75 pounds.Read, write and fluently speak and understand the English language.Read and comprehend instructions, short correspondence and memos.Write routine correspondence.Effectively present information on a one-on-one and small group situations to customers, clients and employees.Apply common sense understanding to carry out detailed but uninvolved written or oral instructions.Deal with problems involving a few concrete variables in standardized situations.Add, subtract, multiply and divide in all units of measure using whole numbers, common fractions and decimals.Basic knowledge of HVAC, plumbing and electrical systemsExperience using hand and electrical toolsAbility to read technical manuals and drawingsVery good communication and interpersonal skillsPhysical stamina and dexterityQUALIFICATIONSTo qualify for this position, applicants and those in the roles must have:High School diploma or GED plus one (1) year experience and/or equivalent combination of education and experience.Minimum of 18 years of ageAbility to pass background checks (criminal and motor vehicle), drug tests, receive and maintain issuance of an airport security badge, and be insurable by the company's insurance policies.Must be legally authorized to work in the country of employment.Prior facility maintenance experience preferred.Must possess a valid state driver’s license.Successful completion of an apprenticeship is preferred.Pay ranges vary based on multiple factors including, without limitation, skill sets, education, shift worked, responsibilities, seniority, geographical market, merit, output, productivity, prior training or experience, travel. The pay range for this position is $18.00 to $21.67 / hour.ABOUT USSignature Aviation is the world's largest Fixed Base Operators (FBO) network, with over 200 locations and 5,000 employees globally. This worldwide FBO network is home to essential business and private aviation support services, including refueling, hangarage, maintenance, repair and overhaul, and other world-class amenities with exceptional customer service. We are renowned for delivering an exceptional guest experience and seek like-minded team members to ensure that every interaction reflects our commitment to excellence and hospitality.From your health to your financial wellness, there are several benefits for you and your family when joining Signature Aviation.Our Benefits:Medical/prescription drug, dental, and vision InsuranceHealth Savings AccountFlexible Spending AccountsLife InsuranceDisability Insurance401(k)Critical Illness, Hospital Indemnity and Accident InsuranceIdentity Theft and Legal ServicesPaid time offPaid Maternity LeaveTuition reimbursementTraining and DevelopmentEmployee Assistance Program (EAP) & Perks Qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, or other protected characteristics.

Req ID:455851Address: 9650 S. 20th St. Oak Creek, WI, 53154Benefits: * Fuel Your Growth with Love's - company funded tuition assistance program* Paid Time Off * Flexible Scheduling * 401(k) – 100% match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Hiring Immediately Welcome to Love’s!Diesel Technicians work in a fast-paced environment and maintain clean places with friendly faces. You will interact with customers & drivers from all over, making their travels and their day better. Job Functions: Troubleshoot and repair light mechanical issues that may include wheel-end assemblies, electrical systems, suspensions, A/C, or engine componentsAssist customers with roadside servicesProvide preventative maintenance servicesAbility to move, lift 75+ pounds working in close quarters. Ability to work in various temperatures.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Work a rotating schedule that alternates between day and night as needed.Ability to obtain a medical card through the Department of Transportation. (paid by Love’s) Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer. Veterans encouraged to apply.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

Clean Harbors in Germantown, WI is seeking a Class A CDL Driver (Equipment Operator) to operate a variety of heavy and light duty trucks/work equipment at our customer sites; some of the vehicles operated include vacuum trucks, Cuscos, guzzlers, and roll offs. This role is responsible for performing driving and non-driving duties on and off customer sites associated with hazardous waste clean-up. Up to 10% overnight travel, hotel and per diem providedHazmat and Tanker endorsements required, no auto restrictionMonday through Friday schedule, average start time 6 amTypically, a 40–60-hour work week, overtime after 40 hrs.On call as needed Clean Harborsis the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Why work for Clean Harbors Health and Safety is our #1 priority and we live it 3-6-5!Focus on maintaining sustainability and cleaning the EarthPay range $26-28 per hourComprehensive health benefits coverage after 30 days of full-time employment including 401K with Company matchOwn part of the company with our Employee Stock Purchase PlanOpportunities for growth and development for all the stages of your careerCompany paid training and tuition reimbursementEnsure Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and always acting in a safe mannerOperate commercial trucks and assist field laborers when needed (team atmosphere where everyone helps)Operate a variety of Class A trucksLoading and unloading of trucksManual labor on site to ensure fulfillment of customer needsProper placarding of vehicles to meet Company and DOT requirements/regulationsMaintain daily logs, time sheets, and various reportsFollow all local, state (provincial) and federal compliance regulations and rulesSafely operate vehicles in accordance with U.S. DOT, local, state (provincial) and federal requirementsSafely observe all corporate operating guidelines and proceduresObserve all company environmental health and safety operating guidelinesPerforms other duties as assignedBy position, ability to be on call for emergency response on rotating basis every other weekBy position, site-remediation, equipment decontamination, and the handling of hazardous materialsValid Class A CDLHazmat and Tanker endorsement required, no auto restrictionAbility to use various mobile devicesPerform physical functions per job requirementsSuccessfully complete a background check, drug test, and physical, by positionPer OSHA's Respiratory Protection Standard, 29 CFR 1910.34, employees in positions requiring respirators are required to meet facial hair standards. Preferred Qualifications: Commercial driver experiencePrevious Hazmat experienceAbility to operate a manual transmissionPrevious manual labor experienceClean Harbors is an equal opportunity employer.Clean Harbors is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact or 1-.Clean Harbors is a Military & Veteran friendly company.*CH

Essential Duties and Responsibilities: Respond to emergency situations in a professional and efficient manner with a teamwork approach.Solve and handle Guest concerns with a positive attitude and efficient customer service.Interact with Guests on a one-on-one basis or in large groups and maintain professionalism.Communicate and enforce all rider requirements and restrictions. (i.e. height and/or weight restrictions, proper swimwear, proper riding position, etc.)Responsible for the proper and safe operation of rides/attractions in the water park.Deliver friendly and informative announcements to Guests in small and large groups.Maintain a clean work area to promote a safe working environment and help eliminate hazards.Assist with maintaining park cleanliness throughout the day and end-of-day cleaning tasks.Complete attraction certification tests, corrected to 100% proficiency.Complete Witness Statements and/or other required documentation accurately and legibly as needed.Maintain proper grooming and uniform guidelines at all times.Follow and enforce all park policies and procedures in a fair and consistent manner at all times.Maintain all job duties in all weather conditions including, but not limited to heat, cold, sun, rain, and wind.Perform Water Attendant duties and responsibilities as needed. Skills and Qualifications: Minimum Age: 15Must be able to achieve, and maintain, certification as a Shallow Water Lifeguard.Responsible for maintaining all rescue skills at a “test-ready” level.Must be able to swim a minimum of 50 yards non-stop.Must be able to retrieve a 10lb. brick from a minimum of 5 feet of waterMust be able to swim across 10 feet under water.Must be able to exit out of a pool without using a ladder.Must complete a minimum of 4 hours of in-service training per month.Must be able to work varied shifts including days, nights, weekends, and holidays.Must be able to communicate effectively in the English language, including the ability to read, speak, and understand.Must be able to stand in and move through water for periods of time at water depths from 0 to 6 feet.Must be able to stand and walk a minimum of 7 to 10 hours a day over various surfaces.Must be able to continuously kneel, use hand-eye coordination, maintain a minimum of 20/25 vision or have 20/25 corrected vision.Must be able to continuously pull, push, and hold tubes, rafts, and mats.Must be able to lift and carry a minimum of 50lbs. for a minimum of 25 feet over various surfaces.Must have excellent communication skills to interact effectively with guests, co-workers, and leadership.Must be able to work efficiently in a fast-paced environment.Must be willing to work outdoors in various weather conditionsMust be professional, self-motivated, the ability to multi-task and have an enthusiastic attitudeMust have strong teamwork skills and the ability to work with others Other Functions: All other duties assigned or necessary to support the park as a whole. Perks: FREE admission to our park and other Six Flags Parks!FREE tickets for family and friends!Discounted Season PassesDiscounts on Food and MerchandiseEnjoy Team Member Exclusive Events

$18.00 - $24.00/hourSalary is determined by the applicant’s experience, knowledge, skills, and abilities, as well as internal equity and alignment with market data.Immediately hiring! We’re looking for responsible, detailed people who are ready to accelerate their automotive repair career! Whether you have worked in an auto garage or car dealership, this job is for you! Join our team of driven professionals at Avis Budget Group enterprise.What You’ll Do:As an automotive technician, you will be responsible for conducting essential repairs on a diverse range of vehicle brands and models, requiring minimal technical oversight. Your tasks will encompass various maintenance activities such as oil changes, lubrication, tire repairs, and potentially warranty repairs based on your proficiency level. In addition, you may support our skilled mechanics in handling intricate repair procedures.Perks You’ll Get:Bi-weekly hourly wage (New York and Puerto Rico: weekly wage)On-the-job training to expand your automotive abilities and help to obtain ASE CertificatesPaid time offMedical, dental and other insuranceFlexible spending account opportunity to contribute up to $270 as a tax-free benefit for public transportation or parking expensesRetirement benefits (401k)Employee discounts, including discounted car rental and discounted prices on the purchase of Avis/Budget cars* Above perks may vary based on full-time/part-time status and locationWhat We’re Looking For:Valid Driver’s License and good driving recordAt least 2 years of auto repair experience or coursework with automotive certifications1 ASE certification (ability to acquire 2 additional ASE certifications within first year)Knowledgeable in areas covered by the ASE certification programs, including, but not limited to, Engine Repair, Drive Train/Axles, Suspension/Steering, Brakes, Electrical, Heating/Air Conditioning, Engine Performance and Light Vehicle/DieselComfortable working in a mechanical shop with moderate or loud noise levelsMust have a complete set of tools required for auto repair and maintenanceBasic computer skills including typing, data entryMust be able to lift up to 50 pounds, continuously stand, bend, reach, walk, sit and kneel frequently, enter, exit and drive vehiclesMust be 18 years of age and legally authorized to work in the United StatesThis position requires regular, on-site presence and cannot be performed remotelyPrevious Original Equipment Manufacturer (OEM) experience preferred, providing an added advantage! Who We Are Here at Avis Budget Group, you will be joining a team of 25,000 driven people, performing with purpose. Together, we’re moving the future of transportation forward with our innovative, customer-focused solutions.Our culture is performance driven, where we encourage and support each other to be at our best through leadership, training, tools, and rewards.We are proud to make a positive difference to the lives of our colleagues, customers, and communities where we operate.Avis Budget Group is an Equal Opportunity Employer – Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other category protected by applicable law. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. The compensation and benefits information is accurate as of the date of this posting.The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. This position may be with any affiliate of Avis Budget Group. West AllisWisconsinUnited States of America

Looking for a Handyman with Heart – Who Loves to Learn and Solve What you will be doing: We are currently looking for a hard-working and customer service minded individual with prior apartment maintenance experience to fulfill the need of a Maintenance Technician at our properties. As a Maintenance Technician at Morgan Properties, you will: Be responsible for trouble-shooting service issues including, but not limited to, HVAC, general appliance, carpentry, electrical and plumbing.Ensure that both the inside and the exterior of the property meet both company standards and applicable laws. Respond to maintenance tickets.Follow-up with residents and the office staff on status of workWork in an on-call rotation that will require night and weekend flexibility. What we’ll expect from you: Active and valid driver’s license and a personal vehicle.Live within a 30-minute commute of the properties.HVAC/EPA/CFC Certification preferred.High school diploma or GED, one-year related experience, or equivalent education and experience. Benefits of Employment: Pay Range: $20.00 - $24.00Up to 50% Rent Discount Property Staff Shared Renewal Commissions – paid monthly$300 Morgan Essentials – paid quarterlyOn-call Appreciation, $15/day for holding the on-call phoneEmployee referral payment program (up to $750)Education/Tuition Reimbursement ProgramMedical, Dental, and Vision benefitsLife/AD&D InsuranceLong- and short-term disabilityRetirement Plan - 401(k) Plan with company matchGenerous paid time off, including 10 holidays per year and sick leaveEmployee Assistance ProgramAdditional employee discounts available! #AC4548Get To Know Us:Established in 1985 by Mitchell Morgan, Morgan Properties is a national real estate investment and management company headquartered in Conshohocken, Pennsylvania. Jonathan and Jason Morgan represent the next-generation leaders growing the platform and overseeing the business operations.Morgan Properties and its affiliates currently own and manage a multifamily portfolio comprised of more than 350 apartment communities and over 95,000 units located in 20 states. The Company is among the three largest multifamily owners in the nation and the largest in Pennsylvania, Maryland, and New York. With over 2,500 employees, Morgan Properties prides itself on its quick decision-making capabilities, strong capital relationships, and proven operational expertise.

Build your best future with the Johnson Controls teamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What we offer:Competitive salaryand bonus planPaid vacation/holidays/sick timeComprehensive benefits package including 401K, medical, dental, and vision careOn the job/cross training opportunitiesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyWhat you will do:Under broad direction from the Vice President, Assistant General Counsel, the Legal Director will act as counsel to the teams responsible for product development, product management and indirect sales of our commercial HVAC/R product businesses including Equipment North America and Data Centers. In addition, the Legal Director will act as the lead lawyer for one or more of the Global Products business units working in close collaboration with the other members of the Global Products legal team as well as the functional legal experts and the field legal team.How you will do it:Using a deep understanding of the business and its strategic imperatives, develop and execute the legal strategies and tactics that drive the achievement of the business objectives, either individually or in partnership with other internal and external legal team members.Become familiar with the laws, regulations and regulatory developments associated with the HVACR industry.Have a broad background that enables you to be the subject matter expert and lead legal support on matters of addressing channel/distribution sales, commercial transactions, and other matters of strategic importance, as well as providing general business, manufacturing, and anti-competition advice.Negotiate complex product customer agreements with a focus on new and developing technology and contracting services enabled by digital connectivity.Proactively identify and mitigate risks to the business, with a focus on ensuring Johnson Controls ability to continue to develop and enhance its Global Product offerings through new product development.Provide guidance to businesses to successfully launch compliant products and services.Train and guide clients in complex issues typical for innovative, growth-oriented, multinational manufacturing and technology companies.Counsel the business and manage disputes.Work collaboratively with GP legal team, contract managers and other professionals assuring delivery of cost efficient and effective legal services.Work directly with lead business partners, corporate center of excellence, regional legal teams, and outside counsel to ensure cost-effective support of commercial transactions, litigation, and other matters of strategic importance to the business.Identify and sponsor enterprise-wide initiatives that advance the company’s legal function.Domestic and international travel may be required.What we look for:The successful candidate will be a forward-looking lawyer, with a deep understanding of the product businesses they support. You must have demonstrated capability for innovative thinking, working independently and proactively, and challenging the status quo. You must have the credibility to function as a trusted advisor to the business leaders they support. In addition, the candidate must display an unquenchable curiosity and be able to make connections and draw conclusions from incomplete information.For this position, the qualified candidate will have a demonstrated interest in complex commercial negotiations, products (hardware and software), and helping businesses be successful in achieving their business plans.RequiredMust have a J.D. from ABA-accredited law school and licensed to practice law within the United StatesMinimum of 8 years of relevant law firm and in-house experience.Disciplined legal drafter/writer and possess a problem-solving, “can-do” orientation with a demonstrated ability to simplify complex situations.Experience with M&A transactions.Ability to influence without authority and to work within a matrixed legal team.Ability to develop and sustain relationships with management at all levels across geographies and customer management skills.PreferredExperience with with industrial building products and equipment support.Experience with HVACR product support, channel and distribution sales, antitrust, pricing, and contracting complex commercial mattersFamiliarity with product labeling and regulatory HVACR requirements (e.g., low GWP refrigerants, construction contracts).Experience selecting/managing outside counsel on an international basis.This job description indicates the general nature and level of work expected of the incumbent. It is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities required of the incumbent. Incumbent may be required to perform other related duties.This is a hybrid role based at our Glendale, WI office. Must be in office -3 days per week.#LI-Hybrid

Looking for a place where you can thrive SavATree's mission is to take our passion for nature and keep this country's outdoors beautiful and flourishing. Through our comprehensive tree, shrub, and lawn care we work hard to make sure our discerning customers have attractive, healthy and cared-for green spaces to enjoy. Over the last thirty years, we have opened new offices across the country, and we are looking for people who want to grow with us. The General Tree Care Team are the muscle of our operation. These industrial athletes work together to provide high-quality tree care, helping to maintain and preserve the overall health of our clients' landscapes. In this role, team members have the opportunity to work outside and visit beautiful properties in their community. The Tree Care team applies expertise in climbing, pruning, and safety to ensure the health and well-being of each client's landscape. This position pays up to $35 an hr depending on experience + paid PTO + paid benefits, 401K! What a day is like: Daily focus is working together on a General Tree Care crew to provide high quality tree care to our clients. The Tree Care Team is involved in all aspects of pruning, removals, cable bracing and other concepts related to tree care. Team members are able to safely operate all equipment and perform the assigned job tasks while also providing excellent service to our clients. What kind of person are we looking for Someone with: Experience with proper pruning practices including large shade trees and ornamentalsAbility to identify native and introduced tree and shrub species and have a working knowledge of each species' characteristicsAbility to climb without spursExperience with tree care safety standardsPractical knowledge of chainsaw and equipment operationExperience with aerial lifts (bucket truck)Communicate advanced understanding of all safety policies and procedures, including hazard tree identification.Utilize specialized equipment properly for climbing (ropes, saddle, ladders) along with all associated tools.Apply knowledge of branch collars, and proper pruning cuts with total competence on chainsaw operations.Employ ANSI A300 Pruning Standards and Terminology and ANSI Z Safety What is Essential: 2 5 years of tree care/tree climbing experienceLeadership experience in directing and guiding a tree care team on daily routines and activitiesThe desire to work outdoors Valid U.S. driver's license to operate company vehicles, CDL A&B a plus or willingness to obtainMust be authorized to work lawfully in the U.S. Why you might love working here: We have lots of training and development opportunities and support continuing education in the industryOur Tree Care Team works alongside some of the best trained and equipped teams in the industry, with an emphasis on quality and safetyWe offer competitive compensation and benefits, including health and dental, paid time off, 401(K) Savings Plan, Flexible Spending Plan, Equipment Account Physical demands of this role: These physical demands described must be met by an employee to successfully perform the essential functions of this job. While performing the duties of the job, the employee is subject to lift and/or move up to fifty (50) pounds. We want everyone to be able to identify and achieve their own version of success, which means giving each team member the room and opportunity to grow. To ensure that everyone has the best chance to succeed, we invest heavily in training and continuing education. We make it easy for team members to reach out and get the help needed, even when it's from the other side of the country. We pride ourselves on creating an environment where each team member has the resources and opportunities to advance his or her career and become a go-to subject matter expert. That's why we often say that when you work here, you thrive here. SavATree is an equal opportunity employer and a Drug Free Workplace

This position is an essential part of Sherwin’s manufacturing team. This position is responsible for installing, troubleshooting, repairing, and maintaining production and facility equipment to support production requirements and goals. Equipment may include: dryers, chillers, thermal oxidizer, HVAC, fire pump, mixers, mills, filling line equipment, conveyors, wrappers, tanks, motors, pumps, tank washers, tank tipper, as well as dock and building maintenance, etc. This position performs various maintenance tasks as assigned and is responsible for maintaining a safe, clean, and productive working environment. Additional Information12 Hour rotating schedule: 6:00AM - 6:30PM 36 // 48This position is also eligible for bonus based on performance and subject to the terms of the Company’s applicable plans.This position is eligible for health benefits, such as medical, dental and vision coverage, Flexible Spending Accounts (FSAs), disability coverage, security, retirement and saving benefits, and more. Additional benefits include a generous time away from work package, including personal leave, paid parental leave, medical leave, vacation, holidays, among other benefits. For more information about our benefits, visit http://www.myswbenefits.com/.Job duties include contact with other employees, operating heavy machinery, and access to proprietary information, raw materials, finished merchandise, and/or other items of value, and such access may be supervised or unsupervised. The Company therefore has determined that a review of criminal history is necessary to protect the business and its operations and reputation and is necessary to protect the safety of the Company’s staff, employees, and vendors. Here, we believe there’s not one path to success, we believe in careers that grow with you. Whoever you are or wherever you come from in the world, there’s a place for you at Sherwin-Williams. We provide you with the opportunity to explore your curiosity and drive us forward. Sherwin-Williams values the unique talents and abilities from all backgrounds and characteristics. All qualified individuals are encouraged to apply, including individuals with disabilities and Protected Veterans. We’ll give you the space to share your strengths and we want you show us what you can do. You can innovate, grow and discover in a place where you can thrive and Let Your Colors Show! At Sherwin-Williams, part of our mission is to help our employees and their families live healthier, save smarter and feel better. This starts with a wide range of world-class benefits designed for you. From retirement to health care, from total well-being to your daily commuteit matters to us. A general description of benefits offered can be found at http://www.myswbenefits.com/. Click on “Candidates” to view benefit offerings that you may be eligible for if you are hired as a Sherwin-Williams employee. Compensation decisions are dependent on the facts and circumstances of each position, which will impact where actual compensation may fall within the stated wage range. The wage range listed for this role takes into account the wide range of non-discriminatory factors considered in making compensation decisions including geographic location; skill sets; experience and training; licensure and certifications; and other business and organizational needs. The wage range, other compensation, and benefits information listed is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. Qualified applicants with arrest or conviction records will be considered for employment in accordance with applicable federal, state, and local laws including with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act where applicable. Sherwin-Williams is proud to be an Equal Employment Opportunity/Affirmative Action employer committed to an inclusive and diverse workplace. All qualified candidates will receive consideration for employment and will not be discriminated against based on race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, marital status or any other consideration prohibited by law or by contract. As a VEVRAA Federal Contractor, Sherwin-Williams requests state and local employment services delivery systems to provide priority referral of Protected Veterans. Please be aware, Sherwin-Williams recruiting team members will never request a candidate to provide a payment, ask for financial information, or sensitive personal information like national identification numbers, date of birth, or bank account numbers during the application process. Perform preventive maintenance inspections and service on equipmentRepair broken machines and equipment quickly and efficientlyIdentify causes of unexpected breakdowns of machinesRecord and report damaged, worn, or broken partsOrder and install replacement parts for machinesAssist in electrical projects and perform minor electrical repairsAssist in pipe fitting tasks and perform some installation unassistedMaintain and service building equipment including HVAC, lighting, water and sewer, etc.Maintain documentation as requiredClean, organize, inventory, stock, and otherwise maintain shop areas, parts, tools, and suppliesCoordinate with managers to schedule regular maintenance on machinesMaintain technical knowledge through trainingMinimum Requirements: Must be at least eighteen (18) years of ageMust be legally authorized to work in the country of employment without needing sponsorship for employment work visa status now or in the futureMust have at least one (1) year of work experience as a mechanic in a manufacturing and/or distribution environment Preferred Qualifications Have at least two (2) years of work experience as a mechanic in a manufacturing and/or distribution environmentHave an industrial, electrical, and/or welding certification or licenseHave at least one (1) year of maintenance experience applying electrical, hydraulic, and pneumatic conceptsHave at least one (1) year of work experience implementing Programmable Logic Controls ("PLC")

Charter Manufacturing is a fourth-generation family-owned business where our will to grow drives us to do it better. Join the team and become part of our family!***$5000 Hiring Bonus***At Charter Dura-Bar, our Maintenance team is the backbone of our operations, keeping everything running smoothly. They tackle a variety of challenges, from installing and maintaining equipment to troubleshooting complex problems and executing preventive maintenance plans. Join our Skilled Trades Team and elevate your talents.POSITION PURPOSE/MISSION:In the electrical maintenance role you will Install, maintain, troubleshoot, and repair all electrical systems of the plant in accordance with codes, regulations, and specifications, ensuring minimum down time of the plant operations, in accordance with company policies and procedures. Support maximizing facility uptime through execution of rolling equipment setups.PHYSICAL REQUIREMENTS:Constant standing.Frequent lifting up to 10 lbs.Occasional carrying, lifting to 60 lbs, hand use, pushing/pulling, reaching, sitting, below waist level work, complex neck/spinal motion, and walking.Minimal climbing, foot use, and lifting up to 120 lbs.Ability to meet the physical requirements, with or without reasonable accommodation, as provided in detail in the Job Analysis DatabaseMINIMUM QUALIFICATIONS:High School Diploma or GED.Accredited maintenance apprenticeship or two years technical training with two plus years’ industrial electrician experience.Five plus years’ industrial electrician experience or equivalent combination of education and experienceDemonstrated ability toread and interpret documents such as wiring diagrams, schematic drawings, instructions, safety rules, code books, and specifications.Demonstrated ability to inspect electrical systems, equipment, and machines for possible problems.Knowledge of medium voltage power distribution systems.Knowledge of drives, controls, motion controllers, PLCs, and/or motors.Understanding of national electric code (NEC) and NFPA-70E.Ability to operate mobile equipment such as forklifts, overhead traveling cranes, and aerial lift platforms in a safe and professional manner.Ability to use math skills including fractions, percentages, geometry, and probability. Ability to read and understand technical proceduresGood verbal and written communication skills.Ability to follow and give instructions.Ability to work well with other employees.Proficient in basic computer skills.Knowledge of lockout/tagout procedures.PREFERRED QUALIFICATIONS:Knowledge of silicon-controlled rectifiers (SCR), rectifiers, capacitors, and resistors.Advanced knowledge of PLC programming (Allen Bradley, Siemen, GE, etc.)Advanced knowledge of operation of SCRs, rectifiers, capacitors, and resistors.Advanced knowledge of process identifier (PID) troubleshooting experience.Machine tool, forklift truck, and crane experience.Advanced knowledge and aptitude on hydraulic, pneumatic, combustion, machining, and mechanical systems.Troubleshooting experience with automated systems (material handling, machine tools, and metal casting equipment)Work experience in a foundry environment.MAJOR ACCOUNTABILITIES:Perform advanced problem solving by identifying, troubleshooting, and correcting electrical issues.Perform a wide variety of installation, maintenance, and troubleshooting work to keep production and support equipment in operating condition.Act as subject matter expert for electrical systems. Analyze test results, machine error messages, and information obtained from operators to diagnose and repair.May perform ARC flash program.Layout control panels using schematics and I/O mapping.Perform a wide variety of electrical installation, maintenance, and troubleshooting work to keep production and support equipment in operating conditions.Plan, layout, and install complex wiring circuits and distribution centers in conformance with established electrical codes; plan, measure, bend, and fir conduit.Install and troubleshoot motor control centers, power distribution panels, lighting panels, and controls on plant equipment such as bar pulling machines, cut off equipment, centerless grinders, trepanning lathes, dust collectors, melting and holding furnaces, and other similar types of equipment.Repair, replace, and connect single or three-phase motors AC or DC, on all types of production and support equipment.Maintain and replace starter, contactors, relays, timers, limit switches, and counters.Use material handling equipment when performing certain electrical maintenance work; operate a forklift truck for transporting equipment and lifting employees; use specialized power equipment for pulling cable and wire.Use multimeters and other test instruments when troubleshooting electrical circuits; interpret resistance, voltage and amperage readings to arrive at the solution to electrical problems; use instrumentation built into equipment to diagnose certain malfunctions.Proceed independently when installing or troubleshooting electrical equipment; obtain needed information form wiring diagrams, schematic drawings, and code books.Follow all plant safety rules; including lock out of all plant equipment so that it is safe to work on; use safety equipment appropriate for the job; be aware of the safety of others.Follow Environmental, Quality and Safety Management System procedures and requirements.Ability to meet the essential job requirements, with or without reasonable accommodation, as outlined in the job description.#LI-Onsite#LI-ME1The entry hourly rate for this position is $35.25 per hour. The actual base pay offered to the successful candidate will depend on various factors, including but not limited to job-related skills, experience, and qualifications. Compensation decisions are tailored to the unique circumstances of each position and candidate.We offer comprehensive health, dental, and vision benefits, along with a 401(k) plan that includes employer matching and profit sharing. Additionally, we offer company-paid life insurance, disability coverage, and paid time off (PTO).

We want you to help us shape the future of shopping experiences and deliver on our purpose of connecting people with the products and experiences that enrich their lives. Joining Retail Odyssey, an Advantage Solutions company, means joining a network of 65,000 teammates serving 4,000+ brands and retail customers across 40+ countries. All the while, being provided the opportunities, support, and enrichment you need to grow your career.In this role, you will provide in-store merchandising support to Retailers to meet shoppers’ needs. This includes building displays and end caps, resetting shelves with product rotation, and tracking inventory to ensure that stores and suppliers maximize sales opportunities. Are you ready to shape the future of shopping and get it done with us What we offer:Competitive wages; $16.00 per hourGrowth opportunities abound – We promote from withinNo prior experience is required as we provide training and team support to help you succeedAdditional hours may be available upon requestWe offer benefits that can be customized to meet your family’s needs, including medical, dental, vision, life insurance, supplemental voluntary plans, wellness programs, and access to discounts through Associate PerksNow, about you:Are comfortable interacting with customers and management in a friendly, enthusiastic, and outgoing mannerYou’re 18 years or olderCan perform physical work of moving, bending, standing and can lift up to 50 lbs.Have reliable transportation to and from work locationDemonstrate excellent customer service and interpersonal skills with our clients, customers and team membersAre a motivated self-starter with a strong bias for action and resultsWork independently, but also possess successful team building skillsHave the ability to perform job duties with a safety-first mentality in a retail environmentIf this sounds like you, we can’t wait to learn more about you. Apply Now!

Schedule: 12 hours day shift 7am to 7pm - Week 1 schedule is 3 days worked, 4 days off. Week 2 schedule is 4 days worked, 3 days off. Responsibilities: Daily bending, lifting, stooping, squatting, reaching, pushing and pulling activity to work on and around equipment.Evaluate equipment issues to trace back for repairing/replacing sensors, contacts, or other defective parts.Working with PLC equipment, multiple small tools, and high-voltage equipment.Follow, without exception, all work instructions and safety policies, including use of all PPE and safety equipmentExamine machine controls to install plate changeovers and start up machines for production needs when requiredPerform routine preventive maintenance checks on all production equipment and machineryRepair basic mechanical components and replace parts on machines such as bearings, filters, wiring, valves, gauges and switchesObserve and listen to mechanical devices in operation to locate causes of problemDismantle devices to gain access to and remove defective partsAdjust functional parts of devices and control instrumentsInspect used parts to determine changes in dimensional requirementsLubricate and clean machinery and support equipment to maintain housekeeping and preventive maintenance standards within the plantDocument and track changeover times and recordAccomplish all work orders to maintain safety; reduce downtime; decrease scrap; improve quality production; and improve plant efficiencyFollows all safety rules and procedures including Lockout/Tagout program, housekeeping, and 5S standards and observes the operations to insure a safe work environmentPerform other related duties as assigned Requirements: High School Diploma or GED3-5 years’ experience in a maintenance of Can Assembly Presses within a manufacturing environment; or equivalent combination of training and experienceAbility to maintain, troubleshoot and repair electrical equipment, mechanical systems, pneumatic, and hydraulics.Knowledge of PLC Logic.Understand electrical panel and drive components.Understand gear trains, shafts/journals, pulleys, and bearings.Maintenance and repair of waxers, scroll shears and Cone Top presses.Ability to interpret documents such as procedure manuals, blueprints, schematics, charts, diagrams, etc.Ability to use precision measuring devices including amp meters, electric meters, and hydraulic gaugesBasic understanding of systems, equipment and schematicsAbility to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Good troubleshooting skillsBasic mathematical skills used to add, subtract, multiply, divide, and use decimals and fractionsAbility to perform work in a mature and professional manner, demonstrate personal responsibility, and perform all assigned duties Physical Requirements: Plant facility runs 24 hours a day, 7 days a week consistently, excluding designated holidays or prearranged shut down.Ability to be on feet consistently 8 hours up to a 12 hours per scheduled shiftWalking during this standing time throughout the plant to get to the different production lines.Climbing up and down ladders to get to the different work areas to work on the production lines, silos, molds. Reaching above shoulders, hand and wrist repetitive simple grasping to pick up tools to use during maintenance repair tasks.Shifts can be scheduled 5 days consecutive Monday to Friday or alternating 2-week rotation any of the production working days.Use of hands and fingers to perform job functionAbility to stoop, kneel, bend and climb, as needed to work in or around the machines being repaired. Ability to lift as needed up to 55lbs during scheduled shiftThe work environment is inside, however not temperature controlled. Exposed to both heat and cold depending on the daily weather conditions outside, and plastic mold machine station working at.The ability to wear required PPE from safety glasses, hearing protection, hard hat (when require), cut resistant gloves, steel/composite toed safety shoes, and when necessary ARC Flash clothing. Benefits: Comprehensive health insurance, paid time off, and 401(k) with company match. Pay: Compensation base starts at $26.10 to $31.58 depending on experience.Do you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Starting Hourly Rate $23.00 USD per hourPay is based on several factors which vary based on position. These include labor markets and in some instances may include education, work experience and certifications. In addition to your pay, Target cares about and invests in you as a team member, so that you can take care of yourself and your family. Target offers eligible team members and their dependents comprehensive health benefits and programs, which may include medical, vision, dental, life insurance and more, to help you and your family take care of your whole selves. Other benefits for eligible team members include 401(k), employee discount, short term disability, long term disability, paid sick leave, paid national holidays, and paid vacation. Find competitive benefits from financial and education to well-being and beyond at .About us:Working at Target means helping all families discover the joy of everyday life. We bring that vision to life through our values and culture. .A role in a Supply Chain Facility means being on the very front lines of getting products to the guest as fast as possible, a critical differentiator, and one of the most essential Logistics functions. You will reach beyond the bounds of your team to collaborate across the enterprise and find solutions to support the business. Whether it is through focusing on our regional or upstream distribution centers, import warehouses, or fulfillment and flow centers, you will have a chance to positively affect thousands of fellow team members and Target guests worldwide, further differentiating Target from all the rest.As a Facility Attendant 1, you will perform a wide variety of minor maintenance tasks in addition to all other duties as assigned pertaining to the general upkeep and maintenance of the Distribution Center. This includes, for example:Support Maintenance Technicians in performing mechanical preventative and corrective maintenance throughout the facility, such as servicing and repair of hand tools and minor floor machines.Act as a Qualified Electrical Assistant for electrical safety processes.Support maintenance personnel in installation/removal of assorted items of equipment throughout the facility.Evaluate and inspect the interior/exterior of the facility to determine general upkeep or repair requirements.Change PIT (Powered Industrial Truck) batteries, perform preventative and corrective maintenance on batteries, keep battery equipment clean and painted, keep battery-changing records, and turn in records at shift end.Complete maintenance, cleaning, and troubleshooting of Label Tec PrintersOperate hand and power tools such as drills, saws, sanders, grinders, pneumatic tools, and welders.Construct or repair assets within the facility such as assembling furniture, building shelving or racks, and repairing workbenches utilizing skilled carpentry, welding, and fabrication as required.Complete plumbing tasks such as installation or repairing of faucets and landscape sprinklers, clean stopped drains and clean sumps and drains as required.Perform tasks such as painting and drywall repairs, concrete patching, or minor concrete replacement.Assist in all duties related to the preventive maintenance programs, such as pest control, HVAC, and update records associated with these programs.Remove cardboard bales from bailers, remove trash from buildings using large portable dumpsters, and keep building grounds in a neat and orderly manner.Operate snow removal equipment to clean all walks, roads, and parking lots as assigned.Drive Target owned vehicles to execute yard cleanup, respond to yard incidents, escort vendors, and pick up parts and materials as required.Operate all power equipment in a safe manner, always use safe lifting techniques, and promptly assist in spill cleanup to avoid risk of accidents to team members throughout the facility.Complete necessary paperwork or requisitions for materials as requested, keep daily work order logs for all workUtilize handheld devices and mobile apps to create and close Work Orders with appropriate data (labor hours, downtime, problem/cause/remedy, and parts used)Follow appropriate safety procedures and use Personal Protective Equipment (PPE) while maintaining equipment (Lock Out/Tag Out, Arc Flash, etc.), and ensure a safe work environment by eliminating safety hazards[F&B Only:] Execute sanitation and maintenance standards that support the health of industrial ammonia refrigeration Core responsibilities of this job are described within this job description. However, job duties may change at any time due to business needs.Physical Demands (must be able to perform with or without reasonable accommodation):Lift and carry merchandise weighing up to 47 lbs. regularly, and up to 60 lbs. on an infrequent basis Move about within and around the site with great frequency (up to 10-12 hours per shift)Work in various temperature-controlled environments including temperatures below freezing (Food Distribution Center only)Work in conditions that may include small spaces, dust, fumes/odors, hot/cold temperatures, inside/outside noise, vibration, standing on concrete for long hours and wet or uneven surfacesAccess all areas of the Distribution Center, including the ability to travel on conveyor crossovers and reach mezzanine platforms Have full manual dexterity in both hands and wrists, eye/hand coordination, feet (e.g., operating foot pedals), manual (e.g., picking, pinching, holding, grasping), and wrist motion (repetitive flexion/rotation)About you: Possess or ability to obtain a valid driver’s licenseWork both independently and in a team environment[F&B Only] Comfortable working in a temperature-controlled environmentEffective communication skillsAccurately uses basic math skillsAble to be certified to operate all power equipmentAble to use maintenance tools; saws, drills, etc.Able to read and comprehend labels, tickets, instructions, etc.Able to work with minimal supervision and self-motivateBenefits EligibilityPlease paste this url into your preferred browser to learn about benefits eligibility for this role: https://tgt.biz/BenefitsForYou_C | Pegue esta URL en su navegador preferido para obtener información sobre la elegibilidad de este puesto para recibir beneficios: https://tgt.biz/BenefitsForYou_CAmericans with Disabilities Act (ADA)In compliance with state and federal laws, Target will make reasonable accommodations for applicants with disabilities. If a reasonable accommodation is needed to participate in the job application or interview process, please reach out to candidate.accommodations@HRHelp.Target.com.Application deadline is : 04/07/2025

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:JOB DESCRIPTION- Automotive Technician -CDLUPS is currently seeking a reliable Automotive Technician to join our outstanding fleet maintenance team. He/She will?maintain a diverse range of equipment including delivery vehicles, heavy duty on road tractors and trailers from a variety of manufacturers. Powered vehicle propulsion includes diesel, gasoline and alternative technology power plants (including compressed natural gas, liquefied natural gas, propane, hybrid and electrical in some locations).?Automotive Technicians?must be skilled in troubleshooting and maintaining various systems including hydraulic brakes, air brakes, electrical and engine control. If you're looking for an exciting career in the automotive industry, we want to hear from you! Automotive Technicians must be willing to work 2nd or 3rd shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location’s need.?UPS offers attractive wages, benefits and paid vacations. Uniforms are also provided.?Automotive Technicians?must possess the required hand tools required to perform the applicable job assignment. Responsibilities and DutiesMeets D.O.T requirements required by job assignment Bends, stoops, squats, kneels, crouches, crawls, climbs ladders and stairs, stands, walks, and turns/pivots frequently throughout duration of workday Sits infrequently, as required,?throughout duration of workday Exercises simple hand grasping, power hand grasping, fine hand manipulation, and reaching from foot level to above shoulder level as necessary to complete assigned tasks Operates standard and manual transmission Operates power and pneumatic tools Meets all requirements to be Power Industrial Truck Operations (PITO) certified Knowledge and SkillsCurrent documented automotive mechanical experience Experience using diagnostic equipment, scan tools and personal computer Possesses full complement of personal hand tools Class A or B Commercial Driver's License (CDL) - REQUIREDWorks?full time shifts: 8-10 hours per day, 4-5 days per 7-day week Dependable with ability to report to work on a regular and timely basis and complete scheduled workday on a consistent basis Available to work varying shifts, additional hours and/or overtime depending on service needs Wears personal protective equipment as required Works in an environment with variable temperatures and humidity (climatic conditions), exposure to cleaning materials, petroleum products, dust, dirt, and noise, outside inclement weather, etc. Works cooperatively in a diverse work environment Communicates effectively?through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditions OTHER CRITERIAEmployer will not sponsor visas for position.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position is$36.52 per hour.For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions.Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase programEmployee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

Performs maintenance and handyman services in our Kohl's stores ensuring Company Brand Standards are maintained. Performs all work in a quality manner following all safety rules and regulations. Responsible for meeting budgets and communicating effectively with both internal and external customers.ACCOUNTABILITIESGENERAL MAINTENANCE Responsible for timely and accurate completion of work orders as assigned by supervisor Ensures all necessary material and tools to perform daily work are available and kept in good condition (Kohl’s provides all needed tools) Performs Interior Store Repair and Maintenance as assigned by Territory Facilities Manager with a focus on Door (interior and exterior) and Plumbing (faucet, toilet, hot water heater, etc.) repair Performs Interior Lighting and Electrical repairs including but not limited tolamp/ballast replacement, minor outlet repairs, once per year 90 minute emergency light testing and repairs, etc. Pro cient in other Interior Repair and Maintenance items including but not limited to ooring, carpet, tile, patch and paint, carpentry, laminate, wallpaper, xture, and stroller/ cart, and cleaning equipment repairs Performs exterior maintenance of building including but not limited to low elevation (can be reached with a 12ft ladder), building painting, curb/ramp painting,power-washing, and minor Common Area Maintenance repairs of landscaping, signage, and concrete/asphaltIDENTIFY MAINTENANCE ISSUESAssists stores with Housekeeping problem solving with suggested solutions for Store Associate teams and Contract Cleaning providers to increase CLEAN presence in stores. Communicates safety and cleanliness issues and action plans to resolve with Store Management and Territory Facilities Manager Identi es Interior and Exterior maintenance issues that need resolution by exterior vendors and enters those issues into Web Based Facilities Management program for assignment and completion Communicates recaps regularly to Territory Facilities Manager and/or Store and District Managers of stores visited, wins/opportunities found, as well as issues resolved on store visits. Communication may be verbal or emailQUALIFICATIONSREQUIRED Ability to work independently without direct face to face Ability to effectively communicate with multiple levels in Store organization verbally and written Pro cient in Microsoft Word, Excel, navigation of websites and able to utilize new computer systems, including smartphones 2-4 years of prior maintenance work with a strong focus in Door, Plumbing, Electrical / Lighting, and Handyman Services Prior retail or o ce building maintenance experience Familiar with General Maintenance tools and tasksPREFERREDAbility to repair a variety of other interior/exterior issues as assigned by Supervisor including equipment and CAM itemsSPECIAL Moderate lifting – 25 to 50lbs on a regular basis Ability to travel up to 100% of the time with some overnight stays based on store schedule/location Ability to climb/work on ladders up to 12ft in height in order to address lighting, painting, etc. issues Valid driver’s license with a currently registered vehicle

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Essential Duties and Responsibilities: Respond to emergency situations in a professional and efficient manner with a teamwork approach.Solve and handle Guest concerns with a positive attitude and efficient customer service.Interact with Guests on a one-on-one basis or in large groups and maintain professionalism.Communicate and enforce all rider requirements and restrictions. (i.e. height and/or weight restrictions, proper swimwear, proper riding position, etc.)Responsible for the proper and safe operation of rides/attractions in the water park.Deliver friendly and informative announcements to Guests in small and large groups.Maintain a clean work area to promote a safe working environment and help eliminate hazards.Assist with maintaining park cleanliness throughout the day and end-of-day cleaning tasks.Complete attraction certification tests, corrected to 100% proficiency.Complete Witness Statements and/or other required documentation accurately and legibly as needed.Maintain proper grooming and uniform guidelines at all times.Follow and enforce all park policies and procedures in a fair and consistent manner at all times.Maintain all job duties in all weather conditions including, but not limited to heat, cold, sun, rain, and wind.Perform Water Attendant duties and responsibilities as needed. Skills and Qualifications: Minimum Age: 15Must be able to achieve, and maintain, certification as a Shallow Water Lifeguard.Responsible for maintaining all rescue skills at a “test-ready” level.Must be able to swim a minimum of 50 yards non-stop.Must be able to retrieve a 10lb. brick from a minimum of 5 feet of waterMust be able to swim across 10 feet under water.Must be able to exit out of a pool without using a ladder.Must complete a minimum of 4 hours of in-service training per month.Must be able to work varied shifts including days, nights, weekends, and holidays.Must be able to communicate effectively in the English language, including the ability to read, speak, and understand.Must be able to stand in and move through water for periods of time at water depths from 0 to 6 feet.Must be able to stand and walk a minimum of 7 to 10 hours a day over various surfaces.Must be able to continuously kneel, use hand-eye coordination, maintain a minimum of 20/25 vision or have 20/25 corrected vision.Must be able to continuously pull, push, and hold tubes, rafts, and mats.Must be able to lift and carry a minimum of 50lbs. for a minimum of 25 feet over various surfaces.Must have excellent communication skills to interact effectively with guests, co-workers, and leadership.Must be able to work efficiently in a fast-paced environment.Must be willing to work outdoors in various weather conditionsMust be professional, self-motivated, the ability to multi-task and have an enthusiastic attitudeMust have strong teamwork skills and the ability to work with others Other Functions: All other duties assigned or necessary to support the park as a whole. Perks: FREE admission to our park and other Six Flags Parks!FREE tickets for family and friends!Discounted Season PassesDiscounts on Food and MerchandiseEnjoy Team Member Exclusive Events

Req ID:454193Address: 9650 S. 20th St. Oak Creek, WI, 53154Benefits: * Fuel Your Growth with Love's - company funded tuition assistance program* Paid Time Off * Flexible Scheduling * 401(k) – 100% Match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Hiring ImmediatelyWelcome to Love’s!Maintenance Technicians play a crucial role in our operations by ensuring a safe, clean, and well-maintained environment. Additionally, you'll assist your manager in maintaining smooth operations to swiftly serve our customers. Your dedication significantly contributes to our customers' satisfaction and desire to return. No experience No problem! We will teach you!Job Functions:This is a customer-facing position with general customer service duties including, but not limited to, providing assistance, resolving issues, and ensuring a positive customer experience.Assisting store, restaurant, and truck care departments with general cleaning, maintenance, stocking, and customer service needs.Use of various tools and equipment to clean and maintain the overall facility operations to include, but not limited to, equipment repair and maintenance (HVAC systems, fuel systems, service trucks, refrigeration systems, etc.), pressure washing, plumbing repair, site inspections, and other assigned duties.Additional duties could include cross-training in other departments such as Store Cashier, Restaurant Cashier, Facility Maintenance, and Leadership Roles.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Ability to move, lift 25+ pounds. Ability to work in various temperatures.Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer. Veterans encouraged to apply.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

We want you to help us shape the future of shopping experiences and deliver on our purpose of connecting people with the products and experiences that enrich their lives. Joining Retail Odyssey, an Advantage Solutions company, means joining a network of 65,000 teammates serving 4,000+ brands and retail customers across 40+ countries. All the while, being provided the opportunities, support, and enrichment you need to grow your career.In this role, you will provide in-store merchandising support to Retailers to meet shoppers’ needs. This includes building displays and end caps, resetting shelves with product rotation, and tracking inventory to ensure that stores and suppliers maximize sales opportunities. This is a traveling position that requires regular travel as a primary requirement of the role. Travel roles may require various degrees of travel up to 50% or more of the time. Are you ready to shape the future of shopping and get it done with us What we offer:Competitive wages; $16.00 per hourGrowth opportunities abound – We promote from withinPaid travel with overnight staysNo prior experience is required as we provide training and team support to help you succeedAdditional hours may be available upon requestWe offer benefits that can be customized to meet your family’s needs, including medical, dental, vision, life insurance, supplemental voluntary plans, wellness programs, and access to discounts through Associate PerksNow, about you:Are comfortable interacting with customers and management in a friendly, enthusiastic, and outgoing mannerYou’re 18 years or olderCan perform physical work of moving, bending, standing and can lift up to 50 lbs.Have reliable transportation to and from work locationDemonstrate excellent customer service and interpersonal skills with our clients, customers and team membersInterested in traveling within and outside of your home state, with overnight hotel staysAre a motivated self-starter with a strong bias for action and resultsWork independently, but also possess successful team building skills Have the ability to perform job duties with a safety-first mentality in a retail environmentIf this sounds like you, we can’t wait to learn more about you. Apply Now!

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:UPS is currently seeking a reliable Automotive Technician to join our outstanding fleet maintenance team. He/She will maintain a diverse range of equipment including delivery vehicles, heavy duty on road tractors and trailers from a variety of manufacturers. Powered vehicle propulsion includes diesel, gasoline and alternative technology power plants (including compressed natural gas, liquefied natural gas, propane, hybrid and electrical in some locations). Automotive Technicians must be skilled in troubleshooting and maintaining various systems including hydraulic brakes, air brakes, electrical and engine control. If you're looking for an exciting career in the automotive industry, we want to hear from you!Automotive Technicians must be willing to work 2nd or 3rd shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location’s need. UPS offers attractive wages, benefits and paid vacations. Uniforms are also provided. AutomotiveTechnicians must possess the required hand tools required to perform the applicable job assignment. Responsibilities and DutiesMeets D.O.T requirements and CDL qualifications required by job assignmentBends, stoops, squats, kneels, crouches, crawls, climbs ladders and stairs, stands, walks, and turns/pivots frequently throughout duration of workdaySits infrequently, as required, throughout duration of workdayExercises simple hand grasping, power hand grasping, fine hand manipulation, and reaching from foot level to above shoulder level as necessary to complete assigned tasksOperates standard and manual transmissionOperates power and pneumatic toolsMeets all requirements to be Power Industrial Truck Operations (PITO) certified Knowledge and SkillsCurrent documented automotive mechanical experienceExperience using diagnostic equipment, scan tools and personal computerPossesses full complement of personal hand toolsClass B Commercial Driver's License (CDL) with air brake and fifth wheel - REQUIREDClass A Commerical Driver's License (CDL) preferred.Works full time shifts: 8-10 hours per day, 4-5 days per 7-day weekDependable with ability to report to work on a regular and timely basis and complete scheduled workday on a consistent basisAvailable to work varying shifts, additional hours and/or overtime depending on service needsWears personal protective equipment as requiredWorks in an environment with variable temperatures and humidity (climatic conditions), exposure to cleaning materials, petroleum products, dust, dirt, and noise, outside inclement weather, etc.Works cooperatively in a diverse work environmentCommunicates effectively through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditionsCompensation and BenefitsOur compensation reflects the cost of labor across several US geographic markets. The starting hourly pay for this position is $36.52 with a top rate of $45.65. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions. Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment