Los Angeles, CA • (13.6 miles) • Full Time • 9/16/2026

Overview We are looking for highly experienced professional drivers to support a series of regional vehicle test loops across the United States. The role requires exceptional driving skill, strong situational awareness, and the ability to operate safely in extreme weather and challenging terrain. No special certificates are required experience is the priority. Responsibilities Drive test vehicles through predefined regional test routes across the U.S.Operate vehicles safely in extreme heat, extreme cold, snow/ice, high elevation, and mountainous terrain.Maintain full alertness and compliance with route-specific safety protocols.Provide feedback on road conditions, environmental factors, and vehicle behavior.Conduct routine pre-trip and post-trip inspections (basic level).Follow instruction

Los Angeles, CA • (13.6 miles) • Full Time • 9/16/2026

An electro-assembler will be required to wire equipment based upon electrical diagrams. The assembler will need to wire and assemble precisely, neatly, and with organization. Qualifications: Experienced in working with industrial control assemblies Read and understand electrical diagrams Mechanically inclined. Point to point wiring, high and low voltage Electrical component installation experience Equipment panel wiring experience Work independently and with a team Good communication skills Excellent attention to details Potentially some soldering Note: Applicants will be tested on their abilities FULL TIME: Rate: $20-$23/hour Schedule: Mon-Thurs, 6am-4:30pm

Montebello, CA 90640 • (18 miles) • Full Time • 9/16/2026

Manufacturing company is looking for assemblers. Must be able to read and follow written instructions. Assemble using hand tools and having great attention to detail. Montebello, Ca. Monday - Friday 4am - 1pm with overtime as needed and possibility of working on Saturdays. Temp $20 an hour Please apply today if you are interested. As part of our promise to talent, Kelly supports those who work with us through a variety of benefits, perks, and work-related resources. Please note: The following benefits reflect Kelly's general offerings. Eligibility may vary by assignment, location, and job type. Kelly offers eligible employees voluntary benefit plans including medical, dental, vision, telemedicine, term life, whole life, accident insurance, critical illness, a legal plan, and short-term dis

South El Monte, CA 91733 • (21.9 miles) • Full Time • 9/16/2026

Hoefner Corporation, a manufacturer of Complex Precision Aerospace Machined Parts has immediate opening for the following position.Mechanical Experience in Cleanroom Assembler/Soldering SupervisorThis is a skilled position requiring experience with the following essential functions:Job Duties:Assembling of Mechanical AssembliesElectrical, Pneumatic and Hydraulic TestingLockwiringSoldering electrical connections and hand coil winding, familiarity with military, commercial, special electrical designs, and J-STD-001 Soldering requirements.Turret, Cup, Hook and Diodes TerminalsShrink TubingMarking machined parts and completed assemblies as required, rubber stamping and Electrochemical etching.Packaging and shipping all final products.Qualifications:Minimum 10-year experience in Assembling, Tes

Torrance, CA 90501 • (7.7 miles) • Full Time • 9/15/2026

Description: Read and follow production and engineering drawings or assemblies to build microwave and millimeter wave components and subassemblies on the sensor line.Perform mechanical assembly by using hand tools such as screwdrivers, tweezers, handpresses, and torque wrenches using manufacturing instructions.Perform conductive-epoxy die attach by using hand tools with an accuracy of +/- 0.002 inches.Perform diode placement and substrate fitting by using hand tools with an accuracy of +/- 0.002 inches.Perform mixing, measuring and application of a variety of conformal coatings, elastomer, potting, and bonding materials to various assemblies.Perform reliability testing of assembled components and subassemblies by using bond-pull and die-shear equipment.Complete inline inspection or peer re

Los Angeles, CA 90016 • (8.2 miles) • Full Time • 9/15/2026

iNRCORE Groupis a leading, vertically integrated provider of highly engineered, high-reliability, and high-performance passive electronic components. We are known for manufacturing proprietary magnetics, capacitors, resistors, filters, and more. We serve mission-critical data and power applications in the Defense, Aerospace & Avionics, Space, Smart Grid, Medical, AI/Data center, and Hi-Rel industrial markets.iNRCORE Group currently has fourteen (14) manufacturing facilities across the globe with more than one thousand (1000+) employees – and growing! Our business entities include company names such as Bicron, Coast Magnetics, DYCO, Gowanda, iNRCORE, Passive Plus, RCD, Sentran, TTE, and Vanguard Electronics. Our organization has a world-class reputation for innovation, quality products and

Santa Monica, CA 90404 • (8.6 miles) • Full Time • 9/15/2026

Benefits:Paid time offTraining & development401(k) matchingBonus based on performanceCompetitive salaryJob Title: Home Care Scheduler / Client Care CoordinatorLocation: Santa Monica, CA (On-site, 14th Street) Hours: Monday – Friday, 8:00 AM – 5:00 PM (Full-Time) Pay Range:$23.00- $28.00 per hour (Based on experience) About Us:Right at Home West LA is a licensed Home Care Organization serving clients across the West Los Angeles region. Our close-knit office team is compassionate, dedicated, hard-working, and fun. We work closely with our hands-on owner in a highly supportive environment where both our clients and caregivers come first. Benefits:Compensation: $24–$28/hr starting pay + overtime potential + annual performance bonus.Time Off: 80 hours of accrued Paid Time Off (PTO) per year. 6

Los Angeles, CA 90011 • (10.3 miles) • Full Time • 9/15/2026

Description: Job Title: Schedule CoordinatorDepartment: OperationsReports to: COOFLSA Status: Non-ExemptPrepared by: Human ResourcesLast Modified: 07/16/2026Job SummaryThe Schedule Coordinator is a critical member of the Patient Access team, responsible for coordinating and optimizing patient appointment scheduling across all clinic sites, departments, and provider schedules. This role ensures efficient scheduling practices that support timely patient access to care, minimize no-shows and gaps in provider templates, and maintain compliance with organizational and regulatory access standards. The Schedule Coordinator serves as a resource to front desk and scheduling staff and works closely with Clinic Supervisors, Clinic Managers, and providers to support smooth day-to-day clinic operations

Los Angeles, CA • (13.6 miles) • Full Time • 9/15/2026

M.S. Aerospace Inc. (MSA) is an aerospace manufacturer of high strength specialty fasteners, including bolts, screws, studs, and pins. Our products are of the highest quality and very close tolerances. Our products support the US Government, including the ISS, Space Shuttle and the most demanding defense equipment. We also support the most demanding OEMs in the commercial aviation industry.We offer a competitive benefits package including medical, dental, vision, and a monthly bonus.Join one of the fastest-growing aerospace companies byapplying now!*Industrial Electrician**Department*: MaintenanceDepartment/ Area: Shop FloorPosition Summary:Responsible for the performance of duties of a fully qualified electrician including installation, inspection, and repair of all electrical/electronic

Signal Hill, CA • (15.6 miles) • Full Time • 9/15/2026

Aerospace Installer / Mechanical AssemblerM-F 7:30am - 4:00PM$18-25/Hr. Position Summary We are seeking a skilled Aerospace Installer / Mechanical Assembler to join our production team. This role is responsible for the installation and assembly of aerospace hardware and structural components in accordance with engineering drawings, specifications, and quality standards. The ideal candidate has hands-on experience with aircraft or aerospace assemblies and is proficient with precision fastening and installation techniques. Essential Responsibilities Install and assemble aerospace components and hardware including: o Rivets o Nut plates o Bushings o Bearings o Gang channels o Structural and non-structural fasteners · Read and interpret blueprints, engineering drawings, work instructions, and

Santa Fe Springs, CA 90670 • (19.5 miles) • Full Time • 9/15/2026

Description: Mechanical Assembly Technician is responsible for interpreting blueprints, work instructions, and technical specifications to fabricate or repair aircraft ground support equipment. The technician must possess a strong working knowledge of mechanical assembly techniques, tooling, and company procedures to ensure precise and high-quality builds.Responsibilities & Duties:Assemble aircraft engine stands and subassemblies in accordance with engineering drawings and sketches.Review drawings and parts lists for accuracy and coordinate with other departments to resolve discrepancies.Inspect completed assemblies to verify conformance to specifications and quality standards.Perform functional and operational checks of assembled products.Ensure all assembly work meets AGSE quality and sa

Alhambra, CA 91801 • (19.8 miles) • Full Time • 9/15/2026

Job PurposeWe are seeking a highly organized and detail-oriented Scheduling Coordinator to join our team in the Program of All-Inclusive Care for the Elderly (PACE). The Scheduling Coordinator will play a crucial role in managing and coordinating appointments for participants of the PACE program, ensuring they receive comprehensive and timely care services. This position requires strong communication skills, multitasking ability, and a commitment to providing excellent customer service to elderly individuals.Duties and ResponsibilitiesSchedule and coordinate medical, therapeutic, and other health-related appointments for PACE participants in collaboration with healthcare providers and the interdisciplinary care team.Maintain accurate and up-to-date participant schedules, ensuring all appoi

Pasadena, CA 911052506 • (22.5 miles) • Full Time • 9/15/2026

Pay Rate: $26.00 per hourThe Salvation Army is hiring for full-time box truck drivers with benefits at our Pasadena ARC Warehouse to deliver and pick-up items from our stores.ABOUT THE ARCThe Salvation Army (TSA) Adult Rehabilitation Center (ARC) is a no-fee program to assist men & women in their journey to complete our rehabilitation program. We are grateful for the contributions our valued employees make toward the maintenance and effectiveness of the programs. The organization is indebted to and dependent on the diligence and devotion of its employees.ABOUT OUR RETAIL TEAMBecome part of the dedicated Production Team at The Salvation Army! Together we can continue to serve and impact our local community, through the commitment to “Do The Most Good” at our Pasadena Adult Rehabilitation Pr

La Mirada, CA 90638 • (22.6 miles) • Full Time • 9/15/2026

Solid State Devices, Inc.High Density, High Performance, and High Reliability Products for Aerospace & DefenseSSDI has been a pioneer in semiconductor manufacturing for over 50 years and has earned a reputation for setting the highest standards of reliability and performance. SSDI's high power and high voltage semiconductors and electronic systems meet the critical needs of many Aerospace and Defense applications.Assembler TechnicianWe are currently seeking motivated Assembler Technicians to join our dynamic team in the Wafer Fab. This is a great opportunity to grow within a high-tech, cleanroom-based manufacturing environment!As a team member in the Wafer Fab at Solid State Devices, Inc., you will be trained to perform the following tasks:Sand Blast Dicing - Precision cutting of semicondu

West Covina, CA 91790 • (28.6 miles) • Full Time • 9/15/2026

Final Assembly Team Lead – 1st Shift OnlyJoin a Company That Powers the Aviation Industry. Concorde Battery Corporation has been manufacturing high performance batteries for the aviation industry since 1979. We're a stable, growing company offering handson training, longterm career opportunities, and a consistent 1st shift schedule only - no nights. We're looking for an experienced assembler who can not only perform assembly work but also help train and guide others on the team.Why You'll Love Working Here1st shift schedule only (no nights) • Premium Health Insurance – $0 employee premium & $0 deductible • Company paid life insurance • Dental insurance • 10 paid holidays • Paid vacation and sick time • 401(k) with Profit Sharing • Weekly pay (Thursdays) • Employee referral bonusesWhat You'

Anaheim, CA 92806 • (31 miles) • Full Time • 9/15/2026

Job Title:Schedule Coordinator – Anaheim, CAEmployment Type:Full-Time Monday - Friday 07:30 AM - 04:30 PMCompensation:$24.00 - $27.00 (DOE)Experience Required:2 years of experience in an administrative role and at least 1 year experience of scheduling and/or dispatching.Scheduling Coordinator Benefits:Medical, dental, vision, life insurance401(k) with employer matchPTO, sick time, and holiday payFlexible Spending Account (FSA)Employee Assistance Program (EAP)Career growth opportunitiesEmployee discountsWhy Join AAA Facility Services?Since 1995, AAA Facility Services has delivered skilled trade services with a customer-first philosophy. We’ve built a reputation for going to extra mile – not just for our clients, but for our team members and service partners. Our core business focuses on com

Walnut, CA 91789 • (32.2 miles) • Full Time • 9/15/2026

Astrophysics Inc. is a leading global designer and manufacturer of X-Ray security inspection systems. Since 2002, we have dedicated ourselves to ensuring a safer world through advanced X-Ray screening and imaging technology. Our systems are deployed in critical infrastructure, aviation, and ports and borders sites in more than 150 countries. Hotels, prisons, courthouses, embassies, airports, military bases, and government buildings around the world depend on us for their safety and security. Astrophysics is an expanding, dynamic and fast-paced company looking for individuals who want to grow with us and be a part of a meaningful security mission. We currently have an immediate opening for a Mechanical Assembler located in City of Industry, California. This position is temporary with the op

Anaheim, CA 92807 • (35.4 miles) • Full Time • 9/15/2026

Description: The CompanyThe Cristek group is seeking a talented team player to join our team at our Anaheim, CA facility. The successful candidate is committed to pushing the boundaries of interconnect technology performance and innovation. Join us and connect your career to the future! With over 40 years of expertise designing and manufacturing micro- miniature and nano-miniature connectors, complex cable assemblies, twist capsules and mechanisms, the Cristek group offers tailored solutions to seamlessly connect you to your mission. The Cristek group's consistent, near-perfect performance, has earned it a position as preferred supplier to several major military/aerospace prime contractors and is a testament to its ability to operate a process-disciplined and metric- based business while m

Pomona, CA 91768 • (36.5 miles) • Full Time • 9/15/2026

Overview AMI Precision Machining is hiring a Deburr Technician to finish tight-tolerance aerospace components at our Pomona facility. You'll remove burrs, break and blend edges, finish surfaces, and inspect completed parts against blueprints and specifications.Hands-on experience with deburring, grinding, polishing, metal finishing, or precision machining is preferred. Aerospace experience is helpful but not required. You should be able to read basic blueprints and work carefully with small tolerances. Familiarity with AS9100 is preferred, not required. Responsibilities Perform deburring operations on aerospace components using various hand tools and machinery.Inspect parts for quality and compliance with specifications.Maintain a clean and organized workspace to ensure safety and efficien

Valencia, CA • (38.5 miles) • Full Time • 9/15/2026

DescriptionConducts variety of electronic tests on parts to ensure unit functions according to specifications or to determine cause of unit failure by performing the following duties.Key ResponsibilitiesReads testing schedules, work orders, test manuals, performance specifications, and schematics to determine testing procedure and equipment to be used.Tests functional performance of parts under specified environmental conditions such as temperature change, vibration, pressure, and humidity.Calibrates test instruments according to specifications.Connects unit to test equipment.Reads dials and digital displays that indicate electronic characteristics such as voltage, frequency, distortion, inductance, and capacitance.Compares results with specifications and records test data or plots test re

Irvine, CA • (39.7 miles) • Full Time • 9/15/2026

Individual Contributor in charge of performing, within his / her area of technological specification, tasks in the manufacturing process in accordance with the manufacturing documentation and the time allocated, using the resources available (including conventional and/or digital machine tools) and inspects his / her own work .As main missions : • Performs Manufacturing operations in accordance with the associated documentation and the time allocated, using the resources available • Is responsible for complex work and rework at unit and component level • Chooses and implements suitable methods, resources and procedures; • Brings support to the operators; • Initializes and manages continuous improvement actions in and around his/her area; • Performs final inspection duties when requested in

Santa Ana, CA • (32.4 miles) • Full Time • 9/14/2026

POSITION SUMMARYComposite Technician I is a hands-on role, whose primary responsibility is to build composite structures that meet company design specifications. This is an entry level position where on-the-job training can be provided.POSITION DUTIES/RESPONSIBILITES· Read and interpret work instructions.· Mold surface preparation and maintenance.· Composites material kitting.· Perform lamination of pre-preg composite materials.· Assemble/disassemble molds to yield conforming composite structures.· Perform vacuum bagging operations of small to medium composite structures.· Complete trimming/sanding operations, yielding close tolerances, using fixtures and various hand tools.REQUIRED QUALIFICATIONS· High attention to detail: Multiple pieces makes up the overall layup of parts. Each must be

City of Industry, CA • (26.5 miles) • Full Time • 9/13/2026

Our growing company is hiring an Production Assembler I in the Architectural Hardware Industry. To join our growing team, please review the list of responsibilities and qualifications. We look forward to reviewing your resume.The Production Assembler I is responsible for basic assembly work to assemble components as needed to customer orders and demands.The Production Assembler I will be responsible for the following:Ability to use light powered electrical or mechanical tools for assemblyTo complete daily production tasks as in numbers of orders/units completed in a single working cell or processing line based on demandsTo read and follow company documents - safety rules, operating instructions, policies and proceduresTo perform additional duties as designed (i.e. 5S events, lean manufactu

Fountain Valley, CA • (29.5 miles) • Full Time • 9/13/2026

1.0 OVERVIEWJoin our dynamic manufacturing team as an Assembly Technician - II, where you'll play a vital role in constructing high-quality products within a fast-paced factory environment. This position offers an exciting opportunity to develop your mechanical skills, work with advanced tools, and contribute to the production process that drives our success. As an integral part of our assembly line, you'll ensure that each component is assembled accurately and efficiently, supporting our commitment to excellence and innovation.AEROSPACE EXPERIENCE IS HIGHLY PREFERRED; IPC EXPERIENCE IS REQUIRED- PREVIOUS ASSEMBLY EXPERIENCE AS IT APPLIES TO OUR JOB SKILLS.THIS EXPERIENCE IS NOT REFLECTED IN THE BODY OF YOUR RESUME, YOU WILL NOT BE CONSIDERED- PLEASE INCLUDE DETAILS OF WHEN AND HOW YOU USE

Santa Ana, CA • (32.4 miles) • Full Time • 9/12/2026

For over 45 years, a leading Southern California Electronic Manufacturing Service (EMS) company, whose services include PCB assembly, electro-mechanical assembly and systems integration has been providing manufacturing services to the industrial, medical, aerospace, defense, and automotive markets. The Company has an excellent Through-Hole Hand Soldering Assembler opportunity due to exceptional growth over the past two years.Position Overview:The Selective Solder Machine Operator is responsible for setting up, operating, programming, monitoring, and maintaining selective soldering equipment used to solder through-hole components onto printed circuit boards (PCBs). The role ensures product quality, compliance with IPC standards, and safe operation of equipment.Key Responsibilities:Set up, o

Huntington Beach, CA • (27.6 miles) • Full Time • 9/11/2026

A well-established manufacturing company in Huntington Beach is seeking a Mechanical Assembler to join their production team.Responsibilities include:• Experience using hand tools• Experience using power toolsAssemble, repair, and disassemble pumps and related components• General mechanical assembly work• Assist with shipping and packaging as neededQualifications:• 2 years of mechanical assembly experience• 1 year of shipping or packaging experience• Reliable with a strong attendance recordPhysical requirements: Lifting requirements of up to 50 lbs. Standing for extended periods, repetitive hand movements, use of hand tools, and working in a manufacturing environment. Please submit your resume for immediate consideration.Monday–Friday from 7:00am–3:30pm

Fountain Valley, CA 92708 • (29.6 miles) • Full Time • 9/11/2026

For over fifty years, Custom Power has been a leader in the design and manufacturing of specialized battery packs and advanced battery management systems. Serving key industries such as medical, aerospace, defense, and industrial, we deliver high-quality, innovative solutions to our clients. As an ISO 9001, AS9100, and ITAR-registered company, Custom Power maintains the highest standards of quality and precision in everything we do.We are currently seeking a dedicated and detail-oriented Production Assembler to join our team. This position plays a critical role in assembling battery packs and battery management systems according to precise specifications and quality standards. The successful candidate will work hands-on with various components and tools, following assembly instructions, bl

Santa Ana, CA 92704 • (31.4 miles) • Full Time • 9/11/2026

Salary: $22 per hour + none Reference: 1167299-2 Job Description: The Assembler will timely and accurately build sub-assemblies and assemblies to customer specifications involving complex and repetitive wiring and mechanics for Power Distribution Units (PDU), and Transformers. In this function you will: Follow Standard Operating Procedures (SOPs) to build sub-assemblies and assemblies Use cranes to pick up, and move transformers and materials Be responsible for visual inspections of material before and after assembly Use various fixtures, gauges, hand tools and power tools to assemble, adjust, or repair product Perform point to point wiring during the assembling of Power Distribution Units Work with sheetmetal to build transformer legs and additional components related to transformer assem

Santa Ana, CA 92704 • (31.4 miles) • Full Time • 9/11/2026

RBC Bearings Incorporated(NYSE: RBC)is a leading international manufacturer of highly engineered precision bearings and components for the industrial, defense and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and engineered components requiring sophisticated design, testing and manufacturing capabilities for the diversified industrial, aerospace and defense markets. We currently have 60 facilities, of which 43 are manufacturing facilities in ten countries and our market capitalization is approximately $14.5 billion.JOB TITLE/LOCATION:Assembler - Mark & Pack – Santa Ana, CAEssential Functions of the Job:Operate marking equipment including electro-etching units, laser engravers, dot peening units, and i

Anaheim, CA • (31.7 miles) • Full Time • 9/11/2026

Location: Anaheim, CAPay: $17–$19/hr (DOE)Schedule: Full-Time | Monday–Friday 8:00am - 4:30pm | Overtime and weekends availableWe are seeking motivated individuals looking to grow in a Aerospace manufacturing company. This is a great opportunity to gain hands-on experience in aerospace manufacturing, with training, advancement opportunities, and consistent full-time hours.Responsibilities:Follow instructions to assemble componentsAdditional assigned general tasksMaintain a clean and orderly work areaQualifications:Previous experience in manufacturing, assembly, or other related fields preferred.Ability to thrive in a fast-paced environmentBasic math

Tustin, CA 92780 • (35.7 miles) • Full Time • 9/11/2026

Attalon is a leading technology partner to the global aerospace and defense industry, specializing in the physics of light and heat. With over 500 employees in the U.S., Attalon engineers critical optical, laser, and coating technologies that enable systems to see farther, target faster, and survive the harshest environments. From high-energy directed laser systems to satellite optics and hypersonic thermal protection, Attalon equips the warfighter with the advantage of precision. The Assembler III is an essential part of our manufacturing team, helping bring complex, highprecision products to life. In this role, you’ll assemble detailed components and products that meet strict quality and performance standards. You’ll work closely with our engineering and quality teams, collaborating to r

Pomona, CA • (37.9 miles) • Full Time • 9/11/2026

Overview AMI Precision Machining is hiring a Deburr Technician to finish tight-tolerance aerospace components at our Pomona facility. You'll remove burrs, break and blend edges, finish surfaces, and inspect completed parts against blueprints and specifications.Hands-on experience with deburring, grinding, polishing, metal finishing, or precision machining is preferred. Aerospace experience is helpful but not required. You should be able to read basic blueprints and work carefully with small tolerances. Familiarity with AS9100 is preferred, not required.Responsibilities Perform deburring operations on aerospace components using various hand tools and machinery.Inspect parts for quality and compliance with specifications.Maintain a clean and organized workspace to ensure safety and efficienc

El Segundo, CA 90245 • (0 miles) • Full Time • 9/10/2026

Overview We are seeking a dedicated and detail-oriented Harness Assembler to join our dynamic team in El Segundo, CA. In this role, you will play a critical part in the assembly of high-quality harnesses that meet our rigorous standards. If you have a passion for precision and enjoy working in a hands-on environment, we want to hear from you! Responsibilities Assemble electrical and mechanical harnesses according to specifications and blueprints.Conduct quality checks to ensure all products meet safety and performance standards.Utilize various tools and equipment to complete assembly tasks efficiently.Collaborate with team members to optimize assembly processes and improve productivity.Maintain a clean and organized workspace to promote safety and efficiency.Document assembly processes and

Torrance, CA • (6.7 miles) • Full Time • 9/10/2026

FLAG’s mission is to show our contractors & clients the best this industry can offer by upholding our principles of leadership, service, and exceptionalism.For a Best-in-Class experience, partner with FLAG and allow us to demonstrate how we’re changing the industry and how we can do the same for you.We are looking to hire an Assembly Technician for 1st shift in Torrance, CA 90502. This is a Direct Hire opportunity to join our FLAG Team!ASE Certified Master Technician – 1st ShiftLocation: Torrance, CA 90502Schedule: Monday – Friday | 5:00 AM – 1:30 PMOvertime: As NeededPay Rate: $30.00 – $40.00/hour DOEEmployment Type: Direct HirePosition Summary:We are seeking experienced Assembly Technicians with strong mechanical aptitude, automotive assembly experience, and exceptional attention to deta

Anaheim, CA 92806 • (31 miles) • Full Time • 9/10/2026

Position SummaryBCP Systems is seeking an experienced Assembler III to join our production team. This advanced-level assembly position is ideal for someone with strong experience in cable and wire harness manufacturing, electromechanical assembly, crimping, connector installation, and interpreting technical drawings and route sheets.The ideal candidate is detail-oriented, quality-focused, able to work independently, and experienced with the tools and equipment used in cable and electronic manufacturing.Key ResponsibilitiesBuild cable, wire harness, and electromechanical assemblies according to drawings, route sheets, customer requirements, and BCP Systems workmanship standards.Assemble and attach wires, connectors, sleeving, labels, and hardware.Strip, crimp, and prepare wire and other mat

Los Angeles, CA 91367 • (21.7 miles) • Full Time • 9/9/2026

About Panavision: The Panavision group supports filmmakers working on movies, television series, commercials, and beyond. Our family of brands provide filmmaking equipment rentals for lenses, cinema cameras, grip, and lighting, stage facilities for filming, and much more. Job Scope: Operate standard tooling machinery and assemble precision optical lenses. Key Responsibilities:Machine lens components according to engineering blueprints.Assemble lenses in compliance with Panavision specifications and quality standards.Design and fabricate tooling fixtures required for lens manufacturing.Modify existing components using conventional machining methods.Collaborate with the Optical department to troubleshoot issues.Perform daily machine cleaning and basic maintenance.Complete additional tasks an

Irvine, CA 92614 • (36.5 miles) • Full Time • 9/9/2026

Job Details:Job Title – AssemblerLocation – 17511 Armstrong Ave. Bldg 3, Irvine, CA, 92614Contract – 4+ months contractShift: M-F 3:00 PM to 11:30 PMDescription:Buffs or polishes small partstrims partscompletes simple assembly operations of large or medium-sized componentseither hand or machine assistedperforms repetitive work to meet company quotas.\nCompany DescriptionLanceSoft is rated as one of the largest staffing firms in the US by SIA. Our mission is to establish global cross-culture human connections that further the careers of our employees and strengthen the businesses of our clients. We are driven to use the power of our global network to connect businesses with the right people, and people with the right businesses without bias. We provide Global Workforce Solutions with a huma

Long Beach, CA • (15.8 miles) • Full Time • 9/9/2026

Title: Packaging Project Manager / Package DesignerLocation: Sterling, VAFulltime/PermanentJob OverviewThe organization is seeking a Packaging Project Manager / Package Designer to oversee the complete packaging development lifecycle. This role will be responsible for packaging project execution, supplier coordination, compliance, cost control, testing, and production implementation.The ideal candidate will serve as the central point of contact for packaging initiatives and work closely with cross-functional teams including Engineering, Manufacturing, Procurement, Quality Assurance, Supply Chain, and Regulatory Affairs.This position is focused on packaging project management, operational execution, and production support rather than graphic design or marketing activities.Key Responsibiliti

Anaheim, CA 92801 • (26.3 miles) • Full Time • 9/9/2026

Assembler Operations | Anaheim, CA | Full-TimeAbout KorrusKorrus is transforming the way people interact with light. We are the leader in human-centric lighting, built on more than 500 patents in spectral and circadian technology, and pioneers in Human Light Interaction, the next frontier in human health and wellness.That work runs on three fronts:• Ecosense. A globally known and respected leader in architectural and commercial lighting, and the business now bringing circadian technology into the spaces where people work, heal, learn, and gather.• OIO. Our consumer brand, bringing circadian lighting into the home: biologically aligned light, the right spectrum at the right time of day, to support how people wake, focus, and rest.• Everything else in Human Light Interaction. We are pushing

Los Angeles, CA 90025 • (9.2 miles) • Full Time • 9/8/2026

SCHEDULING ASSISTANTABOUT THE COMPANY Camden Center is a partial hospitalization and intensive outpatient treatment center that offers comprehensive, multi-disciplinary treatment for psychiatric and addictive disorders. Our staff is comprised of nationally recognized medical doctors, psychotherapists, and integrative medicine specialists who have been recruited as experts in their field to work with our patients. Camden Center is a medical organization established and operated by physicians, and is founded on the principles of clinical excellence, compassionate care, and respect for our patients.ABOUT THE POSITION The Scheduling Assistant provides clerical support to all Camden Center staff, including the Scheduling Department to ensure patient schedules are coordinated with provider sched

Hawthorne, CA • (3.1 miles) • Full Time • 9/6/2026

For nearly 30 years, SQA Services has been a leading provider of managed supplier quality services, offering audits, assessments, remote surveillance, corrective actions, remediation, inspections, and engineering solutions to manufacturers across all industries. We deliver these services by deploying a network of highly skilled associates based throughout the United States and in over 90 countries worldwide, ensuring rapid onsite support at your supplier locations. Our associates are expert quality assurance professionals with extensive experience and local expertise, enabling us to represent our clients on demand and with greater speed and efficiency than our competitors.We’re hiring for a Quality Electronics Inspector position in Hawthorne, CA. This is a 6 month long, full-time position,