Lompoc, CA 93437 • (43.3 miles) • Full Time • 9/4/2026

Benefits:401(k)Competitive salaryDental insuranceHealth insurancePaid time offTuition assistanceVision insurance We are seeking a Mechanical Engineer to serve as the launch pad responsible engineer for the mechanical and hydraulic systems located in Vandenberg, CA. This position will serve as the subject matter expert for these systems in all aspects of operation, maintenance and sustainment. This position will validate and execute the performance of these systems during launch operations. Key Duties:Own all aspects of the launch pad hydraulic systems used for the vehicle support strongback and the hold down release system.Serve as the subject matter expert for these systems during launch campaigns to validate system readiness and performance.Lead design reviews and collaborate with multid

Oxnard, CA 93036 • (42 miles) • Full Time • 9/3/2026

Offshore Operator 3 Note: Estimated annual pay based on an hourly schedule; $64K-$80,850KPURPOSE:Assist Lead Operators and Operator 2’s to operate and maintain oil and gas production and processing equipment and facilities in accordance with company policies and applicable regulatory statutes. Training will be required to become proficient in operations for elevation to Operator 2 status.GENERAL DESCRIPTION:Duties will include, but are not limited to, operate and troubleshoot oil and gas onshore process equipment, work with the Lead Operators and Operator 2’s to maintain production, and provide assistance in all maintenance programs. Monitor, operate, and maintain oil and gas treatment and processing equipment.ESSENTIAL JOB DUTIES AND RESPONSIBILITIES:Monitor, operate, and maintain oil and

Santa Barbara, CA 93103 • (10.1 miles) • Full Time • 9/2/2026

Job title: Equipment Wash TechnicianDepartment: Portable RestroomPOSITION SUMMARYThe Equipment Wash Technician is responsible for washing, inspecting and preparing sanitation equipment according to company standards. Assist with yard duties and preventative maintenance activities to help keep sanitation equipment and yard in good working condition.ESSENTIAL DUTIES AND RESPONSIBILITIESInclude but are not limited to the following. Pump, pressure wash portable restroom units, urinals, hand washing stations and event trailers.Use pressure washer to clean portable restroom equipment.Thoroughly inspect all sanitation equipment prior to delivery and when returned to the yard.Tag sanitation equipment that needs repair and/or place back in stock.Report any problems found with equipment immediately

Ventura, CA • (34.1 miles) • Full Time • 9/2/2026

Full-Time Conventional Manual Machinist Join Our Top in Class Manufacturing Team! Position Type: Full-Time | Experience Level: Skilled ProfessionalAbout the Opportunity We are seeking an exceptional Conventional Manual Machinist to join our elite manufacturing team. As a top-tier manufacturing company with a reputation for precision, quality, and innovation, we pride ourselves on employing the best craftspeople in the industry. This is an outstanding opportunity for a skilled machinist who takes pride in their work and wants to be part of a company that values traditional machining expertise combined with modern manufacturing excellence.Position Overview As a Conventional Manual Machinist, you will be responsible for setting up and operating various manual machine tools to produce precisi

Oxnard, CA 93032 • (42.3 miles) • Full Time • 9/2/2026

Marine Diesel & Generator Technician - $39.88 – $57.50 per hourQuinn Company, your local Caterpillar dealer, is hiring a Marine Diesel & Generator Technician to join our Power Systems team. If you have experience working on diesel engines, generators, marine engines, or power generation equipment, we want to hear from you. This position is ideal for a skilled technician who enjoys troubleshooting, diagnosing, repairing, and maintaining engines and generator systems.As a Quinn technician, you’ll work with Caterpillar equipment and technology while being part of an established team that values safety, quality workmanship, and professional growth.Location: Oxnard, CAPay: $33 – $57.50/hr (DOE) + Overtime + Full BenefitsWhat You’ll DoMarine diesel engines and generator setsEngine and generator

Santa Barbara, CA 93111 • (3.4 miles) • Full Time • 9/1/2026

About SonatechSonatech, LLC is a premier undersea acoustics engineering and manufacturing company. With a focus on supplying advanced SONAR solutions for the US Navy, our technical expertise, customized design capabilities and diverse manufacturing abilities have led to Sonatech products being deployed in virtually every class of underwater Navy system currently in operation.Located in beautiful Santa Barbara, CA, we pride ourselves on having a culture of innovation as well as first-class customer service. Sonatech has a challenging and rewarding work environment where employees have the opportunity to develop their careers by taking on new responsibilities and providing innovative solutions.Job Description and Key ResponsibilitiesThis is a senior-level position, reporting to the Transduce

Oxnard, CA 93030-8136 • (42.1 miles) • Full Time • 8/31/2026

We’re looking for a Head of Production to run day-to-day on the fabrication floor. This person keeps the shop organized, the team aligned, and the work moving deciding the right way to build things and ensuring the team executes consistently and efficiently.You’ll own the micro-level tasking and daily triage: assigning work, sorting priorities, coordinating people, and keeping every station productive. You’ll work closely with leadership in a tight two-way communication loop.This role is hands-on, people-driven, and technical. You should be someone who can lead by example, set the tone on the floor, and jump in on key fabrication work when needed.Compensation:$72,000 - $90,000 yearlyResponsibilities:Shop Floor LeadershipRun and maintain the daily shop plan: who is doing what, on which proj

Goleta, CA • (0 miles) • Full Time • 8/28/2026

We are looking for someone that wants to work hard. We want someone who will be able to grow within the company over time. This is difficult but rewarding work. Duties include all aspects of fence building. Digging holes. mixing concrete, installing fence boards, possible welding. Other requirements include: Valid California driver’s license Ability to follow instructions. Ability to follow detailed verbal instructions. Pride of workmanship. ReliabilityPAY $24-$28 (DOE) Regular full time employees are eligible for Medical Vision, and Dental insurance. Pension and profit sharing plan along with paid vacation #hc90563

Santa Barbara, CA 93108 • (14.6 miles) • Full Time • 8/27/2026

Description: The Lehrer Vocal Institute Production Manager (LVIPM) is responsible for the day-to-day production and stage management needs of the Music Academy’s summer vocal program, including one mainstage opera and up to two other smaller productions. This position reports to the Vice President of Artistic Planning and works closely with the Lehrer Vocal Institute Manager, Lehrer Vocal Institute Co-Directors, and vendors.Requirements: Lehrer Vocal Institute (LVI) ProductionsIdentify, hire, onboard, and coordinate responsibilities of the production team for the mainstage opera and up to two other smaller productions in consultation with the Artistic Operations departmentDevise, refine, update, manage, and communicate technical duties for the effective and timely preparation, rehearsal, a

Goleta, CA 93117 • (13.2 miles) • Full Time • 8/27/2026

Job Summary: We are seeking a skilled CNC Machinist to set up, operate, and maintain CNC machines to produce high-quality precision parts. The ideal candidate will have experience reading blueprints, using measuring tools, and ensuring that all products meet strict quality standards. Responsibilities:Set up and operate CNC machines, including mills, lathes, or grinders.Read and interpret technical drawings, blueprints, and work orders.Adjust machine settings, tooling, and offsets for optimal performance.Perform quality inspections using calipers, micrometers, and other measuring instruments.Troubleshoot and resolve machining issues to maintain production efficiency.Maintain machines, tools, and work area to ensure safety and functionality.Follow safety protocols and adhere to company polic

Goleta, CA 93117 • (13.2 miles) • Full Time • 8/27/2026

About Us LaunchPoint Electric Propulsion Solutions, Inc. is an aerospace power generation and electric propulsion design company that is committed to hiring the very best people to join our team. We are passionately focused on designing and manufacturing the best motor and controller solutions for aerospace, thermal management, power generation, and defense. We specialize in gensets, motors and controllers to enable efficient, power dense, reliable, lightweight hybrid-electric and full-electric propulsion solutions. Come join us in a rare opportunity to get in on the ground floor of a product destined to impact aerospace and advanced air mobility. About the Role LaunchPoint EPS is seeking a talented Senior Power Electronics Design Engineer to join our engineering team that is working on th

Lompoc, CA 93437 • (43.3 miles) • Full Time • 8/26/2026

Description: Purpose and Scope:Maintains Air Force Intercontinental Ballistic Missile (ICBM) Missile Procedures Trainers (MPTs) and ICBM Maintenance Training devices. The ICBM Training Device Technician-I applies basic technical knowledge to perform routine tasks under close supervision or from detailed procedures. Work is checked in progress or on completion. The Technician-I works under close supervision receiving technical guidance from a supervisor or higher-level technician. Work is checked frequently for accuracy. Guidance is readily available from superiors.Essential Responsibilities:Assembling or installing equipment or parts requiring simple wiring, soldering, or connectingPerforming simple or routine tasks or tests such as tensile or hardness testsOperating and adjusting simple t

Mission Hills, CA • (37.3 miles) • Full Time • 8/25/2026

Entry Level Shop Tech position available. Looking for a motivated individual wanting to expand their knowledge for general shop duties and interested in learning about the offroad world- Jeeps, Trucks & UTV's. Hours will be flexible 20-30 hours per week with the possibility of a Full-Time position in the future.Job Duties Include:Perform routine maintenance on vehiclesInstallation of offroad parts and accessoriesRemove and replace partsGeneral housekeepingHelp with organizing stockWashing customer vehiclesMust be a team player\nCompany DescriptionDirt Direct Motorsports is an offroad shop for Jeeps, trucks and SXSs located in the San Fernando Valley, CA . Always striving to provide our customers with knowledge and some of the best customer service. Having a brick and mortar location allows

Santa Barbara, CA • (8 miles) • Full Time • 8/25/2026

Umbra is an American space technology company delivering advanced systems, from sensors to spacecraft, that empower customers worldwide with unmatched access to critical information from space. Our mission is simple and ambitious: redefine spacefor people, systems, and missions in every domain. Umbra’s ecosystem operates through three business units: Remote Sensing (the data), Space Systems (the components), and Mission Solutions (the platforms).Together, our teams develop capabilities that deliver persistent access, resilient performance, and mission-ready solutions, advancing U.S. space leadership while keeping the world safe and informed.About the TeamSpace Systems – The ComponentsSpace Systems is where Umbra turns hardware and software designs into on-orbit realities; developing, imple

Santa Maria, CA 93455 • (44 miles) • Full Time • 8/23/2026

Electronic AssemblerGavial Enginering & Manufacturing specializes in the manufacturing of high-quality, high-reliability parts and systems. With a wide range of manufacturing, engineering and project management capabilities, Gavial supplies mission-critical equipment to industries that require the highest level of workmanship and quality.Gavial and its employees are dedicated to delivering the highest level of quality and service to its customers. The Gavial team draws upon decades of experience and knowledge to build high-quality, high-reliability parts and systems for some of the most demanding industries. We apply our Quality Assurance Program to strong processes, industry knowledge and dedicated people to deliver quality product on time.Assembler Job Summary: Gavial has an Electronics

Santa Barbara, CA 93103-3225 • (8 miles) • Full Time • 8/22/2026

Description: Overview:Take trays of fillets from the rack, salt as required per company salting procedures and return to the rack. Follow all company policies and procedures as required by The Food Safety and Quality Management System and other company systems as applicable.Apply salt to fish fillets according to established company salting procedures and product specifications. Remove trays of fillets from processing racks, evenly apply the required amount of salt, and return trays to the designated racks for curing. Ensure product quality, consistency, and proper handling throughout the salting process while maintaining production efficiency. Follow all food safety, quality, sanitation, and workplace safety requirements, including compliance with the company's Food Safety and Quality Man

Buellton, CA 93427 • (24.6 miles) • Full Time • 8/22/2026

Aero Industries, a division of Gavial Holdings, has been producing high quality parts, components, and housings for over 30 years. Aero Industries offers high precision, quick turn, machine-to-print service to the medical device, aerospace and other industries requiring quality products. We are committed to providing outstanding quality products, and on-time delivery.Under direct supervision, an entry level Deburr Hand / Machinist will load and unload machines and be responsible for in process inspection of machined product, which requires basic competencies in shop math, hand measuring tools and documentation, as well as basic print reading. Entry level machinists are responsible for some deburr operations as well as basic preventative machine maintenance and area cleanliness.Deburr Hand

Oxnard, CA 93030 • (42.2 miles) • Full Time • 9/16/2026

Job Title: AssemblerImmediately hiring assemblers and candidates with Automotive, woodshop, construction experience in OxnardRecent graduates that have hand and power tool experience encouraged to applyPay $20Shift: 1st start time 6:00am - 2:30pm plus overtimeLocation: Oxnard2nd shift availableJob DescriptionAssembling machines from the ground up.Using hand and power tools.Assemblies involve putting together parts ranging in size from small to large parts.Will be using written instructions on an iPad as well as follow some verbal when performing assemblies.SkillsAssemblyFollow written and verbal instructionsHand and Power toolsMechanically inclinedJob Type & LocationThis is a Contract to Hire position based out of Oxnard, CA.Pay and BenefitsThe pay range for this position is $20.00 - $22.0

Oxnard, CA 93030 • (42.2 miles) • Full Time • 9/15/2026

About Us Advanced Structural Technologies (AST) is a leading manufacturer specializing in forged, flow-formed, and machined products for the aerospace, defense, and automotive industries. With over 25 years of experience, AST has built a strong reputation for precision engineering, innovation, and high-quality manufacturing.Located in Oxnard, California, AST operates out of a cutting-edge facility spanning over 250,000 sq. ft., including our newest expansion completed in 2024. AST employs approximately 200 skilled professionals across multi-shift operations, ensuring efficiency, precision, and timely delivery for mission-critical industries.Position Overview We are looking for a CNC Lathe Setup Technician who takes pride in their craft and wants to work on parts that matter. A significant

Goleta, CA 93117 • (13.2 miles) • Full Time • 9/11/2026

Job Title - Machinist 2Job Location - 600 Pine Avenue, Goleta, California, United States of America, 93117 WORK SHIFT: 1st Shift (9/80A) DescriptionAt Northrop Grumman, we have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Northrop Grumman is looking for a Machinist Level 2 to support our Machine Shop department. As a member of the Machi

Ventura, CA • (34.1 miles) • Full Time • 9/7/2026

Position: Process Engineer (Weekend shift, F-M, 4/10’s)Vacancies: 1Department: EngineeringSupervisor: Senior Process EngineerPrepared by: Eric Baldwin, Timea SzavoSummary:As a Process Engineer you will be expected to safely perform the following functions: design, develop, test, and evaluate integrated systems for managing our industrial production processes; supervise and develop other production employees; manage preventative maintenance for key process equipment as well as downtime relating to maintenance; qualification of new machinery and process equipment; provide reporting to management on process issues and recommend process improvements. The Process Engineer will have a superior understanding of SRS equipment, machinery blueprints, process, and quality documentation. (i.e. in-proc

Goleta, CA 93117 • (13.2 miles) • Full Time • 9/5/2026

BASIC PURPOSE OF POSITION:The Company is seeking a highly motivated and technically skilled Process Control Engineer to support the safe, reliable, and efficient operation of the Company’s onshore and offshore oil & gas production facilities in California.This role is responsible for the engineering, configuration, maintenance, troubleshooting, optimization, and lifecycle management of Distributed Control Systems (DCS), PLCs, SCADA systems, industrial networks, and process automation infrastructure supporting production operations.The Engineer will work closely with Operations, Production Engineering, Facilities Engineering, Instrumentation & Electrical (I&E), Maintenance, and SCADA teams to improve process reliability, alarm management, operational efficiency, production uptime, and autom

Lompoc, CA 93437 • (43.3 miles) • Full Time • 9/5/2026

ABOUT FIREFLY AEROSPACEFirefly Aerospace is a space and defense technology company on a mission to reliably and repeatedly launch, land, and operate space systems from Earth to the Moon and beyond. As the partner of choice for critical space missions, Firefly is the first commercial company to launch a satellite to orbit with 24-hour notice and the first company to achieve a successful Moon landing. Headquartered in north Austin, Texas, Firefly is looking for passionate, hardworking innovators to join our team and help fuel our successful trajectory into space.SUMMARYThe Launch team is hiring for high-impact, dynamic engineering positions for those who thrive on solving real problems in diverse environments. We are looking for a propulsion and fluids systems engineer to join the team respo

Oxnard, CA 93030 • (42.2 miles) • Full Time • 9/3/2026

Join PTI Technologies in Oxnard, CA, as a Full-Time CNC Programmer and take your aerospace manufacturing career to new heights! This exciting opportunity allows you to work with cutting-edge 4-axis and 5-axis CNC machines, pushing the boundaries of precision engineering. Here, you'll collaborate with a team that values excellence and integrity, ensuring your skills contribute to high-performance projects in the aerospace sector.The hands-on, onsite nature of this position means you’ll directly impact our manufacturing processes and innovation. Embrace the chance to develop your expertise while working in a traditional environment that fosters growth and safety. With opportunities for problem-solving and creativity at every turn, you'll find your passion for CNC programming truly thrives.Yo

Goleta, CA 93117 • (13.2 miles) • Full Time • 9/2/2026

SUMMARY:Under the general guidance of the Manufacturing Engineering Manager, the Manufacturing Engineer develops and implements optimal, cost-effective manufacturing processes and methods in accordance with product specifications and quality standards. Recommend and lead improvements to production processes, methods, tooling and equipment. Identifies and recommends cost saving changes to existing products. Leads manufacturing launches for new or revised products. Manages various Engineering projects such as ECO, continuous improvement and Corrective Actions. Priorities include process development and improvement, problem resolution, project management and operator training.RESPONSIBILITIES:Participates in New Product Development teams with DFM input, while leading process, tooling and equi

Buellton, CA • (22.7 miles) • Full Time • 9/2/2026

Description: POSITION TITLE: CNC Operator I, II, IIIFLSA STATUS: Non-ExemptMANAGER JOB TITLE: CNC Lead / Director of ManufacturingFTE STATUS: Full-TimeDEPARTMENT: ManufacturingEXCELTAExcelta is a premier manufacturer of precision hand tools, specializing in tweezers, pliers, cutters, and small assembly instruments. With over 60 years of expertise, our tools are engineered to meet the highest standards of precision, reliability, and durability. Trusted by professionals in electronics, aerospace, medical device manufacturing, and other industries, Excelta offers a comprehensive range of products designed for intricate and delicate tasks. Our commitment to quality ensures that each tool delivers exceptional performance, making Excelta a trusted name in precision hand tools.JOB SUMMARY/PURPOSE

Ventura, CA • (34.1 miles) • Full Time • 8/31/2026

Brown & Sharpe MachinistNiche Top in Class Manufacturing CompanyJob Summary We are seeking a highly skilled and experienced Full-time Brown & Sharpe Machinist to join our top-tier manufacturing team. The ideal candidate will possess exceptional proficiency in set-up, operate, and optimize Brown & Sharpe Machines and other manual CAM Machines. This role is crucial in maintaining and enhancing our manufacturing capabilities, ensuring the production of high-quality components that meet stringent industry standards.Key Responsibilities Set-up, operate, and optimize Brown & Sharpe Machines and other manual CAM MachinesInterpret complex engineering drawings, blueprints, and specifications to produce precision tools and diesPerform preventive maintenance on tools, dies, and related equipment to

Santa Barbara, CA 93101 • (8.7 miles) • Full Time • 8/30/2026

Umbra is an American space technology company delivering advanced systems, from sensors to spacecraft, that empower customers worldwide with unmatched access to critical information from space. Our mission is simple and ambitious: redefine spacefor people, systems, and missions in every domain. Umbra’s ecosystem operates through three business units: Remote Sensing (the data), Space Systems (the components), and Mission Solutions (the platforms).Together, our teams develop capabilities that deliver persistent access, resilient performance, and mission-ready solutions, advancing U.S. space leadership while keeping the world safe and informed.About the TeamSpace Systems – The ComponentsSpace Systems is where Umbra turns hardware and software designs into on-orbit realities; developing, imple

Santa Maria, CA 93455 • (44 miles) • Full Time • 8/30/2026

We are seeking an experienced Manual Machinist to support a heavy industrial manufacturing facility. This role focuses on the fabrication, repair, and maintenance of precision parts, tooling, jigs, and dies used in plant equipment. This is a hands-on position operating manual machine tools (not CNC) and is ideal for machinists who take pride in precision work and equipment reliability.Key Responsibilities Set up and operate manual lathes, milling machines, grinders, and drill pressesFabricate and repair precision parts, tooling, fixtures, and plant componentsRead and interpret blueprints, technical drawings, and schematicsUse precision measuring tools including micrometers, calipers, and gaugesInspect finished parts to ensure compliance with specifications and quality standardsPerform rou

Oxnard, CA • (42.1 miles) • Full Time • 8/28/2026

TFX is looking for a highly skilled CAD designer/engineer to join our team. This role is for someone who is truly strong in CADnot just basic part modeling, but advanced surface modeling, complex geometry, and designing with real-world manufacturing in mind.We build a wide range of custom projects, so the right person needs to be extremely capable in CAD and comfortable working through challenging design problems. This is a hands-on, fast-moving environment where designs need to look right, function correctly, and actually be buildable.What We’re Looking For:Very strong CAD skills, especially surface modeling and complex part designExperience with multiple CAD platforms and the ability to learn new ones quicklyStrong understanding of how parts, assemblies, and products are actually manufac

Goleta, CA 93117 • (13.2 miles) • Full Time • 8/27/2026

Description: This is a Temp to Hire PositionRESPONSIBILITIES:· Will work in lean manufacturing work cells, performing final assembly of our IR camera products and core’s.· Responsibilities include following lean manufacturing processes and reading and following work instructions· Will be responsible for ensuring quality of work· Assemblers must demonstrate flexibility and the ability to learn new skills, as they are required to train and learn to assemble new products and work across various product linesSKILLS KNOWLEDGE AND ABILITIES:· Fine Motor Skills required to assemble small parts· Ability to use small tools and possess a great attention to detail· Ability to Read, Write, Speak, and comprehend English· Ability to follow verbal and written work instruction· Must have good interpersona

Goleta, CA 93117 • (13.2 miles) • Full Time • 8/27/2026

About Us LaunchPoint Electric Propulsion Solutions, Inc. is an aerospace power generation and electric propulsion design company that is committed to hiring the very best people to join our team. We are passionately focused on designing and manufacturing the best motor and controller solutions for aerospace, thermal management, power generation, and defense. We specialize in gensets, motors and controllers to enable efficient, power dense, reliable, lightweight hybrid-electric and full-electric propulsion solutions. Come join us in a rare opportunity to get in on the ground floor of a product destined to impact aerospace and advanced air mobility. About the Role LaunchPoint® is seeking a talented Electronics Hardware Design Engineer to join our engineering team that is working on the conti

Goleta, CA 93117 • (13.2 miles) • Full Time • 8/26/2026

ABOUTSYLUXSYLUX is an innovative companyspecializing ininfrared sensing and AI-drivenperceptiontechnologies for automotive safety. The company is committed to improving vehicle awareness and recognition capabilities in darkness, fog, glare, and other low-visibility environments. By combining infrared cameras, AI algorithms, and advancedperceptionplatforms, SYLUX helps next-generation ADAS and intelligent vehicles go beyond the limits of conventional sensors, enabling more consistent and reliable detection of pedestrians, cyclists, and other vulnerable road users, while setting a higher benchmark for future road safety.This infrared heritage also serves as the foundation for SYLUX’s expansion into broader ADASperceptionand intelligent sensing solutions.As a brand empowered by COMPAL, SYLUXb

Santa Barbara, CA 93111 • (3.4 miles) • Full Time • 8/24/2026

Sonatech, LLC is a premier undersea acoustics engineering and manufacturing company. With a focus on supplying advanced sonar solutions for the US Navy, our technical expertise, customized design capabilities and diverse manufacturing abilities have led to Sonatech products being deployed on virtually every class of underwater Navy system currently in operation.Located in beautiful Santa Barbara, CA we pride ourselves as having a culture of innovation as well as first-class customer service. Sonatech has a challenging and rewarding work environment where employees have the opportunity to develop their careers by taking on new responsibilities and providing innovative solutions.Position Summary: Under minimal supervision, the Prototype Manual Machinist will set up and operate Lathe and Mill

Goleta, CA 93117 • (13.2 miles) • Full Time • 8/24/2026

Company Description Join Seek Thermal – See the Unseen. Shape What’s Next.At Seek Thermal, we’re changing the way the world sees heat. Our innovative thermal imaging technology brings visibility to the unseen, empowering professionals and consumers to measure, detect, and visualize heat transforming how people work, protect, and explore.Job Description SUMMARY: Under the direct supervision of the Production Supervisor, Assemblers will be responsible for assembling our camera and core products.RESPONSIBILITIES: • Will work in lean manufacturing work cells, performing final assembly of our IR camera products and core’s. • Responsibilities include following lean manufacturing processes and reading and following work instructions • Will be responsible for ensuring quality of work • Assemblers

Lompoc, CA 93436 • (33 miles) • Full Time • 8/23/2026

ObjectiveUnder general direction, will provide onsite support in quality systems activities to assist in meeting company objectives and quality systems requirements.Essential Duties and Responsibilities include the following. Other duties may be assigned.Assist Quality Management in establishing, implementing and maintaining the quality management system.Review daily feedback, including customer complaints, non-conforming reports, Supplier quality issues, etc., and assess the need for Corrective Actions, including CAPA, reporting to Regulatory Authorities, post market surveillance and risk mitigation update.Review, update and monitor quality systems documentation (i.e. quality plans, post market surveillance, etc.) and maintain corresponding logs.Summarize monthly customer feedback, qualit

Santa Maria, CA 93455 • (44 miles) • Full Time • 8/22/2026

Quality Assurance ManagerGavial Engineering & Manufacturing specializes in the manufacturing of high-quality, high-reliability parts and systems. With a wide range of manufacturing, engineering and project management capabilities, Gavial supplies mission-critical equipment to industries that require the highest level of workmanship and quality.Gavial and its employees are dedicated to delivering the highest level of quality and service to its customers. The Gavial team draws upon decades of experience and knowledge to build high-quality, high-reliability parts and systems for some of the most demanding industries. We apply our Quality Assurance Program to strong processes, industry knowledge and dedicated people to deliver quality products on time.TheQuality Assurance Manager position at G

Oxnard, CA 93030-8136 • (42.1 miles) • Full Time • 9/17/2026

Fabricator – Composites & Specialty ManufacturingWe are looking for a skilled Fabricator to join our team. This role involves working with a variety of materials to build custom parts and assemblies from start to finish. While composites are a big part of our work, we are happy to train the right person in composite techniqueswhat we need is a strong fabricator who can problem-solve, work efficiently, and build high-quality parts.Compensation:$25 - $40 hourlyResponsibilities:Fabricate and assemble parts using wood, foam, metal, plastics, and composites.Use hand and power tools for cutting, shaping, sanding, and finishing.Follow engineering drawings, blueprints, and work instructions.Assist with mold making, assembly, and finishing as needed.Composite layup, vacuum bagging, and resin system

Santa Maria, CA 93455 • (44 miles) • Full Time • 9/16/2026

Position SummaryThe Industrial Maintenance Mechanic supports manufacturing operations by performing mechanical troubleshooting, repair, installation, and preventive maintenance on production equipment. This role plays a critical part in minimizing downtime and maintaining safe, efficient plant operations.Key Responsibilities Troubleshoot and repair mechanical issues on manufacturing equipment and systemsPerform equipment rebuilds, repairs, and new equipment installationsExecute preventive and predictive maintenance activitiesUse a computerized maintenance management system (CMMS) to document work and retrieve maintenance dataSupport capital projects, equipment upgrades, and plant expansion effortsMaintain high standards of housekeeping, organization, and safetyProvide coverage across shift

Oxnard, CA 93030 • (42.2 miles) • Full Time • 9/16/2026

Job Title: DeburrerJob DescriptionWe are seeking a diligent and detail-oriented Deburrer to join our team, responsible for polishing and cleaning metal parts to ensure they meet our high-quality standards.ResponsibilitiesDeburr, polish, and clean metal parts.Plug or cap all threaded hardware in/on parts presented by the moving line to meet time standards.Wear necessary safety equipment, including steel toe shoes, and eye and ear protection.Keep the work area clean and organized.Maintain cleanliness of Powdercoat equipment and area.Perform additional duties and projects as assigned.Essential SkillsExperience with grinding, production, and deburring.Strong attention to detail.Ability to lift 5 pounds consistently.Additional Skills & Qualifications1-2 years of experience in general labor or p

Oxnard, CA 93030 • (42.2 miles) • Full Time • 9/15/2026

ABOUT ASTAdvanced Structural Technologies (AST) designs and manufactures forged, flow-formed, spun, and machined structural components for the aerospace, defense, and automotive industries. With over 25 years of experience, AST has built a reputation for precision engineering, innovation, and high-quality manufacturing on parts where there is no margin for error.Headquartered in Oxnard, California, and operating across multiple production facilities, AST employs approximately 200 skilled professionals in multi-shift operations. Our components fly on programs for customers including SpaceX, Blue Origin, Firefly, Impulse Space, and the U.S. Army mission-critical hardware, built by people who take it personally.THE OPPORTUNITYWe're looking for a Manufacturing Design Engineer who will spend th