Pelham, AL 35124 • (13.1 miles) • Full Time • 10/1/2026

Meet Leaf Home. We turn complex home improvement projects and endless to-dos into achievements. With more than 50% of homeowners worried about the cost and effort of home maintenance, we deliver remarkable, end-to-end experiences. And get the job done right, at every step. Bringing innovative products, the best people, and the highest standards to every project.Trusted by more than 1 million homeowners across the US and Canada, we are America’s largest direct-to-consumer full-service provider of branded home services and products. Our products, including the patented LeafFilter gutter protection system, have earned numerous awards and recognition from Good Housekeeping, Qualified Remodeler, Angi, Consumer Reports, This Old House, and other consumer review platforms.We are powered by extrao

Hoover, AL • (17.7 miles) • Full Time • 10/1/2026

Kana Hotel Group'smission is to be one of the most admired and service quality driven hotel companies in the industry. We will accomplish our goal by creating an atmosphere of friendly employee behavior and delivering the highest quality service and value to our guests. From our Team Members to our General Managers and Regional Support team, we seek people who have a passion for the hospitality business and want to grow with us. Most of our existing leadership team members have been promoted from within the company.As a member of our team, you will be expected to contribute your talents and energies to improve the environment and quality of the company, as well as the company’s services. In return you will be given opportunities to grow and advance in your career. Kana Hotel Group is prou

Alabaster, AL • (7.9 miles) • Full Time • 10/1/2026

HVAC Maintenance TechnicianResponsibilities:Perform daily inspections of the entire facility.Perform routine maintenance and repairs on building HVAC systems and equipment.Identify non-HVAC issues and arrange for the necessary repair work by third party contractors.First point of contact to respond to after hour/emergency calls and address property manager concerns in a timely and professional manner.Maintain a clean Facility and ensure compliance with safety regulations.Required Skills:Strong customer service skills to effectively communicate with property management to address their concerns and needs.Ability to complete work orders on a timely basis.Ability to troubleshoot and diagnose HVAC, plumbing, and electrical problems.Ability to Perform minor HVAC, plumbing, and electrical repair

Alabaster, AL • (7.9 miles) • Full Time • 10/1/2026

Talento Search Group has an opening for a CNC Programmer in Alabaster, Alabama. This is a direct-hire position and it's workingin an air conditioned environment.Duties & Responsibilities:Plan machining operation by reviewing blueprints, work orders, engineering drawings, and machining parametersMachine materials to customer specificationsProgram machinesChange tooling, setup machines, transfer commands to CNC modulesoperate CNC machines, and insert control instructionsReview program specifications to set machine parametersModify cutting programsControl coolant systems and maintain machinesClean machinesPerform manual machining on manual lathes, drill presses, and millsExperience Needed:At least 5 years of CNC machining experienceMust have CNC programming experienceExperience with Milltonic

Birmingham, AL 35244 • (16.4 miles) • Full Time • 10/1/2026

NOW HIRING HVAC TECHNICIANS! Are you an experienced HVAC professional looking for a great opportunity with a company that values its employees? HVAC Experience Preferred (2+ Years) High Pay Based on Experience Family-Owned & Operated Company Supportive Team Environment Steady Work & Growth OpportunitiesJoin a company where you're more than just a number. As a family-owned business, we take pride in treating our employees with respect and providing a positive work environment where hard work is rewarded.Competitive wages Full-time position Advancement opportunities availableIf you're reliable, hardworking, and ready to build a career with a company that cares, we want to hear from you!\nCompany DescriptionJoin a company where you're more than just a number. As a family-owned business, we t

Birmingham, AL 35216 • (20.5 miles) • Full Time • 10/1/2026

Job Title: Civil Designer / CAD TechnicianCompany: Basin Engineering & SurveyingLocation: Birmingham, AL (On-Site)Job Type: Full-TimeAt Basin Engineering & Surveying, we know that the difference between a good project and a great one lies in the details--the grading, the drainage, and the precise placement of every utility. If you are a CAD professional who wants to take your designs off the screen and into the real world, you belong here.We are a growing, multi-disciplinary engineering and land surveying firm headquartered in the New Orleans area. We don't just draft lines; we shape the infrastructure of tomorrow. We hold professional engineering licenses in 27 states, which means our team gets the project variety and scale of a massive national firm, while maintaining the close-knit, col

Birmingham, AL 35242 • (21.1 miles) • Full Time • 10/1/2026

Under the supervision of the Operations Manager, the Service Technician serves customers by performing Factory-authorized Start-up Service and In-service Warranty and Maintenance of HVAC systems and our other represented products. This position delivers a positive customer experience by providing premier start up and commissioning of new products, identifying system issues, completing necessary repairs and helping to maintain equipment to factory specifications.RESPONSIBILITIES: This role is responsible for the following:Serving existing customers by investigating complaints, conducting tests and resolving problems.Establishing service by studying system requirements, ordering and gathering components and parts, completing the installation, and performing acceptance tests.Maintaining rappo

Bessemer, AL • (21.4 miles) • Full Time • 10/1/2026

Welder (Manufacturing)Job Type: Full-timeDeploy's Client is revolutionizing the construction industry by integrating advanced manufacturing principles with innovative technology to deliver high-quality, modular building solutions. We are driven by a mission to rethink how buildings are designed, fabricated, and delivered, ensuring efficiency, scalability, and sustainability.DescriptionWe are seeking a detail-oriented Welder who is responsible for laying out and fabricating structural steel to build metal structures. Weld and cut steel, interpret blueprints, and work with concrete reinforcing steel bars.RequirementsJob ResponsibilitiesRead and interpret blueprints for structural steel fabrications.Pass 3G 1 thick plate test with backing in accordance with AWS D1.1 Structural Welding Code us

Birmingham, AL 35209 • (23.8 miles) • Full Time • 10/1/2026

PRIMARY JOB FUNCTION - Linen Technician The primary purpose of the Linen Distribution Technician position is to ensure daily responsibilities are completed in a safe, timely, and efficient manner. DUTIES AND RESPONSIBILITIES Take direction from the Linen Distribution Manager (LDM) and complete duties and expectations in a safe, timely, and efficient manner. This can include, but is not limited to: Working the assigned schedule without delay, tardiness, or absenteeism;Completing assigned job duties including delivering of clean linen in a neat and orderly fashion, collection and transportation of soiled linen, accurate recording inventories and quantities of linen, and organizing and cleaning the linen storage areas in accordance with Crown policies and procedures and specific instruction f

Childersburg, AL 35044 • (24.2 miles) • Full Time • 10/1/2026

About UsRivers Electrical Services/ d.b.a. REAMCO (Rivers Electrical Apparatus Manufacturing Company) specializes in designing and manufacturing high-quality switchgear manufacturing at our Childersburg, AL facility. With a strong commitment to innovation and customer satisfaction, we are seeking an Entry Level Assembler to join our dynamic team and contribute to our mission of delivering exceptional electrical solutions.Job DescriptionREAMCO LLC is looking for a Production Control Specialist to join our engineering and design team in Childersburg, Alabama. This position requires managing production schedules, material flow, and shop floor workflow to ensure low- and medium-voltage electrical equipment is built and delivered on time. They act as the key link between sales, engineering, pur

Fairfield, AL • (26.2 miles) • Full Time • 10/1/2026

Job Description:The Maintenance Technician Electrical job is a core component for our maintenance forces and requires a trained and experienced individual to continue our success as one of world’s largest steel producers. The Maintenance Technician Electrical performs all electrical maintenance functions necessary to maintain all operating and service equipment using standard and specialized tools and equipment including mobile equipment, pendant and overhead cranes and forklifts. As a Maintenance Technician Electrical, you will install, maintain, repair, and operate a broad range of electrical systems and electrical equipment in a heavy industrial environment to maintain continuous operations.Responsibilities:Troubleshoot, install, maintain, and repair a broad range of electrical and elec

Birmingham, AL 35233 • (26.7 miles) • Full Time • 10/1/2026

Prior experience as an Automotive Technician REQUIRED. Need to fill an expanded shop at a already top performing dealership!!!Ford certification or diesel experience a PLUS!-Our top techs are producing 80-100 hours per week -Top warranty time pay in the areaBenefitsEmployee recognition programsEmployee discounts on vehicle purchases, parts and serviceMedical and prescription coverageSupplemental benefit plans including dental coverage, short-term disability, long-term disability, supplemental life insurance and legal servicesHands on management team to help you succeedPosition Description and ResponsibilitiesAutomotive technicians / auto mechanics perform work specified on maintenance and repair orders with efficiency and in accordance with dealership and/or Ford standardsFord automotive t

Birmingham, AL 35201 • (27.4 miles) • Full Time • 10/1/2026

Employment Type: HourlyWork Arrangement:OnsitePosition Summary:Forklift Operator II is a forklift operator who is cross trained across all functional areas and duty assignments routine to daily lift truck operations at the manufacturing facility.Major Duties and Responsibilities:Staging orders - can accurately complete the order selection process and stage orders in appropriate areas for loading by loaders. To complete orders following the proper procedures which include use of the RF System, proper documentation and selecting products and lots as instructed.Loading trucks - can accurately load customer orders on to trucks for dispatch or the drop lot following proper loading procedures. Procedures include but are not limited to proper safety protocol and equipment inspections, order revie

Birmingham, AL 35201 • (27.4 miles) • Full Time • 10/1/2026

Job Title: Civil EstimatorJob DescriptionThe Civil Estimator is responsible for preparing accurate and competitive cost estimates for heavy civil projects, including foundations, embankments, and concrete structures. The role involves developing comprehensive bid proposals, analyzing project risks, and supporting project execution from preconstruction through contract award.ResponsibilitiesPrepare accurate cost estimates for heavy civil, utility, roadway, and structural concrete projects.Collaborate with operations, project management, subcontractors, and suppliers to develop comprehensive bid proposals.Analyze project risks and support successful project execution.Work closely with general contractors to generate estimates.Utilize Procore and other estimation software for project planning

Birmingham, AL 35203 • (27.5 miles) • Full Time • 10/1/2026

Mobile Fleet Specialists of Birmingham has another DIESEL TECHNICIAN opening!!We are looking for a Diesel Technicianto join our team and be part of one of the fastest growing companies in the Greater Birmingham Area! You will be responsible for servicing and repairs of Medium to Heavy Duty Diesel Trucks and Trailers.Responsibilities:Proven ability to perform diagnostics and repairs on Medium to Heavy Duty Diesel Trucks and TrailersPerform routine preventative maintenance servicesUse diagnostic tools to diagnose basic to complex diesel engine issuesPerform quality control inspections prior to release of vehicleQualifications:Previous experience as a mechanic (3-5 years experience required)Knowledge of shop equipment, must have own tools applicable to scope of work to be performedMust be wil

Birmingham, AL • (28 miles) • Full Time • 10/1/2026

ARE YOU DRIVEN? EverLine Coatings and Services is a premier line painting and maintenance company that proudly has a location in Birmingham, AL. We provide high quality line painting and pavement maintenance services for parking lots, roadways, parkades and warehouses. In addition to painting services, we offer power washing, asphalt sealcoating, crackfiling and more. With 100+ franchise locations from coast to coast, we are transforming our industry and we aren’t slowing down!Our success is a direct result of our dedicated team. Every employee at EverLine is committed to providing complete customer satisfaction in the delivery of our services. We work hard, have fun and have an amazing corporate culture. Our teams are DRIVEN. Dedicated, Resourceful, Integrity-Focused, Value-Based, Excelli

Birmingham, AL • (28 miles) • Full Time • 10/1/2026

Job Title: Experienced HVAC Service TechnicianCompany: Plus One Heating and AirLocation: Birmingham, AL & Surrounding Areas Job Type: Full-TimeJoin Our Team!Are you a skilled and motivated HVAC Service Technician looking for a stable, rewarding career with a company that values its employees? Plus One Heating and Air is a leading provider of heating, ventilation, and air conditioning services in the Homewood area, and we are looking for a dedicated professional to join our growing team. We pride ourselves on exceptional customer service and high-quality workmanship. If you are passionate about what you do, we want to hear from you!Position Summary:The HVAC Service Technician will be responsible for installing, maintaining, and repairing heating, ventilation, air conditioning, and refrigera

Birmingham, AL • (28 miles) • Full Time • 10/1/2026

Lead HVAC InstallerEmployment Type: Full-TimeCompensation: $30.00 - $40.00 per hour (based on experience and demonstrated abilities)About UsWe are a growing HVAC company committed to delivering exceptional service and quality workmanship to our customers. While we maintain the agility and personal touch of a smaller operation, we hold ourselves to the highest professional standards in every aspect of our business. We believe that integrity, reliability, and strong character are the foundation of great work, and we're looking for team members who share these values.Position OverviewWe are seeking an experienced and dependable Lead Installer to join our team. This is a hands-on position for a skilled professional who takes pride in their work, leads by example, and consistently delivers qual

Birmingham, AL • (28 miles) • Full Time • 10/1/2026

Automotive Service Technician Luxury Import DealershipBirmingham, AL | Flat Rate: $35–$50/hr | Relocation Assistance AvailableWe pay above market. We pay production bonuses. We pay CSI bonuses. We pay tenure bonuses. We pay your health insurance. We'll even help pay to move you here.Are you a skilled technician looking for a shop that rewards production, invests in your training, and gives you more work than you can handle? This might be your next move.We're a premium luxury import dealership currently expanding our service department adding capacity because demand already exceeds what our current team can handle. That means consistent hours, strong earning potential, and real room to grow.What you'll be doing:Diagnose and repair vehicles per manufacturer and dealership standardsCommunicat

Birmingham, AL • (28 miles) • Full Time • 10/1/2026

Tool & Die Maker – Metal Stamping CompanyLocation: AL. | $30/hr to $40/hr Pending Experience + OT + Relocation Assistance (Great Package!)There is NO SPONSORSHIP being considered for this job role. If you need sponsorship NOW or in the FUTURE - PLEASE DO NOT APPLY.If You Don't Have Tool & Die Experience in the Automotive OEM or Tier 1 World - "Please Don't Apply" Benefits: Full health coverage, 401k, PTO, great team environmentWe're a fast-growing company that makes precision parts for cars. We're looking for experienced Tool & Die Makers to help us build and maintain the tools we need to launch new products.What You’ll Do:Build and fix metal stamping dies (progressive, transfer, and deep draw)Work with other departments to get dies ready for productionSolve problems with dies quickly on t

Birmingham, AL • (28 miles) • Full Time • 10/1/2026

As a Controls Engineer at Automation Solutions, you will help design, program, commission, integrate, and support custom automated and robotic systems. This is a hands-on engineering position involving both hardware and software, with responsibility for supporting projects from initial concept through installation and post-delivery support.The Controls Engineer will work with PLCs, HMIs, variable frequency drives, servo systems, robots, vision systems, and other industrial automation technologies. The position includes work at our Birmingham facility and at customer locations, with approximately 25% travel required as necessary to support system commissioning, installation, troubleshooting, and service.Successful candidates will demonstrate strong technical aptitude, practical industrial c

Birmingham, AL • (28 miles) • Full Time • 10/1/2026

If you're looking for the benefits of joining an industry leader, with a high-charged, energy-filled environment, then you can stop looking, because you have found what you're looking for in the Certified Automotive Technician position. Bring your energy, drive, and motivation to Hertz, and set your goals on cruise control!The Certified Automotive Technician is the top of our maintenance team with a focus on diagnostic and repair. This role will work to keep all equipment in running condition through our effective preventative maintenance program, as well as taking on the responsibility of handling complex repairs such as engine and transmission overhauls. This position is a master technician and assumes a leadership role with product knowledge and a standard of quality.What You’ll Get:The

Vance, AL 35490 • (29.6 miles) • Full Time • 10/1/2026

Job Title: Production Supervisor (2nd Shift: 2:00pm - 10:10pm)Department: BAL OperationsReports to: Production ManagerFLSA Status: ExemptPosition Overview: We are seeking a motivated and hands-on Production Supervisor to lead our Final Side operations along side the Subside Production Supervisor, overseeing a team of approximately 10 employees. This role is responsible for driving productivity, maintaining quality standards, and fostering a safe, team-oriented work environment in a fast-paced manufacturing setting.Key Responsibilities:Lead, coach, and develop a team to meet daily production goals and performance expectationsPlan, schedule, and assign personnel to ensure efficient production flowMonitor production performance, identify inefficiencies, and implement improvementsEnforce stand

Pell City, AL • (40.9 miles) • Full Time • 10/1/2026

The Truck Shop Mechanic will be an integral part of our in-house maintenance team, responsible for ensuring the operational reliability of our fleet of heavy vehicles. Reporting directly to the Shop Manager, this role requires a skilled mechanic who can perform detailed diagnostics, repairs, and preventative maintenance while adhering to safety standards. The position is based on-site with no travel requirements.ResponsibilitiesPerform vehicle maintenance and engine repair on heavy trucksService and repair hydraulic systems and componentsConduct diagnostic testing and fault finding using specialized toolsCarry out preventive maintenance to reduce downtime and extend vehicle lifespanPerform safety inspections and ensure compliance with regulationsReplace worn or damaged parts efficiently an

Birmingham, AL 35203 • (27.5 miles) • Full Time • 10/1/2026

Job Overview:D7 Pneumatics LLC is seeking highly skilled and experienced Millwrights with strong welding capabilities and steel mill experience to join our Alabama maintenance division.This role will involve maintaining, repairing, and installing industrial machinery across a variety of sectors, including steel mills, cold mills, sawmills, and powerhouses. The ideal candidate will have a solid background in mechanical systems, a strong understanding of welding techniques, and the ability to work in a fast-paced, safety-focused environment.Key Responsibilities:Maintenance & Repairs: Troubleshoot, repair, and maintain mechanical equipment, conveyor systems, crushers, pumps, motors, gearboxes, and other industrial machinery in coal mining operations, sawmills, and auto plants.Welding & Fabric

Alabaster, AL • (7.9 miles) • Full Time • 10/1/2026

Diversified Support Services is seeking dependable CNC or Plastic Injection Molding Operators in the Alabaster, AL area to support manufacturing operations in a hands-on industrial environment. This role involves industrial fabrication equipment and following established safety procedures in a fast-paced facility. Responsibilities Operating CNC machines and relative equipmentSafely remove finished parts from equipment and complete required finishing and packaging processes.Follow machine operating procedures, production requirements, and workplace safety guidelines.Participate in hands-on training and work closely with trainers and experienced team members to learn equipment operations. Qualifications Manufacturing, CNC and or injection molding, or similar industrial experience is a plus.

Birmingham, AL • (28 miles) • Full Time • 9/30/2026

Welding /Fabricating experience preferred.Must have a valid Driver's License with clean driving history.Ornamental iron shop that does blacksmithing. Willing to train. Experience a plus.Must be able to read a tape measure, grind, paint and be ready to learn.Pay is based on skill level.Must be able to add measurements with fractions.Must be able to mig weld.PLEASE DO NOT APPLY IF YOU CAN NOT BUILD A SQAURE BOX USING TUBULAR STEEL>

Birmingham, AL • (28 miles) • Full Time • 9/30/2026

We are currently seeking a TIRE AND LUBE TECHNICIANto become an integral part of our team!You will diagnose, adjust, repair, andoverhaul automotive vehicles.Responsibilities:Diagnose and repair automotive vehiclesPerform routine vehicletune-ups and maintenanceProvide labor and time estimates for automotive repairsInspect and test new vehicles for necessary adjustmentsQualifications:Strong mechanical aptitude and troubleshooting skillsDeadline and detail-orientedWE ARE WILLING TO TRAIN. JUST LOOKING FOR A GOOD ATTITUDE!\nCompany DescriptionLOCALLY OWNED TIRE AND AUTOMOTIVE CENTER LOOKING TO HIRE GREAT PEOPLE FOR OUR TEAM!WILLING TO TRAIN JUST LOOKING FOR A GOOD ATTITUDE AND WILLINGNESS TO LEARN!!Company DescriptionLOCALLY OWNED TIRE AND AUTOMOTIVE CENTER LOOKING TO HIRE GREAT PEOPLE FOR OUR

Birmingham, AL • (28 miles) • Full Time • 9/30/2026

Fire Protection Project ManagerThe Fire Protection Project Manager is responsible for overseeing and managing fire protection projects from initiation to completion. This role includes coordinating field technicians, liaising with clients, ensuring code compliance, and delivering projects on schedule and within budget. The ideal candidate possesses strong knowledge of fire protection systems, proven project management experience, and excellent communication skills.Essential Duties & ResponsibilitiesManage multiple projects, including new installations and retrofits to existing buildingsServe as the primary point of contact for clients, technicians, subcontractors, and internal departments.Develop project scopes, schedules, and budgets, track progress and performance.Ensure compliance with

Birmingham, AL 35210 • (29.3 miles) • Full Time • 9/30/2026

Do you enjoy working on cars, computers, gaming systems, 3D printers, robotics, electronics, or simply figuring out how things work? We are looking for someone who is naturally technical, mechanically inclined, comfortable with computers, and enjoys hands-on problem solving.This position combines computer-based work with hands-on manufacturing in a fast-paced, quality-driven production environment. Previous CNC or machining experience is a plus, but technical aptitude and the ability to learn are just as important.SHIFT: 2:00 PM - 11:00 PM Monday - FridayPAY:$18.00 per hourResponsibilitiesUse computer-based CAM software and specialized manufacturing equipmentProcess production orders to precise customer specificationsLearn established machining processes, tooling, and fixturesFollow detail

Birmingham, AL • (28 miles) • Full Time • 9/30/2026

Job descriptionWe are seeking Pipe Welders. Candidates must be familiar with process piping systems with specific attention to commercial and heavy institutional installations.We offer competitive wages and comprehensive benefits. Weekly pay, direct deposit, full-timeRequirements for pipe welders -Experience welding stainless and carbon pipe 6010 root/7018 outQualifications:Must have prior carbon 6010/7018 Pipe Welding experience preferably in commercial workFamiliarity with welding tools and proceduresAbility to interpret blueprintsAbility to handle physical workloadJob Type: Full-time\nCompany DescriptionWe offer an extensive network of professionals, developed over 50 years of combined experience. Our business structure is simple - there is no bureaucracy to struggle with.Company Descri

Birmingham, AL • (28 miles) • Full Time • 9/30/2026

JOIN OUR TEAM AT AVANS ELECTRIC! NOW HIRING 3-5 EXPERIENCED SERVICE TECHNICIANSAvans Electric is a fast-growing, family-owned service company with room for advancement. We are committed to delivering top-tier service to both Residential and Commercial clients.We pride ourselves on professionalism, integrity, and a strong team culture.We are looking for Motivated and Experienced team players with Good Attendance History. If you have a passion for the electrical trade, take pride in your work, and thrive in a collaborative customer focused environment --- we want to hear from you!WHY WORK WITH US?Competitive Pay and Bonuses ($60,000 to more than $80,000 based on experience)Paid Holidays and Vacation401k Plan MatchHealth, Vision and Dental InsuranceCompany VehicleResponsibilities:Install and

Birmingham, AL 35223 • (25.1 miles) • Full Time • 9/29/2026

Estimator / Project Manager – Heavy Civil ConstructionWe are seeking an Estimator/Project Managerto lead project deliveryfrom pre-construction through closeout. You’ll work closely with clients, engineers, and internal teams to ensure bids are competitive and execution is seamless.Successful Team Members in This Role WillLead the full lifecycle of infrastructure projectsfrom estimating and bidding through scheduling and executionPrepare detailed cost estimates for labor, materials, equipment, and subcontractorsSubmit competitive bid proposals and support business development strategyCollaborate with superintendents and field teams to maintain schedule, budget, and safety complianceServe as the primary point of contact for clients, subcontractors, and vendors throughout the projectMonitor p

Birmingham, AL 35233 • (26.7 miles) • Full Time • 9/29/2026

About UsClayco is a full-service, turnkey real estate development, master planning, architecture, engineering, and construction firm that safely delivers clients across North America the highest quality solutions on time, on budget, and above and beyond expectations. With $8.1 billion in revenue for 2025, Clayco specializes in the "art and science of building," providing fast track, efficient solutions for mission critical, industrial, life sciences, power & energy, aviation, commercial, institutional, residential and sports & entertainment related building projects.About Clayco Systems and Equipment Innovations (SEI)As part of our integrated service offerings, Clayco's Systems and Equipment Innovations (SEI) offers a turnkey solution to execute complex building systems and process systems

Leeds, AL • (30.7 miles) • Full Time • 9/29/2026

Maintenance Journeyman 3rd Shift Leeds, AL Hours: 9pm-5:30am Sun-Thurs OT Friday Temp to Hire To excel in this role, you need over 5 years of industrial maintenance experience in a manufacturing setting, along with an Associates Degree or equivalent technical qualification, and/or experience. Strong mathematical skills and mechanical reasoning are crucial for troubleshooting and repairing various systems including AC & DC motors, PLCs, and power distribution systems. Effective communication in English and basic computer skills are essential for managing work orders and interacting with team members. Experience with various measuring tools is preferred. The role requires flexibility to work overtime and odd hours during emergencies, attention to detail, and the ability to work independently

Brookwood, AL • (34.6 miles) • Full Time • 9/29/2026

Warrior Met Coal (Brookwood, AL.) has current openings for Underground Mining Foreman. There are several positions open at this time that focus on different specialties.Warrior is a U.S.-based, environmentally, and socially minded supplier to the global steel industry. We are dedicated entirely to mining non-thermal metallurgical coal used as a critical component of steel production by metal manufacturers in Europe, South America, and Asia. Warrior is a large-scale, low-cost producer and exporter of premium quality metallurgical coal, also known as hard-coking coal (HCC), operating highly efficient longwall operations in its underground mines based in Alabama.The Foreman’s primary purpose is to supervise, coordinate and schedule the activities of all mine operations personnel.Supervise, co

Cottondale, AL 35453 • (37.2 miles) • Full Time • 9/29/2026

About Core Focus PersonnelCore Focus Personnel, LLC is a staffing, training, and logistics company proudly serving Alabama's automotive and manufacturing industries.Now Hiring: Stand-Up Forklift OperatorsAutomotive supplier in the Cottondale, AL area looking for qualified Stand-Up Forklift Operators.Pay: Starting at $18.00 per hour.Employees can earn a gross average of $875/ weekly working an average of 50 hours per week!Job ResponsibilitiesSafely operate a forklift to move racks and materials throughout the facility, including shipping and receiving operations.Comply with all company policies and government safety procedures and regulations.Complete the necessary paperwork related to shipping and receiving, production, etc.Maintain production standards and achieve established production g

Pell City, AL • (40.9 miles) • Full Time • 9/29/2026

Mechanical EngineerDepartment: Engineering & ManufacturingReports To: Chief EngineerFLSA Status: ExemptLocation: On-site (manufacturing environment)Travel: Occasional (domestic; international may be required)Position SummaryJoin our engineering team and help build the products that keep bulk material moving. As a Mechanical Engineer, you’ll take ideas from concept to productiondesigning components and assemblies, supporting application and quoting, and partnering with manufacturing to turn solid engineering into reliable, high-quality product on the floor. This role offers hands-on involvement in new product development, continuous improvement, and D365 data accuracy (BOMs/routings/cost inputs) that directly impacts execution, margins, and customer satisfaction.Key ResponsibilitiesEngineer

Calera, AL 35040 • (1.6 miles) • Full Time • 9/29/2026

We are seeking an Overhead Crane & Runway Installation Foreman to join our team. This position requires traveling in the Southeast supervising the installation of overhead cranes, crane runways, and structural support systems at commercial and industrial facilities.Job ResponsibilitiesSupervise and install overhead cranes, crane runways, and related structural components.Read and interpret blueprints and installation drawings.Safely operate manlifts and other aerial access equipment.Work at elevated heights while following all OSHA and site safety requirements.Assist with rigging, positioning, and securing heavy materials.Perform general mechanical assembly and installation work.Travel throughout the Southeast to customer job sitesMaintain a clean, safe, and professional work environment.R

Birmingham, AL • (28 miles) • Full Time • 9/28/2026

We are looking for a reliable and skilled Maintenance Technician to join our team at a 332-unit residential community in Birmingham, AL. This is a great opportunity to work in a positive environment with a team that values quality and efficiency.Key Responsibilities:Complete service requests/work orders in a timely and professional mannerPerform general maintenance including plumbing, electrical, HVAC, and appliance repairsMaintain property standards and address maintenance issues promptlyDeliver excellent customer service to residentsQualifications:HVAC certification requiredPrevious apartment maintenance experience preferredStrong troubleshooting and problem-solving skillsMust have own toolsReliable transportation requiredAbility to work independently and as part of a team

Adamsville, AL 35005 • (35.4 miles) • Full Time • 9/28/2026

LEMOINE, a Great Place to Work®-Certified company is seeking an experienced Senior Preconstruction Manager in commercial building construction.The Senior Preconstruction Manager is responsible for gathering any and all data required in preparing conceptual, negotiated, and competitive bid estimates for multiple project delivery methods across a wide variety of project types. Responsible for conceptual estimating, cost analysis, and estimate coordination to ensure accurate and complete estimates. Responsible for managing outside design teams, providing qualitative work product feedback, and design schedule adherence while leading a preconstruction team through multiple, iterative budget estimates and balancing design goals and construction cost limitations to arrive at the best value to ens