San Fernando, CA • (32.2 miles) • Full Time • 10/5/2026

Job Description As a Quality Engineer IV, you’ll serve as a senior technical resource for quality engineering, quality systems, customer quality, and manufacturing process improvement. You’ll lead high-impact initiatives that improve product quality, customer confidence, manufacturing performance, and cost of poor quality.This role supports bus transit technologies including doors, lifts, ramps, e-Bus charging systems, driver protection barriers, windows, and related subsystems. You’ll work across manufacturing, customers, suppliers, engineering, operations, sales, and supply chain to solve complex quality issues and drive practical improvements.How will you make a difference?You’ll lead complex 8D and DMAIC initiatives, support APQP/PPAP readiness, facilitate FMEA/PFMEA risk mitigation, s

Los Angeles, CA 91331 • (34.4 miles) • Full Time • 10/5/2026

Superior Thread Rolling Co.has been an industry leader in the Aerospace and Precision Machining business for over 70 years. We lead by developing "out-of-the-box" solutions to the constant changes in quality, administration, lean processes, and state-of-the-art technical systems required by Aerospace prime contractors and their supply chain. We strongly believe that the true reason behind our success is due to our loyal and dedicated team.POSITION SUMMARY:The team member is expected to take a wider view of their job and its impact on the organization. These Team members are responsible for the work center overall goals, organization, procedures, outcomes, attitude, education, expectations and work habits. Each team member shall strive to achieve all the levels within Job Level Matrix, whic

Montrose, CA 91020 • (38.5 miles) • Full Time • 10/5/2026

Job Summary:***This is a full time, in-office position with frequent overtime and rotating weekends.***The Patient Scheduling/Staffing Manager plans, organizes, directs, and manages all aspects of the clinician staffing department. Provides leadership, guidance, and direction for day-to-day operations and administrative activities, including the authority to make regarding department operations, administration. Leads and/or contributes to the short-term and long-term strategic planning, design, development and implementation of department objectives, processes, and standards.Beyond scheduling, the manager provides leadership, problem-solving, and strategic staffing oversight.KEY RESPONSIBILITIESManage daily staffing and scheduling for assigned geographic areas, and the areas of the team.Cr

Montrose, CA 91020 • (38.5 miles) • Full Time • 10/5/2026

Job Summary:***This is a full time, in-office position with frequent overtime and rotating weekends.***The Patient Scheduling/Staffing Manager plans, organizes, directs, and manages all aspects of the clinician staffing department. Provides leadership, guidance, and direction for day-to-day operations and administrative activities, including the authority to make regarding department operations, administration. Leads and/or contributes to the short-term and long-term strategic planning, design, development and implementation of department objectives, processes, and standards.Beyond scheduling, the manager provides leadership, problem-solving, and strategic staffing oversight.KEY RESPONSIBILITIESManage daily staffing and scheduling for assigned geographic areas, and the areas of the team.Cr

Glendale, CA 91201 • (40.6 miles) • Full Time • 10/5/2026

Job Title:Mechanical/Automation Engineer – Aerospace & Defense/Manufacturing (Mid-Level)Pay Range: ($38/hr-$50/hr, BOE)Location:Glendale, CA (100% On-Site)Job Type:Full-timeExperience Level: Mid-Level, 3-5 Yrs of ExperienceAbout Us:AtSMP Engineering, Incwe’re driven by innovation and excellence. As a leader in the Aerospace/Defense Manufacturing sector, we specialize in delivering high-quality solutions to clients across the globe. We’re looking for talentedhands-onMechanical Engineers with Automation experienceto join our growing team and help us push the boundaries of what’s possible.Key Responsibilities:Design, develop, and test mechanical/automation systems and components.Create detailed engineering drawings and specifications using CAD software (Solidworks), PLC'S, HMI'S, Python, LABV

Los Angeles, CA • (44.1 miles) • Full Time • 10/5/2026

We are seeking a Shop Heavy Equipment Mechanic to join our service team. In this role, you’ll work primarily in a shop environment performing diagnostics, maintenance, repairs, and rebuilds on Caterpillar® and other heavy equipment. You’ll help keep machinery running safely and reliably supporting both Quinn customers and internal teams.Position: Shop Technician Heavy Equipment MechanicLocation:Sylmar, CARate: $45.08-$57.54We Offer a Comprehensive Package:Career StabilityOpportunity for GrowthMedical, Dental, Vision401K with a MatchProfit SharingFlexible Spending AccountsBasic Life and AD&D InsuranceLead and Field PremiumCompany Provided UniformsLife Assistance ProgramCritical Illness InsurancePaid Vacation, Sick Time and HolidaysRequirements:Perform diagnostics, troubleshooting, repairs,

Los Angeles, CA • (44.1 miles) • Full Time • 10/5/2026

Divergent is building the new industrial age. Every day, our teams design, manufacture, and assemble advanced systems for some of the world's most demanding industries. Our integrated engineering and manufacturing platform transforms complex designs into production-ready solutions, helping customers move faster, build smarter, and deliver critical systems when they matter most. Divergent is a qualified Tier 1 supplier to global automotive OEMs and supports leading U.S. aerospace and defense companies.Join us and help push the boundaries of what can be built.Schedule This is a 3 - 4 x 11 rotating shift working alternating Wednesdays.Shifts Available:Sun - Wed 1st shift (5am - 4:30pm)Sun - Wed 2nd shift (4pm - 3:30am)Wed - Sat 1st shift (5 am - 4:30pm)Wed - Sat 2nd shift (4pm - 3:30am)A 6% s

Los Angeles, CA • (44.1 miles) • Full Time • 10/5/2026

Who We AreHi! We’re Thinkingbox, the brief to built agency. Creating innovative digital, experiential, social, and content, we partner with leading brands across industries like sports, gaming, entertainment, and technology. We believe the hands that carefully craft the work should belong to the minds that dreamed it. So while others pass the buck, we’re already building. Because our thinkers are also the makers. Culture is at the heart of who we are, and our offices are hubs of natural collaboration. From hanging out with our office dogs to enjoying Thursday happy hours, we keep our work environment vibrant, welcoming, and fun. Each year, we also encourage our people to spend a month exploring the world, whether that means working from another office or even from the beaches of Mexico, to

La Cañada Flintridge, CA 91011 • (38.5 miles) • Full Time • 10/4/2026

The Mechanical Thermal Engineer will support various projects located in Pasadena, California as part of the NASA/JPL MASS contract.The position will perform thermal and structural analyses of electronic hardware designs and systems/subsystems, including enclosures.RESPONSIBILITIES:Perform thermal and structural analyses of electronic hardware designs.Determine component temperatures for a variety of environments and assess random vibration fatigue life.Review analysis submitted by subcontractors to JPL projects.Support environmental test programs.Support program/project design reviews.Interact extensively with project personnel.Other duties as assigned.REQUIRED:This position has been posted at multiple levels (must meet minimum level indicated). Depending on the candidate's experience, re

Los Angeles, CA • (44.1 miles) • Full Time • 10/4/2026

Join the M & F TeamM & F Laundry is a growing commercial laundry company serving leading hotels and hospitality partners throughout Southern California.We're looking for dependable, hardworking team members to join ourIroning Department.Our team works with modern industrial laundry equipment to process thousands of pounds of hotel linen every day. We're looking for people who can work efficiently, maintain quality, and take pride in being part of a strong production team.What You'll DoFeed sheets, pillowcases, table linens, and other flatwork into industrial ironing equipmentInspect linen for stains, tears, wrinkles, and other quality issuesMaintain a consistent production pace while meeting quality standardsSeparate items that do not meet quality requirementsWork with your team to maintai

Los Angeles, CA • (44.1 miles) • Full Time • 10/4/2026

Integrated Magnetics is looking for an experienced CNC EDM Machinist to operate and maintain CNC EDM machines for the production of precision parts. The CNC EDM Machinist will play a critical role in the manufacturing process by setting up machines, programming, and producing high-quality components that meet exact specifications. This position supports our mission to deliver superior custom-engineered solutions to the military, government, aerospace, semiconductor, and medical sectors.Responsibilities include interpreting engineering drawings, programming and operating CNC EDM equipment, monitoring machine performance, performing quality inspections, and maintaining a clean and safe work area.Shift options include First Shift from 7:30 AM to 4:30 PM and Second Shift from 3:30 PM to 11:30

Los Angeles, CA 90046 • (44.6 miles) • Full Time • 10/4/2026

Job Description:Maintenance EngineerDepartment: Property OperationsReporting directly to:Director of FacilitiesJob Responsibilities:Perform general maintenance and repairs to guest rooms and public spaces as necessary.Respond to guest request involving the working order of objects in the guest room in a timely manner.Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items.Ability to install room fixtures such as lighting, TVs, telephones, curtain rods, speakers, iPods, computers, etc. as needed and requested.Performing routine preventive maintenance on g

Simi Valley, CA • (39.4 miles) • Full Time • 10/4/2026

Job SummaryThe Engineering Technician (Entry Level) supports the assembly and testing of RF Induction Systems and related power electronic assemblies. This is a hands-on role focused on build, basic testing and integration, and general shop support under the direction of senior engineers.Required ResponsibilitiesPerform basic electrical and mechanical assembly, testing and integration, and rework of RF Induction systems and sub-assemblies by following standard procedures and work instructions.Use common shop equipment and tools (hand tools, power tools, soldering irons, crimp tools, small benchtop equipment, basic 3D printers) in a safe and correct manner.Support prototype hardware builds, including:simple wiring harness assemblysetup and teardown of test equipmentAssist with part kitting,

Pasadena, CA 91124 • (43.7 miles) • Full Time • 10/4/2026

Electronics Maintenance Technician – 100% TravelLocation: 100% Travel – Projects typically require six weeks in the field followed by one week offEmployment Type: ContractCompensation: $32.00–$45.00/hourH&W Rate: $5.09/hr (paid in addition to hourly pay rate for the first 40 hours worked each week)Schedule: Monday–Thursday, approximately 7:00 AM–5:00 PM | Four 10-hour shifts, plus overtime as requiredPosition OverviewThe Electronics Maintenance Technician maintains, repairs, troubleshoots, modifies, and installs electronic equipment and related systems. Equipment may include telecommunications systems, radios, radar, navigational aids, fiber-optic systems, computers, industrial controls, measuring equipment, and other complex electronic devices.This position applies technical knowledge of

Los Angeles, CA • (44.1 miles) • Full Time • 10/4/2026

Job Title: SMT Machine Operator Summary: The SMT Operator is responsible for the setup, operation, and adjustment of surface-mount technology (SMT) equipment to assemble high-reliability circuit boards. This role requires attention to detail, adherence to quality standards, and the ability to work effectively in a fast-paced production environment. The operator collaborates with team members, supports quick-turn production, and contributes to continuous improvement initiatives. Primary Responsibilities: •Operate SMT pick-and-place equipment (Fuji and Mydata machines preferred) and other production machinery, including screen printers and reflow ovens •Perform routine setup, operation, calibration, and adjustments of production equipment to ensure optimal performance •Assemble high-reliabi

Los Angeles, CA • (44.1 miles) • Full Time • 10/4/2026

The RoleThe Vice President of Extraction & Formulation leads and oversees the entire extraction function across the organization, ensuring innovation, operational excellence, and consistent production of high-quality cannabis and hemp extracts within Vape, Concentrates, and Edibles categories. As a key member of the Operations Leadership Team, the Vice President is responsible for developing strategic initiatives to drive product quality, efficiency, and scalability of extraction processes, ensuring seamless technology transfer and execution across multiple facilities. This role plays a critical part in shaping the organization's future, collaborating with cross-functional teams, and scaling the extraction division to meet long-term business objectives.This is a remote position. Ability to

Lancaster, CA 93536 • (0 miles) • Full Time • 10/3/2026

Working at Pizza Hut is about making hungry people happy. It's about being independent and having fun, making new friends and earning extra cash. As a Pizza Hut team member, you can be the smiling face that greets and serves the customers, or a cook who make things happen in the kitchen. Working with us will give you the financial rewards and flexibility to suit your lifestyle. You'll learn new things, get recognized for your efforts and learn skills that last a lifetime.WHAT ARE WE LOOKING FOR?The good news is that your training will teach you everything you need to know to succeed on the job. But there are a few skills you should have from the get-go:You're a fun and friendly person who values customers and takes absolute pride in everything you do. Communication skills are key – you sho

Valencia, CA • (22.2 miles) • Full Time • 10/3/2026

DescriptionInspects electronic assemblies, subassemblies, parts, and components for defects by performing the following duties.Key ResponsibilitiesConducts variety of electronic tests on capacitors to ensure unit functions according to specifications or to detect if the capacitors fail.Reads test form to understand customer test specifications, works with backlog and WIP to locate parts in the computer system, read and understands test work instructions, performance according to specifications, and determine testing procedure and equipment to be used.Tests functional performance of parts under specified environmental conditions such as temperature change, voltage, and humidity. Sets up test instruments according to specifications.Connects capacitors to be tested to test equipment. Reads di

Los Angeles, CA 91605 • (37.7 miles) • Full Time • 10/3/2026

Role DescriptionThis is a full-time, on-site role for a Computer Numerical Control (CNC) Machinist located in Los Angeles, CA. The CNC Machinist will be responsible for operating and maintaining CNC machines, ensuring high-quality machining of parts, performing milling operations, and conducting quality control checks. The role requires adherence to safety protocols and specifications, as well as efficient production processes to meet tight tolerances and deadlines.QualificationsHigh school diploma or equivalent; technical certification or associate degree in related field is preferredExperience in Machine Operation and MachiningProficiency in Milling practices and techniquesStrong skills in Quality Control and adherence to specificationsFamiliarity with 3-axis CNC Machinery operationsAtte

Burbank, CA 91502 • (40 miles) • Full Time • 10/3/2026

Night Shift Machinist / Shop LeadLocation: Burbank, CAPay:$27.00 - $50.00 per hour Get a glimpse of our shop and team: Watch our videoAbout the JobWe're looking for an experienced Machinist/ Shop Lead for our Night Shiftto lead our manufacturing team. In this role, you'll combine hands-on CNC machining expertise with production leadership, overseeing night shift operations while ensuring safety, quality, productivity, and on-time delivery of precision aerospace components.This position is ideal for a skilled machinist who enjoys mentoring others, solving production challenges, and driving continuous improvement in a fast-paced manufacturing environment.What You’ll DoLead and support the night shift manufacturing team to a achieve production, quality, and safety goals Provide technical guid

Valencia, CA • (22.2 miles) • Full Time • 10/3/2026

Exciting opportunity for domestic & international travel! We are seeking an Aerospace Quality Control to join our team! You will conduct tests to determine the quality of materials and finished products as well as identify areas of improvement to increase efficiency.Responsibilities:Perform thorough examinations of all materials and finished productsConduct and report internal audits and evaluationsImplement and improve quality control operating proceduresIdentify and troubleshoot equipment problems and defectsParticipate in routine visual inspectionsMaintain a clean and safe work environmentQualifications:Previous work experience in quality control or other related fieldsStrong attention to detailStrong analytical and critical thinking skillsExcellent written and verbal communication skil

Valencia, CA 91355 • (25.3 miles) • Full Time • 10/3/2026

CNC Programmer I, 3 AxisFull Time + Benefits (Medical, Dental, Vision, 401k with Company Match, PTO)Job Type: OnsiteHourly Range: $26.00 - $39.00, DOEShift Differential: 10%Shift: 2ndLocation: Valencia, CAFralock is anengineered solutions provider of specialty components and subassemblies using advanced materials for high reliability, severe environment, and technically challenging applications. We develop and manufacture custom integrated solutions. Established in 1967, we are a critical solutions provider to Fortune 500 corporations, government, and targeted OEMs in a variety of industries including Semiconductor Equipment Manufacturing, Medical and Life Science,Aerospace and Defense, Industrial, Electronics, and Energy. Fralock is headquartered in Valencia, CA with manufacturing locatio

Simi Valley, CA 93063 • (35.1 miles) • Full Time • 10/3/2026

The Machine Operator is responsible for setting up and operating machinery to ensure efficient production processes. This role requires attention to detail and technical aptitude to maintain product quality and workflow.ResponsibilitiesSet up machines according to specificationsPreferred Qualifications1+ years in machine operationHigh school diploma or equivalentExperience with machine operation

Los Angeles, CA 91352 • (36 miles) • Full Time • 10/3/2026

Description: About UsFor 65 years, L.A. Gauge Company has set the standard for ultraprecision machining and optics, delivering the most reliable, complex, and mission-critical hardware for the aerospace, defense, and nuclear industries. We routinely hold machining tolerances of 40 millionths of an inch and achieve optical flatness to the 20th wave.Fueled by rapid growth, we continue to expand our operations and capabilities. We are looking for a highly motivated, hands-on CNC Programmer to help optimize production, drive innovation, and take our performance to the next level.Why Join Us?Work at the cutting edge of precision manufacturing and materials scienceDrive impact in industries where quality and reliability are mission-criticalBeing part of a high-growth environment with opportuniti

Los Angeles, CA • (44.1 miles) • Full Time • 10/3/2026

The Company AnySignal is developing the next generation of RF products and services for some of the most demanding space and defense missions. We’re building a flexible, high-performance platform that’s easy to deploy, monitor, and scale enabling customers to bring advanced radio technologies to life faster than ever before.The RoleAs a Digital Electrical Engineer on the hardware team, you will be responsible for owning the design, manufacture, test and deployment of highly integrated PCBAs used by a large number of space customers. You will work with a small team of software, RF hardware, and FPGA engineers to shepherd the product from initial design to vehicle integration, taking a full-stack approach to building robust space communication systems.ResponsibilitiesDesign high-speed digita

Los Angeles, CA • (44.1 miles) • Full Time • 10/3/2026

Salary:Up to $180,000 + discretionary year-end bonus + paid OT at 1.0xWe’re hiring a Senior Mechanical Engineer for a leading multidisciplinary engineering firm supporting complex building projects across Healthcare, Aerospace, Data Centers, Education, Federal/DoD, and other technically demanding environments**.This is a high-priority full-time opportunity with an established engineering organization, offering the chance to take a technical leadership role while working closely with clients, contractors, and multidisciplinary engineering teams.Location:Woodland Hills, CA Schedule:Hybrid 4 onsite / Friday remote Employment:Full-time Start:ASAP Interview:Single in-person interviewWhat You’ll DoLead mechanical design and project execution for complex building projects Design and oversee HVAC

Valencia, CA • (22.2 miles) • Full Time • 10/3/2026

Must have experience on lathe machines. Need to be comfortable with reading blueprints and doing setups. Must be able to maintain tight, aerospace tolerances.Position is full time, 40 hoursMonday-Thursday, 4 am - 230pmPay rate $25-$36 depending on experience level.Healthcare, 401K and profit-sharing options avalible.

Los Angeles, CA 91311 • (34.3 miles) • Full Time • 10/3/2026

Job type: Full TimeLength of Assignment: Temp-to-HireSchedule: Mon-Fri,2nd shiftLocation: Chatsworth, CALooking for a long-term opportunity in CNC machining? Apply today!Our client is seeking an experienced CNC Mill Machinist to set up and operate CNC milling machines, run and test part programs, and produce high-quality precision metal components. The ideal candidate has strong knowledge of CNC machining, blueprints, shop mathematics, measuring tools, and machine shop practices, along with the ability to troubleshoot and make adjustments to programs and equipment.What You’ll DoSet up and operate CNC milling machines to produce precision metal parts.Set up, test, and run CNC part programs while making adjustments as needed.Read and interpret blueprints in both standard and metric measureme

Los Angeles, CA 91311 • (34.3 miles) • Full Time • 10/3/2026

Hydraulics International, Inc. (HII) is seeking a Press Brake Operator – Sheet Metal I responsible for the setup, operation, and maintenance of press brake machinery used to bend, form, and shape metal materials. This position requires a strong understanding of machine operations, metalworking, blueprint reading, and quality inspection to ensure parts are produced accurately, safely, and efficiently.Key ResponsibilitiesSet up and operate press brake machines to bend, form, and shape metal materials according to blueprints, technical drawings, and work orders.Select the appropriate tools, dies, and machine settings for each job.Measure and inspect completed workpieces using calipers to ensure they meet quality and dimensional requirements.Follow all safety protocols, including the proper us

Simi Valley, CA • (39.4 miles) • Full Time • 10/3/2026

Job Title:IndustrialMaintenanceElectrician– Blown Film ManufacturingJob Location:Pacoima, CAJob Type: Full-timeSalary: DOEJob Summary: We are seeking a dedicated and skilledMaintenanceElectricianto join our blown film manufacturing facility. This role is critical in ensuring the continuous operation of our production lines by assisting in the maintenance, repair, and troubleshooting of machinery and equipment used in blown film production processes. The ideal candidate will have a basic understanding of industrial machinery, strong attention to safety, and a proactive approach to maintaining optimal facility conditions.Key Responsibilities:•Assist in performing routine maintenance and repairs on blown film machines, extrusion equipment, and other manufacturing tools and machinery.•Conduct

Glendale, CA • (40.3 miles) • Full Time • 10/3/2026

CNC Mill Machinist / ProgrammerGlendale, CAFull time - Temp to hire.Monday thru Friday 6:30am to 3pm$30hr to startBusy production shop specializing in micro abrasive sandblasting equipment and services is looking for a CNC Mill Machinist / Programmer to join their team in Glendale.Summary: The CNC Mill Machinist / Programmer will be responsible for programming, setting up, operating, and maintaining CNC milling equipment to produce precision components according to engineering drawings and specifications. The ideal candidate is detail-oriented, quality-focused, and capable of taking a job from programming and setup through final inspection.Responsibilities:Program, set up, and operate CNC milling machines for production runs and one-off components.Read and interpret engineering drawings, b

Los Angeles, CA • (44.1 miles) • Full Time • 10/3/2026

About SaylorSaylor is a social-led, entertainment-first creative agency based in Los Angeles. Founded by former entertainment executives, we set sail in 2021 to build an independent agency that rethinks how brands communicate with today's audiences.We believe every brand is an entertainment brand. That is why we craft ideas that move with culture, creating work that earns attention, sparks connection, and builds fandoms that last. Our clients include Netflix, Disney, Amazon, Hilton, Anthropologie, and more.We're a tightknit crew of creatives, strategists, and makers who collaborate without ego, stay curious, and always show up for one another. We foster a supportive space where diverse perspectives are celebrated, hierarchy never blocks great ideas, and everyone is empowered to jump in, so

Los Angeles, CA • (44.1 miles) • Full Time • 10/3/2026

Sr. Manufacturing Engineer (12 month contract, strong potential for conversion // Northridge, CA or San Diego, CA):Top Required Skills:Experience with medical device manufacturing line implementation and validation, ideally with automated and semi-automated equipment. Experience with process improvement methodologies, such as Lean/Six Sigma. Experience designing and optimizing manufacturing processes, equipment, layouts, material handling, and production workflows. Experience with assessment of NCRs/quality issues using problem solving tools (i.e., 5 Why, Fishbone Analysis, and Statistical Analysis) and RCA.Description:The Senior Manufacturing Engineer serves as the technical process owner responsible for manufacturing process validations, performance, equipment readiness, capacity expansi

Los Angeles, CA • (44.1 miles) • Full Time • 10/3/2026

Our client is seeking an experienced Hydraulic Power Unit Assembler with 10+ years of hands-on experience in the hydraulic industry. The ideal candidate will have strong mechanical skills and experience assembling, troubleshooting, repairing, and testing hydraulic systems and components.Key Responsibilities Assemble and install hydraulic power units, piping, tubing, hoses, pumps, valves, and related components.Read and understand hydraulic schematics and use them to assemble and troubleshoot systems.Fabricate and weld structural frames, brackets, and supports.Perform pipe fitting and hydraulic tubing installation.Bend and route hydraulic tubing according to system requirements.Build and install hydraulic hose assemblies.Troubleshoot hydraulic systems to identify leaks, pressure issues, flo

Los Angeles, CA • (44.1 miles) • Full Time • 10/3/2026

Every day, our team members do amazing things in pursuit of our shared purpose to build trust with our clients, partners, subcontractors, and teammates. No matter your background, education, or career path, if you share our vision to create extraordinary experiences, you belong at HITT.Commercial Construction Project Executive - Advanced ManufacturingJob Description:Job DescriptionThe Project Executive provides overall leadership and direction for advanced manufacturing construction projects from preconstruction through final completion and closeout. This individual is responsible for ensuring projects are delivered safely, on schedule, within budget, and in accordance with HITT’s quality standards.The ideal candidate will have significant experience delivering semiconductor facilities, cl

Los Angeles, CA • (44.1 miles) • Full Time • 10/3/2026

WelbeHealth is a value-based healthcare organization that's transforming the future of senior care by providing an all-inclusive care option to our most vulnerable senior population. We step in as the care provider and care planner that work to keep our participants within their communities, out of institutions, and cared for like family, all while receiving the healthcare and social services needed to thrive.Under the supervision of the Quality Operations Supervisor, the Quality Operations Coordinator (QOC) will be responsible for delivering excellent support and service to our PACE market operations through a process of record review to ensure a complete and accurate participant medical record. Responsibilities will include collecting data, auditing participant electronic health records

Los Angeles, CA • (44.1 miles) • Full Time • 10/3/2026

Quality Engineer - AS9100, RCCA, PFMEA (3+ yrs exp) - Onsite OnlySchedule: Full-time | Location: Los Angeles, CA Onsite Only | Pay: $50-$55 per hour | 12 months+ Contract (strong probability to go perm)NO SPONSORSHIPSJob Summary:This position is responsible for performing Quality Engineering duties to support hydromechanical/Electromechanical products in fabrication, assembly, and test. This position requires working on-site.

Los Angeles, CA • (44.1 miles) • Full Time • 10/3/2026

Arrowhead Pharmaceuticals, Inc. (Nasdaq ARWR) is a commercial stage biopharmaceutical company that develops medicines that treat intractable diseases by silencing the genes that cause them. Using a broad portfolio of RNA chemistries and efficient modes of delivery, Arrowhead therapies trigger the RNA interference mechanism to induce rapid, deep, and durable knockdown of target genes. RNA interference, or RNAi, is a mechanism present in living cells that inhibits the expression of a specific gene, thereby affecting the production of a specific protein. Arrowhead's RNAi-based therapeutics leverage this natural pathway of gene silencing.Arrowhead is focused on developing innovative drugs for diseases with a genetic basis, typically characterized by the overproduction of one or more proteins t

Los Angeles, CA • (44.1 miles) • Full Time • 10/3/2026

Hermeus is a venture-backed defense aviation company reclaiming the lost art of rapid iterative prototyping to build the fastest aircraft in the world today. By prioritizing relentless hardware iteration, we deliver high-speed systems at the pace of the modern battlefield. We work with the Department of War to provide the high-speed capabilities our nation and its allies need to maintain a durable, asymmetric advantage. About The Role: We are seeking aSheet Metal Shop Technician to for our 2nd shift to support precision fabrication of complex, tight-tolerance flight hardware. In this role, you will set up, operate, and maintain advanced sheet metal cutting and forming equipment to produce components that meet rigorous aerospace-quality standards. This is a hands-on, high-impact position w

Los Angeles, CA 91331 • (34.4 miles) • Full Time • 10/2/2026

Benefits:401(k)Bonus based on performanceCompany partiesCompetitive salaryOpportunity for advancementPaid time offTraining & developmentWellness resources Senior Machinist AS9100 Aerospace Machine Shop Location: Pacoima, California Company: American Precision Tool & Engineering, Inc. Compensation: Competitive and based on experience. American Precision Tool is an AS9100-certified aerospace and defense machine shop seeking an experienced Senior Machinist to join our growing team. We are looking for a hands-on machinist with strong setup, troubleshooting, and precision machining experience who can help transform engineering drawings into efficient, repeatable manufacturing processes. Responsibilities Set up and operate CNC mills and lathesReview engineering drawings and specificationsWork cl

Los Angeles, CA 91352 • (36 miles) • Full Time • 10/2/2026

Plastic Injection Molding Operator(2nd shift: 2:00 PM to 10:30 PM) WET (Design)Sun Valley, CaliforniaWET is the pioneering force behind groundbreaking fountain designs and engineering marvels worldwidefrom the Fountains of Bellagio to the awe-inspiring Dubai Fountain, the world’s largest choreographed fountain, and hundreds more. WET harnesses the elements of naturewater, fire, ice, fog, and lightto evoke emotion, transcend the ordinary, and captivate audiences around the globe.Position Summary The Plastic Injection Molding Operator is responsible for safely operating Arburg plastic injection molding machines to produce high-quality plastic components for WET’s proprietary products. This role focuses on following established work instructions, loading and unloading materials and parts, per