Aberdeen, MS 39730 • (26.3 miles) • Full Time • $20.00 to $28.00 / hr • 10/17/2026

Positions available are as follows: Above Ground Electrical, Below Ground Electrical, Mechanical/Metal, Operator (Earth, Skid, Forklift), PV. General Job Title(s): Helper/Millwright/QC Classification: HOURLY/Non-Exempt Department: Solar Location: SolarJobsites Title Reports To: Relevant Field Supervisor Approved By: JIMMY LEE 1 /4/2022 GENERAL POSITION SUMMARY: ProvidevariousgenerallabordutiesinthefieldonSolarJobsiteprojects,includingbutnot limitedto:PVInstaller,Helper,GeneralLabor,QualityControl GENERALESSENTIALDUTIES&RESPONSIBILITIES: Workoffladdersandscaffolding Operatehandtoolsincluding,butnotlimitedto: Tapemeasure,wrenches,hammers,drills,rivetguns,shovels,grinders, andrakes Goodorganization,communication, andinterpersonalskills Abilitytoconvey apositiveandprofessionalimagetoco-workers

West Point, MS 39773 • (33.3 miles) • Full Time • $26.50 to $28.50 / hr • 10/17/2026

Job Summary Welds military and commercial vehicles on an Assembly line using the Gas Metal Arc Welding (GMAW) and or both Flux Cored Arc Welding (FCAW) processes according to specifications and following all safety regulations. In this role, the welder will be expected tojoin, fabricate, and repair metal and other weldable materials by applying appropriate techniques and using various welding devices. Responsibilities Welds and assembles metal pieces and products by using handheld welding equipment Sets upwelding machines andparts for welding; uses hand tools, clamps,jigs,and fixtures Works from specifications,follows work instructions, understands basic weld symbols Prepares and completes work on materials by welding, cutting,grinding,and cleaning metal Ensures sufficient materialsare ava

Fayette, AL 35555 • (17.9 miles) • Full Time • $14.00 / hr • 10/15/2026

Duties: Using jib crane, overhead crane, slings or manual lifting, grinder, buffer, chipping hammer, scraper, and dye grinder move components into proper position at machine. Perform maintenance activities as required for specific machines. As a condition of employment, work all assigned days and overtime as required. Must wear all PPE required. Manually remove all excess weld splatter that the blaster does not get off. Grind any knots. Install boards on dump body. Assist paint department in prepping/sanding dump bodies. Perform 5S daily. Qualifications: Educational : High School Diploma or GED. Experience : No relevant experience required, training is provided. Other : Must be able to lift and carry up to 50 lbs. Must be able to climb onto chassis. Must be able to stand for 10 hours. Must

Columbus, MS 39701 • (33 miles) • Full Time • 10/13/2026

Description: Core Industrial Maintenance is looking for an experienced Millwright to join our talented team of skilled tradespeople. We are looking for someone that understands inspecting, repairing, and maintaining industrial machinery. This position will require the millwright to work in a variety of environments and frequent travel to customer sites. Disassemble and reassemble equipment for repair or transportation. Build the foundation for machines. Construct and install equipment such as shafting, conveyors and tram rails. Review and interpret engineering specifications, schematics, and blueprints to determine work procedures. Transfer equipment to the applicable site for maintenance to avoid contamination or safety hazards. Grind and file machinery parts. Supervise construction worke

Columbus, MS • (24.2 miles) • Full Time • 10/9/2026

Commercial HVAC Service Technician Columbus, MS | $25–$40/hour DOE | Weekly Pay Commercial HVAC. Real Troubleshooting. No Residential Work. D&L LLC is hiring an experienced Commercial HVAC Service Technician to join our team in Columbus, MS . If you know your way around commercial HVAC equipment, enjoy troubleshooting problems, and take pride in keeping customer systems running reliably, we want to hear from you! This is a full-time, long-term opportunity focused exclusively on commercial and industrial HVAC serviceno residential work! If you’re a skilled HVAC technician looking for challenging work, steady hours, and a better work-life balance, we’d love to have you join the D&L team. Responsibilities Service, troubleshoot, repair, and maintain commercial and industrial HVAC equipment Dia

Columbus, MS 39702 • (25.8 miles) • Full Time • 10/9/2026

Heavy Equipment Operator Columbus, MS Burns Group is a family-owned business, established in 1977 serving the civil construction and aggregates industry in the Southeast. Our portfolio includes heavy civil, logistics, and recycling divisions. Our core values and dedication to our people guide every aspect of our company. We invite you to contact us and see what it means to be #burnsbuilt. Ideal Candidate Requires at least two years experience of the following responsibilities: Equipment Operation Operate heavy equipment used in underground utility construction, including but not limited to: Excavators Backhoes Loaders and skid steers Rollers and trench compactors Dig trench to the correct line, depth, and grade for water, sewer, and storm drain pipe Set pipe, manholes, inlets, boxes, and o

Starkville, MS 39762 • (44.8 miles) • Full Time • 10/9/2026

MOST ELECTRICIANS JUST WANT A JOB. WE'RE LOOKING FOR SOMEONE WHO WANTS A CAREER. 30+ Years in Business 300+ Team Members100+Fleet Vehicles $25–$37Pay Range If you’re reading this, you’re probably good at your trade. Maybe you’re good at it and underpaid. Maybe you’re good at it and stuck working for a company that doesn’t notice. Maybe you’re ready for something bigger, maybe you’re loyal to a fault. Here’s what we’re offering: large-scale commercial ground-up construction, real career advancement, and a company that has been building Tuscaloosa, Alabama since 1992 and isn’t slowing down. WHAT’S IN IT FOR YOU $25–$37/hr DOE ask us what DOE means for someone with your background Paid vacation and holidays Full benefits package inclusive of Healthcare, Dental, & Vision. 401(k) with Matching

Haleyville, AL • (43.4 miles) • Full Time • 10/7/2026

Job Title: Welder Job Description This role focuses on welding and assembling trailer components according to detailed engineering specifications. You will perform MIG welding on steel and aluminum parts in flat and vertical positions, working from blueprints, weld symbols, and precise measurements to ensure strong, accurate, and highquality welds throughout the trailer structure. Responsibilities Weld all required parts and joints of trailers in accordance with engineering specifications and quality standards. Perform MIG welding on steel and aluminum trailer components in flat and vertical positions. Read and interpret blueprints, weld symbols, and engineering drawings to determine weld locations and requirements. Accurately use a tape measure and basic math skills to verify dimensions,

Sulligent, AL • (9.2 miles) • Full Time • 9/29/2026

Value Engineer - Up to $90K/annuallyDOE! This position is a direct hire opportunity! Integrity Trade Services ishiring a ValueEngineer for ourmanufacturing clientto start immediately upto $90K/annually DOE!Receive comprehensive benefits through our clientupon hire! Responsibilities: The Value Engineer prepares accurate product quotations and provides technical design assistance for standard and custom-engineered products. This position connects Sales, Engineering, Manufacturing, Procurement, Supply Chain, and Product Management by converting customer requirements into practical, cost-effective, and manufacturable solutions. Review customer specifications, engineering drawings, product configurations, and application requirements to develop accurate quotations. Evaluate materials, labor, pr

Columbus, MS • (24.2 miles) • Full Time • 9/27/2026

PLUMBER Columbus, MS This is a hybrid service-and-install role for a plumber who wants steady call volume, real commission, and a company that invests in tools and training rather than nickel-and-diming you for them. If you're strong on drain clearing and want to grow with a team that's actively rebuilding its bench, this is worth a look. THE BASICS Location: Columbus, MS Pay: $25–$30/hr base + commission (3% on service tickets; 4–6% tiered on system installs; first month's payment on service plans) Schedule: 7:15 AM arrival, work starts 7:30 AM. Typical end time 4:00–5:00 PM usually 4:00 PM off-season, can run 5:00–6:00 PM during peak. Half-day Sundays available for those who want to attend church, starting around 12:00 PM. On-Call: Rotating on-call schedule; last call taken by 8:00 PM. W

West Point, MS 39773 • (33.3 miles) • Full Time • $32.00 to $33.00 / hr • 10/17/2026

The Weld Supervisor leads a team of welders in a defense manufacturing environment, overseeing daily production operations to ensure work is completed safely, on schedule, and in full compliance with engineering specifications, weld procedure standards, and quality system requirements. This role is responsible for workforce planning, hands-on technical guidance, first-article and in-process inspection support, and driving continuous improvement on the production floor. Responsibilities Directly supervise a team of welders performing MIG, TIG, stick, and/or flux-core welding operations on defense and commercial production programs. Coordinate material staging, tooling, fixtures, and jig availability so welders can maintain uninterrupted workflow. Verify that all weld operations are performe

Columbus, MS 39701 • (33 miles) • Full Time • 10/13/2026

Description: Core Industrial Maintenance is looking for an experienced Pipefitter to join our talented team of skilled tradespeople. We are looking for someone that understands laying, assembling, maintaining, and repairing industrial piping systems and pipe supports. This position will require the Pipefitter to work in a variety of environments and frequent travel to customer sites. • Read and understand plans and documentation to determine the scope of work, locations, quantities, and sizes of materials required • Layout, fabricate, and install pipe spools from spool sheets • Flame cut pipe to length and bevel, clean and prepare pipe for fit-up • Performs layout, rigging and transportation of pipe, valves and fittings • Threads pipe using threading machine • Bends pipe by hand or with pi

Okolona, MS • (40.1 miles) • Full Time • 10/12/2026

Position: General Labor Pay: $14.00/hour Shift: 6:00 AM - 2:30 PM Location: Okolona, MS/ Tupelo, MS Integrity Trade Services is hiring a General Labor to start IMMEDIATELY at $14.00/hour. Receive comprehensive benefits through ITS upon hire! Responsibilities Fill product and stack off boxes Work closely with supervisors to ensure smooth operations Safely lift and move items weighing up to 50 pounds daily Assist with inventory management Maintain a clean and organized workspace Qualifications Previous manufacturing experience preferred Ability to work independently and efficiently Strong attention to detail and organizational skills High school diploma or equivalent required Ability to lift up to 50 pounds regularly Skills Assembly and manufacturing experience Inventory management Quality i

Fayette, AL 35555 • (17.9 miles) • Full Time • 10/7/2026

MIG Welder We are seeking an experienced MIG Welder to join our manufacturing team building and repairing heavy-duty dump bodies and truck equipment. The ideal candidate will have proven experience welding abrasion-resistant (AR) materials , interpreting fabrication drawings, and producing high-quality welds that meet company and industry standards. This position requires strong attention to detail, knowledge of heavy-duty truck body construction, and the ability to work safely in a fast-paced manufacturing environment. Essential Duties and Responsibilities Perform MIG welding on dump body assemblies, subassemblies, and components. Weld abrasion-resistant (AR) materials and structural steel used in dump body construction. Read and interpret blueprints, welding symbols, fabrication drawings

Columbus, MS 39702 • (25.8 miles) • Full Time • 10/5/2026

Front Load Driver Location: Golden Triangle area (North Mississippi) Company: Burns Waste Burns Group is a family-owned business, established in 1977, serving the civil construction and aggregates industry across the Southeast. Our portfolio includes heavy civil, logistics, and recycling divisions. Our core values and dedication to our people guide everything we do. Come see what it means to be #burnsbuilt. THE JOB Burns Waste is hiring a Front Load Driver responsible for the safe and efficient operation of front load trucks to service commercial and construction customers. This role plays a key part in keeping operations running smoothly by ensuring timely pickups, safe transport, and professional customer interaction. This position requires a strong focus on safety, reliability, and cust

Columbus, MS • (24.2 miles) • Full Time • 9/27/2026

HVAC TECHNICIAN Columbus, MS Join a growing HVAC company where 3 focused calls a day (not 4) means real time for full system diagnoses not rushed patch jobs. This is a shop that pays for your training, funds your tools, and rewards you for doing the job right with real commission on top of a strong base. THE BASICS Location: Columbus, MS Pay: $25–$30/hr base + commission (3% on service tickets; 4–6% tiered on system installs; first month's payment on service plans) Schedule: 7:15 AM arrival, work starts 7:30 AM. Typical end time 4:00–5:00 PM usually 4:00 PM off-season, can run 5:00–6:00 PM during peak. Half-day Sundays available for those who want to attend church, starting around 12:00 PM. On-Call: Rotating on-call schedule; last call taken by 8:00 PM. Weekend work limited to emergencies

Columbus, MS 39701 • (33 miles) • Full Time • 10/13/2026

Description: Core Industrial Maintenance is looking for an experienced TIG Welder to join our talented team of skilled tradespeople. We are looking for someone that understands multiple different types of welding techniques and proper applications of those skills in an industrial setting. This position will require the Welder to work in a variety of environments and frequent travel to customer sites. - Perform welding and soldering tasks to join metal components together - Read and interpret blueprints to determine welding specifications - Assemble and fabricate metal structures using various welding techniques - Use rigging equipment and cranes to position and secure large metal pieces - Perform pipe threading and welding for plumbing and construction projects - Conduct inspections of wel

Columbus, MS 39702 • (25.8 miles) • Full Time • 10/5/2026

Heavy Equipment Operator Columbus, MS Burns Group is a family-owned business, established in 1977 serving the civil construction and aggregates industry in the Southeast. Our portfolio includes heavy civil, logistics, and recycling divisions. Our core values and dedication to our people guide every aspect of our company. We invite you to contact us and see what it means to be #burnsbuilt. Ideal Candidate Requires at least two years experience of the following responsibilities: Equipment Operation Operate a wide variety of motorized heavy equipment and vehicles used in earthwork and civil construction, including but not limited to: Bulldozers Excavators Motorgraders / Rollers Articulated and off-road haul trucks Loaders and skid steers Clear and grub sites, strip topsoil, cut and fill, spre

West Point, MS 39773 • (33.3 miles) • Full Time • $17.00 to $19.00 / hr • 9/29/2026

Job Summary This position is responsible for formulating and applying properly mixed and dispensed automotive refinish materials to vehicle surfaces and sub-assemblies, using spray-painting equipment, power tools and other related equipment. Responsibilities Inspect vehicle to be painted for proper body repair, prepping and/or masking and notify manager when imperfections are found before applying any refinish coatings. Assure all refinish products are properly formulated to meet color match and finish texture expectations, utilizing all tools and techniques provided by paint suppliers technical support system (i.e., color match system, etc.). Mix only the amount of refinish products (primer, base and clear) required to cover repair/refinish area and limit waste, using paint suppliers “mix

Fayette, AL 35555 • (17.9 miles) • Full Time • 9/24/2026

Description Ox Bodies’ products have endured even the toughest of conditions on construction sites around the country and abroad since 1972. We’ve walked in your boots – we get it. Time is money, and we strive to provide the highest quality, most durable products, equipped to handle any job you throw at them. Our reputation and our people are what have made Ox the industry leader. We are your premier partner for designing and manufacturing Class 6 to 8 dump bodies in the United States and across the globe. Innovative, rugged, high-performance truck bodies, parts, and accessories, all manufactured by hard-working people in Fayette, Alabama. Our ingenuity allows us to manufacture, assemble, and deliver a complete product. No one else can duplicate what we do or do it better, and if that’s no

Columbus, MS 39701 • (33 miles) • Full Time • 10/10/2026

Description: Coordinating daily tasks according to priorities and plans, making changes when necessary due to weather, supply, delivery and personnel Delegating individual responsibilities and projects to crew members and contractors Coordinating with business leaders for recruiting, hiring, training, managing and mentoring employees and contractors Providing adequate resources and staffing to meet project schedules, laws, regulations, best practices and safety needs Emphasizing safe use of tools, machinery and equipment while providing training on safety gear, helmets and procedures Developing and managing project budgets and quality standards for all sites Resolving conflicts or miscommunications quickly and amicably Regularly reporting project status to supervisors, site engineers and o

Fayette, AL 35555 • (17.9 miles) • Full Time • 10/15/2026

Essential Duties: Observe and follow all posted, written, and verbally communicated safety standards and PPE requirements. Work all assigned days, shifts, and overtime as required and/or scheduled. Locate and drive chassis in and around the facility. Transport chassis drivers to and from offsite location. Stage chassis for installation process. Using a jib crane, overhead crane, slings, fork truck, and/or manual lifting, move components/products into proper position. Select/identify and locate components accurately and correctly according to all work orders and/or work instructions. Cut as needed using a torch, portable plasma cutter, band saw, and/or iron worker. Grind and or buff as needed using an angle grinder. Correctly install all components according to all work orders and/or work i

Columbus, MS 39701 • (33 miles) • Full Time • 10/20/2026

Description: The Estimator is responsible for developing accurate, competitive, and profitable estimates and proposals for industrial construction, maintenance, mechanical, fabrication, and field-service projects. This position will review customer requirements, drawings, specifications, scopes of work, and site conditions; develop labor and material takeoffs; obtain vendor pricing; determine equipment and subcontractor requirements; and prepare complete project estimates and proposals. The Estimator will work closely with Account Managers, Project Management, Operations, Field Supervision, and the customer to ensure estimates accurately reflect the scope of work and the Company's ability to safely and successfully execute the project. The ideal candidate has strong industrial maintenance