Madison, AL • (27.8 miles) • Full Time • 9/22/2026

Summary of Job: This position is responsible for performing residential HVAC maintenance and/or service at the master level. Technician will be primarily responsible for performing installs, repairs and maintenance to a variety of equipment including: refrigeration, air conditioning, electric motors, heating units, heat pumps, compressors, furnaces, humidifiers. Education and Experience:High School diploma or equivalent GED preferred5+ years of experience in a combination of HVAC Install/ServiceEPA CertificationAble to pass a background screening and pre-employment drug testValid driver's license with a good driving recordSkills and Abilities:Understands proper operation and troubleshooting of HVAC equipment and advanced electronics of systemAble to troubleshoot and repair advanced piping

Huntsville, AL 35801 • (23.2 miles) • Full Time • 9/22/2026

D7 Pneumatics LLC is seeking a motivated and dependable Industrial Maintenance Technician to join our growing team. This position involves working at a variety of industrial facilities, including sawmills, steel mills, concrete plants, manufacturing facilities, and other industrial operations. The successful candidate will be responsible for installing, maintaining, troubleshooting, and repairing industrial equipment while providing safe, high-quality workmanship.This is a hands-on field position requiring mechanical aptitude, problem-solving skills, and the ability to work independently and as part of a team.Responsibilities Perform maintenance, repairs, and troubleshooting on industrial equipment and systems.Install, service, and repair pneumatic, hydraulic, and mechanical equipment.Diag

Huntsville, AL • (23.2 miles) • Full Time • 9/22/2026

Gillmann Services is currently recruiting for a Heavy Equipment Operator for the Huntsville/Decatur Alabama areaResponsibilitiesOperate heavy equipment including excavators, loaders, dozers, backhoes, and other construction machinery.Perform excavation, grading, trenching, backfilling, and site preparation.Load, move, and place materials safely and efficiently.Perform daily equipment inspections and report mechanical issues.Follow project plans, grades, elevations, and job-site instructions.Work safely around underground utilities, structures, vehicles, and other workers.Maintain equipment and keep the work area clean and organized.Assist with general construction duties when equipment operation is not required.Follow all company safety policies and OSHA requirements.Work effectively with

Huntsville, AL • (23.2 miles) • Full Time • 9/22/2026

NX Machine ProgrammerHuntsville, AL (Onsite) - This role is open to candidates who are willing to relocate. Our client, a leading aerospace and spaceflight organization, is seeking an experienced Machine Programmer III to support the manufacturing of advanced spaceflight hardware. This role is ideal for a highly skilled CNC/NC Programmer with strong Siemens NX and Vericut experience who enjoys working on complex, tight-tolerance components in a fast-paced manufacturing environment. This is a 4-month contract with the opportunity to convert.What You'll DoCreate and modify NC programs for CNC mills, lathes, multi-axis mills, mill-turn machines, and VTLsDevelop machining strategies to translate engineering designs into machined hardwareCreate and maintain setup sheets and manufacturing docume

Huntsville, AL • (23.2 miles) • Full Time • 9/22/2026

Automation Controls SpecialistPLC | Robotics | Industrial AutomationHuntsville, ALWe are hiring an Automation Controls Specialist to design, program, test, install, and troubleshoot industrial automation and control systems. This role supports automation projects from receipt of order through installation and requires hands-on experience with PLC and HMI programming, robotics, VFDs, servo drives, vision systems, electrical controls, and automated equipment.The Automation Controls Specialist will also provide field service support for previously installed equipment and automation systems manufactured by other companies.Responsibilities:Manage assigned automation projects from receipt of order through testing, installation, and completion.Develop electrical and pneumatic control system desig

Huntsville, AL • (23.2 miles) • Full Time • 9/22/2026

Job Title: Machine OperatorShift: 3A (Friday to Sunday 6am to 6pm)4A - Mon to Thurs 5:30am to 4pm4B - Mon to Thurs 4pm to 2:30amPay: $16/hr.Job Type: Contract to hireLocation:Huntsville, ALRoles & Responsibilities:Sets up and operates a variety of automatic or semi-automatic machinesWorks from process sheets or written instructions given by supervisor to perform production tasksChecks and inspects operation against predetermined tolerances.Follow all Company Safety and ESD Program requirements. Responsible to report all accidents, near misses, unsafe acts and unsafe conditions.Properly handle and dispose all waste, including hazardous wastes that are generated in daily operations as directed by applicable SOP(s).Requirements:Experience as a Machine Operator mandatoryHigh School or GED6 mon

Madison, AL • (27.8 miles) • Full Time • 9/22/2026

PRODUCTION TEAM MEMBER 2nd Shift - START WEDNESDAY!Madison, AlabamaPOSITION OVERVIEWNo experience required! Start Wednesday!! We are seeking reliable and motivated Production Team Members to join a fast-paced manufacturing facility in Madison, Alabama. This is an excellent opportunity for individuals who take pride in quality work and are looking for stable, long-term employment in a professional production environment.KEY RESPONSIBILITIESPerform assembly and production tasks on the manufacturing line in accordance with quality and safety standardsInspect finished products to ensure they meet specifications and quality requirementsOperate and monitor production equipment and machineryMaintain a clean, organized, and safe work area at all timesFollow standardized work instructions and produ

Decatur, AL • (33.1 miles) • Full Time • 9/22/2026

Job OverviewWe are seeking skilled Structural Welders and Fitters to join our team. The ideal candidate will be responsible for fabricating, welding, and assembling structural components with precision and adherence to safety standards. This role requires a strong understanding of welding techniques, blueprint reading, and mechanical systems to ensure high-quality construction projects.Pay range is $28/hour - $32/hour with lots of OT available! DutiesRead and interpret technical drawings, schematics, and assembly instructionsWelding structural components using the Flux-Core processRead and work from detailed blueprints, and perform 3G, and 4G welds in all positions including overhead and vertical, in high-pressure, demanding environmentUse calipers, basic math skills, and measuring tools t

Decatur, AL 35601-2417 • (33.1 miles) • Full Time • 9/22/2026

General Laborer.Decatur, Alabama.Full-time.Urgently Hiring | Weekly Pay | Overtime Available | Full Benefits | Career Growth.Earn $17.00-$19.00/hour + Overtime + Weekly Pay + Advancement Opportunities.Looking for a hands-on job with steady work, weekly pay, and opportunities to grow your career? C&H Industrial is hiring General Laborers to join our team! Whether you have experience in warehouse, construction, manufacturing, landscaping, or general labor, we'll provide the experience you need to build a long-term career in industrial services.What's In It for You?:Competitive Pay: $17.00-$19.00/hour based on experience.Weekly Pay.Overtime Opportunities.Full Medical, Dental & Vision Benefits.Life & Disability Insurance.Health Savings Account (HSA) & Flexible Spending Accounts (FSA).Paid Care

Decatur, AL • (33.1 miles) • Full Time • 9/22/2026

ELECTRO MECHANIC MAINTENANCE TECHNICIANThis is a first shift position. Pay will be based upon skill level and experience.Seeking an experienced maintenance employee who has a minimum of 8 years’ experience in trouble shooting and repairing plant equipment. Mechanical experience is a must and 480 electrical is required.The standard shift will be Monday - Friday, working from 7:00 a.m. until 3:30 p.m. Overtime is available on an as needed basis.Candidates must be self-starters, dependable and someone that can be trusted to work when no one is looking. Must have a valid driver’s license and be able to pass a drug screen and background check.Qualifications: - MUST MEET ALL QUALIFICATIONS TO BE CONSIDERED* Ability to perform essential duties* High school diploma or equivalent* Minimum of 8 year

Athens, AL 35613 • (38.1 miles) • Full Time • 9/21/2026

Now hiring a Service Technician.Duties will be basic service, (brakes, tires, oil changes and general maintenance.)Must have a clean driving recordMust be 21 years old.Monday - Friday and sometimes on SaturdayFULL-TIME POSITIONWe officer paid PTO, Blue Cross Blue Shield health and dental. Beam visionFree lunch on Friday.Voted one of the BEST PLACES TO WORK IN ATHENS AL.

Huntsville, AL 35801 • (23.2 miles) • Full Time • 9/21/2026

Will work 100% onsite in Huntsville AL.Must reside in the local area to be connsidered.Description• Network equipment experience• Fiber knowledge• Fiber troubleshootingLayout and install wireway, buss duct, cable tray, switches receptacles and other devicesWill build closets (Mount and install backboards, cross connects, racks, patch panels, fiber optic and hardware).Install grounding for racks, equipment and cable as required.Complete all IDC connections (e.g. terminate 110/66 blocks and patch panels).Looking for individuals that can work inside and outside building out the data centers.Pulls wire and/or oversees and directs conduit installations and wire pulling.Operates tools/equipment, normally requiring the use of two hands (examples: cable cutters, hammer drills, compression tools, j

Huntsville, AL 35808 • (19.8 miles) • Full Time • 9/20/2026

CODE Plus, Inc.,an experienced IT government contractor in Fairfax, VA with offices in Huntsville, AL and have been in business for 31 years and have been servicing different agencies within the Federal sector. Our mission is to deliver high-quality, cost-effective solutions that empower our clients to achieve their goals. At CODEplus, we value teamwork, integrity, and technical excellence, and we pride ourselves on maintaining long-standing partnerships built on trust and results.CODEplus is currently seeking Senior Composite Engineer SME to support our operations in Huntsville, AL.Position OverviewThis role supports composite structures design, analysis, and manufacturing for NASA Marshall Space Flight Center (MSFC) programs. The engineer will work on composite components for launch vehi

Hartselle, AL 35640 • (28.3 miles) • Full Time • 9/20/2026

About the Role: Join Tennessee Valley Land and Environment as a Local Dump Truck Driver on the Night Shift! We are looking for dedicated individuals to help transport materials safely and efficiently in Hartselle, AL. Responsibilities:Operate dump truck to transport materials to and from job sitesEnsure compliance with all safety regulations and policiesPerform pre-trip and post-trip inspections on the vehicleMaintain accurate logs of hours worked and materials transportedCommunicate effectively with dispatch and site personnelAssist in loading and unloading materials as neededAdhere to scheduled routes and timelinesReport any vehicle issues or accidents immediatelyRequirements:Valid CDL license with a clean driving recordPrevious experience driving dump trucks preferredStrong knowledge of

Arab, AL 35016 • (6.2 miles) • Full Time • 9/20/2026

Build the Future with Us Forge & Build is Hiring a Yard AssociateAt EquipmentShare, we’re not just filling a role we’re assembling the best team on the planet to build something that’s never been built before. We’re on a mission to transform an industry that’s been stuck in the past by empowering contractors and communities through innovative technology, real-time support, and a team that truly cares.Forge & Build is hiring aYard Associate at our facility in Arab, AL, and we’re looking for someone who’s ready to grow with us, bring energy and drive to their work, and help us build the future of construction.The Yard Associate is responsible for maintaining daily yard operations and standards, ensuring an excellent customer experience while upholding safety standards throughout the yard at

Baileyton, AL 35019 • (12.9 miles) • Full Time • 9/20/2026

OverviewSeeking a reliable and hard-working Maintenance Mechanic to join our dynamic team. In this role, you will be the backbone of the factory floor. Your primary objective is to keep automated production lines, machinery, and plant infrastructure running efficiently to minimize manufacturing downtime.ResponsibilitiesEmergency & Reactive Repairs: Respond rapidly to assembly line breakdowns. Diagnose mechanical, pneumatic, or hydraulic failures under strict time constraints to restore production.Preventive & Predictive Maintenance: Execute scheduled inspections, alignment checks, and machinery tuning. “Perform preventive maintenance on production equipment to extend equipment life and reduce unexpected failures.Tooling & Fabrication: When a replacement component is unavailable, mechanics

Huntsville, AL 35811 • (27.6 miles) • Full Time • 9/20/2026

Benefits:Overtime availableYear-round employmentCompetitive salaryOpportunity for advancementPaid time offOutdoor Laborer - Landscaping Veteran's Lawn Care | Huntsville, AL Veteran's Lawn Care is growing and looking for dependable Outdoor Laborers to join our landscaping team. If you enjoy physical work, take pride in a job well done, and like working outside instead of behind a desk, this could be the opportunity for you. No landscaping experience? No problem. We provide training for individuals who are eager to learn and build long-term careers. Responsibilities: Assist with landscape installation projects for residential and commercial propertiesSpread mulch, install plants, shrubs, and sodPerform edging, trimming, pruning, and general landscape maintenanceMove materials and equipment t

Albertville, AL 35950 • (14.9 miles) • Full Time • 9/19/2026

General LaborerAlbertville, AlabamaCompany Overview:Ajax Tocco Magnethermic (ATM), a subsidiary of ParkOhio, traces its roots back to the 1800s and has a rich history of excellence in induction heating and melting solutions. The present company was formed in 1959 when the Magnethermic Corporation acquired the assets of Ajax Electrothermic Corp. combining their expertise and capabilities.Position Summary:The General Laborer supports the assembly, fabrication, and production of industrial equipment in a manufacturing environment. This entry-level position provides hands-on training in mechanical assembly, basic electrical systems, material handling, and equipment preparation. The role assists with building and assembling components from schematics and blueprints, preparing and finishing sub-

Huntsville, AL 35816 • (25.5 miles) • Full Time • 9/19/2026

Pay: Hourly Base Rate + Performance Commission (Estimated $4,000 - $7,000/mo.)Job Type: Full-timeJob DescriptionWe are seeking a skilled and dedicated Appliance Technician to join our team as a W-2 employee. The ideal candidate will possess a strong mechanical aptitude and a drive to provide top-notch, in-home service to our customers. With our compensation structure combining a guaranteed minimum hourly rate with performance-based commissions, you will enjoy both the stability of a reliable income and the opportunity to significantly increase your earnings based on your hard work.Company OverviewUS In Home Services is a premier Home Appliance Service Center. We are a for-profit corporation registered and operating across Alabama, Arkansas, Florida, Georgia, Kentucky, Louisiana, Mississipp

Madison, AL • (27.8 miles) • Full Time • 9/19/2026

Chipton-Ross is seeking multiple Assembler 2's for a contract opportunity in Madison, AL.BASIC QUALIFICATIONS (REQUIRED SKILLS/EXPERIENCE):• High school diploma and minimum of 2 years of related assembly experience.• Experience with soldering (J-Standard certification preferred), surface mount (SMT) packages, or wire harness construction.• Ability to work from complex engineering drawings, blueprints, and, or, work instructions.• Experience working with microscopes for precision assembly.POSITION RESPONSIBILITIES:• Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables. • Works from diagrams and drawings, makes initial layou

Decatur, AL • (33.1 miles) • Full Time • 9/19/2026

Full time mobile crane/boom truck operator. Current NCCER or NCCCO crane certification. Required to pass an observed drug/alcohol screen and required background for various locations.

Huntsville, AL 35803 • (12 miles) • Full Time • 9/19/2026

Salary: $16 - 20 per hour + none Reference: AB_5059667 We are seeking a detail-oriented and technically skilled Complex Test Operator to join our team. In this role, you will set up and operate advanced test equipment, perform functional and electrical testing, interpret technical drawings and test procedures, document results, and troubleshoot test failures. The ideal candidate has mechanical or electrical aptitude, excellent attention to detail, and the ability to follow technical instructions and safety procedures. Experience with automated test equipment, electronic systems, precision measurement tools, or manufacturing environments is highly valued. Join our team and help ensure our products consistently meet rigorous quality and performance standards.salary: $16 - $20 per hour shift:

Huntsville, AL • (23.2 miles) • Full Time • 9/19/2026

Senior Electronics Manufacturing Engineer to drive electronics manufacturing, design for manufacturability (DFM/DFMA), production readiness, and scalable factory design across multiple sUAS platforms. This role partners with Design Engineering, Quality, Supply Chain, and Operations to lead DFM/DFMA, Design for Test (DFT), New Product Introduction (NPI) industrialization, tooling and fixturing, built-in quality, capacity planning, manufacturing automation, and factory/line layout optimization for high-volume manufacturing. The role will improve throughput, cost, quality, safety, and production scalability across complex electrical and electromechanical systems.Responsibilities – What You’ll DoCollaborate with Design Engineering to provide DFM/DFMA and DFT input from concept through producti

Athens, AL • (38.9 miles) • Full Time • 9/19/2026

Manufacturing Assistant Manager - 1st Shift (Starts at 6:30am)Organization: TBAKI Location: Athens, ALJob SummaryAs the Manufacturing Assistant Manager, you will be a first-line supervisor directing Group Leaders, Team Leaders, and Team Members in your assigned manufacturing area (such as seat assembly, welding, or kitting). You will be responsible for managing your group as an operational unit, driving the team to meet company goals for safety, product quality, productivity, and cost reduction. You will lead the manufacturing and production system for your area and work to develop positive team member relations centered on mutual trust, respect, and teamwork.What You'll DoLeadership & Team DevelopmentFunction as a first-line supervisor over Group Leaders, Team Leaders, and Team Members.Pl

Huntsville, AL 35816 • (25.5 miles) • Full Time • 9/18/2026

Fence Installer Kowboy Fence CompanyAbout the Role Kowboy Fence Company is looking for a hands-on Fence Installer to join our in-house crew. You'll be building and installing residential and commercial fencing wood, chain link, ornamental, and vinyl working directly for Kowboy rather than through a subcontractor. If you take pride in clean, solid work and want steady, reliable hours with a crew that's got your back, we want to hear from you.What You'll DoInstall fencing according to project specs and site plans (wood, chain link, ornamental/aluminum, vinyl, and gate systems)Read and follow layout plans, property lines, and permit requirementsDig post holes, set posts in concrete, and ensure proper alignment, spacing, and gradeOperate hand tools and power equipment (augers, post drivers, sa

Decatur, AL 35601 • (34.8 miles) • Full Time • 9/18/2026

Department: EngineeringJob title: Electrical EngineerReports to (title): Engineering SuperintendentExempt Non-supervisory General Description:Routinely monitors unit instrument and electrical equipment with respect to safe and reliable operations. Engineer determines the cause of equipment failures, recommends and implements corrective actions; oversees repairs and modifications Engineer recommends and implements improvements for reduced risk, increased system reliability, and reduced operating and maintenance costs through procedures, processes, and project design at their assigned unit or area. Engineer will also provide assistance to Maintenance and Operations on longer term issues and on issues that are significant unit cost drivers.Roles and ResponsibilitiesProvides technical support

Huntsville, AL 35803 • (12 miles) • Full Time • 9/18/2026

4A - 5:30AM - 4:00PM Monday - Thursday 4B - 3:30PM - 2:00AM Monday - Thursday 3A - 6:00AM - 6:00PM Friday - Sunday (paid for 40 hours) Job OverviewWe are seeking a motivated and detail-oriented Conformal Coating Operator to join our manufacturing team. In this vital role, you will be responsible for applying protective conformal coatings to electronic components and assemblies, ensuring they meet strict quality standards and durability requirements. Your expertise will help safeguard products from environmental damage, improve longevity, and enhance overall product performance. This position offers an exciting opportunity to work in a dynamic production environment where precision, safety, and quality are paramount.DutiesOperate coating equipment, including spray guns and airless paint spr

Huntsville, AL • (23.2 miles) • Full Time • 9/18/2026

MAINTENANCE FLOOR TECH. Automation Personnel Services is seeking a dependableMaintenance Floor Technicianfor a company based in Huntsville, AL. In this role, you will have the opportunity to build your skills in facility maintenance while supporting daily operations and helping keep a professional work environment safe, clean, and fully functional. Pay Rate $15:00 and up Based on experience Schedule and Hours 7:00PM –3:30AM Must be able to be scheduled any day of the week (including weekends) Maintenance FloorDuties and Responsibilities • Perform routine floor maintenance, including stripping, waxing, buffing, and polishing floors. •Clean and maintain floors, hallways, common areas, and other assigned facility spaces. •Operate floor-care equipment such as buffers, auto scrubbers, floor mac

Hartselle, AL 35640 • (28.3 miles) • Full Time • 9/18/2026

Benefits:401(k)401(k) matchingBonus based on performanceHealth insurancePaid time off Do you prefer to work outdoors instead of in an office? Enjoy working independently? Are you looking for growth opportunities? If so, come work as a Lawn Care Technician at the Lawn Doctor of Madison-Decatur. Lawn Doctor of Madison-Decatur is looking for capable, dependable and caring individuals dedicated to providing high-quality, customer-focused lawn care services to join our team as Lawn Care Technicians. Benefits and Perks: Competitive wages + Commission Top Rated Company Benefits are Available Work Outdoors / Independently Growth Opportunities Great Company Culture No experience necessary Paid Holidays/Vacation Paid Training Medical Insurance Dental Insurance Vision Insurance Daily Tasks include: F

Owens Cross Roads, AL • (12.6 miles) • Full Time • 9/18/2026

Mavis Tires & Brakes at Discount Prices - Automotive MechanicsPut your career into high gear with Mavis Tires & Brakes at Discount Prices! We're looking for full-time Automotive Mechanics to join Team Mavis at one of our state-of-the-art automotive service, repair, and tire sales centers in the Owens Cross Rd, AL area. With over 2,000 retail locations, Mavis is one of the largest tire sales and automotive repair chains in the United States.About the Position of Automotive MechanicAs Mavis's leaders in undercar repairs, our Automotive Mechanics are trusted to inspect, diagnose, and perform a wide variety of automotive services on customers' vehicles. Mavis's Automotive Mechanics perform a wide variety of undercar repairs, including brakes, struts, and shocks. Automotive Mechanics are also r

Huntsville, AL • (23.2 miles) • Full Time • 9/18/2026

Join Tarkett, a global leader in innovation flooring solutions and sports surfaces. We believe our entrepreneurial culture is what differentiates us from the competition. So if you've got what it takes, we invite you to CHANGE THE GAME WITH US!POSITION SUMMARY: Tarkett is seeking a Senior Process Engineer to join the project team in Florence, Alabama. This position reports directly to the Engineering Manager and will be responsible for planning, designing, and implementing safe, repeatable manufacturing processes. This position will work in collaboration with the operations team to ensure that a quality product is delivered to the customers safely and on time.ESSENTIAL DUTIES & RESPONSIBILITIESLead projects from concept to industrialization.Partner with EHS to ensure equipment, machines an

Huntsville, AL • (23.2 miles) • Full Time • 9/18/2026

MIG Welder – 1st Shift & 2nd Shift$22.00/hour | Temp-to-HireLocation: USA Parkway, Sparks, NV 894371st Shift: Monday–Friday | 6:00 AM – 2:30 PM2nd Shift: Monday–Friday | 12:00 PM – 8:30 PMStart Your Welding Career with a Leading Company!CloudRay, a trusted staffing partner with 25+ years of experience, is hiring MIG Welders for a reputable client in Sparks, NV. This is a great temp-to-hire opportunity with long-term growth potential.Position OverviewAs a MIG Welder, you will perform welding and assembly operations while ensuring all work meets quality standards, specifications, and safety requirements.Key ResponsibilitiesRead and interpret blueprints, drawings, and work instructionsPerform MIG welding on sheet metal (including 10-gauge)Complete product and final assembly tasksMaintain weld

Huntsville, AL 35806 • (28.5 miles) • Full Time • 9/18/2026

Talascend is currently seeking aMechanical Assembler for a contract opportunity located in Huntsville, AL. Responsibilities:Build, troubleshoot, and repair cable assemblies.Working knowledge and use of tools used for cable manufacturing (strippers, crimpers, solder iron).Interpret engineer drawings, electrical schematics, and technical specifications.Candidates must have experience working with design engineers, manufacturing engineers, and other technicians to develop a strategy and identify any problems that could occur during assembly.Perform basic troubleshooting to find faults in signal and connectivity issues.Basic Qualifications:Candidates must possess a High School diploma/GED with 1 to 3 years (or more) of experience with cable building and/orelectrical/mechanical assembly experie

Athens, AL 35611 • (44 miles) • Full Time • 9/18/2026

Position Title: Pipe LaborerDepartment: PipeSupervisor: Utility SuperintendentLocation: North AlabamaEssential Job Functions:Work on the bank for a utility crew helping gather materials and toolsUse various hand and power tools to accomplish tasksLearn to install Underground Utilities including water, storm, sewer, and electricWilling and able to operate heavy construction equipment as neededLocate, measure and mark site locations or placement of structures or equipmentWork within precise limits and standards of accuracyMaintain a high level of quality work at all timesMaintain good relationships with Technicians, Foreman, Superintendents, Inspectors, Developers, and other co-workers at all timesFollow all safety rules and regulations while performing work tasksPerform other duties as assi

Fort Payne, AL • (43 miles) • Full Time • 9/17/2026

What You will Do:Support the supervisor in managing a team of hourly employees on work assignments.Supportcoachingandmentoringteam members to grow with assigned work experience.Execute jobs priorities with the planning and technical support team.Identify issues with product flow and resolve with the assistance of the technical support team.Support supervisor to manage Productivity of the hourly team to ensure product movement and schedule requirements.Ensuremanufacturingprocesses are clearly defined and communicated frommanufacturing engineeringto the shop floor via technical instructions, project briefings, etc.Providetechnical guidanceand training to operators, technicians, andmanufacturingengineers on the use of fixtures, tooling, and equipment.Support OIL documentationWhat You Will Bri

Huntsville, AL • (23.2 miles) • Full Time • 9/17/2026

Join Our Team as an HVAC/EPA Certified Apartment Maintenance TechnicianLocation:Huntsville, AlabamaAre you an experiencedApartment Maintenance Technician with HVAC/EPA certificationlooking for your next opportunity? Do you know your way around HVAC systems, plumbing, electrical repairs, and apartment turns? We’re looking for skilled maintenance professionals who are ready to put their expertise to work and keep apartment communities running smoothly!If you’re dependable, hands-on, and take pride in keeping properties in top shape, we’d love to have you on our team!What You’ll Be DoingAs an Apartment Maintenance Technician, you’ll be responsible for:HVAC Repairs & Maintenance:Diagnose, repair, and maintain HVAC systems throughout the apartment community.EPA/HVAC Compliance:Utilize your EPA

Huntsville, AL • (23.2 miles) • Full Time • 9/17/2026

**Job is located in Huntsville, Alabama***Paul Davis Restoration of Huntsville is part of a National Franchise Organization that provides services to cleanup and repair damage to institutional, commercial, and residential properties due to fire, water, mold, storm or other disasters. Paul Davis is based around a can-do attitude and thrives on innovation and excellent customer service. The Paul Davis Franchise Network focuses on offering services in communities,towns, and cities across the US, and creating a synergy of experience, excellence, and expertise that is second to none. Our passion for quality drives everything we do.Responsibilities:The estimator will use multiple software programs such as Xactimate and Symbility to sketch and type up property claims on and off site.Duties: Handl

Huntsville, AL • (23.2 miles) • Full Time • 9/16/2026

Location:Alabama (Huntsville, Madison, Birmingham, Montgomery and surrounding project locations)Schedule:Day and night shifts available. Overtime and extended workweeks available based on project demands.Job SummaryWe are seeking Fiber Technicians to support large-scale data center construction projects throughout Alabama. This role is responsible for installing, terminating, testing, troubleshooting, and documenting fiber optic infrastructure within hyperscale and mission-critical environments.The ideal candidate has experience working with fiber optic cable, structured cabling systems, telecommunications infrastructure, or data center environments and is comfortable working on active construction sites with aggressive project schedules.ResponsibilitiesInstall, route, and secure fiber opt

Huntsville, AL 35806 • (28.5 miles) • Full Time • 9/16/2026

Residential HVAC System Installer / Lead InstallerBuild Your Career with Conditioned Air SolutionsReady to bring your craftsmanship to a team that rewards hard work? Conditioned Air Solutions is expanding, and we are looking for dedicated Residential HVAC Installers who take pride in clean, precise installations. We operate on integrity, back our team with top-tier training, and provide a clear roadmap to your next promotion and raise.What’s In It For You:Sign-On Bonus: Up to $10,000 available for experienced, qualified lead installers.Earnings Boost: Competitive base pay plus commission opportunities.Equipment & Support: Fully equipped company installation vehicle, modern tablets/iPhones, and fully integrated scheduling software.Full Benefits: Immediate 401(k) with a fully vested company

Huntsville, AL 35806 • (28.5 miles) • Full Time • 9/16/2026

Axion Corporation is seeking an experienced CNC Machinist / Programmer to join our manufacturing team in Huntsville. We're looking for a hands-on machinist who can do more than run a machine someone comfortable programming, setting up, troubleshooting, and running CNC equipment, and taking a part from print to finished product. Experience with Haas machines and controls is strongly preferred.What You'll DoProgram, set up, and operate our Haas machining centers UMC-750 (5-axis) and VF-series (any model), 3- and 5-axisWrite and edit programs from engineering drawings and 3D models; program and/or operate Fanuc controlsRead and interpret blueprints, engineering drawings, and specifications (including GD&T)Determine appropriate tooling, speeds, feeds, and machining processesPerform setups, pro

Guntersville, AL 35976 • (7.8 miles) • Full Time • 9/15/2026

Job Title: UH-60 Avionics Technician If interested & qualified, reach out to Kaitlin Healy at 843/830/9386Location: Guntersville, AL (40 mins east of Huntsville)Job DescriptionWe are seeking skilled Avionics Technicians to join our team and support our BEST program by performing phase maintenance and modification/installation on UH-60 helicopters. The role involves installing glass cockpits and autopilot systems to ensure the highest standards of aviation excellence.ResponsibilitiesInstall Garmin into cockpits of UH-60 helicopters.Conduct modification and installation tasks on avionics systems.Install glass cockpits and autopilot systems.Ensure all work is completed to aviation standards.Essential SkillsMinimum of 5 years experience in avionics modification and installation.Proficiency in