Decatur, AL 35601 • (2.5 miles) • Full Time • 9/27/2026

Shift: 7:00AM - 3:30PM Monday - Friday Job Summary: The Automation & Controls Specialist is responsible for maintaining and improving automation control systems integral to production processes. Troubleshoot and implement controls improvements to increase efficiency, reduce costs, and improve reliability. Increase equipment uptime, efficiency, and quality through the utilization of technology pursuing continuous equipment improvement. A secondary responsibility is to support training, Robot and PLC programming, motion control programming, operator interface programming and fault recovery, temperature control, robotic, vision, Support I&E tech on Instrumentation troubleshooting, electrical troubleshooting and facility systems programming and implementation. Supervisory Responsibilities: Pro

Huntsville, AL 35805 • (23 miles) • Full Time • 9/25/2026

This position requires that you must be a US Citizen for consideration and meet all Federal Contractor employee requirements. Nomad GCS does not support the H1B Visa for this position. Position: Mechanical Engineer II Division: Innovative Solutions Group Department: Mechanical Engineering Status: Full-time Nomad GCS is currently seeking a Level II Mechanical Engineer. Please note the Level II Expectation in red below. Overview: Nomad Global Communications Solutions is a leading provider of communication and response products serving a wide variety of customers. Our purpose is to be the solution when every minute matters. We seek a candidate that is self-inspired to learn and demonstrates a high degree of customer service while positively contributing to our team. Mechanical Engineers (ME)

Huntsville, AL 35816 • (23.5 miles) • Full Time • 9/25/2026

Radial Solutions Inc., (RSi) is a Service-Disabled Veteran Owned Small Business (SDVOSB) located in Huntsville, AL. At RSi, we understand that people are the most important aspect of our business! As a service provider to the government, we aim to hire right people for each role. We provide professional development opportunities to support continued professional growth. We strive to foster an inclusive, welcoming, and respectful environment for every team member. RSi is looking to fill a Production Control Specialist II position to support our NASA customer on the Marshall Engineering Technicians and Trades Support contract (METTS). The Production Control Specialist II is responsible for compiling and recording production data for reports on volume of production, consumption of material, q

Huntsville, AL 35808 • (19.5 miles) • Full Time • 9/25/2026

CODEplus is currently seeking a Radio Frequency (RF) Engineer to support it’s operations in Huntsville, AL. This position is onsite full-time. The candidate will provide Radio Frequency (RF) Analysis, Simulation, and Development support for space-based RF communication systems with inter-operability integration across multiple US Government Customers. This position will require active security clearance to perform daily tasks. Support customer’s Moon Base Utilities and Infrastructure Group, Deep Space Communications Network, and future RF infrastructures. The successful candidate will perform tasks such as: Provide analyses of existing transmitters, receivers, and antenna designs. Participate in requirements and data reviews providing inputs and comments. Support test campaigns in the inte

Huntsville, AL 35806 • (21.3 miles) • Full Time • 10/18/2026

Description Looking for an opportunity to make an impact? At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. We empower our teams, contribute to our communities, and operate sustainable. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. Your greatest work is ahead! Leidos’ Defense Systems Electronics Manufacturing Facility is seeking a Master Production Scheduler to join our team of highly skilled planning and production scheduling professionals in the Huntsville, Alabama location. The Master Production Scheduler will act as a lead to the electronics manufacturing

Huntsville, AL • (21.7 miles) • Full Time • $28.00 to $33.00 / hr • 10/12/2026

The Operations Control Coordinator plays a key role in managing and optimizing production processes within a large team environment. This position involves extensive collaboration across departments to ensure seamless workflow, effective resource allocation, and adherence to quality standards. Utilizing ERP and custom in-house software, the coordinator oversees scheduling, inventory, and documentation to support efficient manufacturing operations, particularly in sheet metal production. Other duties designated by VP of Operations - you will work closely with this department. Responsibilities Schedule production activities to meet operational targets Monitor Inventory and coordinate with purchasing Oversee workflow coordination and ensure smooth process transitions Monitor quality control s

Hartselle, AL • (9.7 miles) • Full Time • 10/10/2026

Job Title: Controls Technician Job Description The Controls Technician supports production and manufacturing equipment in a fast-paced industrial environment, focusing on PLC-based control systems and automated machinery. This hands-on role requires strong electrical, controls, automation, and troubleshooting experience, with the ability to work independently while supporting a variety of PLC-controlled machines and manufacturing systems across the facility. The technician connects to PLCs via laptop, interprets PLC logic, identifies and resolves fault conditions, and ensures reliable operation of automated production equipment. Responsibilities Connect to PLCs via laptop to access, monitor, and adjust control programs as needed to support production operations. Interpret PLC logic and lad

Decatur, AL 35601 • (2.5 miles) • Full Time • $40.87 to $50.96 / hr • 10/9/2026

Job Title: Process Engineer Job Description The Process Engineer supports safe, efficient, and cost-effective operation of chemical manufacturing processes by providing technical expertise, process design, and continuous improvement initiatives. This role focuses on optimizing existing operations, scaling up new products from development to production, and ensuring compliance with safety, environmental, and regulatory requirements. The Process Engineer collaborates closely with operations, maintenance, and other engineering staff to enhance process performance, reduce costs, and maintain high product quality. Responsibilities Demonstrate prompt, regular, and dependable attendance as an essential function of the role. Take responsibility for the technical and economic aspects of process uni

Cullman, AL 35055 • (31.8 miles) • Full Time • $27 / yr • 9/25/2026

POSITION SUMMARY: This position supports department objectives by leading plastic department improvements. Accomplishing daily tasks to ensure maximum productivity, job safety, and quality. The position will require competencies that include training, set-up, molding, tooling, quality inspection, and leadership. PRINCIPAL RESPONSIBILITIES Assist manufacturing floor with machine efficiency, productivity, and other daily tasks Implement lean manufacturing techniques to support process improvements, inventory reduction, and overall operating efficiencies within the area Maintain, modify, and enhance injection molding processes to minimize scrap, reduce down time and optimize cycle time, including programming and setting up parameters of injection machines Assist with preparation for start of

Hartselle, AL • (9.7 miles) • Full Time • 10/10/2026

Cut Line Operator Automation Personnel Services is looking for a Cut Line Operator for a company based inHartselle,AL.In this role, you will have the opportunity tooperate equipment in a wire and cable manufacturing environment. Pay Rate $22.57.00 per hour Schedule and Hours Monday through Friday,1100pm to700am. Cut Line Operator Duties and Responsibilities Set up machines as required. Pick product and string up. Ensure all products are controlled;machine settings, counters and clocks. Spool product, wrap product, label product, palletize product for shipment. Scan product and place product back into inventory as required. Cut Line Operator Qualifications and Requirements Stand for long periods of time. Ability to climb up and down frequently. Ability tosee color with accuracy. Ability to

Huntsville, AL 35898 • (19.7 miles) • Part Time • 10/21/2026

Overview The Electronic Technician II installs, troubleshoots, and maintains electronic security systems, including access control, intrusion detection, and networked security components. This role supports Department of Defense security projects at various locations and works both independently and as part of a team. **This position is contingent upon contract award** Responsibilities What You’ll Do Install and service electronic security systems (access control, intrusion detection). Read and work from blueprints, wiring diagrams, and schematics. Install conduit, cabling, equipment racks, and system hardware. Configure systems, support network integration, and perform testing. Document work performed and maintain tools and equipment. Provide on-site technical support and customer trainin

Trinity, AL 35673 • (8.1 miles) • Full Time • 10/20/2026

Shift - Friday-Sunday Hours - 6:00PM - 6:30AM Full-Time Position Medical, Dental, Vision Insurance available Job Summary: Thejanitor position is responsiblefor keepingbuildings clean, sanitary, orderly, and in good condition.This position may work for various departments such as Asset, Operations, or others as assigned. Supervisory Responsibilities: None Duties/Responsibilities: Gather and empty trash. Sweep, mop, or vacuum buildingand breakroomfloors. Clean restrooms and stock them with supplies. Clean spills and other hazards with appropriate equipment. Wash windows, walls, and glass. Clean and disinfect surfaces that are touched frequently. Order cleaning supplies. Make Notify managers when a building needs major repairs. Pick up garbage around buildings and carry garbage to dumpsters.

Huntsville, AL 35805 • (23 miles) • Full Time • 10/20/2026

IERUS specializes in technology research, testing, and implementation with core competencies in electromagnetics phenomenology, computational analytics (algorithm acceleration and machine learning), and weapon system engineering. IERUS develops value for our defense and commercial customers through accelerations of the technology life cycle: identifying, creating, transitioning, and producing technologies with integrity of purpose and product. IERUS offers competitive compensation packages, retirement options, and benefits packages. To learn more, please visit www.ierustech.com. IERUS participates in projects that address weapon systems engineering and the application of advanced machine learning (ML) and artificial intelligence (AI) techniques as well as RF/Optical hardware prototyping an

Madison, AL 35758 • (16.9 miles) • Full Time • 10/19/2026

Griffon Aerospace, a leader in the exciting Unmanned Aerial System industry, is seeking a Product Manager to lead manufacturing improvement initiatives across our UAS production lines, including process development and manufacturing automation. This role will own project execution across both internal manufacturing initiatives and external customer-facing deliverables, coordinating engineering, production, and quality functions to keep programs on schedule, on budget, and aligned to contract requirements. The growing Madison, AL based small business is seeking innovative individuals who want to join an up tempo, maker culture that proudly provides products and services to support the American Warfighter! PRIMARY PROJECT FOCUS Serve as program manager for manufacturing capacity and process

Huntsville, AL 35860 • (21.7 miles) • Full Time • 10/19/2026

Ready to launch your career? RGNext operates, maintains, and sustains mission-critical systems to provide safe and effective launch, testing, and tracking of Department of Defense, civil, commercial and international space lift vehicles. We support ballistic missile, guided weapon and aeronautical tests and evaluations as well as support space situational awareness operations and experiments to defend the United States to ensure our nation’s safety. Our employees serve on the forefront of global defense and space operations. We offer our team of experienced, professional employees an environment of challenging, stimulating and personally and professionally rewarding career opportunities. This position is located at Kwajalein Atoll in the Marshall Islands Essential Functions Perform predict

Huntsville, AL 35816 • (23.5 miles) • Full Time • 10/15/2026

Radial Solutions Inc., (RSi) is a Service-Disabled Veteran Owned Small Business (SDVOSB) located in Huntsville, AL. At RSi, we understand that people are the most important aspect of our business! As a service provider to the government, we aim to hire right people for each role. We provide professional development opportunities to support continued professional growth. We strive to foster an inclusive, welcoming, and respectful environment for every team member. RSi is looking to fill a Manufacturing Engineer position to support our NASA customer on the Marshall Engineering Technicians and Trades Support contract (METTS). This position will support developing, improving, and supporting manufacturing processes/systems, equipment, and methods to increase efficiency, quality, safety, and cos

Decatur, AL 35603 • (2.8 miles) • Full Time • $16.05 / hr • 10/11/2026

Benefits: 401(k) Dental insurance Health insurance Opportunity for advancement Paid time off Production Technician – 1st Shift Location: Decatur, AL Schedule: Monday–Thursday | 6:00 AM – 4:30 PM Pay: $16.05 per hour Join Our Team! We're looking for dependable, motivated individuals who take pride in producing quality work and enjoy being part of a supportive team. As a Production Technician , you'll play an important role in ensuring our products are packaged safely, accurately, and efficiently while maintaining the highest quality standards. If you're reliable, enjoy staying active throughout your workday, and thrive in a team-oriented environment, we'd love to hear from you! What You'll Do As a Production Technician, you'll help keep our production line running smoothly by: Stocking the

Huntsville, AL 35808 • (19.5 miles) • Full Time • 10/9/2026

Expert RF/Radar Threat Modeling Engineer Location: Huntsville, AL | Onsite Clearance Required: Minimum TS/SCI Clearence Employment Type: Full-Time Join a Growing Team at Weeghman & Briggs Weeghman & Briggs is seeking a motivated and mission-driven Expert RF/Radar Threat Modeling Engineer to support critical government initiatives in Huntsville, AL . Founded in 2016 by Anthony Jordan, Weeghman & Briggs specializes in delivering high-impact analytical services to Government Agencies and private organizations. Since our founding, we have partnered with a range of federal entities and private corporations, earning a strong reputation as a trusted, results-driven company with an exceptional team of professionals. As we continue to expand across current programs and upcoming contract awards, we

Huntsville, AL 35805 • (23 miles) • Full Time • 10/5/2026

Space Environments Engineer Are you seeking employment with a fast-growing small business who appreciates their employees? A company who believes in investing in people? JBS Solutions, Inc. is an engineering and technical logistics company in Huntsville, AL. As a company dedicated to serving the community, JBS offers the unique opportunity to enrich an underutilized area of Huntsville while growing your career through NASA and DoD contracts. From systems engineering and configuration management to technical logistics and mission operations, JBS works to solve our customers' hardest problems. With a competitive benefits package and personable work environment, JBS Solutions is the ideal company to take your career to the next level. JBS is excited to announce a new position. We are seeking

Huntsville, AL 35805 • (23 miles) • Full Time • 10/5/2026

ReLogic Research, Inc. is seeking a self-starting and highly-motivated individual to join our team! ReLogic’s central focus is to continually promote a culture that stimulates personal, professional, and intellectual growth, while developing elegant solutions to tough problems. We encourage teammates to be self-governing based on high standards of professionalism and judgement. The Senior CNC Machinist will be instrumental in maintaining and improving our quality management system to meet stringent DoD and AS9100D requirements. This position will directly impact the manufacturing quality of critical hardware produced for our Nation's defense. Primary Responsibilities Develop, write, and optimize 5-axis CNC programs for various multi-axis machining centers (e.g., Mazak, DMG Mori, Okuma, Haa

Huntsville, AL 35898 • (19.7 miles) • Full Time • $22.69 to $28.00 / hr • 9/30/2026

Overview Engineering Technician III-Instrumentation LOCATION: Huntsville, AL JOB STATUS: Full-time CLEARANCE: Secret TRAVEL: As Needed Astrion has an exciting opportunity for an Instrumentation Engineering Technician III located at Redstone Arsenal in Huntsville, AL. Astrion has worked extensively with the Missile Propulsion Test Division where it has earned a reputation for on-time delivery of high-quality products tailored to the needs of its clients. REQUIRED QUALIFICATIONS / SKILLS Must be a U.S. Citizen and have or be able to obtain a DoD security clearance. Five (5) years of applicable experience supporting engineering or testing of hardware in the appropriate area of specialization: or two (2) years of applicable college/vocational/military//technical school and three (3) years of a

Huntsville, AL 35805 • (23 miles) • Full Time • 9/26/2026

Avion Solutions Inc., a 100% employee-owned company, seeks candidates for a Turbine Engine Engineer to support Maneuver Air Directorate. This position is based in Huntsville, AL. Job Responsibilities/Duties: Provide engineering support for engine systems and subsystems relating to helicopters, unmanned air vehicles, and fixed-wing platforms. Provide written recommendations regarding field inquiries concerning serviceability of engine systems and subsystems and interpretation of airworthiness requirements. Review test plans, test reports, and analyses concerning compliance with specification and/or qualification requirements. Provide recommendations on the requirements coverage, success criteria, and acceptability of the test plans and reports, risks or potential risks of the test plan and

Huntsville, AL 35808 • (19.5 miles) • Full Time • 9/25/2026

CODEplus is currently seeking a Radiofrequency (RF) Engineer to support its operations in Huntsville, AL. Must be a U.S. Citizen Location: On-site full-time, Huntsville, AL. The candidate will provide Radio Frequency (RF) Analysis, Simulation, and Development support for space-based RF communication systems with inter-operability integration across multiple US Government Customers. This position will require active security clearance to perform daily tasks. Support customer’s Moon Base Utilities and Infrastructure Group, Deep Space Communications Network, and future RF infrastructures. The successful candidate will perform tasks such as: Provide analyses of existing transmitters, receivers, and antenna designs. Participate in requirements and data reviews providing inputs and comments. Sup

Huntsville, AL 35805 • (23 miles) • Full Time • 9/24/2026

DESE Research, Inc. is seeking a talented, motivated, and enthusiastic Mid-Level Radar Engineer/Analyst to join a well-established team in an AVMC lab that supports the development, test, and fielding of missile defense radar systems. This role focuses on analysis tool design and development, complex analysis of radar system and algorithm performance, and technical support across a broad range of missile defense radar efforts. If you are passionate about radar engineering and analysis and want to apply your skills to mission-critical defense programs supporting the U.S. warfighter, we want to hear from you! Job Details: The candidate will work as part of a well-established team supporting the development, test, and fielding of missile defense radar systems. The role includes analysis tool

Cullman, AL 35057 • (30.1 miles) • Full Time • $17.99 to $18.00 / hr • 10/3/2026

Salary: $17.99 - 18.00 per hour + none Reference: AB_5087333 Calling all ASSEMBLERS, PRODUCTION ASSEMBLERS, MANUFACTURING ASSOCIATES!Randstad has newpositions to fill ASAP in Cullman, AL! These positions are for 1st or 3rd Shifts! We are now offering 3 or 4 Day Work Weeks! We are also recruiting for Forklift Operators and Crane Operators! Work Schedules...YOU CHOOSE: Monday thru Thursday 6A-6:30P Monday thru Thursday 6P-6:30A Friday thru Sunday 6A-6:30P Job Details: You could be working in multiple areas of our facility performing basic assembly work, stacking/sorting parts, auditing/inspecting parts or operating other safe equipment. Steel toed/composite shoes are required. Work Perks: Weekly pay schedule Over-time pay rate of $27.00/hr. (if required to work over 40 hours per week) 3 or 4

Huntsville, AL 35806 • (22 miles) • Full Time • 10/20/2026

Amtec Solutions Group (ASG) is looking for talented people with a good work ethic to join our team. We offer a positive, flexible, and challenging work environment and a comprehensive benefits package including health insurance, paid time off and holidays, 401k, etc. Learn about us and apply at www.AmtecSolutionsGroup.com to join the team! Amtec Solutions Group (ASG) is headquartered in Huntsville, AL and proud to be an Alabama manufacturer offering Robotic Manufacturing Solutions, Precision CNC Machining Services, Manufactured Assemblies Integration, and the MiniTec T-Slotted Aluminum Profile System! We provide these solutions to a broad industry base of other manufacturers and service providers in Huntsville, AL and throughout the southeastern Unites States. The industries we support inc

Huntsville, AL 35824 • (14.4 miles) • Part Time • $15.00 to $18.00 / hr • 10/13/2026

Production Assembler (Non-Technical) Location: Huntsville, AL Position Status: Part-Time, Temporary Work Schedule: Part-time hours scheduled during regular business hours, Monday–Friday. Schedule may vary based on production needs. This position is on-site; remote or hybrid work is not available. Position Summary This is a part-time, temporary position responsible for performing routine, non-technical production tasks in a manufacturing environment. Duties primarily include machine-assisted marking, bagging, tagging, and packaging of parts and assemblies in accordance with established work instructions and quality standards . Employment is expected to be temporary based on business needs and does not guarantee continued or full-time employment. Duties and Responsibilities Operate marking e

Huntsville, AL 35806 • (21.3 miles) • Full Time • 10/18/2026

Description Leidos Defense Sector is seeking a talented Quality Manager for Machining Manufacturing to support commercial, aerospace, and defense manufacturing/production programs at our Alabama and Colorado locations. The position is located in Huntsville, Alabama. With offices across the United States engaging in the defense, space, cyber and commercial fields, Leidos-Dynetics provides responsive, cost-effective engineering, scientific and IT solutions. The Quality Manager for Machining Manufacturing position is responsible for implementing a Quality Control system and team that promotes customer satisfaction. The position will champion continuous improvement efforts and defect reduction initiatives to develop an effective Quality Control system for mechanical products such as machined p

Athens, AL • (14.8 miles) • Full Time • 10/10/2026

Job Title: General Production Worker Job Description This role supports high-volume automotive manufacturing by operating production machinery, performing general labor tasks, and assisting with assembly and inspection processes in a fast-paced plant environment. You will work across departments that produce gaskets, oil seals, and PTFE components, contributing to safe, efficient, and high-quality output. Responsibilities Operate various production machinery, including stamping machines, press machines, mold machines, compression machines, and other equipment used in gasket, oil seal, and PTFE manufacturing. Perform general labor tasks such as sorting, kitting, assembly, and inspection of parts to ensure products meet quality standards. Use hand tools, power tools, and tape measures accura

Hartselle, AL 35640 • (9.5 miles) • Full Time • $80,000 to $140,000 / yr • 10/9/2026

Job Title: Controls Engineer Job Description The Controls Engineer designs, programs, and supports complete automation systems for manufacturing operations, taking ownership of projects from initial concept through startup and commissioning. This role combines electrical design, PLC and robot programming, panel layout, and hands-on troubleshooting of complex equipment to improve plant performance, reliability, and safety. You will work closely with cross-functional teams and customers, leading installations and startups while ensuring systems meet technical, safety, and budget requirements. Responsibilities Design complete automation systems using AutoCAD Electrical, including power distribution, I/O control, communications, and detailed control panel layout drawings. Calculate panel short

Decatur, AL • (0 miles) • Full Time • $25.00 to $28.00 / hr • 10/4/2026

This is a 2nd shift Position - Please DO NOT APPLY if you cannot work 2nd shift!!!!! QUALIFICATIONS: · Ability to perform essential duties · High school education or GED · Minimum of five years of set-up CNC Press Brake experience · Must have working experience selecting the correct tooling for the bends required · Must have working experience in calculating and entering the axis, part offset, dimensions, angle, bend length and bend allowances Duties: · Utilizes the Production Schedule Report in due date order to produce production on schedule. Exceptions will be communicated by production control or operations manager. · Must be able to read and interpret drawings, follow routers and use math to perform calculations . · Must have a good understanding of angles and tolerances. · Must be ab

Cullman, AL 35055 • (31.8 miles) • Full Time • $22.60 / hr • 10/21/2026

Position Overview: The Extrusion Operator position is responsible for the set-up, adjustment, and operation of extrusion equipment. This job requires hands-on knowledge of setting up, troubleshooting, and maintaining a plastic pipe extrusion process. Position Responsibilities & Essential Functions: Monitor all phases of manufacturing for a PEX pipe extrusion line(s). Ensure efficient use of staff, equipment & materials throughout the process. Maintain/perform quality testing. Maintain/perform quality documentation. Training of personnel in the department. Perform a variety of manufacturing functions including machine operation, testing, and packing of products. Inspect materials and supplies to ensure compliance with customer order specifications. Must be willing and able to work any shift

Madison, AL 35758 • (16.9 miles) • Full Time • 10/19/2026

Griffon Aerospace, a leader in the Unmanned Aerial System (UAS) industry, is seeking a talented Aerial Target Mechanical Engineer to support our aerial target and unmanned aircraft product lines. Our Madison, AL based small business is seeking innovative individuals who want to join an up tempo, maker culture that proudly provides products and services to support the American Warfighter! Griffon Aerospace is seeking a motivated and detail-oriented Aerial Target Mechanical Engineer to join our engineering team in Madison, Alabama. In this role, you'll support the design, analysis, testing, and sustainment of fielded unmanned aircraft systems (UAS) and their associated ground launch systems. You will collaborate with senior engineers to ensure aircraft and launcher hardware meet performance,

Huntsville, AL 35806 • (22 miles) • Full Time • $80,000 to $100,000 / yr • 10/17/2026

Overview Dynamics Analyst LOCATION: Huntsville, AL JOB STATUS: Full-time CERTIFICATION: N/A TRAVEL: Limited; as needed Must be US citizen Astrion is seeking a Dynamics Analyst to support current and future development programs with NASA and commercial space companies. Our loads and dynamics group specializes in engineering and software services for government (NASA and DoD) and commercial applications. Astrion is a key team member supporting Marshall Space Flight Center (MSFC) in the development of the Space Launch System (SLS). We are looking for an experienced Structural Engineer to join our team supporting the development of integrated vehicle loads for the NASA SLS vehicle. This position may be eligible for a Hybrid work schedule ; part of employee’s work schedule is required to be on-

Huntsville, AL 35860 • (21.7 miles) • Full Time • 10/15/2026

RGNext employees execute and report on theater and strategic offensive and defensive ballistic missile testing and support space situational awareness operations and experiments, using a wide array of highly sophisticated radar, telemetry and optical sensors to meet the needs of our nation in defending the United States and its interests. This overseas position is located on Roi-Namur, Kwajalein Atoll in the Marshall Islands. It is an unaccompanied position (no family accommodations or pets). Benefits of this unique location include free housing, three meals a day and potential for overseas U.S. tax incentives. What You Will Do: Provide transmitter operations and maintenance support for a C-Band and Ka-Band radar system. Maintain, troubleshoot and repair various pieces of commercial and cu

Huntsville, AL 35805 • (23 miles) • Full Time • 10/13/2026

IERUS specializes in technology research, testing, and implementation with core competencies in electromagnetics phenomenology, computational analytics (algorithm acceleration and machine learning), and weapon system engineering. IERUS develops value for our defense and commercial customers through accelerations of the technology life cycle: identifying, creating, transitioning, and producing technologies with integrity of purpose and product. IERUS offers competitive compensation packages, retirement options, and benefits packages. To learn more, please visit www.ierustech.com. IERUS participates in projects that address weapon systems engineering and the application of advanced machine learning (ML) and artificial intelligence (AI) techniques as well as RF/Optical hardware prototyping an

Huntsville, AL 35808 • (19.5 miles) • Full Time • 10/9/2026

Mid-Level RF/Radar Reverse Engineer Location: Huntsville, AL | Onsite Clearance Required: Minimum TS/SCI Clearence Employment Type: Full-Time Join a Growing Team at Weeghman & Briggs Weeghman & Briggs is seeking a motivated and mission-driven Mid-Level RF/Radar Reverse Engineer to support critical government initiatives in Huntsville, AL . Founded in 2016 by Anthony Jordan, Weeghman & Briggs specializes in delivering high-impact analytical services to Government Agencies and private organizations. Since our founding, we have partnered with a range of federal entities and private corporations, earning a strong reputation as a trusted, results-driven company with an exceptional team of professionals. As we continue to expand across current programs and upcoming contract awards, we are lookin

Huntsville, AL 35802 • (25.8 miles) • Full Time • $75.00 / hr • 10/9/2026

Title: Senior Automation Engineer with Ansible Location: Woodlawn, MD Onsite: 5 Days/Week Rate: $75/hr C2C Interview: In-Person Key Requirements: Bachelor's degree and 10+ years of relevant IT experience Extensive hands-on experience with Ansible , including production-grade playbooks, roles, collections, templates, and reusable automation Strong hands-on experience with Red Hat Ansible Automation Platform (AAP) , including administration and development Strong AWS engineering experience Experience designing, provisioning, configuring, and troubleshooting AWS infrastructure Hands-on experience developing AWS CloudFormation templates and stacks Experience using Ansible or similar automation tools to provision and manage AWS resources Strong understanding of AWS infrastructure including VPCs

Decatur, AL • (0 miles) • Full Time • 10/8/2026

Production Technician Automation Personnel Services is looking for a Production Technician for a company based inDecatur,AL.In this role, you will have the opportunity toassemble, test products andmanufacturedgoodsofthe highest quality before they are marketed and sold to consumers. Pay Rate $16.05per hour Schedule and Hours Monday throughThursday,630 am to430 pm. Production Technician Duties and Responsibilities Identify defects, production issues, or process inefficiencies and communicatesolutionsto supervisors and team members. Monitor production flow to ensure products move through operations efficiently and meet quality expectations. Assemble and inspect food-grade products according to company standards and specifications. Follow allfood safety, quality assurance, and manufacturingre

Huntsville, AL 35805 • (23 miles) • Full Time • 10/5/2026

Senior Dynamics and Controls Engineer Are you seeking employment with a fast-growing small business who appreciates their employees? A company who believes in investing in people? JBS Solutions, Inc. is an engineering and technical logistics company in Huntsville, AL. As a company dedicated to serving the community, JBS offers the unique opportunity to enrich an underutilized area of Huntsville while growing your career through NASA and DoD contracts. From systems engineering and configuration management to technical logistics and mission operations, JBS works to solve our customers' hardest problems. With a competitive benefits package and personable work environment, JBS Solutions is the ideal company to take your career to the next level. JBS is excited to announce a new position. We ar

Huntsville, AL 35805 • (23 miles) • Full Time • 10/5/2026

ReLogic Research, Inc. is seeking a self-starting and highly-motivated individual to join our team! ReLogic’s central focus is to continually promote a culture that stimulates personal, professional, and intellectual growth, while developing elegant solutions to tough problems. We encourage teammates to be self-governing based on high standards of professionalism and judgement. Key Responsibilities Program, set up, and operate Mazak Integrex turn-mill platforms , including 5-axis simultaneous machining Efficiently manage and operate more than one machine at a time when appropriate, while maintaining quality and process control Own parts from programming and fixturing through prove-out, first article, and production Support quick-turn R&D and prototype efforts , including rapid iteration wi