Fountain Valley, CA 92708 • (19 miles) • Full Time • 9/14/2026

SPEC Services, Inc. is a premier firm in Electrical and Control Systems engineering and is seeking a self-motivated and energetic applicant to apply for an Electrical & Control Systems Lead Designerposition in Southern California.About the PositionIn thisposition, you will apply your knowledge of the principles of electrical & control systems design to:Lead the development of industrial construction drawings, including single line diagrams, area classification diagrams, grounding, lighting, conduit/cable tray, schematics and wiring diagrams, cable/conduit schedules, installation details, PLC panel layout and I/O schematics, loop diagrams and control system architecture.Work in a team environment with electrical engineers and other disciplines (e.g. project management, piping, mechanical, c

Compton, CA 90222 • (2.6 miles) • Full Time • 9/14/2026

Come create your career with Volt!Solo se permite hablar espaolVolt is immediately hiring for Bilingual Production Associate in Vernon, CA.As a Bilingual Production Associate, you will:Pick/Pack/Sort inventory in Production Environment.Must be bilingual (Spanish and English)Exceed production and safety standardsInspect orders/product and load trucks for shipmentUnload trucks, receive and locate inventory in warehouseScan/label inventory using RF scanner, build pallets for shippingMaintain/Operate warehouse equipment including pallet jacks, hand trucksPerform general labor as needed, moving product throughout warehousePick product from inventory, complete customer orders, stage product for loadingAssistance if cleaning of production floor as neededThe ideal candidate will have:Must have rel

Carson, CA 90745 • (5.6 miles) • Full Time • 9/14/2026

Job Title: Quality InspectorPAY: Up to $40/hrJob DescriptionThe Quality Inspector performs first article, in-process, and final inspections on aerospace components, including CNC-machined and electro-mechanical parts. This role interprets engineering drawings and GD&T to verify compliance with specifications, maintains accurate quality records, and supports audit readiness. The Quality Inspector uses ERP and MES systems to document inspection results, manage non-conformances, and ensure adherence to AS9100 and ITAR requirements while maintaining calibrated inspection tools.ResponsibilitiesPerform first article inspections on aerospace components, including CNC-machined and electro-mechanical parts, to verify conformance to engineering requirements.Conduct in-process and final inspections t

Bell Gardens, CA • (6.3 miles) • Full Time • 9/14/2026

Please note: This role is based in Bell Gardens, CA.Position Summary:We are looking for skilled machinists with extensive experience in CNC and/or conventional machining. The ideal candidate will have strong knowledge of machine setups, fixturing, and "hands-on" programming or editing for CNC operations.Key Responsibilities:Set up and operate large CNC and conventional horizontal boring mills, machining centers, lathes, and VTLs.Read and interpret engineering drawings, blueprints, and specifications.Perform "hands-on" programming and editing of CNC machines (for CNC applicants).Utilize shop math to calculate machining speeds, feeds, and dimensions.Inspect finished products to ensure adherence to specifications and quality standards.Collaborate with team members to optimize machining proces

Los Alamitos, CA 90720 • (10.3 miles) • Full Time • 9/14/2026

Applied Composites (AC) is seeking a Master Schedulerwhowill create, integrate, and manage production schedules to ensure that the manufacturing capacity meets current customer demand. This process will entail partnering with Program Management and Operations to integrate multiple program requirements into an integrated schedule. Partnering with Operations the schedule will be resource loaded with appropriate labor and equipment to meet customer demand at the lowest cost. Additionally, the Master Scheduler will advise manufacturing on the necessary prioritization within the schedule supporting changing demand.About AC: Come and join the Applied Composites team. We are a leading provider of complex composite components, assemblies, engineering and tooling to the aerospace, defense and space

Los Angeles, CA • (19.5 miles) • Full Time • 9/14/2026

About Delta Hi-TechDelta Hi-Tech is a precision contract manufacturer serving the Aerospace, Medical, Defense, and Commercial industries. Since 1984, we have built a reputation for delivering high-quality machined components, fabricated assemblies, and manufacturing solutions to customers throughout the United States.Our Chatsworth, California facility employs over 200 team members and features advanced CNC machining, multi-axis turning, milling, sheet metal fabrication, welding, and assembly capabilities. We maintain certifications including AS9100, ISO 9001, and ISO 13485.Learn more at:www.deltahi-tech.comPosition SummaryWe are seeking an experiencedEstimator / Production Plannerto join our manufacturing team. This role is responsible for reviewing customer requirements, estimating manuf

Los Angeles, CA • (19.5 miles) • Full Time • 9/14/2026

The Embroidery Quality Manager oversees a small team of skilled Embroiders, ensuring that all embroidery products meet high standards of precision and craftsmanship. Reporting directly to the Owner/Creative Director, this role requires meticulous attention to detail and strong leadership skills to maintain and enhance product quality within the company.ResponsibilitiesConduct thorough quality control inspections of embroidery productsLead and manage a small quality management team of 1-5 membersDevelop and enforce quality standards and proceduresCollaborate with production and design teams to address quality issuesEnsure consistent adherence to company and industry embroidery standardsPreferred Qualifications3+ years of verifiable embroidery experienceStrong knowledge of quality control an

Rancho Cucamonga, CA • (40.2 miles) • Full Time • 9/14/2026

Quality Technicianpay rate: $26/hr - $30/hrshift: shift: 1st shift 8:30am - 5pm**Previous experience required**Job Code: 82510014 The Technology Quality Technician is responsible for conducting quality control activities, including inspections, tests and results reporting. The Technology Quality Technician combines practical skills with understanding of the overall Quality Management System and the impact of nonconformances on the performance of equipment and systems. * Inspect documentation, parts, components, materials, subassemblies and equipment against stated specifications, using measurement systems with valid calibration and acceptable repeatability and reproducibility. Comply with applicable inspection procedures and standard work. * Perform manufacturing and engineering tests in c

Brea, CA 92821 • (19.5 miles) • Full Time • 9/13/2026

M.R. Mold & Engineering Corp. for 37 years has specialized in tight-tolerance, flash less LSR, rubber and plastic prototype, production, and micro injection molds for medical and dental applications, including implantables, masks, and hearing aid products. Other industries served include aerospace, consumer products, and fluid handling. We are currently looking for an experienced Liquid Silicone Rubber Injection Mold Designer in the Orange County area.Responsibilities:Controlled revision changes per Engineering Change OrdersAbility to create simple/ and often complex 3D models using CreoCreate Bill of materials, Detail and Assy drawings per ANSI Y14.5 using primarily Creo and occasionally AutoCAD.Works with engineering and the sales team to determine part design and/or modificationsEvaluat

Santa Ana, CA 92704 • (20.6 miles) • Full Time • 9/13/2026

We are seeking aCNC Machinistto join our team!OperateCNC machines andConventional machines.The CNC machine operator is responsible for maintaining the CNC machines running atall times; maintains the shop area clean, including but not limited to machine shop machines and equipment. TheCNC machine operator is responsible for learning to operate machine shop equipment, including measuringtools such as calipers, micrometers, depth micrometers, and test indicators.Responsibilities:Cleans the machine shop floor, sweeps metal chips off the ground.Keeps the CNC machine running at all times.Reports any related issues to the manager as soon as possible.Learns how to operate the machine shop equipment.Learns how to use measuring tools. Cutting speeds and feeds.Performs work according to safety polici

Santa Ana, CA • (21.3 miles) • Full Time • 9/13/2026

Small Architectural Office searching for an Aspiring Talent, fresh from Architectural School, to work on a variety of interesting and challenging projects. We are a highly crafted office that relies on good fundamentals and quality composed drawings to feature our work. The work ranges from the preparation of construction drawings to design development, and design presentation. AutoCAD experience is a must. Desire Sketch Up Skills, and a deep interest to develop lifetime architectural experience and skills.\nCompany DescriptionEnter-Arc is a small size firm with large firm capabilities. We specialize in Enter-prising / Enter-tainment Architecture. We do interesting and complex projects using old school Architectural fundamentals to craft project designs and construction drawings. We are pa

Carson, CA • (4.4 miles) • Full Time • 9/13/2026

We are currently seeking motivated and dependable Entry-Level Machine Operators to join our manufacturing team on both 1st and 2nd shifts. No prior machine operating experience is required; training will be provided. This position is ideal for individuals looking to begin a career in manufacturing and production.SCHEDULES AVAILABLE :5AM-5PM5PM-5AMThe Machine Operator will be responsible for operating production equipment, inspecting products for quality, and maintaining a safe and efficient work environment.Essential Duties and ResponsibilitiesOperate manufacturing equipment according to work instructions and safety guidelines.Load materials into machines and remove finished products.Monitor machine operations to ensure efficient production.Perform visual inspections of products to verify

Long Beach, CA • (6.4 miles) • Full Time • 9/13/2026

Job description:OverviewWe are seeking a skilled CNC Programmer for our 3, 4 & 5 Axis CNC engineering department. The ideal candidate will possess a strong background in CNC programming and machining, with expertise in various programming languages and tools. This role is essential for ensuring precision and efficiency in our production processes, contributing to the overall success of our operations.DutiesEnsures conformance to established procedures and quality level.Policy and conformance to Customer Engineering and Specifications.Analyzes drawings and part design data to determine dimension and configuration of cuts, selection of cutting tools, and machine speeds and feed rates, according to knowledge of machine shop processes, part specifications, and machine capabilities.Create compu

Santa Fe Springs, CA • (8.9 miles) • Full Time • 9/13/2026

The JobYou program parts for a project, then you go set them up and run them. Both halves are the job.Medium to large mill and lathe work on Haas and Fanuc controls. You write the program, verify the tooling, run the first article, and then float between machines keeping parts in tolerance and toolpaths efficient.This is not a button-pushing role, and it is not a desk job either.A typical daySet up the first jobs of the shiftWrite the program, or verify one already writtenConfirm tool requirements before the job runsRun the job and check the first articleMove between multiple machines through the day, watching part quality, tooling condition, and cycle timeWhat you needThree or more years programming and setting up CNC equipmentYou have written complete programs yourself, including toolpat

City of Industry, CA • (17 miles) • Full Time • 9/13/2026

Our growing company is hiring an Production Assembler I in the Architectural Hardware Industry. To join our growing team, please review the list of responsibilities and qualifications. We look forward to reviewing your resume.The Production Assembler I is responsible for basic assembly work to assemble components as needed to customer orders and demands.The Production Assembler I will be responsible for the following:Ability to use light powered electrical or mechanical tools for assemblyTo complete daily production tasks as in numbers of orders/units completed in a single working cell or processing line based on demandsTo read and follow company documents - safety rules, operating instructions, policies and proceduresTo perform additional duties as designed (i.e. 5S events, lean manufactu

City of Industry, CA • (17 miles) • Full Time • 9/13/2026

Used Equipment InspectorQuinn Company, your local Caterpillar dealerCity of Industry, California$75,431 – $90,000Are you a technically skilled equipment expert who takes pride in accuracy, quality, and detailed inspections? Do you enjoy evaluating machinery, estimating repairs, and supporting sales teams with reliable technical insight?Quinn Company a topperforming Caterpillar dealership with more than a century of industry leadership is hiring a Used Equipment Inspector in City of Industry, California. In this role, you will evaluate heavy earthmoving and agricultural equipment for purchase or tradein, support equipment valuation, provide technical training, and help ensure used machines meet Quinn’s high standards for performance and safety.Founded in 1919, Quinn Company sells, services,

Huntington Beach, CA • (17.6 miles) • Full Time • 9/13/2026

Pathway Grouop has partnered with an industry leading aerospace frim in the Huntington Beach, CA area.Job descriptionPosition Overview:Assemble routine mechanical assemblies, subassemblies, and top assemblies of mild to most complex product line for both the commercial aerospace sector. May occasional work on electrical assemblies and bonding.In this function you will:Assembly of mechanical assemblies, subassemblies, and top assemblies. Ensure activities are performed correctly and proper tooling and documentation is used. Requires little to no supervision.Perform "cradle to grave" assembliesProactively identifies best practices.Must have the ability to utilize hand tools such as, but not limited to, pliers, wrenches, screwdrivers, arbor press, vises, depth micrometers, calipers, lockwire

Fountain Valley, CA • (19 miles) • Full Time • 9/13/2026

1.0 OVERVIEWJoin our dynamic manufacturing team as an Assembly Technician - II, where you'll play a vital role in constructing high-quality products within a fast-paced factory environment. This position offers an exciting opportunity to develop your mechanical skills, work with advanced tools, and contribute to the production process that drives our success. As an integral part of our assembly line, you'll ensure that each component is assembled accurately and efficiently, supporting our commitment to excellence and innovation.AEROSPACE EXPERIENCE IS HIGHLY PREFERRED, IPC EXPERIENCE IS REQUIRED- PREVIOUS ASSEMBLY EXPERIENCE AS IT APPLIES TO OUR JOB SKILLS.THIS EXPERIENCE IS NOT REFLECTED IN THE BODY OF YOUR RESUME, YOU WILL NOT BE CONSIDERED- PLEASE INCLUDE DETAILS OF WHEN AND HOW YOU USE

Baldwin Park, CA • (19.1 miles) • Full Time • 9/13/2026

Looking for a refrigeration service tech with the minimum of 5 years experience in the restaurant industry must have extensive experience on ice machines self-contained units Refrigeration remote systems air conditioning equipment makeup air units some electrical exhaust fans and know how to weld must have own hand tools driving record must be clean DMV no DUIs great benefits great working conditions plenty of hours only seasoned journeyman need to apply no apprentices or no school graduates need to apply please do not apply\nCompany DescriptionWe are a full service HVAC, Refrigeration and Logistics service company.Company DescriptionWe are a full service HVAC, Refrigeration and Logistics service company.

Los Angeles, CA • (19.5 miles) • Full Time • 9/13/2026

City Design Studio is currently seeking two designers to join our team to work on sports facilities for the LA 2028 Olympics and several complex aviation projects at LAX. The selected designers will be assuming a key role in these projects.We are seeking highly motivated architects/designers who are enthusiastic about creating distinctive architectural buildings and communities. The ideal candidate will have a strong background in architecture and project management skills and can collaborate with multiple consultant teams in a fast-paced environment. The position offers ample growth opportunities for an organized candidate who can manage diverse tasks.Salary Range: Commensurate with experience and skillsets. Competitive benefitsQualificationsBachelor’s Degree in Architecture and preferabl

Irwindale, CA • (20.9 miles) • Full Time • 9/13/2026

Electrical Testing EngineerMee Industries Inc. was found in the 1969. The company is a leader in developing and manufacturing fog systems for a variety of applications. MeeFog systems are used for cooling gas turbines for the power industry and for humidifying and cooling manufacturing facilities, greenhouses, and wine barrel storage facilities that need a controlled environment. MeeFog systems are also used for special effects to create a cloud or fog effect for landscapes, amusement parks and zoos.We are seeking an Electrical Engineer to perform final testing of the gas turbine inlet air-cooling (fog) systems as well as other MeeFog humidifying systems in the U.S. and abroad. Qualified candidates must have the following knowledge and experience:ESSENTIAL DUTIES AND RESPONSIBILITIESUnder

Newport Beach, CA • (27 miles) • Full Time • 9/13/2026

JOB SUMMARY: They are responsible for completing the daily production schedule and ensuring optimal quality for all work completed.DUTIES AND RESPONSIBILITIES:o Work directly with operator on technical improvements and efficiencyo Provide constant support where neededo Accountable for good attendance and punctualityo Inform management of quality issues and problems in departmento Assist with in-process inspection company-wideo Complete job travelerso Processing Competencies: Rack, De-Rack, Etch, Chem Film, Anodize (Type I, II, III, 1C)o Inspection Competencies: Thickness gage, Micrometer (ID, OD), Bore gage, and CaliperFollow all safety policies and proceduresReceiving Inspection: Count, Visual Inspection, Completion of Previous Operations, etc.Maintain a clean and organized department (da

Azusa, CA 91702 • (32.8 miles) • Full Time • 9/13/2026

D.W. Mack Co., Inc. is seeking a punch press operator to join our team in Azusa, CA.Responsibilities:Setup and Operation: Set up and operate punch presses according to instructions and routing reports. This includes pulling tooling, preparing setup jobs, and ensuring the press is ready for operation.Material Handling: Handle raw materials like steel, aluminum, or plastic, preparing them for the press.Production: Produce parts according to specifications, ensuring quality and quantity standards are met.Troubleshooting: Troubleshoot any issues with the machine and make necessary adjustments.Safety: Follow all safety procedures and wear appropriate personal protective equipment (PPE).Maintenance: Keep the work area clean and organized.Hours:D.W. Mack Co., Inc. works an alternative work week s

Ontario, CA • (36 miles) • Full Time • 9/13/2026

Production Foreman – Electrical Equipment ManufacturingLocation: Mira Loma, CA – OnsiteTarget Market: Ontario / Riverside / Inland EmpirePay Range: $32.00–$42.00 per hourEmployment Type: Full-Time- Direct Hire PlacementOpportunityLegacy Career Solutions is partnering with a rapidly growing electrical equipment manufacturer in the Inland Empire that designs and manufactures custom power-distribution equipment for commercial and industrial applications.We are seeking an experienced, hands-on Production Foreman who can take ownership of daily floor activities, lead production employees, maintain accountability, and help ensure projects are completed safely, accurately, and on schedule.This is not a desk-only supervisory position. The successful candidate will be highly visible on the producti

Corona, CA • (36.8 miles) • Full Time • 9/13/2026

Sets up, adjusts, or operates basic or specialized machine tools used to perform precision machining operations.Aligns and secures holding fixtures, cutting tools, attachments, accessories, or materials onto machines.Measures, examines, completed components to check for defects and ensure conformance to specifications, using precision instruments, such as micrometers.Monitors the feed and speed of machines during the machining process.Maintains machine tools in proper operational condition.Studies sample parts, blueprints, drawings, or engineering information to determine methods or sequences of operations needed to manufacture componentsConduct in-process and first piece inspections prior to production run.Confers with engineering, supervisory, or manufacturing personnel to exchange techn

Valencia, CA 91355 • (43 miles) • Full Time • 9/13/2026

Pay Rate: $18-22.25/hr, based on shiftShifts Available: 1st,2nd and 3rdHours: 7am-3:30pm/ 3:15pm-11:45pm/ 11pm-7:30amThis position performs a variety of routine and repetitive assembly operations and procedures. To perform these tasks the position uses a variety of operating equipment and tools. Responsible for the preparation of components for assembly or to build product. Works under general supervision where operations are specified by written and verbal instructions and established procedures.ROLES AND RESPONSIBILITIES• Performs assembly operations and procedures.• Exercises responsibility for meeting quality and quantity requirements.• Adheres to all Safety rules and procedures.• Maintains a level of attendance and punctuality that meets Company standards.• Notifies Supervisor or Team

Gardena, CA 90247 • (5.2 miles) • Full Time • 9/12/2026

Job Title: Process/Quality EngineerJob DescriptionServe as the site technical authority for all shot peening processes and related quality requirements. Ensure compliance with NADCAP, AS9100, customer specifications, and aerospace industry standards. Lead the preparation and execution of NADCAP, customer, and internal audits. Develop, review, and maintain documentation such as technique sheets, work instructions, operating procedures, and process specifications.ResponsibilitiesProvide technical oversight for Automated, Manual, Tumble Peening, and Shot Peen Forming operations.Manage calibration systems for equipment, gauges, and quality measurement devices.Oversee preventive maintenance programs and monitor equipment performance.Administer document control and quality records in accordance

Inglewood, CA • (9.3 miles) • Full Time • 9/12/2026

Electrical Assembler IIThe Electrical Assembler II is responsible for assembling, testing, inspecting, and modifying electronic and electromechanical assemblies. This role involves working with wire harnesses, cables, soldering, molding, adhesives, and other electrical components while following detailed drawings, specifications, and quality standards.Key ResponsibilitiesAssemble and test electrical and electromechanical products.Use hand tools, torque wrenches, crimping tools, calipers, and other assembly equipment.Read and follow blueprints, schematics, and work instructions.Perform inspections and ensure compliance with ESD and quality requirements.Verify materials, equipment calibration, and component specifications before use.Support continuous improvement through Lean and 6S practice

Anaheim, CA 92801 • (14.9 miles) • Full Time • 9/12/2026

6 AM to 2:30 PMQualificationsHigh school diploma/GED2+ years of assembly experienceLaser engraving experienceQuality controlStrong SOP adherenceMS Office proficiencyStrong visual/mechanical inspection skillsPhysical ability to stand/walk through a full shift and lift up to 50 lbs.ResponsibilitiesAssembly line work: prepping child parts, meeting daily assembly targets, lubricating components, and tracking quality documentation.Laser engraving : labeling parts per schedule, operating laser fixtures, and packaging finished pallets.Quality controlMaintaining a clean, organized workstationReporting any equipment or part issues

Santa Monica, CA 90404 • (18.2 miles) • Full Time • 9/12/2026

About the job12 monthsSanta Monica, CAOnsitePays up to $56.68/hr depending on experienceOur Client is seeking a highly motivated and detail-oriented individual with process development experience to work on innovative T cell therapies for cancer treatment. The Process Engineer will be responsible for designing and executing experiments in the lab, help process development, process characterization, technology transfer activities, support or improve existing technologies, implement innovative solutions in commercial, and clinical manufacturing to advance the client's product portfolio. Additional responsibilities include analyzing and presenting experimental results, drafting / reviewing protocols, production procedures, and technical reports including documentation for regulatory filings.

Los Angeles, CA • (19.5 miles) • Full Time • 9/12/2026

Qualifications:Must live close to Los Angeles, metropolitan area or willing to relocate.Must have a Bachelor's Degree in Electrical Engineering or 3 years of NETA testing in Medium VoltageExperience in Commissioning in Data center and critical system environment.Must be able to work with limited supervision, organize own work activities, and prepare written reports.Able to travel up to 50%.Excellent communication, and writing skills.Proficient in MS office (Word, Excel)Must have a green card or a US citizenA plus:Short circuit, coordination, and arc flash studiesAutoCADWork remotely from home on reports and Method of Procedure. Travel for on site work for short durations (2-5 days). Provide consulting engineering services for electrical systems maintenance and testing services for electric

Burbank, CA • (22 miles) • Full Time • 9/12/2026

The Manufacturing Engineer II (ME II) works mainly within the operations group supporting operations and production requirements. The ME II will also support Design and Project Engineering efforts translating requirements into production implementation activities. Based on design requirements defined through drawings and specifications, the ME II plans and prepares manufacturing documentation according to Advanced Product Quality Planning (APQP) practices, including Visual Work Instructions (VWI). The ME II determines equipment, tooling plans, and cellular manufacturing concepts for their assigned area of responsibility. The ME II will originate and develop new manufacturing and tooling concepts, provides data to Estimating for quoting customer requests, prepare reports showing areas for i

Los Angeles, CA 91356 • (27 miles) • Full Time • 9/12/2026

Job Description:Working Hours: M-F 8 Hours; subject to change to 4x10's shift on either Sun.-Wed. or Wed.-Sat.We are seeking a Contract Manufacturing Specialist to support our dynamic Manufacturing team in the production of TCR-T, CAR-T, and allogeneic cell therapy investigational products.The Specialist, Manufacturing role will ensure successful manufacture and release of cell therapy products by following established processes in full compliance with cGMP.This role also supports manufacturing operational readiness and the successful technology transfer of pipeline products using knowledge of cGMP regulations.Using general application of principles, support activities to ensure GMP readiness for clinical manufacturing, including but not limited to equipment procurement, installation and q

Thousand Oaks, CA • (43.8 miles) • Full Time • 9/12/2026

TO APPLY, PLEASE VISIT OUR WEBSITE AT: WWW.RANTECANTENNAS.COMRantec Microwave Systems, Inc. located in Westlake Village, has an immediate opening for a Final/InProcess Inspector. The Inspector will inspect in-process and finished product to ensure compliance to drawing specifications, customer and company requirements. Prepare documentation for submittal and interface with customer or government source inspectors on final shippable product.Job Duties:· Operate a PC with Windows-based software (Word, Excel, etc.).· Read, interpret, and follow mechanical drawings, electrical schematics, work instructions, manufacturing procedures, quality procedures, and industry specifications.· Use handheld inspection equipment to ensure part compliance (calipers, micrometers, etc.).· Inspect product under

Long Beach, CA • (6.4 miles) • Full Time • 9/12/2026

CNC Machinist (lathes / mills)Experience with CNC machine operation and G-code programmingAbility to read blueprints and use precision measurement toolsMachine setup and tooling adjustmentsBasic math and geometry for part dimensionsMeasure and inspect finished parts using calipers, micrometers, and gauges.Must know how to operate Fanuc controlsFamiliarity with aerospace parts\nCompany DescriptionFrontier Technologies is a precision manufacturing and engineering company specializing in the development and production of complex mechanical solutions. We transform concepts, designs, and technical requirements into high-quality components, assemblies, and finished products for demanding industrial applications.Company DescriptionFrontier Technologies is a precision manufacturing and engineering

El Segundo, CA 90245 • (11.4 miles) • Full Time • 9/12/2026

GMP EXPERIENCE A MUST HAVE!QUALIFICATIONS:High school diploma or GEDAttention to detail Strong verbal and written communication skillsAbility to comprehend and follow instructionsAbility to understand and follow safety rules and Good Manufacturing Practices.Flexibility to work any/all shifts to support a high growth work environmentWORK ENVIRONMENT Warehouse and production manufacturing environment that includes both tempered and ambient areas.Position requires the ability to stand or sit for prolonged periods, step, balance, crouch, stoop, kneel, squat, bend, must be able to lift minimal 50 lbs. consistently, reach above shoulders, or as needed to complete tasks.Must be able to occasionally climb stairs or a ladder to complete tasks.Position located in a mix of production and office envir

La Habra, CA • (14.9 miles) • Full Time • 9/12/2026

SOLDERING ASSEMBLERWork schedule: 1st and 2nd shift available, multiple openings!QUALIFICATIONSHigh School Diploma or equivalent required.1+ year of soldering or assembly experience (manufacturing or hobbyist experience considered).Ability to read and follow work instructions in English.Strong attention to detail and willingness to learn.IPC-610 and/or J-STD-001 Certification preferred but not required.SUMMARYThe Hand Solderer I is an entry-level role responsible for performing basic hand soldering and assembly operations on Printed Circuit Board Assemblies (PCBAs) and subassemblies. This position focuses on developing soldering skills, following detailed instructions, and ensuring compliance with IPC Class 2 standards.ESSENTIAL DUTIES AND RESPONSIBILITIESPerform routine hand soldering of

Pasadena, CA • (19.3 miles) • Full Time • 9/12/2026

Job Title: Facilities Electrical Engineer – QA/QCLocation: Pasadena, CATemp position – 1+ year with possibility of extension/conversionPay: $44.55-$74.3 hourlyONSITEReady to make your electrical engineering expertise part of something bigger?We’re hiring aFacilities Electrical Engineerto support complex facilities and infrastructure in an innovative, mission-driven environment.In this role you will be a member of the Facilities Engineering Section and will report to the Supervisor of the Facilities Engineering and Design Group.Responsibilities include but are not limited to:Review electrical design drawings, calculations, and specifications for:Compliance with the California Electrical Code (CEC), and applicable building and energy codes.Adherence to the Facilities Design Standards and acc

Santa Ana, CA • (21.3 miles) • Full Time • 9/12/2026

About the RoleWe're a high-tech engineering, design, and fabrication company, we build for aerospace, architectural, automotive, entertainment, fine arts, marine, medical, and motorsports clients. We do a bit of everything, so no two weeks look the same. We're looking for a Composites Technician who wants to build things and grow with us. You don't need to walk in the door as an expert, we'll train you on prepregs, advanced wet layup, and resin infusion. What matters most is that you want to learn and you're a team player.What You'll DoLearn and perform composite fabrication techniques including wet layup, resin infusion, and prepreg layup (full training provided)Work across a wide range of industries and project types: aerospace, automotive, marine, medical, motorsports, architectural, en

Santa Ana, CA • (21.3 miles) • Full Time • 9/12/2026

DUTIES / RESPONSIBILITIES:Develop new products and do research and development for new product categories.Design components from customer or marketing specifications and generate layout, detail, sub-assembly, final assembly, and outline drawings to completely define the product’s electrical and mechanical parameters.Draw a functional design, Logic Synthesis of the functional design, selecting component, Test selected Components based on data sheet, implement them on Bread Board then on PCB.Write Coding for DSP and AIC and Testing and Trouble shoot circuit and coding. Understand logical flow of circuit diagram, order required circuit components and test them Implement Protocol Converter on a breadboard based on schematic provided - Solder tested circuit on a PCBConvert design concepts into

Santa Ana, CA • (21.3 miles) • Full Time • 9/12/2026

For over 45 years, a leading Southern California Electronic Manufacturing Service (EMS) company, whose services include PCB assembly, electro-mechanical assembly and systems integration has been providing manufacturing services to the industrial, medical, aerospace, defense, and automotive markets. The Company has an excellent Through-Hole Hand Soldering Assembler opportunity due to exceptional growth over the past two years.Position Overview:The Selective Solder Machine Operator is responsible for setting up, operating, programming, monitoring, and maintaining selective soldering equipment used to solder through-hole components onto printed circuit boards (PCBs). The role ensures product quality, compliance with IPC standards, and safe operation of equipment.Key Responsibilities:Set up, o