Morrilton, AR 72110 • (23 miles) • Full Time • 10/27/2026

Position Overview Be a part of a motivated team responsible for providing hands-on technical support to all manufacturing operations for instrumentation and electrical control applications of the mill. Responsibilities Safety and environmental awareness of actions while performing job functions. Providing hands-on technical support to all manufacturing operations for instrumentation and electrical control applications, including paper machine, secondary fiber, automated warehouse, effluent treatment, and boiler room. Supporting process control systems and associated field devices. Supporting PLCs, Drives, and other control systems. Supporting 13.8 kV Power Distribution, Substations, MVSs, MCCs, 4160V and 480V motors. Supporting operations and troubleshooting of issues. Supporting capital p

Mayflower, AR 72106 • (42.4 miles) • Full Time • 11/4/2026

Liquid Environmental Solutions is seeking a CDL (Class A) or (Class B) Driver to be trained to become one of our Field Service Technicians! Schedule: 1AM - 3AM start until Route is Completed- 10 to 12 Hour days Monday through Friday - occasional Saturday Starting hourly wage $27 + steady OT The Field Service Technician , ( FST ) is a CDL company driver responsible for delivering exceptional service while servicing grease traps and used cooking oil bins from restaurants, industrial plants, shopping centers, and convenience stores. During the execution of services, our FST Drivers are responsible for complying with all DOT, state regulations, and company safety and compliance policies. REQUIREMENTS: Minimum of 1 year commercial or military driving experience ( Required ) Valid CDL Class (A)

Russellville, AR 72802 • (4.8 miles) • Full Time • $70,000 to $90,000 / yr • 10/30/2026

PLC Controls Engineer Since 1973, Taber Extrusions has been a leading manufacturer of aluminum extrusion-based products for OEMs in markets ranging from Military, Department of Defense, Aircraft/Aerospace, Marine/Shipbuilder, Boat Docks, Platforms, Decking, Motor Housing, Electronics, Heat Sinks, Automotive, Rail, and Structural Components. Taber is headquartered in Russellville, Arkansas and operates two manufacturing sites in Russellville and one manufacturing site located in Gulfport, Mississippi. The Company is segmented into four operating units; Extrusion, Cast House, Friction Stir Welding and Micro Extrusion. Taber has continued to make ongoing investments in their value-added capabilities by recently expanding their Russellville facility to house their new friction stir welder and

Russellville, AR 72802 • (4.8 miles) • Full Time • 10/30/2026

Position Summary Reports to: Site Director The Manufacturing Process Engineer’s role is to design, evaluate, and optimize complex systems, processes, and layouts to maximize productivity, quality, and safety while reducing waste and costs. Abilities Required Essential Responsibilities Process & Workflow Optimization: Analyze manufacturing, assembly, or service workflows to eliminate bottlenecks and streamline operations. Data & Time Studies: Collect and evaluate production data through time studies, work observations, and staff surveys. Facility & Ergonomic Design: Plan and redesign floor layouts, workstation ergonomics, and material handling systems to protect worker safety and minimize fatigue. Continuous Improvement applying methodologies like Lean Manufacturing and Six Sigma (Lean Six

Clarksville, AR 72830 • (26.7 miles) • Full Time • 10/30/2026

We are seeking a detail-oriented Senior Project Engineer to serve as the operations team's on-site representative during data center construction projects. This role ensures construction quality meets operational requirements before facility turnover. The postion serves as the as the guardian of construction and engineering quality, responsible for implementing and monitoring quality management systems throughout the entire project lifecycle. This position bridges the gap between theoretical quality engineering standards and practical construction execution, requiring regular on-site presence at project locations and close collaboration with design engineers, project delivery managers, and commissioning teams. Key Responsibilities Implement and uphold QA/QC standards by enforcing standardi

Conway, AR 72034 • (40.3 miles) • Full Time • 10/27/2026

Safety Statement: This is not a safety sensitive position. Job Purpose: Supports all customer order generation and fulfillment groups, including Marketing, Customer Service, Operations, Purchasing, and Distribution, by providing the information, tools, and processes required to effectively operate the business. Provides support to manufacturing in attaining all divisional goals for manufacturing. Essential Functions: Conducts time and Motion analysis as input for all business system labor standards. Conducts analysis for business system material usage standards, and material specifications. Determines, develops, and maintains product process routings as input for business system product routings. Develops and maintains/provides input, for all business system master data. Provides manufactu

Hot Springs Village, AR 71909 • (44.6 miles) • Full Time • $20.00 to $25.00 / hr • 10/24/2026

Training/Base pay rate of $17.00 per hour. The Base rate increases by .50 upon completion of training. We have a Guaranteed Hourly Rate of $20.00 per hour upon completion of training through your first 9 months. This allows time to build your bonus and commission skills. If your post-training base rate, plus bonuses and commission don’t bring you to the Guaranteed Hourly Rate, we will increase your pay. However, the earning potential is much higher! Schedule: 2 days off during the week; during slower season enjoy a four-on, three-off schedule. Bonus Opportunity: Earn a Trained and Active Bonus of $500.00, paid in two installments: $250.00 at 60 days of employment and $250.00 at 6 months. About Us: At Southern Star, we are the driving fulfillment force behind award-winning DISH TV, cutting

Clarksville, AR 72830 • (26.7 miles) • Full Time • 10/23/2026

**Nationwide Search - Relocation and opportunities to travel available** One of the fastest growing manufacturers of mission critical power equipment is seeking Field Service Techs to oversee the installation and commissioning of their equipment. The right candidate will have a background doing low to mid voltage electrical work and some formal education; trade school, military, or on the job. Though no formal certifications are required. The right candidate will be customer focused, attentive to detail, and a solid communicator both verbal and written. The person will be charged with the start up, commissioning, trouble shooting, and repair of power equipment such as PDUs found in data centers. So experience and aptitude in electrical installations, repairs, and service for sophisticated

Clarksville, AR 72830 • (26.7 miles) • Full Time • 10/23/2026

Senior Automation Engineer Department: Automation FLSA Designation: Non-Exempt PURPOSE The Senior Automation Engineer provides technical start-up, checkout and programming for Building Automation and Manufacturing Control Systems. Maintain and grow the “Client for Life” concept for existing and new customers. Performs related work as required. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES The following duties are typical for this job. These are not to be constructed as exclusive or all inclusive. Other duties may be required and assigned. Start-up of Microprocessor based control components including PLC and DDC controllers, sensors, actuators, transducers, and associated components. Point-to-point checkout of wiring and components for proper grounding, polarity, communication and power. Set up

Conway, AR 72034 • (40.3 miles) • Full Time • 10/17/2026

Key Responsibilities: Leadership and Management: Lead and mentor a team of telecommunications engineers and technicians. Collaborate to develop and implement engineering strategies, goals, and objectives. Ensure timeline, financial and quality compliance on projects Technical Oversight: Oversee the design of telecommunications systems. Understand and ensure compliance with industry standards, regulations, and best practices. Conduct technical reviews and provide guidance on complex engineering issues. Collaboration and Time Management: Manage multiple projects simultaneously, from initial concept through to completion. Coordinate with cross-functional teams, including IT, operations, and external vendors. Prepare and present project status reports to senior management. Quality Assurance: I

Altus, AR 72821 • (35 miles) • Part Time • 10/11/2026

Description: Part-Time, temporary, seasonal, farm (15-30 hours/week) Schedule: M-F, 7 am - 3 pm; can and will change with weather and conditions; some Saturday work may be needed. Position Overview: The Technician role is a vital part of hands-on vineyard care, including pruning, planting support, and irrigation maintenance. This position follows guidance from the VineyardManager to support healthy vine growth and vineyard productivity. Key Responsibilities: - Prune dormant vines by removing dead wood to support new annual growth - Assist with weeding, digging, hoeing, and planting tasks - Install and repair trellising infrastructure or irrigation lines - Cleaning and organizing work areas as well as cleaning and maintaining equipment you have used. - Perform general vineyard care tasks as

Russellville, AR 72801 • (0.3 miles) • Full Time • 10/9/2026

Rightfiber is one of the nation's largest privately held telecommunications platforms, serving more than 400 communities across a 20-state footprint. With more than 100 years of experience, we deliver high-speed internet, voice, and technology solutions that help homes, businesses, and communities thrive. While our network spans a broad geographic area, our commitment remains local. We believe in building lasting relationships, providing exceptional service, and investing in the communities where we live and work. General Summary: The Sr. Construction Coordinator - Engineer oversees and coordinates standard to complex engineering and construction activities associated with Enterprise customers. This role provides advanced level oversight to stakeholders by ensuring efficient preparation an

Conway, AR 72034 • (40.3 miles) • Full Time • $20.18 / hr • 10/15/2026

We are growing and looking for Laser Operators to join our team on 1st shift. DBG Arkansas, LLC is a full-service organization that is committed to providing our customers with exceptional quality, on-time delivery, and cost-saving opportunities. Our operations in Conway, Arkansas include metal stamping, forming, painting, and assembly. The facility utilizes stamping presses, brake presses, roll forms, lasers, shears, and a multi-stage paint process. A concept to finished products company providing parts and sub-assemblies to our customers. We rely on the strength and experience of our Associates for our success. If this is a company that you would like to be a part of, we currently have opportunities for safety-conscious, qualified, motivated, team-oriented, and quality-focused individual

Morrilton, AR 72110 • (23 miles) • Full Time • 10/18/2026

Position Overview Reporting to the Reliability Superintendent, the Maintenance Integrity Engineer for the Arkansas Kraft Division will have Primary responsibility for fixed equipment reliability, Root Cause Failure Analysis, Maintenance Best Practices, and engineering support for the Maintenance department, including troubleshooting, corrective actions, etc. Responsibilities A steadfast commitment to safety and environmental stewardship. Supporting the highest department quality and productivity levels. Managing asset quality; ensuring the manufacturing reliability of equipment, focusing on reducing and minimizing process downtime. Work closely with the area production managers to establish objectives consistent with the Arkansas Kraft Division’s vision and strategy. Strong leadershi

Russellville, AR 72802 • (4.8 miles) • Full Time • $65,000 to $90,000 / yr • 10/30/2026

Continuous Improvement Engineer Since 1973, Taber Extrusions has been a leading manufacturer of aluminum extrusion-based products for OEMs in markets ranging from Military, Department of Defense, Aircraft/Aerospace, Marine/Shipbuilder, Boat Docks, Platforms, Decking, Motor Housing, Electronics, Heat Sinks, Automotive, Rail, and Structural Components. Taber is headquartered in Russellville, Arkansas and operates two manufacturing sites in Russellville and one manufacturing site located in Gulfport, Mississippi. The Company is segmented into four operating units; Extrusion, Cast House, Friction Stir Welding and Micro Extrusion. Taber has continued to make ongoing investments in their value-added capabilities by recently expanding their Russellville facility to house their new friction stir w

Clarksville, AR 72830 • (26.7 miles) • Full Time • 10/20/2026

PURPOSE Provide technical start-up, checkout and programming for Building Automation and Control Systems. Maintain and grow the “Client for Life” concept for existing and new customers. Performs related work as required. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES The following duties are typical for this job. These are not to be constructed as exclusive or all inclusive. Other duties may be required and assigned. Work collaboratively with design engineers, operation engineers, and purchasers and other internal staff Start-up of Microprocessor based control components including PLC and DDC controllers, sensors, actuators, transducers, and associated components Understand construction schedules and manage QA/QC checklists and commissioning logs Ability to interpret Sequence of Operations (SOO)

Clarksville, AR 72830 • (26.7 miles) • Full Time • 10/30/2026

PURPOSE The Senior Automation Engineer provides technical start-up, checkout and programming for Building Automation and Manufacturing Control Systems. Maintain and grow the “Client for Life” concept for existing and new clients. Performs related work as required. Candidates applying through the Little Rock, Fort Smith, or Fayetteville, Arkansas postings should be aware that the position's physical work location is in Clarksville, Arkansas. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES The following duties are typical for this job. These are not to be constructed as exclusive or all inclusive. Other duties may be required and assigned. Start-up of Microprocessor based control components including PLC and DDC controllers, sensors, actuators, transducers, and associated components. Point-to-point

Clarksville, AR 72830 • (26.7 miles) • Full Time • 10/30/2026

PURPOSE The Project Engineer provides technical support and administrative help to Project Managers and the business unit as a whole. Candidates applying through the Little Rock, Fort Smith, or Fayetteville, Arkansas postings should be aware that the position's physical work location is in Clarksville, Arkansas. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES The following duties are typical for this job. These are not to be construed as exclusive or all inclusive. Other duties may be required and assigned. At a high level, under direct supervision of a Project Manager, a Project Engineer will: Provide sales and business development support as needed to build client relationships, obtain more work, including providing assistance with design, material selection, estimating, and creation of proposa

Clarksville, AR 72830 • (26.7 miles) • Full Time • 10/30/2026

PURPOSE The Project Engineer provides technical support and administrative help to Project Managers and the business unit as a whole. Candidates applying through the Little Rock, Fort Smith, or Fayetteville, Arkansas postings should be aware that the position's physical work location is in Clarksville, Arkansas. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES The following duties are typical for this job. These are not to be construed as exclusive or all inclusive. Other duties may be required and assigned. At a high level, under direct supervision of a Project Manager, a Project Engineer will: Provide sales and business development support as needed to build client relationships, obtain more work, including providing assistance with design, material selection, estimating, and creation of proposa

Clarksville, AR 72830 • (26.7 miles) • Full Time • 10/30/2026

PURPOSE Provide technical start-up, checkout and programming for Building Automation and Control Systems. Maintain and grow the “Client for Life” concept for existing and new customers. Performs related work as required. Candidates applying through the Little Rock, Fort Smith, or Fayetteville, Arkansas postings should be aware that the position's physical work location is in Clarksville, Arkansas. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES The following duties are typical for this job. These are not to be constructed as exclusive or all inclusive. Other duties may be required and assigned. Work collaboratively with design engineers, operation engineers, and purchasers and other internal staff Start-up of Microprocessor based control components including PLC and DDC controllers, sensors, actu